Answer:
The inner planets are much smaller than the outer planets and because of this have relatively low gravity and were not able to attract large amounts of gas to their atmospheres.
A 45 kg swimmer starting from rest can develop a maximum speed of 12 m/s over a distance of 20 m How much net force must be applied to do this ?
MUST SHOW WORK!
I NEED ANSWER ASAP WILL MARK BRAINLY Which term is defined as the change in the direction of light when it goes from one medium into a different medium?
transmission
reflection
absorbtion
refraction
Answer:
reflection
Explanation:
Answer:
Refraction
I think
Many large and small rocks are found under glaciers. Explain how these rocks are both weathered and eroded.
Answer:
Explanation below
Explanation:
Ice, mostly in the form of glaciers can create different landforms as it erodes the earth. In some areas with mountains, the glaciers move gradually downhill and across the land areas. When they move, the transport virtually everything on their path, ranging from small grains of sands to huge boulders.
As these glaciers flow, the rocks being carried in the process scrape against the ground and erode both the ground and the rocks. Rocks are being ground up and oils are scrapped away.
The main types of erosion created by the glaciers are abrasion and plucking.
Most of our Solar system is composed of___
asteroids
moons
planets
empty space
Answer:
empty space
Explanation:
Our solar system comprises of the sun as the star, the planets, the dwarf planets, various moons, and plenty of asteroids, comets, and meteoroids. However, the majority part of the solar system consists of a void or empty space. These empty spaces basically composed of planetary dust and gas.
Hence, it can be concluded that Most of our Solar system is composed of "Empty Spaces."
The chart below lists the densities of various gemstones. If a gemstone has a mass of 6.24 g and a volume of 1.98 cm cubed, which gemstone is it
A. Opal
B. Diamond
C. Garnet
D. Topaz
Answer:
C. Garnet
Explanation:
density = mass/volume
density = 6.24g/1.98cm^3
density = 3.15 g/cm^3 (Garnet)
Hope this helps!
Garnets are minerals that can be found as single crystals, pebble-like formations, or masses of intergrown crystals.They are opaque, transparent to translucent minerals. Thus, option C is correct.
What are the physical properties of Garnet?A garnet has a volume of 1.6 cubic centimetres and a density of 3.5 grams per cubic centimetre. The proportion of a mineral's mass to volume is known as density. It is a measurement of how much “stuff” can fit into the space a mineral takes up.
Garnets can be found in a variety of colours, including orange, yellow, green, purple, brown, blue, black, pink, and colorless, but are most usually found in reddish tones.There are very few blue garnets.
Therefore, density = mass/volume density = 6.24g/1.98 cm^3 density = 3.15 g/cm^3 (Garnet).
Learn more about Garnet here:
https://brainly.com/question/28883904
#SPJ2
What does this same experiment( the picture) tell you about light waves? Explain.
what is one standard kilogramun si system
Answer:
The kilogram (kg) is defined by taking the fixed numerical value of the Planck constant h to be 6.62607015 ×10−34 when expressed in the unit J s, which is equal to kg m2 s−1, where the meter and the second are defined in terms of c and ∆νCs.
The circumference of the Earth is
approximately 40,075 kilometers.
How many significant figures are
there in the numerical value?
Answer:
5 sig figures
Explanation:
What force pulls objects toward each other because of their masses?
Answer:
Gravity force
Explanation:
Answer:
grav force
Explanation:
The orange-spotted filefish lives in coral reefs. Warming ocean temperatures have caused coral reef destruction, causing the filefish population to rapidly decline. (2 causes) Habitat Loss Habitat Loss Invasive Species Invasive Species Pollution Pollution Population Growth Population Growth Climate Change Climate Change Overharvesting Overharvesting
Answer:
Pollution
Climate change
Explanation:
The destruction of the coral reef can be attributed to pollution and climate change.
The pollution of the atmosphere by greenhouse gases such as carbon dioxide causes the average temperature of the planet to increase, a phenomenon that is referred to as global warming. Global warming also causes an increase in the temperature of sea waters which can lead to the death of microscopic algae, causing coral bleaching.
An increase in the concentration of carbon dioxide in the atmosphere also causes ocean acidification which, in turn, reduces the availability of materials required to form the calcium carbonate of the coral reef. In extreme cases, acidification of the ocean can cause the dissolution of the coral skeletons.
the ocean contains many plants and protists that can make their own food through photosynthesis. Which need do these organisms get by living near the surface that they cannot get in deep water?
shelter
oxygen
sunlight
Answer:
sunlight
Explanation:
Photosynthesis is made possible by energy from the sun.
A crate is being pulled down an incline as shown in the figure. With respect to the crate's direction of motion, which of the following forces does only negative work on the crate?
Answer: Fn
Explanation: Because Fn is applying force upward
What are the advantages and Disadvantages of using Circuit Breakers Instead of Fuses
Answer:
Explanation:
Circuit breaker is an automatic electrical switch which cuts the power when there is surge in current.
