You have 900,000 atoms of a radioactive substance. After 3 half-lives have past, how many atoms remain? Remember that you cannot have a fraction of an atom, so round the answer to the nearest whole number.

The low solubility of KHT is likely a result of an unfavorable ∆H° value. This is because KHT is a relatively large and complex molecule, which means that breaking apart its solid structure requires a significant amount of energy.

Additionally, the molecule contains multiple hydrogen bonds, which are relatively strong intermolecular forces. These factors contribute to a relatively large positive ∆H° value, which makes it energetically unfavorable for KHT to dissolve in water.

On the other hand, the ∆S° value for the dissolution of KHT is likely not a major contributing factor, as the process does not involve a significant change in the degree of disorder or randomness of the system. The unfavorable ∆H° means that energy is absorbed during the dissolution, making the process less favorable and leading to low solubility.

Learn more about solubility here:

https://brainly.com/question/28170449

#SPJ11

The ratio of [[tex]CH_{3}CO_{2}H_{}[/tex]]/[[tex]CH_{3}CO_{2}^{-2}[/tex]] in the buffer is approximately 1:4.07.

To determine the ratio of the concentrations of [tex]CH_{3}CO_{2}H_{}[/tex] to [tex]CH_{3}CO_{2}^{-2}[/tex], we can use the Henderson-Hasselbalch equation:
pH = p[tex]K_{a}[/tex] + log ([A-]/[HA])
Where pH is the given pH of the buffer (5.35), [tex]K_{a}[/tex] is the negative logarithm of the Ka value, [A-] represents the concentration of the acetate ion [tex]CH_{3}CO_{2}^{-2}[/tex], and [HA] represents the concentration of acetic acid [tex]CH_{3}CO_{2}H_{}[/tex]).
First, we need to find the p[tex]K_{a}[/tex]:
p[tex]K_{a}[/tex] = -log([tex]K_{a}[/tex]) = -log(1.80 × 10^-5) ≈ 4.74
Now we can plug in the values into the Henderson-Hasselbalch equation:
5.35 = 4.74 + log ([tex]CH_{3}CO_{2}^{-2}[/tex]/[tex]CH_{3}CO_{2}H_{}[/tex])
Next, we need to isolate the ratio of concentrations:
0.61 = log ([tex]CH_{3}CO_{2}^{-2}[/tex]/[tex]CH_{3}CO_{2}H_{}[/tex])
Now, use the inverse log ([tex]10^{x}[/tex]) to find the ratio:
[tex]10^{0.61}[/tex]≈ 4.07
Therefore, the ratio of the concentration of [tex]CH_{3}CO_{2}H_{}[/tex]to [tex]CH_{3}CO_{2}^{-2}[/tex] is approximately 1:4.07.

Learn more about  buffer here: https://brainly.com/question/28299784

#SPJ11

1. The transformation that occurs when solid ammonium sulfate dissolves in water is: (NH₄)₂SO₄(s) → 2 NH₄⁺(aq) + SO₄²⁻(aq). 2. The transformation that occurs when solid lead nitrate dissolves in water is:

Pb(NO₃)₂(s) → Pb²⁺(aq) + 2 NO₃⁻(aq)

1. When solid ammonium sulfate dissolves in water, the individual ions of ammonium and sulfate dissociate from each other and become surrounded by water molecules, resulting in the formation of ammonium cations and sulfate anions in aqueous solution.

This is because ammonium sulfate is a strong electrolyte, meaning it dissociates completely in water to form ions that can conduct electricity.

2. When solid lead nitrate dissolves in water, the individual ions of lead and nitrate dissociate from each other and become surrounded by water molecules, resulting in the formation of lead cations and nitrate anions in aqueous solution.

This is because lead nitrate is also a strong electrolyte, meaning it dissociates completely in water to form ions that can conduct electricity.

