Answer:
0.9 kg
Explanation:
We would use the equation F=m*a to solve this equation. First, we would need to get mass by itself therefore we divide out acceleration from both sides ( F/a=m*a / a ) acceleration would cancel out and the end equation should look like this ( F/a = m or m = F/a) After we do that we plug in the numbers 1.35 N / 1.5 m/s^2 we get 0.9 kg, assuming you are using kg.
Answer: 0.90 kilograms
Explanation:
Darwin believed that emotional expressions began as ________ that came to have evolutionary value because they ________. Select one: a. physiological reactions; increased the efficiency of bodily reactions b. communication devices; increased the efficiency of bodily reactions Incorrect c. physiological reactions; convey emotional states to other members of the species d. random mutations; convey expectations to other members of the species
Answer:
c. physiological reactions; convey emotional states to other members of the species
Explanation:
Darwin believed that emotional expressions began as physiological reactions that came to have evolutionary value because they convey emotional states to other members of the species. These reactions are used by many different types of species to convey various things.
The tub of a washer goes into its spin-dry cycle, starting from rest and reaching an angular speed of 3.0 rev/s in 13.0 s. At this point, the person doing the laundry opens the lid, and a safety switch turns off the washer. The tub slows to rest in 12.0 s. Through how many revolutions does the tub turn during this 25 s interval
Answer:
The tub turns 37.520 revolutions during the 25-second interval.
Explanation:
The total number of revolutions done by the tub of the washer ([tex]\Delta n[/tex]), in revolutions, is the sum of the number of revolutions done in the acceleration ([tex]\Delta n_{1}[/tex]), in revolutions, and deceleration stages ([tex]\Delta n_{2}[/tex]), in revolutions:
[tex]\Delta n = \Delta n_{1} + \Delta n_{2}[/tex] (1)
Then, we expand the previous expression by kinematic equations for uniform accelerated motion:
[tex]\Delta n = \frac{1}{2}\cdot ( \ddot n_{1}\cdot t_{1}^{2} - \ddot n_{2} \cdot t_{2}^{2})[/tex] (1b)
Where:
[tex]\ddot n_{1}, \ddot n_{2}[/tex] - Angular accelerations for acceleration and deceleration stages, in revolutions per square second.
[tex]t_{1}, t_{2}[/tex] - Acceleration and deceleration times, in seconds.
And each acceleration is determined by the following formulas:
Acceleration
[tex]\ddot n_{1} = \frac{\dot n}{t_{1}}[/tex] (2)
Deceleration
[tex]\ddot n_{2} = -\frac{\dot n}{t_{2} }[/tex] (3)
Where [tex]\dot n[/tex] is the maximum angular velocity of the tub of the washer, in revolutions per second.
If we know that [tex]\dot n = 3\,\frac{rev}{s}[/tex], [tex]t_{1} = 13\,s[/tex] and [tex]t_{2} = 12\,s[/tex], then the quantity of revolutions done by the tub is:
[tex]\ddot n_{1} = \frac{3\,\frac{rev}{s} }{13\,s}[/tex]
[tex]\ddot n_{1} = 0.231\,\frac{rev}{s^{2}}[/tex]
[tex]\ddot n_{2} = -\frac{3\,\frac{rev}{s} }{12\,s}[/tex]
[tex]\ddot n_{2} = -0.25\,\frac{rev}{s^{2}}[/tex]
[tex]\Delta n = \frac{1}{2}\cdot ( \ddot n_{1}\cdot t_{1}^{2} + \ddot n_{2} \cdot t_{2}^{2})[/tex]
[tex]\Delta n = \frac{1}{2}\cdot \left[\left(0.231\,\frac{rev}{s^{2}} \right)\cdot (13\,s)^{2}-\left(-0.25\,\frac{rev}{s^{2}} \right)\cdot (12\,s)^{2}\right][/tex]
[tex]\Delta n = 37.520\,rev[/tex]
The tub turns 37.520 revolutions during the 25-second interval.
