You are configuring a new system and want to use a RAID 0 array for the operating system using SATA disks and the RAID functionality built into the motherboard. Which of the following actions will you take as part of the configuration?

Answers

Answer 1

The action must be take as part of the configuration a new system using RAID 0 array for the operating system is load the RAID drivers during operating system installation.

What is RAID 0?

RAID 0 is one type of RAID that can be used in SSD disks including SATA disks or NVME disks. This function it to broken data into stripes and then each stripes will written simultaneously into two or more drives. The RAID 0 is not for redundant data but for increasing the speed.

Since it will broken data into multiple drives, then the RAID 0 drives must be loaded when the operating system is in installation process.

You question is incomplete, but most probably your full question was

You are configuring a new system and want to use RAID 0 array for the operating system using SATA disks and the RAID functionality built into the motherboard. Which of the following actions will you take as part of the configuration?

a. Set master/slave jumpers on the hard drives.

b. Set the disk mode to ACHI in the BIOS.

c. Set the disk mode to IDE in the BIOS.

d. Load the RAID drivers during operating system installation.

Learn more about RAID 0 here:

brainly.com/question/28759241

#SPJ4


Related Questions

How do you write print_num_pattern() in python

Answers

Answer:

Inside the function, you can write the code that generates the desired number pattern. This might involve using loops or other control structures to iterate over a range of numbers and print them out in the desired pattern.

After writing the code that generates the pattern, you can include a return statement if the function should return a value. If the function simply prints the pattern and does not return any value, you do not need to include a return statement.

Be sure to indent the code inside the function properly to indicate that it is part of the function.

For example:

def print_num_pattern(n):

 for i in range(1, n+1):

   for j in range(1, i+1):

     print(j, end=' ')

   print()

print_num_pattern(5)

This function takes an integer parameter n and uses nested loops to print out a number pattern like this:

1

1 2

1 2 3

1 2 3 4

1 2 3 4 5

You can definitely write print_num_pattern() in python with the help of a recursive function in order to reveal the particular output.

What is the significance of Python programming?

The significance of Python programming is determined by the fact that it has become a staple in data science, allowing data analysts and other professionals to use the language to conduct complex statistical calculations.

It also creates data visualizations, builds machine learning algorithms, manipulates and analyzes data, and completes other data-related tasks as well. Inside the function, you can definitely write the code that generates the desired number pattern.

def print_num_pattern(n):

for i in range(1, n+1):

for j in range(1, i+1):

print(j, end=' ')

print()

print_num_pattern(5).

Therefore, you can definitely write print_num_pattern() in python with the help of a recursive function in order to reveal the particular output.

To learn more about Python programming, refer to the link:

https://brainly.com/question/26497128

#SPJ2

A value-returning function is

Answers

Answer:

A function that returns a value is called a value-returning function. A function is value-returning if the return type is anything other than void . A value-returning function must return a value of that type (using a return statement), otherwise undefined behavior will result. Related content.

Design a function that accepts a list as an argument and returns the largest value in the list. The function should use recursion to find the largest item.
Create a list with numbers: 10, 20, 30, 40, 50, 60, 70, 80, 90.
Create a recursive function that takes a list as an argument. Pass created list to the recursive function.
Display the largest item.
Upload the .py file.

Answers

Using the knowledge of computational language in python it is possible to write a code that Design a function that accepts a list as an argument and returns the largest value in the list.

Writting the function:

def Largest(list):

if len(list) == 1:

return list[0]

else:

maxelement = Largest(list[1:])

return maxelement if maxelement > list[0] else list[0]

def main():

list=[10, 20, 30, 40, 50, 60,70, 80, 90]

print("Largest value is ",Largest(list))

if __name__ == '__main__':

main()

def Max(list):

   if len(list) <= 1:

       else:

           return list[0]

       else:

           m = Max(list[1:])

           return m if m > list[0] else list[0]

def main():

   list = eval(raw_input(" please enter a list of numbers: "))

   print("the largest number is: ", Max(list))

main()

See more about python at brainly.com/question/18502436

#SPJ1

Consider the processWords method. Assume that each of its two parameters is a string of length two or more. public void processWords (String wordi, String word2) { String strl = wordl.substring(0, 2); String str2 = word2.substring(word2.length() - 1); String result = str2 + strl; System.out.println(result.indexOf(str2)); } Which of the following best describes the value printed when processWords is called? A The value 0 is always printed. B The value 1 is always printed. The value result.length() - 1 is printed. D) A substring containing the last character of word2 is printed. E A substring containing the last two characters of word2 is printed.

Answers

It is always printed as 0. process open void ,Words (String wordi, String word2) (String wordi, String word2) System.out.println(result.indexOf(str2)); String result = str2 + strl; String strl = wordl.substring(0, 2); String str2 = word2.substring(word2.length() - 1);

Why Do We Process Text?

Unstructured text data is analyzed and sorted automatically through text processing to produce insightful results. utilizing the artificial intelligence (AI) areas of natural language processing (NLP) and machine learning.

Programming Parameters: What Are They?

