What would the light pink area above the calyx be ?

What Would The Light Pink Area Above The Calyx Be ?

Answers

Answer 1

The light pink area above the calyx in a kidney would most likely be the renal pelvis.

What is the renal pelvis?

The renal pelvis is the region of the kidney's center. Here, urine gathers and is directed into the ureter, which joins the kidney and bladder. The renal pelvis' apex extends away from the kidney and merges with the superior end of the ureter.

The kidney's main function is to remove waste during the process of filtration of metabolic wastes from blood which causes urine to leave your body.

Learn more about renal pelvis at: https://brainly.com/question/30367703

#SPJ1


Related Questions

6. you are testing unpasteurized milk for the presence of bacterial contamination. starting from the undiluted milk, you do serial dilutions as shown below, and plate 1.0 ml of each dilution on agar. if the undiluted milk contains 5 x 106 bacteria/ml, how many colonies would you expect to see on each plate?

Answers

Each plate would be expected to have approximately 5 x 106 colonies of bacteria. The serial dilutions would result in a 10-fold dilution for each step. So, the dilutions would be as follows:
- 1st dilution: 1/10 (0.1)
- 2nd dilution: 1/100 (0.01)
- 3rd dilution: 1/1000 (0.001)
- 4th dilution: 1/10,000 (0.0001)
- 5th dilution: 1/100,000 (0.00001)
- 6th dilution: 1/1,000,000 (0.000001)

The undiluted milk contains 5 x 106 bacteria/ml, the number of bacteria in each dilution can be calculated by multiplying the previous dilution by 10. For example, the number of bacteria in the 1st dilution would be

5 x 106 x 0.1 = 5 x 105 bacteria/ml.

When 1.0 ml of each dilution is plated on agar, the number of colonies that grow on each plate will depend on the number of viable bacteria present in the diluted milk. Assuming that all viable bacteria will form colonies on the agar, the number of colonies on each plate can be estimated by multiplying the number of viable bacteria in the diluted milk by the dilution factor (i.e. 1/0.1 for the 1st dilution, 1/0.01 for the 2nd dilution, and so on).

Using this method, the number of colonies that would be expected on each plate can be estimated as follows:
- 1st dilution: 5 x 105 x 1/0.1 = 5 x 106 colonies/ml
- 2nd dilution: 5 x 104 x 1/0.01 = 5 x 106 colonies/ml
- 3rd dilution: 5 x 103 x 1/0.001 = 5 x 106 colonies/ml
- 4th dilution: 5 x 102 x 1/0.0001 = 5 x 106 colonies/ml
- 5th dilution: 5 x 101 x 1/0.00001 = 5 x 106 colonies/ml
- 6th dilution: 5 x 100 x 1/0.000001 = 5 x 106 colonies/ml

Therefore, each plate would be expected to have approximately 5 x 106 colonies of bacteria. However, it is important to note that such high numbers of colonies would make it difficult to count and interpret the results accurately, and may require further dilutions to obtain a countable number of colonies.

To know about Colonies Of Bacteria visit:

https://brainly.com/question/21016863

#SPJ11

The dendrites share this characteristic with the neuron cell body.

Answers

The characteristic that dendrites share with the neuron cell body is that both have the ability to receive and process incoming signals from other neurons. Here's a step-by-step explanation Dendrites are specialized extensions of the neuron, responsible for receiving and transmitting information from neighboring neurons via synaptic connections.



The neuron cell body, also known as the soma, is the central part of the neuron that contains the nucleus and other organelles necessary for the cell's functioning. Both dendrites and the neuron cell body have the ability to receive incoming signals. These signals are transmitted as chemical messages, called neurotransmitters, which are released by other neurons. When neurotransmitters bind to receptors on the dendrites or the neuron cell body, they can either excite or inhibit the neuron, depending on the type of neurotransmitter and receptor. This process allows the neuron to integrate the incoming signals from multiple sources, determining whether the sum of the signals reaches a threshold to generate an action potential an electrical impulse that will be transmitted along the neuron's axon to communicate with other neurons or target cells. In conclusion, the characteristic that dendrites share with the neuron cell body is their ability to receive and process incoming signals from other neurons, allowing for the integration and transmission of information within the nervous system.

learn more about neuron cell body here.

https://brainly.com/question/8579322

#SPJ11

concisely describe the similarities and differences between desmosomes and hemidesmosomes.

Answers

Answer:

Desmosomes act as cell to cell adhesions while hemidesmosomes act as adhesions that form between cells and the basement membrane.

Explanation:

27. Some operons have both a positive and negative control mechanism built into the DNA sequence of the operon. That means both an activator protein and a repressor protein are present simultaneously. Consider a system that has both positive and repressible negative controls. a. Describe the four combinations of active or inactive regulatory proteins that could be present at any time in the cell. b. Draw diagrams similar to those in Models 1–3 to show each of the combinations in part a. (Divide the work among group members so that each member is drawing one diagram.) c. c. Label each of the combinations in part b as "operon on" or "operon off." d. Describe in complete sentences the cellular environment(s) that would turn the operon "on."

Answers

Hi there! I'm happy to help with your question.

a. In a system with both positive and negative control mechanisms, there are four combinations of active or inactive regulatory proteins that could be present:

1. Active activator protein and inactive repressor protein
2. Active activator protein and active repressor protein
3. Inactive activator protein and inactive repressor protein
4. Inactive activator protein and active repressor protein

b. As a text-based AI, I'm unable to draw diagrams directly. However, I can help describe the diagrams for each combination:

1. Diagram 1: Show the DNA sequence of the operon with an active activator protein bound to the activator binding site and no repressor protein bound to the operator site.
2. Diagram 2: Show the DNA sequence of the operon with an active activator protein bound to the activator binding site and an active repressor protein bound to the operator site.
3. Diagram 3: Show the DNA sequence of the operon with no activator protein bound to the activator binding site and no repressor protein bound to the operator site.
4. Diagram 4: Show the DNA sequence of the operon with no activator protein bound to the activator binding site and an active repressor protein bound to the operator site.

c. Label each of the combinations in part b as "operon on" or "operon off":

1. Operon on
2. Operon off
3. Operon off
4. Operon off

d. In the cellular environment that would turn the operon "on," there should be a condition that promotes the binding of the activator protein to its binding site and prevents the repressor protein from binding to the operator site. This typically occurs when a specific substrate or co-factor is present in the cell, which binds to the activator protein and/or the repressor protein, modifying their structures and regulating their activities accordingly.

