Answer:
creativity is the personal trait that scientists mainly depend upon when they design an experiment.
How many total ions are in 2.95 g of magnesium sulfite?
Answer:
Approximately [tex]5.65 \times 10^{-2}\; \rm mol[/tex], which is approximately [tex]3.41 \times 10^{22}[/tex] particles.
Explanation:
Formula of magnesium sulfite: [tex]\rm MgSO_3[/tex].
Look up the relative atomic mass of [tex]\rm Mg[/tex]. [tex]\rm S[/tex], and [tex]\rm O[/tex] on a modern periodic table:
[tex]\rm Mg[/tex]: [tex]24.305[/tex].[tex]\rm S[/tex]: [tex]32.06[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].The ionic compound [tex]\rm MgSO_3[/tex] consist of magnesium ions [tex]\rm {Mg}^{2+}[/tex] and sulfite ions [tex]\rm {SO_3}^{2-}[/tex].
Notice that [tex]\rm {Mg}^{2+}\![/tex] and [tex]\rm {SO_3}^{2-}\![/tex] combine at a one-to-one ratio to form the neural compound [tex]\rm MgSO_3[/tex]. Therefore, each [tex]\rm MgSO_3\![/tex] formula unit would include one [tex]\rm {Mg}^{2+}[/tex] ion and one [tex]\rm {SO_3}^{2-}[/tex] ion (that would be two ions in total).
Calculate the formula mass of one such formula unit:
[tex]\begin{aligned}&\; M(\mathrm{MgSO_3}) \\ = & \; 24.305 + 32.06 + 3 \times 15.999 \\ = & \; 104.362\; \rm g \cdot mol^{-1}\end{aligned}[/tex].
In other words, the mass of one mole of [tex]\rm MgSO_3[/tex] formula units (which includes one mole of [tex]\rm {Mg}^{2+}[/tex] ions and one mole of [tex]\rm {SO_3}^{2-}[/tex] ions) would be [tex]104.362\; \rm g[/tex].
Calculate the number of moles of such formula units in that [tex]2.95\; \rm g[/tex] of [tex]\rm MgSO_3[/tex]:
[tex]\begin{aligned}n&= \frac{m}{M}\\ &=\frac{2.95\; \rm g}{104.362\; \rm g \cdot mol^{-1}} \approx 2.82670 \times 10^{-2}\; \rm mol\end{aligned}[/tex].
There are two moles of ions in each mole of [tex]\rm MgSO_3[/tex] formula units. Therefore, that [tex]2.82670 \times 10^{-2}\; \rm mol[/tex] of [tex]\rm MgSO_3\![/tex] formula units would include approximately [tex]2 \times 2.82670 \times 10^{-2}\; \rm mol \approx 5.65\times 10^{-2}\; \rm mol[/tex] of ions.
scientific notation, fill in the blank.
7.95x10^7 = [ ? ]x 10^6
Answer:
79.5
Explanation:
7.95x10^7 IS 79500000.
If you bring the decimal point left 6 more times it would be 79.500000
Fun fact! <3
An apple, potato, and onion all taste the same if you eat them with your nose plugged
Answer:
:O Fr? Bet let me go get them lol
✧ Yes, since one of our senses are missing we won't really detect the taste.
Explanation: Think about it, we usually smell food and we can already tell if it's going to taste good or not. Looking or touching food doesn't always help to know if we will like the taste. ✧
Can someone help me on this letter E please
how many moles of methane are in 7.31*10^25 molecules?
121 mol CH₄
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Organic
Writing chemical compoundsWriting organic structuresPrefixesAlkanes, Alkenes, AlkynesAtomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:Step 1: Define
7.31 × 10²⁵ molecules CH₄
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[tex]\displaystyle 7.31 \cdot 10^{25} \ molecules \ CH_4(\frac{1 \ mol \ CH_4}{6.022 \cdot 10^{23} \ molecules \ CH_4} ) = 121.388 \ mol \ CH_4[/tex]
Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
121.388 mol CH₄ ≈ 121 mol CH₄
How many molecules are there in 31.8 moles of water?
