a) A simple random sample of six numbers from the given table is {836362, 701590, 717950, 011142, 927065, 873018}.
Explanation: A simple random sample (SRS) is a subset of individuals from a statistical population in which each member of the subset has an equal probability of being chosen. A table of random digits is a collection of random digits in a table that can be used to select random samples and to conduct statistical sampling and experimentation.
b) The data can be stratified into two categories: Students and Faculty. Stratified Random Sampling is used when the population is heterogeneous. This technique divides the population into various subgroups or strata and samples randomly from each subgroup to create a representative sample. Here, we need to choose 4 students and 2 faculty members.
We can use stratified random sampling as follows: First, we select 4 students and 2 faculty members from their respective lists randomly. The chosen students are Abel, Moskowitz, Kim, and Holland, and the chosen faculty members are Andrews and Lightman. The stratified random sample is {Abel, Moskowitz, Kim, Holland, Andrews, Lightman}.
To know more about probability refer to:
https://brainly.com/question/27342429
#SPJ11
if e = -2.0 v and e° = 1 v a. circle everything that must be true: q=1 q>1 q<1 qkeq b. assuming the temperature is 300k and ne= 2 mol calculate the values of keq and q.
In this scenario, q = 1 and q > 1 must be circled as true statements.
The value of q represents the reaction quotient, which is calculated using the concentrations (or pressures) of reactants and products at any given moment during a chemical reaction. Since q is a dimensionless quantity, it does not have units.
Given that e° = 1 V, we can infer that the standard cell potential is 1 V. The equation relating standard cell potential (e°) to the equilibrium constant (Keq) is:
e° = (0.0592 V/n) x log(Keq)
Rearranging the equation, we find:
[tex]Keq = {10}^{(e° / (0.0592 V/n))} [/tex]
Considering that e = -2.0 V, the potential difference for the reaction under non-standard conditions is -2.0 V. Therefore, to calculate Keq, we substitute e° = -2.0 V and n = 2 mol into the equation:
[tex]Keq = {10}^{((-2.0 V) / (0.0592 V/2 mol))} [/tex]
[tex]= {10}^{(-67.57) } [/tex]
[tex]= 1.15 \times {10}^{ - 68} [/tex]
As for q, since the concentration of the reaction products and reactants is not provided, we cannot calculate its specific value. However, we know that q = 1 because the given information states that e = -2.0 V and e° = 1 V. By convention, when e = e°, q = 1, indicating that the reaction is at equilibrium.
Learn more about concentration here:
https://brainly.com/question/31906648
#SPJ4
For how many of the following DEs does the Theorem of Existence and Uniqueness imply the existence of a unique solution? 1. = In (1 + y²) at the point (0,0). 11. = (x - y) at the point (2, 2). 1. (2-1) = at the point (1,0). = at the point (0, 1).
The DE dy/dx = ln(1 + y^2) at the point (0, 0) does not have a unique solution.
The DE dy/dx = x - y at the point (2, 2) has a unique solution.
The DE (2 - x)dy/dx = y at the point (1, 0) has a unique solution.
To determine if the Theorem of Existence and Uniqueness implies the existence of a unique solution for each differential equation (DE) at the given point, we need to check if the DEs satisfy the conditions of the theorem. The theorem states that for a first-order DE of the form dy/dx = f(x, y) with initial condition (x0, y0), if f(x, y) is continuous and satisfies the Lipschitz condition in a neighborhood of (x0, y0), then there exists a unique solution.
Let's analyze each DE separately:
dy/dx = ln(1 + y^2) at the point (0, 0):
The function f(x, y) = ln(1 + y^2) is continuous for all values of y. However, it does not satisfy the Lipschitz condition in a neighborhood of (0, 0) since its partial derivative with respect to y, ∂f/∂y = (2y) / (1 + y^2), is unbounded as y approaches 0. Therefore, the theorem does not imply the existence of a unique solution for this DE at the point (0, 0).
dy/dx = x - y at the point (2, 2):
The function f(x, y) = x - y is continuous for all values of x and y. Additionally, it satisfies the Lipschitz condition in a neighborhood of (2, 2) since its partial derivative with respect to y, ∂f/∂y = -1, is bounded. Therefore, the theorem implies the existence of a unique solution for this DE at the point (2, 2).
(2 - x)dy/dx = y at the point (1, 0):
Rearranging the equation, we have dy/dx = y / (2 - x). The function f(x, y) = y / (2 - x) is continuous for all values of x and y except at x = 2. However, at the point (1, 0), the function is continuous and satisfies the Lipschitz condition. Therefore, the theorem implies the existence of a unique solution for this DE at the point (1, 0).
dx/dy = y / (x - 1) at the point (0, 1):
The function f(x, y) = y / (x - 1) is not defined at x = 1. Therefore, the function is not continuous in a neighborhood of the point (0, 1), and the theorem does not imply the existence of a unique solution for this DE at that point.
To learn more about unique solution
https://brainly.com/question/31894717
#SPJ11
Let u(x, t) be the unique solution to the following Cauchy problem. Uttc²uxx=0, t> 0, x € (-00,00) x € (-00,00) u(x,0) = f(x) (u, (x,0) = g(x) XE (-00,00) Where vx € R: f(x) = 0, g(x) = {1₁ (0, |x|≤ a ² xa for a given constant a > 0. (A) Draw the string profiles (i.e. the values of u vs. x) at the following times: t = 0,; a a 3a 2a Sa 2c' c'2c C for a = c = 1. (B) By using d'Alambert formula show that 1 vt > 0,VxER, u(x, t) = length((x-ct,x + ct) n (-a, a)), where length((a, b)) = b - a is the length of the interval (a, b).
The given Cauchy problem represents a wave equation for a string, and the solution u(x, t) at different times can be obtained using d'Alembert's formula. The solution represents the length of the interval where the wave is present, bounded by the intersection of certain intervals.
In the given Cauchy problem, the wave equation Uttc^2uxx = 0 represents a wave propagation on a string. The initial conditions are u(x, 0) = f(x) and ut(x, 0) = g(x), where f(x) and g(x) are given functions.
(A) To draw the string profiles at different times, we need to solve the wave equation for the given initial conditions. The string profiles at the following times are:
At t = 0: The initial condition u(x, 0) = f(x) gives the initial string profile.
At t = a, 2a, 3a: The wave travels with a speed c, so at time t = a, the profile will be shifted to the right by distance a, and similarly for t = 2a, 3a.
At t = 2c', c' + 2c', c: The wave travels with a speed c, so at time t = 2c', the profile will be shifted to the right by distance 2c', and similarly for t = c' + 2c', c.
(B) Using d'Alembert's formula, we can express the solution u(x, t) in terms of the initial conditions f(x) and g(x):
u(x, t) = 1/2[f(x - ct) + f(x + ct)] + (1/(2c)) ∫[g(s)ds] from x - ct to x + ct.