Advantages of Circuit breaker
They are more reliable i.e. they are not replaced frequentlyEfficient and easy to safeguard electrical applianceDisadvantage of Circuit breaker
They are less sensitive than fuses i.e. fuses are much faster than circuit breaker.Answer:
The benefits are defined throughout the section described according to the particular context.
Explanation:
Just before it completes its function, users should substitute a fuse, although circuit breakers work through a trigger where you essentially restart or reboot. Fuses become composed of such a lump of material (metal) that can explode when enough electric current is passed through everything, disturbing another circuit successfully therefore stopping the equipment from hitting another power outage.Read this quotation:
"… my father, the King, is old and feeble. He has only me to help him take care of his people. This terrible dragon has driven them from their homes, carried away their cattle, and ruined their crops."
Which character says these words?
St. George
the Princess in "Robin Hood and the Golden Arrow"
the Princess in "The Last of the Dragons"
the Princess in "St. George and the Dragon"
Answer:
the Princess in "St. George and the Dragon"
Answer:
The princess in st. George and the dragon
Explanation:
Have a good day
What a measurement? Write down t its importance inn an our daily life.
Answer:
Time, size, distance, speed, direction, weight, volume, temperature, pressure, force, sound, light, energy—these are among the physical properties for which humans have developed accurate measures, without which we could not live our normal daily lives. Measurement permeates every aspect of human life.
A football player at practice pushes a 80 kg blocking sled across the field at a constant speed. The coefficient of kinetic friction between the grass and the sled is 0.30. How much force must he apply to the sled
Answer:
The value is [tex]F = 235.2 \ N[/tex]
Explanation:
From the question we are told that
The mass of the sled is [tex]m = 80 \ kg[/tex]
The coefficient of friction is [tex]\mu = 0.30[/tex]
Generally the force that must be applied to the sled is equal to the frictional force experienced by the sled which is mathematically represented as
[tex]F = m * \mu * g[/tex]
=> [tex]F = 80 * 0.30 * 9.8[/tex]
=> [tex]F = 235.2 \ N[/tex]
A 60 N force is applied over distance of 15 m. How much work was done? ( show work)
Lina holownicza wytrzymuje działanie siły o wartości co najwyżej 1400 N (większa siła powoduje rozerwanie liny). Oblicz maksymalne przyspieszenie, jakie może osiągnąć samochód o masie 2000 kg holowany na takiej linie po poziomej jezdni, jeżeli wiadomo, że łączna wartość sił oporu ruchu tego samochodu w czasie holowania wynosi 400 N.
Odpowiedź:
0,5 m / s²
Wyjaśnienie:
Jeśli się uwzględni:
Masa samochodu (m) = 2000 kg
Wartość siły oporu podczas holowania = 400N
Lina o maksymalnej sile może wytrzymać = 1400N
Maksymalne przyspieszenie = siła / masa samochodu
Siła = maksymalna siła - siła oporu
Siła = 1400 N - 400 N = 1000 N.
Stąd maksymalne przyspieszenie;
1000 N / 2000 kg
= 0,5 m / s²
PLEASE HELP ME ASAP!!!!!!
Quincy is monitoring the movement of a particle along the x-axis of an x-y plane. The velocity is negative, and the acceleration is positive. Which of the following describes what Quincy observes?
a. The particle is moving in a negative direction, and its speed is increasing.
b. The particle is moving in a positive direction, and its speed is increasing.
c. The particle is moving in a positive direction, and its speed is decreasing.
d. The particle is moving in a negative direction, and its speed is decreasing.
Answer:
c. The particle is moving in a positive direction, and its speed is decreasing.
Answer:
d. The particle is moving in the negative direction, and its speed is decreasing
Explanation:
If a 2kg ball rolls down a ramp that is 15 meters long in 25 seconds, what is the
average speed of the ball?
Will mark 5 stars!!!!!
Answer:
1.968504 ft/s
Calculate the mass of a man jogging north along the highway at a rate of 2.65 m/s and a momentum of 225.3 kg*m/s
Answer:
85.02 kgExplanation:
The mass of the man can be found by using the formula
[tex]m = \frac{p}{v} \\ [/tex]
v is the velocity
p is the momentum
From the question we have
[tex]m = \frac{225.3}{2.65} \\ = 85.01886...[/tex]
We have the final answer as
85.02 kgHope this helps you
A student rings a brass bell with a frequency of 200 Hz. The sound wave
travels through brass, air, and glass. What is the wavelength of the wave in
brass?
Medium
Wave speed
(m/s)
Brass
4,700
Air
346
Glass
5,640
A. 2.3 m
B. 0.43 m
C. 0.043 m
D. 23.5 m
Answer:
Option D. 23.5 m
Explanation:
From the question given above, the following data were obtained:
Frequency = 200 Hz
Speed of sound in brass = 4700 m/s
Wavelength of sound in brass =?