To know more about  transformation, refer here:
https://brainly.com/question/13865881#
#SPJ11

The equilibrium expression for the reaction 2Na2O(s) ⇌ 4Na(l) + O2(g) is represented by Kc = [O2]^x

Chemical equilibrium occurs when the rate of the forward reaction equals the rate of the reverse reaction, and the concentrations of the reactants and products remain constant over time. For the given reaction, we can represent the equilibrium constant (Kc) using the concentrations of the products and reactants raised to the power of their stoichiometric coefficients. However, since equilibrium constants only consider gases and aqueous solutions, the expression will exclude solid and liquid species. Therefore, the equilibrium expression for this reaction is: Kc = [O2]^x

Here, [O2] represents the concentration of oxygen gas (O2) in the equilibrium mixture, and x is the stoichiometric coefficient of O2 in the balanced equation, which is 1. The reaction involves the decomposition of solid sodium oxide (2Na2O) into liquid sodium (4Na) and gaseous oxygen (O2). Due to the exclusion of solid and liquid species from the equilibrium expression, only the concentration of oxygen gas is considered in the equilibrium constant calculation. In conclusion, the equilibrium expression for the reaction 2Na2O(s) ⇌ 4Na(l) + O2(g) is represented by Kc = [O2]^x

Learn more about chemical equilibrium at:

https://brainly.com/question/5537989

#SPJ11

Yes, acids can be considered as fine chemicals.

Yes, acids can be considered as fine chemicals. Fine chemicals are pure and complex chemical substances, produced in relatively small quantities with high purity and quality standards. Acids, such as sulfuric acid, hydrochloric acid, nitric acid, acetic acid and phosphoric acid are widely used in the chemical industry as intermediates or raw materials in the production of a wide range of fine chemicals.

Many acids are also used in various industrial processes, such as electroplating, etching, and metal cleaning. Therefore, acids play a crucial role in production of fine chemicals and are considered as essential class of chemicals in the chemical industry.

To know more about chemicals, refer

https://brainly.com/question/29886197

#SPJ1

To solve for the pH of the solution, we need to use the Ka expression for HClO and set up an ICE table to determine the concentrations of H3O+ and ClO- in the solution.

Ka = [H3O+][ClO-]/[HClO], Let x be the concentration of H3O+ and ClO- formed from the dissociation of HClO.
Ka = x^2 / (0.100 - x).

Assuming x is much smaller than 0.100, we can simplify the denominator to 0.100, 2.9 × 10−8 = x^2 / 0.100

Solving for x, we get: x = 1.7 × 10−5 M
The concentration of H3O+ in the solution is the same as x, which is 1.7 × 10−5 M.

To determine the pH, we take the negative logarithm of the H3O+ concentration: pH = -log(1.7 × 10−5) = 4.77
Therefore, the pH of the solution with 0.100 M HClO and 0.075 M NaClO is 4.77.

To know more about concentrations click here

brainly.com/question/29072206

#SPJ11

The balanced equation for the half-reaction that takes place at the cathode (reduction) is:

H2(g) + 2OH⁻(aq) + 2e⁻ → 2H2O(l)

The balanced equation for the half-reaction that takes place at the anode (oxidation) is:

Zn(s) → Zn²⁺(aq) + 2e⁻

To calculate the cell voltage under standard conditions, the equation is:
E°cell = E°cathode - E°anode

From the ALEKS Data tab, we can find the standard reduction potential for;

Cathode half-reaction = 0.83 V

Anode half-reaction = -0.76 V.

Substituting these values into the equation, we get:

E°cell = 0.83 V - (-0.76 V)

         = 1.59 V
This is the round-off answer up to 2 decimal places.

Therefore, the final answer is 1.59 V as the cell voltage under standard conditions.

https://brainly.com/question/31485865

#SPJ11

The general process of drawing products and differentiating between higher and lower molecular weight products in a reaction.

To draw the products of a given reaction, follow these steps:

1. Identify the reactants and their molecular structures.
2. Determine the type of reaction occurring (e.g., addition, substitution, elimination).
3. Predict the products based on reaction mechanisms and the specific reactants involved.
4. Draw the molecular structures of the products.

To differentiate between the higher molecular weight product and the lower molecular weight product:

1. Calculate the molecular weight of each product by adding up the atomic weights of the constituent elements.
2. Compare the molecular weights of the products.
3. Identify the product with the higher molecular weight and the product with the lower molecular weight.

To know more about atomic weights click on below link:

https://brainly.com/question/19756221#

#SPJ11

Individuals who sporadically engage in physical activity without form, structure, or consistency are in the " Precontemplation" stage of change.
The correct answer is b.

