while standing at the edge of a cliff 45m high, you drop a ball. When the ball has fallen 5m, you throw a second ball straight down. What initial speed must you give the second ball if they are both to reach the ground at the same time?​

The apparatus consists of a hollow metal tube through which first tap water and then steam is passed. This process is accurate because it gives a result close to the required value. This is further explained below.

Generally, An experiment's accuracy is simply defined as the degree to which the final result is within the bounds of what is considered to be the accurate or approved value. As the distance decreases, so does the precision of the experiment.

In conclusion, Metal tubing, first filled with tap water, and subsequently steam, is used to create the device's steam. This method is accurate since it returns a value that is near to what is needed.

Read more about  experiment

https://brainly.com/question/11256472

#SPJ1

Answer: 204.0 kg = 204000.0 g

Explanation:

Standard, 1 kg = 1000 g

204.0 kg = 204.0 x 1000 = 204 000.0 grams

Aluminum metal is a good example of conductor of electricity while glass and paper are good example of insulators.

A conductor is material that allows easy passage of electric current through the.

All metals are good examples conductors. such as aluminum, iron, silver, etc.

A  non conductor or insulator is a material which does not allow easy passage of electric current through them.

Thus, aluminum metal is a good example of conductor of electricity while glass and paper are good example of insulators.

The complete question is below:

aluminium,metal,glass,and paper, are examples of what?

Learn more about conductors here: https://brainly.com/question/24154868

#SPJ1

The car A and car B are travelling at different speeds. The car that has a greater acceleration is car B.

Acceleration is defined as the rate change of velocity with time.

acceleration a = (Δv) / (Δt)

Car A is traveling with a constant velocity of 18 [m/s]. The initial and final velocity is same. So, the acceleration is given by

a = (18 -18)/ t

a = 0 m/s²

Car B speeds up from 0 [m/s] to 10 [m/s] in 4 seconds. The acceleration is

a = (10 -0)/ 4

a = 2.5 m/s²

Thus, the car B has greater acceleration.

Learn more about acceleration.

https://brainly.com/question/12550364

#SPJ1

Answer:

As the number of bulbs in series increases, both the ammeter reading and bulb brightness should decrease. Using standard ammeters may not give perfect results and if the bulbs are allowed to heat up too much in between adding more bulbs, their resistance will be higher.

Explanation:

hope it helps you and give me a brainliest

Answer:

A, AND B,

Explanation: just trust me bro

Answer:

m³ is a derived unit because it is a product of three basic units. ( meters*meters*meters)

We can calculate the width/thickness of a coin using a screw gauge by placing it in between the teeth of the gauge.

We can determine the width/thickness of a coin by using a screw gauge because screw gauge is an instrument that measures thickness of an object that are very thin. First we can placed the coin in between the teeth of the gauge and then move the gauge until the coin can be held tightly. After that note the reading on the scale.

So we can conclude that we can calculate the width/thickness of a coin using a screw gauge by placing it in between the teeth of the gauge.

Learn more about thickness here: https://brainly.com/question/4937019

#SPJ1

Answer:

Explanation:

the average weight for a pair of men's dress shoes is around 2 pounds.

Answer:Radio works by transmitting and receiving electromagnetic waves. The radio signal is an electronic current moving back and forth very quickly. A transmitter radiates this field outward via an antenna; a receiver then picks up the field and translates it to the sounds heard through the radio.In AM (Amplitude Modulation) radio, the strength (amplitude) of the signal is changed (modulated) to make the sounds. In FM (Frequency Modulation) radio, it is the speed (frequency) of the signal that is changed. When you tune in your radio, the dial number indicates the kilo or megaHertz at which the signal is being broadcast.

Radio signal uses specific frequency, or how quickly the waves of the field move up and down. Hertz is a measurement of the number of wave cycles per second - AM is expressed in kiloHertz, while FM radio is expressed in megaHertz. The station power affects the range of the signal, or how far it can travel. The strongest AM power allowed in the United States is 50,000 watts.

Explanation:

Answer:

It works trough transmitted and received electromagnetic waves

Explanation:

Radio works by transmitting and receiving electromagnetic waves. The radio signal is an electronic current moving back and forth very quickly. A transmitter radiates this field outward via an antenna; a receiver then picks up the field and translates it to the sounds heard through the radio. Radio works by transmitting and receiving electromagnetic waves. The radio signal is an electronic current moving back and forth very quickly. A transmitter radiates this field outward via an antenna; a receiver then picks up the field and translates it to the sounds heard through the radio.

