Answer:
Molarity of a solution where one mole of NaOH is added to 2000mL of water is 0.0005
Explanation:
Molarity is the equal to number of moles of solute divided by total volume of solvent
Given -
Number of moles of solute i.e NaOH = 1
Total volume of solvent i.e water = 2000 mL
Molarity [tex]\frac{1}{2000} = 0.0005[/tex]
why are metals good conducts of heat??????
Materials that are good conductors of thermal energy are called thermal conductors. Metals are especially good thermal conductors because they have freely moving electrons that can transfer thermal energy quickly and easily
Answer:
Explanation:
Materials that are good conductors of thermal energy are called thermal conductors. Metals are especially good thermal conductors because they have freely moving electrons that can transfer thermal energy quickly and easily.1
What type of bond would be formed between nitrogen (N) and nitrogen (N)? Why?
an ionic bond because there is less than a 0.4 difference in electronegativity between the atoms
a polar covalent bond because there is less than a 0.4 difference in electronegativity between the atoms
a nonpolar covalent bond because there is less than a 0.4 difference in electronegativity between the atoms
Answer: The compound formed between nitrogen (N) and nitrogen (N) a polar covalent bond because there is less than a 0.4 difference in electronegativity between the atoms.
Explanation:
If electronegativity difference between two atoms is less than 0.4 then bond formed is a pure covalent bond.
If electronegativity difference between two atoms is between 0.4 to 1.8 then bond formed is a polar covalent bond.
If electronegativity difference between two atoms is greater than 1.8 then bond formed is an ionic bond.
The electronegativity value of a nitrogen atom is 3.04. Hence, the electronegativity difference of [tex]N_{2}[/tex] molecule is as follows.
[tex]Electronegativity difference = electronegativity value of N - electronegativity value of N\\= 3.04 - 3.04\\= 0[/tex]As the electronegativity difference is 0 which is less than 0.4.
Hence, we can conclude that the compound formed between nitrogen (N) and nitrogen (N) a polar covalent bond because there is less than a 0.4 difference in electronegativity between the atoms.
Pls answer I am giving lots of points and need all the work shown. Determine the kb for chloroform when 0.793 moles of solute in 0.758 kg changes the boiling point by 3.80 °C.
Answer:0.87
Explanation:
What is the theoretical oxygen demand in liters of air for a 50 mg / L acetone solution, CH3COCH3, to decompose completely?
Answer:
18.368 Liters
Explanation:
Given that balanced Acetone oxidation,
= C3H6O + 4O2 = 3CO2 + 3H2O
lets assume volume of acetone = 1 liter
mass of acetone = 50 mg
number of moles present = (5*10^-3)g / ( 58.08 ) = 0.0000861 mol
Given that : I mol of ( acetone ) = 4 mol of oxygen
∴0.0000861 mol of acetone = 0.0003444 mol of oxygen
also note that the ratio of air to oxygen is
0.21 mol of oxygen = 1 mol of air
∴ 0.0003444 mol of oxygen = 0.00164 mol of air (0.0003444 / 0.21 )
note : 1 mol at STP = 22.4 L (at STP = Temperature = O°C
Finally the theoretically oxygen demand in liters of air for a 50 mg/L of acetone to decompose
Given that Acetone decompose/degrade completely between 500°C - 600°
we will take 500° for the sake of this calculation
The oxygen demand in liters will be
= 22.4 * 0.00164 * 500 = 18.368 Liters
The theoretical oxygen demand in liters of air for a 50 mg / L acetone solution, to decompose completely is 18.368 Liters.
How we calculate moles?Moles of any substance will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given chemical reaction is:
CH₃COCH₃ + 4O₂ → 3CO₂ + 3H₂O
Given mass of acetone = 50mg = 0.05g
Moles of acetone = 0.05g / 58.08g/mol = 0.0000861 mole
From the stoichiometry of the reaction, it is clear that:
1 mole of CH₃COCH₃ = 4 moles of O₂
0.0000861 mole of CH₃COCH₃ = 4×0.0000861=0.0003444 moles of O₂
We know that ratio of air is:
0.21 mole of oxygen present = in 1 mole of air
0.0003444 mole of oxygen present = in 0.0003444/0.21=0.00164 mole of air
At STP 1 mole of gas is present in 22.4 Liter.
Degradation of acetone takes place in 500°C - 600°C.
Theoretical oxygen demand = 22.4×0.00164×500 = 18.368 Liters
Hence, theoretical oxygen demand is 18.368 Liters.
