Why packaging lemons in cans might not be a good idea?
which type of energy would most likely create the worst environment disaster from an accident or spill
Answer:
the dessert
Explanation:
because it is dry and very few anmals live there
What are the characteristics of a neutron
Answer:
The no. Of neurons are equal to the number of protons
How many liters of NO2 are in 80.0 grams at STP
Answer: answwer is22.4 L
At STP that is standard temperature and pressure 22.4 liters of NO₂ are present in 80 grams.
What is standard temperature and standard pressure?Standard temperature and pressure are defined as a standard set of conditions required for experimental measurements which are established to allow comparison between different sets of data.
Standards which are commonly used are those International Union of pure and applied chemistry and national institute of standards and technology.These are not universally accepted standards but are the ones which are commonly used.
Standard conditions of pressure and temperature are necessary to define standard reference conditions used to express volumes of liquids and gases.
These values are important to physicists, chemists ,engineers ,pilots and navigators.
Learn more about standard temperature and standard pressure,here:
https://brainly.com/question/29129606
#SPJ6
Whar is the innermost par of the bone called
Answer:
If it's what I think you're talking about, it's called marrow.
Explanation:
Hope this helped! :)
Using the Assignment: Locating the Epicenter, What was the length of the radius of the circle of from the Buenos Aires station? (in cm)
Question 1 options:
3.2 cm
4.8 cm
5.76 cm
8 cm
Yule logs are commercially available that burn with a red and green flame. What two chemicals could produce this effect?
Answer:
Strontium chloride: Makes a red flame.
Strontium sulfate: Makes a green flame.
Copper salts (such as copper sulfate or copper chloride) and barium salts (such as barium chloride or barium nitrate) can produce a red and green flame when burned.
The colors of flames are often determined by the presence of specific chemicals or elements that emit characteristic wavelengths of light when heated. In the case of red and green flames, copper and barium salts are commonly used.
Copper salts, particularly copper sulfate or copper chloride, can produce a green flame when burned. This is due to the emission of specific wavelengths of green light by excited copper ions in the flame.
Barium salts, such as barium chloride or barium nitrate, can produce a red flame when burned. The red color is caused by the emission of specific wavelengths of red light by excited barium ions in the flame.
When these two chemicals are combined in a yule log or firework formulation, they can create a visually appealing display of red and green flames. The copper and barium ions are heated and excited by the flame, releasing their characteristic colors of light. It is important to note that the production of colored flames should be done with caution and adherence to safety guidelines to ensure proper handling and disposal of chemicals.
To learn more about chemicals, here
https://brainly.com/question/29240183
#SPJ2
Which is a component of John Dalton’s atomic theory?
The ratio of atoms in a compound is fixed.
The atoms of different elements are the same.
An atom is a small particle of matter that can be broken down.
A reaction can create or destroy atoms as well as rearrange them.
Answer: lol the answer is A
Explanation:
i’m just smart like that , thought i should give y’all a clue
Answer:
The ratio of atoms in a compound is fixed.
Explanation:
its a
If a metal donates or loses an electron it becomes a..
A. Ionic
B. Covalent
C. Metallic
Answer:
c
Explanation:
Answer:
the answer to your question is c
a + c = r solve for a
Answer: A = -c + r
Explanation:
Answer:
a = r-c. its that simple I guess
The rate of a chemical reaction is NOT affected by which of the following:
A.temperature
B.particle size (surface area)
C.concentration
D.All of these affect reaction rates
Answer:
Option B
Explanation:
Option (B) Particle size
How many total electrons does Fluorine have?
Answer:
nine electrons
Explanation:
Answer:
There are 9 total electrons. There is always the same number of protons and neutrons so the charge in the atom balances out. The atomic number is the number of protons, and electrons.
Explanation:
a metal worker uses a cutting torch that operates by reacting acetylene gas, C2H2(g), with oxygen gas, O2(g), as shown in the unbalanced equation below: C2H2(g)=O2(g)= CO2(g) = H2O(g) = heat determine the mass of 25 moles of acetylene (gram-formula mass = 26 g/mol
Answer:
650 grams
Explanation:
Given that acetylene gas reacts with oxygen to produce caobon dioxide, water and heat and the unbalnced equation is
[tex]C_2H_2(g)+O_2(g) \rightarrow CO_2(g) + H_2O(g)+ heat[/tex]
Gram-formula mass of [tex]C_2H_2= 26[/tex] g/mol
So, mass of 1 mole of acelylene is 26 grams
Therefore, mass of 25 moles of acelylene=25x26=650 grams
Hence, the mass of 25 moles of acelylene is 650 grams
The mass of 25 moles of acetylene has been 0.65 kg.
