Cost of Normal Spoilage
Frieling Company installs granite countertops in customers' homes. First, the customer chooses the particular granite slab, and then Frieling measures the countertop area at the customer's home, cuts the granite to that shape, and installs it. The Tramel job calls for direct materials of $1,900 and direct labor of $500. Overhead is applied at the rate of 140 percent of direct labor cost. Unfortunately, one small countertop breaks during installation and Frieling must cut another piece and install it to properly complete the job. The additional rework required direct materials costing $400 and direct labor costing $100. Assume that the spoilage was due to carelessness by a Frieling worker and it is considered to be normal spoilage.
Required:
1. Calculate the cost of the Tramel job.
2. Make any needed journal entry to the overhead control account.
3. What if the additional rework required $200 of direct labor? What would be the effect on the cost of the Tramel job?

Answer:

See below

Explanation:

1. Cost of the Tramel Job

= Direct material cost + Direct labor cost + Overhead applied

= $1,900 + $500 + (140% × $500)

= $1,900 + $500 + $700

= $3,100

2. Journal entry to record the overhead cost

Overhead cost account Dr $500

To Material account Cr $400

To Labor account Cr $100

3. Effect of additional rework required $200 of direct labor on the cost of Tramel job

= Direct material cost + Direct labor cost + Overhead applied

= $1,900 + ($500 + $200) + (140% × $500)

= $1,900 + $700 + $700

= $3,300

The effect of additional rework required of $200 of direct labor cost is an increase of $200 on the cost of job for Tramel

Elaine needs $1,500 to buy textbooks and other school supplies. Kramer agrees to loan Elaine $1,500, accepting as collateral Elaine’s car. They put their agreement in writing and sign it. Elaine keeps possession of the car. What are the requirements for Kramer to have an enforceable security interest in the car? What must Kramer do to let other creditors know of his security interest in the car?

The objectives of labor unions frequently shift with social and economic trends. In the 1970s, the primary objective was additional pay and benefits for members. In the 1980s, job security and union recognition were uppermost. In the 1990s and into the 2000s, unions again focused on job security due to the growth of global competition and outsourcing. Organized labor has also strongly opposed the increase in offshore outsourcing, claiming this practice will cost U.S. jobs. Labor unions generally insist that a contract contain a union security clause stipulating that employees who reap union benefits either officially join or at least pay dues to the union. Edward was recently transferred to a location in a new state. He was surprised that he was not required to be in the union in the new state, but he was in the old state. He later learned that the new state passed a provision giving him the choice.

a. Open shop agreement
b. Union shop agreement
c. Agency shop agreement & Right-to-work law

g Comfi Airways, Inc., a small two-plane passenger airline, has asked for your assistance in some basic analysis of its operations. Both planes seat 10 passengers each, and they fly commuters from Comfi’s base airport to the major city in the state, Metropolis. Each month, 40 round-trip flights are made. Shown below is a recent month’s activity in the form of a cost-volume-profit income statement. Fare revenues (400 passenger flights) $48,000 Variable costs Fuel $16,960 Snacks and drinks 720 Landing fees 2,100 Supplies and forms 1,100 20,880 Contribution margin 27,120 Fixed costs Depreciation 3,100 Salaries 11,600 Advertising 600 Airport hanger fees 1,650 16,950 Net income $10,170 Calculate the break-even point in dollars. Break-even point $Type your answer here eTextbook and MediaAssistance Used Calculate the break-even point in number of passenger flights. Break-even point Type your answer here flights eTextbook and MediaAssistance Used Without calculations, determine the contribution margin at the break-even point. Break-even point $Type your answer here eTextbook and MediaAssistance Used If ticket prices were decreased by 10%, passenger flights would increase by 25%. However, total variable costs would increase by the same percentage as passenger flights. (1) How much would net income be impacted by this change? Net income to $ (2) Should the ticket price decrease be adopted?

Citibank need to borrow $1 million for 6 months starting in 2 years. Citibank is concerned about the interest rate would like to lock in the interest rate it pays by going long an FRA with Bank of America. The FRA specifies that Citibank will borrow at a fixed rate of 0.04 for 6 months on $1 million in 2 years. If the 6 months LIBOR rate proves to be 0.01. Then to settle the FRA, what is the cash flow to Citibank at the end of 2 years