To know more about the above please click:-

https://brainly.com/question/31494396

#SPJ11

use the periodic table land your knowledge of the element to wright down the names of the following elements 1. the only metal that is liquid at room temperature and has the symbol Hg. 2. The semi metal that lies to the left of phosphorus 3. the metal that lies below baron 4 the gas with the atomic number 7? 5 The metal with the atomic number 19 6. the element that is part of the compound table the symbol Na ​

Answers

1. Mercury (Hg)

2. Antimony (Sb)

3. Lead (Pb)

4. Nitrogen (N)

5. Potassium (K)

6. Sodium (Na)

lab 9 anatomy and physiology. 1. Which gland encircles the neck of the urinary bladder in males? What is its function? 2. What is the normal volume of urine excreted in a 24-hour period? 3. Check any item in the list below that is normally found in urine: water albumin urea phosphate lons glucose uric acid sulfate ions red blood cells leukocytes creatinine sodium ions potassium ions 4. Which substance is responsible for the normal color of urine? 5. Which substance has a greater specific gravity: 1 ml of urine or 1 ml of distilled H,0? Explain your answer: 6. How would you anatomically describe the entrance point of the ureters into the urinary bladder?

Answers

1. The gland that encircles the neck of the urinary bladder in males is the prostate gland. Its function is to secrete a fluid that makes up a part of the semen and helps in the transportation and nourishment of sperm.

2. The normal volume of urine excreted in a 24-hour period is about 800-2000 ml.

3. The items that are normally found in urine are: water, urea, phosphate ions, sulfate ions, sodium ions, potassium ions, and creatinine.

4. The substance responsible for the normal color of urine is urochrome, which is a pigment produced from the breakdown of hemoglobin.

5. Urine has a greater specific gravity than distilled H2O. This is because urine contains various solutes such as urea, salts, and other waste products that increase its density and make it heavier than pure water.

6. The ureters enter the urinary bladder at an oblique angle, piercing the bladder wall and opening into the bladder lumen. The opening of the ureter is guarded by a flap-like valve that prevents the backflow of urine from the bladder to the ureters.

To know more about prostate gland, refer here:

https://brainly.com/question/17373062#

#SPJ11

If the DNA gene CTCTGATAGATT was mutated to read CTCTAGATT, this would be considered a(an) _____mutation. a. deletion
b. translocation
c. insertion d. inversion

Answers

A(n) inversion would occur if the DNA gene CTCTGATAGATT was altered to read CTCTAGATT. Option d is Correct.

By introducing the stop codon, a single point mutation can cause the protein sequence to end. Either addition or mutation by substitution can cause this. The gene product can change if a gene's nucleotide sequence is changed. The three-letter words that make up each phrase stand in for mRNA codons.

Similar to how a gene may have a replacement, deletion, or insertion mutation, the identical phrases can be written with one of these changes. When a population is evolving through genetic drift, a mutation that causes one base in a DNA sequence to shift to another will eventually: Displace the sequence.

Learn more about DNA gene visit: brainly.com/question/2131506

#SPJ4

5. using your textbook or another reference, find the method of action of the active ingredient(s) in the test substance.

Answers

The disc-diffusion method is employed to evaluate a chemical disinfectant's potency against a specific bacterium. The use-dilution test establishes a disinfectant's efficacy on a surface.

How can the potency of a disinfectant be tested?

The use-dilution test is frequently employed to assess a chemical's capacity to disinfect an inanimate surface. For this test, a stainless steel cylinder is submerged in a culture of the intended microorganism, dried, and then used.

It functions as an oxidative biocide to produce free radical species to cause oxidative damage to DNA, proteins, and membrane lipids. Hydrogen peroxide's biocidal effects are assumed to be a result of the Fenton reaction, which produces free hydroxyl radicals.

learn more about dilution test

https://brainly.com/question/6635723

#SPJ1

1. when you fracture your tibia in a skiing accident, what type of loads are on the bone?

Answers

When you fracture your tibia in a skiing accident, the bone is subjected to two types of loads: compressive load and bending load.

The compressive load is the force that compresses the bone, while the bending load is the force that causes the bone to bend. These two loads can cause the bone to break or fracture, depending on the magnitude of the force and the strength of the bone.

In addition, there may be shear loads on the bone, which is the force that causes the bone to slide against each other, but this is less common in tibia fractures.

Learn more about bone here: https://brainly.com/question/11401217

#SPJ11

Assume that one counted 67 plaques on a bacterial plate where 0.1ml of a 10-5 dilution of phage was added to bacterial culture. What is the initial concentration of the undiluted phage? Show your calculations and give your answer in pfu/ml (pfu -plaque-forming units)

Answers

The initial concentration of the undiluted phage would be 670 pfu/ml.

Calculating the concentration of the undiluted phage:

To calculate the initial concentration of the undiluted phage, we first need to calculate the number of phages that were added to the bacterial plate.

We know that 0.1 ml of a 10^-5 dilution of phage was added to the bacterial culture, so we can calculate the volume of the undiluted phage that was added as follows:

Volume of undiluted phage = 0.1 ml x (10^5) = 10 ml

Next, we can calculate the number of phages in the undiluted sample using the number of plaques counted on the bacterial plate:

Number of phages = (number of plaques) / (volume plated)

We plated 0.1 ml of the phage-bacterial culture mixture, so the volume plated is 0.1 ml.

Number of phages = 67 / 0.1 ml = 670 pfu/ml

Therefore, the initial concentration of the undiluted phage is 670 pfu/ml.

To know more about bacterial culture, visit:

https://brainly.com/question/30452324

#SPJ11

a common misconception is that extinction simply means ____________________ the behavior.

Answers

A common misconception is that extinction simply means stopping the behavior.

The process of extinction involves withholding the reinforcement that previously maintained the behavior, resulting in a decrease in the frequency or intensity of the behavior over time. extinction is a more nuanced process that involves a number of factors and can take time to fully take effect.

Also, extinction is highly dependent on the context in which the behavior occurs. If the individual is able to access reinforcement for the behavior in other contexts or situations, the behavior may persist despite efforts to extinguish it in one context. It is a complex process that requires careful implementation and may take time to fully take effect.

To learn more about extinction , here

brainly.com/question/14482178

#SPJ4

A common misconception is that extinction simply means stopping the behavior.

