The percent yield of water in the reaction is 37%. 37% of the maximum possible yield of water was obtained based on the given amounts of ethane and oxygen gas.
To calculate the percent yield of water, we need to compare the actual yield of water (given as 0.179 g) with the theoretical yield of water, which can be calculated based on the stoichiometry of the reaction.
The balanced equation for the reaction is:
C2H6(g) + O2(g) -> CO2(g) + H2O(g)
From the equation, we can see that the molar ratio between ethane and water is 1:3. This means that for every 1 mole of ethane, 3 moles of water are produced.
Mass of ethane (C2H6) = 0.90 g
Mass of oxygen gas (O2) = 1.0 g
Mass of water (H2O) = 0.179 g
First, we need to calculate the moles of ethane and oxygen gas used in the reaction:
Moles of ethane = Mass of ethane / molar mass of ethane
Moles of oxygen gas = Mass of oxygen gas / molar mass of oxygen gas
Next, we calculate the limiting reagent, which is the reactant that is completely consumed and determines the maximum amount of product that can be formed. The limiting reagent is the one that produces the smaller amount of product based on the stoichiometry of the reaction.
To determine the limiting reagent, we compare the moles of each reactant to the stoichiometric ratio in the balanced equation. The reactant that produces fewer moles of water is the limiting reagent.
Once we know the limiting reagent, we can calculate the theoretical yield of water based on the stoichiometric ratio.
Finally, we can calculate the percent yield using the formula:
Percent yield = (Actual yield / Theoretical yield) * 100
The percent yield of water in the reaction is 37%. This means that 37% of the maximum possible yield of water was obtained based on the given amounts of ethane and oxygen gas.
To know more about yield , visit:
https://brainly.com/question/25996347
#SPJ11
What is the concentration, in grams of solute per mL solvent) at 20.5 °C? mass solute Mass of solute = 0.078 g Mass of solvent = 0.100 g volume solvent Remember: 1 g H₂O = 1 mL H₂O A. 0.780 g/mL C. 0.078 g/mL B. 0.022 g/mL D. 0.0078 g/mL 2012
The concentration, in grams of solute per mL solvent) at 20.5 °C is 0.780 g/mL, hence option A is correct.
Divide the solute's mass by the solvent's volume to get the concentration in grammes of solute per millilitre of solvent.
Mass of solute = 0.078 g
Mass of solvent = 0.100 g
Volume of solvent = 0.100 g (since 1 g H₂O = 1 mL H₂O)
Concentration = Mass of solute / Volume of solvent
Concentration = 0.078 g / 0.100 mL
Divide the supplied mass of the solute by the volume of the solvent to obtain the concentration in grams of solute per mL of solvent. Let's figure it out:
Concentration = 0.078 g / 0.100 mL = 0.78 g/mL
Thus, the concentration is 0.78 g/mL.
Learn more about concentration, here:
https://brainly.com/question/32002369
#SPJ1
Identify the reactions of the citric acid cycle that provide reducing power for the electron-transport chain. conversion of isocitrate to a-ketoglutarate conversion of fumarate to malate conversion of a-ketoglutarate to succinyl-CoA conversion of succinyl-CoA to succinate
The reactions in the citric acid cycle that provide reducing power for the electron-transport chain are the conversion of isocitrate to α-ketoglutarate and the conversion of α-ketoglutarate to succinyl-CoA.
During the conversion of isocitrate to α-ketoglutarate, an enzyme called isocitrate dehydrogenase catalyzes the oxidation of isocitrate, resulting in the production of NADH and the release of carbon dioxide.
Similarly, during the conversion of α-ketoglutarate to succinyl-CoA, another enzyme called α-ketoglutarate dehydrogenase catalyzes the oxidation of α-ketoglutarate. This reaction produces another molecule of NADH and releases carbon dioxide.
Both of these reactions involve the transfer of electrons from the substrates (isocitrate and α-ketoglutarate) to NAD+, forming NADH. The generated NADH molecules serve as a source of reducing power that can be utilized by the electron-transport chain to produce ATP through oxidative phosphorylation.
To know more about citric acid cycle, refer here:
https://brainly.com/question/30421074#
#SPJ11
a laser pointer used in a lecture hall emits light at 405 nm. part a what is the frequency of this radiation? Express your answer in inverse seconds to two significant figures.
The frequency of the radiation emitted by the laser pointer is approximately [tex]7.41 \times 10^{14} Hz[/tex].
The frequency (f) of radiation can be calculated using the speed of light (c) and the wavelength (λ) using the equation:
f = c / λ
The speed of light, c, is approximately 3.00 × 10⁸ meters per second (m/s).
Given the wavelength, λ, of 405 nm (405 × 10⁻⁹ meters), we can substitute these values into the equation to find the frequency:
f = (3.00 × 10⁸ m/s) / (405×10⁻⁹ m)
[tex]f \approx 7.41 \times 10^{14} Hz[/tex]
Learn more about wavelength here:
https://brainly.com/question/30532991
#SPJ4
2.0 L container. What change will occur
for the system when the container is
expanded to 5.0 L?
2NO(g) + O2(g) ⇒ 2NO2(g) + 113.06 kJ
Hint: How many moles of gas are on each side?
The reactions shifts to the left reactants to produce more moles of gas
There is no change because there are the same number of moles of gas on both sides
The reactions shifts to the right products to produce fewer moles of gas
The correct statement is, "The reaction shifts to the right (products) to produce fewer moles of gas."
The change that will occur for the system when the container is expanded from 2.0 L to 5.0 L depends on the number of moles of gas on each side of the reaction.
Looking at the balanced equation:
2NO(g) + O₂(g) -> 2 NO₂(g) + 113.06 kJ
On the reactant side, we have 2 moles of NO and 1 mole of O₂, which gives a total of 3 moles of gas.
On the product side, we have 2 moles of NO₂, which also gives a total of 2 moles of gas.
Comparing the number of moles of gas on each side, we see that there are fewer moles of gas on the product side. Therefore, when the container is expanded from 2.0 L to 5.0 L, the reaction will shift to the right to produce fewer moles of gas.
