Indicate whether each statement is true or false. Drag the appropriate items to their respective bins. Reset Help We balance chemical equations as we do because energy must be conserved. You can balance the "water-splitting" reaction H2O(l) + H2(g) + O2(g) by writing in this way: H,02(1) + H2(g) + O2(g) If the reaction 203(g) + 302(g) goes to completion and all O3 is converted to O2, then the mass of O3 at the beginning of the reaction must be the same as the mass of O2 at the end of the reaction. True False

The value of q  when 0.100 g of ice is cooled from -10.0 0c to -75.0 0c is calculated to be -13.56 J meaning heat was lost.

To calculate q, which represents the amount of heat transferred, we need to use the formula:

q = m × cs × ΔT

Where:
- m is the mass of the substance (in grams)
- cs is the specific heat capacity of the substance (in J/g.K)
- ΔT is the change in temperature (in K or °C)

In this case, we have:

- m = 0.100 g (mass of ice)
- cs = 2.087 J/g.K (specific heat capacity of ice)
- ΔT = (-75.0 °C) - (-10.0 °C) = -65.0 °C (change in temperature)

Note that we need to use the absolute values of temperatures in Kelvin (K) in the formula, but since we're only interested in the temperature difference, we can use Celsius (°C) as well.

Now we can plug in the values and calculate q:

q = 0.100 g × 2.087 J/g.K × (-65.0 °C)
q = -13.56 J

The negative sign indicates that heat was transferred out of the ice (i.e. it lost heat) as it was cooled down.

More on q calculation: https://brainly.com/question/29993661

#SPJ11

The pH at the equivalence point of the titration of a 25.0-mL sample of 0.150-mol L−1 acetic acid with 0.150-mol L−1 NaOH solution is 9.26 (Option C).

The equivalence point of the titration occurs when moles of NaOH added is equal to moles of acetic acid present in the solution.

Moles of acetic acid present initially = 0.150 mol/L × 25.0 mL/1000 mL = 0.00375 mol

Moles of NaOH required to neutralize acetic acid = 0.00375 mol

Volume of NaOH required = 0.00375 mol / 0.150 mol/L = 0.025 L = 25.0 mL

At the equivalence point, the solution contains only sodium acetate and water.

Moles of sodium acetate formed at equivalence point = 0.00375 mol

Concentration of sodium acetate = 0.00375 mol / 0.025 L = 0.15 mol/L

Since sodium acetate is a salt of a weak acid (acetic acid) and a strong base (NaOH), the solution will be basic.

The pH at the equivalence point can be calculated using the following equation:

pH = pKb + log([base]/[acid])

Since sodium acetate is the conjugate base of acetic acid, we can use the Kb expression for the acetate ion:

Kb = Kw/Ka = 1.0 × [tex]10^-^1^4[/tex]/1.8 × [tex]10^-^5[/tex] = 5.56 × [tex]10^-^1^0[/tex]

pKb = -log(Kb) = -log(5.56 × [tex]10^-^1^0[/tex]) = 9.26

[base]/[acid] = 1 since the moles of acid and base are equal at equivalence point

pH = 9.26 + log(1) = 9.26

Therefore, the pH at the equivalence point is 9.26 (Option c).

Learn more about Equivalence point

brainly.com/question/31375551

#SPJ11

(a) The galvanic cell has a cathode half-reaction of NO₃⁻(aq) + 4H⁺(aq) + 3e⁻ → NO(g) + 2H₂O(l)

(b) An anode half-reaction is 3Cu⁺(aq) → 3Cu₂⁺(aq) + 3e⁻

(c) A cell voltage under standard conditions is +0.44 V.

The half-reaction that takes place at the cathode is:

NO₃⁻(aq) + 4H⁺(aq) + 3e⁻ → NO(g) + 2H₂O(l)

The half-reaction that takes place at the anode is:

3Cu⁺(aq) → 3Cu₂⁺(aq) + 3e⁻

To calculate the cell voltage under standard conditions, we can use the standard reduction potentials for each half-reaction. The standard reduction potential for the half-reaction at the cathode is +0.96 V, and the standard reduction potential for the half-reaction at the anode is +0.52 V.

