Answer:
the amount of valence electron, cna be found in the periodic table, which is called the atomic number which is top of the symbol
hope this helps!!! best fo luck to you
Which piece of information do you need to determine whether a hydrocarbon
is saturated or unsaturated?
A. The type of C-C bonds in the molecule
B. The number of C-C bonds in the molecule
C. The type of C-H bonds in the molecule
D. The number of C-H bonds in the molecule
Answer:
A
Explanation:
Saturated means all the carbon atoms has four single bonds around it. These bonds are strong and won't break easily therefore saturated hydrocarbons aren't very reactive
Unsaturated means in one instance the C has a double bond with another carbon. This double bond can be easily broken therefore making unsaturated compounds more reactive than saturated compounds
So saturation deals with the type of bonds the carbon has with other carbon atoms. (The C-C bonds)
20. Show a correct numerical setup for calculating the molarity of the KOH * (aq) solution. Then state the calculated value of the molarity .
Answer:
[tex]M_b = \frac{0.10M * 9.50mL}{3.80mL}[/tex] ---- The setup
[tex]M_b = 0.25M[/tex] --- The molarity of KOH
Explanation:
Given
I will answer the question with the attached titration data
Required
The set and the value of the molarity of KOH
First, calculate the volume of acid (HCL) used:
[tex]V_a = Final\ Reading - Initial\ Reading[/tex]
[tex]V_a = 25.00mL - 15.50mL[/tex]
[tex]V_a = 9.50mL[/tex]
Calculate the final volume of base (KOH) used:
[tex]V_b = Final\ Reading - Initial\ Reading[/tex]
[tex]V_b = 8.80mL - 5.00mL[/tex]
[tex]V_b = 3.80mL[/tex]
The numerical setup is calculated using::
[tex]M_a * V_a = M_b * V_b[/tex]
Where
[tex]V_a = 9.50mL[/tex]
[tex]V_b = 3.80mL[/tex]
[tex]M_a = 0.10M[/tex] --- the given molarity of HCL
So, we have:
[tex]M_a * V_a = M_b * V_b[/tex]
[tex]0.10M * 9.50mL = M_b * 3.80mL[/tex]
Make Mb the subject
[tex]M_b = \frac{0.10M * 9.50mL}{3.80mL}[/tex] ---- The correct numerical setup
The solution is then calculated as:
[tex]M_b = \frac{0.10M * 9.50mL}{3.80mL}[/tex]
[tex]M_b = \frac{0.10 * 9.50}{3.80}M[/tex]
[tex]M_b = \frac{0.95}{3.80}M[/tex]
[tex]M_b = 0.25M[/tex]
Which is the most likely way an automotive engineer would use chemistry?
A. By testing the maximum speed and stopping distance of a new
car
B. By doing market research to determine which types of cars
consumers want
C. By designing cars that are more aerodynamic
D. By making parts that reduce the pollutants cars emit
Answer:
by making parts... emit
4 NH3 + 7 O2 → 4 NO2 + 6 H2O What is the mole ratio between oxygen and nitrogen dioxide? 7 moles to 6 moles 4 moles to 6 moles 7 moles to 4 moles 4 moles to 4 moles
Answer:
7:4
Explanation:
O2 : NO2
7 : 4
hope this helps :)
The ideal gas law equation is: PV = nRT
Use the ideal gas law to calculate the moles of gas in a container that has a pressure
of 700kpa, volume of 2L and a temperature of 450K.
Answer:
The answer is the first option 0.37 moles
Explanation:
the ideal gas law is PV = nRT, so in the terms of n,
n = PV/RT (divide both sides by RT to let n stand alone)
given: P = 700 kpa, V = 2L, T = 450 K , R = 8.31
n = (700 * 2) / (8.31 * 450)
= 1400/3739.5
= 0.34
What is the percent composition by mass of nitrogen in the compound NH3 (gram-formula mass - 17 g/mol)?
A.18%
B.25%
С.75%
D.82%
Which of the following would increase the pressure of a gas?
Answer:
What are the answer choices????
Answer:
An increase in the number of gas molecules in the same volume container increases pressure. A decrease in container volume increases gas pressure. An increase in temperature of a gas in a rigid container increases the pressure.
Explanation:
Increasing the temperature would increase the pressure on the system
The aximuthal quantum number of an orbital is 3. What are the possible values of m?
For a given valye of l(l shell), values of m are from -l to 0 to l, so m could be; -3, -2, -1, 0, +1, +2, +3.
Easyy!
the value of m is equal to 2l+1 so there must beseven values for m.
m can have values from -l through zero to +l so the values are -3, -2, -1, 0, +1, +2 and +3.
(02.01 MC) Which state of matter does this model represent?
