Answer:
answer the correct is B
Explanation:
For the interference phenomenon to occur, some conditions must be met.
* You must have a light in phase and coherent, for this you can for a light from an incandescent source through a single slit, the light that comes out is coherent
* This light must strike two slits
* the light that passes through the slits must hit a distant screen and be able to see the phenomenon of constructive interference
when examining the different answer the correct one is B
For the criteria for the two-source interference, Option B is correct.
What is two-source interference?Wave interference happens when two waves collide while traveling through the same medium.
Wave interference causes the medium to take on a form determined by the total effect of the two distinct waves on the medium's particles.
The scenarios that fit all of the criteria for the two-source interference equations will be light from an incandescent bulb shining onto a screen with a single slit.
Then the light shines onto a screen with two slits in it and the light from the two slits finally shines onto a far-away screen.
Hence for the criteria for the two-source interference, Option B is correct.
To learn more about the two-source interference refer to the link;
https://brainly.com/question/14420120
What is the SI unit for momentum?
0 kg.m
m
O kg
S
m
O kg
S
O kg •
m
In a science fiction novel two enemies, Bonzo and Ender, are fighting in outer spce. From stationary positions, they push against each other. Bonzo flies off with a velocity of 1.1 m/s, while Ender recoils with a velocity of -4.3 m/s. Determine the ratio Bonzo/mEnder of the masses of these two enemies.
Answer:
the ratio Bonzo/mEnder of the masses of these two enemies is 3.91
Explanation:
Given the data in the question;
Velocity of Bonzo [tex]V_{Bonzo[/tex] = 1.1 m/s
Velocity of Ender [tex]V_{Ender[/tex] = -4.3 m/s
the ratio Bonzo/mEnder of the masses of these two enemies = ?
Now, using the law of conservation of momentum.
momentum of both Bonzo and Ender are conserved
so
Initial momentum = final momentum
we have
0 = [tex]m_{Bonzo[/tex] × [tex]V_{Bonzo[/tex] + [tex]m_{Ender[/tex] × [tex]V_{Ender[/tex]
[tex]m_{Bonzo[/tex] × [tex]V_{Bonzo[/tex] = -[ [tex]m_{Ender[/tex] × [tex]V_{Ender[/tex] ]
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = -[ [tex]V_{Ender[/tex] / [tex]V_{Bonzo[/tex] ]
we substitute
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = -[ -4.3 m/s / 1.1 m/s ]
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = -[ -3.9090 ]
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = 3.91
Therefore, the ratio Bonzo/mEnder of the masses of these two enemies is 3.91
Definition of Xenophobia
Answer:
dislike of or prejudice against people from other countries.
Explanation:
Answer: dislike of or prejudice against people from other countries.
Explanation:
A force of 1.35 newtons is required to accelerate a book by 1.5 meters/second2 along a frictionless surface. What is the mass of the book?
Answer:
0.9 kg
Explanation:
We would use the equation F=m*a to solve this equation. First, we would need to get mass by itself therefore we divide out acceleration from both sides ( F/a=m*a / a ) acceleration would cancel out and the end equation should look like this ( F/a = m or m = F/a) After we do that we plug in the numbers 1.35 N / 1.5 m/s^2 we get 0.9 kg, assuming you are using kg.