Specifying Functions Formal parameters, also referred to as function parameters, are local variables created in the function declaration rather than the definition, and they serve as the locations where the values of the arguments given during function calls are stored.

To know more about processWords method visit:-

https://brainly.com/question/30077020

#SPJ4

Maximum Discount Product A department store maintains data on customers, products and purchase record in three tables CUSTOMER PRODUCT, and PURCHASE. The store manager wants to know which product is on maximum discount for each category. Write a query to print the following fields for each category, ordered by category, ascending Category, product ID and discourse for the product that has the maximum discoun in the category. In the case of multiple products having same maximum discount within a category, print the product with minimum product_id Table Schema CUSTOMER Name Type Description CUSTOMER_ID Integer A customer's ID in the inclusive range 1 S00). This is a primary key CUSTOMER NAME String A customer's name. This field contains between 1 and 100 characters (inclusive) RE 2% NTSC al 14 17 ESC N o DI D- Q $ A % 5 € N 3 6 CUSTOMER Name Description Type A customer's iD in the inclusive range 11 500). This is a primary CUSTOMER ID Integer key. CUSTOMER_NAME String A customer's name. This field contains between 1 and 100 characters (inclusive) CITY String A city name. This field contains between 1 and 50 characters (inclusive) STATE String A state name. This field contains between 1 and 50 characters (inclusive) PRODUCT Name Type Description NTSC 12 & 15 TI Z" 2 A $ 4 % 5 € 3 un 6 Lo N Description PRODUCT_ID Integer Aproucts in the inclusive range, 500). This is a primar key PRODUCT_NAME String A product's name. This field contains between 1 and 50 characters (inclusive) A category name of the product. This field contains between 1 and 50 characters (inclusive) The price of the product in the inclusive range

Answers

The cost of the item within the acceptable range


What is discount?
A discount is a sum of money deducted from the item's regular price. It is a strategy for bringing down the price of a good or service. Savings can be given in a variety of ways, such as percentage or flat-rate discounts or even free gifts with purchases. Discounts can be utilized to reward devoted consumers or entice customers to make larger purchases. Discounts are a fantastic strategy to increase revenue and sales.

, 0.01 - 1000) DISCOUNT Integer The discount of the product in the inclusive range, 0-100) PURCHASE Name Type Description CUSTOMER_ID Integer A customer's ID in the inclusive range 1 500). This is a foreign key that references CUSTOMER.CUSTOMER ID PRODUCT_ID Integer A product's ID in the inclusive range 1 500). This is a foreign key that references PRODUCT.PRODUCT ID QUANTITY Integer The quantity purchased by the customer in the inclusive range, 1 - 50) Answer: SELECT C.CATEGORY, P.PRODUCT_ID, MAX(P.DISCOUNT) AS MAX_DISCOUNT FROM CUSTOMER c JOIN PURCHASE p ON c.CUSTOMER_ID = p.CUSTOMER_ID JOIN PRODUCT p ON p.PRODUCT_ID = p.PRODUCT_ID GROUP BY C.CATEGORY, P.PRODUCT_ID ORDER BY C.CATEGORY ASC, MAX_DISCOUNT DESC, P.PRODUCT_ID ASC;

To learn more about discount
https://brainly.com/question/1548141
#SPJ4

The branch of computer science that studies computers in terms of their major functional units and how they work is known as computer organization. (T/F).

Answers

The branch of computer science that studies computers in terms of their major functional units and how they work is known as computer organization.is true.

What abbreviation is usually used to describe the computer's memory?The hardware in a computing device called RAM (Random Access Memory) stores the operating system (OS), application programs, and data that are currently in use so that the processor of the device may access them rapidly.When instructions are performed sequentially, they are acquired one at a time from memory and sent to the control unit where they are decoded and carried out. The component of a computer that stores and retrieves data and instructions is called memory. system element the primary housing for a computer's CPU, motherboard, memory, and other components. Motherboard. The computer's main circuit board, which is housed inside the system unit and to which all computer systems are connected components connect.

To learn more about computer organization refer to:

https://brainly.com/question/14241634

#SPJ4

a. Which of the following three JavaScript code segments displays the phrase:
winter winter winter wonderland experience being displayed? Choose CODE SEGMENT 1. CODE SEGMENT 2 or CODE SEGMENT 3 and record your answer in the textbox provided b. b. BRIEFLY EXPLAIN YOUR REASONING - record your answer in the textbox provided CODE SEGMENTI: CODE SEGMENT 2:

Answers

The phrase "Monsters of Halloween are coming" is shown as JavaScript code fragments.

What purpose does JavaScript serve?

JavaScript is a text-based programming language that can be used on both the client-side and the server-side to create interactive web pages. While HTML and CSS are the languages that give web pages structure and appearance, JavaScript adds interactive elements to internet pages that keep people interested.

JavaScript versus C++

C++ is a programming language, whereas JavaScript is a scripting language. A JavaScript script is interpreted, but a C++ program must be compiled and run. C++ is statically typed, but JavaScript is dynamically typed.

To know more about JavaScript visit:-

https://brainly.com/question/16698901

#SPJ4

which of the following is not considered a fundamental element that will materially alter a contract according to the cisg?