Moles are the count of a number of molecules in an entity and the mass based on the formula mass. 1 mole of a substance has [tex]\rm 6.023\;\times\;10^2^3[/tex] molecules.
The moles can be calculated as:
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Given, mole of acetylene = 25 mol
molecular mass of acetylene = 26 g/mol
Mass of acetylene = moles [tex]\times[/tex] molecular weight
Mass of acetylene = 25 [tex]\times[/tex] 26
Mass of acetylene = 650 grams
1000 grams = 1 kg
650 grams = 0.65 kg.
The mass of 25 moles of acetylene has been 0.65 kg.
For more information about the mass, refer to the link:
https://brainly.com/question/18838161
coefficients to lowest possible
ratio, if necessary.
A long thin sample of a substance is easily bent. When the substance is placed in a n electric circuit and the switch is closed, and LED light turns on. What type of bonding holds the particles of the substance together?
Answer:
A metallic bonding holds the particles of the substance together
Explanation:
The unknown substance is a metal:
It is easily bent: This means it is ductile, as it is the case with a thin metallic metallic wire."When the substance is placed in a n electric circuit and the switch is closed, and LED light turns on." This means it easily conducts electricity. Metals are good conductors.12. Which neutral atom would most likely form an ion with a 3- charge?
Answer:
phosphorus
Explanation:
it reacts by gaining three electrons in its outermost shell to be stable
Consider the following reaction: 3Fe(s) + 4H₂O(g) ➞ Fe₃O₄(s) + 4H₂(g). To answer the following question: "How many moles of hot water vapor (steam) must react to produce 275 g of Fe₃O₄?" How many steps will it take to get the answer? *
4 points
1
2
3
4
Answer: 2
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} Fe_3O_4=\frac{275g}{233.5g/mol}=1.18moles[/tex]
[tex]3Fe(s)+4H_2O(g)\rightarrow Fe_3O_4(s)+4H_2(g)[/tex]
According to stoichiometry :
1 mole of [tex]Fe_3O_4[/tex] are produced by = 4 moles of [tex]H_2O[/tex]
Thus 1.18 moles of [tex]Fe_3O_4[/tex] will be produced by=[tex]\frac{4}{1}\times 1.18=4.72moles[/tex] of [tex]H_2O[/tex]
Mass of [tex]H_2O=moles\times {\text {Molar mass}}=4.72moles\times 18g/mol=85.0g[/tex]
Thus 85.0 g of [tex]H_2O[/tex] will be required and 2 steps are required to get the answer.
Advantages and disadvantages of solar power
Answer:
Advantakes= it is a renewable source, you can but it anywhere with sunlight
disatvantage= it cost a lot to place/replace, it uses a lot of different materials
How many atoms of each element are in the chemical formula Ca(OH)2?
i really need help please will give brainliest
Answer:
Astatine is a halogen, Nitrogen is a nonmetal, Krypton is a Nobel gas, Chlorine is a halogen and Sulfur is non metal
Explanation:
i am doing this so the other person can get brainly ████████████████████████████████████████
████████████████████████████████████████
██████▀░░░░░░░░▀████████▀▀░░░░░░░▀██████
████▀░░░░░░░░░░░░▀████▀░░░░░░░░░░░░▀████
██▀░░░░░░░░░░░░░░░░▀▀░░░░░░░░░░░░░░░░▀██
██░░░░░░░░░░░░░░░░░░░▄▄░░░░░░░░░░░░░░░██
██░░░░░░░░░░░░░░░░░░█░█░░░░░░░░░░░░░░░██
██░░░░░░░░░░░░░░░░░▄▀░█░░░░░░░░░░░░░░░██
██░░░░░░░░░░████▄▄▄▀░░▀▀▀▀▄░░░░░░░░░░░██
██▄░░░░░░░░░████░░░░░░░░░░█░░░░░░░░░░▄██
████▄░░░░░░░████░░░░░░░░░░█░░░░░░░░▄████
██████▄░░░░░████▄▄▄░░░░░░░█░░░░░░▄██████
████████▄░░░▀▀▀▀░░░▀▀▀▀▀▀▀░░░░░▄████████
██████████▄░░░░░░░░░░░░░░░░░░▄██████████
████████████▄░░░░░░░░░░░░░░▄████████████
██████████████▄░░░░░░░░░░▄██████████████
████████████████▄░░░░░░▄████████████████
██████████████████▄▄▄▄██████████████████
████████████████████████████████████████
████████████████████████████████████████
The __________________ is the process by which gases in the atmosphere absorb and reradiate heat.