Answer: 0.90 kilograms
Explanation:
A spring stretches 0.150 m when a 0.30 kg mass is hung from it. The spring is then stretched an additional 0.100 m from this equilibrium point and released. Determine
a) the spring constant
b) the maximum velocity of the mass
c) the maximum acceleration of the mass
d) the total mechanical energy of the mass
e) the period and frequency of the mass and spring and
f) the equation of time-dependent vertical position of the mass
Answer:
a) [tex]k=19.6N/m[/tex]
b) [tex]V_m=0.81m/s[/tex]
c) [tex]a_m=6.561m/s^2[/tex]
d) [tex]K.E=0.096J[/tex]
e) [tex]T=0.78sec[/tex] &[tex]F=1.29sec[/tex]
f) [tex]mx'' + kx' =0[/tex]
Explanation:
From the question we are told that:
Stretch Length [tex]L=0.150m[/tex]
Mass [tex]m=0.30kg[/tex]
Total stretch length[tex]L_t=0.150+0.100=>0.25[/tex]
a)
Generally the equation for Force F on the spring is mathematically given by
[tex]F=-km\\\\k=F/m\\\\k=\frac{m*g}{x}\\\\k=\frac{0.30*9.8}{0.15}[/tex]
[tex]k=19.6N/m[/tex]
b)Generally the equation for Max Velocity of Mass on the spring is mathematically given by
[tex]V_m=A\omega[/tex]
Where
A=Amplitude
[tex]A=0.100m[/tex]
And
[tex]\omega=angulat Velocity\\\\\omega=\sqrt{\frac{k}{m}}\\\\\omega=\sqrt{\frac{19.6}{0.3}}\\\\\omega=8.1rad/s[/tex]
Therefore
[tex]V_m=A\omega\\\\V_m=8.1*0.1[/tex]
[tex]V_m=0.81m/s[/tex]
c)
Generally the equation for Max Acceleration of Mass on the spring is mathematically given by
[tex]a_m=\omega^2A[/tex]
[tex]a_m=8.1^2*0.1[/tex]
[tex]a_m=6.561m/s^2[/tex]
d)
Generally the equation for Total mechanical energy of Mass on the spring is mathematically given by
[tex]K.E=\frac{1}{2}mv^2[/tex]
[tex]K.E=\frac{1}{2}*0.3*0.8^2[/tex]
[tex]K.E=0.096J[/tex]
e)
Generally the equation for the period T is mathematically given by
[tex]\omega=\frac{2\pi}{T}[/tex]
[tex]T=\frac{2*3.142}{8.1}[/tex]
[tex]T=0.78sec[/tex]
Generally the equation for the Frequency is mathematically given by
[tex]F=\frac{1}{T}[/tex]
[tex]F=1.29sec[/tex]
f)
Generally the Equation of time-dependent vertical position of the mass is mathematically given by
[tex]mx'' + kx' =0[/tex]
Where
'= signify order of differentiation
A 5 kg box drops a distance of 10 m to the ground. If 70% of the initial potential energy goes into increasing the internal energy of the box, determine the magnitude of the increase.
Answer:
Explanation:
From the given information:
The initial PE [tex](PE)_i[/tex] = m×g×h
= 5 kg × 9.81 m/s² × 10 m
= 490.5 J
The change in Potential energy P.E of the box is:
ΔP.E = [tex]P.E_f -P.E_i[/tex]
ΔP.E = 0 - [tex](PE)_i[/tex]
ΔP.E = [tex]-P.E_i[/tex]
If we take a look at conservation of total energy for determining the change in the internal energy of the box;
[tex]\Delta P.E + \Delta K.E + \Delta U = 0[/tex]
[tex]\Delta U = -\Delta P.E - \Delta K.E[/tex]
this can be re-written as:
[tex]\Delta U =- (-\Delta P.E_i) - \Delta K.E[/tex]
Here, K.E = 0
Also, 70% goes into raising the internal energy for the box;
Thus,
[tex]\Delta U =(70\%) \Delta P.E_i-0[/tex]
[tex]\Delta U =(0.70) (490.5)[/tex]
ΔU = 343.35 J
Thus, the magnitude of the increase is = 343.35 J
What recommendations would you give to the global government to help Decrease the global effects of human impact on the environment mystery recommendations and how they will positively impact our planet
Answer:
We can help to keep it magnificent for ourselves, our children and grandchildren, and other living things besides us.
Explanation:
5 ways our governments can confront climate change
PROTECT AND RESTORE KEY ECOSYSTEMS
SUPPORT SMALL AGRICULTURAL PRODUCERS
PROMOTE GREEN ENERGY
COMBAT SHORT-LIVED CLIMATE POLLUTANTS
BET ON ADAPTATION, NOT JUST MITIGATION
jonatha want to put ketchup on his hamburger.he truns the ketchup bottle at an angle toward his plate and smacks the bottom of the bottle until the ketchup comes.what is unblanced force
Answer:
The force is Inertia
Explanation:
This is an example: He turns the ketchup bottle at an angle toward his plate and smacks the bottom of the bottle until the ketchup comes out. How does inertia affect the ketchup in the bottle? The Inertia keeps the ketchup in the bottle. The Jacksons are driving to the lake when a car in front of theirs slams on its brakes.