Hence, the correct statement is:
"The reaction shifts to the right (products) to produce fewer moles of gas."
Learn more about Number of moles from the link given below.
https://brainly.com/question/20370047
#SPJ4
the heat capacity of solid iron is 0.447 j/g˚c. if 70,548 j of energy were transferred to a 384.67 g chunk of iron at 25.82 ˚c, what would be the final temperature?
The final temperature of the iron chunk would be approximately 69.07 ˚C.
To determine the final temperature of the iron chunk, we can use the equation:
q = m * C * ΔT
where:
q = energy transferred (in joules)
m = mass of the iron chunk (in grams)
C = heat capacity of solid iron (in J/g˚C)
ΔT = change in temperature (in ˚C)
We can rearrange the equation to solve for ΔT:
ΔT = q / (m * C)
Substituting the given values:
q = 70,548 J
m = 384.67 g
C = 0.447 J/g˚C
ΔT = 70,548 J / (384.67 g * 0.447 J/g˚C)
ΔT ≈ 43.25 ˚C
To find the final temperature, we add ΔT to the initial temperature:
Final temperature = Initial temperature + ΔT
Final temperature = 25.82 ˚C + 43.25 ˚C
Final temperature ≈ 69.07 ˚C
Therefore, the final temperature of the iron chunk would be approximately 69.07 ˚C.
Learn more about final temperature here:
https://brainly.com/question/2264209
#SPJ11
A sample of an ideal gas has a volume of 3.30 L at 10.20 degrees C and 1.60 atm. What is the volume of the gas at 20.40 degrees C and 0.997 atm?
At a temperature of 20.40 degrees C and a pressure of 0.997 atm, the volume of the gas is approximately 4.57 L.
To find the volume of the gas at the new conditions, we can use the combined gas law, which relates the initial and final states of a gas:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
Where:
P1 = initial pressure
V1 = initial volume
T1 = initial temperature
P2 = final pressure
V2 = final volume (what we're trying to find)
T2 = final temperature
Given:
P1 = 1.60 atm
V1 = 3.30 L
T1 = 10.20 + 273.15 = 283.35 K (converting Celsius to Kelvin)
P2 = 0.997 atm
T2 = 20.40 + 273.15 = 293.55 K
Plugging in these values into the equation, we can solve for V2:
(1.60 atm * 3.30 L) / (283.35 K) = (0.997 atm * V2) / (293.55 K)
Simplifying the equation:
(1.60 * 3.30) / (283.35) = (0.997 / 293.55) * V2
V2 = [(1.60 * 3.30) / (283.35)] * [(293.55) / 0.997]
V2 ≈ 4.57 L
At a temperature of 20.40 degrees C and a pressure of 0.997 atm, the volume of the gas is approximately 4.57 L. The combined gas law equation allows us to calculate the final volume by relating the initial and final states of the gas. By plugging in the given values and solving for V2, we determine the volume at the new conditions.
To know more about gas laws visit:
brainly.com/question/17071800
#SPJ11
n the titration of 50.0 mL of 0.250 M CH_3COOH with 0.250 M KOH, which of the following species are present in significant amounts in the resultant solution after addition of 40 mL of KOH? I. CH_3COOH (aq) I
I. CH_3COO^- (aq) III. OH^- (aq) A. only B. II only C. III only D. I and II only E. I and III only
The balanced chemical equation for the reaction between CH3COOH (acetic acid) and KOH (potassium hydroxide) is given below.
CH3COOH + KOH → CH3COOK + H2OIn this reaction, potassium acetate and water are formed. So, the significant species present in the resultant solution after the addition of KOH can be obtained as follows:Initial number of moles of CH3COOH in 50.0 mL = 0.250 M × 50.0 mL / 1000 mL = 0.0125 molAfter the addition of 40.0 mL of 0.250 M KOH, number of moles of KOH added = 0.250 M × 40.0 mL / 1000 mL = 0.010 molThe reaction between CH3COOH and KOH is a neutralization reaction, where equal numbers of moles of acid and base react with each other. So, the limiting reactant here is KOH, as it has fewer moles than CH3COOH. Therefore, the number of moles of CH3COOH remaining after the reaction = 0.0125 mol – 0.010 mol = 0.0025 molNow, the number of moles of CH3COO- (acetate ions) formed = 0.010 molThe volume of the resultant solution = volume of CH3COOH + volume of KOH = 50.0 mL + 40.0 mL = 90.0 mLSo, the concentration of CH3COO- in the resultant solution = number of moles of CH3COO- / volume of solution = 0.010 mol / 0.090 L = 0.111 MThe concentration of CH3COOH in the resultant solution = number of moles of CH3COOH / volume of solution = 0.0025 mol / 0.090 L = 0.0278 MThe concentration of OH- in the resultant solution is calculated using the concentration of KOH that has reacted.COH- = CKOH × VKOH / Vtotal = 0.250 M × 0.040 L / 0.090 L = 0.111 MTherefore, the significant species present in the resultant solution are I and II only. That is, CH3COOH and CH3COO-. So, the correct option is D.
To know more about solution visit:
https://brainly.com/question/29848621
#SPJ11
How many grams of carbon dioxide are produced If 3. 85 mol of propane reacts with 20. 0 mol of oxygen according to the following balanced equation, C3H8 + 5O2 3CO2 + 4H2O
Out of propane and oxygen, oxygen is the limiting reagent.19.25 moles of oxygen reacts with 3 moles of carbon dioxide.So, 5 moles of oxygen reacts with 3/19.25 × 5 = 0.77 moles of carbon dioxide. Hence, 33.88 grams of carbon dioxide are produced.
Given that the balanced chemical equation is:C3H8 + 5O2 3CO2 + 4H2O3.85 mol of propane reacts with 20.0 mol of oxygen.
According to the balanced chemical equation, 1 mole of propane reacts with 5 moles of oxygen. Hence, 3.85 moles of propane reacts with 5 × 3.85 = 19.25 moles of oxygen.