Exercise 17-09 a-b (Video) (Part Level Submission) Oriole, Inc. manufactures two products: missile range instruments and space pressure gauges. During April, 50 range instruments and 200 pressure gauges were produced, and overhead costs of $88,010 were estimated. An analysis of estimated overhead costs reveals the following activities. Activities Cost Drivers Total Cost 1. Materials handling Number of requisitions $37,080 2. Machine setups Number of setups 28,710 3. Quality inspections Number of inspections 22,220 $88,010 The cost driver volume for each product was as follows. Cost Drivers Instruments Gauges Total Number of requisitions 390 640 1,030 Number of setups 200 295 495 Number of inspections 240 265 505 Collapse question part (a) Determine the overhead rate for each activity

The company owns 9,000 acres of timberland purchased two years ago at a cost of $1,400 per acre. At the time of purchase, the land without the timber was valued at $400 per acre. In the current year, the company built fire lanes and roads, with a life of 30 years, at a cost of $84,000. Every year, the company sprays to prevent disease at a cost of $3,000 per year and spends $7,000 to maintain the fire lanes and roads. During the current year, the company selectively logged and sold 700,000 board feet of timber, of the estimated 3,500,000 board feet. Next year, the company will plant new seedlings to replace the trees cut at a cost of $100,000. What is the cost of timber sold related to depletion during the current year

Danner Company expects to have a cash balance of $52,965 on January 1, 2017. Relevant monthly budget data for the first 2 months of 2017 are as follows. Collections from customers: January $100,045, February $176,550. Payments for direct materials: January $58,850, February $88,275. Direct labor: January $35,310, February $52,965. Wages are paid in the month they are incurred. Manufacturing overhead: January $24,717, February $29,425. These costs include depreciation of $1,765 per month. All other overhead costs are paid as incurred. Selling and administrative expenses: January $17,655, February $23,540. These costs are exclusive of depreciation. They are paid as incurred. Sales of marketable securities in January are expected to realize $14,124 in cash. Danner Company has a line of credit at a local bank that enables it to borrow up to $29,425. The company wants to maintain a minimum monthly cash balance of $23,540.
Prepare a cash budget for January and February.

The Northern Ring Company manufactures 2,000 telephones per year. The full manufacturing costs per telephone are as follows: Direct materials $ 2 Direct labor 8 Variable manufacturing overhead 6 Average fixed manufacturing overhead 6 Total $22 The Texas Ring Company has offered to sell Northern Ring Company 2,000 telephones for $15 per unit. If Northern Ring Company accepts the offer, $10,000 of fixed overhead will be eliminated. Northern Ring should: Select one: A. Buy the telephones; the savings is $12,000 B. Make the telephones; the savings is $2,000 C. Buy the telephones; the savings is $24,000 D. Make the telephones; the savings is $12,000

Which of the following situations would be a wrongful dissociation of a partner in a partnership? Multiple Choice Expulsion of a partner in accordance with the partnership agreement. Expulsion of a partner by a court at the request of the partnership. Expulsion of a partner who has transferred his transferable partnership interest. Expulsion of a partner with whom it is unlawful for the partnership to carry on its business.

Sound Tek Inc. manufactures electronic stereo equipment. The manufacturing process includes printed circuit (PC) board assembly, final assembly, testing, and shipping. In the PC board assembly operation, a number of individuals are responsible for assembling electronic components into printed circuit boards. Each operator is responsible for soldering components according to a given set of instructions. Operators work on batches of 50 printed circuit boards. Each board requires 4 minutes of board assembly time. After each batch is completed, the operator moves the assembled boards to the final assembly area. This move takes 12 minutes to complete. The final assembly for each stereo unit requires 20 minutes and is also done in batches of 50 units. A batch of 50 stereos is moved into the test building, which is across the street. The move takes 20 minutes. Before conducting the test, the test equipment must be set up for the particular stereo model. The test setup requires 30 minutes. The units wait while the setup is performed. In the final test, the 50-unit batch is tested one at a time. Each test requires 9 minutes. The completed batch, after all testing, is sent to shipping for packaging and final shipment to customers. A complete batch of 50 units is sent from testing to shipping. The Shipping Department is located next to testing. Thus, there is no move time between these two operations. Packaging and labeling requires 12 minutes per unit.

Required:
Determine the amount of value-added and non-value-added lead time and the value-added ratio in this process for an average stereo unit in a batch of 45 units.

Walmart and Target are the only stores in a remote town that currently stock and sell the PlayStation 5 video game console. Managers at both stores are simultaneously deciding whether to charge a price of $1,000 or $1,500 for each console. If both stores charge $1,000, they earn a profit of $100,000 each. If both stores charge $1,500, they earn a profit of $200,000 each. If one store charges $1,000 and the other store charges $1,500, the store that charges $1,000 earns a profit of $250,000 and the firm that charges $1,500 earns a profit of $50,000. If Walmart and Target ________, they can both charge $1,500 and earn the highest combined profit available.