Your welcome! :)
If a magnifying glass has a power of 10.0 D, what is the magnification it produces when held 6.55 cm from an object?
Answer: The magnification of the magnifying glass is -2.9
Explanation:
The equation for power is given as:
[tex]P=\frac{1}{f}[/tex]
where,
P = Power = 10 D
f = focal length
Putting values in above equation, we get:
[tex]f=\frac{1}{10}=0.1m=10 cm[/tex] (Conversion factor: 1 m = 100 cm)
The equation for lens formula follows:
[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}[/tex]
where,
v = image distance
u = Object distance = 6.55 cm
Putting values in above equation, we get:
[tex]\frac{1}{v}=\frac{1}{10}-\frac{1}{(6.55)}\\\\\frac{1}{v}=\frac{6.55-10}{10\times 6.55}\\\\v=\frac{65.5}{-3.45}=-18.98cm[/tex]
Magnification (m) can be written as:
[tex]m=\frac{-v}{u}[/tex]
Putting values in above equation, we get:
[tex]m=\frac{-18.98}{6.55}\\\\m=-2.9[/tex]
Hence, the magnification of the magnifying glass is -2.9
A rotating fan completes 1150 revolutions every minute. Consider the tip of a blade, at a radius of 20.0 cm. (a) Through what distance does the tip move in one revolution
Answer:
125.6 cm
Explanation:
Applying,
S = 2πr................... Equation 1
Where S = distance moved by the tip in one revolution, r = radius of the rotating fan, π = pie
From the question,
Given: r = 20 cm,
Constant: π = 3.14
Substitute these values into equation 1
S = 2(3.14)(20)
S = 125.6 cm
Hence the distance moved by the tip in one revolution is 125.6 cm
how many protons does a neutral atom of oxygen-16 have
Answer:
eight
Explanation:
it's atomic number is 8 which mean that an oxygen atom has eight protons in it's nucleus
A 50mf capacitor, a 0.3H inductor and an 80 ohm resistor is connected in series with a 120v, 60Hz power source
What is the impedance of a circuit?
Answer:
Z = 138.5 Ω
Explanation:
In a series RLC circuit the impedance is
Z = [tex]\sqrt{R^2 + ( X_L - X_C)^2 }[/tex]
the capacitive impedance is
X_C = 1 / wC
the inductive impedance is
X_L = wL
in this exercise indicate that C = 50 10⁻³ F, L = 0.3 H and the frequency is f=60 Hz
angular velocity and frequency are related
w = 2π f
w = 2π 60
w = 376.99 rad / s
let's calculate
Z = [tex]\sqrt{80^2 + ( 376.99 \ 0.3 - \frac{1}{376.99 \ 50 \ 10^{-3}} )^2 }[/tex]
Z = [tex]\sqrt{6400 + ( 113.1 - 0.053)^2}[/tex]
Z = √19179.6
Z = 138.5 Ω
Unpolarized light of intensity 0.0288 W/m2 is incident on a single polarizing sheet. What is the rms value of the electric field component transmitted
Answer:
the rms value of the electric field component transmitted is 3.295 V/m
Explanation:
Given;
intensity of the unpolarized light, I = 0.0288 W/m²
For unpolarized light, the relationship between the amplitude electric field and intensity is given as;
[tex]E_{max} = \sqrt{2\mu_0cI} \\\\E_{max} = \sqrt{2(4\pi \times 10^{-7})(3\times 10^8)(0.0288)} \\\\E_{max} = 4.66 \ V/m[/tex]
The relationship between the rms value of the electric field and the amplitude electric field is given as;
[tex]E_{rms} = \frac{E_0}{\sqrt{2} } =\frac{E_{max}}{\sqrt{2} } \\\\E_{rms} = \frac{4.66}{\sqrt{2} }\\\\E_{rms} = 3.295 \ V/m[/tex]
Therefore, the rms value of the electric field component transmitted is 3.295 V/m
PLS HELP ME 100 POINTS PLS I NEED HELP QUICK PLS
For this project, you are expected to submit the following:
1. Your Student Guide with completed Student Worksheet
2. Your scale model of the solar system
Step 1: Prepare for the project.
a) Read through the guide before you begin so you know the expectations for this project.
b) If anything is not clear to you, be sure to ask your teacher.