Individuals in the pre-contemplation stage of the Transtheoretical Model of Behavior Change have no intention of changing their behavior in the near future.

They may be unaware of the need for change or may feel resigned to their current behavior. In terms of physical activity, individuals in this stage may engage in sporadic or irregular activity, but they are not yet considering making exercise a regular part of their lifestyle.

Therefore option b is correct.

Learn more about behavior:

https://brainly.com/question/1741474

#SPJ11

The final product of the given synthetic transformation would be 2-ethyl-1-butene.

This step results in the formation of 2-ethyl-1-butene as the final product.

To know more about deprotonation click here:

https://brainly.com/question/30298709

#SPJ11

The reaction between galactose and glucose is a condensation reaction, resulting in the formation of lactose and water.

Based on the provided information, we can conclude that the reaction is a condensation reaction between galactose and glucose, forming lactose and water as products.

1. Identify the reactants: In this case, the reactants are galactose and glucose, which are both monosaccharides (simple sugars).

2. Identify the products: The products are lactose, which is a disaccharide, and water.

3. Analyze the reaction: Since the reaction involves the combination of two monosaccharides to form a disaccharide and water, we can conclude that it's a condensation reaction, also known as a dehydration synthesis reaction. This type of reaction occurs when two molecules combine, and a water molecule is removed in the process.

In summary, the reaction between galactose and glucose is a condensation reaction, resulting in the formation of lactose and water.

More on condensation reaction: https://brainly.com/question/31322120

#SPJ11

The energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 0.2 KJ/mol.

The total energy difference between the two conformations can be calculated by adding the Letimes energy to the energy difference between [H<--->H]eclipsed and [H<--->CH3]eclipsed, and subtracting the energy difference between [CH3<--->CH3]gauche and [H<--->CH3]eclipsed.

Thus, the total energy difference is:

Letimes + [H<--->CH3]eclipsed - [CH3<--->CH3]gauche - [H<--->H]eclipsed

= 11 KJ/mol + 6 KJ/mol - 3.8 KJ/mol - 4 KJ/mol

= 9.2 KJ/mol

Therefore, the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 9.2 KJ/mol. However, the question asks for the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations only.

Therefore, we need to subtract the energy difference between [H<--->CH3]eclipsed and [CH3<--->CH3]gauche to get the answer:

[H<--->H]eclipsed - [CH3<--->CH3]gauche = 4 KJ/mol - 3.8 KJ/mol = 0.2 KJ/mol

Hence, the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 0.2 KJ/mol.

For more questions like Energy click the link below:

https://brainly.com/question/12807194

#SPJ11

Combustion is a chemical reaction in which a substance reacts with oxygen to produce heat and light. Gasoline is a mixture of hydrocarbons, including octane ([tex]C_{8} H_{18}[/tex]). The process of combustion involves the breaking of chemical bonds in the fuel molecules and the formation of new bonds with oxygen molecules.

To calculate the Hrxn for the combustion of octane, one approach is to use average bond energies, which are based on the energy required to break and form bonds. Another approach is to use enthalpies of formation, which are based on the energy required to form a compound from its constituent elements.
The percent difference between the two results can vary depending on the accuracy of the data used and the assumptions made in the calculations. However, in general, enthalpies of formation are considered to be more accurate than average bond energies because they take into account the specific conditions under which the reaction occurs, such as temperature and pressure. Enthalpies of formation also provide a more direct measure of the energy change involved in a reaction.
In summary, the Hrxn for the combustion of octane can be calculated using either average bond energies or enthalpies of formation. The percent difference between the results can vary, but enthalpies of formation are generally considered to be more accurate.

To know more about the combustion :

https://brainly.com/question/31123826

#SPJ11

To calculate the heat needed to raise the temperature of the copper layer, we can use the equation: Q = m * c * ΔT, Q is heat energy, m is mass of copper, c is specific heat capacity. 12,040 J of heat energy is needed to raise temperature of the copper layer from 25°C to 300°C.

