Answer:
Since there are 3 Hydrogen atoms present, the formula mass of H is 1.0 × 3 = 3.0 g/mol. Therefore, by adding them up, the formula mass of ammonia is: [14.0 g/mol + 3.0 g/mol] = 17.0 g/mol.
6.3x10-5M. What is the pH?
Answer:
https://sensorex.com/ph-calculator/
Explanation:
go to this link and then scroll down a little bit and then you'll find the answer
Students can demonstrate reflection by doing which of the following?
A Warming metal under a heat lamp.
B. Observing their own image in still water.
C. Enlarging an image using a hand lens.
0
D. Measuring a shadow made by the Sun.
Answer:
a
Explanation:
A ________________________ can be at the top of a food chain.
Answer:
ap.ex predat0rs
Explanation:
Part A
How many moles of chlorine gas are needed to make 0.6 moles of sodium chloride?
Given the reaction: 2Na + Cl2 + 2NaCl
O 1.2
O 0.6
0 3.6
O 0.3
not enough information
Submit
Request Answer
Answer:
[tex]n_{Cl_2}=0.3molCl_2[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction whereas the sodium chloride is in a 2:1 mole ratio with chlorine, the required moles of the later are computed as shown below:
[tex]n_{Cl_2}=0.6molNaCl*\frac{1molCl_2}{2molNaCl}[/tex]
So we cancel out the moles of NaCl to obtain:
[tex]n_{Cl_2}=0.3molCl_2[/tex]
Best regards!
Jupiter's mass is more than _________ the mass of the other planets put together.
Answer:
2.5 times
Explanation:
Jupiter's mass is 2.5 times that of all the other planets in the Solar System combined—this is so massive that its barycenter with the Sun lies beyond the Sun's surface at 1.068 solar radii from the Sun's center.
Consider a buffer made by adding 132.8 g of NaC₇H₅O₂ to 300.0 mL of 1.17 M HC₇H₅O₂ (Ka = 6.3 x 10⁻⁵) What is the pH of this buffer?
Answer:
pH = 1.62
Explanation:
We can solve this problem using Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[A^-]}{[HA]}[/tex]Where
pKa = -log(Ka) = 4.20[A⁻] = [NaC₇H₅O₂][HA] = [HC₇H₅O₂]Now we convert 132.8 g of NaC₇H₅O₂ into moles, using its molar mass:
132.8 ÷ 144.11 g/mol = 0.921 molesThen we calculate [NaC₇H₅O₂]:
0.921 moles / 300.0 mL = 0.003 MNow we can proceed to calculate the pH of the solution:
pH = 4.20 + log[tex]\frac{0.003}{1.17}[/tex]pH = 1.62Considering the limiting reactant concept, how many moles of copper(1) sulfide are produced from the reaction of 20 mole of
copper and 2.4 mole of sulfur?
2 Cu(s) + s(s) Cu2S(s)
(No links or bad answer real d
10. Which of the following group of colors of the visible light is listed from
lowest to highest frequency?
A. Blue, green, red
C. Red, violet, green
B. Green, blue, red
D. Red, green, violet
Answer:
The correct answer is - D. Red, green, violet.
Explanation:
Visible light is the spectrum of light that can be seen by the naked eyes of humans without any equipment. This spectrum has various frequency light that helps us see things in color. The frequency of light ranges between seven different colors in which violet has the highest frequency and red has the lowest.
The different frequencies are as follows:
color frequency
red (limit) 1.77
red 1.91
orange 2.06
yellow 2.14
green 2.25
cyan 2.48
blue 2.75
violet (limit) 3.10
On this basis of this the group of colors of the visible light is listed from
lowest to the highest frequency - Red, green, violet
Which compound will be the most soluble in water?
a) CH3CH2CH2CH2CH3
b) CH3CH2CH2CH2OH
c) HOCH2CH2CH2OH
d) CH3CH2CH2OCH3
Answer:
c) HOCH2CH2CH2OH
Explanation:
Hope this helps
What volume will 1.27 moles of helium gas occupy at 80.00 °C and 1.00 atm?
Pls and thank you :) !
Answer:
36.8 L
Explanation:
We'll begin by converting 80 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
T(°C) = 80 °C
T(K) = 80 + 273
T(K) = 353 K
Finally, we shall determine the volume occupied by the helium gas. This can be obtained as follow:
Number of mole (n) = 1.27 moles
Temperature (T) = 353 K
Pressure (P) = 1 atm
Gas constant (R) = 0.0821 atm.L/Kmol
Volume (V) =?
PV = nRT
1 × V = 1.27 × 0.0821 × 353
V = 36.8 L
Thus, the volume occupied by the helium gas is 36.8 L
A sample of 0.0255 mol potassium hydroxide, KOH, was dissolved in water to yield
10.0 mL of solution. What is the molarity of the solution?
According to molar concentration, the molarity of the solution is 2.55 M.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.
Substituting values in the given second formula, molarity=0.0255/0.010=2.55 M.