Applying the given initial conditions f(x) = 0 and g(x) = 1 for |x| ≤ a, and g(x) = 0 for |x| > a, we can simplify the formula as:
u(x, t) = length((x - ct, x + ct) ∩ (-a, a)),
where length((a, b)) represents the length of the interval (a, b).
Therefore, the solution u(x, t) represents the length of the interval where the wave is present at time t, bounded by the intersection of the interval (x - ct, x + ct) and the interval (-a, a).
To learn more about Cauchy problem visit : https://brainly.com/question/32618339
#SPJ11
please show all steps
4) [10 points) Find T(I), N(t), ay, and ay for the space curve r(t) =(21 - 1)i+rºj-4k.
To find the tangent vector T(t), the normal vector N(t), the binormal vector B(t), and the curvature κ(t) for the space curve r(t) = (21 - t)i + [tex]\sqrt{2t}[/tex]j - 4k, we can use the formulas derived from the Frenet-Serret equations.
Given the space curve r(t) = (21 - t)i + [tex]\sqrt{2t}[/tex]j - 4k, we can find the tangent vector T(t) by differentiating r(t) with respect to t and normalizing the resulting vector. Taking the derivative of r(t), we get dr/dt = ( [tex]\frac{-1}{\sqrt{2t} }[/tex] + [tex]\frac{1}{\sqrt{2t} }[/tex])j. Normalizing this vector, we obtain T(t) = (1, [tex]\frac{1}{\sqrt{2t} }[/tex]), 0).
To find the normal vector N(t), we take the derivative of T(t) with respect to t and normalize the resulting vector. Differentiating T(t), we get dT/dt = (0, -[tex]\frac{1}{2t-\sqrt{2t} }[/tex], 0). Normalizing this vector, we obtain N(t) = ([tex]\frac{1}{\sqrt{2t} }[/tex], -1, 0).
The binormal vector B(t) can be found by taking the cross product of T(t) and N(t). The cross product of T(t) and N(t) is B(t) = (0, 0, -1).
To find the curvature κ(t), we use the formula κ(t) = ||dT/dt|| / ||dr/dt||, where ||...|| represents the magnitude. Calculating the magnitudes, we have ||dT/dt|| =[tex]\frac{1}{2t\sqrt{2t} }[/tex] and ||dr/dt|| = [tex]\frac{1}{\sqrt{2t} }[/tex]. Thus, the curvature is κ(t) = [tex]\frac{1}{4t\sqrt{2t} }[/tex].
Therefore, the tangent vector T(t) is (1, [tex]\frac{1}{\sqrt{2t} }[/tex], 0), the normal vector N(t) is ([tex]\frac{1}{\sqrt{2t} }[/tex], -1, 0), the binormal vector B(t) is (0, 0, -1), and the curvature κ(t) is [tex]\frac{1}{4t\sqrt{2t} }[/tex] for the given space curve r(t) = (21 - t)i + [tex]{\sqrt{2t} }[/tex]j - 4k.
Learn more about vector here:
brainly.com/question/24256726
#SPJ11
rewrite 12a 24ab using a common factor. 12a(0 2b) 12a(1 2b) 12ab(0 2) 12ab(1 24ab)
The expression 12a and 24ab can be rewritten by factoring out the common factor 12a, resulting in 12a(0+2b), 12a(1+2b), 12ab(0+2), and 12ab(1+24ab).
To rewrite the given expression using a common factor, we identify the largest common factor between the terms. In this case, the common factor is 12a. By factoring out 12a from each term, we distribute it to the terms within the parentheses. This allows us to simplify the expression and combine like terms.
The resulting expressions are equivalent to the original expression and have the common factor 12a factored out.
This technique of factoring out common factors is useful for simplifying algebraic expressions and identifying patterns within them.
Learn more about common factor click here :brainly.com/question/21469402
#SPJ11
Assume your gross pay per pay period is $2,850 and you are in the 26 percent tax bracket (ignore provincial taxes). Calculate your net pay and spendable income in the following situations: a. You save $200 per pay period in a TFSA after paying income tax on $2,850. (Omit the "$" sign in your response.) Spendable Income $ b. You save $200 per pay period in an RPP. (Omit the "$" sign in your response.) Spendable Income
The spendable income after saving $200 per pay period in a TFSA would be $1,909.
To calculate your net pay and spendable income in the given situations, we need to consider the tax deduction and the savings amounts. Here's the calculation:
a. TFSA Savings:
Gross Pay per pay period: $2,850
Tax bracket: 26% (income tax rate)
Calculate income tax deduction:
Income tax deduction = Gross Pay * Tax rate
Income tax deduction = $2,850 * 0.26 = $741
Calculate net pay:
Net pay = Gross Pay - Income tax deduction
Net pay = $2,850 - $741 = $2,109
Calculate spendable income after TFSA savings:
Spendable Income = Net pay - TFSA savings
Spendable Income = $2,109 - $200 = $1,909
Therefore, the spendable income after saving $200 per pay period in a TFSA would be $1,909.
b. RPP Savings:
To calculate spendable income after saving $200 per pay period in an RPP, we need to consider the specific tax treatment of RPP contributions, which can vary depending on the jurisdiction and plan rules. Additionally, RPP contributions may have an impact on your taxable income and therefore affect the income tax deduction. As you've mentioned that provincial taxes should be ignored, it's not possible to provide an accurate calculation without further information on the tax treatment of RPP contributions and the applicable rules.
To learn more about TFSA Savings
https://brainly.com/question/30217876
#SPJ11
9.1 Problems 229 In Problems 1 through 10, sketch the graph of the function f defined for all t by the given formula, and determine whether it is periodic. If so, find its smallest period. 一九 21. f(t) = 12 ,-1 St Et 22. f(t) = 12,0 t < 21
To sketch the graph of the given function f and to determine if it's periodic, follow the steps below:
In Problems 1 through 10, sketch the graph of the function f defined for all t by the given formula, and determine whether it is periodic. If so, find its smallest period:一九 21. f(t) = 12 ,-1 St Et 22. f(t) = 12,0 t < 21
Step 1: Sketch the graph of the function f(t) = 12 ,-1 < t < E:
For the function, f(t) = 12 ,-1 < t < E, its graph is a horizontal line at y = 12. It's not a periodic function.
Step 2: Sketch the graph of the function f(t) = 12, 0 < t < 21:For the function, f(t) = 12,0 < t < 21, its graph is a horizontal line at y = 12. It's not a periodic function. Therefore, the given functions are not periodic.
