Answer: [tex]2.49\ m^3[/tex]
Explanation:
Given
Mass of nitrogen present [tex]m=28\ g[/tex]
Temperature [tex]T=27^{\circ}C\equiv 300\ K[/tex]
Pressure [tex]P=785\ mm\ \text{of}\ Hg\ \text{or}\ 1.032\ atm[/tex]
The molar mass of Nitrogen [tex]M=28\ g/mol[/tex]
No of moles of nitrogen present
[tex]n=\dfrac{m}{M}\\\\n=\dfrac{28}{28}\\\\n=1[/tex]
Using [tex]PV=nRT[/tex]
[tex]\Rightarrow 1.032\times V=1\times 8.314\times 300\\\\\Rightarrow V=\dfrac{2494.2}{1.032}\\\\\Rightarrow V=2494.2\ L\ \text{or}\ 2.49\ m^3[/tex]
Select the TRUE statements below regarding the coordination compound prepared in lab. Group of answer choices The coordination compound contained a complex ion that was covalently bonded to sulfate. The ligand must have at least one unshared pair of valence electrons in order to covalently bond with transition metal in the coordination compound. Ethanol was used during crystallization of the coordination compound because the compound is soluble in ethanol. The ammonia is covalently bonded to the transition metal. The colors of many coordination compounds are the result of light absorption by the d electrons on the transition metal.
Answer: Hello the compound is missing but I was able to get the Full question and missing compound . ( compound = copper sulfate )
answer : statement ; 2 , 3 and 5
Explanation:
The true statements regarding the coordination compound ( copper sulfate ) are :
The ligand must have at least one unshared pair of valence electrons in order to covalently bond with transition metal in the coordination compound ( statement 2 )Ethanol was used during crystallization of the coordination compound because the compound is soluble in ethanol ( statement 3 ) The colors of many coordination compounds are the result of light absorption by the d electrons on the transition metal ( statement 5 )During the coordination of compounds dative bonds exits between the transition metals and the Ligands molecules
state the type of enthalpy in the followinv equation Koh+Hcl-kcl+h2o ∆h+=-57kj\mol
Answer:
The Enthalpy of neutralization
Explanation:
The reaction of a base (KOH) with an acid (HCl) produce water and its salt (KCl) is called Neutralization Reaction.
This neutralization releases 57kJ/mol.
As the type of enthalpy is due the type of reaction. This enthalpy is:
The Enthalpy of neutralizationPLEASE HURRY!!!
It took Mrs. Murphy 5.5 hours traveling at a rate of 113 km/hr to finally reach her parents house.
How far did she travel?
what is scienceand technogy
Answer:
Science and technology is an interdisciplinary topic encompassing science, technology, and their interactions: Science is a systematic enterprise that builds and organizes knowledge in the form of explanations and predictions about nature and the universe.
Explanation:
in the cell, newely made proteins move directly from the ribosomes into the rough _____ _____, where they are chemically modified
Answer:
endoplasmic reticulum
Explanation:
there it is
Object X carries a net negative charge. Danny touches object X and all of the excess negative charge leaves it. Danny effectively grounds object X by touching it.
Answer: B.) Object X Is A Conductor
Explanation: Since object X was able to lose all of its charge by being grounded, this means that its charges were able to move about freely. This strongly suggests that object X is a conductor. If object X had been an insulator, the ground would have had virtually no effect on its net charge.
_N₂+_H₂→ _NH₃
Balance equation
Answer:
N2+(3)H2=(2)NH3
explanation:
When 15. 3 g NaCl reacts with 81.70 g Pb(NO3)2, sodium chloride is the limiting reactant, according to the balanced equation below. How many grams of lead (II) nitrate will remain after the reaction stops?
2 NaCl + 1 Pb(NO3)2 → 2 NaNO3 + 1 PbCl2
Answer:
[tex]m_{Pb(NO_3)_2}^{leftover}=38.34g[/tex]
Explanation:
Hello there!
In this case, given the chemical reaction by which the sodium chloride reacts with lead (II) nitrate and the former is the limiting reactant, it is possible to calculate the mass of lead (II) nitrate that are actually consumed according to the 2:1 mole ratio between them:
[tex]m_{Pb(NO_3)_2}=15.3gNaCl*\frac{1molNaCl}{58.44gNaCl}*\frac{1molPb(NO_3)_2}{2molNaCl} *\frac{331.21gPb(NO_3)_2}{1molPb(NO_3)_2} \\\\m_{Pb(NO_3)_2}=43.36gPb(NO_3)_2[/tex]
Thus, the leftover of lead (II) nitrate is:
[tex]m_{Pb(NO_3)_2}^{leftover}=81.70g-43.36g\\\\m_{Pb(NO_3)_2}^{leftover}=38.34g[/tex]
Best regards!
