An example of Pv4 addresses that is a public IP address is
An example of a public IPv4 address is "8.8.8.8". This is a public IP address that is assigned to one of Go ogle's DNS servers. Any device connected to the Internet can use this IP address to resolve domain names and access websites.What is the IP address about?
A public IP address is a globally unique IP address that is assigned to a device or computer that is connected to the Internet. Public IP addresses are used to identify devices on the Internet and are reachable from any device connected to the Internet.
On the other hand, private IP addresses are used within a local area network (LAN) or within a private network, and are not reachable from the Internet.
They are used to identify devices within a local network, such as a home or office network. Private IP addresses are not unique and can be used by multiple devices within a LAN.
Learn more about IP addresses from
https://brainly.com/question/30018838
#SPJ1
You are given a design board with four input pins a 4-bit INDATA,
1-bit Load,Enable, and Clock; and one output, a 4-bit OUTDATA.
Build a sequential circuit that contains a register (Don’t forget to
trigger that register by the FALLING edge of the clock, Logisim’s default
is the opposite!).
The register is updated every clock cycle in which Enable is up. If
Load is down, the register is incremented, otherwise it is loaded with the
data asserted on the INDATA pin.
The register data output should be connected with the output pin
OUTDATA.
The steps to Build a sequential circuit that contains a register is given below
The first step is to connect the 4-bit INDATA input to the data input of a 4-bit register.Next, we need to connect the Load and Enable inputs to a multiplexer. The multiplexer will be used to select between the INDATA input and the output of the register.The multiplexer output should be connected to the input of the register.We also need to create an AND gate that will be used to trigger the register on the falling edge of the clock. The AND gate should have the Clock input as well as the Enable input as its inputs.The output of the AND gate should be connected to the clock input of the register.The output of the register should be connected to the OUTDATA output.Create a NOT gate and connect the Load input to it, and connect the output of the NOT gate to one of the multiplexer input.Connect the output of the register to the second input of the multiplexer.What is the design board about?To build a sequential circuit that contains a register, we can use a combination of logic gates, flip-flops, and multiplexers.
In the above way, the register will be updated every clock cycle in which the Enable input is high. If the Load input is low, the multiplexer will select the output of the register and it will be incremented.
Otherwise, the multiplexer will select the INDATA input and the register will be loaded with the data asserted on the INDATA pin. The output of the register will be connected to the OUTDATA output, providing the register data.
Learn more about design board from
https://brainly.com/question/28721884
#SPJ1
which function in the random library will generate a random integer within a range of specified by two parameters? the range is inclusive of the two parameters
Ran dint Python function is the function in the random library will generate a random integer within a range of specified by two parameters.
What is Ran dint Python function?With both inclusive parameters, the randint Python method returns an integer that was created at random from the provided range.
The randint() method provides a selected integer number from the given range. Note that randrange(start, stop+1) is an alias for this technique.
A value from a list or dictionary will be generated by the random command. And the randint command will choose an integer value at random from the provided list or dictionary.
Thus, Ran dint Python function.
For more information about Ran dint Python function, click here:
https://brainly.com/question/29823170
#SPJ1
What type of light comes from reflections off other objects?
In what ways does a computer network make setting appointments easier?
A) by providing a common calendar
B) by reassigning workloads to enable attendance
C) by sending out invitations
D) by telephoning those involved
E) by sending electronic reminders
The best option is A) by providing a common calendar. A common calendar can be used to check availability and schedule appointments, making the process of setting appointments easier.
However...
All of the options (A, C, D, and E) could potentially make setting appointments easier on a computer network.
A) A common calendar can be used to check availability and schedule appointments.
B) Workloads could be reassigned to enable attendance at appointments, but this is not directly related to the use of a computer network.
C) Invitations to appointments can be sent electronically through the network.
D) Telephone calls can be made through the network.
E) Electronic reminders can be sent through the network to help ensure that appointments are not forgotten.
