PLEASE HELP
According to Newton's law of universal gravitation, how are mass and
gravitational force related?
A. Mass and gravitational force are the same.
B. An increase in mass is a decrease in force.
C. An increase in mass is an increase in force.
O D. Mass and gravitational force are not related.

Answer:

Lithium nitride. Trilithium nitride. 26134-62-3. Lithium nitride (Li3N) Li3N.

Answer:

1) 1.39 * 10²³ atoms

Explanation:

Answer:

O-H

Explanation:

It is polar covalent bond, because the hydrogen atom has electronegativity about 2.6, and the oxygen atom, electronegativity about 3.6. When the difference in electronegativity of the atoms is between 0.4 and 1.7, the result is a polar covalent bond.

Answer:

Explanation:

IIA elements in the periodic table are the alkali earth metals

The picture that correctly shows the path of the reflected light ray is: Picture A.

A ray diagram can be defined as the graphical representation of the possible paths that a light wave takes from one point (source) to another.

Basically, some of the phenomenon and properties associated with light ray include the following:

A reflected light ray completely bounces off a surface and as such, light wave do not pass through the surface as illustrated in Picture A.

Read more on reflected light here: https://brainly.com/question/14320820

The liquified (/molten) MgCl₂ dissociates into Mg²⁺ and Cl⁻ ions;

The Cl⁻ ions are drawn to the positive electrode (which has a deficit of electrons) where they deposit electrons since they are negatively charged;

This yields Cl atoms (these will form Cl₂ gas by covalent bonding and bubbles will be seen as this gas rises out of the liquid and it will enter the air);

These electrons will flow from the positive electrode to the negative electrode;

The Mg²⁺ ions, conversely, will be drawn to the negative electrode or cathode (which has a surplus of electrons partly from those the Cl⁻ ions lose) where they pick up electrons since they have a positive charge;

This yields pure magnesium.

The magnesium has been produced with the application of electric current for the production of ions that accumulate at the electrodes.

The setup has been for the electrochemical process. The sample in the molten state has been applied with the electric current. The current results in the dissociation of the sample into ionic constituents.

The opposite charge attracts negative charge. Thus, the negative ion moves towards the positive electrode, and negative ion move towards the positive electrode. The accumulation of ions has been obtained from the electrodes.

The magnesium chloride under the influence of electric field has been converted into the positive Mg ions and negative Cl ions. The positive Mg ion will move towards the negative electrode, and thus Mg has been produced.

For more information about negative electrode, refer to the link:

https://brainly.com/question/14702745

Answer:

Ok

Explanation:

The oxidation half equation is Zn ------> Zn^2+ + 2e while the reduction half equation is Cu^2+  + 2e------> Cu.

A redox reaction is a reaction in which there is a loss/gain of electrons. The specie that gives out electrons experiences an increase in oxidation number while the specie that gains the electrons experiences a decrease in oxidation number.

For the reaction; CuCl2 + Zn → ZnCl2 + Cu

The oxidation half equation is;

Zn ------> Zn^2+ + 2e

The reduction half equation is;

Cu^2+  + 2e------> Cu

The chloride ion is excluded because its oxidation number does not change from left to right in the reaction.

Learn more: https://brainly.com/question/967776

The IUPAC name for N2O is nitrous oxide.

The IUPAC name with the full meaning (International Union of Pure and Applied Chemistry) is a system of naming chemical compounds by chemical scientists.

The given IUPAC name to N2O is nitrous oxide. Nitrous oxide is commonly known as the laughing gas is a colorless gas with a pleasant, sweetish odor and taste that, when breathed, causes placidity to pain.

Nitrous oxide has several medicinal applications due to its anesthetic and pain-relieving properties, and it can be given by Medical professionals.

Learn more about the IUPAC system of nomenclature here:

https://brainly.com/question/13517857?referrer=searchResults

What is the IUPAC name for N2O?

B. dinitrogen monoxide

What is the common name for N2O?

D. nitrous oxide

Answer: 82.0 g/mole

Explanation:

Use the units to see that if we divide 1.64 grams by 0.0200 moles, we'll get a number that is grams/mole, the definition of formula mass.