The cell voltage is calculated by subtracting the anode potential from the cathode potential:

E°cell = E°cathode - E°anode

E°cell = (+0.96 V) - (+0.52 V)

E°cell = +0.44 V

Therefore, the cell voltage under standard conditions is +0.44 V.

Learn more about Half-reaction

brainly.com/question/10668307

#SPJ11

The protective effect of estrogen-like compounds is likely due to a combination of their effects on estrogen receptors and their antioxidant and anti-inflammatory properties.

Estrogen-like compounds, also known as phytoestrogens, are naturally occurring compounds found in plants that can mimic the effects of estrogen in the body. These compounds have been shown to have a protective effect against various diseases, including cancer, cardiovascular disease, and osteoporosis.

The exact mechanism of the protective effect of estrogen-like compounds is not fully understood, but it is thought to be related to their ability to interact with estrogen receptors in the body. These receptors are present in various tissues, including the breasts, uterus, bones, and cardiovascular system.

When estrogen-like compounds bind to estrogen receptors, they can mimic the effects of estrogen, such as promoting cell growth and differentiation, increasing bone density, and improving lipid profiles. However, unlike estrogen, these compounds have a weaker binding affinity to estrogen receptors, which means that they do not have the same potent effects on the body.

To know more about estrogen here

https://brainly.com/question/8477222

#SPJ4

2 is the smallest number of carbons that required for a ketone .The correct answer is d. 2.

This is because the ketone functional group (-C=O) must be attached to a carbon atom, and the molecule must also have at least one other carbon atom to be considered an organic molecule. Therefore, the smallest possible molecule containing a ketone functional group would have two carbons: one for the ketone functional group and one for the other carbon atom. A ketone functional group has a carbonyl group (C=O) with two carbons attached to it.

Therefore, the minimum number of carbons required for a ketone is 2. An example of the simplest ketone is acetone, with the formula [tex]CH_3COCH_3[/tex]. Therefore, the correct option is d. 2 .

To know more about Ketone refer here :

https://brainly.com/question/27179090

#SPJ11

The equilibrium constant (K) for the reaction catalyzed by phosphoglucomutase can be calculated using the formula:

ΔG° = -RTlnK

Where ΔG° is the standard free energy change (-7.1 kJ/mol in this case), R is the gas constant (8.314 J/mol*K), and T is the temperature in Kelvin (37°C = 310 K).

Solving for K, we get:

K = e^(-ΔG°/RT) = e^(-(-7.1*10^3)/(8.314*310)) = 0.075

To calculate ΔG at 37°C when the concentration of glucose-1-phosphate is 1 mM and the concentration of glucose-6-phosphate is 25 mM, we can use the formula:

ΔG = ΔG° + RTln(Q)

Where Q is the reaction quotient, calculated as [glucose-6-phosphate]/[glucose-1-phosphate]. Substituting the values, we get:

Q = [glucose-6-phosphate]/[glucose-1-phosphate] = 25/1 = 25

ΔG = -7.1*10^3 + 8.314*310*ln(25) = 5.5*10^3 J/mol = 5.5 kJ/mol

Since ΔG is positive, the reaction is not spontaneous under these conditions.

Therefore, the equilibrium constant for the reaction is 0.075 and the reaction is not spontaneous under the given concentrations of glucose-1-phosphate and glucose-6-phosphate at 37°C.

