The salt that would form an acidic solution when dissolved in water is NH₄CN.
Why would NH₄CN form an acidic solution when dissolved in water?NH₄CN consists of the ammonium ion (NH⁴⁺) and the cyanide ion (CN⁻). NH⁴⁺ is the conjugate acid of NH₃ (ammonia. Ammonia is commonly recognised as a weak base. CN⁻ is the conjugate base of HCN (hydrogen cyanide), which is a weak acid.
The Ka of NH⁴⁺ is 5.6 × 10-10, which means that NH⁴⁺ is a weak acid. The Kb of CN⁻ is 1.6 × 10-5, which means that CN⁻ is a weak base.
When NH₄CN is dissolved in water, NH⁴⁺ can donate a proton to water to form H3O⁺ (hydronium ion) and NH₃, making the solution acidic.
Therefore, NH₄CN would form an acidic solution when dissolved in water.
Learn more about acidic solutions here:
https://brainly.com/question/13632841
#SPJ1
A mixture of CO(g) and O2(g) in a 1.1 −L container at 1.0×103 K has a total pressure of 2.3 atm . After some time the total pressure falls to 1.8 atm as the result of the formation of CO2.
Find the mass (in grams) of CO2 that forms.
The mass of [tex]CO_{2}[/tex] that forms is approximately 0.299 grams.
How to calculate the mass of a gas ?The term "partial pressure" refers to the pressure that one gas in a combination imposes. Partial pressure refers to the pressure exerted by a gas in a gas mixture if it alone inhabited the entire volume occupied by the combination.
To find the mass of [tex]CO_{2}[/tex] that forms in the reaction between CO(g) and [tex]O_{2}[/tex](g) in a 1.1-L container at 1.0x10^3 K with an initial total pressure of 2.3 atm and a final total pressure of 1.8 atm, follow these steps:
1. Calculate the initial moles of the gas mixture:
Use the ideal gas law, PV = nRT. Rearrange to solve for n: n = PV / RT.
Initial moles (n_initial) = (2.3 atm)(1.1 L) / (0.0821 L atm/mol K)(1.0x10^3 K)
= 0.0309 moles.
2. Calculate the final moles of the gas mixture:
Final moles (n_final) = (1.8 atm)(1.1 L) / (0.0821 L atm/mol K)(1.0x10^3 K)
= 0.0241 moles.
3. Determine the moles of [tex]CO_{2}[/tex] formed:
Moles of [tex]CO_{2}[/tex] (n_ [tex]CO_{2}[/tex])
= n_initial - n_final = 0.0309 moles - 0.0241 moles
= 0.0068 moles.
4. Calculate the mass of [tex]CO_{2}[/tex] formed:
Mass of [tex]CO_{2}[/tex] (m_ [tex]CO_{2}[/tex])
= n_ [tex]CO_{2}[/tex] x molar mass of [tex]CO_{2}[/tex]
= 0.0068 moles x 44.01 g/mol = 0.299 grams.
To know more about Partial Pressures:
https://brainly.com/question/13199169
#SPJ11
Calculate the EMF of a cell of copper 0.34 and Zinc 0.76 and state whether or not the reaction is spontaneous
1.10 V is the EMF of a cell of copper 0.34 and Zinc 0.76. In result of a positive EMF (1.10 V), this reaction drives spontaneously.
An energy transmission to an electric circuit based on a unit of electric charge, expressed in volts, is known as electromotive force (also known as electromotance, abbreviated emf) in electromagnetism and electronics. Electrical transducers are devices that create an emf by transforming non-electrical energy to electrical energy. Batteries, which transform chemical energy, or generators, which transform mechanical energy, both produce an electromagnetic field (emf). In result of a positive EMF (1.10 V), this reaction drives spontaneously
Cu2+ + 2e- → Cu E° = +0.34 V
Zn2+ + 2e- → Zn E° = -0.76 V
EMF = E°(Cu) - E°(Zn)
EMF = 0.34 V - (-0.76 V)
EMF = 1.10 V
To know more about EMF, here:
https://brainly.com/question/24376515
#SPJ1
Comparing 1 mole of atoms of any element to 1 mole of atoms of any other element would lead to the conclusion that both samples have:
Question 3 options:
a. the same mass
b. the same number of protons
c.the same volume
d. the same density
e.the same number of atoms
while 1 mole of atoms of any element will always contain the same number of atoms as 1 mole of atoms of any other element, the mass, number of protons, volume, and density of these samples will not be the same due to the unique properties of each element.
How to solve the question?
Comparing 1 mole of atoms of any element to 1 mole of atoms of any other element would lead to the conclusion that both samples have the same number of atoms. This is because one mole of any substance contains Avogadro's number of particles, which is approximately 6.022 x 10^23 atoms. Thus, 1 mole of any element will always contain the same number of atoms as 1 mole of any other element.
However, the mass of 1 mole of atoms of different elements will not be the same. This is because the mass of an atom is determined by its atomic mass, which is the sum of the masses of its protons, neutrons, and electrons. Different elements have different atomic masses, which means that the mass of 1 mole of atoms of one element will be different from the mass of 1 mole of atoms of another element.
Similarly, the number of protons, the volume, and the density of 1 mole of atoms of different elements will not be the same. Each element has a unique number of protons in its nucleus, which gives it a unique atomic number. The volume of 1 mole of atoms of different elements will also vary depending on the size of the atoms and their packing density. Finally, the density of 1 mole of atoms of different elements will depend on the mass of the atoms and the volume they occupy.
In summary, while 1 mole of atoms of any element will always contain the same number of atoms as 1 mole of atoms of any other element, the mass, number of protons, volume, and density of these samples will not be the same due to the unique properties of each element.
To know more about atoms visit :-
https://brainly.com/question/17545314
#SPJ1
when a 4.00 g sample of rbbr is dissolved in water in a calorimeter that has a total heat capacity of 1.39 kj⋅k−1, the temperature decreases by 0.380 k. calculate the molar heat of solution of rbbr.
The molar heat of solution of RbBr is 11.3 kJ/mol.
To calculate the molar heat of solution of RbBr, we can use the formula:
ΔHsoln = q / n
where ΔHsoln is the molar heat of solution, q is the heat absorbed or released during the dissolution process, and n is the number of moles of RbBr dissolved.
To find q, we can use the equation:
q = CΔT
where C is the heat capacity of the calorimeter and ΔT is the temperature change.
Substituting the given values into the equation, we have:
q = (1.39 kJ/K) × 0.380 K
q = 0.5282 kJ
Next, we need to calculate the number of moles of RbBr dissolved. The molar mass of RbBr is:
M(RbBr) = 85.47 g/mol
Therefore, the number of moles of RbBr dissolved is:
n = 4.00 g / 85.47 g/mol
n = 0.0468 mol
Now we can calculate the molar heat of solution of RbBr:
ΔHsoln = q / n
ΔHsoln = (0.5282 kJ) / (0.0468 mol)
ΔHsoln = 11.3 kJ/mol
Therefore, the molar heat of solution of RbBr is 11.3 kJ/mol.