O Solid
O Liquid
O Gas
O Plasma
Answer:
Hello There!!
Explanation:
I believe the answer is O Gas.
hope this helps,have a great day!!
~Pinky~
30. Which two notations represent atoms that are isotopes of the same
element?
A) 31 Sn and 30°Sn
B) 581 Sn and 13 Sn
C) 3°O and LOF
D) 19 Cl and 18K
Answer: 581 Sn and 13 Sn
Explanation:
581 Sn and 13 Sn are both Sn which are the same element with different masses. Isotopes are same element with different masses and the elements can have different masses because of different number of neurons
Compound A reacts with alcoholic KOH to yield compound B which on ozonolyzises followed by the reaction with Zn/H2O gives methanal and propanal Compound A is
Answer:
1-chlorobutane
Explanation:
Given that :
-- The compound A is made to react with alcoholic KOH and produce compound B.
-- The compound B on Ozonolysis produces methanol as well as propanol
The compound A should be a haloalkanes as treatment of haloalkanes with the alcoholic KOH, it will give alkene.
[tex]$CH_3CH_2CH_2CH_2Cl+KOH( \text{alcohol}) \rightarrow CH_3CH_2CH=CH_2+KCl+H_2O$[/tex]
So, the compound B should be Butene
Now the ozonolysis of the compound B or butene will give methanol and propanal as shown :
[tex]$CH_3CH_2CH=CH_2 \rightarrow CH_2O+CH_3CH_2CHO$[/tex]
Therefore, the compound A is 1-chlorobutane.
Perform the following
mathematical operation, and
report the answer to the correct number of significant figures.
7.68 x 4.564 = [?]
Which of the following describes the motion of water molecules in ice?
A. They do not move at all.
B. They are vibrating slightly.
C. They move the same as in a liquid.
D. They move faster than in a liquid.
B. They are vibrating slightly
Explanation:
This is because the particles are really close together and they vibrate on the spot.
Hope this is useful
What the larger number in the block of an element in the periodic table
Answer:
f-block
Explanation:
Can you identify what object is being represented by the model on the right? A. Arc of a circle B. Amount of radiation C. Area of a circle
Answer:
C area of a Circle.
Explanation:
Got it right. Edg2021.
Answer:
C
) area of a circle
Explanation:
edge 2023
I need to know the coefficient order
Explanation:
in mathematics use Pascal triangle
If you could somehow travel inside an atom and look around, what part of the atom would you want to look at? What would you want to understand better as a result of your "travels"? Write your answers in 2-3 paragraphs.
Answer:
See explanation
Explanation:
The interior of the atom is composed of electrons which move around in orbits and the nucleus. The nucleus contains protons and neutrons. The electrons are negatively charged while the protons are positively charged, the neutrons have no charge at all.
The atom is held together by electrostatic interaction between the electrons and protons in the nucleus. The protons and neutrons account for most of the mass of the atom.
The greatest wonder that I will like to really understand in the interior of the atom is the nature of the interaction between the neutrons and protons in the atomic nucleus which holds the nucleons together. The neutrons have no charge while the protons are positively charged. What sort of interaction could exist between an uncharged particle and a charged particle? That is what I will like to understand better as a result of my travels into the interior of the atom.
Answer:
help
Explanation:
Angiosperms produce brightly colored blooms and sweet-smelling flowers. Why have angiosperms developed these adaptations? A. to ensure seed dispersal B. to keep predators from eating the plants C. to attract pollinators and help ensure fertilization D. to allow time for seed development
Answer:
C
Explanation:
Angiosperms have developed these adaptations because it attracts pollinators which helps the ecosystem grow.
What makes plants the beginning of the food chain?
please answer my question aswell as my last one!
Answer: A
Explanation:
i just took the quiz and it was right!
Scenario 1: Sarah, your lab partner, accidentally poured too much
sodium chloride (chemical) into a beaker. She wants to pour the rest back
into the original container. What should you do? Explain
Scenario 2: You notice that yout lab partner is chewing gum and using a
beaker as a cup to get water. He then takes a drink from the beaker. He
assures you that it is clean and you don't have to worry. Why is this
dangerous in lab? Explain.
Scenario 3: In lab, you are working with an open flame (a birthday
candle) and your friend calls you over to see new background picture on
his chromebook. What should you do? Explain
ch
Heat depends on which factor?
how fast the molecules are vibrating
O how big the molecules are
how close the molecules are together
O none of the above
Answer:
Hello There!!
Explanation:
I believe the answer is how fast the molecules are vibrating.
hope this helps,have a great day!!
~Pinky~
One way industrial chemists aim to improve manufacturing and sales is by manipulating extemal factors to increase the rate of the reaction.