Answer:
I am sure it is the greenhouse effect
Explanation:
Answer:
the greenhouse effect
I think this is the answer. Pls correct me if I'm wrong.
What type of rock is this?
Answer:
I'm gonna say igneous
Explanation:
The texture looks rough and the rock looks like it's composed of different types of minerals making it an igneous rock
I hope this helps :)
Answer: Igneous
Explanation: Igneous rock, or magmatic rock, is one of the three main rock types, the others being sedimentary and metamorphic. Igneous rock is formed through the cooling and solidification of magma or lava. The magma can be derived from partial melts of existing rocks in either a planet's mantle or crust.
Science hmk due tmr morning need help!! pls answer all 3 and number which one is which for example...
1.j
2.j
3.j
True or false
Equal forces acting on one object in opposite directions are called balanced forces
Answer:
True
Explanation:
Forces, equal in magnitude and opposite in direction, and cancel each other out are called Balanced Forces.
Balanced Forces DO NOT cause any change in the velocity of the object, but the Object may correspond to a change in shape or size.
Example :
Blasting a balloon by compressing it tightly with both hands, roughly with an equal force, is a practical example of Balanced Forces. In this case, the balloon before the burst stays at a state of rest and same after the burst. But the burst or the compression, causes a change in the shape of the balloon.
Many ladybird beetles live in Pedro's garden. He observed them one summer for a science project. Pedro noticed that all the ladybird beetles had red shells. Some of the beetles had many dark spots, some had only a few dark spots, and one or two beetles had no dark spots at all. Around the same time, Pedro's father replanted the garden using just red flowers. A few years later, Pedro observed the ladybird beetles again. This time he noticed that almost all the ladybird beetles had shells with more red visible. They had few or no dark spots on their shells. Pedro concluded that replanting the garden with red flowers caused a change in the ladybird beetle population. Which best explains Pedro's observations?
Answer:
No.
Explanation:
No, Pedro's observations does not suggest that replanting the garden with red flowers caused a change in the ladybird beetle population because the colour of flower has no effect on the change in the population of ladybird beetle, it must be occur due to the dominant genes present in the population of ladybird beetle. This dominant genes is responsible for the presence of more red colour on the ladybird beetles shells.
what happen when the nitrate of an alkali metal is heatad?
answer
Gives brown colour gas
Write the name for the compound Al₂S₃
Answer:
Uh Joe stinky?
Explanation:
Answer:
Aluminum(2)sulfur(3)
Explanation:
When a candle burns, the reaction produces:
• oxygen and water
• carbon dioxide and wax
• wax and oxygen
• carbon dioxide and water vapor
Answer:
B
Explanation:
Hope this helps you
A boundary between air masses that don't move possibly causing rain for several days.
Answer:
A Front
Explanation:
A Front is a boundary between two air masses of different density, moisture, or temperature
PLEASE I NEED THIS ANSWER ASAP :(
Impurities that evaporate easily and travel with the water vapor are not removed when using this type of distillation. Explain the reason for this.
Answer:
Please add as brainlist
Explanation:
Distillation is the process of separating the components or substances from a liquid mixture by using selective boiling and condensation. Distillation may result in essentially complete separation (nearly pure components), or it may be a partial separation that increases the concentration of selected components in the mixture. In either case, the process exploits differences in the relative volatility of the mixture's components. In industrial applications, distillation is a unit operation of practically universal importance, but it is a physical separation process, not a chemical reaction.