Click the below link, to learn more about Molar heat:
https://brainly.com/question/29435378
#SPJ11
The molar heat of solution of RbBr is 11.3 kJ/mol.
To calculate the molar heat of solution of RbBr, we can use the formula:
ΔHsoln = q / n
where ΔHsoln is the molar heat of solution, q is the heat absorbed or released during the dissolution process, and n is the number of moles of RbBr dissolved.
To find q, we can use the equation:
q = CΔT
where C is the heat capacity of the calorimeter and ΔT is the temperature change.
Substituting the given values into the equation, we have:
q = (1.39 kJ/K) × 0.380 K
q = 0.5282 kJ
Next, we need to calculate the number of moles of RbBr dissolved. The molar mass of RbBr is:
M(RbBr) = 85.47 g/mol
Therefore, the number of moles of RbBr dissolved is:
n = 4.00 g / 85.47 g/mol
n = 0.0468 mol
Now we can calculate the molar heat of solution of RbBr:
ΔHsoln = q / n
ΔHsoln = (0.5282 kJ) / (0.0468 mol)
ΔHsoln = 11.3 kJ/mol
Therefore, the molar heat of solution of RbBr is 11.3 kJ/mol.
Click the below link, to learn more about Molar heat:
https://brainly.com/question/29435378
#SPJ11
What volume (in L) of 1.60 M Na3PO, would be required to obtain 0.600 moles of Nations?
To make 0.600 moles of PO43-, you would need 0.375 L of 1.60 M Na₃PO₄.
How is 0.1 M AgNO₃ solution calculated?By mixing 1.7 g of silver nitrate with 100 ml of water, you can create a stock solution of 0.1 M silver nitrate. Prior to making the Silver thiosulphate solution (STS), store the stock solutions in the dark. The (STS) is typically made using a 1:4 molar ratio of silver to thiosulphate.
For the reaction between Na₃PO₄ and water, the balanced chemical equation is:
Na₃PO₄ + 3 H₂O → 3 Na₊ + PO₄₃₋ + 3 OH₋
We can observe from this equation that 1 mole of Na₃PO₄ results in 1 mole of PO₄₋ ions. We would require 0.600 moles of Na₃PO₄ in order to produce 0.600 moles of PO₄₃₋.
The needed volume of 1.60 M Na₃PO₄ can be determined using the following formula:
Volume (L) = moles / molarity
Volume = 0.600 moles / 1.60 M
Volume = 0.375 L
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
The density of rhombic sulfur is 2.070 g cm3 with a standard molar entropy of 31.80J K mol-1. The density of monoclinic sulfur is 1.957 g cm-3 with a standard molar entropy of 32.60J Kmol a Can an increase in temperature be expected to make monoclinic sulfur more stable than rhombic sulfur? If so, at what temperature will the transition occur at 1 bar? Can an increase in pressure be expected to make monoclinic sulfur more stable than rhombic sulfur?
Answer:
Explanation:
The stability of a crystalline form of a substance can be evaluated based on its Gibbs free energy change upon transformation from one form to another. The transformation from rhombic sulfur to monoclinic sulfur can be expressed as:S(rhombic) → S(monoclinic)At constant temperature and pressure, the Gibbs free energy change (ΔG) for this transformation is given by:ΔG = ΔH - TΔSwhere ΔH is the enthalpy change and ΔS is the entropy change. If ΔG is negative, the transformation is thermodynamically favorable and the monoclinic form is more stable than the rhombic form.At 1 bar, the transition temperature (T) can be calculated using the equation:ΔG = 0which gives:T = ΔH/ΔSTo determine whether an increase in temperature can make the monoclinic form more stable than the rhombic form, we need to compare the values of ΔG for the two forms at different temperatures. Since we are given the standard molar entropy values for the two forms, we can use the equation:ΔG = ΔH - TΔSto calculate the Gibbs free energy change for the transformation at different temperatures. The enthalpy change (ΔH) is not given, but we can assume that it is roughly the same for the two forms since they are both solid sulfur. Therefore, we can compare the values of ΔG by considering only the entropy change (ΔS) and the temperature (T).At low temperatures, ΔS is small and ΔG is dominated by the enthalpy term, which we assume to be the same for both forms. Therefore, the rhombic form is more stable since it has a lower density and thus a lower enthalpy of formation. At high temperatures, ΔS becomes more important and the monoclinic form may become more stable.To calculate the transition temperature, we can set the ΔG values for the two forms equal to each other and solve for T:ΔG(monoclinic) = ΔG(rhombic)ΔH - TΔS(monoclinic) = ΔH - TΔS(rhombic)T = (ΔS(monoclinic) - ΔS(rhombic)) / ΔHSubstituting the values given, we get:T = (32.60 - 31.80) J K^-1 mol^-1 / ΔHWe do not have the value of ΔH, so we cannot calculate the transition temperature.Regarding the effect of pressure, we can use the same equation for Gibbs free energy, but with the volume (V) replacing the entropy (S):ΔG = ΔH - TΔS + VΔPwhere ΔP is the difference in pressure between the two forms. At high pressures, the monoclinic form may become more stable since it has a smaller molar volume than the rhombic form. However, we do not have enough information to calculate the transition pressure.
Temperature increases may favor the stability of monoclinic sulfur, with a transition at around 95.6°C, while pressure increases may favor the stability of rhombic sulfur due to its higher density.
The stability of sulfur allotropes, specifically rhombic and monoclinic sulfur, depends on factors such as temperature and pressure. Rhombic sulfur has a density of 2.070 g/cm3 and a standard molar entropy of 31.80 J/(K mol). In contrast, monoclinic sulfur has a density of 1.957 g/cm3 and a standard molar entropy of 32.60 J/(K mol).
An increase in temperature can make monoclinic sulfur more stable than rhombic sulfur. This is because monoclinic sulfur has a higher entropy value than rhombic sulfur. When the temperature rises, the system tends to favor the allotrope with the higher entropy, as it allows for greater energy dispersal. The transition temperature at 1 bar, when monoclinic sulfur becomes more stable than rhombic sulfur, is approximately 95.6°C.
Regarding pressure, an increase in pressure would generally favor the allotrope with the higher density. In this case, rhombic sulfur has a higher density than monoclinic sulfur. Therefore, an increase in pressure is expected to make rhombic sulfur more stable than monoclinic sulfur.
To know more about stability, refer to the link below:
https://brainly.com/question/31323300#
#SPJ11
calculate the ph of a solution containing a. 200 ml of 0.1 m hcl and 8 ml of 2.5 m sodium acetate.
The pH of the buffer solution containing 200 mL of 0.1 M HCl and 8 mL of 2.5 M sodium acetate is approximately 4.76.