In this case, we have m = 125 g, c = 0.387 J/g-K, ΔT = (300-25) = 275 K. Plugging in these values, we get: Q = (125 g) * (0.387 J/g-K) * (275 K) = 12,040 J

Therefore, 12,040 J of heat energy is needed to raise the temperature of the copper layer from 25°C to 300°C. The specific heat capacity of a substance is the amount of heat energy required to raise the temperature of one gram of that substance by one degree Celsius.

In this case, the specific heat capacity of copper is 0.387 J/g-K, which means that it takes 0.387 joules of heat energy to raise the temperature of one gram of copper by one degree Celsius.

Copper has a relatively high specific heat capacity compared to many other metals. This means that it takes more heat energy to raise the temperature of copper compared to other metals with lower specific heat capacities. This is why copper is often used in cookware, as it can absorb and distribute heat more evenly and effectively than other metals.

Know more about specific heat capacity here:

https://brainly.com/question/29766819

#SPJ11

The temperature of 2.50 moles of neon gas confined to a volume of 3.50 L at a pressure of 2.00 atm is approximately 66.56 degrees Celsius.

To find the temperature, in degrees Celsius, of 2.50 moles of neon gas confined to a volume of 3.50 L at a pressure of 2.00 atm, you can use the Ideal Gas Law equation:
PV = nRT

Where P is the pressure (in atm), V is the volume (in L), n is the number of moles, R is the Ideal Gas Constant (0.0821 L atm/mol K), and T is the temperature (in K).

Step 1: Plug in the given values:
(2.00 atm) * (3.50 L) = (2.50 moles) * (0.0821 L atm/mol K) * T

Step 2: Solve for T:
T = (2.00 atm * 3.50 L) / (2.50 moles * 0.0821 L atm/mol K) = 339.71 K

Step 3: Convert the temperature from Kelvin to Celsius:

Temperature (°C) = Temperature (K) - 273.15
Temperature (°C) = 339.71 K - 273.15 = 66.56 °C

To know more about Ideal Gas Equation:

https://brainly.com/question/12242461

#SPJ11

The bond dissociation energy for breaking all the bonds in a mole of methane (CH4) is 1640 kJ/mol.

To calculate the bond dissociation energy for breaking all the bonds in a mole of methane (CH4), you'll need to consider the bond dissociation energies for the C-H bond, which is provided in the table.

The methane molecule (CH4) has four C-H bonds. According to the table, the bond dissociation energy for a single C-H bond is 410 kJ/mol.

Step 1: Calculate the energy needed to break one molecule of methane by breaking all four C-H bonds:
Energy = 4 (C-H bonds) * 410 kJ/mol (bond dissociation energy for C-H)
Energy = 1640 kJ/mol

Step 2: Calculate the energy needed to break all the bonds in a mole of methane:
Energy = 1 mole of CH4 * 1640 kJ/mol

Therefore, the bond dissociation energy for breaking all the bonds in a mole of methane (CH4) is 1640 kJ/mol.

Learn more about bond dissociation energy at https://brainly.com/question/24301293

#SPJ11

The heat transfer (a) is 663.12 kJ and the entropy change is 1.21 kJ/K.(B)

In a polytropic process, we can use the following equations to find the heat transfer and entropy change:

1. For heat transfer (Q): Q = m * Cv * (T2 - T1)
2. For entropy change (ΔS): ΔS = m * Cv * ln(T2/T1)

Given: m_H2 = 5 kg, m_O2 = 4 kg, n = 1.6, T1 = 40°C = 313 K, T2 = 250°C = 523 K

First, we need to find the specific heat at constant volume (Cv) for the mixture:
Cv_mix = (m_H2 * Cv_H2 + m_O2 * Cv_O2) / (m_H2 + m_O2)

Using Cv_H2 = 10.16 kJ/kgK and Cv_O2 = 6.45 kJ/kgK:
Cv_mix = (5 * 10.16 + 4 * 6.45) / (5 + 4) = 8.312 kJ/kgK

Now, calculate (a) heat transfer:
Q = (5 + 4) * 8.312 * (523 - 313) = 663.12 kJ

Finally, calculate (b) entropy change:
ΔS = (5 + 4) * 8.312 * ln(523/313) = 1.21 kJ/K. (B)

To know more about polytropic process click on below link:

https://brainly.com/question/13001350#

#SPJ11

a)  1s2 2s2 3s1 incorrect, orbital should be full before 2s. (b) [Ne]2s2 2p3 is incorrect because there is imbalance, (c) [Ne]3s2 3d5 incorrect because orbital should be full after 4s.

