Answer:
Bond order is a counting method that gives an idea about numbers of electrons shared between atoms. A species with a higher bond order is more stable. A bond order equal to 2 is a double bond, and a bond order of 3 is a triple bond.
Explanation:
One liter of gas A at 1.0 atm pressure has a temperature of 25°C while the same volume and pressure of gas B has a temperature of 50°C. What else do you know about these two gases?
A) There are twice as many moles of gas B than gas A.
B) Gas A has twice the molar mass of gas B.
C) Gas A has more kinetic energy than gas B.
D) Gas B has more kinetic energy than gas A.
Answer:
b
Explanation:
1. If I have 5 moles of a gas at a pressure of 7.6 atm and a volume of 12 liters, what is the temperature?
Answer:
221.22K or -51°C
Explanation:
We will be using the Ideal Gas Law to calculate the temperature of the gas. It is a mathematical relationship that describes the behavior of ideal gas ample for any combo of varying pressure, volume, temperature, and # of moles (n). It is derived by combing Boyle's Law, Charles' Law, Gay-Lussac's & Avogadro's Law.
Note: As always, remember that temperature must be in Kelvin not Celsius when using this equation.
Ideal Gas Law: [tex]PV = nRT[/tex], where P = pressure, V = volume (in Liters), n = # of moles, R = the ideal gas constant, and T = temperature (in Kelvin).
Based on the problem, we are given the pressure, volume, and # of moles. We are asked to find the temperature. What about R you ask? Well, R is a constant that is the value of 1 mole of gas at STP. R has various values depending on the pressure units. In this case, our pressure is in atm so the R value = 0.0821.
Onto the math - all that needs to be done now is to plug and chug. Plug in the given values to find the temperature:
Set up: [tex](7.6 atm)(12L) = (5 mol)(0.0821 L*atm/(mol*K))(T)[/tex]
==> [tex]T = \frac{(7.6 atm)(12L)}{(5 mol)(0.0821 L*atm/(mol*K))}[/tex]
==> T = 221.17K
The answer is 221.17K. To convert into Celsius, subtract by 273.15 to get -50.99 or -51°C.
Calculate the volume of 0.10 M sucrose solution that must be diluted to prepare 10.00 ml of a 0.015 M sucrose solution
What happens if more solute is added to a saturated solution?
Answer:
A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.
Answer:
will not change
Explanation:
A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.
what do you mean by carrier
Answer:
1 : one that carries : bearer, messenger. 2a : an individual or organization engaged in transporting passengers or goods for hire. b : a transportation line carrying mail between post offices.
A 0.6467-g portion of manganese dioxide was added to an acidic solution in which 1.1701 g of a chloride-containing sample was dissolved. Evolution of chlorine took place as a consequence of the following reaction: After the reaction was complete, the excess was collected by filtration, washed, and weighed, and 0.3104 g was recovered. Express the results of this analysis in terms of percent aluminum chloride.
Answer:
29.39% of AlCl₃ in the sample
Explanation:
Based on the reaction:
MnO₂(s) + 2Cl⁻ + 4H⁺ → Mn²⁺ + Cl₂(g) + 2H₂O
We can find the amount of chloride in solution with the amount of MnO₂ that reacted as follows:
Initial mass MnO₂ = 0.6467g
Recovered mass = 0.3104g
Mass that reacted = 0.6467g - 0.3104g = 0.3363g
Moles MnO₂ -Molar mass: 86.9368g/mol-:
0.3363g * (1mol / 86.9368g) = 3.868x10⁻³ moles MnO₂
Moles Cl⁻:
3.868x10⁻³ moles MnO₂ * (2mol Cl⁻ / 1mol MnO₂) = 7.737x10⁻³ moles Cl⁻
Moles of AlCl₃ and mass -Molar mass AlCl₃: 133.34g/mol-:
7.737x10⁻³ moles Cl⁻ * (1mol AlCl₃ / 3mol Cl⁻) = 2.579x10⁻³ moles AlCl₃
2.579x10⁻³ moles AlCl₃ * (133.34g / mol) =
0.3439g of AlCl₃ are present in the sample.