A bug crawls 3.0 mm east, 4.0mm north, and then 5.0 mm at 45 north of east. Draw a diagram showing its displacements and determine its resultant displacement vector by use of the diagram.
Answer:
Explanation is given
Mark Me as Branliest
caculate the component of a force of 200 ns
at a direction of 60° to the force
Answer:
[tex]F_x = 100N[/tex]
[tex]F_y = 100\sqrt 3 \ N[/tex]
Explanation:
Given
[tex]F = 200N[/tex]
[tex]\theta = 60^o[/tex]
Required
The component of the force in F direction
To do this, we simply calculate the force in the vertical and horizontal direction.
This is calculated as:
[tex]F_x = F * \cos(\theta)[/tex] --- Horizontal
[tex]F_y = F * \cos(\theta)[/tex] ---- Vertical
So, we have:
[tex]F_x = F * \cos(\theta)[/tex] --- Horizontal
[tex]F_x = 200N * \cos(60^o)[/tex]
[tex]F_x = 200N * 0.5[/tex]
[tex]F_x = 100N[/tex]
[tex]F_y = F * \cos(\theta)[/tex] ---- Vertical
[tex]F_y = 200N * \sin(60^o)[/tex]
[tex]F_y = 200N * \frac{\sqrt 3}{2}[/tex]
[tex]F_y = 100\sqrt 3 \ N[/tex]
The large scale structure of the universe has been carefully mapped using redshift surveys of a very large number of galaxies. Answer the following: Suppose that a large telescope with modern equipment can measure the redshift to a galaxy in just 10 minutes. And suppose we want to spend no more than a year mapping the distribution of galaxies. How many redshifts can be surveyed
Answer:
26280
Explanation:
In current time, good telescope can measure redshift to a galaxy in 10 minutes.
Thus, in one year that has on an average 365 days, the total time taken to measure redshifts is = ( 365 *12 *60) minute
= 262800 minutes .
Hence, the number of redshifts observed in a year = (262800/10) = 26280
What effect does increased blood flow have on the body when performing exercises? A. delivers more sugar to organs B. delivers more energy to muscles C. delivers more oxygen to the body D. delivers more protein to muscles Please select the best answer from the choices provided. O A . OB ос OD Next Submit Save and Exit Mark this and return
How can a small spark start a huge explosion
Answer:
The explosion is set off by an electrostatic spark. When the mixture ignites, the rapid increase in temperature brings about a huge increase in gas pressure. If the burning vapour were to be confined the resulting rise in pressure could destroy the chamber with a loud explosion.
Explanation:
50 POINTS/BRAINLIEST TO CORRECT!
A 1.25 x 10-4 C charge is moving
5200 m/s at 37.0° to a magnetic field
of 8.49 x 10-4 T. What is the magnetic
force on the charge?
Answer: 3.32x10^-4
Explanation: Works for Acellus
Magnitude of magnetic force F= qvB Sin0®
q is the magnitude of charge moving with speed v in magnetic field B. Theta is the angle between velocity and magnetic field.
F=1.25×10⁻⁴C×5200m/s×8.49×10⁻⁴T(sin37deg).
F=3.32×10⁻⁴N.
What is charge?An electric charge is the property of matter where it has more or fewer electrons than protons in its atoms. Electrons carry a negative charge and protons carry a positive charge.
Matter is positively charged if it contains more protons than electrons, and negatively charged if it contains more electrons than protons.
Thus, the magnetic force on the charge is 3.32×10⁻⁴N.
Learn more about charge here,
https://brainly.com/question/14692550
#SPJ2
What is the most commonly used semiconducting material? Nickel Aluminum b. Cobalt d. Silicon
Answer:
i believe the answer is D
Explanation:
Hope it works
Answer:
D. SiliconExplanation:
Silicon is the most widely used type of semiconductor material. Its major advantage is that it is easy to fabricate and provides good general electrical and mechanical properties.A small object with mass 0.200 kg moves with constant speed in a vertical circle of radius 0.500 m. It takes the object 0.500 s to complete one revolution. (a) What is the translational speed of the object
Answer:
6.28 m/s.