Why did Madison recommend a server-based network for SEAT?
A) It provides centralized access to resources.
B) It is simpler to expand.
C) It is easier to operate.
D) It is less expensive.
E) It provides more security.
Code to be written in Python
Will award brainliest automatically if correct!
Suppose that you have a list of numbers, and you need to normalize the list, i.e., the sum of all numbers in the list is equal to 1.
Tam came out with an implementation:
def normalize(lst):
s = sum(lst)
return list(map(lambda v: v / s, lst))
This code works correctly for normalize([1, 2, 5, 4]) but fails for normalize([1, 2, -7, 4]). What causes the second test case to fail?
Find out the error message and keep the list as it is when the error occurs by simply return the list. So without modifying the normalize function, implement this strategy in the safe_normalize function. Complete safe_normalize. You may assume that the normalize function has already been defined for you.
def safe_normalize(lst):
# handle the error
return normalize(lst)
Test Cases:
safe_normalize([1, 2, 2, 3]) [0.125, 0.25, 0.25, 0.375]
safe_normalize([1, 2, -5, 2]) [1, 2, -5, 2]
Here is an implementation of the safe_normalize function that catches the error and returns the original list if an error occurs:
def safe_normalize(lst):
try:
return normalize(lst)
except ZeroDivisionError:
return lst
This function calls the normalize function, which takes a list as input and returns a normalized list. However, if an error occurs (in this case, a ZeroDivisionError), the function will catch the error and return the original list instead.
To test the safe_normalize function, you can use the following test cases:
print(safe_normalize([1, 2, 2, 3])) # Expected output: [0.125, 0.25, 0.25, 0.375]
print(safe_normalize([1, 2, -5, 2])) # Expected output: [1, 2, -5, 2]
The first test case should return the normalized list, while the second test case should return the original list, since the normalize function would fail with a ZeroDivisionError if passed a list with a negative sum.
Hope This Helps You!
use router,switches and Hubs to design a simple network for maendeleo institute of Technology having 240 employees.The institute have five department: computer science has 100 employees ,information technology 60 employees ,Account 40 employees ,Human resource has 20 employees and marketing has 20 employees . Require: .network topology showing five network that corresponding to five department .use class C IP addresses (example 192.168.10.0/24) to show subnet ID and broadcast ID of each department , the IP address must not overlap .consider scalability .Give reason for your choice /decision
Answer:
To design a simple network for Maendeleo Institute of Technology with 240 employees, we could use a combination of routers, switches, and hubs.
Our network would consist of five separate networks, one for each department at the institute. We would use class C IP addresses, with a subnet mask of /24, to create the following subnets:
Computer Science department: 192.168.10.0/24
Information Technology department: 192.168.11.0/24
Account department: 192.168.12.0/24
Human Resource department: 192.168.13.0/24
Marketing department: 192.168.14.0/24
Each department would be connected to the network via a switch, which would allow for communication within the department and with other departments as needed. A router would be used to connect the individual department networks to the wider internet, and would also serve as a firewall to protect the network from external threats.
We would also include a hub in the network to allow for communication between devices within a department, as well as to provide additional connectivity and scalability.
Overall, our network design would provide each department with its own separate network, with the ability to communicate with other departments as needed. It would also be scalable, allowing for the addition of new devices and departments as the institute grows. The use of class C IP addresses and a /24 subnet mask would ensure that IP addresses do not overlap, ensuring efficient and reliable communication within the network.
solve the MRS y,x = 12 mean? for constant mariginal utility?
answer
The MRS y,x = 12 means that the ratio of marginal utilities between two goods (y and x) is 12. This means that for every 12 units of good y the consumer will give up 1 unit of good x. This holds true if the consumer has constant marginal utility.