Answers

The following is not considered a fundamental element that will materially alter a contract according to the CISG:

Specification of the ship to be used for carriage

What is CISG?

The United Nations Convention on Contracts for the International Sale of Goods (Vienna, 1980) (CISG), which was the result of UNCITRAL's work on uniform sales law, is not only a widely ratified treaty but also the model for numerous regional and national laws.

The CISG, which addresses both contract formation and party obligations, carefully weighs the interests of the buyer and seller and offers a wide range of remedies in the event of non-performance.

The Convention on the Limitation Period in the International Sale of Goods is an addition to the CISG that deals with a complex and important area of sales law that is subject to vastly different treatment in various legal systems.

Learn more about CISG

https://brainly.com/question/15980446

#SPJ4

a programmer is creating an algorithm to display the cost of a ticket based on the information in the table. the programmer uses the integer variable age for the age of the ticket recipient. the boolean variable includestour is true when the ticket is for a guided tour and is false when the ticket is for general admission. which of the following code segments correctly displays the cost of a ticket? responses

Answers

Below is the following code segments which correctly displays the cost of a ticket.

Coding Part:

cost - 6

if age > 12

cos - cost plus 2

if includes tour

cost - cost 2

display cost

What is a Code segment?

In the field of computing, a code segment, also recognized as a text segment or simply text, is a portion of a computer file that includes object code or an analogous section of the program's address space which contains executable commands and directives information.

When a program is processed and executed, it is saved in a computer file, which contains object code. The code segment is one of the divisions of this object file, which when the program is stored in memory by the loader as a result of it possibly being carried out and implemented, a variety of memory segments are assigned for a specific purpose, equivalently to both segments in object code based computer files and also segments that are only required at run time during execution.

To learn more about Code segment, visit: https://brainly.com/question/25781514

#SPJ4

A user who is a member of the IT Support group has delegated rights to manage user and group objects in the Trainees OU. The user attempted to add user object found in the Trainees OU to a security group called IT Helpdesk that is located in IT OU. The user received an error message saying, "Insufficient access rights to perform this operation." What is the cause of this error message? The user is not a member of the Server operators group. The user does not have delegated rights to manage Trainees OU. The user does not have delegate rights to manage group objects in the IT OU. The user is not a member of the Remote Desktop users group.

Answers

(C) "The user does not have delegation privileges to manage group objects in the IT OU" is the cause of the error message in the given situation.

What is an error message?

When an unexpected issue arises, information is shown in the form of an error message, typically on a computer or other device.

Error messages are frequently shown using dialog boxes on contemporary operating systems with graphical user interfaces.

When user intervention is necessary, to show that the desired operation has failed, or to provide crucial cautions, error messages are employed (such as warning a computer user that they are almost out of hard disk space).

Error messages are a common sight in computing and are included in every operating system and piece of hardware.

An important problem in usability and other areas of human-computer interaction is proper error message design.

So, the cause of the error message in the given situation is: in the IT OU, the user lacks delegation rights to control group items.

Therefore, (C) "the user does not have delegation privileges to manage group objects in the IT OU" is the cause of the error message in the given situation.

Know more about an error here:

https://brainly.com/question/24254789

#SPJ4

Correct question:
A user who is a member of the IT Support group has delegated rights to manage user and group objects in the Trainees OU. The user attempted to add user object found in the Trainees OU to a security group called IT Helpdesk that is located in IT OU. The user received an error message saying, "Insufficient access rights to perform this operation." What is the cause of this error message?

(A) The user is not a member of the Server operators group.

(B) The user does not have delegated rights to manage Trainees OU.

(C) The user does not have delegate rights to manage group objects in the IT OU.

(D) The user is not a member of the Remote Desktop Users group.

Which of the following types of networking hardware is installed in a computer or server to connect to an ethernet switch using a Cat 6 cable?

Answers

A router or switch is installed on your computer or server and connected to an Ethernet switch using Cat 6 cables. An Ethernet cable physically connects AP to router or switch on wired LAN. This allows AP to access the Internet and other networks.

What is Cat6 cable used for?

Cat6 cables use twisted pair cables by default to minimize crosstalk and reduce noise from electrical interference. There are two types of twisted pair cables: shielded twisted pair (STP) and unshielded twisted pair (UTP).

Cat 6 cables are mainly used for computer networks reaching data transfer rates (DTR) of Gb, 1000 Mbit/s or 1 Gbit/s and above. Features include: It consists of four pairs of copper wires, all of which are used for data transmission.

Is CAT6 used for Ethernet?

CAT6 is a standardized twisted pair cable for Ethernet that is backward compatible with CAT5/5e and CAT3 cabling standards. Similar to CAT5e, CAT6 cable supports Gigabit Ethernet segments up to 100m, but can also be used in 10 Gigabit networks over limited distances.

To learn more about network cable visit:

https://brainly.com/question/21808066

#SPJ4

which of the following usually provides dhcp services to dynamically assign ip addressing information to wireless clients and connect the wireless network to the internal wired network and the internet?

Answers

Controllers usually provide DHCP services to dynamically assign IP addressing information to wireless clients and connect the wireless network to the internal wired network and the internet.

