Answer:
Explanation:
july
At 298.15 K, the Nernst equation can be rewritten to show that the nonstandard cell potential is equal to the standard cell potential minus:
(0.0257 Vn)lnQ
(0.0257 Vn)logQ
(0.0592 Vn)lnQ
none of the above
At 298.15 K, the Nernst equation can be written to show that the nonstandard cell potential is equal to the standard cell potential minus (0.0592 Vn) logQ.
This equation is essential in determining the thermodynamic properties of an electrochemical cell and the cell potential of a nonstandard cell. The Nernst equation is a fundamental equation used to calculate the cell potential of an electrochemical cell at a given temperature. At 298.15 K (25°C), the Nernst equation can be written as:
E = E0 - (0.0592 Vn) logQ
Where E0 is the standard cell potential, Vn is the number of moles of electrons transferred in the reaction, and Q is the reaction quotient. This equation states that the nonstandard cell potential (E) is equal to the standard cell potential (E0) minus (0.0592 Vn) logQ.
In addition, the Nernst equation can be used to calculate the cell potential of a nonstandard cell, which is the cell potential of a cell when the concentrations of reactants and products are not at standard conditions. By understanding the nonstandard cell potential, it is possible to determine how the cell potential is affected by changes in the concentrations of reactants and products.
Learn more about Nernst equation at : https://brainly.com/question/13043546
#SPJ4
which of the following solutions will produce a buffer? assume a total volume of volume of 1.0 liter.
A buffer is a solution that resists changes in pH when small amounts of acid or base are added. It is a mixture of a weak acid or base and its conjugate, which is a salt of that acid or base. All of the given are correct.
When small amounts of acid or base are added to the buffer, the conjugate reacts with the acid or base, thus preventing a significant change in pH.
The following solutions will produce a buffer with a total volume of 1.0 liter:
1. A mixture of 0.1 moles of acetic acid (CH3COOH) and 0.1 moles of sodium acetate (CH3COONa). This buffer will resist changes in pH between 4.75 and 5.75.
2. A mixture of 0.1 moles of phosphoric acid (H3PO4) and 0.1 moles of potassium phosphate (K2HPO4). This buffer will resist changes in pH between 2.12 and 7.19.
3. A mixture of 0.1 moles of ammonia (NH3) and 0.1 moles of ammonium chloride (NH4Cl). This buffer will resist changes in pH between 9.24 and 10.75.
4. A mixture of 0.1 moles of boric acid (H3BO3) and 0.1 moles of sodium borate (Na2B4O7). This buffer will resist changes in pH between 9.2 and 9.7.
By combining the correct weak acid and its conjugate, each of the four solutions described above will produce a buffer with a total volume of 1.0 liter that resists changes in pH between the specified pH ranges.
Learn more about buffer at :https://brainly.com/question/22821585
#SPJ4
1. A mixture of 0.1 moles of acetic acid (CH3COOH) and 0.1 moles of sodium acetate (CH3COONa).
2. A mixture of 0.1 moles of phosphoric acid (H3PO4) and 0.1 moles of potassium phosphate (K2HPO4).
3. A mixture of 0.1 moles of ammonia (NH3) and 0.1 moles of ammonium chloride (NH4Cl).
4. A mixture of 0.1 moles of boric acid (H3BO3) and 0.1 moles of sodium borate (Na2B4O7).
Give practical this question answer
TO PREPARE BARIUM SULPHATE BY THE PRECIPITATION REACTION BETWEEN BARIUM CHLORIDE AND SULPHURIC ACID
Barium chloride react with sulfuric acid to produce barium sulfate and hydrogen chloride.
What is a Chemical reaction?This is referred to as the process in which one or more substance known as the reactants, are converted to one or more different substances which is called the products.
The reaction between Barium chloride and sulfuric acid which are the reactants form two products known as barium sulfate and hydrogen chloride under standard conditions so as to achieve a high yield and the equation can be seen below which is therefore the way in which this type of precipitation occurs in the laboratory.
BaCl₂+H₂SO₄→BaSO₄+2HCl.
