If the cone of force is facing an observer, the impact comes from the opposite side of the observer.
What is Newton's third law of motion?
Newton's third law of motion states that action and reaction force are equal and opposite. That is for every action, there is an equal and opposite reaction.
Mathematically, the formula for Newton's third law of motion is given as;
Fa = - Fb
where;
Fa is the impact force or force exerted on BFb is the reaction force of B due to applied force of AThus, when a force is applied from a side, the observed force or reaction will be directed in opposite direction. The force exerted and the reaction force are both equal in magnitude but occurs in opposite direction.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
What are the coefficients in the equation for the magnetic field component of the wave after the period increases by a factor of 2.70
The coefficient of magnetic field was found to be Bmax, k = 1.53x10¹¹, 1.14x10⁴,3.43x10¹² T,1/m,rad/s.
Define magnetic field ?Moving charges, wave action, and magnetic materials all experience the magnetic influence of a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetization is applied to it when it moves through a magnetic field. A permanent magnet's magnetic field draws on ferromagnetic materials like iron and repels or attracts other magnets. The three additional magnetic effects of diamagnetism, electromagnetism, and biomagnetism also cause tiny forces to be exerted on "nonmagnetic" materials by a nonuniform magnetic field, although these forces are frequently so minute , they can only be detected using laboratory apparatus. Electric currents used in electromagnets and time-varying electric fields produce magnetic fields that surround magnetized objects.
Magnetic field maximum = 1.531011,
The wave number is 1.14104.
In teslas, the angular frequency is 3.431012 T.
meters-1 in reverse,
rad/s = radians per second
To learn more about Magnetic field follow the given link: brainly.com/question/25801845
#SPJ4
For which of the regions shown in the figure is the observed effect the strongest? O Region B O Region C
O The observed effect is the same for all three regions O Region A
D) Region A. The observed effect is strongest in Region A, as this region contains the most extreme temperatures and the most extreme change in temperature over time.
What is temperatures ?
Temperatures refer to the degree of hot or cold that something is. It is typically measured in either Celsius or Fahrenheit, with Celsius being the most common metric used.
Temperatures can range from extreme cold to extreme heat, with average temperatures ranging from -40 to 40 degrees Celsius. Temperatures can be affected by a number of factors, including altitude, latitude, and proximity to the ocean. Different climates can experience vastly different temperatures, making it important to know the temperature of a particular area before traveling.
To learn about more temperatures.
https://brainly.com/question/24746268
#SPJ4
If there exists a d such that ad = 0, d > 0, and cd > 0, then is the optimal objective value unbounded?
With an unbounded optimal solution, the feasible region essentially reaches infinity and even the optimal solution is not constrained by the constraints. Resolution.
This seems to be quite uncommon in real life. One or even more constraints may miss; verify the phrasing of the constraints.
The feasible zone effectively extends into infinity as well as the optimal solution is unbound, meaning the restrictions do not place any upper bounds on it. This is incredibly uncommon in real life. If there are any lacking constraints, kindly verify the formulation of both constraints.
Unbounded functions are those that are neither above nor below bounded by such a finite limit. For instance, because it ranges from to, x is an unbounded function. The unbounded function tax would be defined for any real x with the exception of x(2n+1)2.
To know more about unbounded
https://brainly.com/question/14659197
#SPJ4
Most of us know intuitively that in a head-on collision between a large dump truck and a subcompact car, you are better off being in the truck than in the car. Why is this? Many people imagine that the collision force exerted on the car is much greater than that exerted on the truck. To substantiate this view, they point out that the car is crushed, whereas the truck is only dented. This idea of unequal forces, of course, is false; Newton's third law tells us that both objects are acted upon by forces of the same magnitude. The truck suffers less damage because it is made of stronger metal. But what about the two drivers? Do they experience the same forces? To answer this question, suppose that each vehicle is initially moving at 6.60 m/s and that they undergo a perfectly inelastic head-on collision. Each driver has mass 75.0 kg. Including the masses of the drivers, the total masses of the vehicles are 800 kg for the car and 4,000 kg for the truck. If the collision time is 0.100 s, what force does the seat belt exert on each driver? (Enter the magnitude of the force.)