Explanation:
Given that,
The mass of the object, m = 0.2 kg
The radius of the circle, r = 0.5 m
It takes the object 0.500 s to complete one revolution.
We need to find the translational speed of the object. Let it is v. We know that,
[tex]v=\dfrac{2\pi r}{t}\\\\v=\dfrac{2\pi \times 0.5}{0.5}\\\\v=6.28\ m/s[/tex]
So, the transalational speed of the object is 6.28 m/s.
4. You currently have TWO 9 volt batteries connected to a 82 resistor. How
much current is flowing through the circuit? *
1.125 A
5 A
72 A
2.25 A
Back
Next
Never submit passwords through Gon
Explanation:
Total voltage = 9 × 2 = 18v
Resistance = 82 Ω
Ohm's law::
V = IR
18v = 82 Ω × I
18v /82 /Ω = I
18/82 Ampere is the current
Which of the following best describes the upper respiratory tract?
O It takes air in from outside the body.
O It is where oxygen and carbon dioxide are exchanged.
O It is located inside the thorax.
O It is not directly involved in respiration.
50 POINTS‼️‼️‼️‼️‼️
A 4.88 x 10-6 C charge moves 265 m/s
perpendicular (at 90°) to a magnetic
field of 0.0579 T. What is the magnetic
force on the charge?
Answer: 0
Explanation: Trust
The magnetic force on the charge is approximately 6.47 x 10^(-4) Newtons.
The magnetic force on a charged particle moving through a magnetic field can be calculated using the formula:
F = q * v * B * sin(θ)
Where:
F is the magnetic force,
q is the charge of the particle (in this case, 4.88 x 10^(-6) C),
v is the velocity of the particle (in this case, 265 m/s),
B is the magnetic field strength (in this case, 0.0579 T),
θ is the angle between the velocity vector and the magnetic field vector (in this case, 90 degrees).
Plugging in the values:
F = (4.88 x 10^(-6) C) * (265 m/s) * (0.0579 T) * sin(90°)
Since sin(90°) is equal to 1, the equation simplifies to:
F = (4.88 x 10^(-6) C) * (265 m/s) * (0.0579 T) * 1
Calculating the value:
F = 6.47 x 10^(-4) N
Therefore, the magnetic force on the charge is approximately 6.47 x 10^(-4) Newtons.
Learn more about newton on:
https://brainly.com/question/4128948
#SPJ2
find the resistance of wire of
0.65m Radius 0.25
and
resistivity 3x10-6 OHM
Complete Question:
Find the resistance of a wire of length 0.65 m, radius 0.25 mm and resistivity 3 * 10^{-6} ohm-metre.
Answer:
Resistance = 9.95 Ohms
Explanation:
Given the following data;
Length = 0.65 m
Radius = 0.25 mm to meters = 0.00025 m
Resistivity = 3 * 10^{-6} ohm-metre.
To find the resistance of the wire;
Mathematically, resistance is given by the formula;
[tex] Resistance = P \frac {L}{A} [/tex]
Where;
P is the resistivity of the material. L is the length of the material.A is the cross-sectional area of the material.First of all, we would find the cross-sectional area of the wire.
Area of circle = πr²
Substituting into the equation, we have;
Area = 3.142 * (0.00025)²
Area = 3.142 * 6.25 * 10^{-8}
Area = 1.96 * 10^{-7} m²
Now, to find the resistance of the wire;
[tex] Resistance = 3 * 10^{-6} * \frac {0.65}{1.96 * 10^{-7}} [/tex]
[tex] Resistance = 3 * 10^{-6} * 3316326.531 [/tex]
Resistance = 9.95 Ohms
How can magnetic levitation be improved?