To know more about graph refer to:
https://brainly.com/question/28783974
#SPJ11
The number of minutes that it takes students to fill out an online survey has an approximately normal distribution with mean 11 minutes and standard deviation 2.5 minutes.
a. What percent of students take more than 12 minutes to fill out the survey?
b. What percent of student take between 9 and 14 minutes to fill out the survey?
c. 75% of students fill the survey in less than how many minutes?
d. 80% of students will be within how many standard deviations of the mean?
Given: The number of minutes that it takes students to fill out an online survey has an approximately normal distribution with mean 11 minutes and standard deviation 2.5 minutes.
a. About 34.46% of students take more than 12 minutes to fill out the survey.
b. About 17.3% of students take between 9 and 14 minutes to fill out the survey.
c. 75% of students fill out the survey in less than 12.675 minutes.
d. 80% of students will be within 1.28 standard deviations of the mean.
a. In this problem, we have μ=11 and σ=2.5.
We need to find out the percent of students who take more than 12 minutes to fill out the survey.
Using z-score formula, we get
z=(x−μ)/σ
=(12−11)/2.5
=0.4
Now we can use a standard normal distribution table to find the percentage of students taking more than 12 minutes. Looking up the z-score of 0.4, we get the probability of 0.3446 or 34.46% approximately.
Therefore, about 34.46% of students take more than 12 minutes to fill out the survey.
b. Now we need to find out the percentage of students who take between 9 and 14 minutes to fill out the survey.
Using z-score formula for the lower and upper limits, we get
z_(lower)=(9−11)/2.5
=−0.8
z_(upper)=(14−11)/2.5
=1.2
Now we can use a standard normal distribution table to find the percentage of students taking between 9 and 14 minutes. Looking up the z-score of -0.8 and 1.2, we get the probabilities of 0.2119 and 0.3849 respectively.
The difference between these probabilities gives us the answer:0.3849−0.2119=0.173.
Therefore, about 17.3% of students take between 9 and 14 minutes to fill out the survey.
c. Now we need to find out the time taken by 75% of students to fill out the survey.
Using a standard normal distribution table, we can find the z-score that corresponds to the probability of 0.75.
This is approximately 0.67. Using the z-score formula, we can find out the time taken by 75% of students.
z=0.67
=(x−11)/2.5
Solving for x, we get x=12.675.
Therefore, 75% of students fill out the survey in less than 12.675 minutes.
d. Finally, we need to find out how many standard deviations away from the mean do we have to go to capture 80% of the students.
Using a standard normal distribution table, we can find the z-score that corresponds to the probability of 0.9. This is approximately 1.28.
Using the z-score formula, we can find out the deviation from the mean that corresponds to this z-score.
1.28=(x−11)/2.5
Solving for x, we get x=14.2.
Therefore, the deviation from the mean is 14.2−11=3.2 minutes.
Since 80% of the students lie within this deviation, we can say that 80% of students will be within 3.2/2.5=1.28 standard deviations of the mean.
To know more about z-score, visit:
https://brainly.com/question/29187588
#SPJ11
For the following CPI (Consumer Price Index), data, 2021. CPI = 125 2022: CPI = 129 Compute the inflation rate in 2022.
Inflation rate in 2022 is 3.2%.
To compute the inflation rate in 2022, we need to compare the Consumer Price Index (CPI) values between 2022 and 2021.
The formula to calculate the inflation rate is:
Inflation Rate = ((CPI₂ - CPI₁) / CPI₁) * 100,
where CPI₁ is the CPI in the base year and CPI₂ is the CPI in the subsequent year.
CPI₁ (2021) = 125
CPI₂ (2022) = 129
Using the formula, we can calculate the inflation rate:
Inflation Rate = ((129 - 125) / 125) * 100
= (4 / 125) * 100
= 3.2%
To know more about inflation rate refer here:
https://brainly.com/question/19263433#
#SPJ11
A company makes a certain device. We are interested in the lifetime of the device. It is estimated that around 2% of the devices are defective from the start so they have a lifetime of 0 years. If a device is not defective, then the lifetime of the device is exponentially distributed with a parameters lambda = 2 years. Let X be the lifetime of a randomly chosen device.
a. Find the PDF of X.
b. Find P(X ≥ 1).
c. Find P(X > 2|X ≥ 1).
d. Find E(X) and Var(X).
a) The PDF of X is f(X) = 2 [tex]e^{(-2X)[/tex] for X > 0
b) P(X ≥ 1) is 0.135.
c) P(X > 2 | X ≥ 1) is 0.1357.
d) The expected value of X (lifetime) is 0.5 years, and the variance of X is 0.25 years²
a. For the defective devices (0-year lifetime), the probability is given as 2% or 0.02.
So, the PDF for this case is:
f(X) = 0.02 for X = 0
For the non-defective devices (exponentially distributed lifetime with λ = 2 years), the PDF is given by the exponential probability density function:
f(X) = λ [tex]e^{(-\lambda X)[/tex] for X > 0
Substituting λ = 2, the PDF for non-defective devices is:
f(X) = 2 [tex]e^{(-2X)[/tex] for X > 0
b. To find P(X ≥ 1), we need to integrate the PDF of X from 1 to infinity:
P(X ≥ 1) = [tex]\int\limits^{\infty}_1[/tex] f(X) dX
For the non-defective devices, the integration can be performed as follows:
[tex]\int\limits^{\infty}_1[/tex] 2 [tex]e^{(-2X)[/tex] dX = [tex]\int\limits^{\infty}_1[/tex][-[tex]e^{(-2X)[/tex]]
= (-[tex]e^{(-2\infty)[/tex]) - (-[tex]e^{(-2(1))[/tex]))
= -0 - (-[tex]e^{(-2)[/tex])
= 0.135
Therefore, P(X ≥ 1) is 0.135.
c. To find P(X > 2 | X ≥ 1), we can use the conditional probability formula:
P(X > 2 | X ≥ 1) = P(X > 2 and X ≥ 1) / P(X ≥ 1)
For the non-defective devices, we can calculate P(X > 2 and X ≥ 1) as follows:
P(X > 2 and X ≥ 1) = P(X > 2) = [tex]\int\limits^{\infty}_2[/tex] 2 [tex]e^{(-2X)[/tex] dX
Using integration, we get:
[tex]\int\limits^{\infty}_2[/tex] 2 [tex]e^{(-2X)[/tex] dX = [tex]\int\limits^{\infty}_2[/tex][-[tex]e^{(-2X)[/tex]]
= (-[tex]e^{(-2\infty)[/tex]) - (-[tex]e^{(-2(2))[/tex]))
= -0 - (-[tex]e^{(-4)[/tex])
= 0.01832
Now, let's calculate the denominator, P(X ≥ 1), which we found in the previous answer to be approximately 0.135.
P(X > 2 | X ≥ 1) = P(X > 2 and X ≥ 1) / P(X ≥ 1)
= 0.01832 / 0.135
≈ 0.1357
So, P(X > 2 | X ≥ 1) is 0.1357.
d. For an exponentially distributed random variable with parameter λ, the expected value is given by E(X) = 1 / λ, and the variance is given by Var(X) = 1 / [tex]\lambda^2[/tex].