To know more about theoretical oxygen demand, visit the below link:
https://brainly.com/question/13251445
please help!!
i’m trying to go to sleep
Answer:
4) C
6) true
I am not sure about 5th one
4) evaporation rate
5) acetone
6) true
formula of velocity rate
Answer:
V=d/t
,,,,,,,,,,,,,,,,,
What is a subcript? Give an example.
Answer:
subscript is a character
Explanation:
A subscript is a character (such as a number or letter) that is set slightly below or above the normal line of type, respectively. It is usually smaller than the rest of the text.
2. If you have 100 graham crackers, unlimited chocolate, and only five marshmallows, how many S’mores can you make? Show calculations.
Answer:
I'm pretty sure it's only 5, because once you've used up all 5 marshmallows, you can't make any more s'mores. Unless just graham crackers and chocolate counts as a s'more...
:)
PLS HELP
A 20.8 gram piece of metal at 184.9 oC is dropped into 87.7 grams of water at 19.2 oC. The water temperature rose to 54.6 oC. Calculate the specific heat of metal in J/g oC. (round to the tenths place) (DO NOT PUT UNITS IN YOUR ANSWER.)
Assume that all of the heat lost by the metal is transferred to the water and no heat is lost to the surroundings. The specific heat of water is 4.184 J / g oC.
Answer:
Explanation:
A 12.48 g sample of an unknown metal, heated to 99.0 °C was then plunged into 50.0 mL of 25.0 °C water. The temperature of the water rose to 28.1 Go to calculating final temperature when mixing two samples of water ... Problem #1: A 610. g piece of copper tubing is heated to 95.3 °C and placed in an ... The two rings are heated to 65.4 °C and dropped into 12.4 mL of water at 22.3 °C. ... Problem #4: A 5.00 g sample of aluminum (specific heat capacity = 0.89 J g¯1
The gas in an aerosol can is at a pressure of 3.16 atm at 32.2°C. What would the gas pressure in the can be at 22.9°C?
Answer:
The pressure of the gas would be 3.06 atm
Explanation:
Amonton's law states that the pressure is directly proportional to the absolute temperature of a gas under constant volume. The equation is:
P1 / T1 = P2 / T2
Where P1 is the initial pressure = 3.16atm
T1 is initial absolute temperature = 273.15 + 32.2°C = 305.35K
P2 is our incognite
And T2 is = 273.15 + 22.9°C = 296.05K
Replacing:
3.16atm / 305.35K = P2 / 296.05K
3.06 atm = P2
The pressure of the gas would be 3.06 atmThe diagram below represents the bone
arrangements in the front limbs of three different
species of mammals.
The similarities and differences in these limbs
suggest that all three species developed from the
same ancestor, but
Answer:
these species share a common ancestor
Explanation:
C=C + H-H —> C-H + C-H
Answer:
What is that supose to mean?
Answer:
I would never think that would be even a real question....what does it mean? what math problem is this?! I've never seen this in my life...does it mean... CCHHCHCH? *laughs nervously*
Explanation:
Have a Blessed Day.
Perform the following operation and express the answer in scientific notation. 7.0x10^3 x 1.1x10^7
Answer:
The answer is 7.7 ×10¹⁰
Explanation:
7.0 × 10³ × 1.1 × 10⁷
7.7 ×10¹⁰
Thus, The answer is 7.7 ×10¹⁰
-TheUnknownScientist
How many formula units are there in 7.55 moles potassium chloride?
Answer:
mole is equal to 1 moles Potassium Chloride, or 74.5513 grams.
SOMEONE HELP PLEASE !!
Which is not an electrolyte
1. Ionic salt
2. Acid
3. Base
4. Water
PLEASE HELP ME
salt is not because it gets u dehydrated
Hydroelectric requires this force to increase the mechanical energy gathered.
Combustive
Velocity
Gravitational
Thermal
unknown substance's mass: 75.0g, unknown substances molar mass = 150.0 g/mol, Hfus = 5.0x10^3 J/mol, Hvap = 1.00 x 10^4 J/mol, unknown substance's specific heat (liquid) = 2.2 J/g, unknown substance's specific heat (gas) = 4.8 J/g, unknown substances's specific heat (solid) = 5.0 J/g; Calculate the amount of heat (in J) for the unkown sample as it is heated at a constant rate from 10.0c to 25.0c as it passes through each of the following regions: region uv
Answer:
kkajqjjqjqjnqnqnqjqjq
HELP!!! WILL MARK BRAINLIEST!!!
picture attached below
Answer:
0.2 cm
Explanation:
looking at the ruler, you can see that the diameter is 0.4 cm. to get the radius, just divide by two, which gets 0.2 cm as the radius
why can lime juice remove rust stain
Answer:
El limon por su alto contenido en ácido cítrico, actúa como un excelente limpiador natural debido a su bajo pH y propiedades antibacterianas. A parte de todas estas propiedades, los limones huelen muy bien y es una rareza que pudiesen manchar o dañar algún material de la casa.