The process of extinction involves withholding the reinforcement that previously maintained the behavior, resulting in a decrease in the frequency or intensity of the behavior over time. extinction is a more nuanced process that involves a number of factors and can take time to fully take effect.

Also, extinction is highly dependent on the context in which the behavior occurs. If the individual is able to access reinforcement for the behavior in other contexts or situations, the behavior may persist despite efforts to extinguish it in one context. It is a complex process that requires careful implementation and may take time to fully take effect.

To learn more about extinction , here

brainly.com/question/14482178

#SPJ4

what is the role of O2, CO2 and H2O in cellular respiration

Answers

O2 is the final electron acceptor. In the etc o2 accepts the electrons from the proteins and comes together with the H+ in the gradient to form h2o( water). Co2 is released during the Krebs cycle when a molecule looses a carbon atom. For example when isocitrate becomes a- ketigluterate it loses a carbon which turns to co2. This happens again with a-ketogluterate and succinyl-coA. Also co2 is released during fermentation which only happens if oxygen isn’t present. Fermentation happens after glycolysis and the sole purpose of fermentation is to recycle NAD+ to continue glycolysis since there is no oxygen. Also water is moving in and out during Krebs cycle( citric acid cycle).

how does thick mucus affect a patient with a viral respiratory infection?choose one:a. thick mucus prevents viruses from replicating in epithelial cells.b. thick mucus improves the function of the mucociliary escalator.c. thick mucus reduces the effectiveness of the mucociliary escalator.d. thick mucus protects underlying tissues from secondary bacterial infections.

Answers

Thick mucus reduces the effectiveness of the mucociliary escalator. So, the correct answer is C. In a healthy respiratory system, the mucociliary escalator consists of mucus and tiny hair-like structures called cilia lining the respiratory tract.

When a patient has a viral respiratory infection, the body produces thick mucus as a defence mechanism to trap the virus and prevent it from spreading further into the respiratory tract which makes it more difficult for the cilia to effectively move the mucus for the mucociliary escalator - the mechanism that helps move mucus out of the respiratory tract - to function properly.  As a result, the mucociliary escalator's ability to clear the respiratory tract of pathogens and particles is reduced, allowing the infection to persist or worsen.

To know more about Respiratory System visit:

https://brainly.com/question/22182638

#SPJ11

consider a coding strand of dna with the sequence 5' gaattcggca 3'. what is the sequence of the mrna after transcription of this piece of dna?

Answers

A coding strand of dna with the sequence 5' gaattcggca 3'. The mRNA sequence after transcription is: 5' GAAUU CGGCA 3'.


The information in DNA is transferred to a messenger RNA (mRNA) molecule by way of a process called transcription.
To determine the sequence of the mRNA after transcription of the coding DNA strand with the sequence 5' GAATTCGGCA 3';
1. Identify the coding strand: 5' GAATTCGGCA 3'
2. Transcribe the coding strand into mRNA by substituting the corresponding RNA bases for the DNA bases (A -> U, T -> A, C -> G, G -> C): Thus, mRNA sequence after transcription is: 5' GAAUU CGGCA 3'.

To know more about mRNA transcription https://brainly.com/question/29789363

#SPJ11

Can someone make a dichotomous key with 15 types of mushrooms


don't use AI

Answers

a dichotomous key is a tool used to identify organisms based on their characteristics and can be created by following a systematic process of elimination through a series of questions.

What is the purpose of a dichotomous key?

The purpose of a dichotomous key is to help identify and classify organisms based on their physical characteristics by using a series of questions with two possible answers that eventually lead to the identification of a specific organism.

Does the cap have scales or warts? (Go to 2 if yes, go to 3 if no)

Does the cap have warts or spots? (Go to 4 if yes, go to 5 if no)

Is the cap slimy or smooth? (Go to 6 if slimy, go to 7 if smooth)

Does the mushroom have a ring on the stem? (Go to 8 if yes, go to 9 if no)

Is the cap convex or flat? (Go to 10 if convex, go to 11 if flat)

Does the mushroom have a veil that covers the gills? (Go to 12 if yes, go to 13 if no)

Does the mushroom have a partial veil? (Go to 14 if yes, go to 15 if no)

Does the stem have scales or warts? (Mushroom A)

Does the stem have a bulbous base? (Mushroom B)

Does the cap have a central depression? (Mushroom C)

Does the cap have a nipple-like protrusion in the center? (Mushroom D)

Are the gills free or attached to the stem? (Mushroom E)

Does the stem have a ring that easily comes off? (Mushroom F)

Are the gills white or cream-colored? (Mushroom G)

Are the gills pink or brown? (Mushroom H)

Learn more about dichotomous key here:

https://brainly.com/question/2235448

#SPJ1

What is the resident microbial population of the human fetus is usually expected to bA. zeroB. sparse. C. complex. D. symbiotic E. Dense

Answers

The resident microbial population of the human fetus is usually expected to be A. zero, as the fetus is considered to be in a sterile environment while inside the womb.

Microbial colonization starts from birth and distinct species of bacteria (mainly streptococci) are recovered from the mouth of infants only a few hours old. At this stage, only mucosal surfaces are available for colonization.

Colonizing bacteria must adhere to the mucosal surface, obtain nutrients for growth, evade host immunity, and transmit to a new host. The stages of adherence are associated with mucus, forming weak interactions with host carbohydrates, and strong binding to host surface proteins.

Microbial colonization begins after birth through exposure to the external environment, including the mother's microbiota.

To know more about the population, click here:-

https://brainly.com/question/27991860

#SPJ11

the citric acid cycle occurs in the a.inner membrane of mitochondrion. b.nucleus. c.smooth endoplasmic reticulum. d.rough endoplasmic reticulum. e.mitochondrial matrix. f.golgi apparatus.

Answers

The citric acid cycle occurs in the mitochondrial matrix, which is the innermost compartment of the mitochondrion. It does not occur in the nucleus, smooth endoplasmic reticulum, rough endoplasmic reticulum, or Golgi apparatus.