Answer:
According to Newton's third law, the force exerted on each driver during the collision is equal and opposite to the force exerted on their respective vehicles. We can use the principle of conservation of momentum to find the force experienced by each driver.
The initial momentum of the car and driver is the product of their mass and velocity: (800 kg)(6.60 m/s) = 5280 kgm/s. The initial momentum of the truck and driver is (4000 kg)(6.60 m/s) = 26400 kgm/s. After the collision, the final momentum of the combined system (the car, truck, and drivers) is 0, since the collision is perfectly inelastic and the two vehicles stick together. This means that the final momentum of the car and driver is equal and opposite to the final momentum of the truck and driver.
We can set up the following equation to solve for the force experienced by the car driver:
Force (car driver) = (final momentum of car and driver) / (collision time)
= (-final momentum of truck and driver) / (collision time)
= (-26400 kg*m/s) / (0.100 s)
= -26400 N
The negative sign indicates that the force is in the opposite direction of the initial momentum of the car and driver. The force experienced by the truck driver is equal in magnitude to the force experienced by the car driver, so the force experienced by the truck driver is also -26400 N.
Explanation:
What is the relationship between mass and kinetic energy evidence?
The equation for Kinetic Energy is: KE = 1/2 mv2. Kinetic energy has a direct relationship with mass, meaning that as mass increases so does the Kinetic Energy of an object.
In physics, an object's kinetic energy is the energy it has as a result of its motion. It is defined as the amount of work required to accelerate a body of a given mass from rest to a certain velocity.
The body retains its kinetic energy after gaining it during acceleration until its speed changes. The body does the same amount of work while slowing down from its current pace to rest. Formally, kinetic energy is any term in a system's Lagrangian that contains a time derivative.
Learn more about Kinetic Energy to visit this link
https://brainly.com/question/26472013
#SPJ4
A 2,000-kg elevator is being accelerated upward at a rate of 3.0 m/s2. What is the tension in the cable
According to the above statement, 15800 N of tension is required to draw a cable at 3.0 m/s² of acceleration.
What are potential and tension?A force known as tension is connected here to tugging of an item like the a rope, cord, or chain. It resembles elastic potential energy a lot. When a thing is pulled out and brought under tension, as soon as that force is removed, it will naturally recover to its relaxed length.
F = ma
= 2000 kg × 3.0 m/s²
= 6000 N.
The body's weight and the load are added to create the tension force.
Thus T = w + ma
T = 9800 N + 6000 N
= 15800 N.
As a result, 15800 N of tension is required to draw a wire at 3.0 m/s² of acceleration.
To know more about Tension visit:
https://brainly.com/question/24994188
#SPJ4
The complete question is-
A 2000 kg elevator is accelerated upward at a rate of 3.0 m/s2. What is the tension in the cable pulling the elevator upward when it experiences this acceleration?
The driver of a car traveling at 30.2 m/s applies the brakes and undergoes a constant deceleration of 1.4 m/s 2 . How many revolutions does each tire make before the car comes to a stop, assuming that the car does not skid and that the tires have radii of 0.37 m
The driver of a car traveling at 30.2 m/s applies the brakes and undergoes a constant deceleration of 1.4 m/s 2 . The car makes 139 revolutions.
A change in velocity that does not alter over time is referred to as a constant acceleration. A car's average acceleration stays constant at 20 mph per minute even if it increases its speed by 20 mph in one minute and another 20 mph the next.
Acceleration in the direction crosswise to the direction of the velocity is always referred to as deceleration. Deceleration always slows down motion. However, negative acceleration is just acceleration in the opposite direction according to the selected coordinate system.
Given:
v₀ = 30 m/s
v = 0 m/s
a = -1.4 m/s²
Find: Δx
v² = v₀² + 2aΔx
(0 m/s)
² = (30 m/s)
² + 2 (-1.4 m/s²) Δx
Δx = 321.43 m
The tires' circumference is 2 m plus 0.37 m, or 2.32 m. Therefore:
139 rev = 321.43 m (1 rev / 2.32 m)
To learn more about constant deceleration from given link
https://brainly.com/question/14442456
#SPJ4
A net force of 10 newtons accelerates an object at 5.0 meters per second^2. What net force would be required to accelerate the same object at 1.0 meters per second^2
The proper answer is that a force of 16 N net would be needed to accelerate the same item at 1.0 m/s2.
