Answer:
To express the efficiency of a reaction, you can calculate the percent yield using this formula: %yield = (actual yield/theoretical yield) x 100. A percent yield of 90% means the reaction was 90% efficient, and 10% of the materials were wasted (they failed to react, or their products were not captured).
Explanation:
3. Determine the moles of sodium, Na, containing 7.9x1024 atoms.
Answer:
12.7mol Na.
Explanation:
Hello there!
In this case, according to the concept of mole, which stands for the amount of substance, we can recall the concept of Avogadro's number whereby we understand that one mole of any substance contains 6.022x10²³ particles, for the given atoms of sodium, we can calculate the moles as shown below:
[tex]7.9x10^{23}atoms*\frac{1mol}{6.022x10^{23}atoms} \\\\[/tex]
Thus, by performing the division we obtain:
[tex]12.7molNa[/tex]
Regards!
PLEASE HELP Describe at least two advantages and two disadvantages of using hydropower as a
source of energy.
PLS ONLY ANSWER THE FULL QUESTION ON HERE DO NOT SEND A LINK FOR ME TO CLICK!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
Advantage: Hydropower is a fueled by water, so it's a clean fuel source.
Advantage: It is a domestic source of energy in the US.
Disadvantage: Fish populations can be impacted if fish cannot migrate upstream past impoundment dams to spawning grounds or if they cannot migrate downstream to the ocean.
Disadvantage: Hydropower plants can be impacted by drought. When water is not available, the hydropower plants can't produce electricity.
Explanation:
What type of molecule is 2-methylpentene?
O A. Alkane
O B. Branched alkene
O C. Alkyne
O D. Cyclic
Answer:
B. Branched Alkene
HOPE THIS HELPS :-)
If one of these stars happens to be blue, which star is most likely to be that color?
Answer:
(D) 15,000
Explanation:
I took the test trust me.
Answer:
D
Blue stars are the hottest ones, so the hottest of these stars should be a blue one.
Hope that helps! :)
-Aphrodite
Explanation:
During energy conversions, some energy is always lost as _____.
heat
electricity
chemical energy
light
Answer:
electricity
Explanation:
I know this because I am currently learning about this and remember doing it
4NH3 + 502 - 6H20 + 4NO
How many grams of O2 are required to produce 0.3 mol of H20?
4NH3 + 5O2 --> 6H2O + 4NO
How mant grams of NO are produced from 1.55 mol of NH3?
4NH3 + 5O2 --> 6H2O + 4NO
How many grams of NO is produced if 12g of 02 is combined with ammonia?
Explanation:
4NH3 + 502 - 6H20 + 4NO
How many grams of O2 are required to produce 0.3 mol of H20?
4NH3 + 5O2 --> 6H2O + 4NO
How mant grams of NO are produced from 1.55 mol of NH3?
4NH3 + 5O2 --> 6H2O + 4NO
How many grams of NO is produced if 12g of 02 is combined with ammonia?
Here are the atomic masses of hypothetical elements:
X = 13.25 amu
Y = 69.23 amu
Z = 109.34 amu
3.8 moles of X2Y5Z3 is equivalent to how many grams?
Enter your answer to zero decimal places (round to the ones place). Do
not include the units of "g", just the numerical answer.
Answer:
2663 g
Explanation:
We'll begin by calculating the molar mass Of X₂Y₅Z₃. This can be obtained as follow:
Molar mass of X₂Y₅Z₃ = (13.25×2) + (69.23×5) + (109.34×3)
= 26.5 + 346.15 + 328.02
= 700.67 g/mol
Finally, we shall determine the mass of 3.8 moles of X₂Y₅Z₃. This can be obtained as follow:
Molar mass of X₂Y₅Z₃ = 700.67 g/mol
Mole of X₂Y₅Z₃ = 3.8 moles
Mass of X₂Y₅Z₃ =?
Mass = mole × molar mass
Mass of X₂Y₅Z₃ = 3.8 × 700.67
Mass of X₂Y₅Z₃ = 2663 g
Therefore, the of 3.8 moles of X₂Y₅Z₃ is
2663 g
A 35 Liter tank of Oxygen is at 315 K with an internal pressure of 190 atmospheres. How many moles of gas does the tank contain?
Describe one way that carbon and silicon are alike.
ASAP
Answer:
they have the same density
What is the mass (in grams) of 2.55 x 1022 molecules of water?
Explanation:
hope the picture above make sense:)
1) Heat is the ______ of energy and a unit is ____.
A: Measure; Joule
B: Measure; Kelvin
C: Movement; Kelvin
D: Movement; Joule
2) ______ is the internal energy of particles and when this motion is measured, the unit used is ___.
A: Heat; Joule
B: Thermal Energy; Kelvin
C: Thermal Energy; Joule
D: Heat; Kelvin
Answer:
Q1) B
Q2) C
Kelvin is the SI unit of temperature.