What is a wired network?

We all know that anything physically composed of cables is considered to be "wired." The choices include fiber optic cables, copper wire, and twisted pair cables. Wires are used in a wired network to connect computers, laptops, and other devices to the Internet or another network. Due to the use of one cable per device and the direct and uninterrupted data it provides, a wired network is nearly always quicker than a wireless one.

Four basic categories of wired media are prevalent today:

Twisted-pair cable is a shielded, copper-based kind.Copper-based coaxial cable: Coaxial.Unshielded, copper-based, twisted-pair cable: this is Ethernet.Fiber optic cable is made of glass or plastic.

To learn more about wired networks, use the link given
https://brainly.com/question/13103934
#SPJ4

can you speed up so the person in front right lane cant merge in front of you and there lane ends and they have to slam on the breaks

Answers

The driver of the car in the lane that is coming to an end must give way to the cars in the opposite lane. When merging, drivers must leave enough room for their car to cross across into the other lane.

Should you accelerate when merging?

To properly merge onto the highway after entering the on ramp, a vehicle must make an effort to pick up speed. The motorist should switch on their turn signal as they accelerate so that other drivers on the highway can see what they are about to do.

What should one do when someone tries to merge?

They need to go more slowly and, if necessary, halt altogether. "Drivers in the lane are exempt from the requirement to yield to merging traffic."

To know more about merging visit :-

https://brainly.com/question/29906903

#SPJ4

Assume that an array of integer values has been declared as follows and has been initialized.
int [] arr = new int[10];
Which of the following code segments correctly interchanges the value of arr[0] and arr[5]?
Question 10 options:
A)
int k = arr[5];
arr[0] = arr[5];
arr[5] = k;
B)
arr[0] = 5;
arr[5] = 0;
C)
int k = arr[0];
arr[0] = arr[5];
arr[5] = k;
D)
int k = arr[5];
arr[5] = arr[0];
arr[0] = arr[5];
E)
arr[0] = arr[5];
arr[5] = arr[0];

Answers

C) int k = arr[0]; arr[0] = arr[5]; arr[5] = k; code segments correctly interchanges the value of array arr[0] and arr[5]

What is array?

As opposed to defining distinct variables for each value, arrays are used to hold numerous values in a single variable. Set the data type (such as int) and the array name, followed by square brackets [], to construct an array.

To interchange the value of arr[0] and arr[5] in the array "arr", you can use the following code segment:

int k = arr[0];

arr[0] = arr[5];

arr[5] = k;

This code segment uses a temporary variable "k" to store the value of arr[0] before it is overwritten. It then assigns the value of arr[5] to arr[0] and the value of "k" (which is the original value of arr[0]) to arr[5]. This effectively swaps the values of arr[0] and arr[5].

Option (C) is the correct answer, as it correctly uses a temporary variable to store the original value of arr[0] before it is overwritten.

Option (A) is incorrect because it uses the wrong index for the temporary variable, resulting in the values of arr[0] and arr[5] being lost.

Option (B) is incorrect because it simply assigns new values to arr[0] and arr[5], rather than swapping their original values.

Option (D) is incorrect because it uses the wrong index for the temporary variable, resulting in the values of arr[0] and arr[5] being lost.

Option (E) is incorrect because it simply assigns the value of arr[5] to arr[0] and then overwrites it with the original value of arr[0], resulting in no change to the values of arr[0] and arr[5].

To know more about array checkout  https://brainly.com/question/19570024

#SPJ4

a type ii error occurs when: group of answer choices a bad lot is rejected a bad lot is accepted. a good lot is accepted a good lot is rejected.

Answers

When a subpar lot is accepted, a type II error happens. When testing hypotheses, the statistical phrase "type II error" is used to explain the error that results from failing to reject.

Why do type II errors occur?

Low statistical power in a test is the primary source of type II error. If the statistical test is too weak, a Type II error will happen. A Type I mistake can also result from sample size because it will have an impact on the test's results.

What does type II econometric mistake mean?

If a researcher rejects a null hypothesis that is actually true in the population, this is known as a type I error (false-positive); a type II error is when this happens (false-negative) occurs when a null hypothesis that is truly incorrect in the population is not rejected by the researcher.

To know more about Type II error visit:-

https://brainly.com/question/24320889

#SPj4

internet skills exercise 2

Answers

An example of internet skills on ways to  Identifying Internet Resources are:

Verify the domain name.Look at the source more closely.Look for further proof to support what you've discovered.Use specific sources just to spark further investigation.

What sources are there on the Internet?

All domain names, electronic addresses, unified resource locators (URLs), and other online resources are referred to as "internet resources." Internet resources include all domain names, e-mail addresses, URIs, blogs, social media platforms  and other comparable online resources.