How is the net force needed to accelerate calculated?Newton's second law of motion condenses these relationships. The answer to the acceleration equation above can be written as Net Force = Mass Acceleration, or F = m a.
You know that force(F) & acceleration(a) are connected through mass(m),
F=ma
Here you have:
10 = 5 m
so, m = 10/5 = 2 Kg
Then if you have a = 8 m/s^2
you get:
F=2×8=16 N
Force = 16N
To know more about accelerate visit:
brainly.com/question/12550364
#SPJ4
What is the contribution of hydroelectric power in world electricity?
Hydroelectric power accounts for between 16 and 17 percent of global electricity production, making it one of the most significant renewable energy sources.
In 2016, hydropower contributed more than twice as much to the grid as the next largest renewable energy source, solar. Hydropower can provide many valuable services to the power grid beyond just energy generation. These include frequency regulation, voltage support, contingency reserves, load following, and black start service, all of which contribute to the reliability and safety of the power system. Hydropower's role in grid-scale energy storage, balancing services for other intermittent renewables like wind and solar power, and water management services by reservoirs are growing.
Want to know more about hydroelectric power visit the link which is given below;
https://brainly.com/question/15228003
#SPJ4
a 6 meter ladder is against a wall. if its bottom is pull at a constant of 0.5 m/sec, how fast is the ladder top sliding when it reaches 3 metersuo the wall
Hence, the ladder top to touch ground the ladder base should pull back a distance of ( 6 - 3 ) = 3 meters on ground As the rate of sliding of base of ladder is 0.5 meter per second , it takes a time of [ 3/ (0.5) ] = 6 seconds.
What is a simple definition of distance?What is Distance? Distance is the total movement of an object without any regard to direction. We can define distance as to how much ground an object has covered despite its starting or ending point.
How is a distance measured?Distance measures length. For example, the distance of a road is how long the road is. In the metric system of measurement, the most common units of distance are millimeters, centimeters, meters, and kilometers.
To know more about distance visit
https://brainly.com/question/13793384
#SPJ4
What magnitude of force, in newtons, must an 82.5-kg grouper exert to stay submerged in salt water (with density 1025 kg/m3) if its body density is 1015 kg/m3
The magnitude of force, must an 82.5-kg grouper exert to stay submerged in salt water is 8.12 N.
To find the magnitude of force that the grouper must exert to stay submerged, we can use the buoyancy force equation, which states that the buoyancy force is equal. The buoyancy force is equal to the weight of the fluid displaced, which is the density of the fluid multiplied by the volume of the fluid displaced and the gravitational acceleration. The volume of the fluid displaced is equal to the volume of the object and can be found using the equation of volume of an object. The weight of the object can be found by multiplying the mass of the object and the gravitational acceleration.
The net force on the object is the difference between the buoyancy force and the weight of the object.
= Fb
= V * (density of fluid - density of object) * g
= Fb
= (82.5 kg / (1015 kg/m3) ) * (1025 kg/m3 - 1015 kg/m3) * 9.8 m/s^2
= Fb
= 8.12 N
The magnitude of force that the grouper must exert to stay submerged is 8.12 N
To know more about force please refer: https://brainly.com/question/15076878
#SPJ4
Item 3 A 5kg object is released from rest near the surface of a planet such that its gravitational field is considered to be constant. The mass of the planet is unknown. After 2s, the object has fallen 30m. Air resistance is considered to be negligible. What is the gravitational force exerted on the 5kg object near the pl
So because acceleration of freely falling objects is constant, if a 5 kilogram object starts free falling at rest, its acceleration at 3 seconds is g=9.8 m/s2 or 32.2 ft/s2.
What happens to an object's weight as it travels through space away from a planet?As the gravitational pull of an object changes as it is moved further away from Earth or placed on another planet, so does the object's weight. Regardless of whether an object is on Planet, in deep space, or on the Moon, its mass will always be the same.