Thus, the molar concentration of the solution is 2.55 M.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2
explain the significance
Answer:
Dictionary
Definitions from Oxford Languages
Search for a word
significance
/sɪɡˈnɪfɪk(ə)ns/
Learn to pronounce
noun
1.
the quality of being worthy of attention; importance.
"adolescent education was felt to be a social issue of some significance"
Similar:
importance
import
noteworthiness
consequence
substance
seriousness
gravity
weight
weightiness
magnitude
moment
momentousness
memorableness
unforgettableness
pronounced nature
remarkableness
outstanding nature
markedness
obviousness
conspicuousness
strikingness
distinction
impressiveness
uncommonness
unusualness
rarity
extraordinariness
exceptionalness
specialness
cruciality
Opposite:
insignificance
2.
the meaning to be found in words or events.
"the significance of what was happening was clearer to me than to her"
Similar:
meaning
sense
signification
import
thrust
drift
gist
burden
theme
implication
tenor
message
essence
substance
relevance
The nature particle model of matter describe the property of solid, liquid and gas in molecular level. Which of the given statements below is TRUE?
A. Matter is made up of large particles.
B. Particles of matter have spaces between them.
C. Particles of matter are not moving all the time.
D. The particles of matter do not attract each other.
Answer:
B. Particles of matter have spaces between them.
Explanation:
The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :
1. Matter is made of small particles of atoms or molecules.
2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.
3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.
4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.
The correct option is B.
What is the correct coefficient for Fe2O3 in the balanced version of the following equation?
Fe2O3 + 3H2 → 2Fe + 3H2O
__Fe2O3+3H2→2Fe+3H2O
Answer:
The coefficient of Fe₂O₃ is 1
Explanation:
__Fe₂O₃ + 3H₂ —> 2Fe + 3H₂O
To know the correct coefficient of Fe₂O₃, we shall balanced the equation. This can be obtained as follow:
Fe₂O₃ + H₂ —> Fe + H₂O
There are 2 atoms of Fe on the left side and 1 atom on right side. It can be balance by writing 2 before Fe as shown below:
Fe₂O₃ + H₂ —> 2Fe + H₂O
There are 3 atoms of O on the left side and 1 atom on the right side. It can be balance by writing 3 before H₂O as shown below:
Fe₂O₃ + H₂ —> 2Fe + 3H₂O
There are 2 atoms of H on the left side and 6 atoms on the right side. It can be balance by writing 3 before H₂ as shown below:
Fe₂O₃ + 3H₂ —> 2Fe + 3H₂O
Now, the equation is balanced.
Thus, the coefficient of Fe₂O₃ is 1
If 2.00 moles of H2 and 1.55 moles of Oz react how many moles of H20
can be produced in the reaction below?
2 H2(g) + O2(g) → 2 H2O(g)
When you are riding a bicycle at night, your bicycle's reflectors help people in cars see your bicycle how do bicycle reflectors work
A. They are made of a special material that gives off its own light
B. They are hooked up to batteries that allow them to produce light
C. They bounce light back from other sources
D. They are coverd with paint that glows in the dark
1. What volume of gas (NU) is formed by the interaction of 13 g of zinc with 400 g of sulfuric acid solution with a mass fraction of 10%?
Answer:
4.5L of gas are produced
Explanation:
Based on the reaction:
Zn + H2SO4 → ZnSO4 + H2(g)
Where 1 mole of Zn reacts with 1 mole of sulfuric acid to produce 1 mole of H2, the gas
To solve this question we must find the moles of each reactant in order to find limiting reactant and, thus, the moles of H2 produced. Then using PV=nRT we can find the volume of the gas:
Moles Zn -Molar mass: 65.38g/mol-
13g * (1mol / 65.38g) = 0.20 moles Zn
Moles H2SO4 -Molar mass: 98g/mol-
400g * 10% = 40g H2SO4 * (1mol / 98g) = 0.41 moles H2SO4
As the ratio of the reaction is 1:1, the limiting reactant is Zn and the moles produced of H2 are 0.20 moles
Using PV = nRT; V = nRT/ P
Where V is the volume of the gas
n are the moles = 0.20 moles
R is gas constant = 0.082atmL/molK
T is absolute temperature = 273.15K at STP
P is pressure = 1atm at STP
V = 0.20mol*0.082atmL/molK*273.15K / 1atm
V = 4.5L of gas are produced
If four hydrogen atoms react with two hydrogen atoms, how many atoms
will be in the product?
Answer:6
Explanation:
The number of atoms in the product will be equal to six.
What is the balanced chemical equation?A chemical equation represents a chemical reaction in terms of the chemical symbols of the substances. A chemical equation of a reaction posses of participated reactants, formed products, and an arrow to indicate the direction of the chemical reaction.
The chemical equation of a reaction in which the number of atoms of each element is equal on either side of the equation is known as a balanced chemical equation.
The law of conservation of mass is always followed by a balancing of a chemical equation. By following this law, the total mass of all the elements on the reactant side will be equal to the total mass of all elements on the product side in a balanced chemical equation.
Therefore, the number of hydrogen atoms on the reactant side is equal to 6 (4+2) and the same number of atoms will be on the product side.
