On a train ride cross-country, the trees, buildings, and people appear to be speeding by the window. This is because the train is moving in the forward direction.
Scientists use the shared system for making measurements. This system is also called system of international.
Physical science studies the relationships between natural but non-living objects. Physical science is ordinarily thought of as consisting of four broad areas: astronomy, physics, chemistry, and the Earth sciences.
If 6.6 tyrannosaurs weigh 30,000 kg, then one tyrannosaur weigh about 4545 kg. For most activities, the earth makes a handy frame of reference.
Learn more about science here: https://brainly.com/question/17216882
#SPJ1
The temperature of a sample of liquid water changes from 50°C to 30°C. Which statement best explains the change that
nust happen at the molecular level?
O The molecules move more quickly and their average kinetic energy increases.
O The molecules move more slowly and their average kinetic energy decreases.
O The molecules move more quickly and their average kinetic energy decreases.
O The molecules move more slowly and their average kinetic energy increases.
Answer:
the molecules move more quickly and their average kinetic energy decreases :D
Explanation:
When the reaction between zinc and hydrochloric acid is complete, _____ is the free element
Answer:
Hydrogen Gas is the free element
Write the formula for an isotope of oxygen with nine neutrons, including the mass number and the atomic number. Write the answer in the form XZA using the atomic symbol button in the toolbar, where A is the mass number, Z is the atomic number, and X is the chemical symbol for the unknown element.
The formula for an isotope of oxygen with nine neutrons, including the mass number and the atomic number is 17/8 O.
What is an isotope?Isotope is any of two or more forms of an element where the atoms have the same number of protons, but a different number of neutrons within their nuclei.
This means that atoms of isotopes will have the same atomic number but a different mass number.
According to this question, an isotope of oxygen has 9 neutrons. If oxygen has an atomic number of 8, the formula of this particular isotope is as follows: 17/8 O.
Learn more about isotopes at: https://brainly.com/question/12955625
#SPJ1
Select the correct answer. in this equation, stands for carbon, stands for nitrogen, and stands for oxygen. which equation represents this reaction? a. 2co 2no → 2cn2 o2 b. co no → 2co2 2n2 c. 2co2 2no → co2 n2 d. 2co 2no → 2co2 n2 e. 2co 2no → 2cn2 o2
The chemical equation for the reaction between carbon oxide and nitrogen oxide is shown below:
[tex]CO + NO \rightarrow CO_2 + N_2[/tex]
What is a chemical equation?A chemical equation is an equation which uses the symbols of elements and compounds to represent the reactions which occur between elements or compounds to form products.
The chemical symbol for carbon is C, nitrogen is N, and oxygen is O.
The equation representing the reaction between carbon oxide and nitrogen oxide is shown below:
[tex]CO + NO \rightarrow CO_2 + N_2[/tex]
Therefore, the chemical equation for the reaction between carbon oxide and nitrogen oxide represents the reaction to form carbon dioxide and nitrogen gas.
Learn more about chemical equation at: https://brainly.com/question/13182946
#SPJ4
If phosphorous has 5 valence electrons, how many does sulfur have?
Answer:
6
Explanation:
The atomic number for phosphorous is 15, meaning that it has 15 electrons (and protons). The first and second shells would be filled up with 2 and 8 electrons respectively, leaving 5 which goes on the third shell, which is also the valence shell, meaning phosphorous has 5 valence electrons.
Since the atomic number of sulfur is 16, the first and second shells are also filled up with 2 and 8 electrons respectively, leaving 6 to be on the third shell, the valence shell. Hence, sulfur has 6 valence electrons.
can you treat a sulfuric acid burn with sodium hydroxide
Answer:
I think yes
Explanation:
sorry i havent done these type a questions in a while
O2- is the Lewis ______ in the following reaction
SO3(g) + O2-(aq) —> SO4^2-(aq)
A. Acid
B.base
[tex]O^{2-}[/tex] is the Lewis base in the following reaction:
[tex]SO_3(g) + O^{2-}(aq)[/tex] → [tex]SO_4^{2-}(aq)[/tex]
What is lewis base?Lewis base is a species that donates an electron pair.
In the above-given chemical equation, the [tex]O^{2-}[/tex]is the lewis base which is donating an electron pair to the central atom of [tex]SO_3[/tex] to form [tex]SO_4^{-2}[/tex].
Hence, [tex]O^{2-}[/tex] is the Lewis base in the following reaction:
[tex]SO_3(g) + O^{2-}(aq)[/tex] → [tex]SO_4^{2-}(aq)[/tex]
Learn more about the lewis base here:
https://brainly.com/question/15570523
#SPJ1
The use of lead paint in houses was banned in 1978 due to the health hazards associated with lead, specifically that
high levels of lead exposure is dangerous to humans. which branch of chemistry would study this?