The citric acid cycle, also known as the Krebs cycle, is a series of chemical reactions that occur in the mitochondrial matrix. The mitochondrial matrix is the innermost compartment of the mitochondrion, which is an organelle found in most eukaryotic cells responsible for energy production. The citric acid cycle plays a crucial role in the process of aerobic respiration, where it breaks down acetyl-CoA into carbon dioxide, generating energy in the form of ATP. The cycle is specific to the mitochondrial matrix and does not occur in other cellular compartments, such as the nucleus, smooth endoplasmic reticulum, rough endoplasmic reticulum, or Golgi apparatus, as these organelles do not possess the necessary enzymes and substrates required for the cycle to occur.

learn more about citric acid here:

https://brainly.com/question/29857075

#SPJ11

1. Evolution of life during the Precambrian Period Most of the major advancements in the development of life on Earth occurred during a time early in Earth's history called the Precambrian Period. The following time line summarizes the current understanding of how the different forms of life developed during this period. The three main lineages are the three domains of life: Archaea, Eukarya, and Bacteria. The time line shows when different traits arose in these domains and how some traits passed from one domain to another. Use the slider bar at the bottom of the time line to move back and forth across the entire image. High hydrogen, woyo atmosphere Crypen released by bacteria Degins to accumulate Antheric perches moderne Archaea Punimals and some prot Pants . Bacteria Precambrian Period Hadean Eon Archean Eon Proterozoic Eon Phaneroroic Eon 4.5 4.0 3.0 3.5 1.5 0.5 0 1.0 2.5 2.0 Billions of Years Before the Present The letters on the time line indicate five major events in the origin of life. Which of these letters indicates the time in which the ancestors of modern day Bacteria and Archaea diverged? B ос A OD Which of the following major changes to Earth's environment occurred toward the end of the Precambrian Period? Carbon dioxide in the atmosphere reached a level similar to the carbon dioxide level of today, Free oxygen in the atmosphere reached a level similar to the oxygen level of today. Liquid water first began to appear on the Earth's surface. Which of the following statements explains the current understanding of how the ancestors of modern-day eukaryotic cells acquired mitochondria? Mitochondria were originally free-living heterotrophic bacterial cells that became enveloped by the ancestors of eukaryotic cells. Instead of being digested, these bacterial cells developed a symbiotic relationship with the larger cell, called endosymbiosis, Mitochondria were originally free-living archaeal cells that became enveloped by the ancestors of eukaryotic cells. Instead of being digested, these archaeal cells developed a symbiotic relationship with the larger cell, called endosymbiosis Mitochondria were originally free living heterotrophic bacterial cells that accidentally crossbred with the ancestors of eukaryotic cells When the genes of these two organisms combined, the resulting cells had the ability to make mitochondria. This crossbreeding event is Which of the following statements explains the current understanding of how the ancestors of modern-day eukaryotic cells acquired mitochondria? Mitochondria were originally free-living heterotrophic bacterial cells that became enveloped by the ancestors of eukaryotic cells. Instead of being digested, these bacterial cells developed a symbiotic relationship with the larger cell, called endosymbiosis. Mitochondria were originally free-living archacal cells that became enveloped by the ancestors of eukaryotic cells. Instead of being digested, these archaeal cells developed a symbiotic relationship with the larger cell, called endosymbiosis. Mitochondria were originally free-living heterotrophic bacterial cells that accidentally crossbred with the ancestors of eukaryotic cells. When the genes of these two organisms combined, the resulting cells had the ability to make mitochondria. This crossbreeding event 15 called endosymbiosis. years According to this time line, the ancestral cells of modern-day eukaryotic cells first acquired mitochondria around ago, during the

Answers

The letter "B" indicates the time in which the ancestors of modern-day Bacteria and Archaea diverged. Toward the end of the Precambrian Period, free oxygen in the atmosphere reached a level similar to the oxygen level of today.

The current understanding of how the ancestors of modern-day eukaryotic cells acquired mitochondria is that mitochondria were originally free-living heterotrophic bacterial cells that became enveloped by the ancestors of eukaryotic cells. Instead of being digested, these bacterial cells developed a symbiotic relationship with the larger cell, called endosymbiosis. The ancestral cells of modern-day eukaryotic cells first acquired mitochondria around 1.5 billion years ago, during the Proterozoic Eon.
During the Precambrian Period, major advancements in the development of life on Earth occurred, leading to the formation of the three domains of life: Archaea, Eukarya, and Bacteria. The ancestors of modern-day Bacteria and Archaea diverged at the point indicated by letter B on the timeline. Toward the end of the Precambrian Period, a major change to Earth's environment occurred when free oxygen in the atmosphere reached a level similar to the oxygen level of today.
The current understanding of how the ancestors of modern-day eukaryotic cells acquired mitochondria is that mitochondria were originally free-living heterotrophic bacterial cells that became enveloped by the ancestors of eukaryotic cells. Instead of being digested, these bacterial cells developed a symbiotic relationship with the larger cell, called endosymbiosis.
According to this timeline, the ancestral cells of modern-day eukaryotic cells first acquired mitochondria around 2 billion years ago, during the Proterozoic Eon.

To know more about Archaea click here:

brainly.com/question/4185997

#SPJ11

Question
What would most likely occur over time if
many of the producers in an ecosystem
were killed by disease?
O Less energy would be available to
consumers at all levels.
O More energy would be available for
new producers.
O Decomposition would slow
dramatically.
O Herbivores would have less food, but
carnivores would not be affected.

Answers

Answer:

A

Explanation:

Less energy would be available

the dashed blue part (arrow) of the newly synthesized strand of DNA is:
a. Synthesized discontinuously b. Synthesized conservatively c. Not synthesized at all d. Synthesized continuously

Answers

The dashed blue part (arrow) of the newly synthesized strand of DNA is synthesized discontinuously. Option (a) is correct answer.

This process is known as Okazaki fragments. During DNA replication, the leading strand is synthesized continuously, while the lagging strand is synthesized discontinuously.

The discontinuous synthesis occurs because the DNA polymerase can only add nucleotides in the 5' to 3' direction. On the lagging strand, the DNA polymerase moves away from the replication fork,

making it impossible to synthesize the new strand in one continuous piece. Instead, the lagging strand is synthesized in small fragments called Okazaki fragments,

which are later joined by DNA ligase to form a continuous strand. Overall, the synthesis of the lagging strand is more complicated than the synthesis of the leading strand due to its discontinuous nature.