Read more about Chemical equation here https://brainly.com/question/11231920
#SPJ1
which of the following would have the lowest iodine number? sunflower oil corn oil peanut oil butter
Sunflower oil, corn oil, peanut oil, and butter all have different iodine numbers. Sunflower oil has the highest iodine number, followed by corn oil, peanut oil, and butter. Therefore, butter would have the lowest iodine number.
Butter is a saturated fat, meaning it is composed of molecules that are completely saturated with hydrogen. This saturation means that there are no double-bonded carbon atoms, and thus, no unsaturation. As a result, butter has a very low iodine number, typically around 10-15.
Sunflower oil, on the other hand, is a polyunsaturated fat. This means that it contains many double-bonded carbon atoms, which increases its iodine number. Sunflower oil typically has an iodine number of around 100-140.
Corn oil and peanut oil have iodine numbers that fall between sunflower oil and butter. Corn oil usually has an iodine number of about 80-110, while peanut oil has an iodine number of around 70-90.
Learn more about polyunsaturated fat at : https://brainly.com/question/13141983
#SPJ4
a second chemist repeated the three experiments and observed that the reaction rates were considerably greater than those measured by the first chemist, even though the concentrations of the reactants and the temperature in the laboratory were the same as they were for the first chemist. which of the following is the best pairing of a claim about a most likely cause for the greater rates measured by the second chemist and a valid justification for that claim?
The second scientist must have introduced a catalyst to the reaction, opening up a new avenue for the reactant particles to engage in chemical reaction with a lower activation energy than the uncatalyzed reaction in the first chemist's trials.
Which term best describes concentration?The amount of a material in a certain area is referred to as concentration. A another way to think about concentration is as the proportion of a solution's solute to its entire solution or solvent.
Which instances of a concentrated solution are there?In a concentrated solution, the solute is present in significant levels relative to the solvent. Orange juice, brine solution, and black tea are a few examples. A diluted solution is one that has a little amount of solute and a lot of solvent. Salted water is one illustration.
To know more about Concentration visit:
https://brainly.com/question/10725862
#SPJ4
It is thought that when molten copper is cooled and solidified it can take in some oxygen from the air. This may slightly decrease the conductivity of the copper.
Suggest why the conductivity might be decreased.
Answer:
When molten copper is cooled and solidified, it may take in some oxygen from the air. This process, known as oxidation, can lead to the formation of copper oxide (CuO) impurities in the copper. Copper oxide is an insulator, meaning that it does not conduct electricity as well as pure copper.
As a result, the presence of copper oxide impurities in the copper may slightly decrease the conductivity of the material. This is because the electrons in the copper atoms may have to travel through the insulating copper oxide impurities, which can slow down the flow of electricity and reduce the conductivity of the material.
The decrease in conductivity due to oxidation may be more pronounced in thin or highly purified copper wires, as these materials may have a higher surface area and may be more prone to oxidation. In contrast, thicker or less pure copper wires may have a lower surface area and may be less susceptible to oxidation, resulting in a lower impact on their conductivity.
Overall, the decrease in conductivity of molten copper due to oxidation is likely to be relatively small, but it can be an important factor to consider in applications where high conductivity is critical, such as in electrical wiring or electronic devices.
what is a new substance produced by a chemical reaction
Answer:
Chemical change
Explanation:
A chemical reaction is a process that leads to the chemical transformation of one set of chemical substances to another. Classically, chemical reactions encompass changes that only involve the positions of electrons in the forming and breaking of chemical bonds between atoms, with no change to the nuclei, and can often be described by a chemical equation. Nuclear chemistry is a sub-discipline of chemistry that involves the chemical reactions of unstable and radioactive elements where both electronic and nuclear changes can occur.
Answer:
Product
Explanation:
50.0 mL of a solution of hydrochloric acid (HCl) of unknown concentration reacts completely with 58.9 mL of 0.105 M sodium hydroxide (NaOH). What is the concentration of the hydrochloric acid?
The concentration of the hydrochloric acid solution is 0.124M.