Therefore, under this exercise one will be able to learn how to:

To launch a browser To modify a web browser's toolbarsTo modify the font size in a web browserTo access a Web page 3.5 To save a favorite Web page as a bookmark To copy a Web address or URL

Learn more about Internet Resources from

https://brainly.com/question/23897826
#SPJ1

internet skills exercise 2- Identifying Internet Resources

Rutgers issues you an RUID card when you enroll. Suppose technology existed so that you would swipe your ID card when you entered an exam room and an exam with a unique barcode is scanned and issued to you. You swipe the ID card again when you leave the exam room and the exam barcode is again scanned. Each swipe and scan collects and stores the following information: time of swipe, student name, student RUID number, the unique barcode of the exam issued to (or returned by) the student whose card was swiped. Assuming that no student is permitted to leave the exam room before they complete the exam and that each student works on the exam the entire time they are in the exam room and leaves the exam room immediately upon completion of the exam, which of the following could be determined using the information collected and only this information? Choose all that apply. O the student or students scoring the highest grade on the exam O the number of students taking less than one hour to complete the exam O the amount of time the exam issued to you was in your possession O whether or not a student answered all of the questions on the exam

Answers

The option "the amount of time the exam issued to you was in your possession" could be determined using the information collected and only this information.

By comparing the time of the first swipe with the time of the second swipe, the amount of time that the exam was in the student's possession could be calculated. This information could be useful for determining whether or not a student took longer than the allotted time for the exam or if there were any discrepancies in the timestamps.

It would not be possible to determine the student or students scoring the highest grade on the exam, the number of students taking less than one hour to complete the exam, or whether or not a student answered all of the questions on the exam using only the information collected through the swipe and scan of the ID cards. This information would need to be obtained through other means, such as grading the exams or collecting responses from the students.

Learn more about exam, here https://brainly.com/question/29657389

#SPJ4

which of the following govern how the network is configured and operated as well as how people are expected to behave on the network?

Answers

Answer:

There are several factors that can govern how a network is configured and operated, as well as how people are expected to behave on the network. Some examples of these factors include:

Network policies: These are guidelines and rules that dictate how the network should be configured and used. Network policies may cover topics such as security, access control, usage guidelines, and acceptable use policies.

Network architecture: The design and layout of the network, including the types of devices and technologies used, can have an impact on how the network is configured and operated.

Network protocols: Protocols are standards and rules that govern how devices on the network communicate with each other. Different protocols may be used for different types of communication, such as data transfer, routing, and security.

Industry standards: Industry standards are guidelines and best practices that are widely followed within a particular industry. These standards may dictate how networks should be configured and operated within that industry.

Legal and regulatory requirements: In some cases, networks may be subject to legal and regulatory requirements that dictate how they should be configured and operated. These requirements may vary depending on the location and industry of the network.

What result set is returned from the following query?
Select Customer_Name, telephone
from customers
where city in ('Boston','New York','Denver');

Answers

The result set that is returned from the query is:

The Customer_Name and telephone of all customers living in either Boston, New York or Denver.

What is query?

Data from a database is requested through a database query. The request needs to be expressed in a database table or set of tables using a language known as the query language. By doing so, the system is better able to comprehend and respond to the query.

A query is a request for information in traditional English. The same concept is referred to in computer programming, but data is retrieved from a database instead.

To make the database understand the query, though, a set of pre-defined code must be used when writing the query. This idea is also referred to as the query language.

Structured Query Language (SQL) is the industry standard for database management, but there are also other query languages like AQL, Datalog, and DMX that facilitate database communication.

Learn more about query

https://brainly.com/question/25694408

#SPJ4

Fill in the necessary reagents or products, from A through G, to complete each of the following reactions in the formation of 1-phenyl-2-butanol. A through G are single reagents or products, excluding any acid workup. A PB PBr3 B C D CH2N2 NaBH4 followed by H30+ DIBAL-H -78 °C

Answers

The effective reducer sodium borohydride. It is extremely efficient at converting aldehydes and ketones into alcohols, although not having the same potency as 1-phenyl-2-butanol.

Isomerism in geometry present in 1 phenyl 2 butene?

Due to the distinct substitutions made to the two double-bonded carbons in 1-phenyl-2-butene, it can display geometric isomerism.

What does 2-butanol's functional group look like?

The group of chemical substances referred to as secondary alcohols includes 2-butanol, also known as 2-butyl alcohol or 2-hydroxybutane. The typical structure of secondary alcohols is HOC(R)(R') (R,R'=alkyl, aryl), and they are substances that contain a secondary alcohol functional group. A tasteless substance, 2-butanol has no smell.

To know more about 1-phenyl-2-butanol visit :-

brainly.com/question/15315466

#SPJ4

When comparing controller-based networks and traditional networks what are some perceived benefits from a controller-based perspective?

Answers

Controller-based networks, also known as software-defined networking (SDN), offer a number of perceived benefits compared to traditional networks. Some of these benefits include:

Centralized control.Flexibility.Improved security.Better scalability.Enhanced visibility.

In a controller-based network, all network traffic is routed through a central controller, which makes it easier to manage and control the network. This can be especially beneficial in large, complex networks where it can be difficult to keep track of all the different devices and connections. By centralizing control of the network, it is easier to implement security measures such as firewall rules and access controls. This can help to improve the overall security of the network.