1.64/0.0200 = 82.0 g/mole (3 sig figs)

We can't tell from this alone what the molecular formula might be, but C6H10 (cyclohexene) comes close (82.1 grams/mole).

The formula mass of the compound will be approximately 82.0 g/mol

The formula mass of the compound is the sum of atomic masses of all the atoms in its chemical formula. It is calculated by adding up the atomic masses of the individual elements in the compound, each multiplied by the subscript indicating the number of atoms of that element in the formula.

To find the formula mass of the compound, we'll use the relationship between moles, mass, and molar mass.

Molar mass (in g/mol) = Mass (in g)/Moles

Given:

Mass = 1.64 g

Moles = 0.0200 moles

Let's plug the values and calculate molar mass:

Molar mass = 1.64 g / 0.0200 moles

Molar mass ≈ 82.0 g/mol

The formula mass of the compound is approximately 82.0 g/mol, rounded to three significant figures.

To know more about formula mass here

https://brainly.com/question/28647347

#SPJ3

Explanation:

In SO2 , the bond angle is 119^∘ whereas in SO3 , the bond angle is 120^∘ .H2S = 92.1°

Answer:

In SO2 , the bond angle is 119^∘ whereas in SO3 , the bond angle is 120^∘ .

Explanation:

S atom in both SO2 and SO3 is sp^2-hybridized.

There are 3 bonding sets of electrons and one non-bonding pair on the sulphur. So the shape is based on a tetrahedral structure - but the extra repulsion of the non-bonding pair will decrease the O-S-O angles by a few degrees from the 'perfect' tetrahedral angle.

The bonding in SO3 can be described as a combination of 3 resonance forms of 1 double and 2 single bonds. The SO2 molecule has a dipole moment, The starting point of 109.5 degrees is only applicable for 4 electron regions round the central atom. In SO2, we have 2 double bonds and one lone pair ; 3 electron regions so the default angle is 120 degrees. The extra repulsion of the lp vs double bonds accounts for reduction to 119. S atom in both SO2 and SO3 is sp2-hybridized. But it is related to dipole moment and assertion is the explanation from bent angle so here reason is unable to give explanation of assertion.

Answer:

How to Write the Net Ionic Equation for H2SO4 + MgCO3 = MgSO4 + H2O + CO2 -

A net ionic equation also contains the spectator ions, whereas a net ionic equation just displays the chemical species that are involved in a process.

H₂SO₄ (aq) + MgCO₃ (s) →H₂O (l) + CO₂(g) + MgSO₄(aq)  

Learn more about the Net ionic equation with the help of the given link:

https://brainly.com/question/22885959

#SPJ2

Answer:

the answer is d

Explanation:

i know

To solve this, we have to turn the moles into atoms:

2.5 moles/1 x 6.022x10^23 atoms/1 mole = 15.05 x 10^23 atoms

Answer: 15.05 x 10^23 atoms

I hope this helps!

Silicon is the eighth most abundant element in the Universe. There will be 15.05 * 10²³ atoms in the silicon.

Silicon is the eighth most abundant element in the Universe; it is made in stars with a mass of eight or more Earth suns.

Near the end of their lives these stars enter the carbon burning phase, adding helium nuclei to carbon to produce oxygen, neon, magnesium and silicon.

1 mole contains  6.022x10²³ atoms.

2.5 mole contains = x atoms.

x= 2.5 moles/ 6.022x10²³ atoms.  

  = 15.05 x 10²³ atoms

Therefore, Silicon is the eighth most abundant element in the Universe. There will be 15.05 * 10²³ atoms in the silicon.

To learn more about silicon, refer to the link:

https://brainly.com/question/15412188

#SPJ2

Considering the definition of intermolecular bond, the correct answer is second option: Both the melting point and boiling point are lower.

The molecules of covalent compounds can be held together through electrostatic interactions known as "intermolecular forces", which are characterized by holding more than one molecule together. Therefore, they are related to chemical bonds, which have the goal of making molecules stick together or separate.

In other words, intermolecular forces or bonds are those interactions that hold molecules together. These are electrostatic forces.

The presence of these forces explains, for example, the properties of solids and liquids.