To learn more about : DNA

https://brainly.com/question/16099437

#SPJ11

Microfilaments and microtubules are cytoskeletal elements that also function in the cell shape and cell movements. Determine whether each of the following statements describes microfilaments, microtubules or both?
a. Dimers polymerize into protofilametns that then associate side by side
b. monomers bind GTP
c. 13 Protofilaments associate to form a hollow tube
d. Monomers bind ATP
e. Polymer of globular subunits
f. all the nucleotide-binding sites point the same direction.
g. fibers polymerize and depolymerize quickly
h. structure is a double chain of subunits

Answers

a. Microtubules
b. Both Microfilaments and Microtubules
c. Microtubules
d. Microfilaments
e. Both Microfilaments and Microtubules
f. Microtubules
g. Both Microfilaments and Microtubules
h. Microtubules

Microtubules are cylindrical structures that are part of the cytoskeleton, a network of protein fibers that helps maintain the shape and structure of cells. Microtubules are made up of a protein called tubulin, which forms long, hollow tubes that are typically around 25 nanometers in diameter. Microtubules play many important roles in the cell. They are involved in cell division, where they form the spindle fibers that help separate the chromosomes during mitosis. They also help transport materials within the cell, serving as tracks for motor proteins to move along. Microtubules are dynamic structures that can rapidly grow and shrink in response to changes in the cell. This dynamic behavior is regulated by a variety of proteins that bind to microtubules and control their assembly and disassembly. In addition to their role within cells, microtubules also play important roles in other biological processes. For example, they are involved in the beating of cilia and flagella, the structures that allow some cells to move. They are also important for the formation of the mitotic spindle in meiosis, the process of cell division that produces gametes.

Learn more about Microtubules here:

https://brainly.com/question/29992576

#SPJ11

What components of the electron transport pathway are associated with Complex II?
(Select all that apply.)
NADH
Coenzyme Q
FADH2
Flavin mononucleotide
Cytochrome c
Cytochrome b
Cytochrome a

Answers

The correct components associated with Complex II are FADH2, FMN, and succinate.

NADH, coenzyme Q, cytochrome c, cytochrome b, and cytochrome a are not directly associated with Complex II.

FADH2: FADH2 (flavin adenine dinucleotide) is a molecule that carries electrons to Complex II. It is generated during the citric acid cycle (also known as the Krebs cycle or TCA cycle) when succinate is converted to fumarate.

Flavin mononucleotide: Flavin mononucleotide (FMN) is a coenzyme that is tightly bound to Complex II and serves as an intermediate in the electron transfer process. It accepts electrons from FADH2 and donates them to coenzyme Q.

Succinate: Succinate is a substrate that is oxidized by Complex II, generating FADH2 and transferring electrons to FMN.

Learn more about cytochrome here https://brainly.com/question/31392616

#SPJ11

two clinically significant genera of bacteria that are capable of producing endospores are clostridium and bacillus. true or false?

Answers

The correct answer is True. Clostridium and Bacillus are two clinically significant genera of bacteria that are capable of producing endospores. Endospores are highly resistant to heat, chemicals, and radiation, and can survive in extreme environments for long periods of time.

Clostridium species are gram-positive, anaerobic bacteria that are widely distributed in soil and water. Some species, such as Clostridium tetani and Clostridium botulinum, are responsible for severe diseases in humans. Bacillus species are also gram-positive bacteria found in soil and water, and some species, such as Bacillus anthracis, can cause serious infections in humans and animals. Understanding the properties and characteristics of endospores is important for developing effective strategies for controlling and preventing the spread of bacterial infections caused by these two genera of bacteria.

To know more about Clostridium

https://brainly.com/question/14702188

#SPJ11

read producure 8.4 and 8.6. why do we use onion root tips and whitefish blastulas to view cellsin mitosis

Answers

Onion root tips and whitefish blastulas are commonly used to view cells in mitosis because they are both rapidly dividing tissues, which means that there are many cells undergoing mitosis at any given time.


Why do we use onion root and whitefish blastula to view cells in mitosis?

In onion root tips, the actively dividing cells are located at the root tip, which contains a region called the meristem. These cells are in the process of producing new root tissue, and therefore, are frequently undergoing mitosis. By examining these cells, scientists can study the various stages of mitosis, including prophase, metaphase, anaphase, and telophase.
Similarly, whitefish blastulas are also commonly used to study mitosis because they are early-stage embryos that are rapidly dividing to form new cells. This makes it easier to observe the different stages of mitosis and the changes that occur within the cell during this process. Overall, the use of onion root tips and whitefish blastulas allows scientists to study mitosis in detail and understand the complex processes that occur during cell division.


Learn more about usage of onion root to view cell in mitosis by clicking this link :

https://brainly.com/question/24839593

#SPJ11

Using the Metabolic Map as a resource, select the statement that describes the similar roles of ornithine in the urea cycle and oxaloacetate in the citric acid cycle.a. Both are degraded during each turn of a cycle.b. Both require ATP or NADPH.c. Both accept material during their respective cycle.d. Both are produced in mitochondria.

Answers

The Metabolic Map as a resource, the statement that best describes the similar roles of ornithine in the urea cycle and oxaloacetate in the citric acid cycle is: (c). Both accept material during their respective cycle.


In the urea cycle, ornithine plays a crucial role in detoxifying ammonia by accepting a carbamoyl phosphate molecule, ultimately forming citrulline. This reaction takes place in the mitochondria and is facilitated by the enzyme ornithine transcarbamylase.


Similarly, in the citric acid cycle, oxaloacetate serves as a key intermediate that accepts an acetyl-CoA molecule to form citrate. This reaction occurs in the mitochondrial matrix and is catalyzed by the enzyme citrate synthase.


In both cycles, ornithine and oxaloacetate act as acceptors, allowing the cycles to progress and perform their essential functions: detoxification of ammonia in the urea cycle and energy production in the citric acid cycle. While there are other differences and unique aspects to each cycle, the primary similarity lies in the accepting roles of these two molecules.The correct answer is c .

Know more about  Metabolic Map here :

brainly.com/question/29581979

#SPJ11

The correct statement which describes the similar roles of ornithine in the urea cycle and oxaloacetate in the citric acid cycle is c, Both accept material during their respective cycle.

Option a is incorrect because only ornithine is degraded during the urea cycle, not oxaloacetate in the citric acid cycle. Option b is incorrect because while both cycles require energy in the form of ATP, only the citric acid cycle requires NADPH. Option d is incorrect because ornithine is produced in the cytosol, not the mitochondria. Ornithine is a molecule that accepts ammonia during the urea cycle, while oxaloacetate accepts acetyl-CoA during the citric acid cycle. Both molecules act as intermediates in their respective cycles, accepting and transferring material to keep the cycle going. Thus option c, both accept material during their respective cycle is the correct statement.