To calculate the pH of the solution, we need to first determine the moles of acid and base present in the solution, and then use the appropriate equations to calculate the concentration of H+ ions in the solution.
1. Moles of HCl:
Moles = concentration (M) x volume (L)
Moles of HCl = 0.1 M x 0.200 L = 0.020 moles
2. Moles of sodium acetate:
Moles = concentration (M) x volume (L)
Moles of sodium acetate = 2.5 M x 0.008 L = 0.020 moles
Since the moles of HCl and sodium acetate are equal, they will react completely to form a buffer solution. The acetate ion (from sodium acetate) will act as a weak base, and the HCl will act as a strong acid.
We can use the Henderson-Hasselbalch equation to calculate the pH of the buffer solution:
pH = pKa + log([A-]/[HA])
where pKa is the dissociation constant of the weak acid (in this case, acetic acid), [A-] is the concentration of the conjugate base (acetate ion), and [HA] is the concentration of the weak acid (acetic acid).
The pKa of acetic acid is 4.76.
3. Concentration of acetic acid:
The initial concentration of acetic acid is zero. It is generated by the reaction of sodium acetate with HCl.
Moles of acetic acid = moles of sodium acetate = 0.020 moles
Volume of the solution = 200 mL + 8 mL = 0.208 L
We add the moles of acetic acid to the original volume of the solution to get the final volume of the buffer solution. This is necessary because the acetic acid is generated by the reaction of sodium acetate with HCl.
[HA] = moles of acetic acid / volume of buffer solution
[HA] = 0.020 moles / 0.208 L
[HA] = 0.096 M
4. Concentration of acetate ion:
[Acetate ion] = moles of sodium acetate / volume of buffer solution
[Acetate ion] = 0.020 moles / 0.208 L
[Acetate ion] =
0.096 M
Now we can substitute the values of pKa, [A-], and [HA] into the Henderson-Hasselbalch equation to calculate the pH of the buffer solution:
pH = pKa + log([A-]/[HA])
pH = 4.76 + log(0.096/0.096)
pH = 4.76 + log(1)
pH = 4.76
Therefore, the pH of the buffer solution containing 200 mL of 0.1 M HCl and 8 mL of 2.5 M sodium acetate is approximately 4.76.
Visit to know more about pH:-
brainly.com/question/172153
#SPJ11
A 3.50 g sample of a diatomic gas in a 1.5 L container has a pressure of 2.42 atm at 355 K. Determine the identity of the gas. H2, N2, Cl2, O2, F2
The calculated molar mass (28.2g/mol) is closest to the molar mass of [tex]N_2[/tex] (28 g/mol). The identity of the diatomic gas is likely nitrogen ([tex]N_2[/tex]).
To determine the identity of the diatomic gas, we'll first need to find its molar mass using the Ideal Gas Law: PV = nRT.
1. Rearrange the Ideal Gas Law to solve for the number of moles (n):
n = PV / RT
2. Plug in the given values for pressure (P = 2.42 atm), volume (V = 1.5 L), and temperature (T = 355 K). Use the gas constant (R = 0.0821 L·atm/mol·K):
n = (2.42 atm * 1.5 L) / (0.0821 L·atm/mol·K * 355 K)
3. Calculate n:
n ≈ 0.124 mol
4. Find the molar mass of the gas by dividing the mass of the gas sample (3.50 g) by the number of moles (0.147 mol):
Molar mass ≈ 3.50 g / 0.124 mol ≈ 28.2 g/mol
5. Compare the calculated molar mass to the molar masses of the given diatomic gases:
- [tex]H_2[/tex]: 2 g/mol
- [tex]N_2[/tex]: 28 g/mol
- [tex]Cl_2[/tex]: 70.9 g/mol
- [tex]O_2[/tex]: 32 g/mol
- [tex]F_2[/tex]: 38 g/mol
To learn more about diatomic gas click here https://brainly.com/question/31370514
#SPJ11
How many grams of ice will melt if 246 kJ of heat are added to the system? The MW of water is 18.015 g/mol. H20 (s) --> H20 (1) AH = 6.02 kJ/mol
737.4 grams of ice will melt if 246 kJ of heat are added to the system. To answer this question, we need to use the equation: q = n * ΔH, where q is the amount of heat added, n is the number of moles of ice that melt, and ΔH is the enthalpy of fusion of ice.
First, we need to convert the given heat in kJ to J: 246 kJ = 246,000 J
Next, we need to calculate the number of moles of ice that melt. We can do this by dividing the amount of heat added by the enthalpy of fusion of ice: n = q / ΔH, n = 246,000 J / (6.02 kJ/mol), n = 40.9 mol
Finally, we can convert the number of moles of ice to grams using the molecular weight of water: m = n * MW, m = 40.9 mol * 18.015 g/mol, m = 737.4 g
Therefore, 737.4 grams of ice will melt if 246 kJ of heat are added to the system.
To know more about enthalpy of fusion, refer here:
https://brainly.com/question/20897184#
#SPJ11
h2(g) cl2(g)2hcl(g) using standard thermodynamic data at 298k, calculate the free energy change when 1.670 moles of h2(g) react at standard conditions. g°rxn = kj
To calculate the free energy change for the reaction h2(g) + cl2(g) -> 2hcl(g) at standard conditions, we will use standard thermodynamic data at 298K.
The standard free energy change of the reaction (ΔG°rxn) is given by the formula:
ΔG°rxn = ΣnΔG°f(products) - ΣnΔG°f(reactants)
Where ΣnΔG°f is the standard free energy of formation of the product or reactant, and n is the number of moles of that compound involved in the reaction.
From thermodynamic tables, we can find the standard free energy of formation for each compound:
ΔG°f(HCl(g)) = -92.31 kJ/mol
ΔG°f(H2(g)) = 0 kJ/mol
ΔG°f(Cl2(g)) = 0 kJ/mol
Substituting these values into the formula for ΔG°rxn, we get:
ΔG°rxn = (2 mol)(-92.31 kJ/mol) - (1.670 mol)(0 kJ/mol) - (1 mol)(0 kJ/mol)
ΔG°rxn = -184.62 kJ/mol
Therefore, the free energy change for the reaction of 1.670 moles of H2(g) with Cl2(g) to form 2 moles of HCl(g) at standard conditions is -184.62 kJ. Note that the negative sign indicates that the reaction is exergonic (i.e., spontaneous) under standard conditions.
Learn more about standard free energy here:
https://brainly.com/question/13421376
#SPJ11
If 30.10 mL of NaOH were required to titrate 10.00 mL of 0.2341 M H2SO4, what is the molarity of the NaOH solution?