Step 2: Conduct research on the actual sizes of the planets.
a) Do research to find the actual sizes of the Sun and the planets. This information is typically represented as diameter in kilometers (km). Recall that diameter is the length of the imaginary straight line from one side of a figure, such as a sphere, to the opposite side of the figure. This line passes through the center of the figure.
b) Record the actual diameters of the Sun and the planets in the first column of the table in the Student Worksheet.
c) Copy the link of the website you used into the space provided in the Student Worksheet.
Step 3: Determine the scaled sizes of the planets.
a) Go to a reliable website to find a solar system model calculator.
b) Decide how big you want the Sun in your model to be. For example, you could assign your Sun to be 300 mm. Input this figure in the calculator, and the calculator will determine the diameters of the eight planets for you. You want to make sure that the Sun is big enough so that the smallest planet will still be big enough to draw.
c) Record information from the calculator in the second column of the table in the Student Worksheet.
d) Copy the link of the website you used into the space provided in the Student Worksheet.
Step 4: Create a scale model of the solar system.
a) Draw and cut construction paper models of the Sun and the planets using the scaled measurements from the table.
b) Glue the models on the poster board. You can glue or tape poster boards together if necessary. Be sure to put the Sun in the center and to put the planets and a drawing of their orbits in order from nearest to farthest from the Sun.
Note: Remember that in this model, the diameter of the planets is scaled but the distance of the planets from the Sun is not. That means your model does not accurately represent the distances of the planets from the Sun so you need not worry about these measurements.
c) Label the Sun and the planets.
d) Put an attention-catching title above or below your model.
e) Write your name on the back of your poster board.
Step 5: Complete the Student Worksheet.
a) Make sure the table in the Student Worksheet is complete.
b) Answer the questions in the Student Worksheet.
c) Check to make sure you added the sources you used for this project in the Student Worksheet.
Step 6: Evaluate your project using this checklist.
If you can check each of the following boxes, you are ready to submit your project.
Did you conduct research to find the actual size of the Sun and the planets? Did you record this information in the table in the Student Worksheet?
Did you use a solar system model calculator to determine the scaled size of the Sun and planets? Did you record this information in the Student Worksheet?
Did you add the links of the websites you used for this project to the Student Worksheet?
Did you use the scaled sizes to create models of the Sun and the planets?
Did you put your model together in a way that represents the solar system (Sun in the center and planets in order from nearest to farthest from the Sun)?
Did you label each component of your model?
Did you add an attention-catching title above or below your model?
Did you write your name on the back of your poster board?
Did you complete the Student Worksheet at the end of this guide?
Step 7: Revise and submit your project.
a) If you were unable to check off all the requirements on the checklist, go back and make sure that your project is complete. Save your project before submitting it.
b) Turn in your scale model of the solar system to your teacher. Be sure that your name is on it.
c) Submit your Student Guide through the virtual classroom.
d) Congratulations! You have completed your project.
Answer
I hope this help....
Explanation:
Answer:
Hope this helps
Explanation:
Which statement accurately represents the arrangement of electrons in Bohr’s atomic model?
Electrons move randomly in the relatively large space surrounding the nucleus.
Electrons move around the nucleus in fixed orbits of equal levels of energy.
Electrons move around the nucleus in fixed orbits of increasing levels of energy.
Electrons vibrate in fixed locations around the nucleus.