Learn more about the citric acid cycle: https://brainly.com/question/14900762

#SPJ11

The ingestion of food, the formation of a food vacuole, and the movement of food vacuoles in Paramecium. Note any color changes in the food vacuoles _______

Answers

The food vacuole then travels to the cytoplasm, where digestive enzymes break down the food. As the food is digested, the food vacuole changes color from transparent to a darker color.

Paramecium is a unicellular organism that feeds on bacteria and other small organisms. When Paramecium ingests food, it surrounds it with its , and forms a food vacuole.

The food vacuole then travels to the cytoplasm, where digestive enzymes break down the food. As the food is digested, the food vacuole changes color from transparent to a darker color. Once the food is fully digested, the waste material is expelled from the cell through the  The movement of food vacuoles in Paramecium is controlled by contractile vacuoles, which pump water out of the cell and help propel the food vacuole through the cytoplasm. Overall, the ingestion of food and the formation and movement of food vacuoles are crucial for Paramecium's survival and growth.
In Paramecium, ingestion occurs when food particles are taken in through the oral groove. These particles are then enclosed within a food vacuole, which is a membrane-bound compartment. The food vacuoles move throughout the Paramecium via cytoplasmic streaming, aiding in digestion and absorption of nutrients. As the food gets digested within the food vacuoles, color changes might be observed, typically fading from the original color of the ingested particles ITS appearance as nutrients are absorbed.

To know more about unicellular organism click here:

brainly.com/question/15299967

#SPJ11

Hypothesize if the rbcL DNA fragment that has been amplified in your PCR reactions, will it be seen on the gel as a specific size?

Answers

Yes, make the assumption that the primers-r DNA fragment or piece that was amplified in your PCR reactions will appear on the gel as a particular size.

Calculating the log value of the molecular weight value for the various bands of a DNA standard against the amount of time traveled by each band can reveal the precise sizes of separated DNA fragments.

Smaller DNA fragments travel through the gel more quickly than larger ones because they all have the same amount of charge per mass. Smaller DNA molecules often travel more quickly than bigger ones. The molecules eventually split according to size. Bands (tiny rectangles) of DNA will show up on the gel if the components fit into only a few distinct sizes.

Learn more about DNA fragment visit: brainly.com/question/17568989

#SPJ4

Compare two different categories of heterotrophs in terms of how they obtain nutrients. Write your response in your own answer.

Answers

Explanation:

2nd (whay flp)quiz

1. 'World largest aloevera & bee company' - related to:

a) Himalaya

b) Patanjali

c) Forever Living

2. What do you think about 'Multi-Billion Business Turnover' of FLP generates annually?

a) Consistent business growth

b) Sometimes rising & decreasing

c) Downfall of market

3. 'Vertically Integrated' means

a) Only raw materials supply

b) Own 'plant to product' process

c) Manufacturing only

4. 'The power of Forever,is the power of love' - quoted by

a) Rex Maughan,CEO

b) Gregg Maughan,President

c) Navaz Ghaswala,Founding Member

5. What brings Forever Living in market?

a) The number 1

b) The only 1

c) Both of them

6. What's the most net worth industry below?

a) Textile Industry

b) Travel & Tourism Industry

c) Wellness Industry

7. Forever Living deals with:

a) Direct Business Model,Time Leverage, Passive Income

b) Traditional Business,Passive Income

c) Employee,Active Income

8. Forever Argi+ is a

a) Football world cup 'Energy Booster Drink'

b) Nobel prize winning product

c) Both of them

9. Forever Living is:

a) An international business

b) Cash rich & Debit Free

c) Old & Stable company

d) All of the above

10. We're paid on the basis of:

a) Only selling products typically

b) Business Turnover

c) None of them

what type of oocyte is released during ovulation oocytes within primordial

Answers

A mature oocyte is discharged from the ovary through the fallopian tube during ovulation. A secondary oocyte is an oocyte as is released during ovulation.

During ovulation, the secondary oocyte separates from the ovary and is enveloped by a layer of cells known as the corona radiata. The corona radiata shields the oocyte during its travels down the fallopian tube.

The process by which a mature egg comes out from the ovary and travels into the fallopian tubes in order to be fertilized by sperm is known as ovulation. Ovulation occurs during the menstrual cycle and is modulated by the body's hormones. The brain, pituitary gland, and ovaries create hormonal compounds that control ovulation.

learn more about oocytes here:

https://brainly.com/question/3804222

#SPJ4

Complete question:

what type of oocyte is released during the ovulation of oocytes within primordial Reproduction?

During ovulation, a mature or secondary oocyte is released from the ovary. Primordial follicles contain immature primary oocytes.

Ovulation is the process by which a mature ovarian follicle, which contains an oocyte (immature egg cell), ruptures and releases the oocyte from the ovary. This usually occurs midway through the menstrual cycle, approximately 14 days before the start of the next menstrual period. The released oocyte is then swept into the fallopian tube, where it may be fertilized by sperm and develop into a zygote.

A secondary oocyte is a haploid cell that is produced during the process of oogenesis, which is the formation of female gametes or ova. The secondary oocyte is formed after meiosis I, which reduces the chromosome number from diploid to haploid. Unlike the first polar body, which is very small and degenerates, the secondary oocyte is much larger and undergoes meiosis II only if fertilized by a sperm.

To know more about ovulation

brainly.com/question/25724530

#SPJ11

Which process occurs whether or not oxygen is present and occurs in the cytosol 29?

Answers

The process that occurs whether or not oxygen is present and takes place in the cytosol is glycolysis.

Glycolysis is a metabolic pathway that converts glucose, a six-carbon sugar, into two molecules of a three-carbon compound called pyruvate. This process is essential for producing cellular energy, known as adenosine triphosphate (ATP), in all living organisms.


Glycolysis is a series of ten enzyme-catalyzed reactions, which can be divided into two phases: the energy investment phase and the energy payoff phase. In the energy investment phase, two ATP molecules are consumed to activate glucose, while in the energy payoff phase, four ATP molecules are generated, resulting in a net gain of two ATP molecules.


The process of glycolysis is anaerobic, meaning it does not require oxygen. If oxygen is available, the pyruvate produced can be further metabolized through the citric acid cycle (also called the Krebs cycle) and oxidative phosphorylation in the mitochondria to produce a higher yield of ATP. If oxygen is not available, pyruvate undergoes fermentation, which is an anaerobic process that regenerates the necessary cofactors for glycolysis to continue.