Learn more about Controller Based Network, here https://brainly.com/question/7582284

#SPJ4

Fill in the code in the following program.
Area of a circle is pi * r2.
public class Circle {
/** The radius of the circle */
private double radius = 1;
/** The number of the objects created */
private static int numberOfObjects = 0;
/** Construct a circle with radius 1 */
public Circle() {
numberOfObjects++;
}
/** Construct a circle with a specified radius */
public Circle(double newRadius) {
radius = newRadius;
_______________________;
}
/** Return radius */
public double getRadius() {
return radius;
}
/** Set a new radius */
public void setRadius(double newRadius) {
radius = (newRadius >= 0) ? newRadius : 0;
}
/** Return numberOfObjects */
public static int getNumberOfObjects() {
_______________________;
}
/** Return the area of this circle */
public double getArea() {
_______________________________;
}
}

Answers

Here is the code to fill in the blanks in the program:

public class Circle {

 /** The radius of the circle */

 private double radius = 1;

 /** The number of the objects created */

 private static int numberOfObjects = 0;

 /** Construct a circle with radius 1 */

 public Circle() {

   numberOfObjects++;

 }

 /** Construct a circle with a specified radius */

 public Circle(double newRadius) {

   radius = newRadius;

  numberOfObjects++;

 }

 /** Return radius */

 public double getRadius() {

   return radius;

 }

 /** Set a new radius */

 public void setRadius(double newRadius) {

   radius = (newRadius >= 0) ? newRadius : 0;

 }

 /** Return numberOfObjects */

 public static int getNumberOfObjects() {

  return numberOfObjects;

 }

 /** Return the area of this circle */

 public double getArea() {

   return Math.PI * radius * radius;

 }

}

In this program, the Circle class represents a circle with a specified radius. It has a number of methods that allow you to get and set the radius, get the number of objects that have been created, and calculate the area of the circle. The area of a circle is calculated as pi * r^2, where r is the radius of the circle. The constant Math.PI represents the value of pi in Java.

Learn more about code, here https://brainly.com/question/497311

#SPJ4

A recent study posed the question about whether Japanese managers are more motivated than American managers. A randomly selected sample of each was administered the Sarnoff Survey of Attitudes Toward Life (SSATL), which measures motivation for upward mobility. The SSATL scores are summarized below.American JapaneseSample size 211 100Mean SSATL Score 65.75 79.83Population Std Dev 11.07 6.41Judging from the way the data were collected, which test would likely be most appropriate?A. Related samples t-test for mean differenceB. Pooled-variance t-test for the difference in meansC. Independent samples Z-test for the difference in meansD. Related samples Z-test for mean difference

Answers

The null and alternative hypothesis according to the given information is as follows: (C) H0: A - J = 0 versus H1: A - J ≠0

What are null and Alternative hypotheses?

Any variation between the selected attributes that you observe in a collection of data is thought to be the result of chance, according to the null hypothesis.

For instance, any discrepancy between the average profits in the data and zero is caused by chance if the expected earnings for the gambling game are actually equal to zero.

The alternate response to your research question is the alternative hypothesis (Ha).

It asserts that the populace is affected.

Our research hypothesis and your alternate hypothesis are frequently identical.

So, the null and alternative hypothesis is:

H0: A - J = 0 versus H1: A - J ≠0

Therefore, the null and alternative hypothesis according to the given information is as follows: (C) H0: A - J = 0 versus H1: A - J ≠0

Know more about Alternative hypotheses here:

https://brainly.com/question/13045159

#SPJ4

Correct question:
Are Japanese managers more motivated than American managers? A randomly selected group of each were administered the Sarnoff Survey of Attitudes Toward Life (SSATL), which measures motivation for upward mobility. The SSATL scores are summarized below.

Referring to Table 10-1, give the null and alternative hypotheses to determine if the mean SSATL score of Japanese managers differs from the mean SSATL score of American managers.

a. H0: A - J≥0 versus H1: A - J < 0

b. H0: A - J ≤ 0 versus H1: A - J > 0

c. H0: A - J = 0 versus H1: A - J ≠0

d. H0 : A - J = 0 versus H1: A - J≠0

Layer 2 switch SW2 connects a Layer 2 switch (SW1), a router (R1), a DHCP server (S1), and three PCs (PC1, PC2, and PC3). All PCs are DHCP clients. Which of the following are the most likely DHCP Snooping trust state configurations on SW2 for the ports connected to the listed devices? (Choose two answers.)- The port connected to the router is untrusted.- The port connected to switch SW1 is trusted.- The port connected to PC1 is untrusted.- The port connected to PC3 is trusted.

Answers

The most likely DHCP snooping trust state configurations on SW2 for the ports connected to the listed devices are:

The port connected to switch SW1 is trusted.The port connected to PC3 is trusted.

In a typical network design, switch SW1 is likely to be connected to other switches and devices in the network, and these devices may be acting as DHCP servers. As a result, SW2 would need to trust the port connected to SW1 in order to allow these DHCP servers to communicate with the DHCP clients on SW2. PCs are typically DHCP clients and do not act as DHCP servers. As a result, the port connected to PC3 would most likely be configured as trusted, since it is not acting as a potential source of malicious DHCP packets.