How to calculate the concentration?The concentration of a solution can be calculated using the molarity equation as follows:
CaVa = CbVb
Where;
Ca = concentration of acidCb = concentration of baseVa = volume of acidVb = volume of baseAccording to this question, 50.0mL of a solution of hydrochloric acid (HCl) of unknown concentration reacts completely with 58.9 mL of 0.105 M sodium hydroxide (NaOH). The concentration of the hydrochloric acid can be calculated as follows:
50 × Ca = 58.9 × 0.105
50Ca = 6.185
Ca = 6.185/50
Ca = 0.124M
Therefore, 0.124M is the concentration of the hydrochloric acid solution.
Learn more about concentration at: https://brainly.com/question/29216777
#SPJ1
choose the best reagent(s) from the list provided for carrying out the following transformations. place the corresponding letter in the box over the reaction arrow. (
The reaction described is the transformation of an aldehyde into an acid. Tollens reagent may be applied to carry out this change. In actuality, Tollens reagent is di-ammine-silver(I) complex (Ag(NH3)+2)Ag(NH3)+2).
What does the tollen chemical test for?Aldehydes are tested for using Tollens' reagent, an alkali solution of ammoniacal silver nitrate. Silver ions emerge from solution as both a brown deposit of silver(I) oxide, Ag2O, in the presence pf hydroxide ions (s).
What is tollens with Fehling's reactant?Compared to Fehling's reagents, Tollen's reagent has a stronger oxidizing solution. Unlike Fehling's test, which only works for aliphatic aldehydes, it can oxidize both and aromatic aldehydes. Ketones are not found in either test's results. Both assays are frequently used to determine whether reducing sugars are present.
To know more about tollen reagent visit:
https://brainly.com/question/14356309
#SPJ4
classify the following types of reactions as either ? a. combustionb. combinationc. decompositiond. single replacement
Combination: Two or more compounds combine to form one compound.
Combustion: Oxygen combines with a compound to form carbon dioxide and water.
Decomposition: In which a complex molecule breaks down to make simpler ones.
Displacement reaction: One element occurs with another element in the compound.
What are the types of reactions?A combination reaction is a reaction in which two or more compounds combine to generate one compound.
A + B → AB
A decomposition reaction is the opposite of a combination reaction in which a complex molecule breaks down to make simpler ones.
AB → A + B
A combustion reaction is a reaction in which oxygen combines with a compound to prepare carbon dioxide and water. These reactions are exothermic, they release heat.
A (hydrocarbon) + O₂ → H₂O + CO₂
Displacement reaction is the reaction in which one element is displaced with another element in the compound.
A + BC → AC + B
Learn more about types of reactions, here:
https://brainly.com/question/14203092
#SPJ4
How many grams of nacl are required to make 250.0 ml of a 3.000 m solution?
Answer:
43.83 grams of NaCl are required to make 250 ml of a 3M solution.
Explanation:
As given in the question,
Molarity of solution= 3M
Volume of solution= 250ml
Weight of solute Nacl=?
The formula for molarity is,
Number of moles=0.75 moles
According to the formula,
As we know, the molecular mass of NaCl is 58.44
Hence,
Xenon, Xe, forms a series of compounds with fluorine. The simplest of these compounds is XeF2. Which of the following would correctly characterize this compound?
The geometry of the molecule is linear.
The oxidation number of Xe is +4.
The molecule is more stable than XeCl2.
The molecule is soluble in nonpolar solvents.
The molecule as a whole is polar.
Xenon, Xe, forms a series of compounds with fluorine. The simplest of these compounds is XeF2.- Option 1 The geometry of the molecule is linear.
Xenon (Xe) is a chemical element that is a heavy and incredibly rare gas in Periodic Group 18 (noble gases). It was the first noble gas discovered capable of forming true different chemicals. Xenon, which is more than 4.5 times heavier than air, is colourless, flavourless, and tasteless. A molecule is a group of two or more atoms held together by covalent bond; depending on context, the word may or may not include ions that meet this criterion.
To learn more about series of compounds here:
https://brainly.com/question/17152360
#SPJ4
carbon footprint is the total amount of greenhouse gasses produced to support operations, usually expressed in equivalent tons of carbon dioxide (co2).
The entire amount of greenhouse gases created to sustain human activities both directly and indirectly, typically represented in equivalent tons of carbon dioxide (CO2).