Toxicology is the branch which studies about toxic chemicals and their effects.
What is Toxicology ?Toxicology is the branch in science in which the researches and study are done for finding the effect of the toxic or poisonous elements on plants , animals , human and earth at large.
High levels of lead exposure is dangerous to humans as it can cause permanent disabilities , it is carcinogenic and hence can lead to death.
This is studied in toxicology.
To know more about Toxicology
https://brainly.com/question/5020436
#SPJ1
What's reaction kinetics?
Answer: a branch of chemistry concerned with the rate of chemical reactions, the factors that influence these rates, and the use of rate studies to clarify reaction mechanisms
calculate the mass of 3.5 moles of copper sulphate
Answer: 558.5545 g
Explanation:
The formula for a sulphate ion is [tex]\text{SO}_{4}^{\text{ }2-}[/tex], so the formula for copper sulphate is [tex]\text{CuSO}_{4}[/tex].
The atomic mass of copper is 63.546 g/mol.The atomic mass of sulfur is 32.065 g/mol.The atomic mass of oxygen is 15.994 g/mol.This means the formula mass of copper sulphate is:
63.546+32.065+4(15.994)=159.587 g/mol.So, in 3.5 moles, the mass is (159.587)(3.5)=558.5545 g
How many half-lives of time have passed when only a little more than 3% of a sample
original C-14 remains?
Answer:
5.06 half lives
Explanation:
1/2 ^n = .03 (.03 is 3% in decimal)
log both sides
n log 1/2 = log .03
n = 5.06 half lives
A gas has a volume of 0.550 l at a temperature of -55.0 c. what will the volume be if the temperature is increased to 30.0 c and the pressure remains constant?
Gay-Lussac's law: [tex]\frac{V1}{T1}[/tex]=[tex]\frac{V2}{T2}[/tex]
We need to convert temperature from Celsius to Kelvin
-55 C = 218 K
30 C = 303 K
V2 = V1*T2 / T1 = 0.550 *303 / 218 = 0.764 l
The solubility of sodium hydrogen carbonate in water 20 degrees is 9.6 g/100 g h2o.
what is the mole fraction of nahco3 in a saturated solution?
what is the molality of the solution?
We can see from the details below that, the value of the solution's molality is 1.14 mol/Kg.
What is solubility?The term solubility has to do with the quantity of solute that is able to dissolve in a given quantity of solvent. We have the solubility of the sodium hydrogen carbonate in water at 20 degrees as 9.6 g/100 g h2o.
Number of moles of sodium hydrogen carbonate = 9.6 g/84 g/mol = 0.114 moles
Number of moles water = 100 g /18 g/mol = 5.55 moles
Mole fraction of sodium hydrogen carbonate is obtainable by the use of the relation;
0.114 moles/0.114 moles + 5.55 moles
= 0.02
Molality of the solution = 0.114 moles/0.1 Kg = 1.14 mol/Kg
Learn more about solubility:https://brainly.com/question/8591226
#SPJ4
Which characteristic of the cats shows a variation?
A phenotypic characteristic and/or trait of the cats that exhibit variation is the fur color.
What is phenotypic variation?Phenotypic variation is any type of distinguishable value for a trait that depends on genetic and/or environmental factors.
Cats exhibit different fur colors depending on specific gene variants (alleles) that are inherited from their parents.
In conclusion, a phenotypic characteristic or trait of the cats that show a variation is the fur color.
Learn more about phenotypic variation here:
https://brainly.com/question/14926046
#SPJ1
Calculate the energy of a photon of this light wave in joules. [Show all calculations, including the equation and substitution with units.]
The energy of the photon from the calculation performed is 3.5 * 10^-16 J.
What is a photon?A photon is a packet of light. It was derived from the theory of Albert Einstein. The energy of a photon is obtained from; E = hc/λ
h= Plank's constantc = speed of lightλ = wavelengthNow we have that;
E = 6.6 * 10^-34 * 3 * 10^8/562 * 10^-9
E = 3.5 * 10^-16 J
Missing parts:
Calculate the energy, in joules, of a photon of green light having a wavelength of 562nm?