#SPJ11

Learn more about equilibrium constant: https://brainly.com/question/3159758

The structural formula for the β-ketoester formed in this reaction can be drawn as follows:
CH3CH2COOCH2CH3 + CH3COOCH2CH3 → (CH3CH2CO)2CHCOOCH2CH3 + CH3CH2OH

- Stoichiometry refers to the quantitative relationship between reactants and products in a chemical reaction. It is often expressed in terms of mole ratios.
- Condensation is a type of chemical reaction in which two molecules combine to form a larger molecule, often with the loss of a small molecule such as water or alcohol.
- Organic refers to compounds that contain carbon atoms bonded to hydrogen atoms, and often other elements such as oxygen, nitrogen, and sulfur.
Now, let's consider the Claisen condensation of ethyl butanoate with the following ester:
CH3CH2COOCH2CH3 + CH3COOCH2CH3 → (CH3CH2CO)2CHCOOCH2CH3 + CH3CH2OH
This reaction involves the condensation of two esters, and results in the formation of a β-ketoester (also known as a p-ketoester) as the major product. The β-ketoester has a carbonyl group (C=O) at the β-position (i.e. the second carbon atom) of the ester group.
The structural formula for the β-ketoester formed in this reaction can be drawn as follows:
CH3CH2COOCH2CH3 + CH3COOCH2CH3 → (CH3CH2CO)2CHCOOCH2CH3 + CH3CH2OH
As you can see, the β-Keto ester has an ethyl group (CH3CH2) attached to the β-carbon, and a methyl group (CH3) attached to the carbonyl carbon. The ester groups on either side of the β-Keto ester are also shown.

learn more about Stoichiometry Refer: https://brainly.com/question/30215297

#SPJ11

The concentration of NH3 in the buffer after the addition of HCl is 0.29062 M.

To answer this question, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

In this case, NH3 is the base (A-) and NH4+ is the acid (HA). The pKa for NH3 is 9.24, so the pKb is 4.74 (pKb + pKa = 14).

Before the addition of HCl, the buffer contains equal amounts of NH3 and NH4+, so [A-]/[HA] = 1. Plugging this into the Henderson-Hasselbalch equation, we can find the pH:

pH = pKa + log(1) = 9.24 + 0 = 9.24

Now let's consider what happens when we add HCl. HCl is a strong acid that will completely dissociate in water, so we can assume that all of the HCl will react with NH3 to form NH4+ and Cl-.

NH3 + HCl → NH4+ + Cl-

To figure out how much NH3 is left in the buffer, we need to first calculate how much NH4+ is formed. The amount of NH4+ formed is equal to the amount of HCl added, since NH3 and HCl react in a 1:1 ratio.

moles of HCl = volume of HCl (in L) x concentration of HCl
moles of HCl = 7.50 mL x (1 L/1000 mL) x 0.125 mol/L = 0.000938 mol

So, 0.000938 mol of NH4+ is formed. This means that the concentration of NH4+ in the buffer has increased by:

Δ[NH4+] = moles of NH4+ formed / total volume of buffer
Δ[NH4+] = 0.000938 mol / 0.1 L = 0.00938 M

Since we started with equal concentrations of NH3 and NH4+, the concentration of NH3 must have decreased by the same amount:

Δ[NH3] = -0.00938 M

Therefore, the new concentration of NH3 in the buffer is:

[NH3] = 0.300 M - 0.00938 M = 0.29062 M

So, the concentration of NH3 in the buffer after the addition of HCl is 0.29062 M.

Know more about Henderson-Hasselbalch equation here:

https://brainly.com/question/13423434

#SPJ11

The pH of the solution after adding 400.0 mL of 0.10 M KOH to a 100.0 mL sample of 0.20 M HF is 12.60, found by calculating the concentration of H₃O⁺ using stoichiometry and the HF equilibrium equation.

To solve this problem, we can use the concept of stoichiometry and the acid-base equilibrium equation of HF to determine the pH of the solution after the addition of KOH.