The molarity of the NaOH solution is 0.1554 M. To get the molarity of the NaOH solution used to titrate 10.00 mL of 0.2341 M H2SO4 with 30.10 mL of NaOH, follow these steps:
Step:1. Write the balanced chemical equation for the reaction: H2SO4 + 2NaOH → Na2SO4 + 2H2O
Step:2. Calculate the moles of H2SO4: moles = Molarity × Volume = 0.2341 M × 0.010 L = 0.002341 moles
Step:3. Determine the stoichiometric ratio between H2SO4 and NaOH: 1:2 (1 mole of H2SO4 reacts with 2 moles of NaOH)
Step:4. Calculate the moles of NaOH required: 0.002341 moles H2SO4 × (2 moles NaOH / 1 mole H2SO4) = 0.004682 moles NaOH
Step:5. Determine the molarity of the NaOH solution: Molarity = moles / Volume = 0.004682 moles / 0.0301 L = 0.1554 M. So, the molarity of the NaOH solution is 0.1554 M.
Learn more about molarity here, https://brainly.com/question/14469428
#SPJ11
The molarity of the NaOH solution is 0.1554 M. To get the molarity of the NaOH solution used to titrate 10.00 mL of 0.2341 M H2SO4 with 30.10 mL of NaOH, follow these steps:
Step:1. Write the balanced chemical equation for the reaction: H2SO4 + 2NaOH → Na2SO4 + 2H2O
Step:2. Calculate the moles of H2SO4: moles = Molarity × Volume = 0.2341 M × 0.010 L = 0.002341 moles
Step:3. Determine the stoichiometric ratio between H2SO4 and NaOH: 1:2 (1 mole of H2SO4 reacts with 2 moles of NaOH)
Step:4. Calculate the moles of NaOH required: 0.002341 moles H2SO4 × (2 moles NaOH / 1 mole H2SO4) = 0.004682 moles NaOH
Step:5. Determine the molarity of the NaOH solution: Molarity = moles / Volume = 0.004682 moles / 0.0301 L = 0.1554 M. So, the molarity of the NaOH solution is 0.1554 M.
Learn more about molarity here, https://brainly.com/question/14469428
#SPJ11
What is the pH of a 0.100 M NH3 solution that has Kb = 1.8 x 10-5? The equation for the dissociation of NH3 is: NH3(aq) + H20(1) = NH4+(aq) + OH (aq) a. 11.13 b. 10.13 c. 2.87 d. 1.87
The pH of the 0.100 M NH₃ solution is 10.13. Option B is correct.
The dissociation of NH₃ in water is an example of a weak base. To find the pH of the solution, we need to first find the concentration of OH⁻ ions in the solution using the Kb value for NH₃.
The Kb expression for NH₃ is;
Kb = [NH₄⁺][OH⁻] / [NH₃]
We are given that the initial concentration of NH₃ is 0.100 M. At equilibrium, let x be the concentration of OH⁻ ions produced. Then the equilibrium concentrations of NH₄⁺ and NH₃ are also 0.100 M, since they are produced in a 1:1 ratio.
Substituting these values into the Kb expression gives;
1.8 x 10⁻⁵ = (0.100 x) / 0.100
x = [OH⁻] = 1.8 x 10⁻⁶ M
The concentration of OH⁻ ions is then used to find the pH of the solution using the equation;
pH = 14 - pOH
pH = 14 - (-log[OH⁻])
pH = 14 - (-log(1.8 x 10⁻⁶))
pH = 10.13
Hence, B. is the correct option.
To know more about dissociation here
https://brainly.com/question/31145781
#SPJ4
the solubility product for magnesium carbonate at 25 °c is 3.50×10−8. if 25.0 g of mgco3 is mixed with 100 ml of water, what is the value of [mg2 ] in the solution?
The concentration of [Mg²⁺] in the solution is approximately 5.92×10⁻⁵ M.
To find the concentration of [Mg²⁺] in the solution, we need to use the solubility product constant (Ksp) for magnesium carbonate (MgCO₃). The Ksp at 25°C is 3.50×10⁻⁸.
First, we can write the balanced chemical equation for the dissolution of MgCO₃:
MgCO₃(s) ⇌ Mg²⁺(aq) + CO₃²⁻(aq)
Since the Ksp = [Mg²⁺][CO₃²⁻], and the stoichiometry of the reaction is 1:1, we can assume that the concentrations of Mg²⁺ and CO₃²⁻ are equal in the solution. Let the concentration of Mg²⁺ be x.
Ksp = (x)(x) = x²
Now, we can solve for x:
x² = 3.50×10⁻⁸
x = √(3.50×10⁻⁸) ≈ 5.92×10⁻⁵ M
So, the concentration of [Mg²⁺] in the solution is approximately 5.92×10⁻⁵ M.
To learn more about stoichiometry, refer below:
https://brainly.com/question/30215297
#SPJ11
What general conclusions can you draw concerning the acidity or basicity of the hydroxides of the elements of the third period? Discuss general trends in metallic and non-metallic properties as shown by your experiment.
Third period hydroxides shows a general trend of increasing acidity and decreasing basicity from left to right, which is related to the metallic and non-metallic properties of the elements.
Based on the acidity and basicity of the hydroxides of elements in the third period, we can draw some general conclusions. Typically, as we move from left to right across the period, the acidity of hydroxides increases while the basicity decreases. This trend is related to the metallic and non-metallic properties of the elements.
Towards the left side of the period, elements exhibit more metallic properties, which results in their hydroxides being more basic. Examples include sodium (Na) and magnesium (Mg). As we progress towards the right side of the period, elements become more non-metallic, and their hydroxides display more acidic properties. Examples include phosphorus (P) and sulfur (S).
In summary, the acidity and basicity of hydroxides in the third period are influenced by the metallic and non-metallic properties of the elements. The trend shows that hydroxides become more acidic and less basic as we move from left to right across the period.
Know more about Hydroxide here:
https://brainly.com/question/21904397
#SPJ11
2HCl + Na2SO4 yields 2NaCl + H2SO4
If you start with 20.0 grams of hydrochloric acid, how many grams of sulfuric acid will be produced?
Answer:
26.90 grams of sulfuric acid
Explanation:
2HCl + Na2SO4 → 2NaCl + H2SO4
HCl = 36.46 g/mol
H2SO4 = 98.08 g/mol
Calculating 20 grams in HCI
n(HCl) = mass/molar mass
= 20.0 g/36.46 g/mol
= 0.5487 mol
2 moles of HCl produces 1 mole of H2SO4
n(H2SO4) = 0.5487 mol/2
= 0.2744 mol
Mass of H2SO4
mass(H2SO4) = n(H2SO4) x molar mass
= 0.2744 mol x 98.08 g/mol
= 26.90 g
Answer:
26.9 grams
Explanation:
This is a stoichiometry problem. To solve it, we need to determine the number of moles of hydrochloric acid (HCl) that are present in 20.0 grams of the substance. The molar mass of HCl is 36.46 g/mol, so 20.0 grams of HCl is equivalent to 20.0 g / 36.46 g/mol = 0.549 moles of HCl.