Why are some chemical substances, like oil and coal, considered nonrenewable?
the process that forms them stops working after a decade
the process that forms them has not worked for millions of years
the process that forms them is very fast
the process that forms them is very slow
Answer:
The process of the formation of coal and oil is a very gradual and slow process.
Explanation:
The process of the formation of coal and oil is a very gradual process that takes up to millions of years.
What refers to the attractive forces that exist between molecules?
Describe the effects lenses have on light and their possible technological applications.
Answer:
lenses is used to refract light inward or outward
there are two type of lenses. Concave and convex lense
Convex lense converge ray of light
Concave lense diverge ray of light
useful application =:
=> camera
=> flashlight
=> lasers
=> Binoculars and Telescope
hope it helps
Answer:
Explanation:
Lenses are made of glass or other transparent materials for light. They are optically dense so light slows down on entering it. It is called refraction which bends the light on entering and leaving the lenses.
Refraction by lenses can be used for all kinds of optical applications, e.g. camera, telescope, magnifying glasses, solar heating.
a. Explain why the pie pans flew off the van de Graaf generator
b. Give a detailed explanation of why the rabbit fur and the plastic rod were attracted to each other after we rubbed them together but not before
c. Describe two things you could change to increase the force of electrical attraction between two objects (this is about Coluomb's Law).
Answer:
Static energy is an energy between two charges.
Explanation:
a). A van de Graff generator builds up a positive electric charge on the dome by separating the negative static electric charges from the positive static charge using a quickly moving belt. The positive charge collects on the large metal dome of the generator. When the charge builds up is large enough, a lighting like spark can shoot from the dome to a grounded discharge rod.
Like electric charges always repel each other, and oppositely electric charges will attract each other. When the aluminum pans are being charged by the van de Graff generator, then each of them attain the same positive polarity similar with the dome. Thus, positive charge starts to accumulate over the surface of each of the pie pan. Each aluminum pan repels the others. These repulsive forces between the pans are so strong that they succeed in overcoming the gravity force and thus the top of the pan is pushed away from the generator's dome.
b). Static electricity is produced by a concentration of negative and positive electric charges. Like charges pushes away each other while unlike charges pulls each other.
Objects generally have same numbers of positive charges as well as negative charges. And if there is any small imbalance in numbers of the charges on the object, it is charged.
Negative charges easily torn away from the materials like the fur or hair. Also, the negative charges are held on other materials like the plastics. If we rub a plastic rod with fur, the negative charges will get transferred from fur to rod. The rod gets negatively charged and the fur is positively charged. As a result, the rabbit fur and the plastic rod were attracted to each other.
c). Coulomb's law stated that :
[tex]$F=\frac{KQ_1Q_2}{d^2}$[/tex] .............(i)
where, [tex]$Q_1$[/tex] and [tex]$Q_2$[/tex] are the charges of two objects d is the distance between two objects.
As from the above equation, we can say that force of electrical attraction between two objects depends on the charges and the distance between objects.
1. The electrical force between two charged object is inversely proportional to the distance of separation between two objects.
Decreasing separation distance (d) between the objects will increase its attraction force.
2. And, increasing the charges of two objects(+ve and -ve) increases the force of attraction between two objects.
1. A bird perching in the tree hears the chirping of another bird. A whale hears
the songlike sound made by another whale swimming pcar it. Which sound
travels faster, the bird's chirping or the whale's singing? Explain your answer.
Answer:
The sound from the whales singing is faster than that from the birds chirping.
Explanation:
The sound from the whales singing will travel faster than the sound from the birds chirping because sound travels faster through a medium than through air.
In this case the whales are in water which is a medium while the birds are in the air and thus, the sound from the water will travel faster.
Match each definition to the appropriate term.
1. The extent of randomness in a system _______________
2. Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature ____________
3. Solution in which no more solute can be dissolved in the solvent _____________
4. Sum of the internal energy plus the product of the pressure and volume for a reaction _____________
5. The condition that a reaction takes place without outside help ____________
a. Spontaneity
b. Saturated solution
c. Entropy
d. Enthalpy
Answer:
The definition of the terms are:
1.) The extent of randomness in a system ENTROPY.
2.) Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature is GIBBS FREE ENERGY.
3.) Solution in which no more solute can be dissolved in the solvent SATURATED SOLUTION.
4.)Sum of the internal energy plus the product of the pressure and volume for a reaction ENTHALPY.
5.) The condition that a reaction takes place without outside help SPONTANEITY.