In this case, λ = 2 years, so we have:
E(X) = 1 / λ = 1 / 2 = 0.5 years
Var(X) = 1 / λ² = 1 / (2²) = 1 / 4 = 0.25 years²
Therefore, the expected value of X (lifetime) is 0.5 years, and the variance of X is 0.25 years².
Learn more about Conditional Probability here:
https://brainly.com/question/10567654
#SPJ4
Grade А Grade point values 4.0 3.7 A- B+ 3.3 B 3.0 D FALL QUARTER 2017 Course Letter Grade Credits CHEM 140 3 CHEM 141 B- 2 ENGL 101 D 5 MATH 151 B 5 B 2.7 2.3 2.0 1.7 دا د ل ن ن ن D+ 1.3 1.0 0.0 The above data comes from a Jacob's transcript. Using the transcript and the conversion chart calculate the GPA for Jacob for FALL QUARTER 2017 to two decimal places. The GPA for Jacob for FALL QUARTER 2017 is The maintenance department at the main campus of a large state university receives daily requests to replace fluorecent lightbulbs. The distribution of the number of daily requests is bell-shaped and has a mean of 37 and a standard deviation of 8. Using the 68-95-99.7 rute, what is the approximate percentage of lightbulb replacement requests numbering between 21 and 377 Do not enter the percent symbol. ans = % Calculate the sample standard deviation of the data shown. Round to two decimal places. х 30 19 29 16 26 25 sample standard deviation
a. The GPA for Jacob for FALL QUARTER 2017 is 2.94.
b. The approximate percentage of lightbulb replacement requests numbering between 21 and 37 is approximately 68%.
c. The sample standard deviation of the given data is approximately 4.08.
a. To calculate the GPA for Jacob for FALL QUARTER 2017, we need to convert each letter grade to its corresponding grade point value and calculate the weighted average.
Using the conversion chart provided, the grade point values for Jacob's courses are as follows:
CHEM 140: Grade B = 3.0, Credits = 3
CHEM 141: Grade B- = 2.7, Credits = 2
ENGL 101: Grade D = 1.0, Credits = 5
MATH 151: Grade B = 3.0, Credits = 5
To calculate the GPA, we need to multiply each grade point value by its corresponding credit and sum them up. Then, divide the total by the sum of the credits.
GPA = (3.0 * 3 + 2.7 * 2 + 1.0 * 5 + 3.0 * 5) / (3 + 2 + 5 + 5)
GPA = 2.94 (rounded to two decimal places)
Therefore, the GPA for Jacob for FALL QUARTER 2017 is 2.94.
b. To calculate the approximate percentage of lightbulb replacement requests numbering between 21 and 37 using the 68-95-99.7 rule, we need to find the z-scores for these values and use the rule to estimate the percentage.
For 21 requests:
z1 = (21 - 37) / 8 = -2
For 37 requests:
z2 = (37 - 37) / 8 = 0
Using the 68-95-99.7 rule, we know that approximately 68% of the data lies within one standard deviation of the mean. Therefore, the approximate percentage of lightbulb replacement requests numbering between 21 and 37 is approximately 68%.
c. To calculate the sample standard deviation of the given data, we can use the following steps:
Calculate the mean (average) of the data.Subtract the mean from each data point and square the result.Calculate the average of the squared differences.Take the square root of the result to obtain the sample standard deviation.Using the provided data:
x = [30, 19, 29, 16, 26, 25]
Mean (average) = (30 + 19 + 29 + 16 + 26 + 25) / 6 = 24.1667 (rounded to four decimal places)
Squared differences: [(30 - 24.1667)^2, (19 - 24.1667)^2, (29 - 24.1667)^2, (16 - 24.1667)^2, (26 - 24.1667)^2, (25 - 24.1667)^2]
Average of squared differences = (2.7778 + 27.7778 + 3.6111 + 64.6111 + 0.6944 + 0.0278) / 6 = 16.6667 (rounded to four decimal places)
Sample standard deviation = sqrt(16.6667) = 4.0825 (rounded to two decimal places)
Therefore, the sample standard deviation of the given data is approximately 4.08.
Read more about standard deviation at; brainly.com/question/475676
#SPJ11
For two events A and B, P(A) = 0.8 and P(B) = 0.2.
If A and B are independent, then P(An B) = ____________
P(A ∩ B) is equal to 0.16 when A and B are independent events.
Step-by-step explanation:
Given:
P(A) = 0.8 (probability of event A)
P(B) = 0.2 (probability of event B)
If events A and B are independent, it means that the occurrence of one event does not affect the probability of the other event. In other words, the probability of both events happening simultaneously is equal to the product of their individual probabilities.
The formula for the intersection of two independent events is:
P(A ∩ B) = P(A) * P(B)
Substituting the given probabilities into the formula:
P(A ∩ B) = 0.8 * 0.2 = 0.16
Therefore, when events A and B are independent with probabilities P(A) = 0.8 and P(B) = 0.2, the probability of their intersection (A ∩ B) is 0.16. This means that there is a 16% chance that both events A and B will occur simultaneously.
Know more about the independent events click here:
https://brainly.com/question/32716243
#SPJ11
The random variables X and Y have joint density function
f(x,y)= 12xy (1-x) ; 0 < X<1 ; 0
and equal to 0 otherwise.
(a) Are X and Y independent?
(b) Find E[X].
(c) Find E[Y].
(d) Find Var(X).
(e) Find Var(Y).
a. the variables are independent. b. E[X] = y or 5/12 (if y is a constant). c. E[Y] = x or 1/2 (if x is a constant). d. (3/5)y - (E[X])^2
(a) independent | Joint density function determines independence
The variables X and Y are independent because the joint density function, f(x, y), can be factored into the product of the marginal density functions for X and Y. If the joint density function can be expressed as the product of the marginal densities, it indicates that the variables are independent.
(b) E[X] = 5/12 | Calculating the expected value of X
To find the expected value of X, we integrate X times its probability density function (PDF) over the range of X. In this case, the range is from 0 to 1. Using the given joint density function, we have:
E[X] = ∫[0,1] x * f(x,y) dx
= ∫[0,1] x * 12xy(1-x) dx
= 12 ∫[0,1] x^2y(1-x) dx
= 12y * (∫[0,1] x^2 - x^3) dx
= 12y * [x^3/3 - x^4/4] from 0 to 1
= 12y * [(1/3) - (1/4)]
= 12y * (1/12)
= y
Therefore, E[X] = y or 5/12 (if y is a constant).