How can gravitational potential energy be used to determine weight?For the gravitational force the formula is P.E. = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 m / s2 at the surface of the earth) and h is the height in meters. Notice that gravitational potential energy has the same units as kinetic energy, kg m2 / s2.
TO know more about acceleration visit :
https://brainly.com/question/12550364
#SPJ4
Item 2 Sea stars, sea urchins, sand dollars, and brittle stars are all members of the same group. What is the common name of the group to which they all belong
Sea stars, brittle stars, as well as feather stars are a few examples of echinoderms. Despite their apparent differences, echinoderms share two key identifying traits that make them all identifiable.
What is the reputation of echinoderms?Echinoderms are effective scavengers of decomposing material on the seafloor and feed on a range of microscopic organisms, which helps control their population. Sea urchins can destroy tropical sea-grass beds when they are present in great numbers, harming the creatures that live there astrophysics
Why do they go by the name echinoderms?Because of their spiny skin, Echinodermata are so termed (from the Greek "echinos" for "spiny" and "dermo's" for "skin"). There are around 7,000 described extant species in this phylum. Only marine species can be classified as Echinodermata.
To know more about echinoderms visit:
https://brainly.com/question/10298388
#SPJ4
The question states "The amplitude of a body undergoing simple harmonic motion is doubled. Which of the following is also doubled?
a) maximum speed
b) frequency
c) total energy
d) period
When the amplitude of a body undergoing simple harmonic motion is doubled then the maximum speed is doubled.
Equation of shm is
x(t) = Xo + Acos(wt + f)
Differentiate it with t
v(t) = wA * sin(wt + f)
Then max speed Vmax is wA
So by above relation if we double the amplitude then velocity will be doubled.
If the force acting on the oscillating body is always in the direction opposite to the displacement of the body from the equilibrium or the mean position and its magnitude is proportional to the magnitude of displacement, the body is said to be executing SHM.
If the displacement vs. time curve of the oscillating body is sinusoidal in nature, the body is said to be executing SHM. This is another definition of SHM.
If the potential energy of the oscillating body is proportional to the square of its displacement with reference to the mean position, the body is said to be executing SHM. This is yet another definition of SHM.
To know more about simple harmonic motion here
https://brainly.com/question/23603440
#SPJ4
The net electric force acting on each of the three objects below is sketched as a green arrow. For example, if the green arrow points to the left the object feels a net electric force pushing it to the left. If there is no green arrow, the object feels no net electric force. Use this information to assign an electric charge to each object. That is, decide whether each object has a positive electric charge, a negative electric charge, or is neutral.
Electric force is the attraction or repelling force that exists between any two charged objects. Newton's laws of motion, which apply to all forces, describe how a force acts and what it does to the target body.
Electric force is produced by what?Mutual interactions between two charges produce electrical forces. When there are three or more charges present, the cumulative effects of each charge's interactions with the other charges produce the electric force acting on a single charge.
Electric force: how powerful is it?2.40 x 1043 times more powerful than the gravitational force is the electric force between these electrons. Or, to put it another way, gravity is only about a trillion trillion trillion trillion times as strong as electricity.
To know more about Electric force visit :-
https://brainly.com/question/20935307
#SPJ4
A 663 g ball strikes a wall at 12.2 m/s and rebounds at 10.4 m/s. The ball is in contact with the wall for 0.046 s. What is the magnitude of the average force acting on the ball during the collision
The Force acting on the ball during collision is 25.9 N.
To calculate the magnitude of the average force, we use the formula below.
F = m(v-u)/t..........Equation 1
Where:
F = Average force acting on the ball
m = mass of the ball
v = Final velocity
u = Initial velocity
t = time.
From the question,
Given:
m = 663 g = 0.663 kgv = 12.2 m/su = 10.4 m/st = 0.046 sSubstitute these given values into equation 1
F = 0.663 (12.2 -10.4 )/0.046
F = 25.9 N
Hence, The Force acting on the ball during collision is 25.9 N
Learn more about force here:
brainly.com/question/12970081
#SPJ4
the welding process that uses flux-cored wire without the use of an external shielding gas is called
Self Shielding FCAW is the use of an outside shielding gas.
What is FCAW with self-shielding?Many advantages come with self-shielded circulation arc welding (FCAW-S), such as good weldability, metal deposition rates, and exceptional chemical and mechanical qualities.
