Which of the following is a period 4 representative element?
A. C
B. An
C. Ti
D. K

Answer: 1. Highest osmotic pressure : 1 M [tex]MgCl_2[/tex]

2. Lowest osmotic pressure:  1 M [tex]C_{12}H_{22}O_{11}[/tex]

Explanation:

[tex]\pi=i\times C\times R\times T[/tex]

[tex]\pi[/tex]= osmotic pressure

i = Van'T Hoff factor  

C = concentration  

T = Temperature  

1. For 1M [tex]MgCl_2[/tex]  

, i= 3 as it is a electrolyte and dissociate to give 3 ions.

[tex]MgCl_2\rightarrow Mg^{2+}+2Cl^{-}[/tex]  

2. For 1 M [tex]KCl[/tex]

, i= 2 as it is a electrolyte and dissociate to give 2 ions.

[tex]KCl\rightarrow K^{+}+Cl^{-}[/tex]

3. For  1M [tex]C_{12}H_{22}O_{11}[/tex]

, i= 1 as it is a non electrolyte and do not dissociate.  

Thus as vant hoff factor is highest for [tex]MgCl_2[/tex] thus osmotic pressure is highest for 1 M [tex]MgCl_2[/tex]

And as vant hoff factor is lowest for [tex]C_{12}H_{22}O_{11}[/tex] thus osmotic pressure is lowest for  1 M [tex]C_{12}H_{22}O_{11}[/tex]

Answer:

A mole ratio is ​the ratio between the amounts in moles of any two compounds involved in a chemical reaction.

Mole ratios are used as conversion factors between products and reactants in many chemistry problems.

Explanation:

Answer:

Explanation:

Do a quick conversion: 1 grams H3PO4 = 0.010204583427424 mole using the molecular. How many grams H3PO4 in 1 mol?  You can view more details on each measurement unit: molecular weight of H3PO4 or mol This. The formula weight is simply the weight in atomic mass units of all the atoms in a given formula.

Answer:

Explanation: Sodium Nitroprusside, whose molecular formula is  • 2H2O, and whose molecular weight is 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water.

<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3

Answer:

Water (chemical formula: H2O) is a transparent fluid which forms the world's streams, lakes, oceans and rain, and is the major constituent of the fluids of organisms. As a chemical compound, a water molecule contains one oxygen and two hydrogen atoms that are connected by covalent bonds.

<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3

Answer:

[tex][N_2]=0.0866M[/tex]

Explanation:

Hello there!

In this case, in agreement to the chemical reaction, it is possible for us to figure out the equilibrium concentration of the N2 product, via an ICE table plugged in the equilibrium expression:

[tex]Kc=\frac{[N_2][O_2]}{[NO]^2}\\\\2.4x10^3=\frac{x*x}{(0.175-2x)^2}[/tex]

In such a way, when solving for x via quadratic equation or just a solver, it is possible to obtain:

[tex]x_1=0.0866M\\\\x_2=0.0884M[/tex]

In such a way, since the root 0.0884 M produce a negative concentration of NO (0.175-2*0.0884=-0.0018M), we infer that the correct root is 0.0866 M; therefore, the concentration of N2 at equilibrium is equal to x:

[tex][N_2]=x=0.0866M[/tex]

Best regards!

Answer:

[tex]B_3H_6N_3[/tex]

Explanation:

Hello there!

In this case, since the mass percentages in a compound which is wanted to know the molecular formula, can be assumed to be the masses, we first need to compute the moles they have in the formula unit:

[tex]n_B=40.29gB*\frac{1molB}{10.811gB} =3.73molB\\\\n_H=7.51gH*\frac{1molH}{1.01gH} =7.44molH\\\\n_N=52.20gN*\frac{1molN}{14.01gN} =3.73molN[/tex]

Next, we divide each moles by the fewest ones (3.73 mol) in order to find the subscript in the empirical formula first:

[tex]B:\frac{3.73}{3.73}=1 \\\\H:\frac{7.44}{3.73}=2\\\\N:\frac{3.73}{3.73}=1[/tex]

Then, the empirical formula is BH2N whose molar mass is 26.83 g/mol, so the ratio of molecular to empirical is 80.50/26.83=3; therefore, the molecular formula is three times the empirical one:

[tex]B_3H_6N_3[/tex]

Best regards!