Try it
Drag and drop each example under the appropriate heading.
taking breaks
reading in a crowded room
having resources nearby
cramming at the last minute
getting plenty of rest
starting your homework late at night
Intro
Good Study Habits
Bad Study Habits
Done
Bad habits include reading in a crowded room, starting your schoolwork late at night, and cramming right before the exam. Good habits include taking breaks, having resources close by, and getting lots of rest.
What are some poor study habits?Being uncoordinated. Being disorganized will simply make studying much more difficult because there are so many things to do and think about. Don't merely jot down notes and post reminders in random locations.
Why do I lose track of what I learn?If a student stays up all night studying for the test, they usually forget the material during it. The ability of the brain to retain information increases with regular study schedules and thoughtful revision, and the material is ingrained much more deeply.
To know more about Study Habits visit:-
https://brainly.com/question/28393347
#SPJ1
This type of network may not be connected to other networks.
A) LAN
B) MAN
C) WAN
Answer:
LAN
Explanation:
brainliest?:(
Answer:
A) LAN (Local Area Network)
Which company gave Apple its big break in the business market?
Commodore Business Machines
Software Arts
Tandy Corporation
Microsoft
Answer:
Microsoft
Explanation: I’m not a computer fanatic, but everybody should know this. And if anything else is the answer, then that’s because it would’ve been in the text that I DON’T have.
Answer: software arts
Explanation:
i just did it
Question 2
An example of something that operates at the application layer is:
Answer:
HTTP, FTP, SMTP- These are protocols at the application layer
Explanation:
what is the main objective of the administrator when creating and assigning storage accounts to users?
Note that the main objective of the administrator when creating and assigning storage accounts to Users is "to provide them with a secure and reliable method of storing and accessing their data, while also maintaining control and visibility over the data and its usage. "
What is an Administrator in IT?IT administrators, also known as system administrators, configure and manage the computers, servers, networks, corporate software, and security systems of a business. They also assist the organization stay comply with cybersecurity rules by optimizing internal IT infrastructure for increased efficiency.
A competent administrator must understand networks and how to handle network problems. Basic hardware expertise is required. Understanding of backup, restoration, and recovery techniques. Excellent knowledge of permissions and user management
Learn more about Storage Accounts:
https://brainly.com/question/29929029
#SPJ1
Hey tell me more about your service. I have a school assignment 150 questions and answers on cyber security,how can I get it done?
Answer:
Explanation:
I have knowledge in a wide range of topics and I can help you with your school assignment by answering questions on cyber security.
However, I want to make sure that you understand that completing a 150 question assignment on cyber security can be time-consuming and it's also important that you understand the material well in order to do well on exams and to apply the knowledge in real-world situations.
It would be beneficial to you if you try to work on the assignment by yourself first, then use me as a resource to clarify any doubts or to check your answers. That way you'll have a deeper understanding of the material and the assignment will be more beneficial to you in the long run.
Please also note that it is important to always check with your teacher or professor to ensure that getting assistance from an AI model is in line with your school's academic policies.
Please let me know if there's anything specific you would like help with and I'll do my best to assist you.
write flow chart pseudocode and algorithm for a computation that perform balance,interest, withdrawal,in bank for Ethiopia?
Answer:
Flowchart:
Start
Input customer information (name, account number, etc.)
Calculate balance
Calculate interest
Prompt user to enter withdrawal amount
Calculate new balance
Print new balance
End
Pseudocode:
START
// Declare variables
DECLARE customerName
DECLARE customerAccountNumber
DECLARE customerBalance
DECLARE customerInterest
DECLARE withdrawalAmount
// Get customer information
INPUT customerName
INPUT customerAccountNumber
// Calculate balance
SET customerBalance = customerAccountNumber * customerInterest
// Calculate interest
SET customerInterest = customerBalance * 0.05
// Prompt user to enter withdrawal amount
INPUT withdrawalAmount
// Calculate new balance
SET customerBalance = customerBalance - withdrawalAmount
// Print new balance
PRINT customerBalance
END
Explanation:
What is the difference between a baseline and an objective?