In what context would you use the word "gasses"?On top of that, the planet's surface emits dangerous gases. Carbon dioxide, methane, tropospheric ozone, and nitrous oxide concentrations in the atmosphere have now increased significantly compared to pre-industrial levels as a result of human activity.
What does "gas" mean in the singular?A material that expands to fill any container is referred to as a gas, and the plural form of this term is gase. Third-person present tense verbs can have many different meanings, like "gasses."
To know more about Gases visit:
https://brainly.com/question/1369730
#SPJ4
Which of the following properties is associated with the existence of glycine as a dipolar ion in aqueous solution?
A) High dipole moment
B) High molecular weight
C) Low dielectric constant
D) Low solubility in water
The property associated with the existence of glycine as a dipolar ion in aqueous solution is High dipole moment
What is dipole moment?Dipole moments occur when there is a separation of charge. Dipole moments can exist between two ions in an ionic bond or between atoms in a covalent link; they are caused by changes in electronegativity. The dipole moment grows in proportion to the difference in electronegativity.
According to the question,
Glycine exists as a "dipolar ion in aqueous solution." Polarity in neutral molecules is caused by an unequal distribution of electron density, which might result from the separation of opposite charges. This happens in zwitterions. Also, molecules that have strong electron-withdrawing or electron-donating substituents are highly polar and have high dipole moments.
The property associated with the existence of glycine as a dipolar ion in aqueous solution is High dipole moment.
To know more about dipole moment, check out:
https://brainly.com/question/11626115
#SPJ4
Which of the following is NOT a difference in the pathways by which fatty acids are degraded
and synthesized?
A. The location of the process
B. The presence or absence of a double bond
C. The molecule to which the chain being synthesized or degraded is attached
D. The number of carbons added or removed to elongate or shorten the existing fatty acid
chain
The presence or absence of a double bond is not a difference in the pathways by which fatty acids are degraded and synthesized. Therefore, option B is correct.
What is fatty acid ?A fatty acid is an aliphatic carboxylic acid having a saturated or unsaturated aliphatic chain. The majority of fatty acids that are found in nature contain an unbranched chain with an even number of carbon atoms, ranging from 4 to 28.
Triglycerides, cholesterol, and other critical fatty acids—what the medical community refers to as fats that the body cannot produce on its own—store energy, keep us warm, and safeguard our vital organs. They serve as messengers, facilitating the work that proteins do.
Thus, option B is correct.
To learn more about fatty acid, follow the link;
https://brainly.com/question/5710423
#SPJ4
What amount of energy is required to change
20.0 g of an unknown substance from -15.0 °C
to 7.0 °C? (More information on the picture!!)
The amount of energy that is required to change 20.0 g of an unknown substance from -15.0 °C to 7.0 °C is q = +49.65 kJ.
What is energy?Energy is the ability to do tasks. It can exist in various forms, including potential, kinetic, thermal, electrical, chemical, and nuclear.
At -15°c, it will be solid, to increase the amount of heat to raise
temp from -15°C to 40°C.
(20.0) (3.3J/g°c) x 15°C) = 330 J.
At -10°C, it is in which phase transformation takes place from sold to wound.
ΔHfue = 0.945 J/gx 20g = 18.93.
After that, it will be in want and it will be in liquid form 40°C.
To 7°C, then.
922 m Cgas 47
=(20g) (1455/g°c) (17)
493005.
Total Energy = q1 + ΔHfus + q2
47 = 7.0°C - 10°C) = 14°C -
2 330J18.95 + 49300J
q = 49648.9 3. 9
q = +49.65 KJ
Therefore, the amount of energy is q = +49.65 KJ.
To learn more about energy, refer to the link:
https://brainly.com/question/3805749
#SPJ1
write the equilibrium constant expression, kc, for the following reaction: if either the numerator or denominator is 1, please enter 1 pcl3 (g) cl2 (g) pcl5 (g)
If either the denominator or denominator is 1, the intermediate is given as Kc=[CH3OH]/[CO][H2]2, Kc[CO][H2]2.
What is an illustration of an equilibrium?A few instances of equilibrium include: a book that is open and resting on a table. a vehicle traveling at a set speed. a chemical process where the rates of the forward reaction and the reverse reaction are equal.