Answer: Electrons move around the nucleus in fixed orbits of equal levels of energy
Explanation:
The statement that accurately represents the arrangement of electrons in Bohr’s atomic model is that the electrons move around the nucleus in fixed orbits of equal levels of energy.
It should be noted that the electrons have a fixed energy level when they travel around the nucleus in with energies which varies for different levels.
Higher energy levels are depicted by the orbits that are far from the nucleus. There's emission of light when the electrons then return back to a lower energy level.
a 230 kg roller coaster reaches the top of the steepest hill with a speed of 6.2 km/h. It then descends the hill, which is at an angle of 45 and is 51.0 m long/ What will its kinetic energy be wehn it reaches the bottom
Answer: 81.619 kJ
Explanation:
Given
Mass of roller coaster is [tex]m=230\ kg[/tex]
It reaches the steepest hill with speed of [tex]u=6.2\ km/h\ or \ 1.72\ m/s[/tex]
Hill to bottom is 51 m long with inclination of [tex]45^{\circ}[/tex]
Height of the hill is [tex]h=51\sin 45^{\circ}=36.06\ m[/tex]
Conserving energy to get kinetic energy at bottom
Energy at top=Energy at bottom
[tex]\Rightarrow K_t+U_t=K_b+U_b\\\Rightarrow \dfrac{1}{2}mu^2+mgh=K_b+0\\\\\Rightarrow K_b=0.5\times 230\times 1.72^2+230\times 9.8\times 36.06\\\Rightarrow K_b=340.216+81,279.24\\\Rightarrow K_b=81,619.456\ J\\\Rightarrow K_b=81.619\ kJ[/tex]
Three ice skaters, numbered 1, 2, and 3, stand in a line, each with her hands on the shoulders of the skater in front. Skater 3, at the rear, pushes forward on skater 2. Assume the ice is frictionless.
Identify all the action/reaction pairs of forces between the three skaters. Draw a free-body diagram for skater 2, in the middle.
Answer:
Following are the responses to the given question:
Explanation:
The mass (mg) is downwards, the typical [tex]N_2[/tex] pressure is upward. This pushing force of [tex]\vec{F}_{3 \to 2}[/tex] is pushed forward by skater 3 on skater 2. (considered as rightward direction). The strength of the slater 2 in reply is the slater [tex]\vec{F}_{2\to 3}[/tex] Skater three moves to the left.
Its push force [tex]\vec{F}_{2\to1}[/tex] imparted to the skateboarder 2 in relation those above forces The force[tex]\vec{F}_ {1\to 2}[/tex] on skater 2 by skater 1 is as a response, to a left. Skater 2's free body system is as follows:
The engine of a locomotive exerts a constant force of 6.8 105 N to accelerate a train to 80 km/h. Determine the time (in min) taken for the train of mass 1.1 107 kg to reach this speed from rest.
Answer:
t = 6 minutes
Explanation:
Given that,
Force,[tex]F=6.8\times 10^5\ N[/tex]
Initial speed of the train, u = 0
Final speed of the train, v = 80 km/h = 22.22 m/s
The mass of the train, [tex]m=1.1\times 10^7\ kg[/tex]
We need to find the time taken by the train to come to rest. We know that,
F = ma
[tex]F=\dfrac{m(v-u)}{t}\\\\t=\dfrac{m(v-u)}{F}\\\\t=\dfrac{1.1\times10^7\times (22.22-0)}{6.8\times 10^5}\\\\t=359.44\ s[/tex]
or
t = 6 minutes (approx)
So, the required time is equal to 6 minutes.
Multiple-Concept Example 9 reviews the concepts that are important in this problem. A drag racer, starting from rest, speeds up for 391 m with an acceleration of +18.9 m/s2. A parachute then opens, slowing the car down with an acceleration of -9.92 m/s2. How fast is the racer moving 332 m after the parachute opens?