As an industrial chemist you have been asked by the CEO of your company to propose conditions that will increase the rate of production of
acetaminophen (the active ingredient in Tylenols). In a well-written letter to the CEO include three possible methods for increasing the
reaction rate and explain why each proposed change will increase the reaction rate Justity your recommendations using scientinc principles
The chemical synthesis of acetaminophen C.H.NO, is represented by the following equation
There are several methods that can be employed to increase yield in the chemical synthesis of acetaminophen.
What is chemical synthesis?The term chemical synthesis has to do with the method of producing a chemical substance from other chemical substances.
It is usual in industrial chemistry to seek to optimize the yield of the target product. In the chemical synthesis of acetaminophen as shown in the image attached, the yield of the product can be increased by;
1) Removal of the ethanoic acid byproduct to drive the forward reaction
2) Increasing the concentration of each of the reactants to ensure that more product is obtained.
3) Operating the process at a higher temperature to ensure that reaction is more efficient.
Learn more about rate of reaction:https://brainly.com/question/13440548
#SPJ1
Adding a catalyst to a system at equilibrium lowers the activation energy required by a system, which system, which shifts the equilibrium position toward the products.
True or false?
Answer: False
Explanation: Took the test
Answer:
False
Explanation:
What is used to describe the conditions of a reaction at equilibrium?
O A. A reaction-rate constant
O B. An activation energy
O C. An ideal gas constant
O D. An equilibrium constant
SUBM
Something that can be broken down by living organisms is
a.
biodegradable.
c.
ecological.
b.
economic.
d.
renewable.
Please select the best answer from the choices provided
A
B
C
D
Answer:
hii
needed points
Hydrogen and nitrogen react to form ammonia. The chemical equation for this reaction is shown here. 3 H2(g) + N2(g) 2 NH3(g). What amount of hydrogen will produce 44.0 mol of ammonia?
66.0 mol
88.0 mol
132.0 mol
29.3 mol
Answer:
someone already answered but i think it's 132.0 mol too
What is the limiting reactant in a reaction where 10.0 mol of iron is treated with 12.0 mol of bromine? The product that forms is FeBr3. First, write and balance the chemical equation. Next, calculate the moles of FeBr3 that can be made from 10.0 mol of Fe. Then calculate the moles of FeBr3 that can be made from 12.0 mol of bromine. The smaller amount of FeBr3 reveals the limiting reactant.
Answer: The limiting reagent in the reaction is bromine.
Explanation:
Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.
Excess reagent is defined as the reagent which is left behind after the completion of the reaction.
Given values:
Moles of iron = 10.0 moles
Moles of bromine = 12.0 moles
The chemical equation for the reaction of iron and bromine follows:
[tex]2Fe+3Br_2\rightarrow 2FeBr_3[/tex]
By the stoichiometry of the reaction:
If 3 moles of bromine reacts with 2 moles of iron
So, 12.0 moles of bromine will react with = [tex]\frac{2}{3}\times 12.0=8moles[/tex] of iron
As the given amount of iron is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.
Hence, bromine is considered a limiting reagent because it limits the formation of the product.
Thus, the limiting reagent in the reaction is bromine.
Witch part of an atom is mostly empty space?
How does a nuclear reactor produce electricity
Answer:
Explanation:
Nuclear reactors are the heart of a nuclear power plant. They contain and control nuclear chain reactions that produce heat through a physical process called fission. That heat is used to make steam that spins a turbine to create electricity. Nuclear power plants use heat produced during nuclear fission to heat water. The heat produced during nuclear fission in the reactor core is used to boil water into steam, which turns the blades of a steam turbine. As the turbine blades turn, they drive generators that make electricity
What type of molecule is shown below?
A. Ether
B. Alcohol
C. Aldehyde
D. Ketone
The given molecule is an aldehyde with the formula HCHO. It is the simplest and primary aldehyde . Hence, option c is correct.
What are aldehydes ?Aldehydes are a class of organic compounds that contain a carbonyl group (a carbon double-bonded to an oxygen) at the end of a carbon chain. The general formula for an aldehyde is RCHO, where R is a substituent or side chain attached to the carbonyl group.
Aldehydes are often characterized by their distinctive odor, which can be described as pungent and irritating. Some common aldehydes include formaldehyde (used in building materials and as a disinfectant), acetaldehyde (found in alcoholic beverages), and benzaldehyde (used in food flavorings).
Aldehydes are important intermediates in many chemical reactions, and they are used in a variety of industrial and laboratory applications. They can be synthesized by the oxidation of primary alcohols or by the partial oxidation of hydrocarbons. The given compound is formaldehyde HCHO.
Find more on aldehydes:
https://brainly.com/question/30902678
#SPJ7