What does it mean for chemistry to be at equilibrium?Chemical equilibrium is the state during a reversible chemical process when there is no net change in the quantities of reactants and products. When a chemical reaction is reversible, the products react with the original reactants as soon as they are created.
To know more about Equilibrium visit:
https://brainly.com/question/28527601
#SPJ4
Any material listed in the cell notation that is not specifically oxidized or reduced is most likely: Select the correct answer below: an inert electrode an active electrode contained in the salt bridge none of the above
Any material listed in the cell notation that is not specifically oxidized or reduced is most likely an inert electrode.
When looking at the cell notation, any material that is not specifically indicated as either being oxidized or reduced is most likely an inert electrode. An inert electrode is a material that does not participate in the redox reactions taking place in the electrochemical cell. It is often used as a conductor to connect the anode and the cathode, but it does not take part in the reaction itself.
The other option, an active electrode, is a material that does participate in the redox reactions taking place in the electrochemical cell. This material can either be oxidized or reduced, depending on the circumstances. It is important to note that an active electrode is not always present in the cell notation.
Learn more about redox reactions at : https://brainly.com/question/13293425
#SPJ4
What would the seasons on Earth be like if Earth did not revolve around the Sun but stayed in one place in relation to the Sun?
Question 4 of 16
What is the product(s) in the reaction below?
2Na(s)+2H₂O(I) → 2NaOH(aq)+H₂(g)
A. 2Na(s)+2H₂O(I)
B. 2H₂(g)
C. 2NaOH(aq)+H₂(g)
D. 2HO₂(I)
The product(s) in the reaction are: NaOH and H₂ (Option C)
How do I determine which is the product?Chemical equations are representations of chemical reactions. All chemical equations has two sides:
Reactants ProductsThe reactants are located on the left side while the products are located on the right side as shown below:
Reactants —> Products
With the above information, we can obtain the products of the reaction given in the question above. This is shown below:
2Na(s ) + 2H₂O(I) → 2NaOH(aq) + H₂(g)
The products are NaOH and H₂
Thus, the correct answer to the question is: 2NaOH(aq) + H₂(g) (Option C)
Learn more about products of reaction:
https://brainly.com/question/28732496
https://brainly.com/question/13541755
#SPJ1
What is the mass in grams of aluminum iodide that would be required to yield an actual amount of 80.25 grams of aluminum?
The mass in grams of aluminum iodide that is required to yield an actual amount of 80.25 grams of aluminum is 1407.89 grams
How to find theoretical yield?Let x represent the number of grams of aluminum iodide required to yield 73.75 grams of aluminum.
The charge on each aluminum ion is +3 while the charge on each iodide ion is -1. The empirical formula for aluminum iodide would be AH₃.
The relative atomic mass of aluminum and iodine on a modern periodic table is:
Al =26.982.
I = 126.904.
Therefore number of moles, n = mass, m / molar mass, M
molar mass of AH₃, M = 410.694
n = ( x / 410.694)
The number of grams of aluminum would be
mass = number of moles * molar mass
mass = (26.982 / 410.694)x g
Hence, the actual yield of aluminum would be:
Actual yield = percentage yield * theoretical yield
where:
theoretical yield = (26.982/410.694)x g
Actual yield = (26.982/410.694)x * 86.8%
Actual yield = 0.057x g
Since the actual yield is 80.25 g
0.057x g = 80.25
x = 1407.89 grams
Learn more about theoretical yield at: https://brainly.com/question/25996347
#SPJ1
the frist step in the industrial recovery of copper from copper sulfide ore is roasting that is the conversion of cus to cu o by heating 2cus +3o2(g)____2cu(s)+2so2(g) Δ H = -114.6 kJ/mol
The heat evolved per gram of CuS roasted is -5.01 kJ/g.
What is the industrial recovery of copper?The reaction is exothermic, with a delta H of -114.6 kJ/mol. This means that the reaction releases 114.6 kJ of heat for every mole of CuS that is converted to CuO. The reaction is carried out in a roaster, which is a large, industrial-scale furnace that is specifically designed for this process.