Penetration pricing doesn't work if ________.

Gelb Company currently manufactures 47,000 units per year of a key component for its manufacturing process. Variable costs are $6.25 per unit, fixed costs related to making this component are $85,000 per year, and allocated fixed costs are $84,500 per year. The allocated fixed costs are unavoidable whether the company makes or buys this component. The company is considering buying this component from a supplier for $3.70 per unit. Calculate the total incremental cost of making 47,000 units and buying 47,000 units. Should it continue to manufacture the component, or should it buy this component from the outside supplier

Task 1 . The income (in thousand $) of 5 small companies labeled AA , BB , CC , DD , EE has been calculated and the results are as follo,;vs:

2.49j 2.39j 2.39, 1.79, 3.8 .
1. Put the obtained data as points on the following coordinate system.


Income value


3

2

1


AA BB CC DD EE Company

2. Calculate the mean value from the sample for these data:


On the chart draw a line y = x (a horizontal line at the level of the mean of the sample) and for every measurement mark the difference between the value of the measurement and the sample mean.
3. Calculate the samples variance, standard deviation and the estimator of variance:

Icr2 =_.!_ f=_(xi -

I• I

__ n i=l

x_) _= iT





4. Write proper values into the following tagged fields and interpret the results obtained:

CJ CJ
x - 20- x - a x+ a x+ 20-

Date of simulation : 2021 03 02 20:30:20.050 Seed: 20302 8071 .




8

Modified Accelerated Cost Recovery System (MACRS) (LO 7.4) Mike purchases a new heavy-duty truck (5-year class recovery property) for his delivery service on April 30, 2017. No other assets were purchased during the year. The truck is not considered a passenger automobile for purposes of the listed property and luxury automobile limitations. The truck has a depreciable basis of $39,000 and an estimated useful life of 5 years. Assume half-year convention for tax. .
a. Calculate the amount of depreciation for 2017 using financial accounting straight-line depreciation (not the straight-line MACRS election) over the truck's estimated useful life.
b. Calculate the amount of depreciation for 2017 using the straight-line depreciation election, using MACRS tables over the minimum number of years with no bonus depreciation or election to expense
c.Calculate the amount of depreciation for 2017, including bonus depreciation but no election to expense, that Mike could deduct using the MACRS tables
d. Assume no income limit on the expense election. Calculate the amount of depreciation for 2017 including bonus depreciation and the election to expense that Mike can deduct.

The net income reported on the income statement of Whispering Winds Corp. for the current year was $1251000. Depreciation recorded on plant assets was $236000. Accounts receivable and inventories increased by $66000 and $44000, respectively. Prepaid expenses and accounts payable decreased by $6000 and $61000, respectively. How much cash was provided by operating activities during the year

Wexpro, Inc., produces several products from processing 1 ton of clypton, a rare mineral. Material and processing costs total $71,000 per ton, one-fourth of which is allocated to product X15. Six thousand five hundred units of product X15 are produced from each ton of clypton. The units can either be sold at the split-off point for $17 each, or processed further at a total cost of $8,800 and then sold for $22 each. Required: 1. What is the financial advantage (disadvantage) of further processing product X15

Sparkle Metallurgy, Inc. has two service departments (Human Resources and Building Maintenance) and two production departments (Machining and Assembly). The company allocates Building Maintenance cost on the basis of square footage and Human Resources cost on the basis of employees. It believes that Building Maintenance provides more service than Human Resources. The square footage and employees in each department follow. Square Footage Employees Human Resources 4,000 10 Building Maintenance 10,000 15 Machining 15,000 40 Assembly 21,000 60 Assuming use of the step-down method, which of the following choices correctly denotes the number of square feet and employees over which the Building Maintenance cost and Human Resources cost would be allocated (i.e., spread)?
a. 19,000.
b. 44,000.
c. 50,000.
d. 63,000.

Communication starts with
​

. Bartholomew Corp's master budget calls for the production of 6,000 units of products monthly. The master budget includes indirect labor of $396,000 annually; Bartholomew considers indirect labor to be a variable cost. During the month of September, 5,600 units of product were produced, and indirect labor costs of $30,970 were incurred. A performance report utilizing flexible budgeting would report a flexible budget variance for indirect labor of:

XYZ Office Supplies is about to introduce a new customer service program that will affect all its 355 sales and service employees. Job duties will be changed, and the employee rewards system will be altered to fit this new customer focus. Moreover, the company wants to improve the efficiency of work processes, thereby removing some of the comfortable (and often leisurely) routines that employees have followed over the years. Top management is concerned about the different types of forces resisting change that the company will potentially experience during this change process. The employees at XYZ discreetly weaken the new customer service program to prove that the decision is wrong and that the new program is not effective. Which of the following reasons to resist change is depicted in this scenario?
a. induce organizational learning.
b. negotiate with the employees.
c. use the stress management technique.
d. create an urgency for change.