Therefore, oxygen is the limiting reagent.19.25 moles of oxygen reacts with 3 moles of carbon dioxide.
So, 5 moles of oxygen reacts with 3/19.25 × 5 = 0.77 moles of carbon dioxide.
The molar mass of carbon dioxide is 44 g/mol.So, the mass of 0.77 moles of carbon dioxide is:44 × 0.77 = 33.88 g of CO2.
Hence, 33.88 grams of carbon dioxide are produced.
:Therefore, 33.88 grams of carbon dioxide are produced.
From the given balanced chemical equation, it is inferred that 3.85 moles of propane reacts with 20.0 mol of oxygen. Out of propane and oxygen, oxygen is the limiting reagent.19.25 moles of oxygen reacts with 3 moles of carbon dioxide.So, 5 moles of oxygen reacts with 3/19.25 × 5 = 0.77 moles of carbon dioxide. Hence, 33.88 grams of carbon dioxide are produced.
To know more about propane visit:
brainly.com/question/14519324
#SPJ11
What mass of KNO3 would have to be decomposed to produce 21.1 L of oxygen measured at STP?
2KNO3(s) −→ 2KNO2(s) + O2(g)
1. 202 g
2. 95.2 g
3. 190 g 4. 130 g
The mass of KNO3 required to produce 21.1 L of oxygen measured at STP is 95.2 g.
In the given balanced chemical equation, 2 moles of KNO3 produce 1 mole of O2. The molar volume of any gas at STP is 22.4 L/mol. To determine the mass of KNO3 needed, we first calculate the number of moles of O2 in 21.1 L using the ideal gas law: n = V/22.4. Thus, n = 21.1/22.4 = 0.941 moles of O2. Since the ratio in the balanced equation is 2:1 for KNO3 to O2, we need twice the number of moles of KNO3. Therefore, 0.941 moles of O2 would require 2 * 0.941 moles of KNO3, which is 1.882 moles. Finally, we determine the mass of KNO3 using its molar mass. The molar mass of KNO3 is approximately 101.1 g/mol. Thus, the mass of KNO3 needed is 1.882 moles * 101.1 g/mol = 190 g. Therefore, the correct answer is option 3: 190 g.
Learn more about KNO3 here ; brainly.com/question/14372543
#SPJ11
Asappp In which of the following reactions is chlorine (ci) oxidized?
A. Br2 + 2ci" = ci2 +2Br"
B. Ci2 + 2e" = 2ci"
C. 2cio3" + 12h+ = ci2 + 6h2o
D. 2na + ci2 = 2naCi
In the given reactions, the species chlorine (Cl) can undergo oxidation when its oxidation state increases. Let's analyze each reaction:
A. Br2 + 2Cl- = Cl2 + 2Br-
In this reaction, chlorine starts with an oxidation state of -1 and ends with an oxidation state of 0. It gains electrons and gets reduced rather than being oxidized.
B. Cl2 + 2e- = 2Cl-
In this reaction, chlorine starts with an oxidation state of 0 and ends with an oxidation state of -1. Chlorine gains electrons and gets reduced rather than being oxidized.
C. 2ClO3- + 12H+ = Cl2 + 6H2O
In this reaction, chlorine starts with an oxidation state of +5 in ClO3- and ends with an oxidation state of 0 in Cl2. Chlorine goes from a higher oxidation state to a lower oxidation state, indicating oxidation has occurred.
D. 2Na + Cl2 = 2NaCl
In this reaction, chlorine starts with an oxidation state of 0 in Cl2 and ends with an oxidation state of -1 in NaCl. Chlorine gains electrons and gets reduced rather than being oxidized.
Therefore, the correct answer is option C. In reaction C, chlorine is oxidized from an oxidation state of +5 to 0.
Learn more about oxidation here : brainly.com/question/29100691
#SPJ11
Zirconium (Zr) has an average atomic mass of 91. 22 amu and is made up of the isotopes 90Zr, 91Zr, 92Zr, 94Zr, and 96Zr. The atom of which isotope has the greatest mass?
Zirconium (Zr) has an average atomic mass of 91.22 amu and is made up of the isotopes 90Zr, 91Zr, 92Zr, 94Zr, and 96Zr. The atom of which isotope has the greatest mass?To determine the isotope with the largest mass, we must first understand what isotopes are. Isotopes are atoms that have the same atomic number but a different number of neutrons, resulting in a different atomic mass.
As a result, we can determine the mass of a specific isotope by determining the number of neutrons it contains. This is done by subtracting the atomic number from the atomic mass.For example, in the case of 90Zr, the atomic number of zirconium is 40, and the atomic mass of this isotope is 90. As a result, the number of neutrons in this isotope is equal to 90 - 40 = 50. We can repeat this process for the other zirconium isotopes, as follows:
- For 91Zr, neutrons = 91 - 40 = 51
- For 92Zr, neutrons = 92 - 40 = 52
- For 94Zr, neutrons = 94 - 40 = 54
- For 96Zr, neutrons = 96 - 40 = 56
As a result, we can see that the isotope with the largest mass is 96Zr, with a mass of 96 atomic mass units.
Therefore, we can conclude that the atom of the isotope 96Zr has the greatest mass among all the isotopes of zirconium.
For such more question on atomic mass
https://brainly.com/question/30390726
#SPJ8
Zirconium (Zr) has an average atomic mass of 91. 22 amu and is made up of the isotopes 90Zr, 91Zr, 92Zr, 94Zr, and 96Zr. The atom of which isotope has the greatest mass is 96Zr.
What are isotopes?Isotopes are atoms of a single element with differing numbers of neutrons in their nuclei. In addition, isotopes have the same atomic number and, as a result, the same number of electrons, but different atomic masses or mass numbers due to their differing numbers of neutrons.Isotope abundances are different in different materials and can also be modified over time by radioactive decay or other processes.The mass of an atom is primarily determined by the number of neutrons and protons in its nucleus. Because the number of electrons in the atom's outermost shell determines its chemical behavior, the number of neutrons in an atom's nucleus has little impact on its chemical behavior.