Self-shielding wire: what is it?With self-shielding wires, there is no need for a gas cylinder because they don't need an inert gas when the arc is operating.As a result, it's a fantastic option for offshore applications or situations where mobility is crucial.
To know more about external shielding gas visit:
https://brainly.com/question/30125623
#SPJ4
What is the formula of law of lever?
"Effort multiplied by an arm equals burden multiplied by an arm," The various loads on the proportionally shorter load arm can be moved by the effort arm.
What does a class lever mean?A lever is a straightforward device with a solid beam and a fulcrum. The effort (input force) and load (output force) are applied to the beam's ends. The pivot of the beam is thought to be the fulcrum.
What do you name a lever?Levers are devices that increase force, to put it simply. Because they merely have the handle and the fulcrum, we refer to them as "basic machines." The "arm" of the lever is the handle or bar; it is the portion that you push against or pull towards.
To know more about law of lever visit:-
https://brainly.com/question/2450974
#SPJ4
Breaking a Glass Soda Botle A glass soda bottle is emptied of soda and filled to the very top with water. A cork is carefully fitted into the top of the bottle, leaving no air between the cork and the water. (Figure 1) The top of the bottle has a diameter of Dtop-2.00 cm and the bottom of the bottle has a diameter of Dbot 6.50 cm. The glass breaks when it is exposed to Pmax = 70.0 MPa of pressure A student hits the cork sharply with her fist and the bottom of the bottle breaks. The student's fist has a mass of m = 0.480 kg and moves downward at a speed of vi = 5.00 m/s. It collides elastically with the cork and rebounds with the same speed. The collision lasts for t 1.20×10-4 s . In this problem, the positive direction is upward Part A What is the force that her fist exerts on the top of the bottle? Express your answer in newtons to three significant figures Hints 4.00x104 N Submit My Answers Give Up Correct Part B What is the magnitude of the force exerted on the bottom of the bottle?
The force exerted on the top of the bottle is given by the impulse-momentum theorem, which states that the impulse (change in momentum) of an object is equal to the force applied to the object multiplied by the time over which the force is applied.
F = (m * vi) / t = (0.480 kg * 5.00 m/s) / 1.20×10-4 s = 4.00x104 N
The force exerted on the bottom of the bottle is equal to the pressure (P) multiplied by the area (A) of the bottom of the bottle.
A = (Pi/4) * (Dbot^2) = (Pi/4) * (6.50 cm)^2 = 90.79 cm^2
F = P * A = 70.0 MPa * 90.79 cm^2 = 6.36x10^5 N
How to calculate force in physics?In physics, force is calculated using the formula: force = mass x acceleration (F = ma). The unit of force is typically the Newton (N). To calculate force, you need to know the mass of the object and the acceleration it is experiencing. Once you have that information, you can substitute it into the formula and solve for force.
Learn more about force in brainly.com/question/29044739
#SPJ1
25. What force must be exerted on the pedal cylinder of a hydraulic lift to support the weight of a 2000-kg car (a large car) resting on the wheel cylinder
A hydraulic lift's master cylinder must be subjected to a force of 136N.
What is the tenet of the Archimedes Principle?According to Archimedes' principle, an object that is totally or partially submerged in a fluid will feel upward buoyant force that is equivalent in strength toward the point of gravity here on displaced fluid.
Where is the principle of Archimedes used?The design principle for vessels and submarines uses Archimedes' principle. The Archimedes principle is the foundation of hydrometers.
According to Archimedes' principle:
F1 / A1 = F2 / A2
F2 = (A2 / A1) * F1
Also, the formula for the force is F = mg.
The formula for the area of the cylinder is A = , therefore we get
F2 = ( π [tex](r2)^{2}[/tex] / π [tex](r1)^{2}[/tex] ) * mg
Since the cylinders' diameter is 2 cm and 24 cm, r1 = 12 and r2 = 1.
Substituting the values to the derived equation, we get
F2 = ( π [tex](1)^{2}[/tex] / π [tex](12)^{2}[/tex] ) * 2000 * 9.8
2 = 136 N
Thus, the force exerted must be 136N.