A 12 kg hanging sculpture is suspended by a 80-cm-long, 6.0 g steel wire. When the wind blows hard, the wire hums at its fundamental frequency. What is the frequency of the hum
Answer:
[tex]F=78.3hz[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=12[/tex]
Length [tex]l=80cm=0.8m[/tex]
Linear density [tex]\mu= 6.0g[/tex]
Generally the equation for Frequency is mathematically given by
[tex]F=\frac{1}{2l}\sqrt{\frac{T}{K}}[/tex]
[tex]F=\frac{1}{2(0.8)}\sqrt{\frac{12*9.8*0.8}{6*10^{-3}}}[/tex]
[tex]F=78.3hz[/tex]
how to get infinite thanks could you show me please ☺️
Answer: divide by zero, or square root of a negative
Explanation: If your question is how to get infinity as an answer to a problem, that generally means that the answer is undefined or doesn't exist.
A couple of ways to get that...
You try to divide by zero. In other words, a problem that asks you to perform something like this: 5/0= or 23/(4-4)= Such a problem will give you an error on a calculator because the answer is infinity or doesn't exist. Another way is to try to get the square root of a negative number. That answer doesn't exist as a real number, so [tex]\sqrt{-4\\}[/tex] will also give you an error on a calculator.
Two forces and are applied to an object whose mass is 11.8 kg. The larger force is . When both forces point due east, the object's acceleration has a magnitude of 0.408 m/s2. However, when points due east and points due west, the acceleration is 0.227 m/s2, due east. Find (a) the magnitude of and (b) the magnitude of .
Can you please fill in whatever goes in the blanks ?
Without them, the question makes no sense and has no answer.
Two forces (___) and (___) are applied to an object whose mass is 11.8 kg. The larger force is (___) . When both forces point due east, the object's acceleration has a magnitude of 0.408 m/s2. However, when (___) points due east and (___) points due west, the acceleration is 0.227 m/s2, due east. Find (a) the magnitude of (___) and (b) the magnitude of (___) .
Which Circut Model is more efficient, why?
Answer:
right one is more efficient
Explanation:
What is the main way in which heat transfer occurs in liquids and gases?
Un objeto tiene una velocidad de vi=3i-4j m/s, luego duplica su velocidad en 12 segundos, calcula la magnitud de la distancia que recorre en metros.
Answer:
Explanation:
This is an exercise in kinematics, the speed they give is in two dimensions, let's work on each component
X axis
initial velocity v₀ₓ = 3 m / s in a time of t = 12 s, the velocity is doubled, the final velocity is vₓ = 6 m / s
acceleration is
vₓ = v₀ₓ + aₓ t
aₓ = [tex]\frac{v_x - v_{ox}} {t}[/tex]
aₓ = 6 - 3/12
aₓ = 0.25 m / s²
the distance traveled is
vₓ² = v₀ₓ² + 2 aₓx x
x = vx² - vox² / 2a
x = 6² - 3² / 2 0.25
x = 54 m
Y axis
we look for acceleration
v_y = v_{oy} + a_y t
a_y = [tex]\frac{v_y - v_{oy} }{t}[/tex]
a_y = [tex]\frac{8 -4} {12}[/tex]
ay = 0.3333 m / s²
the distance is
v_y² = v_{oy}² + 2 a⁷y
y = vy² - voy² / 2 0.25
y = 8² - 4² / 2 0/3333
y = 72 m
the distance traveled is
r = (54 i + 72j) m / s
A 280-m-wide river flows due east at a uniform speed of 4.7m/s. A boat with a speed of 7.1m/s relative to the water leaves the south bank pointed in a direction 26o west of north. What is the (a) magnitude and (b) direction of the boat's velocity relative to the ground
Answer:
(a) The speed is 7.96 m/s
(b) The direction is 76 degree from positive X axis in counter clockwise direction.