First, we can calculate the number of moles of HF in the initial 100.0 mL of 0.20 M HF solution:

n(HF) = (100.0 mL)(0.20 mol/L) = 0.020 mol

Since the stoichiometric ratio between HF and KOH in the neutralization reaction is 1:1, we know that when 0.040 mol of KOH is added to the solution (400.0 mL of 0.10 M KOH), all of the HF will react with the KOH. This means that the remaining KOH in solution after the reaction is 0.040 mol.

Now, we can use the HF equilibrium equation to determine the concentration of HF after the reaction with KOH:

HF + H₂O <-> H₃O⁺ + F⁻

Ka = [H₃O⁺][F⁻] / [HF]

Since we know the initial concentration of HF and the amount of KOH added, we can calculate the new concentration of HF after the reaction using stoichiometry:

n(HF) = 0.020 mol - 0.040 mol = -0.020 mol

Since the amount of KOH added is twice the amount of HF present initially, we can assume that all the HF has reacted with the KOH, leaving us with 0.040 mol of excess KOH. The number of moles of F⁻ produced from the reaction can be calculated as 0.040 mol (since HF and KOH react in a 1:1 stoichiometric ratio), and we can use this to calculate the concentration of F-:

[F⁻] = n(F⁻) / V = 0.040 mol / (100.0 mL + 400.0 mL) = 0.080 M

Now, we can substitute the concentrations of HF and F- into the equilibrium equation for HF and solve for the concentration of H₃O⁺:

Ka = [H₃O⁺][F⁻] / [HF]

[H₃O⁺] = Ka x [HF] / [F-] = (3.5 x [tex]10^-^4[/tex]) x (0.020 mol / 0.080 M) = 8.75 x [tex]10^-^5[/tex] M

Finally, we can use the pH formula to calculate the pH of the solution:

pH = -log[H₃O⁺] = -log(8.75 x [tex]10^-^5[/tex]) = 12.60

Therefore, the pH of the solution after the addition of 400.0 mL of 0.10 M KOH is 12.60.

An ICE table can be used to solve acid-base equilibrium problems, but in this case, since all of the HF reacts with KOH, we can use stoichiometry to determine the new concentration of HF and the excess KOH remaining in solution after the reaction. We subtract the amount of KOH added (0.040 mol) from the amount of HF initially present (0.020 mol) to determine the new concentration of HF.

Learn more about Stoichiometry

brainly.com/question/28780091

#SPJ11

The mass of CO₂ in a 500 milliliter container of soda assuming that the drink is just CO₂ and water is approximately 0.726 grams.

To calculate the mass of CO₂ in a 500 milliliter container of soda, we need to know the concentration of CO₂ in the drink. However, in the absence of other data, we can make an assumption that the drink is just CO₂ and water.
The solubility of CO₂ in water is dependent on temperature and pressure. At standard atmospheric pressure (1 atm) and room temperature (25°C), the solubility of CO₂2 in water is approximately 0.033 moles per liter.
To convert milliliters to liters, we need to divide 500 by 1000, which gives us 0.5 liters. Therefore, the amount of CO₂ that can dissolve in 0.5 liters of water is:

0.033 moles/L * 0.5 L = 0.0165 moles

The molar mass of CO₂ is 44.01 g/mol, so the mass of CO₂ in 0.0165 moles of CO₂ is:
0.0165 moles * 44.01 g/mol = 0.726 g

Therefore, the mass of CO₂ is approximately 0.726 grams.

Learn more about concentration at https://brainly.com/question/26255204

#SPJ11

One major disadvantage of an online survey is the potential for low response rates, as people might ignore or not complete the survey, leading to a smaller and possibly less representative sample of the target population.

One major disadvantage of an online survey is that it may not accurately represent the opinions and experiences of those who do not have access to the internet or are not comfortable using technology. This can lead to a skewed or incomplete understanding of the target population.

A  survey methoAd is a procedure, instrument, or technique you might use to interview a predetermined group of people in order to collect data for your project. Typically, it makes it easier for participants in the research to communicate with the individual or group conducting the study.