(a) The electron configuration (1s2 2s2 3s1) is incorrect because the 3s orbital should be filled before the 2s orbital. (b) The electron configuration ([Ne] 2s2 2p3) is incorrect because there is an imbalance in the number of electrons in the 2s and 2p orbitals. The 2p orbital can accommodate a maximum of six electrons, but in this configuration, there are only five.

(c) The electron configuration ([Ne] 3s2 3d5) is incorrect because the 3d orbital should be filled after the 4s orbital.

In the ground state, atoms follow specific rules for electron configuration. Electrons fill orbitals in a specific order based on increasing energy levels. The Aufbau principle states that lower energy orbitals are filled before higher energy ones.

The Pauli exclusion principle states that each orbital can hold a maximum of two electrons with opposite spins. Hund's rule states that electrons occupy separate orbitals in the same subshell before pairing up. Following these rules, the correct electron configurations would be (a) 1s2 2s2 2p6 3s2, (b) [Ne] 2s2 2p6, and (c) [Ne] 3s2 3p6.

To learn more about electron configuration click here

brainly.com/question/29157546

#SPJ11

The conjugate base of the ammonium ion is amine, which is the acid. Ka = 1.58 x 10-10. pH equals -log(3.0g x 10")=5.51-10.11 CH₃)3NH₁: Concentration: 0.060 M. pH = 7.4 As a result, a trimethylamine solution with a concentration of 0.060 M has a pH of 7.4 and a concentration of (CH₃)3NH₁ of 0.060 M, respectively.

Ka = 1.58 x 10-10. = pH = -log(3.0g x 10")=5.51 10-11. The weak base trimethylamine, (CH₃)3N, has an ionisation constant, Kb, of 7.4 x 10-5.0.0025 M of hydronium ions are present. As a result, pH = log (0.0025) - (- 2.60) = 2.60.When titrating with 0.0500M KOH and 0.100M hydroxyacetic acid, the pH at the equivalence point is 8.18. Thus, we can determine from this that the base's ph is 11.69.

To know more about ammonium, click here:

https://brainly.com/question/10834028

#SPJ4

During the process of withdrawing one-half of the total mass of saturated liquid water from the 0.18-m rigid tank at 120°C, heat is transferred from a 230°C source to maintain a constant temperature in the tank. This results in the remaining water in the tank staying in the saturated liquid state at 120°C.

Regarding the 0.18-m rigid tank filled with saturated liquid water at 120°C, where one-half of the total mass is withdrawn in liquid form and heat is transferred from a 230°C source to maintain a constant temperature, please consider the following steps:

1. The initial state of the system is a saturated liquid water at 120°C.
2. The valve at the bottom of the tank is opened, allowing one-half of the total mass to be withdrawn in the liquid form. This reduces the mass of water in the tank by 50%.
3. During this process, heat is transferred to the water from a 230°C source to maintain the constant temperature of 120°C in the tank. This heat transfer compensates for the cooling effect caused by the withdrawal of liquid water.
4. Since the temperature in the tank remains constant at 120°C, the water remains in the saturated liquid state throughout the process.

Know more about temperature - brainly.com/question/27944554

#SPJ11

The pH of 0.203 M diethylammonium bromide, (C₂H₅)₂NH₂Br, is approximately 8.77.

Diethylammonium bromide is a salt of a weak base, diethylamine (C₂H₅)₂NH, and a strong acid, hydrobromic acid (HBr). When it is dissolved in water, it undergoes hydrolysis to form its respective weak base and strong acid. The diethylamine acts as a weak base, accepting a proton from water and generating hydroxide ions (OH⁻). The hydroxide ions increase the pH of the solution, making it basic.

The Kb value of diethylamine is 5.38 x 10⁻¹². Using this value, we can calculate the concentration of OH⁻ ions that are generated in the solution. The OH⁻ concentration is then used to calculate the pH of the solution using the equation pH = 14 - pOH.