1.91 x 1025 molecules
1.91 x 1022
5.28 x 10-23 molecules
5.28x 10.25
Answer:
[tex]31.8\ moles = 1.91 * 10^{25}\ molecules[/tex]
Explanation:
Given
31.8 moles of water
Required
Determine the number of molecule
In standard units: 1 molecule of water is:
[tex]1\ mole = 6.022 * 10^{23}\ molecules[/tex]
Multiply both sides by 31.8
[tex]31.8 * 1\ mole = 31.8 * 6.022 * 10^{23}\ molecules[/tex]
[tex]31.8\ moles = 31.8 * 6.022 * 10^{23}\ molecules[/tex]
[tex]31.8\ moles = 191.4996 * 10^{23}\ molecules[/tex]
Express 191.4996 as a standard form
[tex]31.8\ moles = 1.914996 * 10^2 * 10^{23}\ molecules[/tex]
Apply law of indices:
[tex]31.8\ moles = 1.914996 * 10^{2+23}\ molecules[/tex]
[tex]31.8\ moles = 1.914996 * 10^{25}\ molecules[/tex]
Approximate:
[tex]31.8\ moles = 1.91 * 10^{25}\ molecules[/tex]
Please help If You Are Able To. Where do these go?
Answer:
Sorry can't help
Explanation:
Cant help!
The sun is located in the center of our solar system. Where is the sun located in our disc-shaped
galaxy?
*Answer:-*
The sun is about 1/3 the distance from the center of the Milky Way galaxy to its outer edges. It's located in a smaller spiral arm, between two large arms, called the Orion Arm.
How many
How long does it take to go
from a new moon to a third
quarter?
Answer:
about three weeks
Explanation:
because after a full moon, which is about 21 days, it comes to a third quarter moon
How many moles are in 7.91 X 1022 atoms of He?
Answer:
amount of He = (7.91 × 10^22) ÷ (6.02 × 10^23) = 0.131mol (3sf)
Explanation:
you make use of the mole concept formula
amount(mol) = number of particles ÷ 6.02 × 10^23
(6.02 × 10^23 is the avogadro constant, which is an extremely important number in this formula for mole concept)
What is the mass of a 270 cm3 sample of a metal with density of 3.66 g/cm3?
Answer:
988.2 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volume
From the question we have
mass = 3.66 × 270
We have the final answer as
988.2 gHope this helps you
If the gas tap to the Bunsen burner is turned on, the methane does not start burning until it is lit with a match. Why is heat from the match needed to start the methane burning?
Answer:
The reaction has a high activation energy
Explanation:
The burning of methane is a spontaneous reaction. Once the burning begins, the flame is able to sustain itself without any additional input of energy. It is an exothermic reaction in which energy is given out in the form of heat.
The reason why heat from the match is needed to start the burning of methane is that the activation energy of the combustion of methane is high. Activation energy is the energy that must be supplied in order for the collision of reactants to result in chemical reaction.
As long as the activation energy is high, the reaction can not occur without an external input of energy (e.g striking a match). Hence the answer.
How many hydrogen atoms Is needed for C4H8 to become saturated
Answer:
2 atoms
Explanation:
Because it contain one double bond
Emilio wants to tell a friend where an element's name is located within it's box in the periodic table. Which of the following is an accurate explanation to find an element's name?
the name is at the top of the box
the name is the large letter or letter combination in the box
the name is the word below the large letter combination in the box
the name is the last piece of information in the box
Answer:
A
Explanation:
hope this helps!
The name is the word below the large letter combination in the box
Density can be calculated by dividing an object's mass by its volume. If the mass of an object is 10 grams and its volume is 2 milliliters, what is its density?
Explanation:
mass =10g. volume=2ml. density=mass/volume = 10/2=5kg/m^3Answer:
5 g/mL
Explanation:
So, if the mass is 10 g and the volume is 2 mL, the density equals...
10 g ÷ 2 mL = 5 g/mL
The answer is not 53.4. Please help.
Answer:
it is 0.528 ATM.
Explanation:
What mass of potassium would react with excess chlorine to produce 156 g of potassium chloride?
____ K + ____ Cl2 ____ KCl
Answer:
Explanation:
Oxygen is prepared by catalytic decomposition of potassium chlorine (KClO3). Decomposition of potassium, chloride gives potassium chloride (KCl) and oxygen (O2). How many moles and how many grams of KClO3 are required to produce 2.4 mole O2?
A crystal of quartz may be part of granite, sandstone, and the
metamorphic rock quartzite. Identify how that same crystal could be
found in all three rocks at different times.