(c) E[Y] = 1/2 | Calculating the expected value of Y
Similar to finding E[X], we integrate Y times its PDF over the range of Y, which is from 0 to 1. Using the given joint density function, we have:
E[Y] = ∫[0,1] y * f(x,y) dy
= ∫[0,1] y * 12xy(1-x) dy
= 12x * (∫[0,1] y^2(1-x)) dy
= 12x * [(1/3) - (1/4)] (integral of y^2 from 0 to 1 is (1/3) - (1/4))
= 12x * (1/12)
= x
Therefore, E[Y] = x or 1/2 (if x is a constant).
(d) Var(X) = 1/12 | Calculating the variance of X
The variance of X can be found by subtracting the square of E[X] from the expected value of X^2. Using the given joint density function, we have:
Var(X) = E[X^2] - (E[X])^2
= ∫[0,1] x^2 * f(x,y) dx - (E[X])^2
= ∫[0,1] x^2 * 12xy(1-x) dx - (E[X])^2
= 12y * ∫[0,1] x^3(1-x) dx - (E[X])^2
= 12y * [(1/4) - (1/5)] - (E[X])^2 (integral of x^3(1-x) from 0 to 1 is (1/4) - (1/5))
= 12y * (1/20) - (E[X])^2
= (3/5)y - (E[X])^2
Since we have already determined that E[X] = y, we substitute this value:
Var(X)
Learn more about variables here
https://brainly.com/question/25223322
#SPJ11
A color-blind man throws once two dice that seem identical to him. Construct the sample space S of this random experiment. Then, calculate and sketch the probability mass or density function (p.m.f. or pdf whichever appropriate) and the cumulative distribution function (CDF) of this process. A second person with proper color vision is also observing the throw. As this second person can verify the dice are actually not identical: one is green and one is orange. Repeat the exercise to reflect the point of view of the second person. Finally, identify the differences and similarities of the two viewpoints; explain
The main similarity between the two viewpoints is that the probability of each outcome is the same. This is because the dice are fair, so each outcome is equally likely.
The test space S of this arbitrary exploration is the set of all conceivable results of the two dice being tossed. Since the color-blind man cannot recognize between the dice, he will as it were be able to tell the distinction between the results based on the whole of the numbers on the two dice.
Hence, the test space S is the set of all conceivable entireties of two dice, which is {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}.
The likelihood mass work (pmf) of this irregular try is the work that gives the likelihood of each conceivable result. Since all of the results within the test space are similarly likely, the pmf is essentially the number of results in each set isolated by the full number of results within the test space. This gives us the taking after pmf:
Result | Likelihood
2 | 1/36
3 | 2/36
4 | 3/36
5 | 4/36
6 | 5/36
7 | 6/36
8 | 5/36
9 | 4/36
10 | 3/36
11 | 2/36
12 | 1/36
The total conveyance work (CDF) of this irregular test is the work that gives the likelihood that the entirety of the two dice will be less than or rise to a certain esteem. To discover the cdf, ready to basically whole the pmf for all of the results that are less than or rise to the given esteem. For illustration, the cdf for esteem 7 is:
P(X <= 7) = 1/36 + 2/36 + 3/36 + 4/36 + 5/36 + 6/36 = 21/36 = 7/12
Ready to proceed in this way to discover the cdf for all conceivable values?
The moment individuals with appropriate color vision can recognize between the two dice, so they will be able to tell the distinction between the results based on the person numbers on the dice.
In this manner, the test space S for the moment individual is the set of all conceivable sets of numbers that can be rolled on two dice, which is {(1, 1), (1, 2), (1, 3), ..., (6, 6)}.
The pmf for the moment an individual is the same as the pmf for the color-blind man since the likelihood of each outcome is still the same. In any case, the cdf will be distinctive, since the moment individual can recognize between the results based on the person numbers on the dice. For illustration, the cdf for the esteem 7 for the moment individual is:
P(X <= 7) = 1/36 + 2/36 + 3/36 + 4/36 + 5/36 + 6/36 + 1/36 = 7/36
Typically since the moment an individual can recognize between the results (1, 6), (2, 5), (3, 4), and (4, 3), which all have an entirety of 7. The color-blind man, on the other hand, cannot recognize between these results, so he would as it were tally them as one result, (6, 6).
The most distinction between the two perspectives is that the moment an individual can recognize between the two dice, whereas the color-blind man cannot. This distinction influences the cdf from the moment an individual can recognize between results that the color-blind man cannot.
The closeness between the two perspectives is that the likelihood of each outcome is the same. Typically since the dice are reasonable, so each result is similarly likely.
To know more about probability refer to this :
https://brainly.com/question/251701
#SPJ4
how many collections of six positive, odd integers have a sum of 18 ? note that 1 1 1 3 3 9 and 9 1 3 1 3 1 are considered to be the same collection.
We used the concept of generating functions and the binomial theorem, there are 33,649 collections of six positive, odd integers that have a sum of 18.
To find the number of collections, we used the concept of generating functions and the binomial theorem. We represented the possible values for each integer as terms in a generating function and found the coefficient of the desired term. However, since we were only interested in the number of collections and not the specific values, we simplified the calculation using the stars and bars method. By arranging stars and bars to represent the sum of 18 divided into six parts, we calculated the number of ways to arrange the dividers among the spaces. This resulted in a total of 33,649 collections of six positive, odd integers with a sum of 18.
To know more about binomial theorem, click here: brainly.com/question/30095070
#SPJ11
8) If the variance of the water temperature in a lake is 32°, how many days should the researcher select to measure the temperature to estimate the true mean within 5° with 99% confidence. 1:001/3
The researcher should select at least 9 days to measure the temperature to estimate the true mean within 5° with 99% confidence.
How many days should the researcher select to measure the temperature to estimate the true mean?The formula for sample size to estimate the true mean within a margin of error with a certain confidence level is:
n = [(z * σ)/ ε]²
where:
n is the sample size
z is the z-score for the desired confidence level
σ is the population standard deviation
ε is the margin of error
In this case, we have:
z = 2.576 for 99% confidence level
σ = √32
ε = 5°
Substituting values into the formula, we get:
n = [(2.576 * √32)/ 5]²
n = 8.5
Therefore, the researcher should select at least 9 days to measure the temperature to estimate the true mean within 5° with 99% confidence.
Learn more about margin of error on:
brainly.com/question/31876031
#SPJ4
Review the proof of tan (A-1) = tana-tan8 1 + (anA)(tan) To complete step 3, which expression must fill in each blank space? tan(A - B) = Step 1: = sin ( AB) COS (A-B) cos(A)cos(8) cos(A)sin(B) sin(A)cos(B) sin(A)sin(B) sinAcos8 - COSASIB Step 2: = cosAcosB + sinAsin sinAcosB - COSASinB Step 3: = COSACOSB + sinAsinB tana-tanB Step 4: = 1+tanA)(tan)
To complete Step 3, the expression that must fill in each blank space is "tan(A) - tan(B)".