We can obtain the wavelength of the sound in the brass by using the following formula as illustrated below:
Wave speed = wavelength × frequency
4700 = wavelength × 200
Divide both side by 200
Wavelength = 4700 / 200
Wavelength = 23.5 m
Thus, the wavelength of the sound in the brass is 23.5 m
Erin was asked to design an experiment that would give the evidence needed to support the hypothesis: “A 6 inch playground ball will bounce higher than a 3 inch playground ball, because it is bigger.” Which of the following statements would not be a part of Erin’s experiment?
Determining all of the variables.
Repeating her experiment 5 times.
Recording her results as well as her observations.
Dropping the balls from different heights.
Do you think the inner planets should be explored or should the money be spent on other things? Justify your opinion.
Answer:
yes i think that inner planets should be explored because if we ever find new life or are able to live there then i think its worth takeing a risk.
Explanation:
A plastic ball is tied to 1 end of a long string and is swung in a horizontal circle. If it takes to complete 1 circle, what is the acceleration of the ball
Explanation:
Assuming the ball is swung with a constant velocity V and radius of circle R. Therefore, The tangential acceleration of the ball would be zero.
Considering the centripetal acceleration to be a_c . we get,
[tex]a_c= \frac{V^2}{R}[/tex]
a metallic cube whose each side is 10 cm is subjected to a shearing force of 100 kg. The top force is displaced through 0.25 cm with respect to the bottom. calculate the shearing stress strain and modulus
Answer:
9.8×104Nm−2,0.025,3.92×106Nm−2
Solution :
Here, L=10cm=10×10−2m
F=100kgf=100×9.8N
ΔL=0.25cm=0.25×10−2m,
Shearing stress =FL2=100×9.8(10×10−2) Sheraing strain =ΔLL=0.25×10−210×10−2 = 0.025 Shear Modulus of elasticity, G=Shearing stressShearing strain=9.8×1040.025
=3.92×106Nm−2
Explanation:
Who was the first person to study polarization of light?
-Huygens
-Newton
-Galileo
-Copernicus
Answer:
HUYGENS, CAN I S HAVE BRAINLIST?
Answer:
None
Explanation:
It is erasmus bartholinus
5) A 20.0 kg cart with no friction wheels sits on a table. A light string is attached to it and runs over a low friction pulley to a 0.0150 kg mass.
Draw a free body diagram showing all the forces acting on each object
Calculate the acceleration of the masses
Calculate the tension force in the cord
How long will it take the block to get to go 1.2 m to the edge of the table.
What will the velocity be as soon as it gets to the edge?
Answer:
1) Please find attached, created with Microsoft Visio
2) The acceleration of the masses connected by the light string is 0.00735 m/s²
3) The tension in the cord is 0.147 N
4) The time it would take the block to go 1.2 m to the edge of the table is approximately 18.07 s
5) The velocity of the cart as soon as it gets to the edge of the table is 0.042 m/s
Explanation:
1) Please find attached, the required free body diagram, showing the tension, weight and frictional (zero friction) forces acting on the cart and the mass created with Microsoft Visio
2) The acceleration of the masses connected by the light string is given as follows;
F = Mass, m × Acceleration, a
The mass of the truck, M = 20.0 kg
The mass attached to the string, hanging rom the pulley, m = 0.0150 kg
The force, F acting on the system = The pulling force on the cart = The tension on the cable = The weight of the hanging mass = 0.0150 × 9.8 = 0.147 N
The pulling force acting on the cart, F = M × a
∴ F = 0.147 N = 20.0 kg × a
a = 0.147 N/(20.0 kg) = 0.00735 m/s²
The acceleration of the truck = a = 0.00735 m/s²
3) The tension in the cord = F = 0.147 N
4) The time, t, it would take the block to go 1.2 m to the edge of the table is given by the kinematic equation, s = u·t + 1/2·a·t²
Where;
s = The distance to the edge of the table = 1.2 m
u = The initial velocity = 0 m/s (The cart is assumed to be initially at rest)
a = The acceleration of the cart = 0.00735 m/s²
t = The time taken
Substituting the known values, gives;
s = u·t + 1/2·a·t²
1.2 = 0 × t + 1/2 ×0.00735 × t²
1.2 = 1/2 ×0.00735 × t²
t² = 1.2/(1/2 ×0.00735) ≈ 326.5306
t = √(1.2/(1/2 ×0.00735)) ≈ 18.07
The time it would take the block to go 1.2 m to the edge of the table = t ≈ 18.07 s
5) The velocity, v, of the cart as soon as it gets to the edge of the table is given by the kinematic equation, v² = u² + 2·a·s as follows;
v² = u² + 2·a·s
u = 0 m/s
v² = 0² + 2 × 0.00735 × 1.2 = 0.001764
v = √(0.001764) = 0.042
The velocity of the cart as soon as it gets to the edge of the table = v = 0.042 m/s.
Answer:
There's no answer I'm just taking points like you did me, so thank you for your points I'll put them to good use ;)
What PLACE is the 8 in in the number 38,341,097.54
Answer:
The millions place.
Explanation:
Qliestion 5 (1 point)
A car slows from 15.0 m/s to 5.0 m/s in 3.0s. What is the acceleration of the car?
Answer:
-3.33 ms^-2
Explanation:
Hope it helps