To find the concentration of OH⁻ ions, we need to use the Kb expression:

Kb = [NH₂][OH⁻]/[NH₃⁺]

At equilibrium, [NH₂] = [OH⁻] and [NH₃⁺] = [(C₂H₅)₂NH₃⁺].

Therefore, Kb = [OH⁻]²/[(C₂H₅)₂NH₃⁺]

Solving for [OH⁻], we get [OH⁻] = sqrt(Kb x [(C₂H₅)₂NH₂Br]) = 1.50 x 10⁻⁴ M.

Using the equation pH = 14 - pOH, we get pH = 8.77. Therefore, the pH of 0.203 M diethylammonium bromide solution is approximately 8.77.

learn more about PH here:

https://brainly.com/question/15289714

#SPJ11

Answer:

To find the number of moles of the substance, Dawn will need to know the molar mass of the substance. The molar mass is the mass of one mole of the substance, expressed in grams per mole (g/mol).

Dawn can calculate the number of moles of the substance using the following formula:

moles = mass / molar mass

Where mass is the measured mass of the substance in grams.

To find the molar mass of the substance, Dawn will need to look up the atomic masses of the elements in the chemical formula of the substance, and multiply them by the number of atoms of each element in the formula. Then, she can add up the results to get the molar mass of the substance in g/mol.

Once Dawn has calculated the molar mass of the substance and measured its mass, she can use the formula above to calculate the number of moles of the substance.

Hope this helps!

Answer:

propane

Explanation:

the structure of propane

1. Acetylocholine binds sodium channels that are activated by ligands.

2. When sodium ions get inside the cell, an action potential starts.

3. The sarcolemma and T tubules carry an action potential.

From the sarcoplasmic reticulum, calcium ions are released in step 4.

5. Because calcium and troponin are bound together, tropomyosin moves.

6. Actin is bound by myosin.

7. Using ATP energy, myosin cross-bridges swing and detach in alternating fashion.

Actin is still being moved towards the M-line by myosin filaments in position 8.

Muscle contractions are regulated by calcium ions, troponin and tropomyosin proteins, AND the act of skeletal muscles contracting.

To know more about troponin, click here:

https://brainly.com/question/30506716

#SPJ4

The molarity of the CH3COOH (acetic acid) solution is  0.0638 M.

To find the molarity of the CH3COOH acid solution, we'll use the concept of molarity and the balanced chemical equation for the reaction between KOH and CH3COOH.

Step 1: Write the balanced chemical equation.
KOH + CH3COOH → KCH3COO + H2O

Step 2: Calculate moles of KOH used in the reaction.
Moles of KOH = Molarity × Volume (in liters)
Moles of KOH = 0.4519 M × (13.62 mL × 0.001 L/mL) = 0.006148958 moles

Step 3: Determine moles of CH3COOH reacting with KOH.
Since the reaction is 1:1, moles of CH3COOH = moles of KOH = 0.006148958 moles

Step 4: Calculate the molarity of the CH3COOH solution.
Molarity of CH3COOH = Moles of CH3COOH / Volume of CH3COOH solution (in liters)
Molarity of CH3COOH = 0.006148958 moles / (96.30 mL × 0.001 L/mL) = 0.06381758 M

The molarity of the CH3COOH (acetic acid) solution is approximately 0.0638 M.

For more problems on molarity - https://brainly.com/question/16617082

#SPJ11

The specific rotation of a freshly prepared solution of the α-form gradually decreases with time due to a phenomenon called mutarotation. The solutions of the and forms reach the same specific rotation at equilibrium because equilibrium mixture contains a constant ratio of these two forms, regardless of their initial concentrations

Mutarotation occurs when there is an interconversion between two anomeric forms of a sugar molecule, such as the α- and β-forms, in an aqueous solution. This interconversion leads to an equilibrium state in which both forms coexist, resulting in a change in the optical rotation of the solution.

The reason that solutions of the α- and β-forms reach the same specific rotation at equilibrium is because the equilibrium mixture contains a constant ratio of these two forms, regardless of their initial concentrations. This is due to the spontaneous interconversion of the anomeric forms, which depends on the thermodynamic stability of the molecules, and not on their initial concentrations. Therefore, at equilibrium, the specific rotation of the solution reflects the combined contributions of both the α- and β-forms, giving a constant value for the specific rotation regardless of the starting form.