In Step 1, the given expression is manipulated using trigonometric identities and simplified.
In Step 2, the product-to-sum identities for sine and cosine are applied to obtain the expression.
In Step 3, the expression is simplified further by substituting "tan(A) - tan(B)" for the blanks.
Step 4 is not shown in the given information, but it likely involves further manipulation or simplification of the expression to reach the desired result of "1 + (tan(A))(tan(B))".
To learn more about COS
brainly.com/question/28165016
#SPJ11
expression is equivalent to 7.659
The formula (7 + 6/10 + 5/100 + 9/1000) is equivalents to 7.659.
To get an expression that equals 7.659, we can use a variety of mathematical procedures and integers. Here's one possible phrase:
(7 + 6/10 + 5/100 + 9/1000)
In this formula, we divide the number 7.659 into four parts: 7 (the whole number component), 6 (the tenths place digit), 5 (the hundredths place digit), and 9 (the thousandths place digit).
We utilise the place value of each digit to transform these digits to fractions. The digit 6 denotes 6/10, the digit 5 denotes 5/100, and the digit 9 denotes 9/1000.
By multiplying these fractions by the whole number 7, we get the following expression:
7 + 6/10 + 5/100 + 9/1000
Let us now simplify this expression:7 + 0.6 + 0.05 + 0.009
The result of the addition is:
7 + 0.6 + 0.05 + 0.009 = 7.659
Since 7.659 is the result of the formula (7 + 6/10 + 5/100 + 9/1000), it follows that 7.659.
For more question on equivalent visit:
https://brainly.com/question/2972832
#SPJ8
1. (a)
EXAMINATION
(i) How many words can be made when AA must not occur?
Using permutation, the total number of words that can be made when AA must not occur is 70.
The number of words that can be made when AA must not occur can be determined through the following ways:
Total number of words that can be made = Number of words that do not have an A + Number of words that have a single A and no other A occurs next to it
The number of words that do not have an A can be determined by arranging the 3 Bs and 2 Cs. This can be done using the following formula:
`(5!)/(3!2!) = 10`
The number of words that have a single A and no other A occurring next to it can be determined by arranging the 4 As, the 3 Bs, and 2 Cs such that no two As occur next to each other.
This can be done by treating AA as a single object. This is called a permutation with repetition which is calculated through the following formula:`
(n+r-1)!/(n-1)!` where n is the number of objects to arrange and r is the number of times an object is repeated.
Thus: `P(2 As, 3 Bs, 2 Cs) = (2+3+2-1)!/(2-1)!3!2! = 60`.
Thus, the total number of words that can be made when AA must not occur:`Total number of words = Number of words that do not have an A + Number of words that have a single A and no other A occurs next to it`= 10 + 60`= 70`.
Hence, there are 70 words that can be made when AA must not occur.
To know more about permutation refer here:
https://brainly.com/question/29990226#
#SPJ11
Find the volume of the region defined by D = {(x, y, z): 0 ≤r+y≤ 1,0 ≤ y + z ≤ 2, 0≤x+z≤ 3}. -J 1 dV, where R is the region bounded by ry = 1, xy = 4, xz = 1, xz = 9, yz = 4, and yz = 9 in the first octant. w² to find the volume of the region Use the transformation r = u², y = v², and z = bounded by the surface √x + √y+√√z = 1 and the coordinate planes.
The volume of the region defined by D, bounded by three planes, can be found by setting up a triple integral and integrating over the given limits.
To find the volume of the region defined by D = {(x, y, z): 0 ≤ r+y ≤ 1, 0 ≤ y+z ≤ 2, 0 ≤ x+z ≤ 3}, we can set up a triple integral over the region D.
First, let's analyze the given inequalities:
0 ≤ r+y ≤ 1: This implies that the region is bounded between the planes r+y = 0 and r+y = 1.
0 ≤ y+z ≤ 2: This indicates that the region is bounded between the planes y+z = 0 and y+z = 2.
0 ≤ x+z ≤ 3: This means the region is bounded between the planes x+z = 0 and x+z = 3.
Now, we can set up the triple integral as follows:
∭_D 1 dV
The limits of integration for each variable can be determined by the given inequalities. Since we have three variables, we will integrate over each one sequentially.
For z:
From the equation x+z = 0, we get z = -x.
From the equation x+z = 3, we get z = 3-x.
Thus, the limits for z are from -x to 3-x.
For y:
From the equation y+z = 0, we get y = -z.
From the equation y+z = 2, we get y = 2-z.
Since we have the inequality r+y ≤ 1, we can rewrite it as y ≤ 1-r.
Thus, the limits for y are from -z to 2-z and 2-z to 1-r.
For r:
Since we have the inequality r+y ≤ 1, we can rewrite it as r ≤ 1-y.
Thus, the limits for r are from 0 to 1-y.
Now, we can set up the integral:
∭_D 1 dV = ∫[0,1] ∫[2-z,1-r] ∫[-x,3-x] 1 dz dy dr
Evaluating this triple integral will give us the volume of the region D.
To learn more about triple integral visit : https://brainly.com/question/32578893
#SPJ11
Use the algebraic properties of vectors to answer the questions below. z a.) -3 + 5 b.) Find a unit vector in the direction of the vector 1
a. [tex]3\left[\begin{array}{ccc}2\\-3\\0\end{array}\right]+5\left[\begin{array}{ccc}-1\\0\\1\end{array}\right] = \left[\begin{array}{ccc}1\\-9\\5\end{array}\right][/tex] by using the algebraic properties of vectors.
b. A unit vector in the direction [tex]\overline{a} = \left[\begin{array}{ccc}1\frac{5}{\sqrt{34} } \\ \frac{-3}{\sqrt{34} }\\ \frac{0}{\sqrt{34} } \end{array}\right][/tex] of the vector [tex]\left[\begin{array}{ccc}5\\-3\\0\end{array}\right][/tex].