Depending on the type of study you're conducting and the kind of data you ultimately want to collect, survey methodologies might be either qualitative or quantitative.

Visit here to learn more about survey  : brainly.com/question/13192080
#SPJ11

Trans-2-butene has the lowest melting point. Out of cis-2-butene and trans-2-butene, trans-2-butene has the lowest melting point.

The temperature at which a pure substance's solid and liquid states can coexist in equilibrium is known as the melting point. A solid's temperature will rise as heat is applied to it until the melting point is reached. The solid will then turn into a liquid with further heating without changing temperature.

Additional heat will raise the temperature of the liquid once all of the solid has melted. It is possible to recognise pure compounds and elements by their characteristic melting temperature, which is a characteristic number. Over a wide range of temperatures, the majority of mixtures and amorphous solids melt.

Visit here to learn more about melting point  : https://brainly.com/question/11024585
#SPJ11

The original molarity of the weak acid solution is approximately 2.87 × 10^(-5) M.

To find the original molarity of the weak acid solution with a Ka of 3.5 × 10^(-5) and a pH of 5.34 at 25°C. Follow these steps:

Step 1: Calculate the hydrogen ion concentration [H+] from the pH
pH = -log[H+]
5.34 = -log[H+]
[H+] = 10^(-5.34)

Step 2: Set up the Ka expression for the weak acid
Ka = [H+]² / ([HA]₀ - [H+]), where [HA]₀ is the original molarity of the weak acid

Step 3: Substitute the given Ka value and the calculated [H+] into the expression
3.5 × 10^(-5) = (10^(-5.34))^2 / ([HA]₀ - 10^(-5.34))

Step 4: Solve for the original molarity [HA]₀
3.5 × 10^(-5) = 10^(-10.68) / ([HA]₀ - 10^(-5.34))
[HA]₀ = 10^(-10.68) / (3.5 × 10^(-5)) + 10^(-5.34)

Step 5: Calculate [HA]₀
[HA]₀ ≈ 2.87 × 10^(-5) M

To know more about molarity refer to

https://brainly.com/question/30404105

#SPJ11

The balanced equation is[tex]3Al(s) + 4NO_3−(aq) + 9OH−(aq) + 6H_2O(l) → 3Al(OH)_4−(aq) + 4NH_3(g)[/tex]

The reactants and products are placed on the left and right sides of the arrow, respectively, to create a balanced equation. Coefficients, which appear as a number before a chemical formula, represent moles of a substance. The number of atoms in a single molecule is indicated by the subscripts (numbers below an atom).

Consider the straightforward chemical reaction Ca + Cl2 CaCl2, for instance. Because both sides of the equation have an equal amount of Ca and Cl atoms, the equation is already balanced. Changing the coefficients—numbers put in front of reactants or products to multiply them—will balance an equation.

to know more about balanced equations here:

brainly.com/question/7181548

#SPJ1

40k decays by positron emission. To balance the nuclear equation, we'll identify the mass number, atomic number, and element symbol for the missing species.

know more about positron emission here: https://brainly.com/question/16398568

#SPJ11

The coefficients in front of NO₃⁻(aq) and Mg(s) when the given redox equation is balanced in an acidic solution are 2 and 1, respectively.

To balance the redox equation in an acidic solution, we need to first determine the half-reactions and balance them separately. Then, we'll combine the balanced half-reactions.

Oxidation half-reaction (Mg to Mg²⁺):
Mg(s) → Mg²⁺(aq) + 2e-

Reduction half-reaction (NO₃⁻ to NO):
2H⁺(aq) + NO₃⁻(aq) + e- → NO(g) + H₂O(l)

Now, to balance the electrons, we multiply the oxidation half-reaction by 1 and the reduction half-reaction by 2:

Oxidation: Mg(s) → Mg²⁺(aq) + 2e-

Reduction: 4H⁺(aq) + 2NO₃⁻(aq) + 2e- → 2NO(g) + 2H₂O(l)

Combining the balanced half-reactions, we get:

Mg(s) + 4H⁺(aq) + 2NO₃⁻(aq) → Mg²⁺(aq) + 2NO(g) + 2H₂O(l)

So, the coefficients in front of NO₃⁻(aq) and Mg(s) are 2 and 1, respectively.