Learn more about the balanced chemical equation, here:
brainly.com/question/15052184
#SPJ2
14.3 moles of methane (CH4) burns completely, find the grams of H20 would be produced CH4 + 202 CO2 + 2H20 w
Answer:
514.8 grams of H₂O would be produced.
Explanation:
The balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles participate in the reaction:
CH₄: 1 mole O₂: 2 molesCO₂: 1 mole H₂O: 2 molesBeing the molar mass of each compound:
CH₄: 16 g/moleO₂: 32 g/moleCO₂: 44 g/mole H₂O: 18 g/moleBy stoichiometry, the following amounts of mass participate in the reaction:
CH₄: 1 mole* 16 g/mole= 16 gramsO₂: 2 moles* 32 g/mole= 64 gramsCO₂: 1 mole* 44 g/mole= 44 gramsH₂O: 2 moles* 18 g/mole= 36 gramsYou can apply the following rule of three: if 1 mole of methane produces 36 grams of water, 14.3 moles of methane produces how much mass of water?
[tex]mass of water=\frac{14.3 moles of methane*36 grams of water}{1 mole of methane}[/tex]
mass of water= 514.8 grams
514.8 grams of H₂O would be produced.
9. The broken appearance of pencil in a glass of water is due
to the refraction of light in water,
yes or no
In the endothermic reaction below, how would adding heat affect the equilibrium of the system? (2 points)
A + B + energy ⇄ + D
a. shift it to the left toward the reactants
b. shift it to the right toward the products
c. equally create more products and reactants
d. it would have no effect
Combine terms: 12a + 26b -4b – 16a.
Answer:
= -4a+22b
Explanation:
i hope this helps :)
Answer:
12a-16a =-4a
26b -4b =22b
the final answer is-4a +22b
What would happen to the moon’s interia were to increase? A the moon will fly into space. B the moon will smash into Earth. C the moon will smash into pluto.
Answer:
B
Explanation:
Determine the mass and weight of the air in your living room at 20°C ; the room has the following dimensions ;4m ×5m floor and ceiling is at 3m height. Take the density of the air as
Answer:
Volume of air is [tex]60[/tex] cubic meter
Mass of air is [tex]72.246[/tex] Kilogram
Explanation:
As air occupies the volume of the container in which it is kept. The volume of air here in this case will be equal to the volume of the room.
Volume of the room = length * breadth * height
Volume of the room = [tex]4*5*3 = 60[/tex] cubic meter.
Volume of air is also [tex]60[/tex] cubic meter.
Density of air at 20 degrees C [tex]= 1.2041[/tex] kg/cu.m
Mass of air
Volume * density
[tex]60 * 1.2041 = 72.246[/tex] kilogram
Volume of air is [tex]60[/tex] cubic meter
Mass of air is [tex]72.246[/tex] Kilogram
The reactants of two chemical equations are listed. Equation 1: PbNO3 + Mg Equation 2: PbNO3 + KI Based on the type of reaction, which reaction can be used to extract lead metal from lead nitrate solution? (5 points)
Group of answer choices
Equation 2, because K being more reactive, exchanges position with Pb in PbNO3
Equation 2, because K being more reactive, exchanges position with N in PbNO3
Equation 1, because Mg being more reactive, replaces N from PbNO3
Equation 1, because Mg being more reactive, replaces Pb from PbNO3
Answer:
Equation 2, because K being more reactive, exchanges position with Pb in PbNO3.
Explanation:
Hello there!
In this case, according to the given reactions, it is possible to realize that according to the reactivity series, since K is is group 1A of alkali metals, we infer it is by far more reactive than magnesium, for that reason last two choices can be easily discarded. Now, considering equation 2, it would be necessary to complete it to figure out the correct option:
[tex]Pb(NO_3)_2 + KI \rightarrow PbI_2+KNO_3[/tex]
Whereas it can be seen that potassium exchanges position with Pb according to the double displacement reaction; therefore, the correct answer is "Equation 2, because K being more reactive, exchanges position with Pb in PbNO3".
Best regards!
How much heat is released if you produced 1.24 mol of Oz?
Liquid water - heat =
Pls help now!!!
Answer:
cold or ice?
Explanation:
have a good day.
How many moles of solute are in a .5 liter solution of carbonated water, if the concentration is 3.0 M?
Answer:
[tex]1 \: litre \: solution \: contains \: 3 \: moles \\ 5 \: litres \: will \: contain \: \frac{(5 \times 3)}{1} \: moles \\ = 15 \: moles \: of \: solute[/tex]
How many grams of CuSO4 are required to make a 5.0 ml solution that has a concentration of 400 mg/ml?
Answer: molecular weight of CUSO4 or grams. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles CUSO4, or 346.10221 grams. Note that rounding errors may occur, so always check the results.
Explanation:
Humans are always consumers. Most humans are omnivores, but some
humans eat only plant matter making them herbivores. However, all
humans are considered to be -
Select one:
autotrophs
heterotrophs
producers
carnivores
Answer:
A. Autotrophs
Explanation:
an autotroph, def an organism that is able to form nutritional organic substances from simple inorganic substances such as carbon dioxide.
humans and other mammals, plants, and a select few other things