They differ from intramolecular forces, because of these, they correspond to interactions that hold the atoms in a molecule together. In general, intermolecular forces are much weaker than intramolecular forces.

On the other side, the melting point is the temperature at which a substance goes from solid to liquid at a given pressure. Similarly, the boiling point is the temperature at which the substance passes from a liquid to a gaseous state.

Finally, the more intense the intermolecular forces, the higher the melting point and the boiling point of a substance because these are the forces that must be overcome to separate them.

In summary, the correct answer is second option: Both the melting point and boiling point are lower.

Learn more:

Water has relatively strong hydrogen bonds holding the molecules together but CO2 has only dispersion forces acting as intermolecular forces. The weaker intermolecular forces explains why CO2 is a gas whereas H2O is a liquid at room temperature

Answer:

Symbol: Sr2+

Element: Strontium

Explanation:

Strontium will have 38 protons, 38 electrons, and the neutron will depend on the isotope but there will usually be 48, 49, or 50 neutrons

Hope this Helps

Answer:

a chemical compound

Explanation:

copper(ii) chlorate is a chemical compound of the transition metal copper and the chlorate anion with basic formula cu(cio)3 and 2

Answer:

The ans is : A. Electron, proton, hydrogen atom, helium atom.

An atom consist of sub atomic particles. The order of particles from least massive to most massive is electron, proton, hydrogen atom, helium atom. The correct option is A.

The particles which are smaller in size than the atom are known as the sub atomic particles. An atom generally contains three sub atomic particles, they are protons, electrons and neutrons. The electrons revolve around the nucleus whereas the protons and neutrons are present at the center of the nucleus.

The protons are positively charged particles whereas the electrons are negatively charged. The neutrons are chargeless. The atomic number of 'H' atom is 1 and that of 'He' atom is 2.

The mass of e⁻ is 9.1 × 10⁻³¹ kg, proton is 1.67 × 10⁻²⁷ kg, 'H' atom is 1.66 × 10⁻²⁴ g, 'He' is 4 g. Thus the order is:

electron, proton, hydrogen atom, helium atom

Thus the correct option is A.

To know more about atom, visit;

https://brainly.com/question/14214017

#SPJ6

Answer:

[tex]\boxed {\boxed {\sf 5.6 \ L \ O_2}}[/tex]

Explanation:

We are asked to find the volume of 0.25 moles of oxygen gas.

At standard temperature and pressure or STP, one mole of any gas has a volume of 22.4 liters.

We want to convert 0.25 moles of oxygen gas or O₂ to liters. We will use dimensional analysis, so we must set up a conversion factor.

[tex]\frac {22.4 \ L \ O_2}{1 \ mol \ O_2}[/tex]

We are converting 0.25 moles of oxygen gas, so we multiply the conversion factor by this value.

[tex]0.25 \ mol \ O_2 *\frac {22.4 \ L \ O_2}{1 \ mol \ O_2}[/tex]

The units of moles of oxygen gas cancel.

[tex]0.25 *\frac {22.4 \ L \ O_2}{1 }}[/tex]

[tex]0.25 * 22.4 \ L \ O_2[/tex]

[tex]5.6 \ L \ O_2[/tex]

0.25 moles of oxygen gas occupy 5.6 liters at standard temperature and pressure.

Answer:

2Be + O2 = 2BeO

its a synthesis

Explanation:

246800 tons of sulfur dioxide was emitted by the utility company who burned 6.17 million tons of coal.

6.17 million tons of coal contain 2.00% sulfur, hence the weight of sulfur is:

Weight of sulfur = 2% of 6.17 million tons = 0.02 * 6170000 = 123400 tons

123400 tons of sulfur is found in 6.17 million tons of coal

The weight of sulfur dioxide is twice that of sulfur, hence:

Amount of sulfur dioxide emitted = 2 * 123400 tons  = 246800 tons

246800 tons of sulfur dioxide was emitted.

Find out more at: https://brainly.com/question/22255610

a.

Ionic bond is a bond in which there is complete transfer of valence electrons between atoms.

The atom that loses the valence electron is called the electron donor while the atom that accepts the electron is called the electron acceptor.

Ionic bond usually occurs between metals and non metals.

