Which wave has a greater frequency

Hello!!

For calculate the Velocity of the wave let's applicate the formula:

[tex]\boxed{V=f*\lambda}[/tex]

[tex]\textbf{Being:}[/tex]

[tex]\sqrt{}[/tex] V = Velocity = ?

[tex]\sqrt{}[/tex] f = Frequency = 300 Hz

[tex]\sqrt{}[/tex] [tex]\lambda[/tex] = Wavelength = 1,1 m

⇒ [tex]\text{Then let's \textbf{replace it according} we information:}[/tex]

[tex]V = 300 \ Hz * 1,1 \ m[/tex]

⇒ [tex]\text{Let's resolve it: }[/tex]

[tex]V = 330 \ m / s[/tex]

[tex]\textbf{Result:}\\\text{The velocity is \textbf{330 meters per second}}[/tex]

Answer:

For calculate the Velocity of the wave let's applicate the formula:

V = Velocity = ?

f = Frequency = 300 Hz

 = Wavelength = 1,1 m

⇒  

⇒  

Explanation:

because of gravitional pull

Answer:

W = 12 J

Explanation:

Given that,

Force, F = 4 N

The object moves in rightward direction for a distance of 3 m.

Work done on the object is given by :

[tex]W=F\times d\\\\=4\ N\times 3\ m\\\\=12\ J[/tex]

So, the work done on the object is 12 J.

Answer:

v = 16.87 m/s

Explanation:

Given that,

Distance, d = 1.25 miles

d = 2011.68 m

Time, t = 1 minute 59.2 seconds

= 60 s + 59.2 s

= 119.2  s

We need to find the average speed of the horse. It is given by total distance covered divided by total time.

[tex]v=\dfrac{2011.68 \ m}{119.2\ s}\\\\=16.87\ m/s[/tex]

So, his average speed is 16.87 m/s.

Answer:

No

Explanation:

Answer:

No

Explanation:

Tornadoes are usally produced in the Midwest regions. Hurricanes are made with water, not clouds. So, no, hurricanes cannot produce tornadoes.

Answer:

So, given the eqn Fg=G(m1+m2/r^2) where G is the gravitational constant, m is the mass of the satellite and m2 is the mass of the earth and r is the distance from earth to the satellite, the force of earths gravity should be quartered.

Cause (2r)^2 gets turned into (4r^2) where 4r^2 is compared to r^2

Explanation:

Answer:

A

Explanation:

Answer:

B

Explanation:

Answer: C- The planets appeared to move backward in the sky occasionally.

Answer:

a

 [tex]\Delta P = 7558.6 \ Pa[/tex]

b

 [tex]h_1 = 10 \ m[/tex]

Explanation:

From the question we are told that

   The position of the column of mercury in the barometer is  [tex]h = 736 \ mm = 0.76 \ m[/tex]\

   The density of mercury is  [tex]\rho = 13,000 \ kg / m^3[/tex]

Generally the  pressure of the atmosphere at that column is mathematically represented as  

         [tex]P = \rho * g * h[/tex]

=>      [tex]P =13 000 * 9.8 * 0.736[/tex]

=>      [tex]P = 93766.4 \ Pa[/tex]

Generally the atmospheric pressure at sea level (Generally the pressure before the change in level of the mercury column)  is  [tex]P_a = 101325 \ Pa[/tex]

Generally the change in air pressure  is mathematically represented as

      [tex]\Delta P = P_a - P[/tex]

=>   [tex]\Delta P = 101325 - 93766.4[/tex]

=>   [tex]\Delta P = 7558.6 \ Pa[/tex]

Generally the height which the column will rise to is mathematically evaluated as  

         [tex]h_1 = \frac{P}{ \rho_w * g }[/tex]

Here [tex]\rho_w[/tex] is the density of water with value  [tex]\rho_w = 1000 \ kg/m^3[/tex]

So

       [tex]h_1 = \frac{ 93766.4}{ 1000 * 9.8 }[/tex]

=>   [tex]h_1 = 10 \ m[/tex]

Answer:

7.5

Explanation:

Answer:

62.5m

Explanation:

Given parameters:

Initial velocity  = 0m/s

Time  = 5s

Acceleration  = 5m/s²

Unknown:

Distance traveled  = ?