Explanation:
Width of river = 280 m
speed of river, vR = 4.7 m/s towards east
speed of boat with respect to water, v(B,R) = 7.1 m/s at 26 degree west of north
[tex]vR = 4.7 i \\\\v(B,R) = 7.1 (- sin 26 i + cos 26 j) = - 3.1 i + 6.4 j[/tex]
(a) The velocity of boat with respect to ground is
[tex]\overrightarrow{v}_{(B,R)}=\overrightarrow{v}_{(B,G)}-\overrightarrow{v}_{(R,G)}\\\\- 3.1 \widehat{i} +6.4 \widehat{j}=\overrightarrow{v}_{(B,G)} - 4.7 \widehat{i}\\\\\overrightarrow{v}_{(B,G)} = 1.6 \widehat{i} + 6.4 \widehat{j}\\\\{v}_{(B,G)} = \sqrt{1.6^2 + 6.4^2}=6.96 m/s[/tex]
(b) The direction is given by
[tex]tan\theta = \frac{6.4}{1.6} =4\\\\\theta = 76^o[/tex]
Electricity is the result of moving electrons, so it's classified as
A. Kinetic Energy
B. Gravitational Energy
C. Potential Energy
D. Elastic Energy
During hockey practice, two pucks are sliding across the ice in the same direction. At one instant, a 0.18-kg puck is moving at 16 m/s while the other puck has a mass of 0.14 kg and a speed of 3.8 m/s. What is the velocity of the center of mass of the two pucks?
Answer:
10.66 m/s
Explanation:
Applying,
The law of conservation of momentum,
Total momentum before collision = Total momentum after collision
mu+m'u' = V(m+m').............. Equation 1
Where m = mass of the first puck, u = initial velocity of the first puck, m' = mass of the second puck, u' = initial velocity of the second puck, V = Velocity of the center of the two pucks
make V the subject of the equation
V = (mu+m'u')/(m+m').............. Equation 2
Given: m = 0.18 kg, u = 16 m/s, m' = 0.14 kg, u' = 3.8 m/s
Substitute these values into equation 2
V = [(0.18×16)+(0.14×3.8)]/(0.18+0.14)
V = (2.88+0.532)/(0.32)
V = 3.412/0.32
V = 10.66 m/s
Suppose the Earth were squeezed down to the size of a small mountain. The mass of the Earth would not change, just its volume and radius. If you were now standing on the surface, would the gravitational force on you be greater than, less than or the same as before the Earth was squeezed?
Explanation:
Much greater. Gravitational force depends on the mass and separation distance. Shrinking the earth means the mass remains the same while the radius gets smaller. Since gravitational force is inversely proportional to the square of the separation distance, as shown by Newton's universal gravitational law
[tex]\:\:\:F_G = G \dfrac{mM_E}{R^2}[/tex]
shrinking the radius even by a factor of 10 will cause your weight, which also happens to be the gravitational force of the earth on you, to be 100 times more.
If the mass of the Earth remains the same and only its volume and radius are decreased, then the average density of the Earth would increase significantly.
What is gravitational force?Gravity, also known as gravitational force, pulls objects with mass towards each other. We frequently consider the force of gravity from Earth.
If the Earth's mass remains constant while its volume and radius are reduced, the average density of the Earth increases significantly.
This is due to the fact that the mass has been compressed into a much smaller volume.
As a result, standing on the surface, the gravitational force on you would be greater than before the Earth was compressed to the size of a small mountain.
When the Earth is compressed, the distance between you and the center of the Earth decreases while the mass remains constant.
Thus, your gravitational force increases.
For more details regarding gravitational force, visit:
https://brainly.com/question/12528243
#SPJ2
Two argon atoms form the molecule Ar2 as a result of a van der Waals interaction with U0 = 1.68×10-21 J and R0= 3.82×10 the frequency of small oscillations of one Ar atom about its equilibrium position.