Given that,
Use the algebraic properties of vectors for solving the
a. [tex]3\left[\begin{array}{ccc}2\\-3\\0\end{array}\right]+5\left[\begin{array}{ccc}-1\\0\\1\end{array}\right][/tex]
We know that,
By using the algebraic properties of vectors as,
= 3(2i - 3j + 0k) + 5(-i + 0j + k)
= 6i - 9j + 0k -5i + 0j + 5k
= i - 9j + 5k
= [tex]\left[\begin{array}{ccc}1\\-9\\5\end{array}\right][/tex]
Therefore, [tex]3\left[\begin{array}{ccc}2\\-3\\0\end{array}\right]+5\left[\begin{array}{ccc}-1\\0\\1\end{array}\right] = \left[\begin{array}{ccc}1\\-9\\5\end{array}\right][/tex] by using the algebraic properties of vectors.
b. We have to find a unit vector in the direction of the vector [tex]\left[\begin{array}{ccc}5\\-3\\0\end{array}\right][/tex]
The unit vector formula is [tex]\overline{a}= \frac{\overrightarrow a }{|a|}[/tex]
Let a = [tex]\left[\begin{array}{ccc}5\\-3\\0\end{array}\right][/tex]
Determinant of a is |a| = [tex]\sqrt{5^2 +(-3)^2 + (0)^2}[/tex] = [tex]\sqrt{25 + 9}[/tex] = [tex]\sqrt{34}[/tex]
[tex]\overrightarrow a[/tex] = 5i -3j + 0k
Now, we get
[tex]\overline{a}= \frac{\overrightarrow a }{|a|}[/tex] = [tex]\frac{5i -3j + 0k}{\sqrt{34} }[/tex] = [tex]\frac{5}{\sqrt{34} }i + \frac{-3}{\sqrt{34} }j + \frac{0}{\sqrt{34} } k[/tex]
[tex]\overline{a} = \left[\begin{array}{ccc}1\frac{5}{\sqrt{34} } \\ \frac{-3}{\sqrt{34} }\\ \frac{0}{\sqrt{34} } \end{array}\right][/tex]
Therefore, a unit vector in the direction [tex]\overline{a} = \left[\begin{array}{ccc}1\frac{5}{\sqrt{34} } \\ \frac{-3}{\sqrt{34} }\\ \frac{0}{\sqrt{34} } \end{array}\right][/tex] of the vector [tex]\left[\begin{array}{ccc}5\\-3\\0\end{array}\right][/tex].
To know more about vector visit:
https://brainly.com/question/29126814
#SPJ4
find the probability that at most ten offer such courses. (round your answer to four decimal places.)
The probability that at most ten offers such courses depends on the total number of courses available and the probability of an offer being made.
To calculate the probability, we need to know the total number of courses available and the probability of an offer being made for each course. Let's assume there are N courses and the probability of an offer being made for each course is p.
To find the probability that at most ten offers such courses, we can use the binomial probability formula. The probability mass function for a binomial distribution is given by P(X=k) = C(n,k) * p^k * (1-p)^(n-k), where X is the number of offers made, k is the number of successful offers (courses offered), n is the total number of courses, p is the probability of an offer being made, and C(n,k) is the binomial coefficient.
To calculate the probability for the given scenario, we would substitute the appropriate values into the formula and sum the probabilities for k ranging from 0 to 10. However, since we don't have the values for N and p, we cannot provide a specific probability value.
To know more about probability click here: brainly.com/question/31828911
#SPJ11
In manufacturing, cluster sampling could be used to determine if the machines are operating correctly. Which of the following best describes this type of sampling? Homework Help: 1DC. Random/cluster/stratified/convenience/systematic (DOCX) Every 10th product in the line is selected Samples are randomly selected throughout the day Products are put into groups and some are randomly selected from each group Products are put into groups and all are included from several randomly selected groups
Cluster sampling is a type of sampling method where the population is divided into groups or clusters, and then a random selection of clusters is chosen for analysis.
In cluster sampling, the population (machines in this case) is divided into groups or clusters (e.g., based on their location or other relevant factors). Instead of individually selecting machines, entire clusters are randomly chosen. This means that all machines within the selected clusters are included in the sample for analysis.
Cluster sampling is beneficial when it is more practical or efficient to sample groups rather than individual units. By analyzing the selected clusters, one can infer the overall performance of the machines in the manufacturing process.
To learn more about Cluster sampling click here :
brainly.com/question/30639218
#SPJ11
Assume x and y are functions of t. Evaluate dy/dt for the following.
Y³ = 2x² + 6 ; dx/dt = 2, x = 1, y = 2 dy/dt = ___
(Round to two decimal places as needed.)
To find dy/dt, we need to differentiate the equation Y³ = 2x² + 6 with respect to t using implicit differentiation.
Taking the derivative of both sides with respect to t, we have:
3Y² * dY/dt = 4x * dx/dt
We are given dx/dt = 2 and x = 1. Substituting these values, we get:
3Y² * dY/dt = 4 * 1 * 2
Simplifying further:
3Y² * dY/dt = 8
Now, we need to find the value of Y. From the given equation, Y³ = 2x² + 6, we substitute x = 1:
Y³ = 2(1)² + 6
Y³ = 2 + 6
Y³ = 8
Taking the cube root of both sides, we find Y = 2.
Substituting Y = 2 into the previous equation, we have:
3(2)² * dY/dt = 8
Simplifying further:
12 * dY/dt = 8
Dividing both sides by 12:
dY/dt = 8/12
Simplifying:
dY/dt = 2/3
Therefore, dy/dt = 2/3 (rounded to two decimal places).
Learn more about implicit differentiation here: brainly.com/question/11887805
#SPJ11
Find the matrix A' for T relative to the basis B'. T: R2 → R2, T(x, y) = (4x – y, 3x), B' = {(-2, 1), (-1, 1)}
The matrix A' for the linear transformation T relative to the basis B' is a 2x2 matrix that represents the transformation of vectors in R2.
To find the matrix A' for the linear transformation T relative to the basis B', we need to determine how T maps the vectors in B' to their corresponding images.
The basis B' consists of two vectors: (-2, 1) and (-1, 1). We apply the transformation T to these basis vectors and express the results as linear combinations of the basis vectors in the standard basis of R2, which is {(1, 0), (0, 1)}.
For the first basis vector (-2, 1):
T((-2, 1)) = (4(-2) - 1(1), 3(-2)) = (-9, -6) = -9(1, 0) - 6(0, 1)
Similarly, for the second basis vector (-1, 1):
T((-1, 1)) = (4(-1) - 1(1), 3(-1)) = (-5, -3) = -5(1, 0) - 3(0, 1)
The coefficients of the standard basis vectors in these linear combinations give us the columns of the matrix A'. Therefore, A' = [(-9, -5), (-6, -3)].
Thus, the matrix A' for the linear transformation T relative to the basis B' is:
A' = [(-9, -5), (-6, -3)]
This matrix can be used to represent T when operating on vectors in the basis B'.
Learn more about linear transformation here:
https://brainly.com/question/13595405
#SPJ11
Solve the Exact equation (sin(y)- y sin(x)) dr + (1+rcos(y) + cos(x)) dy = 0.
The solution is represented by the equation F(r, y) = C, where F is the integrated function and C is the constant of integration.
To solve the given exact equation, we will use the method of integrating factors. First, we check if the equation is exact by verifying if the partial derivatives of the coefficients with respect to y and r are equal. In this case, sin(y) - ysin(x) does not depend on r, and 1 + rcos(y) + cos(x) does not depend on y, so the equation is exact.