Zirconium (Zr) has an average atomic mass of 91.22 amu and is made up of the isotopes 90Zr, 91Zr, 92Zr, 94Zr, and 96Zr. To determine which of these isotopes has the greatest mass, look at the atomic number of each isotope:90Zr has a mass of 89.904 amu91Zr has a mass of 90.904 amu92Zr has a mass of 91.905 amu94Zr has a mass of 93.906 amu96Zr has a mass of 95.908 amuThe atom with the highest mass is 96Zr, which has a mass of 95.908 amu. Therefore, the atom of which isotope has the greatest mass is 96Zr.
To know more about Zirconium visit:-
https://brainly.com/question/28488357
#SPJ11
calculate the kinetic energy of an electron ejected from a piece of sodium (φ = 4.41x10–19 j) that is illuminated with 295 nm light
The kinetic energy of the electron ejected from sodium when illuminated with 295 nm light is approximately 2.277 × 10⁻¹⁹ J.
To calculate the kinetic energy of an electron ejected from a piece of sodium when illuminated with 295 nm light, we need to use the relationship between the energy of a photon and the work function (φ) of the material.
The energy of a photon (E) is given by the equation:
E = hc/λ
Where:
h is the Planck's constant (6.62607015 × 10⁻³⁴ J·s)
c is the speed of light in a vacuum (2.998 × 10⁸ m/s)
λ is the wavelength of light (295 nm = 295 × 10⁻⁹ m)
Let's calculate the energy of the photon first:
E = (6.62607015 × 10⁻³⁴J·s × 2.998 × 10⁸ m/s) / (295 × 10⁻⁹ m)
E ≈ 6.687 × 10⁻¹⁹ J
Now, to find the kinetic energy of the ejected electron, we subtract the work function from the energy of the photon:
Kinetic energy = E - φ
Kinetic energy = (6.687 × 10⁻¹⁹ J) - (4.41 × 10⁻¹⁹ J)
Kinetic energy ≈ 2.277 × 10⁻¹⁹J
Therefore, the kinetic energy of the electron ejected from sodium when illuminated with 295 nm light is approximately 2.277 × 10⁻¹⁹ J.
To know more about electron
https://brainly.com/question/371590
#SPJ11
you turn on the shower and check the water temperature with your hand. your brain is able to monitor increasing temperature because the thermosensitive neurons in your skin
the presence of heat-sensitive neurons in your skin allows your brain to monitor and sense changes in temperature when you check the temperature of the water with your hand.
What is Temperature?
Temperature is a measure of the average kinetic energy of a system. As particles in matter move faster, their kinetic energy begins to increase, which in turn increases the temperature of the system. Heat refers to the energy exchanged between two bodies of different temperatures when they come into contact.
That is right! When you turn on the shower and check the temperature of the water with your hand, your brain is able to track the rising temperature thanks to the presence of thermosensitive neurons in your skin.
Thermosensitive neurons are specialized sensory receptors that respond to changes in temperature. These neurons are located in the skin and are responsible for detecting and transmitting temperature information to the brain.
When warm water comes into contact with your skin, thermosensitive neurons in your hand detect the change in temperature. These neurons generate electrical signals in response to a thermal stimulus, which are then transmitted by nerve fibers to the brain.
The brain receives and processes these signals, allowing you to perceive and interpret the sensation of increasing temperature. This sensory information helps you determine whether the water is too hot, too cold, or a comfortable temperature, allowing you to adjust your shower accordingly.
In short, the presence of heat-sensitive neurons in your skin allows your brain to monitor and sense changes in temperature when you check the temperature of the water with your hand.
To learn more about Temperature from the given link
https://brainly.com/question/2568679
#SPJ4
An engineer wants to protect a zinc pipe using cathodic protection. Which metal is the most suitable sacrificial anode? O iron O tin O silver O aluminum O nickel
Cathodic protection is used to prevent metal corrosion in water pipelines and metal structures. This is done by adding a sacrificial anode that corrodes in place of the protected metal. This is a method of galvanic corrosion control. When the anode corrodes, it releases electrons into the electrolyte, which stops the metal from corroding.
The anode material must have a lower potential than the metal to be protected, which is why it is referred to as a sacrificial anode. Out of the metals, iron, tin, silver, aluminum, and nickel, aluminum is the most suitable for cathodic protection of zinc pipes. It is frequently used as a sacrificial anode in water heaters and storage tanks made of steel.The most appropriate metal for cathodic protection of a zinc pipe is aluminum. This is because aluminum is less electronegative than zinc, and it will serve as a sacrificial anode. Zinc corrodes in preference to aluminum, and it's a more expensive metal. When aluminum corrodes, it releases electrons into the water, which reduces the cathodic reaction rate. The electrons reduce the cathodic polarization of the protected metal and create a passive layer on the anode's surface, which decreases the rate of corrosion. Zinc is not recommended for cathodic protection since it is more electronegative than zinc, and it will act as a cathode.
To know more about zinc pipe visit:
https://brainly.com/question/31968962
#SPJ11
what is the molarity of 2500 ml of a solution that contains 160 grams of ammonium nitrate (nh4no3)?
To determine the molarity of a solution containing 160 grams of ammonium nitrate (NH4NO3) in 2500 ml of solution, we need to convert grams to moles and liters to calculate the molarity. Ammonium nitrate has a molar mass of 80.04 g/mol, so we divide 160 grams by 80.04 g/mol to obtain the number of moles. Next, we convert 2500 ml to liters by dividing by 1000. Finally, we divide the number of moles by the volume in liters to find the molarity of the solution.
The molarity (M) of a solution is calculated by dividing the number of moles of solute by the volume of the solution in liters. In this case, we have 160 grams of ammonium nitrate (NH4NO3). To convert grams to moles, we need to divide the given mass by the molar mass of NH4NO3, which is 80.04 g/mol.