LJM Corporation includes two divisions, Shay Division and Patty Division. The Shay Division makes specialized filters, including one that could be used by the Patty Division. Costs for the filter are variable costs, $16; fixed costs, $20. Shay Division has capacity to make 20,000 of the filters, and it is operating at capacity. It sells the filters to other companies for $52 each. The Patty Division needs 8,000 filters per year, and it has been purchasing them from another company for $45 each. Required: 1) If a transfer were to occur between Shay Division and Patty Division, what is the maximum that Patty Division should be willing to pay for the filters? 2) If a transfer were to occur between Shay Division and Patty Division, what is the minimum price that Shay Division should be willing to accept?

Which of the following best describes the type of loss covered by the Spoilage Damage insuring agreement of the ISO Equipment Breakdown Protection Coverage Form? A. The spoilage of perishable goods resulting from breakdown of covered equipment. B. Costs to replace food labels resulting from breakdown of refrigeration equipment.

George is responsible for examining the heating and air conditioning system of an upcoming hotel. So, George is a mechanical____

The Laramie Factory produces expensive boots. It has two departments, tanning and finishing departments, that process all the items. During January, the beginning work in process in the tanning department was 40% complete as to conversion and 100% complete as to direct materials. The beginning inventory included $6,000 for materials and $18,000 for conversion costs. Ending work-in-process inventory in the tanning department was 40% complete. Direct materials are added at the beginning of the process. Beginning work in process in the finishing department was 60% complete as to conversion. Beginning inventories included $7,000 for transferred-in costs and $11,000 for conversion costs. Ending inventory was 30% complete. Additional information about the two departments follows: Tanning Finishing Beginning work-in-process units 5,000 4,000 Units started this period 14,000 Units transferred out this period 16,000 18,000 Ending work-in-process units 2,000 Material costs added $18,000 Conversion costs $32,000 $18,630 Transferred-out cost $50,400 Required: Complete the production cost worksheet below using FIFO costing for the finishing department.

Is gender pay gap logical ? If so, kindly explain.
Thanks.

The stockholders’ equity section of Velcro World is presented here.
VELCRO WORLD
Balance Sheet (partial)
($ and shares in thousands)
Stockholders' equity:
Preferred stock, $1 par value $ 5,800
Common stock, $1 par value 28,000
Additional paid-in capital 1,028,600
Total paid-in capital 1,062,400
Retained earnings 286,000
Treasury stock, 12,000
Common shares (360,000)
Total stockholders' equity $ 988,400
Based on the stockholders' equity section of Velcro World, answer the following questions. Remember that all amounts are presented in thousands.
1. How many shares of preferred stock have been issued? (Enter you answer in total number of shares, not in thousands.)
2. How many shares of common stock have been issued? (Enter you answer in total number of shares, not in thousands.)
3. If the common shares were issued at $30 per share, at what average price per share were the preferred shares issued?
4. If retained earnings at the beginning of the period was $250 million and $30 million was paid in dividends during the year, what was the net income for the year? (Enter your answer in million (i.e., 5,000,000 should be entered as 5).)
5. What was the average cost per share of the treasury stock acquired?

Teal Mountain Inc. issues $5.0 million, 10-year, 8% bonds at 101, with interest payable on January 1. The straight-line method is used to amortize bond premium. (a)Prepare the journal entry to record interest expense and bond premium amortization on December 31, 2022, assuming no previous accrual of interest. (Credit account titles are automatically indented when amount is entered. Do not indent manually.)

Cedric Company recently traded in an older model computer for a new model. The old model's book value was $140,000 (original cost of $370,000 less $230,000 in accumulated depreciation) and its fair value was $210,000. Cedric paid $65,000 to complete the exchange, which has commercial substance.
Calculate the following values:
1. Amount to debit for new equipment
2. Amount to debit accumulated depreciation
3. Amount to credit to cash
4. Amount to credit for old equipment
5. Gain or loss on sale

A major equipment purchase is being considered Metro Atlanta. The initial cost is determined to be $1,000,000. It is estimated that this new equipment will save $100,000 the first year and increase gradually by $50,000 for the next 6 years. MARR= 10%.
A) The payback period for this equipment purchase is______
B) The B/C ratio for this investment is ________
C) The NFW of this investment is ________