To find the integrating factor, we need to calculate the ratio of the coefficient of dr to the coefficient of dy. In this case, the ratio is (sin(y) - ysin(x)) / (1 + rcos(y) + cos(x)).
Multiplying the entire equation by this integrating factor, we obtain:
(sin(y) - ysin(x)) dr + (1 + rcos(y) + cos(x)) dy = 0
Next, we integrate the left-hand side of the equation with respect to r while treating y as a constant, and integrate the right-hand side with respect to y while treating r as a constant. This allows us to find a function F(r, y) such that dF(r, y) = 0.
The solution to the exact equation is then given by F(r, y) = C, where C is the constant of integration. The equation F(r, y) = C represents the implicit solution to the given exact equation.
Learn more about integration here:
https://brainly.com/question/31744185
#SPJ11
. A Nielsen survey provided the estimate that the mean number of hours of television viewing per household is 7.25 hours per day . assume that the Nielsen survey involved 200 households and that the sample standard deviation was 2.5 hours per day. Ten years ago the population mean number of hours of television viewing per household was reported to be 6.70 hours. Letting 4 = the population mean number of hours of television viewing per household in , test the hypotheses H:HS 6.70 and H: 6.70 . use a = 0.01
We can accept the alternative hypothesis Ha: µ > 6.70. An alternative hypothesis (also known as the research hypothesis) is a statement that contradicts or negates the null hypothesis. It represents the possibility that there is a significant relationship or difference between variables in a study.
Given: A Nielsen survey provided the estimate that the mean number of hours of television viewing per household is 7.25 hours per day.
Assume that the Nielsen survey involved 200 households and that the sample standard deviation was 2.5 hours per day.
Ten years ago the population mean number of hours of television viewing per household was reported to be 6.70 hours.
At α = 0.01, the critical z-value is obtained using a table or calculator.
The critical z-value is zα = 2.3263.
Since the calculated z-value (6.5856) is greater than the critical z-value (2.3263), we reject the null hypothesis and conclude that there is sufficient evidence to support the claim that the mean number of hours of television viewing per household in 2004 is greater than 6.70.
Therefore, we can accept the alternative hypothesis Ha: µ > 6.70.
Visit here to learn more about alternative hypothesis brainly.com/question/30404845
#SPJ11
Find the parametric equation of the line passing through points (−9,5,−9)-9,5,-9 and (−9,−10,−6)-9,-10,-6.
Write your answer in the form 〈x,y,z〉x,y,z and use tt for the parameter.
The parametric equation of the line is:
〈x(t), y(t), z(t)〉 = 〈-9, 5 - 15t, -9 + 3t〉
for 0 ≤ t ≤ 1
How to find the parametric equation of the line?We want to find the parametric equation for the line passing through points (−9,5,−9) and (−9,−10,−6).
Where we want the answer in vector form 〈x,y,z〉, and use t for the parameter.
Let's denote the points as P₁ and P₂:
P₁ = (-9, 5, -9)
P₂ = (-9, -10, -6)
The direction vector of the line can be obtained by subtracting the coordinates of P₁ from P₂:
Direction vector = P₂ - P₁ = (-9, -10, -6) - (-9, 5, -9)
= (-9 + 9, -10 - 5, -6 + 9)
= (0, -15, 3)
Now, we can write the parametric equation of the line in vector form as:
R(t) = P₁ + t * Direction vector
Substituting the values of P1 and the direction vector, we have:
R(t) = (-9, 5, -9) + t * (0, -15, 3)
Expanding the equation component-wise, we get:
x(t) = -9 + 0 * t = -9
y(t) = 5 - 15 * t
z(t) = -9 + 3 * t
Therefore, the parametric equation of the line passing through the points (-9, 5, -9) and (-9, -10, -6) is:
〈x(t), y(t), z(t)〉 = 〈-9, 5 - 15t, -9 + 3t〉
Learn more about parametric equations at:
https://brainly.com/question/30451972
#SPJ4
Show that f(x) is not continuous on R by finding an open subset G of R such that f-1(G) is not open. Clearly describe both G and f-l(G).
f(x) is not continuous on R and G = (1/2, 2), f⁻¹(G) = (1/2, 2)
In order to prove that f(x) is not continuous on R, we must find an open subset G of R such that f⁻¹(G) is not open.
Here's how to do it:
Let f(x) = 1/x on R.
Consider the open interval (1/2, 2).
G = (1/2, 2) is the open set.
Now, we have to find f⁻¹(G).
So, we have: 1/x ϵ G for all x ϵ (1/2, 2)
Then, x > 1/2 and x < 2 or equivalently x ϵ (1/2, 2)
We need to solve for x in 1/x ϵ (1/2, 2)
We have: (1/2) < 1/x < 2
Then, 2 > x > 1/2 (reciprocals flip)
Therefore, f⁻¹(G) = (1/2, 2), which is not an open subset of R since it contains endpoints but it does not include the endpoints.
Thus, we can say that f(x) is not continuous on R.
To learn more about open set
https://brainly.com/question/32510719
#SPJ11
Assume that in 2020, the university realised a drop in revenue of 50%. The business and the engineering schools have a combined revenue decrease of 45%. Of this decrease, 37% is revenue lost from fewer Chinese students enrolling in the two schools. Would the policy be triggered in 2020? Calculate the total amount of premiums paid by the two schools. If the policy is triggered, what is the total insurance payout?
Given in 2020, the university realized a drop in revenue of 50%. The business and the engineering schools have a combined revenue decrease of 45%. Since the policy is not triggered, there is no insurance payout to be made.
Assuming that in 2020, the university realized a drop in revenue of 50%.
The business and the engineering schools have a combined revenue decrease of 45%.
Of this decrease, 37% is revenue lost from fewer Chinese students enrolling in the two schools.
Given that information, we need to calculate the total amount of premiums paid by the two schools and determine whether the policy would be triggered in If it's triggered, we need to calculate the total insurance payout.
The policy would be triggered if the total revenue loss was greater than or equal to the deductible. Assuming that the deductible is $1,000,000, we can calculate the total revenue loss using the following formula:
Total revenue loss = Combined revenue decrease - Revenue lost from fewer Chinese students
Total revenue loss = 45% - (37% x 45%)
Total revenue loss = 28.35%
Since the total revenue loss is less than the deductible, the policy would not be triggered in 2020.
Now, let's calculate the total amount of premiums paid by the two schools.
Assuming that the premium rate is 2%, we can calculate the total premiums paid using the following formula:
Total premiums paid = Total revenue x Premium rate
Total revenue = Combined revenue of business and engineering schools = 45%
Total premiums paid = 45% x 2%
Total premiums paid = 0.9%
Finally, if the policy were triggered, the total insurance payout would be the difference between the total revenue loss and the deductible.
To learn more about insurance payout
https://brainly.com/question/31072961
#SPJ11