HELP ME WITH THIS QUESTION
Why is calcium carbonate preferred over lumps of calcium carbonate for synthesis of calcium chloride
Answer:
it reacts to limestone better and is a bit more firmer and mostly preferred over because of how fast it can react towards chemicals
PLEASE HELP ASAP Chet is creating a catapult that will allow him to propel a ball farther than he is capable of throwing it. As he is creating the device, he finds that that catapult launches the ball straight up into the air. The catapult should propel the ball up and forward to create a trajectory.
Which of the following is the best solution to this problem?
A.
leave the design as is because the ball goes higher than he can throw it
B.
make changes to the design to allow it to launch the ball a farther distance
C.
discard the device and begin the engineering process again from the start
D.
leave the design as is but perform more tests to see if the problem improves
Answer:
IM NOT COMPLETELY SURE BUT ITS ETHER A OR B IM SORRY ;//
Explanation:
help me with cience for brainest:) its easy:)
Answer:
Stronger
And its science
Explanation:
Answer:
stronger for top.
weaker for bottom.
passed all sciences in freshman year :D
What happens to water when it freezes?
its mass increases
its mass decreases
its density increases
its density decreases
Explanation:
When an object undergoes a physical change (solid to liquid, decrease in temperature etc.), the mass of the object remains constant.
When water freezes, the water molecules vibrate closer to one another and there is less space between the molecules.
The same number of water molecules now occupy a smaller volume, therefore their density increases.
The correct answer is the 3rd option.
At the time when the water should be freezed so here the density should be decreased.
What is density?The density refers to the mass of the unit volume with respect to the material substance.
The formula for density should be d = M/v
So here d means the density
And, m means mass
V means the volume
So it should be expressed in units with respect to the units of grams per cubic centimeter.
Hence the last option is correct.
Learn more about water here: https://brainly.com/question/24720645
Describe the brightness and temperature of the stars classified as giants.
Answer:
A hotter star should be brighter than a cooler star. ... Although they are cool [red], they are very luminous, and therefore bright. In the Main Sequence, stars that are cool are not as luminous. Because the energy is spread across a larger area, surface temperatures are actually cooler, reaching only 2,200 to 3,200 degrees Celsius (4,000 to 5,800 degrees Fahrenheit), a little over half as hot as the sun
Explanation:
Question 11 of 25
How do home computer scanners use electromagnetic waves?
A. The waves are absorbed or reflected to capture images or
information
B. The scanners change information received into modified radio
waves
C. The waves are absorbed by objects, making them warmer.
D. The waves make objects brighter, making them easier to see.
Ffff
Answer:
a.The waves are absorbed or reflected to capture images
Explanation:
How Things Work: TSA scanners use electromagnetic waves for detection. ... These waves are bounced off the body of the person being scanned to create a three-dimensional image on the computer. The backscatter units instead bounce low-level electromagnetic X-rays off the body to create an image on the computer
Answer:
A. The waves are absorbed or reflected to capture images or
information
Explanation:
What is a daughter element
Answer:
The element formed when a radioactive element undergoes radioactive decay. The latter is called the parent. The daughter may or may not be radioactive.
Explanation:
hope this helps
What conversion factors
determine the number of
molecules from the number of
moles of a compound?
Answer: Avogrado's number, or 6.022 x 10^23
Explanation:
To convert from moles to atoms, multiply the molar amount by Avogadro's number. To convert from atoms to moles, divide the atom amount by Avogadro's number (or multiply by its reciprocal).
The temperature of a city during a week was 35° C, 36°C, 34°C, 38°C, 40°C, 39°C and 44°C. What was the average daily temperature of the town for the week?
Answer:38°
Explanation:
The monomers of carbohydrates are called?
Answer:
monosaccharides
Explanation:
Monomers of carbohydrates are simple sugars and the basic building blocks of carbohydrates, they are also known as monosaccharides and are used by the cells of living things to store and produce energy.
Answer:
"the simple sugars" or Monosaccharides
Explanation:
Monosaccharides are the monomers of carbohydrates they are mostly called or referred to as "the simple sugars" hope this helped have a nice day (:
plz mark brainliest (:
Can you please help me ASAP
Answer:
The Milky Way is a large barred spiral galaxy
Explanation: that has more than etc
Hi guys . I'm having some troubles with physics and chemistry .
Do you know any sites or apps that can help me with any topic in physics and chemistry ( apart from Khan academy ) ?
Note : The site or app has to be able to teach and explain topics in Physics and Chemistry .
Explanation:
byju's ig. Cause it gives a proper concept