Answer:
V = 90.51 m/s
Explanation:
From the given information:
Initial speed (u) = 0
Distance (S) = 391 m
Acceleration (a) = 18.9 m/s²
Using the relation for the equation of motion:
v² - u² = 2as
v² - 0² = 2as
v² = 2as
[tex]v = \sqrt{2as}[/tex]
[tex]v = \sqrt{2*18.9*391}[/tex]
v = 121.57 m/s
After the parachute opens:
The initial velocity = 121.57 m/ss
Distance S' = 332 m
Acceleration = -9.92 m/s²
How fast is the racer can be determined by using the relation:
[tex]V= \sqrt{v^2 + 2aS'}[/tex]
[tex]V = \sqrt{121.57^2+ 2 (-9.92)(332)}[/tex]
V = 90.51 m/s
A car starts from rest and accelerates uniformly in a straight line in the positive x direction. After 25 seconds, its speed is 90 km/h.
a) Determine the acceleration of the object. [5]
b) How far does the object travel during the first 25 seconds? [3]
c) What is the average velocity of the object during the first 25 seconds?
Answer:
A. 1 m/s²
B. 312.5 m
C. 12.5 m/s
Explanation:
We'll begin by converting the velocity i.e 90 Km/h to m/s. This can be obtained as follow:
Velocity (Km/h) = 90 Km/h
Velocity (m/s) =?
Velocity (m/s) = Velocity (Km/h) × 1000 / 3600
Velocity (m/s) = 90 × 1000 / 3600
Velocity (m/s) = 90000 / 3600
Velocity (m/s) = 25 m/s
A. Determination of the acceleration.
Initial velocity (u) = 0 m/s
Final velocity (v) = 25 m/s
Time (t) = 25 s
Acceleration (a) =?
v = u + at
25 = 0 + (a × 25)
25 = 0 + 25a
25 = 25a
Divide both side by 25
a = 25/25
a = 1 m/s²
B. Determination of the distance travelled.
Initial velocity (u) = 0 m/s
Final velocity (v) = 25 m/s
Acceleration (a) = 1 m/s²
Distance travelled (s) =?
v² = u² + 2as
25² = 0 + (2 × 1 × s)
625 = 0 + 2s
625 = 2s
Divide both side by 2
s = 625 / 2
s = 312.5 m
C. Determination of the average velocity.
Total distance travelled = 312.5 m
Total time = 25 s
Average velocity =?
Average velocity = Total distance / total time
Average velocity = 312.5 / 25
Average velocity = 12.5 m/s
A train is moving with a speed of 100 m/s. If the train is traveling south, at what position will it be 3 minutes after passing the +1,000-meter position marker ?
Remember, south is the negative direction and when you use the time, it must be in units of seconds. You will be applying one of the equations from above to solve this problem. And you must include a + sign if the final position is positive or a - sign if the final position is negative.
Answer:
The position after 3 minutes is - 800 m.
Explanation:
speed, v = 100 m/s
time, t = 3min = 180 s
initial position, x = 1000 m
let the distance traveled in 3 minutes is d
d = 100 x 180 = - 18000 m
So, the position is
= - 18000 + 1000 = - 800 m
In the winter activity of tubing, riders slide down snow covered slopes while sitting on large inflated rubber tubes. To get to the top of the slope, a rider and his tube, with a total mass of 70 kg, are pulled at a constant speed by a tow rope that maintains a constant tension of 350 N.
Required:
How much thermal energy is created in the slope and the tube during the ascent of a 30-m-high, 120-m-long slope?
Answer:
21420 J
Explanation:
Given that:
mass of the rider = 70 kg
the tension of the rope = 350 N
Using the concept of conservation of energy;
Work done = change in the Total energy ( ΔT.E)
where;
Work done (W) = ΔK.E + ΔP.E + ΔThermal Energy
Recall that the man proceeds with a constant speed, thus the change in K.E energy will be zero.
As such:
W = ΔP.E + ΔThermal Energy
We can now say that:
The thermal energy = W - ΔP.E
here;
W = force × displacement
The thermal energy = (350 × 120) - (70 × 9.8 × 30)
= 42000 - 20580
= 21420 J
The velocity of an object traveling in a circle is quadrupled and its radius is tripled The acceleration of this object will change by factor of?