Ionic bond is a bond in which there is complete transfer of valence electrons between atoms.

b.

The force of attraction between Na⁺ and Cl⁻ forms the ionic bond.

Since the atoms are now charged, the force of attraction between them forms the ionic bond.

c.

The force of attraction between Mg²⁺ and O²⁻ forms the ionic bond.

Since the atoms are now charged, the force of attraction between them forms the ionic bond.

Learn more about ionic bond here:

https://brainly.com/question/13526463

An ionic or electrovalant bond is a type of chemical bond, which is formed  from two ions (charged atoms by loosing or gaining electrons) having opposite charges.

Ionic bonds are formed from the transfer of electrons from one atom to another. As the electrons are transferred there occurs a positively charged ions (cations) and a negatively charged ions (anions). These ions are held together in a crystal lattice structure by the strong electrostatic attraction between the positively charged cations and negatively charged anions.

The electrons are transferred as the atoms have tendencies to achieve a stable electronic configuration. They do this to attain a stable atomic structure. By transferring the electrons they attain their octet or duplet.

Sodium chloride(NaCl) is formed when the atom of sodium combines chemically with chlorine atom to generate an ionic compound.

Since sodium has an atomic number of 11, its electronic configuration is 2, 8, 1. There is only one electron in the outermost shell of a sodium atom. Therefore, the sodium atom gives one electron to produce the sodium ion Na⁺.

Chlorine has an atomic number of 17. Hence, its electronic configuration is 2, 8, and 7. The chlorine atom contains seven electrons in its outermost shell and requires one more electron to create the inert gas’s stable, eight-electron configuration. Consequently, a chlorine atom accepts one electron and creates the negatively charged chloride ion (Cl⁻).

When sodium interacts with chlorine, it donates its outermost electron to the chlorine atom, forming a sodium ion (Na⁺) and a chloride ion (Cl⁻) by accepting an electron. The strong electrostatic force of attraction between the newly created ions, holds sodium and chloride ions together to create sodium chloride, Na⁺Cl⁻ or NaCl.

Similarly in the case of Magnesium Oxide (MgO) is formed from the chemical interactions of Magnesium and oxygen atoms, leading to the formation of an ionic compound.

Since magnesium has an atomic number of 12, its electrical configuration is 2, 8 and 2, there is just 2 electrons in the outermost shell of a Magnesium atom. Therefore, the magnesium atom gives two electron to produce the Magnesium ion Mg²+ .

Oxygen has an atomic number of 8. Hence, its electronic configuration is 2 and 6, the oxygen atom contains 6 electrons in its outermost shell and requires 2 more electron to create the inert gas’s stable, eight-electron configuration. Consequently, a oxygen atom accepts 2 electronelectrons and creates the negatively charged oxide ion (O²-).

When magnesium interacts with oxygen, it donates its outermost electrons to the oxygen atom, generating a Magnesium ion Mg²+ .  And an oxygen ion (O²⁻) by acquiring 2 electrons. The attractive electrical force holds magnesium and oxygen   ions together to create sodium chloride,        Mg²⁺ O²⁻ or MgO.

Learn more about ionic bond :

https://brainly.com/question/11527546

4NH₃(g) + 6NO(g) → 5N₂(8) + 6H₂O(l)

The mole ratio of NO to NH₃ based on the balanced equation is 6 to 4 (or 3 to 2 in the simplest form)

Therefore in the reaction, there are ³/₂ more moles of NO than NH₃.

⇒ since moles of NH₃ = 2.45 mol  

   then moles of NO    =   2.45 mol × ³/₂  

                                     =   3.675 mol

Answer:

temperature

Explanation:

its in the book

Answer: agitation

Explanation:

Un elemento químico, o un elemento, se define como un material que no puede descomponerse ni transformarse en otra sustancia por medios químicos. Cada elemento se identifica según la cantidad de protones que tiene en su núcleo atómico. Se puede crear un nuevo elemento agregando más protones a un átomo.

_________

Espero eso ayude ⚜

ITZY :)

Answer:

molarity 0.1

Explanation:

mass of copper nitrate =2.4

no of moles exist in 120ml= 2.4/187.5=0.0128mole

molarity =.0.0128/.12=0.1m