According to the balanced chemical equation you provided, two moles of HCl react with one mole of sodium sulfate (Na2SO4) to produce two moles of sodium chloride (NaCl) and one mole of sulfuric acid (H2SO4). This means that for every two moles of HCl that react, one mole of H2SO4 is produced.
Since we have 0.549 moles of HCl, we can expect to produce 0.549 moles / 2 = 0.275 moles of H2SO4.
The molar mass of H2SO4 is 98.08 g/mol, so 0.275 moles of H2SO4 is equivalent to 0.275 mol * 98.08 g/mol = 26.9 grams of sulfuric acid.
what is the halogen family?
halogen family : any of the six nonmetallic elements that constitute Group 17 (Group VII) of the periodic table. The halogen elements are fluorine (F), chlorine (Cl), bromine (Br), iodine (I), astatine (At), and tennessine (Ts).
a sample of an unknown substances has a heat capacity of 4.29 j/g °c and a mass of 9.9 kg. how much heat (in kcal) must be added to warm the solution from 7.9 °cto 94.5°c?
The amount of heat required to warm the substance from 7.9 °c to 94.5 °c is 907.3 kcal.
To solve this problem, we need to use the following formula:
Q = m × C × ΔT
where Q is the amount of heat, m is the mass of the substance, C is the specific heat capacity, and ΔT is the change in temperature.
We are given that the heat capacity (C) of the substance is 4.29 j/g °c and its mass (m) is 9.9 kg. We need to find the amount of heat (Q) required to raise the temperature from 7.9 °c to 94.5 °c.
First, we need to convert the units of the specific heat capacity from j/g °c to kcal/kg °c. We can do this by dividing 4.29 by 4.184 (the conversion factor between joules and calories) and multiplying by 1,000 (the conversion factor between calories and kilocalories):
C = 4.29 / 4.184 × 1,000 = 1.024 kcal/kg °c
Next, we can plug in the values into the formula:
Q = 9.9 kg × 1.024 kcal/kg °c × (94.5 °c - 7.9 °c)
Q = 9.9 kg × 1.024 kcal/kg °c × 86.6 °c
Q = 907.3 kcal
Therefore, the amount of heat required to warm the substance from 7.9 °c to 94.5 °c is 907.3 kcal.
Visit here to learn more about heat capacity : https://brainly.com/question/28302909
#SPJ11
A sample of oxygen had an initial volume of 4. 0L and was at a standard pressure of 1. 00 atm, what would the new volume be if the pressure was increased to 25. 00 atm?
Answer: 1.6 L
Explanation:
The new volume of the oxygen would be 0.16L when the pressure is increased to 25.00 atm.
The given problem can be solved using Boyle's law which states that when temperature and no. of moles of gas are constant the pressure is inversely proportional to volume.
let P1 = initial pressure
V1 = initial volume
and P2 = final pressure
V2 = final volume
Then from Boyle's law
P1V1=P2V2
V2=(P1V1)/P2
V2=(1.00atm*4.0L)/25.00atm
V2=0.16L
To learn more about volume:
https://brainly.in/question/16018604
Using the value of Ksp=6×10−51 for Ag2S, Ka1=9.5×10−8 andKa2=1×10−19 for H2S, and Kf=1.1×105 for AgCl−2, calculate theequilibrium constant for the following reaction:Ag2S(s)+4Cl−(aq)+2H+(aq)⇌2AgCl−2(aq)+H2S(aq)
The equilibrium constant for a given reaction is approximately 4.2×10⁻⁸⁹.
Balanced chemical equation for the given reaction will be:
Ag₂S(s) + 4Cl⁻(aq) + 2H⁺(aq) ⇌ 2AgCl⁻²(aq) + H₂S(aq)
The equilibrium constant expression will be written as;
K = [AgCl⁻²]²[H₂S]/[Ag₂S][Cl⁻]⁴[H⁺]²
We can express [AgCl⁻²] and [H₂S] in terms of the solubility product constant (Ksp) of Ag₂S and the acid dissociation constants (Ka₁ and Ka₂) of H₂S, respectively, as follows;
[AgCl⁻²] = (Kf[Ag⁺])/[Cl⁻]²
[H₂S] = [H⁺]HS⁻/(Ka₁ + [H⁺] + [HS⁻]/Ka₂)
where [Ag⁺] and [HS⁻] are the ionic concentrations of Ag⁺ and HS⁻, respectively, and Kf is the formation constant for AgCl⁻².
Substituting these expressions into the equilibrium constant expression gives;
K = (Kf[Ag+]²HS⁻)/(Ka₁[Cl⁻]⁴(Ka₂ + [H⁺] + [HS⁻]/Ka₂))
the given values of Ksp, Ka₁, Ka₂, and Kf into the above equation gives;
K = [(1.1×10⁵)([Ag+]²)([HS⁻])]/(9.5×10⁻⁸[Cl⁻]⁴(1×10⁻¹⁹ + [H⁺] + [HS⁻]/1×10⁻¹⁹))
Since Ag₂S is a sparingly soluble salt, we can assume that [Ag⁺] ≈ 0. Therefore, the equilibrium constant expression simplifies to;
K ≈ (1.1×10⁵)([HS⁻])/((9.5×10⁻⁸)([Cl⁻]⁴)(1×10⁻¹⁹))
Substituting the given values of Ksp, Ka₁, Ka₂, and Kf into this equation gives;
K ≈ (1.1×10⁵)(6×10⁻⁵¹)/(9.5×10⁻⁸)²
≈ 4.2×10⁻⁸⁹
To know more about equilibrium constant here
https://brainly.com/question/10038290
#SPJ4
what is the structure of the enol produced when 3,3,6-trimethyl-4-heptanone is treated with acid? i ii iii iv v
The acid-catalyzed treatment of 3,3,6-trimethyl-4-heptanone leads to the formation of an enol, which is an intermediate in the keto-enol tautomerization reaction.
When 3,3,6-trimethyl-4-heptanone is treated with acid, an enol is formed. The structure of the enol can be represented as follows:
i. The carbonyl group in the 3,3,6-trimethyl-4-heptanone is protonated by the acid.
ii. This leads to the formation of a resonance-stabilized intermediate, in which the positive charge is delocalized over the oxygen and the adjacent carbon atom.
iii. The double bond between the carbon and oxygen atoms in the intermediate shifts towards the adjacent carbon atom, forming a double bond between the carbon atoms and a single bond between the oxygen and carbon atoms.
iv. The resulting structure is an enol, with a hydroxyl group (-OH) attached to a carbon atom that is part of a double bond.
v. The enol structure can further undergo keto-enol tautomerization, in which the hydroxyl group is replaced by a carbonyl group, leading to the original ketone structure.
Overall, the acid-catalyzed treatment of 3,3,6-trimethyl-4-heptanone leads to the formation of an enol, which is an intermediate in the keto-enol tautomerization reaction.