Solution:

To solve this problem, we use the motion equation given below:

S = ut + [tex]\frac{1}{2}[/tex] at²

S is the distance traveled

u is the initial velocity

a is the acceleration

t is the time taken

Now, insert the parameters and solve;

 S =( 0 x 5) +( [tex]\frac{1}{2}[/tex] x 5 x 5²) = 62.5m

Answer:the answer is “A book sitting on a high shelf” :)

Explanation:

Answer:

c. because A will land first becuase its heavier

and D.

Explanation:

Answer:

? who is atera11?

Explanation:

Answer:

jjjjj

Explanation:

dkcdzjc

Answer:

Organisms 2 and 3

Explanation:

Answer:

Light and heat!

Explanation:

This is correct<3

Answer:

light and heat

Explanation:

i love science

Answer:

Potential energy = 14.7 Joules.

Explanation:

Given the following data;

Mass, m = 1kg

Height, h = 1.5m

We know that acceleration due to gravity is equal to 9.8m/s²

Potential energy can be defined as an energy possessed by an object or body due to its position.

Mathematically, potential energy is given by the formula;

[tex] P.E = mgh[/tex]

Where, P.E represents potential energy measured in Joules.

m represents the mass of an object.

g represents acceleration due to gravity measured in meters per seconds square.

h represents the height measured in meters.

[tex] P.E = mgh[/tex]

Substituting into the equation, we have;

[tex] P.E = 1*9.8*1.5[/tex]

P.E = 14.7 Joules.

Answer: It’s fastest in gases. Letter C !

Explanation:

Answer:

its c

Explanation:

Answer:

The Answer is A "To think of different materials to test"

Explanation:

APE X

Considering the Ohm's law, the correct answer is option B. the current is 0.048 A.

The flow of electricity through an object, such as a wire, is known as current (I). Its unit of measure is amps (A). So the current is a measure of the speed at which the charge passes a given reference point in a specified direction.

The driving force (electrical pressure) behind the flow of a current is known as voltage and is measured in volts (V) (voltage can also be referred to as the potential difference or electromotive force). That is, voltage is a measure of the work required to move a charge from one point to another.

Resistance (R) is the difficulty that a circuit opposes to the flow of a current and it is measured in ohms (Ω).

Ohm's law establishes the relationship between current, voltage, and resistance in an electrical circuit.

This law establishes that the intensity of the current that passes through a circuit is directly proportional to the voltage of the same and inversely proportional to the resistance that it presents.

Mathematically, Ohm's law is expressed as:

[tex]I=\frac{V}{R}[/tex]

Where I is the current measured in amps (A), V the voltage measured in volts (V); and R the resistance that is measured in ohms (Ω).

In this case, you know that the voltage between two points in a circuit is 3.6 V and the resistance between the points is 75 Ω.

Replacing in the Ohm's Law:

[tex]I=\frac{3.6 volts}{75 ohm}[/tex]

Solving:

I= 0.048 amps

Finally, the correct answer is option B. the current is 0.048 A.

Learn more about Ohm's law:

https://brainly.com/question/13076023

https://brainly.com/question/17286882?referrer=searchResults

https://brainly.com/question/2275770

Answer:10 m/s

Explanation:

A 100 kg gymnast comes to a stop after tumbling. Her feet do 5,000 J of work to stop her. The girl's velocity when she began to stop is 10 m/sec.

When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time. Velocity is vector quantity.

Uniform motion an object is said to have uniform motion when object cover equal distance in equal interval of time within exact fixed direction. For a body in uniform motion, the magnitude of its velocity remains constant over time. Here in the question velocity is changing by using work energy theorem we have,

work done = change in kinetic energy

5000 = (.5).m.v² , where v is velocity.

5000 = (.5).100.v²

v = 10 m/sec

A 100 kg gymnast comes to a stop after tumbling. Her feet do 5,000 J of work to stop her. The girl's velocity when she began to stop is 10 m/sec.

To learn more about velocity refer the link:

brainly.com/question/18084516  

#SPJ6

Answer:

1.04*10⁻⁵

Explanation:

light wave do showcase some behaviors whenever there is encounters with the end of the medium, some of the behaviors are - reflection, refraction, as well as diffraction. When visible light wave strikes a boundary that exist two different media, a portion of the energy will be transmitted into the new medium and some reflected.