160 grams / 80.04 g/mol = 1.999 moles of NH4NO3
Next, we need to convert the given volume of the solution, which is 2500 ml, into liters by dividing by 1000:
2500 ml / 1000 = 2.5 liters
Now, we can calculate the molarity by dividing the moles of NH4NO3 by the volume in liters:
Molarity = 1.999 moles / 2.5 liters = 0.7996 M
Therefore, the molarity of the solution containing 160 grams of ammonium nitrate in 2500 ml of solution is approximately 0.7996 M.
To learn more about molarity, refer:
brainly.com/question/30409494
#SPJ11
Identify the compound with the smallest percent ionic character
A. HF
B. IBr
C. HCl
D. LiF
Among the given compounds, the compound with the smallest percent ionic character is HF.
Ionic character is the measure of the degree of covalent character in the given compound. Ionic character refers to the strength of attraction between the opposite charged ions in the molecule. As the electronegativity difference between the atoms increase, the percentage of ionic character in the bond also increases. Among the given compounds, hydrogen fluoride (HF) has the smallest percent ionic character. The electronegativity difference between hydrogen and fluorine is the lowest among all other pairs of elements given. Hence the HF bond has the smallest percentage of ionic character in the given compounds. Therefore, the correct option is A. HF.
Learn more about ionic character here:
https://brainly.com/question/32498424
#SPJ11
A serving of ceral contain 13g of protein per box how many boxes need for 1.25tons?
The number of boxes to be able to get to 13 g of protein would be found to be 96, 154 boxes .
How to find the number of boxes ?The number of grams in a ton is 1, 000, 000 grams. This means that the amount of protein needed is:
= 1. 25 x 1, 000, 000
= 1, 250, 000 grams
If you need to find the number of boxes which would be able to give you 1. 25 tons of proteins, the formula is:
= Amount of protein required / Protein per box
Solving gives:
= Amount of protein required / Protein per box
= 1, 250, 000 / 13
= 96, 154 boxes
Find out more on protein at https://brainly.com/question/28798122
#SPJ4
Draw the Lewis structure of the phosphite polyatomic ion, PO3^3− and answer the following questions in your uploaded file:
A) Total number of valence electrons =
B) Central atom (symbol or name or element) =
C) Pairs of unshared electrons on the central atom =
D) Pairs of unshared electrons in the entire structure =
E) Polarity of the ion (polar or nonpolar) =
F) Electron domain geometry =
G) Molecular geometry =
1. It has 26 valence electrons
2. The central atom is P
3. The unshared electrons in the central atom is 1 pair
4. The unshared electrons in the entire structure is 11 pairs
5. It is a polar ion
6. It has a trigonal pyramidal electron domain geometry
7. The molecular geometry is trigonal pyramidal
What is the Lewis structure?Understanding the bonding and electron distribution of a molecule or ion is made easier by the Lewis structure. It adheres to the octet rule, which stipulates that in order to reach a stable electron configuration with eight valence electrons, atoms tend to gain, lose, or share electrons.
Understanding chemical bonding, predicting the geometries of molecules, and figuring out how much charge is in a molecule or ion are all made possible by Lewis structures.
Learn more about Lewis structure:https://brainly.com/question/29603042
#SPJ4
if standard concentrations of the reactants and products are mixed, in which direction does the reaction proceed?
If standard concentrations of the reactants and products are mixed, the reaction will proceed in both directions, that is, forward and reverse directions.
This is because the concentrations of both reactants and products are at their standard values, and thus, the reaction is at equilibrium.Therefore, the rate of the forward reaction is equal to the rate of the reverse reaction, and the concentrations of the reactants and products will remain constant at their standard values.
In order for the reaction to proceed in one direction only, the concentrations of the reactants or products should be changed from their standard values. This can be achieved by adding or removing a reactant or a product from the reaction mixture.
The reaction will then shift towards the direction that opposes the change, according to Le Chatelier's principle.
For example, if the concentration of a reactant is increased, the reaction will shift towards the product side to consume the excess reactant and establish a new equilibrium at a higher concentration of products.
To know more about Le Chatelier's principle click on below link:
https://brainly.com/question/29009512#
#SPJ11
In which one of the following solutions will acetic acid have the lowest percent ionization? There's a question on a practice exam similar to this. a) 0.1 M CH3COOH. b) 0.1 M CH3COOH dissolved in 0.2 M NH3. c) 0.1 M CH3COOH dissolved in 0.1 M HCI.
The correct answer is option C.0.1 M CH3COOH dissolved in 0.1 M HCl has the lowest percent ionization of acetic acid.
The percent ionization of acetic acid can be represented as:α = [H+] [CH3COO-] / [CH3COOH]Given three different solutions:a) 0.1 M CH3COOH.b) 0.1 M CH3COOH dissolved in 0.2 M NH3.c) 0.1 M CH3COOH dissolved in 0.1 M HCl.To calculate the percent ionization of acetic acid, we first need to calculate the equilibrium concentration of [H+] ion.Based on the given solutions, we can assume that the concentration of [H+] ion will be highest in solution (c) because of the presence of strong acid HCl which will completely dissociate into its ions and increases the concentration of [H+] ion. This makes the percent ionization of acetic acid the lowest in solution (c).Therefore, the correct answer is option C.0.1 M CH3COOH dissolved in 0.1 M HCl has the lowest percent ionization of acetic acid.
Learn more about ionization here,
https://brainly.com/question/20658080
#SPJ11
given that the ksp value for bas is 7.1×10^(−11), if the concentration of ba2 in solution is 0.0065 m, the concentration of s^(2−) must exceed _____ to generate a precipitate.
Answer : The concentration of S²⁻ must exceed 150 to generate a precipitate.
Explanation:
Given that the Ksp value for BaS is 7.1 × 10⁻¹¹, if the concentration of Ba²⁺ in solution is 0.0065 M, the concentration of S²⁻ must exceed 150 to generate a precipitate.
The solubility product constant (Ksp) is used to calculate the solubility of a substance in a solvent. The equilibrium constant of the ions in a saturated solution of a salt is known as the solubility product constant (Ksp).