A chemistry student heated 2.255 g of oxygen gas in the presence of 5.145
Answer:
a
Explanation:
I need help to get the correct answers for this task.
Answer:
*Numbering from left to right.
Synthesis: 1,2,9
Decomposition: 4,7,11
Single Replacement: 3,6
Double Replacement: 5,8,10, 12
Explanation:
Synthesis=A+B->AB; 2 separate elements getting together
Decomposition=AB->A+B; 2 Elements that are bonded separating
Single Replacement=A+BC->AX+B; a single swap
Double replacement=AX+BY-> AY+BX; a double swap
How do conduction, convection, and radiation redistribute incoming solar energy?
The solar energy from sun is radiating to the earth's surface and making the atmosphere warmer. The heat energy is redistributing back by through different heat transfer modes.
What is heat transfer?Heat energy transfer from hotter region to colder region by the temperature gradient. The heat is transferring through solids by conduction. Conduction is the process of heat transfer through the closely packed particles in solids.
Heat transfers through convection in liquids. Where the hot molecules rise to the surface and transfers the heat to other molecules. The heat radiated to the earth make the sources in earth warmer. Through convection, the water molecules heat up.
The water vapor formed by convection process radiates to the atmosphere and redistributes the energy back.
To find more on radiation, refer here:
https://brainly.com/question/13934832
#SPJ2
3. Bacteria communicate with each other through electronic pulses.
O True
O False
Answer:
All in All, All in All.
Explanation:
Explain why bicarbonate soda would be the best option to treat a bee sting?
soda is fuzzy and can help heal the swell caused by a bee sting
Carbon-11 decays by position emission.The nuclide formed product is
Answer:
They demonstrated that carbon-11 decays by positron emission to the stable nuclide 11B [Eq. (1)].
Bears stop coming to a river ecosystem where they have been eating many fish each day. The fish the bears eat normally eat smaller fish, which eat plants along the river bottom.
What happens to the ecosystem?
Both the larger and the smaller fish populations grow quickly but then die out because the plant life is insufficient for them all to eat.
The larger fish population will drop first, and the smaller fish population will grow quickly. The plants will die off because too many of the smaller fish are eating them.
The larger fish population explodes at first, and the smaller fish population begins to drop. Eventually, the river runs out of smaller fish so larger fish die out, and the plant population grows.
The smaller fish population begins to eat more plants and to grow. The larger fish have more food to eat so their population is able to grow, too.
Answer:
The larger fish population explodes at first, and the smaller fish population begins to drop. Eventually, the river runs out of smaller fish so larger fish die out, and the plant population grows.
Explanation:
how do you solve the expending form for 3(2+5)
Answer:
it's expanding from is 15
Answer:
Explanation:
3( 2+5 )
3. ( 7 )
3 . 7= 21
have a good day!Calculate the final concentration of each of the following:
2.0 L of a 6.0 M HCl solution is added to water so that the final volume is 6.0 L
--
Water is added to 0.50 L of a 12 M NaOH solution to make a 3.0 L of a diluted NaOH solution
Answer:
1. 2 M
2. 2 M
Explanation:
1. Determination of the final concentration.
Initial Volume (V₁) = 2 L
Initial concentration (C₁) = 6 M
Final volume (V₂) = 6 L
Final concentration (C₂) =?
The final concentration can be obtained as follow:
C₁V₁ = C₂V₂
6 × 2 = C₂ × 6
12 = C₂ × 6
Divide both side by 6
C₂ = 12 / 6
C₂ = 2 M
Therefore, the final concentration of the solution is 2 M
2. Determination of the final concentration.
Initial Volume (V₁) = 0.5 L
Initial concentration (C₁) = 12 M
Final volume (V₂) = 3 L
Final concentration (C₂) =?
The final concentration can be obtained as follow:
C₁V₁ = C₂V₂
12 × 0.5 = C₂ × 3
6 = C₂ × 3
Divide both side by 3
C₂ = 6 / 3
C₂ = 2 M
Therefore, the final concentration of the solution is 2 M
how many liters of N2 gas is needed to produce 500 L NH3?
An organism is living in a rapidly changing environment. Sexual reproduction is advantageous to an organism in this situation because–
sexual reproduction produces more offspring than asexual reproduction within a given time period.
sexual reproduction produces offspring with more variation, some of which may be better adapted to a new environment.
sexual reproduction requires more time to complete, allowing the environment to become more stable.
offspring produced by sexual reproduction grows to maturity more rapidly.
Answer:
sexual reproduction produces offspring with more variation, some of which may be better adapted to a new environment.
Explanation:
this allows more of the organisms to survive a change in the environment
Answer:
sexual reproduction produces offspring with more variation, some of which may be better adapted to a new environment.