A baseline is a start, and an objective is an ending.
A baseline is measurable, and an objective is not measurable.
A baseline is a start, and an objective shows progression.
A baseline is a benchmark, and an objective is an ending.
The difference between a baseline and an objective is a baseline is a start, and an objective is an ending. Therefore, option A is correct.
What is the objective of baseline?Regardless of the study topic, a baseline study is a descriptive cross-sectional survey that primarily offers quantitative data on the current condition of a specific situation in a given population. It seeks to quantify how various variables are distributed over time within a study population.
A baseline is a constant point of comparison that is employed in comparison studies. In business, a project's or product's success is frequently evaluated in comparison to a baseline figure for expenses, sales, or any other number of factors. A project may go over or under its predetermined benchmark.
Thus, option A is correct.
To learn more about the objective of baseline, follow the link;
https://brainly.com/question/15018074
#SPJ1
protocol layering can be found in many aspect of our lives such as air travelling .imagine you make a round trip to spend some time on vacation at a resort .you need to go through some processes at your city airport before flying .you also need to go through some processes when you arrive at resort airport .show the protocol layering for round trip using some layers such as baggage checking/claiming,boarding/unboard,takeoff/landing.
Answer:
Baggage checking/claiming:
Check in at the city airport and check your baggage
Claim your baggage at the resort airport
Boarding/unboarding:
Board the plane at the city airport
Unboard the plane at the resort airport
Takeoff/landing:
Takeoff from the city airport
Land at the resort airport
Takeoff from the resort airport
Land at the city airport
Directions :: Write a Ship class. Ship will have x, y, and speed properties. x, y, and speed are integer numbers. You must provide 3 constructors, an equals, and a toString for class Ship.
One constructor must be a default.
One constructor must be an x and y only constructor.
One constructor must be an x, y, and speed constructor.
Provide all accessor and mutator methods needed to complete the class.
Add a increaseSpeed method to make the Ship speed up according to a parameter passed in.
Provide an equals method to determine if 2 Ships are the same(i.e. in the same location).
You also must provide a toString() method.
The toString() should return the x, y, and speed of the Ship.
In order to test your newly created class, you must create another class called ShipRunner. There you will code in the main method and create at least 2 Ship objects (although you can create more if you like), using the constructors you created in the Ship class. Then you will print them out using the toString method and compare them with the equals method.
I'm trying to make an equals method I just don't know how to
Answer: Assuming this is in the java language.. the equals() would be
Explanation:
public boolean equals(Object o){
if(o == this){
return true;
}
if (!(o instanceof Ship)) {
return false;
}
Ship s = (Ship) o;
return s.x == this.x && s.y == this.y && s.speed == this.speed;
}
Next, you begin to clean your data. When you check out the column headings in your data frame you notice that the first column is named Company...Maker.if.known. (Note: The period after known is part of the variable name.) For the sake of clarity and consistency, you decide to rename this column Company (without a period at the end).
Assume the first part of your code chunk is:
flavors_df %>%
What code chunk do you add to change the column name?
Answer:
You can use the rename function to change the column name. Here is an example code chunk:
flavors_df %>%
rename(Company = Company...Maker.if.known.)
This will rename the Company...Maker.if.known. column to Company. Note that the old column name is surrounded by backticks () because it contains a period, which is a special character in R. The new column name, Company`, does not need to be surrounded by backticks because it does not contain any special characters.
Explanation:
How BFS takes more memory than DFS?
Answer:
The BFS have to track of all nodes on the same level
A(n) ____ is a central computer that enables authorized users to access networked resources.
A) peripheral
B) server
C) application
D) LAN
Answer:
Server
Explanation:
Server is a central computer that enables authorized users to access networked resources.
What did the police threaten to do?
Answer:
fire?
Explanation:
Will mark brainliest if correct!