Learn more about redox equation here: https://brainly.com/question/27907895

#SPJ11

The coefficients in front of NO₃⁻(aq) and Mg(s) when the given redox equation is balanced in an acidic solution are 2 and 1, respectively.

To balance the redox equation in an acidic solution, we need to first determine the half-reactions and balance them separately. Then, we'll combine the balanced half-reactions.

Oxidation half-reaction (Mg to Mg²⁺):
Mg(s) → Mg²⁺(aq) + 2e-

Reduction half-reaction (NO₃⁻ to NO):
2H⁺(aq) + NO₃⁻(aq) + e- → NO(g) + H₂O(l)

Now, to balance the electrons, we multiply the oxidation half-reaction by 1 and the reduction half-reaction by 2:

Oxidation: Mg(s) → Mg²⁺(aq) + 2e-

Reduction: 4H⁺(aq) + 2NO₃⁻(aq) + 2e- → 2NO(g) + 2H₂O(l)

Combining the balanced half-reactions, we get:

Mg(s) + 4H⁺(aq) + 2NO₃⁻(aq) → Mg²⁺(aq) + 2NO(g) + 2H₂O(l)

So, the coefficients in front of NO₃⁻(aq) and Mg(s) are 2 and 1, respectively.

Learn more about redox equation here: https://brainly.com/question/27907895

#SPJ11

The atomic ratio of indium-112 to indium-115 in naturally occurring indium is approximately 4:1.
The atomic number of indium is 49, which means it has 49 protons. Its atomic mass is 114.8 g/mol. Naturally occurring indium contains a mixture of indium-112 (112In) and indium-115 (115In). The atomic ratio of these isotopes in indium can be approximated as follows:

(Atomic mass - mass of 112In) / (mass of 115In - mass of 112In) = (114.8 - 112) / (115 - 112) = 2.8 / 3 ≈ 0.93

Therefore, the atomic ratio of indium-112 to indium-115 in naturally occurring indium is approximately 0.93:1.

The atomic number of an element is the number of protons in the nucleus of an atom of that element. It is a unique identifier for each element on the periodic table, and it determines the element's chemical properties. For example, all carbon atoms have six protons in their nucleus, so the atomic number of carbon is 6. The atomic number is typically represented by the symbol Z.

Visit here to learn more about atomic ratio brainly.com/question/19327306

#SPJ11

After 10.0 days, approximately [tex]2.63 * 10^8[/tex] radon atoms are left in the sample.

The formula for determining the amount of radioactive material left after a specified period of time is given as follows: Radon-222 decays according to an exponential decay model.

[tex]N(t) = N_o * (1/2)^(^t^/ T^_1_/_2)[/tex]

Where:

N(t) is the remaining amount of the substance at time t

N₀ is the initial amount of the substance

T₁/₂ is the half-life of the substance

t is the elapsed time

Given:

N₀ = [tex]6.00 * 10^8[/tex] radon atoms

T₁/₂ = 3.83 d

t = 10.0 d

When we put the values we get:

N(10) =[tex](6.00 * 10^8) * (1/2)^(^1^0^/^ 3^.^8^3^)[/tex]

N(10) ≈ [tex]2.63 * 10^8[/tex] radon atoms

Hence, after 10.0 days, approximately [tex]2.63 * 10^8[/tex] radon atoms are left in the sample.

Learn more about Radioactive materials, here:

https://brainly.com/question/3274297

#SPJ12

The solubility of silver iodide in molar form is 1.2 108 M.