Reflection of a light wave can be regarded as bouncing off of light wave from boundary. refraction on other hand is bending of the path of a light wave.

We were to calculate the reflectivity at the boundary,

reflectivity at the boundary can be calculated using the expression below

Reflectivity= (n₂ - n₁)² /(n₂ + n₁ ) ²

where

n₁= Indices of refraction at first grain= 1.545

n₂= Indices of refraction at second grain=

1.555

(1.555 - 1.545)² / (1.555 - 1.545)²

=(0.01)²/ (3.1)²

= 0.0001/ 9.61

= 1.04*10⁻⁵

Hence, the reflectivity at the boundary if the indices of refraction for the two grains are 1.545 and 1.555 in the direction of light propagation is 1.04*10⁻⁵

Answer:

29.96m/s

Explanation:

Given parameters:

Initial speed  = 25.5m/s

Acceleration  = 1.94m/s²

Time  = 2.3s

Unknown:

Final speed of the car  = ?

Solution:

To solve this problem, we are going to apply the right motion equation:

    v = u  + at

v is the final speed

u is the initial speed

a is the acceleration

t is the time taken

 Now insert the parameters and solve;

      v  = 25.5 + (1.94 x 2.3)  = 29.96m/s

Answer:

a)  I = ([tex]\frac{M}{3}[/tex] + [tex]\frac{4m}{9}[/tex]) L²  ,   b)     w = (\frac{27 M}{18 m} + 2)⁻¹  Lv₀

Explanation:

a) The moment of inertia is a scalar that represents the inertia in circular motion, therefore it is an additive quantity.

The moment of inertia of a rod held at one end is

         I₁ = 1/3 M L²

The moment of inertia of the mass at y = L

        I₂ = m y²

The total inertia method

        I = I₁ + I₂

        I = \frac{1}{3} M L² + m (\frac{2}{3} L)²

        I = ([tex]\frac{M}{3}[/tex] +[tex]\frac{4m}{9}[/tex] ) L²

b) The conservation of angular momentum, where the system is formed by the masses and the bar, in such a way that all the forces during the collision are internal.    

Initial instant. Before the crash  

       L₀ = I₂ w₀  

angular and linear velocity are related  

       w₀ = y v₀  

      w₀ = [tex]\frac{2}{3}[/tex]L v₀  

      L₀ = I₂ y v₀  

Final moment. After the crash  

      [tex]L_{f}[/tex] = I w

how angular momentum is conserved  

      L₀ = L_{f}

      I₂ y v₀ = I w

substitute

      m ([tex]\frac{2L}{3}[/tex])² (\frac{2L}{3} v₀ =  ([tex]\frac{M}{3}[/tex] +[tex]\frac{4m}{9}[/tex] ) L²  w

      [tex]\frac{6}{27}[/tex]  m L³ v₀ = ([tex]\frac{M}{3}[/tex] +[tex]\frac{4m}{9}[/tex] ) L²  w

        [tex]\frac{6}{27}[/tex]  m L v₀ = ([tex]\frac{M}{3}[/tex] +[tex]\frac{4m}{9}[/tex] )   w

        L v₀ = [tex](\frac{27 M}{18 m} + 2)[/tex]  w     

       w = (\frac{27 M}{18 m} + 2)⁻¹  Lv₀

Answer:

PART A: Maximum speed = 0.314 m/s

PART B: Maximum acceleration = 1.23 m/s²

Explanation:

A simple Harmonic motion is a repetitive motion through an equilibrium point.

Amplitude = 8.0cm = 8/100 = 0.08m (highest displacement)

period (T) = 0.80s

A) maximum speed [tex](V_{max)[/tex]

[tex]V_{max} = 2\pi fA\\where:\\A = Amplitude = 0.08m\\f = frequency = \frac{1}{period(T)} = \frac{1}{0.8} = 1.25 Hz\\\therefore 2\pi fA = 2\pi \times 1.25 \times 0.08\\= 0.314\ m/s[/tex]

B) maximum acceleration [tex](a_{max})[/tex]

[tex]a_{max} = (2\pi f)^2A\\where:\\f = 1.25Hz\\A = 0.08m\\a_{max} = (2\pi \times 1.25)^2 \times 0.08\\= 1.23\ m/s^2[/tex]