Visit here to learn more about hydroxyl group : https://brainly.com/question/23639315
#SPJ11
The acid-catalyzed treatment of 3,3,6-trimethyl-4-heptanone leads to the formation of an enol, which is an intermediate in the keto-enol tautomerization reaction.
When 3,3,6-trimethyl-4-heptanone is treated with acid, an enol is formed. The structure of the enol can be represented as follows:
i. The carbonyl group in the 3,3,6-trimethyl-4-heptanone is protonated by the acid.
ii. This leads to the formation of a resonance-stabilized intermediate, in which the positive charge is delocalized over the oxygen and the adjacent carbon atom.
iii. The double bond between the carbon and oxygen atoms in the intermediate shifts towards the adjacent carbon atom, forming a double bond between the carbon atoms and a single bond between the oxygen and carbon atoms.
iv. The resulting structure is an enol, with a hydroxyl group (-OH) attached to a carbon atom that is part of a double bond.
v. The enol structure can further undergo keto-enol tautomerization, in which the hydroxyl group is replaced by a carbonyl group, leading to the original ketone structure.
Overall, the acid-catalyzed treatment of 3,3,6-trimethyl-4-heptanone leads to the formation of an enol, which is an intermediate in the keto-enol tautomerization reaction.
Visit here to learn more about hydroxyl group : https://brainly.com/question/23639315
#SPJ11
after how many years will the activity of a new sample of cobalt 60 be decreased to 1 8 its original value?
After 15.81 years will the activity of a new sample of cobalt 60 be decreased to 1/8 its original value.
Cobalt-60 has a half-life of roughly 5.27 years, which indicates that a sample's activity is reduced by half every 5.27 years. We may use the following formula to calculate how long it will take for the activity of a new sample of cobalt-60 to decline to 1/8 of its initial value.
t = t1/2 x log₂(Nf / Ni), time it takes for the activity to decrease is t, the half-life of cobalt-60 (5.27 years) is t1/2, the final activity (1/8 of the initial activity) Nf, and initial activity (1) is Ni. Plugging in the values, we get,
t = 5.27 years x log₂(1/8)
t = 5.27 years x log₂0.125
t = 5.27 years x (-3)
t = -15.81 years
The negative result here does not make sense because time cannot be negative. Therefore, we need to take the absolute value of the result, which gives,
t = 15.81 years
Thus, it will take approximately 15.81 years for the activity of a new sample of cobalt-60 to decrease to 1/8 its original value.
To know more about radioactivity, visit,
https://brainly.com/question/1236735
#SPJ4
Complete question - After how many years will the activity of a new sample of cobalt 60 be decreased to 1/8 its original value?
The ΔH∘vap of a certain compound is 29.93 kJ⋅mol−1 and its Δvap∘ is 83.12 J⋅mol−1⋅K−1.What is the normal boiling point of this compound?
The normal boiling point of the compound is approximately 450.4K
How to calculate the boiling point of a compound?The normal boiling point of a substance is the temperature at which its vapor pressure is equal to 1 atmosphere (atm). We can use the Clausius-Clapeyron equation to calculate the normal boiling point of the compound using the given information:
ln(P1/P2) = (-ΔHvap/R) * (1/T1 - 1/T2)
where P1 and P2 are the vapor pressures of the compound at temperatures T1 (normal boiling point) and T2 (known temperature), respectively, ΔHvap is the enthalpy of vaporization, R is the ideal gas constant (8.314 J/(mol*K)), and T1 and T2 are temperatures in Kelvin (K).
Given:
ΔHvap = 29.93 kJ/mol = 29.93 * 10^3 J/mol
ΔSvap = 83.12 J/(molK)
R = 8.314 J/(molK)
Plugging in the values:
ln(P1/1 atm) = (-29.93 * 10^3 J/mol)/(8.314 J/(molK) * T1) - (83.12 J/(molK)/T1)
Solving for Tb, we get:
Tb = (-ΔH∘vap/R) * (1/(ln(Pvap/1 atm)) + 1/Tref)
Substituting the given values, we get:
Tb = (-29.93 kJ⋅mol−1 / (8.314 J⋅mol−1⋅K−1)) * (1/(ln(Pvap/1 atm)) + 1/298 K)
Plugging in the values:
ln(P1/1 atm) = (-29.93 * 10^3 J/mol)/(8.314 J/(molK) * T1) - (83.12 J/(molK)/T1)
At the normal boiling point, the vapor pressure is 1 atm, so P1 = 1 atm.
Therefore, the normal boiling point of the compound is:
Tb = (-3602.2 K) * (1/(ln(1/1)) + 0.0033557)
Tb = 450.4 K
To know more about Clausius-Clapeyron equation:
https://brainly.com/question/15164257
#SPJ11
how many calcium ions are there in 2.64 mol ca3n2 ?
In 2.64 mol of Ca3N2, there are 7.92 mol of calcium ions (Ca2+). This is because there are 3 moles of Ca2+ for every mole of Ca3N2. To find the number of calcium ions, you can use Avogadro's number (6.022 x 10^23 ions/mol): (2.64 mol Ca3N2) x (3 mol Ca2+ / 1 mol Ca3N2) = 7.92 mol Ca2+ (7.92 mol Ca2+) x (6.022 x 10^23 ions/mol) ≈ 4.77 x 10^24 calcium ions.
To find the number of calcium ions in 2.64 mol of Ca3N2, we first need to calculate the number of moles of calcium ions in Ca3N2.
Ca3N2 is composed of three calcium ions (Ca2+) and two nitride ions (N3-). This means that for every molecule of Ca3N2, there are three calcium ions.
So, to find the number of moles of calcium ions in 2.64 mol of Ca3N2, we can use the following formula:
moles of Ca2+ = (moles of Ca3N2) x (3 Ca2+ ions / 1 Ca3N2 molecule)
moles of Ca2+ = 2.64 mol x (3 Ca2+ ions / 1 Ca3N2 molecule)
moles of Ca2+ = 7.92 mol
Therefore, there are 7.92 mol of calcium ions in 2.64 mol of Ca3N2.
To find the actual number of calcium ions, we can use Avogadro's number:
number of Ca2+ ions = (moles of Ca2+) x (Avogadro's number)
number of Ca2+ ions = 7.92 mol x (6.022 x 10^23 ions/mol)
number of Ca2+ ions = 4.77 x 10^24 ions
So, there are approximately 4.77 x 10^24 calcium ions in 2.64 mol of Ca3N2.
Learn more about calcium ions here:
https://brainly.com/question/28504818
#SPJ11
moving from less condensed phases to more condensed phases is an exothermic process, and the reverse is an endothermic process. group of answer choicestruefalse
It is True. Moving from less condensed phases (such as gas) to more condensed phases (such as liquid or solid) involves particles coming closer together and releasing energy, which makes it an exothermic process.