Learn more about Router, here https://brainly.com/question/29768017

#SPJ4

you're trying to diagnose why a system is not connecting to the internet. you've been able to find out that your system's ip address is 169.254.0.0. which of the following statements correctly suggests the next best step?

Answers

The next best step is indicated by one of the following statements: use the Internet browser to access the router configuration at 169.254.0.0.

On a Mac, how can I fix the 169.254 IP address?

Switch off the computer that is having a problem. Your modem, wireless access point, and router should all be powered off. After unplugging it for a moment, plug the power back in to turn them back on. Check to see if the correct IP Address has been assigned after turning on your computer.

What purpose does 169.254 169.254 serve?

In the world of the cloud, the 169.254 IP address is referred to as a "magic" IP; in AWS, it is used to get user data and instance-specific metadata. It is only accessible locally from instances and isn't protected by encryption or authentication.

To know more about ip address visit :-

https://brainly.com/question/16011753

#SPJ4

When someone has the plaintext and the corresponding ciphertext which of the following will provide the crypto variable O Linear cryptanalysis attack O Chosen plaintext O Chosen ciphertext O Brute force

Answers

The following plaintext has been selected, and it will supply the crypto variable.

An intentional plaintext assault on a cipher system is what?

A scenario known as a "chosen plaintext attack" allows the attacker to select plaintexts and examine the ciphertexts that go with them. Although this assault is thought to be less useful than the well-known plaintext attack, it is nevertheless quite harmful.

What kind of attack algorithm has been selected, and what plaintext and ciphertext is known?

The chosen plaintext attack refers to a situation in which the attacker has the option to select plaintexts P I and read the ciphertexts C I that correspond to those plaintexts. Although this assault is thought to be less useful than the well-known plaintext attack, it is nevertheless quite harmful.

To know more about chosen plaintext attack visit:-

https://brainly.com/question/28521946

#SPJ4

Consider the following instance variable and incomplete method. The method getBiggies should return a new ArrayList
that contains all values in list that are larger than val.
private List list; //assume list contains values
public List getBiggies( double val)
{
ArrayList bigs = new ArrayList();
/* blank */
return bigs;
}
Which of the following code segments shown below could be used to replace
/* blank */ so that getBiggies will work as intended?
I. for ( int i = 0; i < list.size(); i++)
if( list.get(i) > val )
bigs.add(i);
II. for ( int i = 0; i < list.size(); i++)
if( list.get(i) > val )
bigs.add(val);
III. for ( int i = 0; i < list.size(); i++)
if( list.get(i) > val )
bigs.add(list.get(i));
IV. for ( double item : list )
if( item > val )
bigs.add(item);

Answers

The following code segments shown below could be used to replace

/* blank */ so that getBiggies will work as intended:

I. for ( int i = 0; i < list.size(); i++)

if( list.get(i) > val )

bigs.add(i);

What is code segment?

A code segment is a section of a computer file that contains object code or an analogous segment of the program's address space that contains information on executable commands and directives. In the world of computing, a code segment is also referred to as a text segment or, simply, as text.

When a program is processed and executed, it is then saved in a computer file made up of object code. The code segment is one of these object file's divisions. When the program is loaded into memory by the loader so that it might be executed and implemented, various memory segments are allotted for different uses.

Learn more about code segment

https://brainly.com/question/25781514

#SPJ4

Question 1
Correct
Mark 1.00 out of 1.00
Which of the following includes a set of commands used to control access to the data within the database, including security?
Select one:
a. DML
b. DAL
c. DCL
d. DDL
Your answer is correct.
The correct answer is: DCL
Create Table SALE(
SaleID integer,
SaleDate date,
Tax decimal,
Total decimal
);
Create Table ITEM(
ItemID integer,
Name char(30),
Cost decimal,
Price decimal
);
Create Table SALE_ITEM(
SaleID integer,
SaleItemID integer
);
Considering the SQL create statements; assume that SALE, SALE_ITEM and ITEM tables were created without Primary Keys and Foreign Keys.
Which of the following SQL statements gives an error?
Select one:
a. Alter Table SALE Add Primary Key (SaleID);
Alter Table SALE_ITEM Add Primary Key (SaleID, SaleItemID);
Alter Table SALE_ITEM Add Unique (SaleID);
Alter Table ITEM Add Primary Key (ItemID);
Alter Table SALE Add Foreign Key (SaleID) References SALE_ITEM;
b. Alter Table SALE Add Primary Key (SaleID);
Alter Table SALE_ITEM Add Primary Key (SaleID, SaleItemID);
Alter Table SALE_ITEM Add Unique (SaleID);
Alter Table SALE Add Foreign Key (SaleID) References SALE_ITEM (SaleID);
c. Alter Table ITEM Add Primary Key (ItemID);
Alter Table SALE_ITEM Add Primary Key (SaleID, SaleItemID);
Alter Table SALE_ITEM Add Unique (SaleID);
Alter Table ITEM Add Foreign Key (ItemID) References SALE_ITEM;
d. Alter Table SALE Add Primary Key (SaleID);
Alter Table SALE Add Foreign Key (SaleID) References SALE_ITEM;
Your answer is incorrect.
The correct answer is: Alter Table ITEM Add Primary Key (ItemID);
Alter Table SALE_ITEM Add Primary Key (SaleID, SaleItemID);
Alter Table SALE_ITEM Add Unique (SaleID);
Alter Table ITEM Add Foreign Key (ItemID) References SALE_ITEM;

Answers

1. C: DCL includes a set of commands that are used to control access to the data within the database, including security.