To solve the above problem, we need to determine the heat evolved per mole of CuS roasted, and then convert that to heat per gram of CuS roasted.
The heat evolved per mole of CuS roasted can be calculated using the given equation and the given value for the enthalpy change:
AH = -805.6 kJ/mol
We can then convert the heat evolved per mole to heat evolved per gram by dividing by the molar mass of CuS:
Heat per gram = (-805.6 kJ/mol) / (160.6 g/mol) = -5.01 kJ/g
Therefore, After roasting, the copper oxide is then leached with a solution of sulfuric acid to extract the copper. The resulting solution is then filtered and the copper is recovered from the solution through a process called electrowinning.
Learn more about copper from
https://brainly.com/question/26449005
#SPJ1
See full question below
The first step in the industrial recovery of copper from the copper sulfide ore is roasting, that is, the conversion of CuS to CuO by heating: 2CuS(s) + 302(g) → 2CuO(s) + 2802(g) AH = -805.6 kJ/mol Calculate the heat evolved (in kJ) per gram of CuS roasted.
select the correct statement about the elements in the periodic table. Each
a) family begins with a single electron in a new outer energy level
b) period ends with the filling of an orbital in an outer energy level
c)family has atoms with equal number of filled energy levels
Answer:
c) family has atoms with equal number of filled energy levels
Which type of reaction will this equation be classified as?
The chemical reaction given in the equation is a double replacement reaction. In a double replacement reaction, two elements in two different compounds switch places to form two new compounds.
What is double replacement ?A double replacement reaction, also known as a double displacement reaction or a metathesis reaction, is a type of chemical reaction in which the ions or molecules of two compounds exchange places to form two new compounds. In a double replacement reaction, the elements in the reactants are rearranged to form new chemical compounds, with the positive ions switching places with the negative ions.For example, the reaction between hydrochloric acid and sodium hydroxide can be represented by the following equation: HCl + NaOH → NaCl + H2O.In this reaction, the hydrogen ions in the hydrochloric acid (H+) switch places with the sodium ions in the sodium hydroxide (Na+) to form sodium chloride (NaCl) and water (H2O). Double replacement reactions are commonly used in the laboratory to test the acid-base properties of chemicals and to identify the products of a chemical reaction.To learn more about double replacement refer :
https://brainly.com/question/23918356
#SPJ1
All of the following variables related to the collection of blood may falsely increase the potassium levels EXCEPT:
Drawing a purple-top EDTA tube prior to a red-top tube.
Mixing the blood collection tube aggressively.
Pouring some sample from a purple-top EDTA tube into a red-top tube to make up for low collection volume.
Using a 21 G needle with a 10 mL collection tube.
All variables related to the collection of blood may falsely increase the potassium levels except Using a 21 G needle with a 10 mL collection tube.
What is purple top EDTA tube and red top tube?Purple red top EDTA is an inner tube covered with spray-dried K2EDTA. EDTA functions as an anticoagulant, binding calcium ions and interfering with blood coagulation.
Red top tube- There is no anticoagulant or preservative in this product. Serum or clotted whole blood might be used. Depending on the test, serum must be removed from cells within 45 minutes to two hours.
What is 21G needle?The most common gauge of needles used for routine blood draws and venipuncture is 21g. The gauge is small enough that it does not cause any pain or discomfort when used. Most patients' veins are of sufficient size and stability to accommodate the 21g needle.
All variables related to the collection of blood may falsely increase the potassium levels except Using a 21 G needle with a 10 mL collection tube
To know more about EDTA tube, check out:
https://brainly.com/question/15224570
#SPJ4
a proton placed at a and released from rest. the magnitude of the work done by the electric field in moving the proton from a to b is 1.7*10^-16
The proton's work done equals the inverse of the change in electric potential energy.
W=qVqV=W=qEscos =e(8.50102 N/C)(2.50m)(1)=3.3401016 J
To move an object, it must be transformed into energy. . Work done is the quantity of energy transmitted by a force to move an object. A proton is an elementary particle found in every atom's nucleus. The particle has a positive electric charge that is equal to and opposite to the electron's. A single proton has a volume of only 1.673? 10-27 kilogramme if isolated, which is slightly smaller than the mass of the a neutron. The proton is one of the three major particles that comprise the atom. Protons are discovered in the atom's nucleus.