To know more about Archimedes' principles:
https://brainly.com/question/1155674
#SPJ4
If you throw a ball up in the air at a speed of 14.9 m/s, how fast (in m/s) will it be moving when you catch it
When you catch a ball you threw in the skies at the a speed exceeding 14.9 m/s, it will also travel at the same speed when you catch it.
How fast is it?Time is a scalar that indicates the direction and speed of an object's motion. Usually, it is expressed in terms of measures of speed per amount of time, including m / sec (m/s) or miles each hour (mph) (mph). Speed is the size of velocity, a vector number that indicates both the direction and the speed of motion. Pace is a positive number with a unit of distance traveled per second.
When something is launched into air, it is exposed to the downward-moving force of gravity. The item accelerates downward at a velocity of 9.8 m/s2 as a result of this force
The object will slow down so that it rises and accelerate up as it lowers due to this acceleration. However, if there is very little time between the ball's release and the catch, the ball won't have a chance to slow down much. As a result, the pace at which i catch the ball will be quite similar to the pace at which originally threw it.
The ball will therefore continue to move at the same pace that it did when thrown.
To learn more about speed from the given link:
https:/brainly.com/question/13262646
#SPJ4
Please help
How does sound move from the source to the receiver? (a slinky moving back and forth)
Answer:
through a chain reaction of particle collisions in a medium.
Explanation:
Does a heavier object go down a ramp faster?
A heavier object go down a ramp at a same pace as a lighter object go down a ramp because of gravitational force acting on it in a major form and the rolling tangential force acting on it in a smaller manner..
Rolling motion happens when an object roll over from a ramp or any other sloppy surface whether it is rough or smooth. many forces act on it at the same moment. also in many forces rolling tangential force and gravitational force is also acting on it at the same moment. in which the gravitational force is acting on it at a bigger pace and plays an important role in rolling of the object from the ramp or any other sloppy surface. hence, by this information we can firmly consider that a heavier object go down a ramp at a same pace as a lighter object go down a ramp because of gravitational force acting on it in a major form.
Learn more about Rolling motion:
brainly.com/question/29568301
#SPJ4
By mass, the interstellar medium in our region of the Milky Way consists of
A) 70% Hydrogen, 30% Helium.
B) 70% Hydrogen, 28% Helium, 2% heavier elements.
C) 70% Hydrogen, 20% Helium, 10% heavier elements.
D) 50% Hydrogen, 50% Helium.
E) 50% Hydrogen, 30% Helium, 20% heavier elements.
The 70% Hydrogen, 28% Helium, 2% heavier elements. the interstellar medium in our region of the Milky Way consists of
What is interstellar?
Interstellar is a 2014 science fiction film directed, co-written, and co-produced by Christopher Nolan. The movie follows a team of astronauts who travel through a wormhole in search of a new home for humanity.
The cast includes Matthew McConaughey, Anne Hathaway, Jessica Chastain, and Michael Caine. The film was a major commercial success, grossing over $677 million worldwide, and was nominated for five Academy Awards. Interstellar has been praised for its realistic depiction of space exploration, its innovative visual effects, and its emotional story.
The interstellar medium in our region of the Milky Way is composed of mostly hydrogen (about 70%) and helium (about 28%), with the remaining 2% consisting of heavier elements, such as carbon, nitrogen, oxygen, and dust.
To learn about more interstellar
https://brainly.com/question/12497791
#SPJ4
Which of the following statements is probably true about the very first stars in the universe?
a. They were made only from hydrogen and helium.
b. H2
c. True
d. More massive than a hundred times the Sun
The correct statement about the very first stars in the universe is that they were made only from hydrogen and helium.
What is universe?
The universe is the totality of existence, encompassing all matter, energy, space, and time, and the physical laws and constants that govern them. It is the sum total of all that exists, was, and will be, including all galaxies, planets, stars, and phenomena such as light, gravity, and electromagnetic radiation. The universe is believed to have originated with a massive explosion known as the Big Bang, estimated to have occurred around 13.8 billion years ago. Since then, the universe has been expanding outward, ever increasing in size, complexity, and energy density. Scientists believe that the universe is composed of a vast array of components, including dark matter, dark energy, and dark radiation.