Explanation:
ENTROPY is defined as the degree of disorderliness(randomness) of a system. It is usually denoted by 'S'. Entropy change is a factor that contributes to the driving force behind Chemical reactions. In a system, the greater the degree of disorderliness the higher the entropy and the greater the tendency for the reaction to take place. Therefore the extent of randomness in a system is ENTROPY.
GIBBS FREE ENERGY is defined as the difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature. Both the enthalpy (H) and entropy (S) can determine how a chemical reaction will occur.A scientist J. Willard Gibbs related the two by introducing a third parameter called the FREE ENERGY. This is usually represented as (G). Mathematically,
∆ G = ∆H - T∆S
Where T is the absolute temperature of the system.
When ∆G is negative the reaction is feasible, that is, it will occur. When ∆G is positive the reaction is not likely to occur. When it is zero the reaction is at equilibrium.
SATURATED SOLUTION is defined as a solution in which no more solute can be dissolved in the solvent. This means that it's a solution that contains as much solute as it can dissolve at that temperature in the presence of undissolved solute particles. In a saturated solution, the dissolved solutes and undissolved solutes are in equilibrium at that temperature. Any change in temperature will disturb this equilibrium and the system must alter to counter the change.
ENTHALPY is defined as the Sum of the internal energy (E) plus the product of the pressure(P) and volume(V) for a reaction. This is usually represented with the symbol 'H'. Mathematically,
H = E + PV.
The rate of chemical reaction depends on the frequency of effective collision between the reacting particles. When this occurs,the colliding particles becomes activated with increased kinetic energy. This energy must exceed a particular energy barrier called activation energy ( an internal energy) before a reaction can take place while the heat of the reaction is called ENTHALPY (H).
SPONTANEITY is the condition that a reaction takes place without outside help. This reaction doesn't require any energy input because the products at a more stable lower energy state than the reactants.
The Haber process generates ammonia from nitrogen and
hydrogen gas through the following chemical equation.
N2 + 3H2 + 2NH3
Which is the excess reagent in the Haber reaction if equal
moles of Hydrogen and Nitrogen are used?
The Haber process generates ammonia from nitrogen and hydrogen gas, and nitrogen gas is the excess reagent.
What is stoichiometry?Stoichiometry of reaction tells about the relative amount of reactants and products after and before the chemical reaction.
Given chemical reaction is:
N₂ + 3H₂ → 2NH₃
From the stoichiometry of the reaction it is given that:
1 mole of N₂ = produce 2 moles of NH₃
3 moles of H₂ = produce 2 moles of NH₃
1 moles of H₂ = produce 2/3=0.66 moles of NH₃
So, nitrogen is present in the excess quantity.
Hence, nitrogen gas is the excess reagent.
To know more about stoichiometry, visit the below link":
https://brainly.com/question/16060199
Answer:
Its N2
Explanation:
yea lol
BTw this is for Ck-12
9. A student is dissolving sugar in water. What can
the student do to make the sugar dissolve faster?
A. Nothing, sugar will not dissolve in water
B. Add more water.
C. Add ice to the water.
D. Stir the solution.
Answer:
D
Explanation:
Sugar will dissolve faster when you stir the solution quickly because the act of stirring increases kinetic energy which increases the temperature.
In the graph above, what is the relationship between volume and temperature? Does this data support Charles' Law?
Hint: is it a direct or inverse relationship? How does volume change with temperature changes?
Answer:
No the graph does not support Charles' Law. Both volume and temperature increase so it would be a direct relationship.
Explanation:
When optically active (S)-2-methylcyclopentanone is treated with aqueous base, the compound loses its optical activity. Explain this observation and draw a mechanism that shows how racemization occurs. For the mechanism, draw the curved arrows as needed. Include lone pairs and charges in your answer. Do not draw out any hydrogen explicitly in your products. Do not use abbreviations such as Me or Ph. Collapse question part 21.55a Get help answering Molecular Drawing questions Get help answering Molecular Drawing questions. Draw (S)-2-methylcyclopentanone.
Answer:
See explanation and image attached
Explanation:
The first step in the reaction is the attack of the hydroxide ion from the base abstracting a proton from (S)-2-methylcyclopentanone.
The abstraction of a proton from water by the substrate yields the enol form in equilibrium with the keto form.
The product formed is racemic hence the optical activity of (S)-2-methylcyclopentanone is lost.
What will change more solid NiCl2 is added
which objects could you stand near to feel the heat
Answer:
An heater, Oven, sun, and fireplaces
Chose which ever you want
what element in magma is most abundant
Answer:
Oxygen and Silicon
Explanation:
Oxygen and Silicon are the most abundant elements in magma, SiO₂
-TheUnknownScientist
hsvsusvshssveuevsjsvsjdvsudvysvwkwhsjwvsgsbkwbsywvejwvsh
Sorry, I won't understand your words.