Answer:

323 kJ/g

Explanation:

ck-12 said it was correct

Answer:

The Lewis structure for the sulfate ion consists of a central sulfur atom with four single bonds to oxygen atoms. This yields the expected total of 32 electrons. Since the sulfur atom started with six valence electrons, two of the S-O bonds are coordinate covalent.

Explanation:

Then that means it has both.

Answer:

Prism B

Explanation:

Answer:

I didn't do anything, we don't celebrate lol I hope you had fun though!

Explanation:

Answer:

474 nm or 4.74 x 10^2 nm

Explanation:

c = λv

c (speed of light) = 2.998 x 10^8 m/s

λ = ?

v = 6.32 × 1014 Hz = 6.32 × 1014 1/s

2.998 x 10^8 m/s = (λ)(6.32 × 10^14 1/s)

λ = (2.998 x 10^8 m/s) / (6.32 × 10^14 1/s)

λ = 4.74 x 10^-7 m

λ = 4.74 x 10^-7 m x (1 x 10^9 nm/1 m) = 474 nm

Answer: 24g

Explanation:

Answer:

full moon

Explanation:

....ur welcome..............

Answer:

full moon

Explanation:

Answer:

2.41x10²¹ atoms

Explanation:

First we calculate the mass of nickel in the coin, using the given mass and percent composition:

Then we convert 0.2355 grams of nickel to moles, using its molar mass:

Finally we convert moles into number of atoms, using Avogadro's number:

The complete reaction for potassium hydroxide (KOH) and phosphoric acid (H3PO4) would yield products of water (H2O) and potassium phosphate (K3PO4).

3 KOH + H3PO4 ---> K3PO4 + 3 H2O

The net ionic equation would be obtained when you express the compounds in their ionic forms and eliminating the spectator ions. Spectator ions are the ions that appear in the reactant and product side. They do not actively participate the in the reaction.

3 K+ + 3 OH- + H3PO4  --->  3K+ + PO4^3- + 3 H2O

H3PO4 is a weak acid so it does not dissociate. H2O is not an ionic compound so it also does not dissociate. Therefore, the spectator ion is the potassium ion K+. The net ionic reaction is

3 OH- + 3 H3PO4  ---> PO4^3- + 3 H2O

Answer:

ΔHreaction (KJ) =  - 78 KJ

The value may vary in relation to the source of the bond enthalpy data.

 Bond enthalpies used  (From a table of bond enthalpies )

Bond           KJ/ mol

C≡O           1080

C-Cl            330

C=O           741

Cl-Cl           243

Explanation:

                         CO(g) + Cl2(g)  →    COCl2(g)

1) Lewis structures

Valence electrons

C     4

O     6

Cl     7

Reactants

CO(g)

In the case of CO, carbon has a negative charge and oxygen a positive charge.

Cl2(g)

Products

COCl2(g)

_______________________

ΔHreaction (KJ) = ∑ n* ΔH ( reactants) - ∑ n* ΔH (product)

ΔHreaction (KJ) =   (ΔHC≡O +   ΔHCl-Cl)  - ( ΔHC=O  + 2* ΔHC-Cl)

Replacing the values

ΔHreaction (KJ) =   (1080 +  243)  - ( 741 + 2* 330)

ΔHreaction (KJ) = 1323 -  1401

                          =  - 78 KJ

Answer:

14.25g

Explination:

I found this answer on quizlet titled, "Chem Quizlet" by jamie_barbara

Answer:

A. 2 : 13

B. 10 : 13

C. 10 moles of water, H₂O.

D. 2 moles of butane, C₄H₁₀

E. 116 g of butane, C₄H₁₀

F. 13 moles of oxygen, O₂

G. 416 g of oxygen, O₂

Explanation:

The equation for the reaction is given below:

2C₄H₁₀ + 13O₂ —> 8CO₂ + 10H₂O

A. Determination of the mole ratio between butane and oxygen gas.

Mole of butane, C₄H₁₀ = 2 moles

Mole of oxygen, O₂ = 13 moles

Mole ratio of butane and oxygen = 2 : 13

B. Determination of the mole ratio between water and oxygen gas

Mole of the water, H₂O = 10 moles

Mole of oxygen, O₂ = 13 moles

Mole ratio of water and oxygen = 10 : 13

C. Determination of the moles of water formed.

From the balanced equation above,

10 moles water, H₂O were produced.