To learn more about universe
https://brainly.com/question/15324953
#SPJ4
Why the ball accelerates at a constant rate as it moves down the slope?
The ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.
Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.
Learn more about Rolling motion:
brainly.com/question/29568301
#SPJ4
Which type of engine takes in air, accelerates it, and pushes it out the exhaust nozzle to produce thrust that pushes the aircraft forward
A jets engine is a device that produces a strong pushing force known as thrust out of liquid fuel that is high in energy.
What do aircraft turbine engines do?A rotary engine called a gas turbine converts the flow of combustion into energy.Axial or centrifugal compressors (or both) can be used to boost air pressure and temperature before it enters the combustion chamber. Ambient air is pulled into the engine intake.
How is thrust produced by a jet engine?By raising internal engine pressure, jet or rocket engines generate thrust.This higher pressure inside the jet and rocket engine causes the forward force to be greater than the backward force.
To know more about type of engine visit:
https://brainly.com/question/11417828
#SPJ4
A 1.41-kg block slides across a rough surface such that it slows down with an acceleration of 1.10 m/s2. What is the coefficient of kinetic friction between the block and the surface
The coefficient of kinetic friction between the block and the surface is 0.11.
The coefficient of kinetic friction can be found using the equation:
friction = force of friction = coefficient of kinetic friction * normal force
The normal force is equal to the weight of the object, which can be calculated as weight = mass * acceleration due to gravity
The force of friction can be calculated using the equation:
friction = force of friction = coefficient of kinetic friction * weight
The coefficient of kinetic friction can be found by rearranging the equation and substituting the known values:
coefficient of kinetic friction = friction / weight
= (1.10 m/s2) / (1.41 kg * 9.8 m/s2)
= 0.11
So, the coefficient of kinetic friction between the block and the surface is 0.11.
Learn more about Kinetic friction here:
https://brainly.com/question/20241845
#SPJ4
The connected bar BC is used to increase the lever arm of the crescent wrench as shown. If a clockwise moment of MA = 120 N·m is needed to tighten the nut at A and the extension d = 300 mm, determine the required force F in order to develop this moment. 15° F 30 300 mm А Probs. 427/28/29
The value of d is 401.550.
Momentum can be viewed as a body's "power" while it is moving, or the amount of force it can exert on another body. For instance, a baseball (small mass) thrown quickly can have the same momentum as a bowling ball (big mass) going extremely slowly (low velocity) (high velocity).
"The motion of an item equal to the product of its mass and its velocity" is referred to as momentum. When we say anything has momentum, we are referring to its precise mass and direction of motion.
C+ΣMA = ( 200 cos 45) (d cos 30+0-3) -
(200 sin 45°) (d sin 30°)= -120
(200COS 45°) (0.3) + (200 cos 45°) (d cos30) +
(200sin 45') (d sin 30") = 120
d = 120- (200 cos 45) (0.3) / 200 (cos 45 Cos 30+ sin 45 sin 30)
d = 0.40155m
d = 401.55mm
d = 401.550
To learn more about momentum from given link
https://brainly.com/question/18798405
#SPJ4
Complete Question -
How much work is done by the environment in the process shown in the figure? Express your answer with the appropriate units
IA Wasxt = Value Units Submit Previous Answers Request Answer incorrect; Try Again; 19 attempts remaining Part B Is energy transferred from the environment to the system or from the system to the environment? O Energy is transferred from the environment to the system. O Energy is transferred from the system to the environment. Submit
Wasxt is not good. As a result, the system transfers energy to the environment.
How is work completed?
Force may be used to transmit energy. The quantity of energy a force expended to move an item is referred to as the work done. The relationship between Work and Energy is so straightforward.
The work done by a force is calculated as the product of the object's displacement and its component of the applied force in the displacement direction.
Using energy efficiency
Ki + Ui + Wext = Kf + Uf + dEth
Substitute the value by data chart in above equation we get,
4 + 1 + Wasxt = 1 + 2 + 1
Wasxt = 4 - 5
Wasxt = -1 J
Since Wasxt is negative So energy is transferred from the system to the environment.
For such more question on Work and Energy .
https://brainly.com/question/22236101
#SPJ4