To learn more about proton here:
https://brainly.com/question/1252435
#SPJ4
12. Imagine that you are a particle of a perfume. Describe what happens to you when the bottle is opened and eventually someone smells you on the other side of the room. Your description should include, how you move, what other particles you might meet and where you go.
The process by which the molecules of the gas can be able to move is the process of diffusion.
What is diffusion?We know that according to the Graham's law, the rate of the diffusion of the gas is inversely proportional to the molar mass of the gas. When we open the bottles, the molecules of the perfume would begin to move.
As the bottle is opened, the molecules would escape from the bottle and then be able to travel through the room and get to where you are by the principle of diffusion.
Hence, the movement of the perfume is according to the Graham's law of diffusion in gases.
Learn more about diffusion:https://brainly.com/question/24746577
#SPJ1
name the 3 similar parts of every amino acid. a. b. c.
All amino acids have the same amino, carboxyl, and carbon groups; the only characteristic that makes an amino acid different is the R-group.
Which three components do all amino acids share in common?There is a basic structure shared by all amino acids. A hydrogen atom, an R-group, or side-chain group, a basic amino group, a carboxylic acid group, and a central carbon atom are all connected to one another by a molecule. What differentiates amino acids is their R-group.
What do you call the three bases that encode an amino acid?An amino acid is encoded by a codon, a triplet of nucleotides. An amino acid is encoded by each trio of nucleotides.
To know more about amino acids visit :-
https://brainly.com/question/14583479
#SPJ4
Classify the phrases. Does each phrase describe a kinase, a phosphatase, neither, or both?
You are currently in a sorting module. Turn off browse mode or quick nav, Tab to items, Space or Enter to pick up, Tab to move, Space or Enter to drop.
O Kinases
O hosphatases
O Neither
O Both
An enzyme known as a kinase is responsible for protein phosphate group attachment.An enzyme called a phosphatase takes a phosphate group out of a protein. Complete answer is below the picture.
What distinguishes protein phosphatases from protein kinases?Enzymes that catalyze the transfer or phosphate between its substrates include protein kinases and phosphatases.A protein phosphatase catalyzes the transfer of phosphate from the a phosphoprotein to the a water molecule, whereas a protein kinase catalyzes the transfer of -phosphate form ATP (or GTP) towards its protein substrates.
What gives proteins their phosphoryl groups?As a result of the hydrolysis of adenosine triphosphate (ATP) and the enzymatic action of kinase, the protein acquires a phosphate group.This is the mechanism that underlies the development of post-translational modifications (PTMs).Additionally, phosphatase activity makes phosphorylation a reversible process.
To know more about kinase visit:
https://brainly.com/question/17092864
#SPJ4
the information in the data table above represents two different trials for an experiment to study the rate of the reaction between no(g) and h2(g), as represented by the balanced equation above the table. which of the following statements provides the correct explanation for why the initial rate of formation of n2 is greater in trial 2 than in trial 1? assume that each trial is carried out at the same constant temperature
Compared to trial 1, trial 2, reactant molecule collisions occur more frequently.
What is meant by collision ?If the two molecules A and B are to interact, they must get close enough to each other that some of their current bonds will be broken and space will be left for any new bonds that will be required for the end products to form. A collision is the name given to such a meeting.
The collision theory postulates that the molecules of reactants are hard spheres, and that reactions can only take place when these spheres (molecules) clash with one another.
According to the collision theory, for a reaction to take place, the particles involved must collide the proper way around (with the correct orientation) and with sufficient force to cause the bonds between the reactants to be broken.
The complete question is : 2NO(g)+2H2(g)→N2(g)+2H2O(g)
The information in the data table above represents two different trials for an experiment to study the rate of the reaction between NO(g) and H2(g), as represented by the balanced equation above the table. Which of the following statements provides the correct explanation for why the initial rate of formation of N2 is greater in trial 2 than in trial 1 ? Assume that each trial is carried out at the same constant temperature.
To learn more about collision refer to :
https://brainly.com/question/29815006
#SPJ1