Silver iodide dissolves in water at a rate of 9.1 109 M, or mol/L. This indicates that silver iodide doesn't dissociate very much, according to a physical interpretation. Ksp is constant for a saturated solution of a particular substance at a given temperature (van't Hoff equation).

Ksp = [Silver ion][Iodine ion]

Let x represent Silver Iodide's molar solubility.

At equilibrium, the concentration of Silver ion ions and Iodine ion ions will both be x.

Therefore, we can write:

Ksp = x²

Solving for x, we get:

x = √(Ksp) = √(1.5 × 10⁻¹⁶) = 1.2 × 10⁻⁸ M

To know more about solubility visit:-

https://brainly.com/question/28170449

#SPJ1

Answer:

P1V1/P2

=200×4.50/760

=1.1842

a. Molecular equation: CoCl₃(aq) + 6KCN(aq) → K₃[Co(CN)₆](aq) + 3KCl(aq)

   Net-ionic  equation: Co₃+(aq) + 6CN-(aq) → [Co(CN)₆]³⁻(aq)

b. Molecular equation: NiF₂(s) + 4NaF(aq) → Na₄[NiF₄](aq) + 2Na⁺(aq)
   Net-ionic equation: Ni²⁺(aq) + 4F⁻(aq) → [NiF₄]²⁻(aq)

c. Molecular equation: Al(NO₃)₃(s) + 6NaBr(aq) → Na₃[AlBr₆](aq) + 3NaNO₃(aq)
   Net-ionic equation: Al³⁺(aq) + 6Br⁻(aq) → [AlBr₆]³⁻(aq)

a. Aqueous cobalt(III) chloride reacts with aqueous potassium cyanide to form a soluble complex ion between cobalt(III) and cyanide, with a coordination number of six.

Molecular:
CoCl₃(aq) + 6KCN(aq) → K₃[Co(CN)₆](aq) + 3KCl(aq)

Net-ionic:
Co₃+(aq) + 6CN-(aq) → [Co(CN)₆]³⁻(aq)

b. Solid nickel(II) fluoride is dissolved in the presence of aqueous sodium fluoride by forming a soluble complex ion between nickel(II) and fluoride ion, with a coordination number of four.

Molecular:
NiF₂(s) + 4NaF(aq) → Na₄[NiF₄](aq) + 2Na⁺(aq)

Net-ionic:
Ni²⁺(aq) + 4F⁻(aq) → [NiF₄]²⁻(aq)

c. Solid aluminum nitrate reacts with aqueous sodium bromide to form a soluble complex ion between aluminum ion and bromide ion, with a coordination number of six.

Molecular:
Al(NO₃)₃(s) + 6NaBr(aq) → Na₃[AlBr₆](aq) + 3NaNO₃(aq)

Net-ionic:
Al³⁺(aq) + 6Br⁻(aq) → [AlBr₆]³⁻(aq)

Learn more about coordination numbers at https://brainly.com/question/12498196

#SPJ11

The correct answer is B.Use partial charges to indicate the bond polarity of each bond B-F > C-F > N-F δ+δ- δ+δ- δ+δ-

The ionic character of a bond is determined by the electronegativity difference between the two atoms involved. A larger electronegativity difference results in a more ionic bond. In this case, we are comparing B-F, C-F, and N-F bonds.

The electronegativities of the elements are as follows:
Boron (B) = 2.04
Carbon (C) = 2.55
Nitrogen (N) = 3.04
Fluorine (F) = 3.98

Electronegativity differences:
B-F = 3.98 - 2.04 = 1.94
C-F = 3.98 - 2.55 = 1.43
N-F = 3.98 - 3.04 = 0.94

Since a higher electronegativity difference correlates with a more ionic bond, the order is B-F > C-F > N-F, and the partial charges are δ+δ- for each bond.

Learn more about bond here:

https://brainly.com/question/29667007

#SPJ11

In this procedure, the production of sulfuric acid (H2SO4) is around 81.82%.