DCL (Data Control Language) includes commands such as REVOKE AND GRANT which primarily deal with the permissions, rights, and other controls of the database management system.

2. The SQL statement that gives error is given in option C:

Alter Table ITEM Add Primary Key (ItemID);

Alter Table SALE_ITEM Add Primry Key (SaleID, SaleItemID);

Alter Table SALE_ITEM Add Unique (SaleID);

Alter Table ITEM Add F0reign Key (ItemID) References SALE_ITEM;

This SQL statement gives an error because once you have made the 'ItemID' a primary key in the 'ITEM' table, it is erroneous to make it a foreign key in the same table. Thus, this statement gives an error.

You can learn more about SQL statement at

https://brainly.com/question/29524249

#SPJ4

making deep neural networks right for the right scientific reasons by interacting with their explanations

Answers

Learn More The strength of deep learning models depends on the data you use. Adding new data is one of the simplest methods to improve validation accuracy.

What functions do deep neural networks perform?

By using data inputs, weights, and bias, artificial neural networks, often referred to as deep learning neural networks, attempt to replicate the functioning of the human brain. These elements work together to correctly identify, classify, and describe entities in the data.

What is deep learning's major benefit?

The main benefit of deep learning algorithms, as previously explained, is that they attempt to incrementally learn high-level features from data. This does away with the necessity for hard core feature extraction and domain knowledge.

To know more about networks visit:-

https://brainly.com/question/14276789

#SPJ4

Which of the following bring your own device (BYOD) risks is both a security issue for an organization and a privacy issue for a BYOD user?

Answers

Answer:

Explanation:

The unauthorized access of personal data stored on the device.

Other Questions
this term to the political authority held by citzens of the united states which, when transfered to the government, empowers the government to act on behalf of the citizens Is mean and SD the same? Which two of the following themes are present in the fable?Take care of the little things and the big things will take care of themselves.The only way to predict the future is by asking for advice.We often disregard good things because we are looking for something greater.If you want something done right, you need to do it yourself. A and B A and C B and C C and D What are the 3 methods used to calculate volume? Joshua has a points card for a movie theater. He receives 60 rewards points just for signing up. He earns 5.5 points for each visit to the movie theater. He needs at least 245 points for a free movie ticket. Which inequality can be used to determine vv, the minimum number of visits Joshua needs to earn his first free movie ticket? A data lake is composed of:Select one:A. historical data from legacy systems.B. unstructured and structured data that has not been analyzed.C. internal and external data sources.D. historic and current internal data.E. historic external data. What does 5 more than mean? What was the most significant discovery of the Scientific Revolution? Is reflection and rotation the same? Writing clear, compelling copy for various mediums (e.g. ads, blog posts, newsletters) Conducting thorough research and interviews. whats the surface area? & B and c Who benefits from free trade zones? The stationary section is on isle 14, one row over from the scents and perfumes. Outdoor advertising on federally subsidized highways and interstates in the united states is legislated by the____ environmental protection law of 1955 federal trade commission act of 1934 federal communications controls act of 1971 highway beautification act of 1965 warren/magnuson highway act of 1986 How do you know when a graph is inequality? Which refers to words used by writers to create vivid mental pictures? Which outcome did the Battle of San Antonio de Bxar have? A. Mexican troops forced the Texans to retreat. B. Both sides withdrew from the town. C. Texans captured San Antonio. D. Mexican soldiers demolished the Alamo. Customer: "with all of the money i am spending today, will i be receiving anything complimentary?". I NEED HELP ASAPPPPPP 3. Boring Array Array operations are boring and fun! You are given two arrays of integers a 1 ,a 2 ,,a n a and b 1 ,b 2 ,,b n . Let's define a transformation of the array a : Choose any non-negative integer k such that 0kn . Choose k distinct array indices Add 1 to each of a i1 ,a i2 ,,a ik , all other elements of array a 1 remain unchanged. Permute the elements of array a in any order. Is it possible to perform some transformation of the array a exactly once, so that the resulting array is equal to b? Function Description Complete the function trans formArray in the editor below. trans formArray should return True if array a can be transformed into array b by the operation mentioned above, otherwise, return me formarray has the following parameter(s): a: a string representing array, each element is separated by space b: a string representing array, each element is separated by space Constraints - n(1n10 6 ) - a 1 ,a 2 ,,a n (10 6 a i 10 6 ) - b 1 ,b 2 ,,b n (10 6 b i 10 6 ) Input Format For Custom Testing - Sample case 0 Sample input 42340 12345 1>101/b in/python 3 13 * Complete the 'transionmarray' funct 14 The function is expected to return. 16 * The runction 17 2. STRTNG b 18 * 19 20 def transformArray (a,b): 21 * Write your code here 23> if __name = = '_main_-'g ... array indices 1i 1