Answer:
The process of solving a circular motion problem is much like any other problem in physics class. The process involves a careful reading of the problem, the identification of the known and required information in variable form, the selection of the relevant equation(s), substitution of known values into the equation, and finally algebraic manipulation of the equation to determine the answer. Consider the application of this process to the following two circular motion problems.
Sample Problem #1
A 900-kg car moving at 10 m/s takes a turn around a circle with a radius of 25.0 m. Determine the acceleration and the net force acting upon the car.
The solution of this problem begins with the identification of the known and requested information.
Known Information:
m = 900 kg
v = 10.0 m/s
R = 25.0 m
Requested Information:
a = ????
Fnet = ????
To determine the acceleration of the car, use the equation a = v2 / R. The solution is as follows:
a = v2 / R
a = (10.0 m/s)2 / (25.0 m)
a = (100 m2/s2) / (25.0 m)
a = 4 m/s2
To determine the net force acting upon the car, use the equation Fnet = m•a. The solution is as follows.
Fnet = m • a
Fnet = (900 kg) • (4 m/s2)
Fnet = 3600 N
Sample Problem #2
A 95-kg halfback makes a turn on the football field. The halfback sweeps out a path that is a portion of a circle with a radius of 12-meters. The halfback makes a quarter of a turn around the circle in 2.1 seconds. Determine the speed, acceleration and net force acting upon the halfback.
The solution of this problem begins with the identification of the known and requested information.
Known Information:
m = 95.0 kg
R = 12.0 m
Traveled 1/4-th of the circumference in 2.1 s
Requested Information:
v = ????
a = ????
Fnet = ????
To determine the speed of the halfback, use the equation v = d / t where the d is one-fourth of the circumference and the time is 2.1 s. The solution is as follows:
v = d / t
v = (0.25 • 2 • pi • R) / t
v = (0.25 • 2 • 3.14 • 12.0 m) / (2.1 s)
v = 8.97 m/s
To determine the acceleration of the halfback, use the equation a = v2 / R. The solution is as follows:
a = v2 / R
a = (8.97 m/s)2 / (12.0 m)
a = (80.5 m2/s2) / (12.0 m)
a = 6.71 m/s2
To determine the net force acting upon the halfback, use the equation Fnet = m•a. The solution is as follows.
Fnet = m*a
Fnet = (95.0 kg)*(6.71 m/s2)
Fnet = 637 N
In Lesson 2 of this unit, circular motion principles and the above mathematical equations will be combined to explain and analyze a variety of real-world motion scenarios including amusement park rides and circular-type motions in athletics.
which object has potential energy but not kinetic energy
Answer:
A ball resting on the edge of a cliff
Explanation:
An object must be in motion or be moving to have kinetic energy. Since the ball is resting on the edge of a cliff, it is not actually moving so it does not have kinetic energy but the resting place of the ball is potential energy.
Let’s use these equations to compare the electrostatic force and the gravitational force in a few different situations. In each case, calculate the strength of the electrostatic force and the strength of the gravitational force.
Two electrons separated by 1 cm
q = 1.6 x 10-19 C
m = 9.1 x 10-31 kg
d = 1 cm
What is the electric force?
What is the gravitational force?
Which force will dominate the motion of the electrons?
Answer:
Electric force is the attractive force between the electrons and the nucleus. It works the same way for a negative charge, you also have an electric field around it. ... Now, like charges repel each other and opposite charges attract.
The gravitational force is a force that attracts any two objects with mass. We call the gravitational force attractive because it always tries to pull masses together, it never pushes them apart. ... This is called Newton's Universal Law of Gravitation.
electric force
This table shows clearly that the electric force dominates the motion of electrons in atoms. However, on a macroscopic scale, the gravitational force dominates. Since most macroscopic objects are neutral, they have an equal number of protons and electrons.
Explanation:
Imagine two circular plates; one is solid and the other has a hole cut out of the center. Both plates have the same radius, same thickness, and same mass. The same force F is applied tangential to the edge of each plate in such a way that the plates rotate about an axis passing through the center and perpendicular to the surface of the plates.
Which one of the following statements is true regarding the angular acceleration?