Please help me on 6 and 8 thanks
Answer:
6.) 3, 12, 1, and 4 8.) 4, 1, and 3
Explanation:
By multiplying subscripts inside and outside of the parentheses you can count the number of atoms that are present. I recently answered a question for you and I did the math wrong I am going to go back and comment so you know which one and I will correct my errors. Sorry for the inconvenience!
the number of atoms in number 6:
N: 3
H: 12
P: 1
O: 4
the number of atoms for number 8:
Ca: 4
C: 1
O: 3
hope I clarified my mistake and helped you! :)
22. Radon has a half-life of 3.83 days. How long will it take a 225 g sample to decay to 14.06 g? (3pts.)
What’s the answer
Answer:
15.32 days
Explanation:
From the question given above, the following data were obtained:
Half-life (t½) = 3.83 days
Original amount (N₀) = 225 g
Amount remaining (N) = 14.06 g
Time (t) =.?
Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:
Original amount (N₀) = 225 g
Amount remaining (N) = 14.06 g
Number of half-lives (n) =?
N = N₀ / 2ⁿ
14.06 = 225 / 2ⁿ
Cross multiply
14.06 × 2ⁿ = 225
Divide both side by 14.06
2ⁿ = 225 / 14.06
2ⁿ = 16
Express 16 in index form with 2 as the base
2ⁿ = 2⁴
n = 4
Thus, 4 half-lives has elapsed.
Finally, we shall determine the time. This can be obtained as follow:
Half-life (t½) = 3.83 days
Number of half-lives (n) = 4
Time (t) =.?
n = t / t½
4 = t / 3.83
Cross multiply
t = 4 × 3.83
t = 15.32 days
Therefore the time for 225 g sample of Radon to decay to 14.06 g is 15.32 days
t-Butyl alcohol was produced by the liquid-phase hydration (using water, W) of isobutene (I) over an Amberlyst-15 catalyst.
a. True
b. False
Answer:
True
Explanation:
This is because, The hydroboration oxidation of an alkene which is isobutene in the presence of a catalyst will result to alcohol as the product . Therefore, the OH group will attach or link itself to the carbon which is less obstructed. Thus this reaction is in accordance to Anti-Markownikoff's rule.
So isobutene on hydroboration oxidation will produce ter isobutyl alcohol.
Balance the equation K2SO4 + SrL2 =
iiiluuiijjuulluuuuuuuuullffffff
Answer:
According to who knows who I believe the answer is k2So4 + SrI2 ---> SrSo4 +2KI
S, 2. S, 2
K, 2. K, 2
I, 2. I, 2
O, 4. O, 4
Pumba
Q Zoom
From left to right on the figure, which is the order during a
lunar eclipse?
A
the Sun, the Moon, the Earth
B
Earth, the Moon, the Sun
С
Earth, the Sun, the Moon
D
the Sun, Earth, the Moon
which statement is not a postulate of the kinetic molecular theory g the volume of the gas molecules is comparable to the volume of the container?
Answer:
The pressure and volume of a gas are inversely related
Explanation:
If we look at all the options stated; we will notice that all the statements are correct according to the kinetic theory of gases; except the statement "The pressure and volume of a gas are inversely related".
Recall that the inverse relationship between pressure and volume of a gas is captured by Boyle's law and not the kinetic molecular theory. Hence this statement is not part of the kinetic molecular theory.
If 7.4 moles of carbon dioxide is produced in this reaction, how many moles of oxygen gas would be needed?
1 C7H16 + 11 O2 = 7 CO2 + 8 H2O
Answer:
11.6 mol O₂
Explanation:
C₇H₁₆ + 11 O₂ → 7 CO₂ + 8 H₂OIn order to solve this problem we need to convert moles of carbon dioxide (CO₂) into moles of oxygen gas (O₂). To do so we'll use a conversion factor containing the stoichiometric coefficients of the balanced reaction:
7.4 mol CO₂ * [tex]\frac{11molO_2}{7molCO_2}[/tex] = 11.6 mol O₂A 1.00 x 10^-10 M solution of chloric acid Please help me solve this to find pH and pOH
Answer: The pH of solution is 10.
The pOH of the solution is 4.
Explanation:
pH is the negative logarithm of concentration of hydrogen ion.
As given concentration of acidic solution is [tex]1.00 \times 10^{-10} M[/tex]. Therefore, pH of the solution is calculated as follows.
[tex]pH = -log [H^{+}]\\= -log (1.00 \times 10^{-10})\\= 10[/tex]
The relation between pH and pOH is as follows.
pH + pOH = 14
pOH = 14 - pH
= 14 - 10
= 4
Thus, we an conclude that pH of solution is 10 and pOH of the solution is 4.