To push a box up an inclined plane, the force required is smaller if you push parallel to the incline.

This is also referred to as a ramp and is a flat surface which is tilted at an angle.

Pushing parallel to the plane doesn't generate friction which means a smaller amount of force will be required.

Read more about Inclined plane here https://brainly.com/question/25845680

#SPJ1

Answer:

16 seconds

Explanation:

we want to find the acceleration first:

F = ma

50/400 = a

a = 0.125 m/s²

laws of motion formula:

vf = vi + at

12 = 10 + 0.125t

t = 16 seconds

hope this helps :)

Answer:

20m

Explanation:

So the formula for PE(Potential Energy) = Mass x Acceleration x Height

So we are given the following

PE = 1960

Mass = 10Kg

Acceleration = 9.8m/s^2 (The reason we have an acceleration is due to gravity)

Height = ?

So to calculate height we will use the same formula

1960 = 10 x 9.8 x h

1960 = 98 x h

1960 = 98h

we divide 98 on both sides

H = 20m

Hope this helped.

(a) The ball’s maximum speed over the net is v(max) = √2gh.

(b) The maximum speed of the horizontally moving ball clearing the net is about 27 m/s.

(c) Speed of the ball is independent of its mass.

The time of motion of the ball is calculated as follows;

h = vt + ¹/₂gt²

1 = 0 + ¹/₂(9.8)t²

1 = 4.9t²

t² = 1/4.9

t² = 0.204

t = 0.452 s

The horizontal speed of the ball is calculated as follows;

X = vt

v = X/t

v = (12 m)/(0.452)

v = 26.6 m/s ≈ 27 m/s  (proved)

P.E = K.E

mgh = ¹/₂mv²

gh = ¹/₂v²

2gh = v²

√2gh = v(max)

Speed of the ball is independent of its mass.

Learn more about horizontal velocity here: https://brainly.com/question/24681896

#SPJ1

Answer: I think Its the Height is 11.76 Meters (38.582677 Feet) between the bridge and the ground

Explanation: Supposing that where not counting air resistance in the equation, the equation [tex]D = ut+\frac{1}{2} at^{2}[/tex] states that 1/2 multiplied by earths gravitational acceleration multiplied by the amount of time to reach the bottom: 2.4 seconds equals 11.76 meters of height between the bridge and the ground.

120V is the line-to-neutral voltage .

It is defined as the voltage of a power transmission circuit or distribution circuit up to the point of transformation or utilization.

The secondary line voltage is [tex]V_{L} = 280 V[/tex]

The notation AC indicates that the current is an alternating current.

The given formula is [tex]V_{ph} = \frac{V_{L} }{\sqrt{3} }[/tex]

Substitute  208 V into the formula

[tex]V_{ph} = \frac{V_{L} }{\sqrt{3} } \\\\V_{ph} = \frac{208V}{\sqrt{3} } \\\\= 120 (Approx)[/tex]

So, the line-to-neutral voltage is 120 V.

learn more about line voltage :https://brainly.com/question/22598217

#SPJ1

Hopefully, it's helpful to you -

Don't get me wrong, but I think there could be a different way to interpret Gas and Dust mean here- which just makes this brace map completely different.

Nevertheless, I did what I thought (and I still hold with it) was correct.

The chart has been filled in the attached picture.

The universe encompasses all of space and time, as well as their contents, which include planets, stars, galaxies, and all other forms of matter and energy. The Big Bang theory is the most widely accepted cosmological explanation for the evolution of the universe. According to this idea, space and time coexisted 13.7870.020 billion years ago, and the cosmos has been expanding since. While the spatial extent of the entire universe is unknown, the observable universe can be measured, which is around 93 billion light-years in diameter at the present time.

Ancient Greek and Indian thinkers devised some of the earliest cosmological conceptions of the world, which were geocentric, with Earth at the centre. More precise astronomical measurements throughout the ages prompted Nicolaus Copernicus to establish the heliocentric hypothesis, which places the Sun at the centre of the Solar System. Issac Newton based his rule of universal gravitation on Copernicus' work, as well as Johannes Kepler's equations of planetary motion and Tycho Brahe's observations.

To know more about galaxy :

https://brainly.com/question/31361315

#SPJ7.

The SI unit is agreed internationally through an agreement known as convention of the meter.

SI unit stands for International System Of Units (SI) - which is the metric system that is used universally as a standard for measurements.

The SI unit is agreed internationally through an agreement known as convention of the meter, which describes the measurement of fundamental quantities such as mass, time, and length.