1. Both plates will rotate with the same angular acceleration.
2. The solid plate will have the greater angular acceleration.
3. The plate with the hole will have the greater angular acceleration.
Which of the following statements helps to explain the question asked above? (Select all that apply.)
1. Because both plates have the same mass, they will have the same moment of inertia.
2. Angular acceleration is inversely proportional to the moment of inertia.
3. Angular acceleration is directly proportional to the moment of inertia.
4. The plate with the hole has its mass distributed further out from the axis of rotation, which will increase its moment of inertia.
5. Both plates will be subjected to the same torque.
Answer:
the correct statement is 2. The solid plate will have the greater angular acceleration.
the correct phrase is 4. The plate with the hole has its mass distributed further out from the axis of rotation, which will increase its moment of inertia.
Explanation:
Newton's second law expression for rotational motion is
τ = I α (1)
where the torque is
τ = F r
in this case, as the discs have the same radius and the applied force is the same, the torque is the same on the two discs.
The moment of inertia is given by the expression
I =∫ r² dm
for bodies with high symmetry are tabulated
the moment of inertia for in disk solid is I₁ = ½ m R₂²
the moment for a disk with a hole I₂ = ½ m (R₁² + R₂²)
We can see that the moment of inertia of the disk with the hole is greater than the moment of inertia of the solid disk.
Let's use equation 1
α = τ/I
therefore the angular acceleration is lower for the body with the higher moment of inertia, consequently the solid disk has higher angular acceleration
the correct statement is 2
The reason is because the moment of inertia is higher for the hollow disk.
the correct phrase is 4
The diagram shows the molecular structure of ethane. What is the chemical
formula for ethane?
Ethane
H H
H-C-C-H
| |
H H
A spinning satellite begins to unfold two solar panels as shown. As the
panels extend from the satellite, what is the result?
Its angular momentum of a satellite will drop even as satellite panel stretch because of the reduction in angular velocity brought on by the drag effect.
Why then do stars spin more quickly during their demise?A portion of the star's mass is blown off during the supernovae that come before the creation of black holes, taking some of the star's total angular momentum with it.The leftover material sinks into the star's core while continuing to spin rapidly.
What is the name of the spinning effect?Magnus effect: When there is relative movement between both the spinning item and the fluid, a sideways force is generated on a rotating cylindrical or spherical object immersed in the fluid (liquid or gas).In honor of the German chemist and physicist H.G.
To know more about angular velocity visit:
https://brainly.com/question/29557272
#SPJ1
Now imagine that a beam of moving electrons enters the quadrupole, with velocity parallel to the charged rods. When the beam enters the device, its cross-sectional profile is circular. What will the beam look like when it exits the quadrupole on the other side
Answer:
The beam of electrons would be flattened into a oval that is long in the x-axis and short in the y-axis.
Explanation:
A beam of moving electrons enters the quadrupole, with velocity parallel to the charged rods. When the beam enters the device, its cross-sectional profile is circular. On the other side, the beam of electrons would be flattened into a oval that is long in the x-axis and short in the y-axis.
The directions is shown in figure.
two particles woth each charge magnitude 2.0×10^-7 c but opposite signs are held 15cm apart.what are the magnitude and direction of the electric field E at tge point midway between charges
Answer:
The magnitude of the electric field strength is 6.4 x 10⁵ N/C, directed from positive particle to negative particle.
Explanation:
Given;
charge of each particle, Q = 2 x 10⁻⁷ C
distance between the two charges, r = 15 cm = 0.15 m
distance midway between the charges = 0.075 m
The magnitude of the electric field is calculated as;
[tex]E_{net} = E_{+q} + E_{-q}\\\\E_{net} = \frac{kQ}{r_{1/2}^2} + \frac{kQ}{r_{1/2}^2}\\\\E_{net} = 2(\frac{kQ}{r_{1/2}^2})\\\\E_{net} = 2 (\frac{9\times 10^9 \ \times 2\times 10^{-7}}{0.075^2} )\\\\E_{net} = 6.4\times 10^5 \ N/C[/tex]
The direction of the electric field is from positive particle to negative particle.