Code to be written in python
A deferred annuity is an annuity which delays its payouts. This means that the payouts do not start until after a certain duration. Notice that a deferred annuity is just a deposit at the start, followed by an annuity. Your task is to define a Higher-order Function that returns a function that takes in a given interest rate and outputs the amount of money that is left in a deferred annuity.
Define a function new_balance(principal, gap, payout, duration) that returns a single-parameter function which takes in a monthly interest rate and outputs the balance in a deferred annuity. gap is the duration in months before the first payment, payout is monthly and duration is just the total number of payouts.
Hint: Note that duration specifies the number of payouts after the deferment, and not the total duration of the deferred annuity.
def new_balance(principal, gap, payout, duration):
# Complete the function
return
# e.g.
# test_balance = new_balance(1000, 2, 100, 2)
# result = test_balance(0.1)
Test Case:
new_balance(1000, 2, 100, 2)(0.1) 1121.0
Answer:
def new_balance(principal, gap, payout, duration):
def calculate_balance(interest_rate):
balance = principal
for i in range(gap):
balance *= (1 + interest_rate/12)
for i in range(duration):
balance *= (1 + interest_rate/12)
balance -= payout
return balance
return calculate_balance
Explanation:
Answer:
def new_balance(principal, gap, payout, duration):
# convert monetary amounts to cents
principal_cents = principal * 100
payout_cents = payout * 100
def balance(rate):
# calculate the interest earned during the deferment period in cents
interest_cents = principal_cents * (1 + rate) ** gap - principal_cents
# calculate the balance after the first payout in cents
balance_cents = interest_cents + principal_cents - payout_cents
# loop through the remaining payouts, calculating the balance after each one in cents
for i in range(duration - 1):
balance_cents = balance_cents * (1 + rate) - payout_cents
# convert the balance back to dollars and round it to the nearest cent
balance_dollars = round(balance_cents / 100)
return balance_dollars
return balance
test_balance = new_balance(1000, 2, 100, 2)
result = test_balance(0.1)
print(float(result))
Accenture is one of several hundred companies that has signed on to the United Nations Global Compact (UNGC) Business Ambition pledge.
Answer: True
Explanation:
Accenture is one of several hundred companies that has signed on to the United Nations Global Compact (UNGC) Business Ambition pledge. The UNGC is a voluntary initiative that encourages businesses to align their operations and strategies with ten universally accepted principles in the areas of human rights, labor, environment, and anti-corruption. The Business Ambition pledge is a component of the UNGC that invites businesses to set ambitious, science-based targets to reduce greenhouse gas emissions in line with the goals of the Paris Agreement. Accenture is one of many companies that have committed to this pledge and to taking action to combat climate change and support sustainable development.
Can you incorporate open-source code from a github forum into IP tool?
Answer:
No
Explanation:
Answer: No, Info does not allow the use of open-source components in proprietary software he contracts.
what is primary key? List any two advantage of it.
Which of the following devices can store large amounts of electricity, even when unplugged?
LCD monitor
DVD optical drive
CRT monitor
Hard disk drive
Even when unplugged, a CRT (Cathode Ray Tube) monitor can store a lot of electricity. The capacitors within CRT monitors can store enough power to be fatal, thus you should never open one.
What does CRT stand for?An electron beam striking a phosphorescent surface creates images in a cathode-ray tube (CRT), a specialized vacuum tube. CRTs are typically used for desktop computer displays. The "picture tube" in a television receiver is comparable to the CRT in a computer display.
What characteristics does CRT have?Flat screen, touch screen, anti-reflective coating, non-interlaced, industrial metal cabinet, and digital video input signal are typical features of CRT monitors. As opposed to the typically curved screen found in most CRT displays, the monitor's screen can be (almost) flat.