Learn more about mutarotation at:

https://brainly.com/question/13265198

#SPJ11

In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.

Learn more about Lewis structure of hydrazine H2NNH2

brainly.com/question/29756061

#SPJ11

In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.

Learn more about Lewis structure of hydrazine H2NNH2

brainly.com/question/29756061

#SPJ11

The concentrations of H+, HCO₃-, and CO₃₂- in a 0.087 M H₂CO₃ solution are 3.06 x 10⁻⁴ M, 0.0867 M, and 4.06 x 10⁻⁶ M, respectively.

The dissociation reactions for carbonic acid (H₂CO₃) are as follows:

H₂CO₃ ⇌ H+ + HCO₃- (Ka₁ = 4.45 x 10⁻⁷)

HCO₃- ⇌ H+ + CO₃₂- (Ka₂ = 4.69 x 10⁻¹¹)

Let x be the concentration of H+ in the solution. Then, the concentration of HCO₃- is (0.087 - x) and the concentration of CO₃₂- is equal to the concentration of H+.

Using the first dissociation equation, we can write the equilibrium expression:

Ka1 = [H+][HCO₃-]/[H₂CO₃]

Substituting the values and simplifying, we get:

4.45 x 10⁻⁷ = x(0.087 - x)/0.087

Solving for x, we get:

x = 3.06 x 10⁻⁴ M

Therefore, the concentration of H+ in the solution is 3.06 x 10⁻⁴ M.

Using the second dissociation equation, we can write the equilibrium expression:

Ka₂ = [H+][CO₃₂-]/[HCO₃-]

Substituting the values and simplifying, we get:

4.69 x 10⁻¹¹ = x²/(0.087 - x)

Since the concentration of CO₃₂- is equal to the concentration of H+, we can simplify the equation as:

4.69 x 10⁻¹¹ = x²/0.087

Solving for x, we get:

x = 4.06 x 10⁻⁶ M

Therefore, the concentration of CO₃₂- in the solution is 4.06 x 10⁻⁶ M.

To find the concentration of HCO3-, we can use the equation:

[HCO₃-] = 0.087 - [H+] - [CO₃₂-]

Substituting the values, we get:

[HCO₃-] = 0.087 - 3.06 x 10⁻⁴ - 4.06 x 10⁻⁶

[HCO₃-] = 0.0867 M

Therefore, the concentration of HCO₃- in the solution is 0.0867 M.

In summary, the concentrations of H+, HCO₃-, and CO₃₂- in a 0.087 M H₂CO₃ solution are 3.06 x 10⁻⁴ M, 0.0867 M, and 4.06 x 10⁻⁶ M, respectively.

Learn More about concentrations

https://brainly.com/question/28564792

#SPJ4

If the volume of the carbon dioxide sample at 357 k is 779.1 ml the temperature at 529.8 ml is 310.3 K.

The ideal gas law states that PV=nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature. The number of moles of carbon dioxide does not change, so the equation can be rearranged to T = PV/nR.

By replacing P with 1 and nR with 0.0821 L*kPa/mol*K, the equation becomes T = V/0.0821. Therefore, to find the temperature at 529.8 ml, the volume was plugged into the equation and multiplied by 0.0821. The result was 310.3 K.

Learn more about carbon dioxide at: https://brainly.com/question/22963529

#SPJ11

The symbol of the period 2 element with the given successive ionization energies is C (Carbon).

The successive ionization energies refer to the amount of energy required to remove successive electrons from an atom or ion. The increasing values indicate that it becomes increasingly difficult to remove electrons from the element, which is consistent with the trend of increasing ionization energy from left to right across a period in the periodic table.

Step 1: Look for a significant increase in ionization energy.
A significant increase in ionization energy occurs between IE4 and IE5, which indicates that the element has 4 valence electrons.

Step 2: Identify the element based on the valence electrons and period number.
Since the element is in period 2 and has 4 valence electrons, it is a member of Group 14 (or Group IV).

Step 3: Determine the element's symbol.
The period 2 element in Group 14 is Carbon, and its symbol is C.

To know more about Ionization Energy:

https://brainly.com/question/31132087

#SPJ11