In summary, glycolysis is a crucial metabolic pathway that occurs in the cytosol and generates ATP in the absence or presence of oxygen. It plays a significant role in cellular energy production and allows cells to function efficiently under various environmental conditions.

Know more about Glycolysis here :

brainly.com/question/1966268

#SPJ11

Other Questions
How does Denise Levertov use her craft to write the truth of the horror of world? Write a whole paragraph with two piece of evidence and reasoning. Please help due today A 5.0-cm-wide diffraction grating has 2100 slits. it is illuminated by light of wavelength 510 nm .Part A What is the angle (in degrees) of the first diffraction order? Express your answer to three significant figures and include the appropriate units. ANSWER: 1 = Part B What is the angle (in degrees) of the second diffraction order? Increasing the physician supply can be achieved through all of the following ways, except:The amount of work effort and practice costs of providing a given service relative to other servicesEarly retirement of practicing physicianDespite fertility rates decreasing, the number of C-Sections performed increased Discuss the similarities and differences in the behavior of the metals tested with water relative to their positions in the periodic table. Compare behavior within a family and in the same period. What would you predict to be the relative reactivities of cesium and lithium with water? Compare the reactivities of Groups IIA and IIIA with dilute acids. 1 kg of water at 100c is poured into a bucket that contains 4 kg of water at 0c. find the equilibrium temperature 2.In the context of this text, how do people face death? Cite evidence from this text,your own experience, and other literature, art, or history in your answer. Let f be a function with third derivative f (x) = (4x + 1) 7. What is the coefficient of (x - 2)^4 in the fourth-degree Taylor polynomial for f about x = 2 ?a. b. 3/4. c. 9/2. d. 18 . describe an algorithm that determines whether a function from a finite set of integers to another finite set of integers is onto. 1. did you come up with a design that prevents the egg from breaking? describe your approach in detail. All of the following will help avoid a cross contamination except a) keeping cooked food separated from raw food b) using a scoop with a handle for all bulk items c) washing hands frequently d) cleaning food contact surfaces once a day assuming that the reaction occurred over a 20 minute time period, what is the rate of the reaction in mm/min? The Nazis expanded their power after Hitler was named chancellor of Germany. Even though most Germans never voted for Hitler or the Nazi Party, he was able to persuade the German parliament to grant him sweeping powers with the passage of the Enabling Act. By March 1933, he was a dictator with no checks on his power.Which supporting fact or detail would make this body paragraph stronger?the name of the men who drafted the Enabling Actthe specific month and day the Enabling Act was passedthe percentage of people who did not vote for the Nazi Partythe name of the man who served as chancellor before Hitler Look at the periodic table, and then order the following elements according to decreasing electronegativity: Li, K, Br, C, Cl. Rank the elements from most electronegative to least electronegative. To rank items as equivalent, overlap them. Submit a 2-3 page double-spaced Essay: Examining the Micromanager as found in the chapter. Make sure to include APA cited references and in-text citations for any information that you use from other sources.In essay form, explain in detail why you believe micromanagers behave as they do, and why supervisors who attempt to lead by micromanaging employees are destined for failure in the long run. What are two red flags in this headline that suggest it may be clickbait?A.The use of nounsB.The use of second person ("you")C.The verb "eating"D.The exclamation point (!) (PLEASE HELP ME WITH FINDING THE EXCEL FORMULAS ROUNDING TO THE DECIMAL PLACES) EX inventory turnover ratio is =ROUND(F8/((B10+C10)/2),2) THANK YOU!!Zimmer, Inc. has provided its recent financial statements. The Controller has asked you to use this information to compute and interpret financial ratios that managers are going to use to assess liquidity and use for asset and debt management purposes. Use the information included in the Excel Simulation and the Excel functions described below to complete the task.EXCEL functions:Cell Reference: Allows you to refer to data from another cell in the worksheet. From the Excel Simulation below, if in a blank cell, "=B7" was entered, the formula would output the result from cell B7, or 360,000 in this example.Basic Math functions: Allows you to use the basic math symbols to perform mathematical functions. You can use the following keys: + (plus sign to add), - (minus sign to subtract), * (asterisk sign to multiply), and / (forward slash to divide). From the Excel Simulation below, if in a blank cell "=C13+C14" was entered, the formula would add the values from those cells and output the result, or 1,900,000 in this example. If using the other math symbols the result would output an appropriate answer for its function.ROUND function: Allows you to round a number or result of a formula calculation to a specific number of digits. The syntax of the ROUND function is "=ROUND(number,num_digits)" and returns the result of your formula rounded to a particular number of digits. The number argument can be a cell reference to a number or a formula itself that results in a number. The num_digits argument is the number of digits you want to round. The num_digits value rounds based on basis mathematical rounding rules, where anything below 5 will round down and anything 5 and above rounds up. Also, the num_digits value should be a positive value to round to any number of decimal places, while a negative value would round to the left of the decimal place, and a zero would round to the nearest whole number. If the value 1,253.5693 was entered in cell A1, it can be used in the ROUND function as the number reference. In this example, if the value in cell A1 should be rounded to 2 decimal places, in a new cell the function would be written as "=ROUND(A1,2)" and would result in as 1,253.57 in this example. If the number in cell A1 should be rounded to the nearest hundred place, in a new cell the function would be written as "=ROUND(A1,-2)" and would result in 1,300 in this example.Hints:Each yellow cell must contain a formula that can calculate the required ratio (you can NOT input the ratio itself). Make sure you start each formula with the "=" sign. For example, gross margin percentage is calculated by dividing the gross margin by total sales, so input the formula "=F9/F7". You could also input the equals sign to start your formula and then click on the F9 cell then input the divide sign and then click on the F7 cell.Make sure you follow the rounding