The percent is:
0.3439g of AlCl₃ / 1.1701g * 100 =
29.39% of AlCl₃ in the samplePLEASE ASNWR ASAP
If I have a 50 liter container that holds 45 moles of gas at a pressure of 2.66 x 104 mmHg, what is the
temperature inside the container? ** convert pressure to atm**
Calculate the total amount of energy required to change 10.0 g of water from 35.0 degrees Celsius to 110. degrees Celsius.
Answer:
The total amount of energy required is 25,515.2 J.
Explanation:
Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
When a system absorbs (or gives up) a certain amount of heat, it can happen that:
experience a change in its temperature, which involves sensible heat, undergoes a phase change at constant temperature, or latent heat.To calculate the latent heat the formula is used:
Q = m. L
Where
Q: amount of heat m: mass L: latent heatTo calculate sensible heat the following formula is used:
Q = m. c. ΔT
where:
Q: amount of sensible heat m: body mass c: specific heat of the substance ΔT: temperature rangeIn this case, you have in the first place a heat to raise the temp of the water from 35.0 C to 100 C, where the specific heat value for water is 4.184 [tex]\frac{J}{g*C}[/tex]:
q1 = m*c*(Tfinal-Tinitial)
q1 = 10.0 g *(4.184 [tex]\frac{J}{g*C}[/tex])* (100 - 35.0 C) = 2719.6 J
Now you have the heat to vaporize the water, where the heat of vaporization is 2259.36 [tex]\frac{J}{g}[/tex]:
q2 = m*(heat of vaporization)
q2 = 10.0 g*(2259.36 [tex]\frac{J}{g}[/tex]) = 22593.6 J
Finally, you have the heat to raise temp of steam to 110 C, where the specific heat value for steam is 2.02 [tex]\frac{J}{g*C}[/tex] :
q3 = m*c*(Tfinal-Tinitial)
q3 = 10.0 g*(2.02 [tex]\frac{J}{g*C}[/tex])*(110-100 C) = 202 J
The total amount of energy can be calculated as:
Q= q1 + q2 + q3
Q= 2719.6 J + 22593.6 J + 202 J
Q=25,515.2 J
The total amount of energy required is 25,515.2 J.
Which salt preparation uses a burette and a pipette
potassium chloride from potassium hydroxide and hydrochloric acid
A truck accelerates at a rate of 14 m/s2 . The truck weighs 17000 kg. What is the amount of force
necessary for the truck to accelerate at this rate?
Answer:
238000 N
Explanation:
Use F=ma
Mass= 17000 kg
Accel.= 14 m/s²
oxidation and reduction occur simultaneusly
What is the best method of separating the mixture of sand and fine salt?
By using filtration, the sand and fine salt can be effectively separated based on their difference in particle size, providing a clean separation of the two components.
Filtration is a separation technique that takes advantage of the difference in particle size between sand and salt. It involves passing the mixture through a porous material, such as filter paper or a filter funnel, which allows the liquid (saltwater) and small salt particles to pass through while retaining the larger sand particles.
Here's how the filtration process can be carried out:
1. Set up a filter apparatus with a funnel and filter paper or a filter flask.
2. Place the mixture of sand and salt in a beaker or a flask.
3. Slowly pour the mixture into the filter paper or funnel, allowing the liquid (saltwater) to pass through while retaining the sand on the filter paper.
4. Once the liquid has passed through completely, the sand will be left behind on the filter paper or in the filter flask.
5. Carefully remove the sand from the filter paper or filter flask, and the saltwater solution can be collected separately.
For more such questions on filtration
https://brainly.com/question/29756050
#SPJ8
A buffered solution _______. Select the correct answer below: fails to keep hydronium and hydroxide ion concentrations nearly constant when strong acids or bases are added. maintains a constant or nearly constant pH when small amounts of strong acids or bases are added. acts to keep the hydroxide ion concentration nearly constant. acts to keep the hydronium ion concentration nearly constant.
The correct option for the given question about Buffer Solution is Option B) which is maintains a constant or nearly constant pH when small amounts of strong acids or bases are added.