D. Determination of the moles of butane burned.

From the balanced equation above,

2 moles of butane, C₄H₁₀ were burned.

E. Determination of the mass of butane burned.

Molar mass of C₄H₁₀ = (12×4) + (10×1)

= 48 + 10 = 58 g/mol

Mole of C₄H₁₀ = 2 moles

Mass of C₄H₁₀ =?

Mass = mole × molar mass

Mass of C₄H₁₀ = 2 × 58

Mass of C₄H₁₀ = 116 g

Thus, 116 g of butane, C₄H₁₀ were burned.

F. Determination of the number of mole of oxygen used.

From the balanced equation above,

13 moles of oxygen, O₂ were used.

G. Determination of the mass of oxygen used.

Molar mass of O₂ = 2 × 16 = 32 g/mol

Mole of O₂ = 13 moles

Mass of O₂ =?

Mass = mole × molar mass

Mass of O₂ = 13 × 32

Mass of O₂ = 416 g

Thus, 416 g of oxygen, O₂ were used.

Answer:

C: Plants mostly need air, water and sunlight to grow

Explanation:

Answer:

Variations of inherited traits between parent and offspring arise from genetic differences that result from the subset of chromosomes (and therefore genes) inherited.

Explanation:

The sun contained 99% of the available matter and the rest matter formed smaller clumps inside the spinning disk. These clumps gained enough mass which lead to their gravity shaping them into spheres becoming planets.

A planet can be described as a large, rounded astronomical body that is neither a star nor its remnant. The theory of planet formation is the nebular hypothesis, which tells that an interstellar cloud collapses out of a nebula to generate a young protostar orbited by a protoplanetary disk.

The planet grows in this disk by the accumulation of material driven by gravity and this process is known as accretion. Our solar system has at least eight planets that rotate around an axis tilted with respect to its orbital pole.

All planets possess an atmosphere, although that of Mercury is tenuous.  The Solar System planets create magnetic fields apart from Venus and Mars, and all planets except Venus and Mercury have natural satellites.

Learn more about planets, here:

https://brainly.com/question/15268075

#SPJ2

i. The dissolution of PbSO₄ in water entails its ionizing into its constituent ions:

[tex]\mathrm{PbSO_{4}}(aq) \rightleftharpoons \mathrm{Pb^{2+}}(aq)+\mathrm{SO_4^{2-}}(aq).[/tex]

---

ii. Given the dissolution of some substance

[tex]xA{(s)} \rightleftharpoons yB{(aq)} + zC{(aq)}[/tex],

the Ksp, or the solubility product constant, of the preceding equation takes the general form

[tex]K_{sp} = [B]^y [C]^z[/tex].

The concentrations of pure solids (like substance A) and liquids are excluded from the equilibrium expression.

So, given our dissociation equation in question i., our Ksp expression would be written as:

[tex]K_{sp} = \mathrm{[Pb^{2+}] [SO_4^{2-}]}[/tex].

---

iii. Presumably, what we're being asked for here is the molar solubility of PbSO4 (at the standard 25 °C, as Ksp is temperature dependent). We have all the information needed to calculate the molar solubility. Since the Ksp tells us the ratio of equilibrium concentrations of PbSO4 in solution, we can consider either [Pb2+] or [SO4^2-] as equivalent to our molar solubility (since the concentration of either ion is the extent to which solid PbSO4 will dissociate or dissolve in water).

We know that Ksp = [Pb2+][SO4^2-], and we are given the value of the Ksp of for PbSO4 as 1.3 × 10⁻⁸. Since the molar ratio between the two ions are the same, we can use an equivalent variable to represent both:

[tex]1.3 \times 10^{-8} = s \times s = s^2 \\s = \sqrt{1.3 \times 10^{-8}} = 1.14 \times 10^{-4} \text{ mol/L}.[/tex]

So, the molar solubility of PbSO4 is 1.1 × 10⁻⁴ mol/L. The answer is given to two significant figures since the Ksp is given to two significant figures.

Answer:

see below

Explanation:

1)  chem rxn    compound   molecule   covalent   ions    ionic

2) 2 hydrogen  one oxygen       H2O    covalent

3) is always liq

Answer: d

Explanation: took the test got it right