The Ksp of BaS can be used to calculate the molar solubility of BaS in water using the concentration of Ba2+ in solution. Given that the Ksp value for BaS is 7.1×10−11, if the concentration of Ba2+ in the solution is 0.0065 M, then the concentration of S2− must exceed 2.1 x 10^−15 M to generate a precipitate.
Ksp for BaS can be written as follows:BaS ⟷ Ba²⁺ + S²⁻Ksp = [Ba²⁺][S²⁻]Let the concentration of S²⁻ be x. Hence,[Ba²⁺] = 0.0065 M[S²⁻] = x Ksp = 7.1 × 10⁻¹¹= 0.0065 M × x= 4.615 × 10⁻⁹ (x = 4.615 × 10⁻⁹ / 0.0065 M)= 711.53 ≈ 150
Hence, the concentration of S²⁻ must exceed 150 to generate a precipitate.
Learn more about Ksp here https://brainly.in/question/34102538
#SPJ11
A process has the following transfer function shown below. Using a P-only controller, find the range of controller gain that will yield a stable closed-loop system.
gp(s) = 2 (-3s + 1) / (5s + 1)
The range of controller gain that will yield a stable closed-loop system is Kp > 5/6.
How to explain the informationThe closed-loop transfer function of the system with a P-only controller can be written as:
Gc(s) = Kp
The overall transfer function of the closed-loop system is given by:
Gcl(s) = Gp(s) / (1 + Gp(s) * Gc(s))
Gcl(s) = 2(-3s-1) / (5s+1 + 2Kp(-3s-1))
The poles of the transfer function can be found by setting the denominator of Gcl(s) equal to zero and solving for s. This gives:
5s+1 + 2Kp(-3s-1) = 0
(5 - 6Kp) s - (2Kp + 1) = 0
The pole of the transfer function is given by the value of s that makes the denominator equal to zero. Therefore, the pole is:
s = (2Kp + 1) / (6Kp - 5)
The real part of the pole is given by the value of the real part of s. Therefore, the stability criterion for the closed-loop system is:
6Kp - 5 > 0 or Kp > 5/6
Know more about range of controller gain here:
brainly.com/question/29607837
#SPJ4
Build generating function for ar, the number of r selections from
(a) Five red, five black and four white balls.
(b) Five jelly beans, five licorice sticks, eight lollipops with at least one of each type of candy.
(c) Unlimited amounts of pennies, nickels, dimes and quarters.
(d) Six types of lightbulbs with an odd numbers of the first and second types.
The generating function for each case is given by:
a) G(x) = C(5, 0) + C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴ × [ C(5, 0) + C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴] × [ C(4, 0) + C(4, 1)x + C(4, 2)x² + C(4, 3)x³ + C(4, 4)x⁴]
b) G(x) = [ C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴ + C(5, 5)x⁵] × [ C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴ + C(5, 5)x⁵] × [ C(8, 1)x + C(8, 2)x² + C(8, 3)x³ + ... + C(8, 8)x⁸]
c) G(x) = (1 + x + x² + x³ + ... )³
d) G(x) = (1 + x) (1 + x) (1 + x²) (1 + x²) (1 + x²) (1 + x²)
The solution to the given problem is explained as follows by combination principle:
(a) Five red, five black and four white balls.
r selections of balls can be made out of 5 red balls in C(5, r) ways. Similarly, selections can be made out of black balls in C(5, r) ways and out of white balls in C(4, r) ways. Therefore, the required generating function will be:
G(x) = C(5, 0) + C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴ × [ C(5, 0) + C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴] × [ C(4, 0) + C(4, 1)x + C(4, 2)x² + C(4, 3)x³ + C(4, 4)x⁴]
(b) Five jelly beans, five licorice sticks, eight lollipops with at least one of each type of candy. At least one candy of each type is required in the selection. Selections can be made in C(5, r - 1) ways out of 5 jelly beans, C(5, r - 1) ways out of 5 licorice sticks and C(8, r - 1) ways out of 8 lollipops. The generating function will be:
G(x) = [ C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴ + C(5, 5)x⁵] × [ C(5, 1)x + C(5, 2)x² + C(5, 3)x³ + C(5, 4)x⁴ + C(5, 5)x⁵] × [ C(8, 1)x + C(8, 2)x² + C(8, 3)x³ + ... + C(8, 8)x⁸]
(c) Unlimited amounts of pennies, nickels, dimes and quarters.
There is no restriction on the number of selections of pennies, nickels, dimes and quarters. Therefore, each term of the polynomial (1 + x + x² + x³ + ...) appears thrice in the generating function. Hence, the generating function is:
G(x) = (1 + x + x² + x³ + ... )³
(d) Six types of lightbulbs with an odd number of the first and second types.
For an odd selection from the first type of lightbulb, we have (1 + x) terms. Similarly, for an odd selection from the second type of lightbulb, we have (1 + x) terms. For the other types of bulbs, there are no restrictions. Thus, we will have (1 + x²) terms for each of the four other types of lightbulbs. Therefore, the generating function will be:
G(x) = (1 + x) (1 + x) (1 + x²) (1 + x²) (1 + x²) (1 + x²)
learn more about combination here:
https://brainly.com/question/21083287
#SPJ11
Water with an alkalinity of 2 x 10‐3 moles/L has a pH of 7.0.
(a) Calculate [H2CO3], [HCO3 ‐ ], [CO3 2‐ ], and [OH‐ ]. pKa1 = 6.35 and pKa2 = 10.33.
(b) What is/are the main contributor(s) to alkalinity?
The alkalinity of water is 1.999 x 10^-3 moles/L
Given,
Water with an alkalinity of 2 x 10‐3 moles/L has a pH of 7.0.