What is a Buffer Solution?When a little quantity of acid or base is diluted or added, the buffer solution undergoes very slight variations in its hydrogen ion concentration (pH). pH may be maintained in buffer solutions, which are mixtures of a weak acid and its conjugate base or a weak base and its conjugate acid.Acidic and alkaline buffers are the two main groups into which buffer solutions are commonly categorized.A weak acid and its salt are combined with a strong base to create an acidic buffer, which has an acidic pH.A weak base, its salt, and a strong acid are combined to create an alkaline buffer, which has a basic pH.
Thus we conclude that when weak acids or bases are supplied in small amounts, the pH remains steady or almost constant.
Learn more about Buffer Solution here:
https://brainly.com/question/26416276
#SPJ2
4. What is the molarity of a solution that contains 65g of sodium nitrate in 750? ml of solution?
Answer:
1.02 M
Explanation:
Solution contains 65g of sodium nitrate
Volume of solution = 750 ml
Now, Molar mass of sodium nitrate from online values = 84.9947 g/mol
Thus, it means 84.9947 g/mol of sodium nitrate dissolved in 1000 mL of water will be equal to 1 M molarity.
Thus;
Molarity of solution = (65/750) × (1000) × (1/84.9947) = 1.02 M
If objects with a greater mass have greater gravitational pull, why is our solar
system, Sun, planets and asteroids, NOT pulled into Alpha Centauri A?
Answer:
It's too far away
Explanation:
According to classical mechanics, gravitational pull is inversely proportional to the distance squared; as the distance increases, the gravitational pull decreases at a faster and faster rate. Since Alpha Centauri A is a few lightyears (Tens of trillions of kilometers away), without even needing to calculate the force of gravity, it is very miniscule.
What is the value for AG at 5000 K if AH = -220 kJ/mol and S= -0.05 kJ/(mol-K)?
A. -195 kJ
B. -470. kJ
C. 30 kJ
D. 470 kJ
Answer:
C. 30 kJ
Explanation:
Hello there!
In this case, in agreement to the thermodynamic definition of the Gibbs free energy, in terms of enthalpy of entropy:
[tex]\Delta G= \Delta H-T\Delta S[/tex]
It is possible to calculate the required G by plugging in the given entropy and enthalpy as shown below:
[tex]\Delta G=-220kJ/mol-5000K*-0.05kJ/mol*K\\\\\Delta G=30kJ/mol[/tex]
Therefore, the answer is C. 30 kJ .
Best regards!
Choose the options below that are true.
A. The rate law for a given reaction can be determined from a knowledge of the rate-determining step in that reaction's mechanism.
B. The rate laws of all chemical reactions can be determined directly from their net chemical equations.
C. The rate laws of bimolecular elementary reactions are second order overall.
D. The rate law for a given reaction can be determined from its reaction mechanism, without the accompanying rates of each elementary step in the mechanism.
Answer:
The options (A) -The rate law for a given reaction can be determined from a knowledge of the rate-determining step in that reaction's mechanism. and (C) -The rate laws of bimolecular elementary reactions are second order overall ,is true.
Explanation:
(A) -The rate law can only be calculated from the reaction's slowest or rate-determining phase, according to the first sentence.
(B) -The second statement is not entirely right, since we cannot evaluate an accurate rate law by simply looking at the net equation. It must be decided by experimentation.
(C) -Since there are two reactants, the third statement is correct: most bimolecular reactions are second order overall.
(D)-The fourth argument is incorrect. We must track the rates of and elementary phase that is following the reaction in order to determine the rate.
Therefore , the first and third statement is true.
1.Are forests a renewable or non-renewable resource? Give reasons for both possibilities
Answer:
Forests are renewable
Explanation:
Forests can grow again, but it takes forever to grow a new one so it shouldn't be taken for granted! You can remake a whole new forest, but it will take around 50 years and a lot of animals will die without them before that time comes!
But then again, it could be a non-renewable resources; because it takes so long to grow a new one!
Hope this helps!
The energy of flowing electrons
A. A. LightLightB. B. ChemicalChemicalC. C. ElectricalElectricalD. D. TransformationTransformationE. E. MechanicalMechanical
Answer:
C. ElectricalElectrical
Explanation:
( it might be wrong pls dont report me just let me kno y its wrong )
what is the major organic product obtained from the reaction of 1-butanol with aqueous hbr at reflux
Answer:
1-bromobutane
Explanation:
The reaction of butane with aqueous HBr at reflux is an SN2 reaction. The reaction passes through a single transition state in which the bond between carbon and the leaving group as well as the bond between carbon and the incoming nucleophile are being broken and formed simultaneously. It is a synchronous reaction.