To learn more about CRT monitors visit:
brainly.com/question/29525173
#SPJ1
Answer:
CRT monitor
Explanation:
A cathode ray tube (CRT) monitor can store large amounts of electricity, even when unplugged. You should never open a CRT monitor, as the capacitors within the CRT can store enough electricity to be lethal.
LCD monitors do not use large capacitors and are much safer to work on than CRT monitors (although the CCFL backlight has mercury vapor in it, which could be harmful if the tube is broken).
DVD optical drives and hard disk drives do not store electricity in sufficient quantity to be harmful.
Describe what social engineering is and explain its existence and prevalence.
Explain why SE is an important part of an information technology security course.
Perform statistical research in the social engineering area providing the following: (1) Describe the current percentage of cyber attacks relying on social engineering and the percentage of attacks from both internal and externa sources; and (2) Describe how these percentages impact the current corporate social engineering incident response effort.
Discuss employee and management responsibilities with regard to information security and combating SE. Make sure your work clarifies your opinion as to who carries more responsibility for preventing SE-the employees or management. Provide examples to back up your statements.
Social engineering is a tactic used by attackers to manipulate individuals into divulging sensitive information or performing actions that may be harmful to the organization.
Social engineering attacks exploit human psychology, emotions, and trust to trick people into revealing sensitive information or performing actions that they otherwise wouldn't. The attacks can take many forms, such as phishing emails, phone scams, pretexting, and baiting.
What is social engineering?The prevalence of social engineering attacks has increased in recent years, as attackers have become more sophisticated and creative in their methods.
According to the Verizon Data Breach Investigations Report (DBIR) in 2020, social engineering is used in 84% of successful cyber attacks and the most common form of social engineering is phishing. It is also reported that around 30% of phishing messages are opened and 12% of recipients click on the malicious link.
When it comes to combating social engineering, both employees and management carry some level of responsibility. Employees are the first line of defense and play a vital role in protecting the organization's sensitive information. They should be educated and trained on how to identify and avoid social engineering attacks. Management, on the other hand, is
Learn more about social engineering from
https://brainly.com/question/29024098
#SPJ1
Grayson is creating a program to keep track of how much money he earns and spends each week.he earns and spends each week. He wants to know if he has enough for ice cream? What data should he use to store his answer
Since Grayson uses a program that allows him to keep track of how much money he earns and spends each week. The type of data that will be used to give him the answer to the question is option A: "Boolean".
What is the program about?A Boolean variable can hold only two values: true or false.
He can use a conditional statement to check if the amount of money he has left over after subtracting his expenses from his earnings is greater than or equal to the cost of the ice cream. If it is, he can set the Boolean variable to "True", indicating that he has enough money for ice cream. If it is not, he can set the Boolean variable to "False", indicating that he does not have enough money.
Therefore, Grayson can compare the value of his remaining money to the cost of the ice cream, if the remaining money is greater than or equal to $4, he can set the Boolean variable to "True" which means he has enough money.
Learn more about program from
https://brainly.com/question/24613235
#SPJ1
See full question below
Grayson uses a program that allows him to keep track of how much money he earns and spends each week. Which type of data will be used to give him the answer to the following question?
"Do I have $4 to buy ice cream?"
Boolean
Images
Numbers
Text
Create a program for the given problems using one-dimensional array. Program to identify the highest value in the given numbers.
Answer:
Explanation:
Here's one way you could write a C program to identify the highest value in a given set of numbers using a one-dimensional array:
Copy code
#include <stdio.h>
int main() {
int nums[10]; // Declare an array of 10 integers
int i, max;
printf("Enter 10 numbers: ");
for (i = 0; i < 10; i++) {
scanf("%d", &nums[i]); // Read in the numbers
}
max = nums[0]; // Initialize max to the first number in the array
for (i = 1; i < 10; i++) {
if (nums[i] > max) { // Compare each number to the current max
max = nums[i]; // If a number is larger, update the max
}
}
printf("The highest value is: %d", max);
return 0;
}