Learn more about energy of photon:https://brainly.com/question/20912241
#SPJ1
how many moles are in 2.00g of beryllium chloride
Answer:
[tex]\huge\bold\color{pink}{- Magdonal -}[/tex]
[tex]\huge\red{\overline{\qquad\qquad\qquad\qquad}}[/tex]
[tex]\pink{\rule{1pt}{999999pt}}[/tex]
Answer:
.025 moles
Explanation:
Be Cl2 is beryllium chloride
Be = 9.0121 gm/mole
Cl = 35.45 gm mole
Be Cl2 = 79.91 gm/mole
2 gm / 79.91 gm/mole = .025 moles
20.4 L of 0.650 M HCI reacts with 36L of KOH solution of unknown concentration. What is the molarity of the KOH solution?
Answer: 0.37 M
Explanation:
[tex]M_{A}V_{A}=M_{B}V_{B}\\(20.4)(0.650)=M_{B}(36)\\M_{B}=\frac{(20.4)(0.650)}{36}=\boxed{0.37 \text{ M}}[/tex]
. 20 mL ethanol in 60 mL solution
Given : Volume of Solute = _________ Volume of Solution = _________
Volume of Solvent = _______
Formula :
Thnx sa answer!
The solution is the mixture of the solute into the solvent particles. In 60 mL solution, 59.8 mL of solvent is added.
What are solute and solvent?Solute and solvent are the components of a solution. They react and mix together to produce a homogenous mixture. The solute is a substance that is added to the solvent.
Solvents are substances that dissolve the added solute in them to make a homogenous solution.
Given,
Volume of Solute = 0.20 mL
Volume of Solution = 60 mL
The volume of solvent is calculated as:
Volume of solvent = Volume of solution - Volume of solute
= 60- 0.20
= 59.8 mL.
Therefore, 59.8 mL of solvent is present in 60 mL of solution.
Learn more about solute and solvent here:
https://brainly.com/question/20458032
#SPJ1
2. suppose you added 40 ml of water to your vinegar sample instead of 20 ml. would the titration have required more, less or the same amount of naoh solution for a complete reaction? explain.
The titration would require the same amount of NaOH.
Number of moles and dilutionThe number of moles of solute in a solution remains the same irrespective of the amount of water added to dilute the solution.
This is in accordance with the dilution law which says that the number of moles of a solution before dilution is the same as after dilution.
Thus, the amount of NaOH needed to neutralize the vinegar will remain the same for a complete reaction since the number of moles of solute in the vinegar has not changed.
More on number of moles can be found here: https://brainly.com/question/14919968
#SPJ1
How many molecules of o2 are produced from 82g of h2o?
2na2o2 +2h2o= o2 +4naoh
Answer:
857.2947
Explanation:
You start with what you’re given 82g of H20 and multiply by 1 mole and the actual grams of h20 which is 18.0 then you do the mole. 1 mol of O2 and 2 mol of H2O times 6.02 x 10^23
What is the nuclear equation for decay of Am - 241
Americium is a radioactive element .
It goes through alpha decay during nuclear reactions .The nuclear reaction.is given by
[tex]\rm {}^{241}_{95}Am\longrightarrow {}^{237}_{93}Np+{}^4_2\alpha[/tex]
Np stands for NuptuniumHere alpha can be written as He too
A graduated cylinder is filled with 60.0 ml of water. A cube, made of aluminum, is carefully dropped into the cylinder. Aluminum has a density of 2.70 g/ml. The mass of the cube is 13.5 grams. What is the new volume in the graduated cylinder?
Answer:
65 ml
Explanation:
The aluminum will not float , so it will displace a volume of fluid equal to its volume.
13.5 gm / 2.7 gm/ml = 5 ml
the new graduated cylinder measurement will be 60 + 5 = 65 ml
What event might occur when favorable adaptations build up in a population over many generations?
starvation
extinction
migration
speciation
Answer:
D.) Speciation
Explanation:
A.) is incorrect because favorable traits becoming more widespread within a population usually means that the population is becoming better suited for its environment. Therefore, unless there are external factors, starvation is not a direct result of positive adaptations.
B.) is incorrect because the population is gaining adaptations that make their survival within an environment more likely, not less likely. Again, extinction is the opposite of what occurs when this happens.
C.) is incorrect because migration typically occurs when a population is experiencing hardships within their environment. This is what causes them to move somewhere else in order to increase their survival/reproductive success. As stated previously, favorable adaptations would make the population better suited for their current environment. These changes would discourage migration.
D.) is correct because speciation occurs when a population changes so much over generations to the point in which they become another species entirely. If a population undergoes numerous positive adaptations, they will become more and more fit for their environment. This newfound fitness and these changes may be so drastic that the population becomes too different to classify them the same way they once were.
Answer:
D. speciation
Explanation:
took the test
Why is the spectrum from our sun a combination of spectral types?.