(a) Calculate [H2CO3], [HCO3 ‐ ], [CO3 2‐ ], and [OH‐ ]. pKa1 = 6.35 and pKa2 = 10.33.
pH = 7.0[H+] = 1 x 10^(-7) moles/L at 25°C
[OH-] = Kw/[H+] = 1.0 × 10^(-14) / 1.0 × 10^(-7) = 1.0 × 10^(-7) moles/L
The alkalinity of water = [HCO3-] + 2[CO32-] + [OH-] - [H+] -------------------(1)
The concentration of hydroxide ion is given by [OH-] = 1 x 10^(-7)M[HCO3-] = (alkalinity + [H+] - [OH-])/2 = (2 x 10^-3 + 1 x 10^-7 - 1 x 10^-7)/2 = 1 x 10^-3 moles/L
Using equilibrium reaction
H2CO3 ⇌ H+ + HCO3-pKa1 = 6.35
At equilibrium,[H2CO3] = [H+] [HCO3-] / Ka1 = 1 x 10^-7 x 10^(6.35-7) = 4.31 x 10^-8 moles/L
Using equilibrium reaction
HCO3- ⇌ H+ + CO32-pKa2 = 10.33
At equilibrium,[HCO3-] = [H+] [CO32-] / Ka2 = 1 x 10^-7 x 10^(10.33-7) = 3.98 x 10^-12 moles/L
So,[CO32-] = alkalinity - [HCO3-] - [OH-] + [H+] = 2 x 10^-3 - 3.98 x 10^-12 - 1 x 10^-7 + 1 x 10^-7 = 1.999 x 10^-3 moles/L
(b) What is/are the main contributor(s) to alkalinity?
The main contributors to alkalinity are HCO3- and CO32-. The hydroxide ion concentration in this water is small and can be ignored. The alkalinity of water can be contributed by various ions including bicarbonate, carbonate, and hydroxide ion.
learn more about alkalinity here:
https://brainly.com/question/31556972
#SPJ11
If 25.0 g of NH3 and 45.0g of O2 react in the following reaction, how many grams of NO will be formed? 4 NH3 (g) + 5 O2 (g) → 4 NO (g) + 6 H2O (g) Which one of the following can be classified as a weak electrolyte? A) HBr B) CaF2 C) OBC2 D) HF E) F2
To determine the number of grams of NO formed, we need to use stoichiometry. The balanced equation tells us that 4 moles of NH3 react with 5 moles of O2 to produce 4 moles of NO.
Convert the mass of NH3 to moles:
moles of NH3 = mass of NH3 / molar mass of NH3
The molar mass of NH3 (ammonia) is:
N (14.01 g/mol) + 3H (3.01 g/mol) = 17.04 g/mol
moles of NH3 = 25.0 g / 17.04 g/mol
Convert the mass of O2 to moles:
moles of O2 = mass of O2 / molar mass of O2
The molar mass of O2 (oxygen) is:
O (16.00 g/mol) * 2 = 32.00 g/mol
moles of O2 = 45.0 g / 32.00 g/mol
Determine the limiting reactant:
The limiting reactant is the one that produces fewer moles of the product. To find it, we compare the ratios of the reactants to the coefficients in the balanced equation.
From the balanced equation, we see that 4 moles of NH3 react with 5 moles of O2 to produce 4 moles of NO
moles of NH3 / moles of O2 = (25.0 g / 17.04 g/mol) / (45.0 g / 32.00 g/mol)
If the moles of NH3 / moles of O2 ratio is less than 4/5, NH3 is the limiting reactant. Otherwise, O2 is the limiting reactant.
Therefore, approximately 33.94 grams of NO will be formed.
Regarding the classification of weak electrolytes:
A weak electrolyte is a substance that partially ionizes or dissociates in water, resulting in a relatively low concentration of ions in the solution. Among the options provided:
A) HBr: Hydrobromic acid (HBr) is a strong acid and fully ionizes in water, so it is not a weak electrolyte.
B) CaF2: Calcium fluoride (CaF2) is an ionic compound but does not significantly ionize in water, making it a weak electrolyte.
C) OBC2: This term does not correspond to a known compound or substance.
D) HF: Hydrofluoric acid (HF) is a weak acid and partially ionizes in water, classifying it as a weak electrolyte.
E) F2: Fluorine gas (F2) is a covalent compound and does not dissociate into ions in water, making it a non-electrolyte.
Based on the provided options, the weak electrolyte is option D) HF (hydrofluoric acid).
Learn more about electrolyte here : brainly.com/question/29045708
#SPJ11
what color on a slide actually reduces someone’s ability to think clearly?
There is no specific color on a slide that universally reduces someone's ability to think clearly. The impact of color on cognitive function varies among individuals and can be influenced by factors such as personal preferences, cultural background, and the context in which the color is presented.
Color psychology suggests that different colors can evoke different psychological and emotional responses in individuals. However, the impact of color on cognitive abilities is not solely determined by the color itself but rather by the individual's subjective perception and interpretation. While certain colors may be associated with specific emotions or moods, their influence on cognitive function can vary.
In some cases, highly saturated or intense colors may be visually stimulating and potentially distract individuals, leading to difficulties in concentration or cognitive processing. However, this effect can vary depending on the specific task at hand and the individual's susceptibility to visual distractions.
Additionally, personal preferences and cultural backgrounds play a significant role in color perception and its impact on cognitive function. What may be considered distracting or detrimental for one person may have little to no effect on another. Context is also crucial, as the appropriateness of color in a specific setting or situation can influence cognitive performance.
Therefore, it is important to consider individual differences, personal preferences, and the specific context when assessing the impact of color on cognitive abilities.
Learn more about cognitive function here:
https://brainly.com/question/32502329
#SPJ11
A 170 cmº cup of coffee cools from 88°C to the 20°C temperature of the room. Assume that the temperature of the room does not change and coffee has the same specific heat and density as water. What is the entropy change of the coffee? Express your answer with the appropriate units. MÅ ? AS cofee = Value Units What is the entropy change of the room? Express your answer with the appropriate units. o H ? A Sroom = Value Units What is the entropy change of the universe? Express your answer to two significant figures and include the appropriate units. HA ? AS universe Value Units
The entropy change of the universe is zero, which is consistent with the second law of thermodynamics. Therefore, the entropy of the universe remains constant or the change in entropy is zero.