instructions. For example, the debt to equity ratio is to be rounded to two decimals using the formula "=ROUND(B24/B28,2)". If you are rounding to the nearest whole number, you are rounding to zero decimals. For example, the average collection period is rounded to the nearest whole day, so input "=ROUND(365/C36,0)".Check your formulas and make sure that you are grouping numbers and/or variables together with parentheses as needed; remember the order of operations concept from algebra. Some of the cell formulas will include several sets of parentheses so make sure that you open and close each set. There should be the same number of "(" and ")". For example, the formula for the inventory turnover ratio is =ROUND(F8/((B10+C10)/2),2). You're welcome :) for that one. Also, notice how the average inventory balance is calculated in the formula for the inventory turnover ratio. You add the current and prior year balances together and divide by two as follows: ((current year cell + prior year cell) /2). Prominent candy company Sweetums and fast food chain Paunch Burger decide to team up and release a new child-sized drink that blends candy bars into milkshakes. Leslie Knope is interested in how this new milkshake affects the weight of the citizens of her town (Pawnee, Indiana). She decides to take a random sample of 41 people from the town and asks the people in the sample to replace one beverage a day with this new candy bar milkshake. She measures their weights (in kilograms) before and after drinking this milkshake for a week. The summary of the data is below.Variable Sample Mean Sample Standard DeviationWeight (After - Before) 3.51 7.44Use a significance level of = 0.01 to test the hypothesis that the mean weight of citizens in Pawnee significantly increased after drinking the new child-sized candy bar milkshake from Sweetums and Paunch Burger for a week. Assume that the necessary conditions hold to carry out this test.Select one:t = 2.293, p-value < 0.01, reject the null hypothesis, and conclude that the mean weight of the citizens has increased.t = 2.293, p-value < 0.01, reject the null hypothesis, and conclude that the mean weight of the citizens has changed.t = 3.021, p-value > 0.01, do not reject the null hypothesis, conclude that the mean weight of the citizens has stayed the same.t = 2.293, p-value > 0.01, do not reject the null hypothesis, conclude that the mean weight of the citizens has stayed the same.t = 3.021, p-value < 0.01, reject the null hypothesis, and conclude that the mean weight of the citizens has increased.To estimate the effect of the new child-sized candy bar milkshake, Leslie finds a 95% confidence interval for the mean difference in weight to be (1.163 , 5.857). ______ Is the notion that people are valuable strategic assets of any organization.A. HR practiceB. human resource managementC. Strategic human resource managementD. Talent management ARTS - Answer these 3 puppetry questions with the proper definitions.Question 1. In puppetry, what does the word articulate mean?a. bring an inanimate object aliveb. to speak in different voicesc. be able to move the mouth of the puppet in synchronicity with the puppeteers voiced. the movement of a puppet at a joint such as an elbowQuestion 2. What is a hand puppet? a. a puppet controlled by stringsb. puppet placed over the hand of the puppeteer that is manipulated by the puppeteerc. a puppet that needs rods and sticks to manipulate its jointsd. a puppet that must be operated by 2 puppeteersQuestion 3. What is a rod puppet?a. puppet controlled by stringsb. puppet that takes 2 people to operatec. a puppet with a rod or a stick that manipulates the head, body, hands or legs of the puppetd. a puppet where the audience only sees the shadow of the puppet Calculating Momentum Before and After Collision 18 Calculate the average time for the fives trials of each setup and record in Data Table 2. 19 Calculate the velocity of each marble using the average time for each setup and the equation below, and record in Data Table 2 using correct significant figures. d 20 Calculate the momentum of each marble for each setup using the equation below and record in Data Table 2 using correct significant figures. p=mv Note: The mass (m) used to calculate the momentum (p) must be measured in kg. To convert g to kg, use the conversion factor: 1 kg = 1000 g. 21 Repeat steps 7-20 for the remaining combinations of marbles (setups) listed in Data Table 2. 22 Calculate the total momentum (the sum of each marble's momentum) of each interaction before the collision and after the collision and record in Data Table 3. Note: Each interaction (setup) is designated by a letter in Data Table 3 corresponding to the setup letters in Data Table 2. 23 Calculate the percentage of momentum loss before and after the collision using the following equation and record in Data Table 3. Percent Loss = (initial momentum - final monemtum) x 100% initial momentum 24 Use graphing software to generate a graph of total momentum before the collision on the x axis and total momentum after the collision on the y axis for all the interactions listed in Data Table 3. Note: Include a line and the equation for the line on the graph. 25 Label the graph with title and x and y axis titles, including units, and upload an image of the graph to Graph 1. Trial 2 time (s) Trial 3 Trial 4 Trial 5 time (s) time (s) time (s) Average Velocity time (s) (m/s) Momentum (kg m/s) 2.60 3.10 3.05 5.98 3.51 0.01 0.03 0.97 0.76 0.90 0.94 0.90 0.09 0.40 0.94 0.89 0.61 0.53 0.77 0.10 0.44 3.25 3.58 3.25 3.35 3.40 0.01 0.03 Data Table 2: Velocity and Momentum Setup Marble Mass (g) Measured Trial 1 size distance time (s) (m) A. Small 4.05 0.036 2.83 Marble 1 Initial A. Small 4.05 0.087 0.93 Marble 2 Final A. Small 4.05 0.087 0.88 Marble 1 Final B. Small 4.05 0.355 3.57 Marble 1 Initial B. Medium 5.77 0.087 0.47 Marble 2 Final B. Small 4.05 0.089 0.66 Marble 1 Final C. Medium 5.77 0.355 1.80 Marble 1 Initial C Small 4.05 0.087 0.60 Marble 2 Final C. Medium 5.77 0.087 0.64 Marble 0.61 0.59 0.56 0.61 0.57 0.15 0.88 0.67 0.67 0.61 0.60 3.25 0.02 0.12 1.57 1.58 1.64 1.95 1.71 0.02 0.12 0.67 0.61 0.67 0.77 3.32 0.03 0.12 0.67 0.70 0.77 0.69 0.7 0.12 0.74 Experiment 2 Exercis Graph 1 5 Data Table 2 Data Table 3 Data Table 3: Total Momentum Setup Total momentum before A Total momentum after Percentage momentum loss B D E 3. Use the data in Data Table 2 to relate the momentum of the largest marble to the momentum of the smallest marble for a variety of circumstances. 1 U III T T, o Word(s) Small 4.05 0.035 3.53 3.40 3.81 3.60 4.57 3.80 0.01 0.04 Large 9 0.088 0.50 0.51 0.55 0.51 0.56 0.52 0.16 1.52 Small 4.05 .088 0.84 0.96 1.00 0.96 0.91 0.93 0.10 0.36 Trial D. Marble 1 Initial D. Marble 2 Final D. Marble 1 Final E Marble 1 Initial E. Marble 2 Final E. Marble 1 Final Large 9 0.035 1.30 1.30 1.25 1.23 1.21 1.25 0.02 0.19 Small 4.05 0.088 0.81 0.83 0.90 0.96 0.90 4.40 0.02 10.08 Large 9 0.088 0.53 0.61 0.55 0.60 0.52 0.55 0.16 1.44