Learn more about SI unit here: https://brainly.com/question/16393390

#SPJ1

Answer:

Upward: Negative

Downward: Positve

Explanation:

Let upward be positive

We want to find the work done on the object upwards.

The equation of work done due to gravity is

[tex]f _{g}d \cos( \alpha ) [/tex]

It is read as force of gravity times displacement times cos of the angle between the force and displacement.

Since gravity is happening down of the center of mass and the displacement is upwards, the angle is 180° so

[tex]f_{g}d \cos(180) [/tex]

Cosine of 180 is -1

so

[tex] - f_{g}d [/tex]

If we go downwards, the sign will be positive because cos(0)=1

The charge on the ball developed will be  1.78 x 10⁻⁷ Coulomb.

The field developed when a charge is moved. In this field, a charge experiences an electrostatic force of attraction or repulsion depending on the nature of charge,

Given is an electric field E = 100,000i N/C causes the 5.0 g point charge to hang at a 20° angle.

If T is the tension and θ is the angle, then

The force in  x direction Fx = T sinθ

Force in y direction Fy = T cosθ = mg

Dividing both the equation, we have

tan θ = qE /mg

Substitute the given values in the question, we have

q = 5 x10⁻³ x 9.81 x tan 20 /100000

q = 1.78 x 10⁻⁷ Coulomb.

Thus, the charge of ball is  1.78 x 10⁻⁷ Coulomb.

Learn more about electric field.

https://brainly.com/question/15800304

#SPJ1

If the energy transfer diagram created by Ray has error in it, it can be corrected by applying the principle of energy conservation.

Energy diagram is sketch of the energy flow process or energy transfer or energy conversion process.

The law of energy conservation states that, energy can neither be created nor destroyed but can be converted from one form to another.

Thus, if the energy transfer diagram created by Ray has error in it, it can be corrected by applying the principle of energy conservation.

Learn more about energy conservation here: https://brainly.com/question/24772394

#SPJ1

Angular speed

f is frequency

Area=36cm²=0.0036m²

Now

[tex]\\ \rm\Rrightarrow emf=nAB\omega[/tex]

[tex]\\ \rm\Rrightarrow 2.8=25\times 36\times 10^{-4}\times 376.8B[/tex]

[tex]\\ \rm\Rrightarrow 2.8=33.84B[/tex]

[tex]\\ \rm\Rrightarrow B=0.0827T[/tex]

[tex]\\ \rm\Rrightarrow 8.3\times 10^{-3}T[/tex]

vertical motion

h=1/2 gt²

100 = 1/2 x 10 x t²

t² = 100/5 = 20

t = 2√5 s

horizontal motion

x = v.t

x = 15 x 2√5

x = 30√5 m

(a) The value of the steady state charge in the circuit is 3 C.

(b) The steady-state current ,in an LRC-series circuit is 5.3 A.

The value of the steady state charge in the circuit is calculated as follows;

Q = CV(max)

Q = 0.1 x 30

Q = 3 C

I = V/R

Vrms = 0.7071 x V(max)

Vrms = 0.7071 x 30

Vrms = 21.21 V

I = Vrms/R

I = 21.21/4

I = 5.3 A

Learn more about steady state current here: https://brainly.com/question/15726481

#SPJ1

Answer:

Friction     100 j

Explanation:

Friction causes the inequality between PE and KE

100 J

Answer:

Option B - 360 J

Explanation:

One of the formulas used to find out how much work was done is :

E = 0.5×m×v² (where m is the mass and v is the velocity)

Now we substitute values from the question and simplify :

E = 0.5×500×1.2²

E = 250×1.2²

E = 250×1.44

E = 360 J

So our answer is Option B

Hope this helped and have a good day

Answer:

B. period of the sound wave

The difference between the manufacturer's claims and your findings is, the manufacturer is concerned about amount of fat in the meat while you are concerned about calories.

Your findings concluded that only fat can provide calories needed in the body, perhaps other classes of food or nutrients in the meat can provide calories as well.

In the manufacturer's claim there are about 3% fat in the lunch meat and doesn't necessary mean that all the calories needed is the 3% fat.

Thus, there are lots of difference between your findings and the manufacturer's claim. The manufacturer is concerned about amount of fat in the lunch meat while you are concerned about calories in the meat.

Learn more about claims here: https://brainly.com/question/2748145

#SPJ1

Explanation:

the two vectors are 5i+11j+11k

Answer:

600mph

Explanation:

hope this helps!