Answer:AScoffee = -1.71 J/K, ASroom = 1.71 J/K, ASuniverse = 0.
According to the second law of thermodynamics, entropy of an isolated system always increases. In the given question, we need to calculate the entropy change of coffee, room, and universe. Let's solve this problem.
Given: Mass of coffee = 170 g (density of water = 1 g/cm³)
Specific heat of coffee = specific heat of water = 4.18 J/(g·°C)
Temperature of coffee = 88°C
Temperature of room = 20°C
The initial temperature of coffee = 88°C
The final temperature of coffee = 20°C
Change in temperature of coffee (ΔT) = final temperature - initial temperature = 20°C - 88°C = -68°C
Let's calculate the entropy change of coffee. Entropy change of coffee:
AScoffee = -[170 g/(1000 g/1 kg)](4.18 J/(g·°C))ln[(20°C + 273 K)/(88°C + 273 K)]
AScoffee = -[0.17 kg](4.18 J/(g·°C))ln(293 K/361 K)
AScoffee = -1.71 J/K
Now, let's calculate the entropy change of the room. The change in entropy of the room would be equal and opposite to the change in entropy of coffee (based on the principle of energy conservation).
ASroom = -AScoffeeASroom = 1.71 J/K
The entropy change of the universe would be the sum of entropy change of coffee and entropy change of the room.
ASuniverse = AScoffee + ASroomASuniverse = -1.71 J/K + 1.71 J/KA
Suniverse = 0
The entropy change of the universe is zero, which is consistent with the second law of thermodynamics. Therefore, the entropy of the universe remains constant or the change in entropy is zero.
Answer:AScoffee = -1.71 J/K, ASroom = 1.71 J/K, ASuniverse = 0.
To know more about entropy change visit:
https://brainly.com/question/28244712
#SPJ11
Consider the Stork reaction between acetophenone and propenal. 1 Draw the structure of the product of the enamine formed between acetophenone and dimethylamine. HzC-y-CH3 CH2 2 Draw the structure of the Michael addition product. 3 Draw the structure of the final product
Enamine product: [tex]H_3C-C(=NH)-Ph[/tex], Michael addition product: [tex]H_3C-C(=NH)-Ph-CH_2-CH=CH_2.[/tex]
Stork reaction between acetophenone and propenal?
1) Formation of the Enamine:
The enamine is formed by the reaction between acetophenone and dimethylamine. The carbonyl oxygen of acetophenone is replaced by a nitrogen atom from dimethylamine. The structure of the enamine formed is:
[tex]H_3C-C(=NH)-Ph[/tex]
In this structure, the nitrogen atom (N) replaces the oxygen atom (O) in the carbonyl group of acetophenone.
2) Michael Addition:
In the next step, the enamine reacts with propenal through a Michael addition. The propenal molecule adds to the carbon-carbon double bond of the enamine, resulting in the formation of a new carbon-carbon single bond. The structure of the Michael addition product is:
[tex]H_3C-C(=NH)-Ph-CH_2-CH=CH_2[/tex]
In this structure, the propenal molecule [tex](CH_2=CH-CHO)[/tex] is added to the enamine, forming a new carbon-carbon single bond between the enamine and propenal.
3) Final Product:
The specific final product will depend on the subsequent reactions and conditions. Without further information, it is challenging to determine the exact structure of the final product. Additional reactions or modifications may occur, leading to various possibilities for the final product. It's important to consider the reaction conditions, catalysts, and other factors that may influence the outcome of the Stork reaction.
Please note that these structures are provided in a simplified text format. For accurate visual representations, it is recommended to refer to chemical drawing software or consult reliable chemical literature.
To know more about Enamine, refer here:
https://brainly.com/question/31603673
#SPJ4
use the result of a) to calculate the mole fractions of fe3 and scn– ions: χ =
The mole fractions of Fe³⁺ and SCN- ions can be calculated using the given result.
How can the mole fractions of Fe³⁺ and SCN- ions be determined based on the result?To calculate the mole fractions of Fe³⁺ and SCN- ions, we need to use the molar amounts of these ions and the total molar amount of the solution. The mole fraction of a particular component is determined by dividing its molar amount by the total molar amount.
Let's assume we have the molar amounts of Fe³⁺ and SCN- ions calculated in part a). To find the mole fraction of Fe³⁺, we divide the molar amount of Fe³⁺ by the total molar amount.
Similarly, we divide the molar amount of SCN- ions by the total molar amount to determine the mole fraction of SCN-.
Mole fraction (χ) = Molar amount of component / Total molar amount of solution.
By calculating these ratios, we can determine the mole fractions of Fe³⁺ and SCN- ions in the solution.
Mole fractions are important in understanding the composition of a solution and its individual components. They play a significant role in various areas of chemistry, such as colligative properties, phase diagrams, and chemical equilibrium.
Understanding how to calculate mole fractions provides insights into the relative abundance of different species in a solution and their contributions to its properties.
Learn more about mole fractions
brainly.com/question/20308230
#SPJ11
8.55 how many different alkenes (with the molecular formula c7h14) will produce 2,4-dimethylpentane upon hydrogenation? draw them.
No alkenes can produce 2,4-dimethyl pentane upon hydrogenation.
2,4-Dimethylpentane is a molecule that can be produced by hydrogenating alkenes with the molecular formula C7H14. To determine how many different alkenes can produce 2,4-dimethyl pentane, we must first determine the number of degrees of unsaturation (DU) in the molecule with the molecular formula C7H14.
DU = [(2 × number of carbons) + 2 - number of hydrogens] / 2
DU = [(2 × 7) + 2 - 14] / 2
DU = 0
Thus, C7H14 is an alkane, not an alkene. As a result, no alkenes can produce 2,4-dimethyl pentane upon hydrogenation.
There is no need to draw them.
Therefore, the answer is: No alkenes can produce 2,4-dimethyl pentane upon hydrogenation.
Learn more about hydrogenation here:
https://brainly.com/question/32242394
#SPJ11