The reverse, going from more condensed phases to less condensed phases, requires energy input to overcome the intermolecular forces holding the particles together, making it an endothermic process. Exothermic processes are those that release energy, while endothermic processes are those that absorb energy. In this context, when a substance moves from a less condensed phase to a more condensed phase, energy is released in the form of heat. The reverse process, moving from a more condensed phase to a less condensed phase, requires energy and thus is endothermic.
To learn more about exothermic process click here https://brainly.com/question/12321421
#SPJ11
1. Describe the earth's early atmosphere and how oxygen was developed in the atmosphere.
2. Explain the theory of the development of the earth's atmosphere and how oceans were formed.
3. Explain why the compositions of the earth's atmosphere has not changed much for 200 million years.
Explanation:
1. Describe the earth's early atmosphere and how oxygen was developed in the atmosphere.
When Earth formed 4.6 billion years ago from a hot mix of gases and solids, it had almost no atmosphere. The surface was molten. As Earth cooled, an atmosphere formed mainly from gases spewed from volcanoes. It included hydrogen sulfide, methane, and ten to 200 times as much carbon dioxide as today's atmosphere.
2. Explain the theory of the development of the earth's atmosphere and how oceans were formed.
Many scientists believe that water was present when the Earth was formed. Then the process of outgassing water molecules into the atmosphere, which then rained onto the surface of the Earth as the atmosphere cooled, created the ocean
3. Explain why the compositions of the earth's atmosphere has not changed much for 200 million years.
The atmosphere has stabilized over time as ecosystems have saturated with life.
The atmosphere has stabilized over time as ecosystems have saturated with life.The oceans have stabilized since then as well, as the oceans and atmosphere have strong interactions.
The atmosphere has stabilized over time as ecosystems have saturated with life.The oceans have stabilized since then as well, as the oceans and atmosphere have strong interactions.Life is the source of free oxygen. For the atmosphere to change from where it is now there must be a significant change in the amount of photosynthetic organisms, which changes depend mostly on temperature.
The atmosphere has stabilized over time as ecosystems have saturated with life.The oceans have stabilized since then as well, as the oceans and atmosphere have strong interactions.Life is the source of free oxygen. For the atmosphere to change from where it is now there must be a significant change in the amount of photosynthetic organisms, which changes depend mostly on temperature.If there is a major change in temperature such as a new ice age then you might see a significant change in the Earth’s atmosphere
please make me brainalist and keep smiling dude I hope you will be satisfied with my answer
how many half-lives are required for uranium to decay to 12.5 of its original value
It takes 3 half-lives for uranium to decay to 12.5% of its original value.
To determine how many half-lives are required for uranium to decay to 12.5% of its original value, we can use the following formula:
Final amount = Initial amount x (1/2)^(number of half-lives)
If we let the final amount be 12.5% of the initial amount, or 0.125, we can solve for the number of half-lives:
0.125 = 1 x (1/2)^(number of half-lives)
Taking the logarithm of both sides, we get:
log(0.125) = log(1/2)^number of half-lives
Using the logarithmic property that log(a^b) = b*log(a), we can rewrite the right side as:
log(0.125) = number of half-lives x log(1/2)
Dividing both sides by log(1/2), we get:
number of half-lives = log(0.125) / log(1/2)
Using a calculator, we find that number of half-lives is approximately 3. This means that it takes 3 half-lives for uranium to decay to 12.5% of its original value.
Know more about Half-life here:
https://brainly.com/question/24710827
#SPJ11
rovide a structure for the given compound. c6h12o2;c6h12o2; ir: 1743 cm−1;1743 cm−1; h1h1 nmr spectrum
Based on the given information, it is not possible to provide a definitive structure for the compound C6H12O2. However, we can make some general assumptions based on the provided data. The IR spectrum shows a peak at 1743 cm-1, which suggests the presence of a carbonyl group (C=O).
The IR spectrum shows a peak at 1743 cm-1, which suggests the presence of a carbonyl group (C=O). This could indicate the presence of a ketone or an ester functional group in the compound.
The H1 NMR spectrum would provide further information about the compound's structure, such as the number and type of protons present, and their relative positions. However, this information is not provided in the question.
Without additional information, it is not possible to determine the exact structure of the compound. It could be one of several isomers with the same molecular formula.
Hi! I'm happy to help you with your question. Based on the provided information, you are asked to determine the structure of a compound with the molecular formula C6H12O2, which has an IR peak at 1743 cm⁻¹ and specific features in the H1 NMR spectrum.
1. The molecular formula C6H12O2 suggests a degree of unsaturation of 1. This can indicate either a double bond or a ring structure in the compound.
2. The IR peak at 1743 cm⁻¹ indicates the presence of a carbonyl group (C=O), specifically suggesting an ester, since it falls within the ester carbonyl range (1730-1750 cm⁻¹).
Now, to provide a structure for this compound, we need more information about the H1 NMR spectrum, such as the number of signals, their integration, and their splitting patterns. This information will help us determine the arrangement of the hydrogen atoms and the overall structure of the compound.
Once you provide the H1 NMR spectrum details, I can help you with the next steps to determine the compound's structure.
Based on the given information, it is not possible to provide a definitive structure for the compound C6H12O2. However, we can make some general assumptions based on the provided data. The IR spectrum shows a peak at 1743 cm-1, which suggests the presence of a carbonyl group (C=O).
The IR spectrum shows a peak at 1743 cm-1, which suggests the presence of a carbonyl group (C=O). This could indicate the presence of a ketone or an ester functional group in the compound.
The H1 NMR spectrum would provide further information about the compound's structure, such as the number and type of protons present, and their relative positions. However, this information is not provided in the question.
Without additional information, it is not possible to determine the exact structure of the compound. It could be one of several isomers with the same molecular formula.
Hi! I'm happy to help you with your question. Based on the provided information, you are asked to determine the structure of a compound with the molecular formula C6H12O2, which has an IR peak at 1743 cm⁻¹ and specific features in the H1 NMR spectrum.
1. The molecular formula C6H12O2 suggests a degree of unsaturation of 1. This can indicate either a double bond or a ring structure in the compound.
2. The IR peak at 1743 cm⁻¹ indicates the presence of a carbonyl group (C=O), specifically suggesting an ester, since it falls within the ester carbonyl range (1730-1750 cm⁻¹).
Now, to provide a structure for this compound, we need more information about the H1 NMR spectrum, such as the number of signals, their integration, and their splitting patterns. This information will help us determine the arrangement of the hydrogen atoms and the overall structure of the compound.
Once you provide the H1 NMR spectrum details, I can help you with the next steps to determine the compound's structure.
if a reaction mixture initially contains 0.159 mso2cl2mso2cl2 , what is the equilibrium concentration of cl2cl2 at 227 ∘c∘c ?
the equilibrium concentration of Cl₂ at 227°C is 0.0996 M.
To find the equilibrium concentration of Cl₂, we need to know the balanced chemical equation and the equilibrium constant (Kc) for the reaction.