Explanation:
Answer:
It's the citric acid reacting to the iron oxide -which is basically the rust- it dissolves.
Explanation:
Is silicon(IV) oxide the same as silicon dioxide
Answer:
Yes, it is
Explanation:
Silicon (IV) oxide, commonly known as silica is a substance that majorly constitutes SAND. It has the chemical formula, SiO2, which contains a combination of silicon and oxygen.
The IUPAC name of SiO2 is Silicon IV oxide, which can also be referred to as Silicon dioxide because the structure the compound contains two (-di) oxygen atoms. Hence, based on the question, silicon(IV) oxide is the same as silicon dioxide.
HELP ME PLEASE WILL GIVE BRAINLY NO BAD ANSWERS
Answer:
7.17
Explanation:
convert 5.50g to moles of salicylic acid. Then use mole ratios and convert the moles of salicylic acid to moles of Asprin(mole ratio is 1:1). Then convert the moles to grams using the molar mass of asprin.
Valerie creates a model using three different rocks. The rocks are classified as igneous, metamorphic, and sedimentary.
Which property does Valerie use for classification purposes?
color
formation
shape
texture
The rocks are classified as igneous, metamorphic, and sedimentary use the formation for classification purposes.
What are the 3 types of rocks existing on earth?The outermost of them, called the crust, is composed of three types of rocks: magmatic, sedimentary and metamorphic. They are defined through the origin of several minerals and can be characterized with chemical composition, texture or shape, but the most used specification is based on composition.
The property does Valerie use for classification purposes is formation.
See more about rocks at brainly.com/question/19930528
#SPJ5
What are the products of the following neutralization reaction? (No need to balance)
H3PO4 + Ba(OH)2 --> ??? + ???
A.)H2O + Ba3(PO4)2
B.)H30+ + BaPO4
C.)H30+ + Ba3(PO4)2
D.)H2O + BaPO4
H3PO4 + Ba(OH)2 --> Ba3(PO4)2 + H2O
so, (A) H2O + Ba3(PO4)2 is your answer.
Somebody look at all the science questions i posted plzzz help ( i will give brainliest
Answer:
ok
Explanation:
Which of these is the BEST definition of "civilization" for a history class? A) the way people talk B) a group that has a culture C) the ability to walk upright D) how sophisticated people behave
Answer:
Is C
Explanation:
The Balanced equation for the combustion of ethene is given below. If 97.7 g of oxygen is used, how much heat energy will be produced?
Answer:
the answer is d. 74.02
Explanation:
When ogyen all together with the different things to get this.
. What is the molarity of 5.30 moles of NaCl dissolved in 0.400 L of solution?
Answer:
13.25 M
Explanation:
Molarity is moles over liters so simply plug your values in as such:
5.30 mol ÷ 0.400 L = 13.25 M
Wat two common uses for Zinc???
Answer:
Zinc oxide is used in the manufacture of many products such as paints, rubber, cosmetics, pharmaceuticals, plastics, inks, soaps, batteries, textiles and electrical equipment.
Explanation:
Which two radioisotopes have the same decay mode?
A)220Fr and 60C0
B)37K and 42K
C)37Ca and 53Fe
D)99Tc and 19Ne
Answer:
c
Explanation:
37Ca and 53Fe have the same decay mode.
What are the three common modes of radioactive decay?Three of the most common types of decay are alpha decay (α-decay), beta decay (β-decay), and gamma decay (γ-decay), all of which involve emitting one or more particles.
Which isotopes are most likely to decay?The most likely mode of decay for a neutron-rich nucleus is one that converts a neutron into a proton. Every neutron-rich radioactive isotope with an atomic number smaller than 83 decays by electron emission. C, 32P, and 35S, for example, are all neutron-rich nuclei that decay by the emission of an electron.
Learn more about radioisotopes here https://brainly.com/question/18640165
#SPJ2
Ca(NO3)2 wht is the mass
Answer:
164.088 g/mol
Explanation: hope this helps
Answer:
Calcium nitrate
Explanation:
164.088 g/mol
give me the brainliest plss