The nuclephile attacks from the backside while the leaving group departs. This leads to inversion of configuration of the product.
if a gas sample has a pressure of 30.7 kPa at 273 K, what does the temperature have to decrease to lower the pressure to 28.4 kPa?
253K
268K
262K
When a balloon is blown up then let go air molecules rush out of the balloon and join the air molecules in earths atmosphere what happens to the enthalpy in the balloon?
Answer: It decreases
Answer: It decreases.
Explanation: a p e x :)
For the reaction 2 Cr(s) + 3 Pb²⁺(aq) ⟶ 3 Pb(s) + 2 Cr³⁺(aq), what is the value of n in the Nernst equation?
Answer:
The value of n is 6
Explanation:
The half-reactions of the problem are:
Cr(s) → Cr³⁺ + 3e⁻
Pb²⁺ + 2e⁻→ Pb(s)
To balance the electrons we must multiply the half-reactions as follows:
2 * (Cr(s) → Cr³⁺ + 3e⁻)
3 * (Pb²⁺ + 2e⁻→ Pb(s))
2Cr(s) → 2Cr³⁺ + 6e⁻
3Pb²⁺ + 6e⁻→ 3Pb(s)
In Nernst equation, the value of n are the electrons used to balance the reaction, as in this problem, the electrons are 6:
The value of n is 6These properties best describe which body (Gases Surface, 75%H, 25% He, Zones)
(18 Points)
Planet
or
Sun
NO LINKS
Answer:sun
Explanation:The Sun is the star at the center of the Solar System. It is a nearly perfect sphere of hot plasma, heated to incandescence by ... When hydrogen fusion in its core has diminished to the point at which the Sun is no longer in . Sunlight on the surface of Earth is attenuated by Earth's atmosphere, so that less power arrives
Reaction of Nitrile with Grignard Grignard reagents react with nitriles to give an intermediate imine anion that is hydrolyzed by the addition of water to yield a ketone. The mechanism is similar to the reduction of a nitrile to an amine except that only one nucleophilic addition occurs instead of two, and the nucleophile is a carbanion rather than a hydride ion.
Required:
Draw curved arrows to show the movement of electrons. in this step of the mechanism. Arrow-pushing Instructions
Answer:
its a.
Explanation:
Which metals will switch in this single replacement reaction Zn + MgO -->
a. Mg and Zn
b. Zn and O
c. Mg and O
d. This is not a single replacement reaction
Answer:
D
Explanation:
Magnesium is more reactive than zinc so no reaction will take place
What type of chemical reaction is this?
2Na + 2H20 - 2NaOH + H2
In a sample of neon, carbon, and oxygen gas, the total pressure is 9 atm.
The partial pressure of neon is 2 atm and the partial pressure of oxygen is 2
atm. What is the partial pressure of carbon?
9 atm
3 atm
5 atm
4 atm
Answer:
5 atm
Explanation:
add boh partial pressures and subtract from total pressure
What will be the pH of a buffer solution containing an acid of pKa7.5, with an acid concentration exactly one fourth of that of the conjugate base
Answer: pH of buffer solution is 8.1
Explanation:
The formula for the Henderson–Hasselbalch equation is:
[tex]pH=pK_a+\log\frac{[A^-]}{[HA]}[/tex]
[tex]pH[/tex] is the concentration of [tex][H^+][/tex]
[tex]pK_a[/tex] is the acid dissociation constant,
[tex]A^-[/tex] and [tex]HA[/tex] are concentrations of the conjugate base and starting acid.
Putting in the values we get:
[tex]pH=7.5+\log\frac{x}{\frac{x}{4}}[/tex]
[tex]pH=8.1[/tex]
Thus pH of buffer solution is 8.1
Lab: Measuring pH Table or
Lab Report please ( just link it ) please
Answer:
sorry my phone died lol but here are the answers
<3