Answer:
[tex]\mathbf{f_o =1.87 \times 10^{11} \ Hz}[/tex]
Explanation:
From the given information:
The elastic potential energy can be calculated by using the formula:
[tex]U_o = \dfrac{1}{2}kR_o^2[/tex]
Making K the subject;
[tex]K = \dfrac{2 U_o}{R_o^2}[/tex]
[tex]k = \dfrac{2\times 1.68 \times 10^{-21}}{(3.82\times 10^{-10})^2}[/tex]
k = 2.3 × 10⁻² N/m
Now; the frequency of the small oscillation can be determined by using the formula:
[tex]f_o = \dfrac{1}{2 \pi}\sqrt{\dfrac{k}{m}}[/tex]
where;
m = mass of each atom = 1.66 × 10⁻²⁶ kg
[tex]f_o = \dfrac{1}{2 \pi}\sqrt{\dfrac{2.3 \times 10^{-2} N/m}{1.66 \times 10^{-26} \ kg}}[/tex]
[tex]\mathbf{f_o =1.87 \times 10^{11} \ Hz}[/tex]
A reservoir located in the mountain 250 m above sea level flows through a pipe to a hydroelectric plant in a town at sea level. Assuming the pressure in both locations are the same and the density of water is 1000 kg/m3. How fast will the water flow into the plant?
Answer:
v₂ = 70 m / s
Explanation:
For this exercise let's use Bernoulli's equation
where subscript 1 is for the top of the mountain and subscript 2 is for Tuesday's level
P₁ + ½ ρ v₁² + ρ g y₁ = P₂ +1/2 ρ v₂² + ρ g y₂
indicate that the pressure in the two points is the same, y₁ = 250 m, y₂ = 0 m, the water in the upper part, because it is a reservoir, is very large for which the velocity is very small, we will approximate it to 0 (v₁ = 0), we substitute
ρ g y₁ = ½ ρ v₂²
v₂ = [tex]\sqrt {2g \ y_1}[/tex]
let's calculate
v₂ = √( 2 9.8 250)
v₂ = 70 m / s
Two charged bees land simultaneously on flowers that are separated by a finite distance. For a few moments, the charged bees rest on the flowers. The charged bees both generate an electric field, and while the charged bees are resting on the flowers, the net electric field at some distance between them is zero.
Required:
Do the bees have the same or opposite signs of charge?
Answer:
the charge of the bees must be of the same sign
Explanation:
The electric field is given by the relation
E = k q / r²
This electric field has outgoing direction if the charge is positive and incoming towards the charge if it is negative.
The force generated by this field on a test charge is
F = q E
Since the charge is a scalar, the direction of the force is the same as the electric field.
In this case the two flowers are at a certain distance and the two charged bees land on them, so the force on a test charge is the vector sum of the force that each bee creates, so that this force is subtracted from the two bees must have the same charge sign.
The force created by the bee on the left goes to the right and the force created by the bee on the right goes to the left, so the forces are subtracted,
Consequently the charge of the bees must be of the same sign
Scientific theories are deductive in nature.?
Answer:
deductive reasoning usually follows steps .
That is, how we predict what the observations should be if the theory were correctA motor has an output of 1000 watts. When the motor is working a full capacity, how much time will it require to lift a 50 Newton weight 100 meters?
The time required to lift the weight is 5 seconds.
What is time?Time is the measure of past or present events or occurrences. The S.I unit of time is seconds (s).
To calculate the time required to lift the weight, we use the formula below.
Formula:
P = Fd/t.................. Equation 1Where:
P = PowerF = Weightd = distance.t = timemake t the subject of the equation.
t = Fd/P................ Equation 2From the question,
Given:
F = 50 Nd = 100 mP = 1000 WSubstitute these values into equation 2
t = (50×100)/1000t = 5 seconds.Hence, The time required to lift the weight is 5 seconds.
Learn more about time here: https://brainly.com/question/4931057