The purpose of cracking in the production of ethene is to
O condense light molecules into large molecules
O evaporate the lightest molecules from the mixture
O convert large molecules into small molecules
convert small molecules into large molecules
The purpose of cracking in the production of ethene is to convert large molecules into small molecules.
Ethene can be produced from the thermal cracking of ethane and propene.
In thermal cracking, high temperature of about 750-850°C and pressure of up to about 70 atm is used to break carbon-carbon bonds. Free radicals are formed in the process.
More about petroleum refining processes:
Petroleum refinery can be classified into two broad categories, namely the main refining processes and conversion processes. Main refining processes includes distillation, absorption and adsorption, while conversion processes involves thermal cracking, catalytic cracking and hydrocracking.
As the name implies, cracking is generally the breaking up of larger molecules into smaller, more useful molecules, such as those with 5 to 12 carbons.
To better comprehend cracking processes, we can use the analogy of dropping a ceramic mug.
When this ceramic mug is dropped, it breaks into smaller ceramic pieces. This represents smaller molecules being formed from a larger molecule. The force used to break them into smaller molecules would differ in the various types of cracking processes. For example, thermal cracking mainly uses heat while catalytic cracking mainly uses a zeolite catalyst.
Note that for these cracking processes to occur, there are other conditions involved.
Additional:
To learn more about cracking, do check out the following!
https://brainly.com/question/13565152Cleaning PDB from the test tube after the experiment could be a long and arduous process. Describe the procedure that you will use to clean PDB (and the unknown solid) from your test tube after your experiments are complete.
The unknown solid is removed by rinsing with water while the PDB is removed by rinsing with alcohol.
What are solvents?Solvents are substances which dissolve other substances to form solutions or mixtures.
Water is used as a solvent for inorganic substances while organic solvents such as alcohol or kerosene are used as solvents for organic substances such as PDB.
Alcohol is added to the test tube containing PDB, which then dissolves. The tube is rinsed with more alcohol until all the PDB dissolves.
Therefore, the unknown solid is removed by rinsing with water while the PDB is removed by rinsing with alcohol.
Learn more about solvents at: https://brainly.com/question/12665236
#SPJ2
2)a dish contains a blackish-yellow powder.when a magnet is moved over it black particles iron get stuck to the magnet and only yellow powder which is sulphur is left behind. was your original powder an element compound or mixture
Which of the following is true for the equilibrium constant of a reaction? (5 pc
OIts value remains constant at different temperatures.
It is a ratio of coefficients of reactants to products.
It is represented by the symbol K.
Its value is always less than 1.
The equilibrium constant of the reaction is represented by the symbol K. Thus, option C is the correct and accurate statement about the equilibrium constant.
What is the equilibrium constant?The equilibrium constant is a representation of the concentration of the products and the reactants of the reaction that is raised to the powers through their stoichiometry coefficient.
Its value varies and changes at different temperatures and is not always less than 1. The equilibrium constant is the ratio of the coefficient of the products to reactants.
Therefore, option C. equilibrium constant is represented by K is true.
Learn more about the equilibrium constant here:
https://brainly.com/question/12429748
#SPJ1
Describe the overall enthalpy of the chemical reactants compared to the enthalpy of the chemical products in the combustion of propane.
Answer:
A thermochemical equation for the combustion of propane (C3H8)(C3H8) is written as follows:
C3H8(l)+5O2(g)→3CO2(g)+4H2O(g);ΔH∘rxnC3H8(l)+5O2(g)→3CO2(g)+4H2O(g);ΔHrxn∘ = -2202.0 kJ/mol
The value given for ΔH∘rxnΔHrxn∘ means that:
a. the reaction of one mole of propane absorbs 2202 kJ of energy from the surroundings.
b. the reaction is endothermic.
c. the enthalpy of formation of propane is 2202 kJ/mol.
d. the reaction of one mole of propane releases 2202 kJ of energy to the surroundings.
e. None of these.
In general the formation of a chemical bond lowers the _____ energy of a chemical system, leading to a _____ stable arrangement.
In general, the formation of a chemical bond lowers the potential energy of a chemical system, leading to a more stable arrangement.
What is potential energy?Stored energy depends upon the relative position of various parts of a system.
In bond formation, atoms lose their potential energy to attain stability and heat is evolved. The bond formation is an exothermic reaction.
Atoms bond together to form compounds to attain lower energies than they possess as individual atoms.
A quantity of energy is equal to the difference between the energies of the bonded atoms and the energies of the broken atoms.
Learn more about the potential energy here:
https://brainly.com/question/24284560
#SPJ1