The balanced chemical equation for the reaction is:
SO₂Cl₂ (g) ⇌ SO₂ (g) + Cl₂ (g)
The equilibrium constant (Kc) expression for this reaction is:
Kc = [SO₂][Cl₂] / [SO₂Cl₂]
We are given the initial concentration of SO₂Cl₂ as 0.159 M. Let's assume that at equilibrium, the concentration of SO₂ is x M and the concentration of Cl₂ is also x M.
Using the equilibrium constant expression:
Kc = [SO₂][Cl₂] / [SO₂Cl₂]
Kc = (x)(x) / (0.159 - x)
We can solve for x using the quadratic equation:
Kc = x² / (0.159 - x)
1.77 = x² / (0.159 - x)
0 = x² - (0.28263)x + 0.0283031
Using the quadratic formula:
x = (-b ± √(b^2 - 4ac)) / 2a
x = (-(-0.28263) ± √((-0.28263)² - 4(1)(0.0283031))) / 2(1)
x = 0.0996 M (ignoring the negative root since it is not physically meaningful)
Therefore, the equilibrium concentration of Cl₂at 227°C is 0.0996 M.
To learn more about equilibrium concentration https://brainly.com/question/13414142
#SPJ11
the equilibrium concentration of Cl₂ at 227°C is 0.0996 M.
To find the equilibrium concentration of Cl₂, we need to know the balanced chemical equation and the equilibrium constant (Kc) for the reaction.
The balanced chemical equation for the reaction is:
SO₂Cl₂ (g) ⇌ SO₂ (g) + Cl₂ (g)
The equilibrium constant (Kc) expression for this reaction is:
Kc = [SO₂][Cl₂] / [SO₂Cl₂]
We are given the initial concentration of SO₂Cl₂ as 0.159 M. Let's assume that at equilibrium, the concentration of SO₂ is x M and the concentration of Cl₂ is also x M.
Using the equilibrium constant expression:
Kc = [SO₂][Cl₂] / [SO₂Cl₂]
Kc = (x)(x) / (0.159 - x)
We can solve for x using the quadratic equation:
Kc = x² / (0.159 - x)
1.77 = x² / (0.159 - x)
0 = x² - (0.28263)x + 0.0283031
Using the quadratic formula:
x = (-b ± √(b^2 - 4ac)) / 2a
x = (-(-0.28263) ± √((-0.28263)² - 4(1)(0.0283031))) / 2(1)
x = 0.0996 M (ignoring the negative root since it is not physically meaningful)
Therefore, the equilibrium concentration of Cl₂at 227°C is 0.0996 M.
To learn more about equilibrium concentration https://brainly.com/question/13414142
#SPJ11
calculate the ph after 0.010 mol gaseous hcl is added to 250.0 ml of each of the following buffered solutions. a. 0.050 m nh3/0.15 m nh4cl b. 0.50 m nh3/1.50 m nh4cl
To solve this problem, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the pKa and the ratio of the concentrations of the weak acid and its conjugate base.
a. For the buffered solution of 0.050 M [tex]NH_{3}[/tex] and 0.15 M [tex]NH_{4} Cl[/tex], the pH changes from approximately 10.22 to 9.90 after adding 0.010 mol of gaseous HCl:
pH = 9.25 + log([[tex]NH_{4}^{+}[/tex]]/[[tex]NH_{3}[/tex]])
Before adding HCl: pH = 9.25 + log(0.15/0.050) ≈ 10.22
After adding HCl: [[tex]NH_{4}^{+}[/tex]] = 0.15 M + 0.010 mol / 0.250 L = 0.19 M
[[tex]NH_{3}[/tex]] = 0.050 M - 0.010 mol / 0.250 L = 0.010 M
pH = 9.25 + log(0.19/0.010) ≈ 9.90
b. For the buffered solution of 0.50 M [tex]NH_{3}[/tex] and 1.50 M [tex]NH_{4} Cl[/tex], the pH changes from approximately 11.26 to 10.95 after adding 0.010 mol of gaseous HCl:
pH = 9.25 + log([[tex]NH_{4}^{+}[/tex]]/[[tex]NH_{3}[/tex]])
Before adding HCl: pH = 9.25 + log(1.50/0.50) ≈ 11.26
After adding HCl: [[tex]NH_{4}^{+}[/tex]] = 1.50 M + 0.010 mol / 0.250 L = 1.90 M
[[tex]NH_{3}[/tex]] = 0.50 M - 0.010 mol / 0.250 L = 0.010 M
pH = 9.25 + log(1.90/0.010) ≈ 10.95
Learn more about buffer solution
https://brainly.com/question/31367305
#SPJ4
A 0.3389 g sample of an unknown acid requires 41.02 mL of the standardized NaOH for neutralization to a phenolphthalein end point
a. How many moles of OH- are used?
b. How many moles of H+ are there in the solid acid?
c. What is the equivalent mass, in grams, of the unknown acid?
a. The number of moles of OH- used is 0.04102 mol.
b. The number of moles of H+ in the solid acid is also 0.04102 mol. c. The equivalent mass of the unknown acid is 8.26 g/eq.
a. To determine the number of moles of OH- used, we need to use the formula:
moles of OH- = volume of NaOH x molarity of NaOH
where the volume of NaOH used is 41.02 mL or 0.04102 L (remember to convert mL to L), and the molarity of NaOH is known as it is standardized. Therefore, the number of moles of OH- used is:
moles of OH- = 0.04102 L x 0.1 mol/L = 0.004102 mol
b. Since the acid is neutralized by the same number of moles of OH-, the number of moles of H+ in the acid is also 0.004102 mol.
c. The equivalent mass of an acid is the mass of the acid that can donate one mole of H+ ions. It is calculated by dividing the molar mass of the acid by its acidity (or basicity) in equivalents. To find the acidity of the acid, we can use the formula:
acidity = moles of H+ / moles of acid
where the moles of H+ is 0.004102 mol (from part b) and the moles of acid can be calculated using the acid's molecular weight:
moles of acid = mass of acid / molecular weight
where the mass of the acid is given as 0.3389 g and the molecular weight is unknown. However, we can use the balanced chemical equation for the neutralization reaction to determine the molecular weight. Assuming the acid is monoprotic, the balanced equation is:
HX + NaOH → NaX + H₂O
where HX represents the acid. The equation shows that one mole of HX reacts with one mole of NaOH, which means that the molecular weight of HX is equal to the molar mass of NaOH, which is 40.00 g/mol. Therefore, the moles of acid is:
moles of acid = 0.3389 g / 40.00 g/mol = 0.0084725 mol
Now we can calculate the acidity:
acidity = 0.004102 mol / 0.0084725 mol = 0.484
Finally, the equivalent mass of the acid is:
equivalent mass = molecular weight / acidity
equivalent mass = (0.3389 g / 0.0084725 mol) / 0.484 = 8.26 g/eq.
learn more about molarity here:
https://brainly.com/question/8732513
#SPJ11