I'd be happy to help you calculate the percent yield of sulfuric acid (H2SO4) in this case. To calculate the percent yield, you'll need the actual yield and the theoretical yield. Here's a step-by-step explanation:

1. Identify the theoretical yield: In this case, the theoretical yield is given as 3.3 kg.
2. Identify the actual yield: The actual yield is given as 2.7 kg.
3. Use the formula for percent yield: Percent yield = (Actual yield / Theoretical yield) x 100
4. Plug in the values: Percent yield = (2.7 kg / 3.3 kg) x 100
5. Calculate the result: Percent yield = 81.82%

So, the percent yield of the sulfuric acid (H2SO4) in this process is approximately 81.82%.

For more such questions on sulfuric acid , click on:

https://brainly.com/question/10220770

#SPJ11

Answer: Polar Covalent bonds is an unequal sharing of electrons and Non-Polar Covalent Bonds are an equal sharing of electrons.

Explanation: In polar covalent bonds, we can have partial charges, meaning one element is slightly more negative/positive than the other. Non-polar covalent bongs is when there is no partial charges and usually occur between the same elements. For example Cl-Cl bonds.

With the aid of an ice table and the acid dissociation constant of nitrogen acid, the pH of a solution containing 0.145 M nitrogen acid and 0.175 M sodium nitrite may be determined. The outcome is roughly 3.17.

The acidity, alkalinity, and neutrality of a solution can all be determined using the pH scale. At 25 °C, a solution with a pH of 7 or less is acidic, one with a pH of 7 or more is neutral, and one with a pH of 7 or more is alkaline.

The pH neutrality relies on temperature, falling below 7 if the temperature rises above 25 °C. The pH value is not limited to zero.

To know more about nitrogen acid  visit:-

https://brainly.com/question/29269334

#SPJ1

The calculated pH is : 3.367

[HCOONa] = mass/(molar mass * volume)

= 0.65/(68.01 * 0.045)

=0.212 M

[HCOOH] = 0.50 M

Ka = 1.8*10⁻⁴

pKa = -log Ka

= -log (1.8*10⁻⁴)

= 3.74

use:

pH = pKa + log {[conjugate base]/[acid]}

= 3.740+ log {0.212/0.500}

=3.367

hence, when 0.65 g of HCOONa (fw = 68.01 g/mol) is added to 45 ml of 0.50 m formic acid, HCOOH (fw = 46.03 g/mol) the pH is 3.367.

To know more about pH here:

https://brainly.com/question/2288405#

#SPJ11

The type of Isomerism shown by  [Co(NH3)5NO2]Cl 2 is Linkage Isomerism.

The structural isomer of [Co(NH3)5NO2]Cl2 is [Co(NH3)5ONO]Cl2.

The isomerism exhibited between the two compounds [Co(NH3)5NO2]Cl2 and [Co(NH3)5ONO]Cl2 is called linkage isomerism. In these isomers, the ligand NO2 is bound to the central metal atom (cobalt) through different atoms (nitrogen in the first compound and oxygen in the second compound). This difference in the binding site causes the compounds to have different physical and chemical properties. Linkage isomerism is a type of coordination isomerism that arises due to the reversible coordination of a ligand to a metal center through different atoms or groups. This type of isomerism is often observed in coordination complexes containing ambidentate ligands.

Know more about Isomers here:

https://brainly.com/question/28295730

#SPJ11

In an oxidation-reduction experiment, it is important to observe the reaction after 30 minutes because the reaction requires time to complete.

During this time, the solution and solid may look different than when the reaction begins, and silver may continue to precipitate for 30 minutes.

By observing the reaction after 30 minutes, we can ensure that the reaction has completed and that we have accurate results.

It also allows us to analyze the full extent of the reaction and make any necessary adjustments or observations. Therefore, it is crucial to wait the full 30 minutes before analyzing the results of an oxidation-reduction experiment.

learn more about experiment here:brainly.com/question/30055326

#SPJ11