Explanation:
Generally the ionization potential in a period increases, but there are some exceptions. The one which is not an exception is
1) Be & B 2) N & O 3) Mg & Al 4) Na & Mg
Answer:
Generally, the first ionisation energy increases along a period. But there are some exceptions one which is not an exception
What is the molarity of a solution containing 7.47 moles of solute in 4.31 liters of
solvent?
Answer:
1.73 M
Explanation:
Molarity is moles per liter, so we need to divide 7.47 moles by 4.31 liters to get the molarity of the solution.
7.47/4.31 ≈ 1.73 M
12. Photosynthesis builds sugars out of small molecules, making it an
Answer:
Condensation reaction/ direct synthesis reaction
Explanation:
Combines simple molecules to form complex molecules producing water
Final volume of a .50 M H3PO4 solution prepared from 50 mL of a 6 M H3PO4 solution
Answer:
600 mL
Explanation:
From the question given above, the following data were obtained:
Initial concentration (C₁) = 6 M
Initial volume (V₁) = 50 mL
Final concentration (C₂) = 0.5 M
Final volume (V₂) =?
Using the dilution formula (i.e C₁V₁ = C₂V₂) we can obtain the final volume as illustrated below:
C₁V₁ = C₂V₂
6 × 50 = 0.5 × V₂
300 = 0.5 × V₂
Divide both side by 0.5
V₂ = 300 / 0.5
V₂ = 600 mL
Thus, the final volume is 600 mL
The solution you identified in question (1) acts as a buffer due to reactions that occur within the solution when an acid or a base is added. Write the net ionic chemical equation for the reaction that occurs within this buffer solution when HCl(aq) is added. (Phase labels should be included in all net ionic chemical equations.)
Answer:
The answer is "[tex]\bold{CH_3COO^{-} \ (aq) + H^{+}\ (aq) \longrightarrow CH_3COOH \ (aq)}[/tex]"
Explanation:
When [tex]HCI[/tex] is added in the chemical equation it reacts with sodium acetate so, it will give the following chemical equation:
[tex]CH_3COONa\ (aq) + HCl\ (aq)\longrightarrow CH_3COOH\ (aq) + NaCl\ (aq)\\\\[/tex]
In this, the [tex]CH_3COOH[/tex] is a weak acid so, it not completely dissociated.
[tex]CH_3COONa \ (aq) \ \ and \ NaCl[/tex] were strong electrolytes they are completely dissociated.
The [tex]HCl[/tex] is a strong acid so, it is completely dissociated So, the net ionic equation is:
[tex]CH_3COO^{-} \ (aq) + H^{+}\ (aq) \longrightarrow CH_3COOH \ (aq)[/tex]
A 27.5g piece of aluminum sits in a room and cools. It loses 6120.0 J of heat. If the initial
temperature of aluminum is 157.3°C, what is the final temperature? The specific heat
capacity of aluminum is 0.900 J/gºC.
Answer:
[tex]T_2= -90.0°C[/tex]
Explanation:
Hello!
In this case, according to the given description of how the temperature changes for aluminum in agreement to the loss of heat of 6120.0 J, we can use the following equation:
[tex]Q=mC\Delta T=mC(T_2-T_1)\\\\[/tex]
Thus, by knowing Q, m, C and the initial temperature, we are able to obtain:
[tex]T_2=T_1+\frac{Q}{mC}\\\\T_2=157.3\°C+\frac{-6120.0J}{27.5g*0.900 J/g\ºC}\\\\T_2= -90.0°C[/tex]
Regards!
How many grams are there in 1.8055 x 10^25 molecules of sodium sulfate? Hint: Convert to moles first
Answer:
4258.82 g of Na₂SO₄
Explanation:
From the question given above, the following data were obtained;
Number of molecules of Na₂SO₄ = 1.8055x10²⁵ molecules.
Number of mole of Na₂SO₄ =?
From Avogadro's hypothesis,
6.02×10²³ molecules = 1 mole
Therefore,
6.02×10²³ molecules = 1 mole of Na₂SO₄
Next, we shall determine the mass of 1 mole of Na₂SO₄. This can be obtained as follow:
1 mole of Na₂SO₄ = (23×2) + 32 + (16×4)
= 46 + 32 + 64
= 142 g
Thus,
6.02×10²³ molecules = 142 g of Na₂SO₄
Finally, we shall determine the mass of Na₂SO₄ that contains 1.8055x10²⁵ molecules. This can be obtained as follow:
6.02×10²³ molecules = 142 g of Na₂SO₄
Therefore,
1.8055x10²⁵ molecules
= (1.8055x10²⁵ × 142) / 6.02×10²³
= 4258.82 g of Na₂SO₄
Thus, 4258.82 g of Na₂SO₄ contains 1.8055x10²⁵ molecules
what are the physical properties of matter?
Answer:
Physical properties are typically things you can detect with your senses.
Explanation: