Answer:
[tex]\implies \sf D = \dfrac{PM}{RT}[/tex]
[tex]\implies \sf 3.35= \dfrac{1 \times M}{ \frac{1}{12} \times 298}[/tex]
[tex]\implies \sf 3.35= \dfrac{12\times M}{ 298}[/tex]
[tex]\implies \sf 3.35 \times 298= 12\times M[/tex]
[tex]\implies \sf 998.3= 12\times M[/tex]
[tex]\implies \sf M = \dfrac{998.3}{12} [/tex]
[tex]\implies \bf M = 83.1917 \: \frac{g}{mol} [/tex]
A strip of zinc metal was placed in a beaker that contained 120 mL of a solution of copper (II) nitrate, Cu(NO3)2(aq). The mass of the copper produced was 0.813 g. Find the initial concentration of the solution of copper (II) nitrate.
Answer:
molarity 0.1
Explanation:
mass of copper nitrate =2.4
no of moles exist in 120ml= 2.4/187.5=0.0128mole
molarity =.0.0128/.12=0.1m
T’Keyah puts salt in ice water and then in boiling water to see which will dissolve faster.Which dissolving rate factor is she testing in these tests?
Answer:
temperature
Explanation:
its in the book
Answer: agitation
Explanation:
Water (H2O) is a liquid at room temperature, while carbon dioxide (CO2) is a gas at room temperature. Why? Choose the two statements that apply.
Water has relatively strong hydrogen bonds holding the molecules together but CO2 has only dispersion forces acting as intermolecular forces. The weaker intermolecular forces explains why CO2 is a gas whereas H2O is a liquid at room temperature
what is the formula for cadmium (ii) chlorate?
Answer:
a chemical compound
Explanation:
copper(ii) chlorate is a chemical compound of the transition metal copper and the chlorate anion with basic formula cu(cio)3 and 2
What will the particles in the tube do when the current is turned on?
Be + O2 --> BeO
Balance this and what's the type of reaction?
Answer:
2Be + O2 = 2BeO
its a synthesis
Explanation:
Write the symbol for the atom with 38 protons, 36 electrons, and 50 neutrons and identify the element.
Answer:
Symbol: Sr2+
Element: Strontium
Explanation:
Strontium will have 38 protons, 38 electrons, and the neutron will depend on the isotope but there will usually be 48, 49, or 50 neutrons
Hope this Helps
write a molecular, ionic, and net ionic equation for the reaction between solid magnesium carbonate and sulfuric acid.
Answer:
How to Write the Net Ionic Equation for H2SO4 + MgCO3 = MgSO4 + H2O + CO2 -
A net ionic equation also contains the spectator ions, whereas a net ionic equation just displays the chemical species that are involved in a process.
what is Net ionic equation?The net-ionic equation is a chemical equation that is used to express the condensed chemical reaction for a reaction that takes place in an aqueous solution. The ions involved in the production of a precipitate, water, or molecule are illustrated by the net-ionic equation. For precipitation, oxidation-reduction, and neutralization processes, net-ionic equations are frequently written.H₂SO₄ (aq) + MgCO₃ (s) →H₂O (l) + CO₂(g) + MgSO₄(aq)
An ionic equation is a chemical equation in which the electrolytes in aqueous solution are stated as dissociated ions. It is similar to a molecular equation in which substances are described as molecules.Learn more about the Net ionic equation with the help of the given link:
https://brainly.com/question/22885959
#SPJ2
1. Determine how many atoms are present in 2.5 moles of Silicon? (15.05 x 1023 atoms)
X
To solve this, we have to turn the moles into atoms:
2.5 moles/1 x 6.022x10^23 atoms/1 mole = 15.05 x 10^23 atoms
Answer: 15.05 x 10^23 atoms
I hope this helps!
Silicon is the eighth most abundant element in the Universe. There will be 15.05 * 10²³ atoms in the silicon.
What is number of moles?Silicon is the eighth most abundant element in the Universe; it is made in stars with a mass of eight or more Earth suns.
Near the end of their lives these stars enter the carbon burning phase, adding helium nuclei to carbon to produce oxygen, neon, magnesium and silicon.
1 mole contains 6.022x10²³ atoms.
2.5 mole contains = x atoms.
x= 2.5 moles/ 6.022x10²³ atoms.
= 15.05 x 10²³ atoms
Therefore, Silicon is the eighth most abundant element in the Universe. There will be 15.05 * 10²³ atoms in the silicon.
To learn more about silicon, refer to the link:
https://brainly.com/question/15412188
#SPJ2
When a substance changes from a solid to a liquid, is a new substance made?
Answer:
no
Explanation:
it means melting or fusion so yhe answer is no
A substance changes from a solid to a liquid no its is not the formation of new substance. It is the change of state of the matter.
What are the states of matter?The states of matter can be defined as one of the several configurations in which matter can exist.
There are basically three states of matter.
Solid - It is defined as hard, distinct in volume and shape. Atoms and molecules are joined together to form solids.Liquid - It is defined as defined volume with the ability to flow and change shape. Atoms and molecules are only weakly bound together in liquids.Gases - It is defined as no clear shape or volume.Thus, a substance changes from a solid to a liquid no its is not the formation of new substance. It is the change of state of the matter.
To learn more about states of matter, refer to the link below:
https://brainly.com/question/9402776
#SPJ2
elements in the second group are also very reactive. they are called:
Answer:
Explanation:
IIA elements in the periodic table are the alkali earth metals
Could someone take a picture of an acid or a base and label them
Answer:
Ok
Explanation:
Refer to the following balanced equation in which ammonia
reacts with nitrogen monoxide to produce nitrogen and
water.
4NH3(g) + 6NO(g) → 5N2(8) + 6H2O(l)
How many moles of NO are required to completely react with
2.45 mol NH3 ?
4NH₃(g) + 6NO(g) → 5N₂(8) + 6H₂O(l)
The mole ratio of NO to NH₃ based on the balanced equation is 6 to 4 (or 3 to 2 in the simplest form)
Therefore in the reaction, there are ³/₂ more moles of NO than NH₃.
⇒ since moles of NH₃ = 2.45 mol
then moles of NO = 2.45 mol × ³/₂
= 3.675 mol
How many moles of atoms are in 3.00 g of 13^C?
Answer:
1) 1.39 * 10²³ atoms
Explanation:
a. What are the half-reactions for the redox reaction CuCl2 + Zn → ZnCl2 + Cu? Label the oxidation
reaction and the reduction reaction. (1 point)
PLS HELP 100 points
The oxidation half equation is Zn ------> Zn^2+ + 2e while the reduction half equation is Cu^2+ + 2e------> Cu.
A redox reaction is a reaction in which there is a loss/gain of electrons. The specie that gives out electrons experiences an increase in oxidation number while the specie that gains the electrons experiences a decrease in oxidation number.
For the reaction; CuCl2 + Zn → ZnCl2 + Cu
The oxidation half equation is;
Zn ------> Zn^2+ + 2e
The reduction half equation is;
Cu^2+ + 2e------> Cu
The chloride ion is excluded because its oxidation number does not change from left to right in the reaction.
Learn more: https://brainly.com/question/967776
What is the IUPAC name for N2O? mononitrogen dioxide dinitrogen monoxide nitrogen oxide nitrous oxide.
The IUPAC name for N2O is nitrous oxide.
The IUPAC name with the full meaning (International Union of Pure and Applied Chemistry) is a system of naming chemical compounds by chemical scientists.
The given IUPAC name to N2O is nitrous oxide. Nitrous oxide is commonly known as the laughing gas is a colorless gas with a pleasant, sweetish odor and taste that, when breathed, causes placidity to pain.
Nitrous oxide has several medicinal applications due to its anesthetic and pain-relieving properties, and it can be given by Medical professionals.
Learn more about the IUPAC system of nomenclature here:
https://brainly.com/question/13517857?referrer=searchResults
What is the IUPAC name for N2O?
B. dinitrogen monoxide
What is the common name for N2O?
D. nitrous oxide
NO LINKS PLEASE!!!
Which picture correctly shows the path of the reflected light ray?
Select one:
a. A
b. B
c. C
d. D
The picture that correctly shows the path of the reflected light ray is: Picture A.
A ray diagram can be defined as the graphical representation of the possible paths that a light wave takes from one point (source) to another.
Basically, some of the phenomenon and properties associated with light ray include the following:
RefractionDiffractionInterferenceReflectionA reflected light ray completely bounces off a surface and as such, light wave do not pass through the surface as illustrated in Picture A.
Read more on reflected light here: https://brainly.com/question/14320820
What volume does 0.25 moles of oxygen gas occupy at STP ?
Answer:
[tex]\boxed {\boxed {\sf 5.6 \ L \ O_2}}[/tex]
Explanation:
We are asked to find the volume of 0.25 moles of oxygen gas.
At standard temperature and pressure or STP, one mole of any gas has a volume of 22.4 liters.
We want to convert 0.25 moles of oxygen gas or O₂ to liters. We will use dimensional analysis, so we must set up a conversion factor.
[tex]\frac {22.4 \ L \ O_2}{1 \ mol \ O_2}[/tex]
We are converting 0.25 moles of oxygen gas, so we multiply the conversion factor by this value.
[tex]0.25 \ mol \ O_2 *\frac {22.4 \ L \ O_2}{1 \ mol \ O_2}[/tex]
The units of moles of oxygen gas cancel.
[tex]0.25 *\frac {22.4 \ L \ O_2}{1 }}[/tex]
[tex]0.25 * 22.4 \ L \ O_2[/tex]
[tex]5.6 \ L \ O_2[/tex]
0.25 moles of oxygen gas occupy 5.6 liters at standard temperature and pressure.
What is the chemical formula for ammonium carbonate?
can you write the answer for lot of points
[tex]\\ \sf\longmapsto Work=Force\times Displacement [/tex]
[tex]\\ \sf\longmapsto Force=\dfrac{Work}{Displacement}[/tex]
[tex]\\ \sf\longmapsto Force=\dfrac{2400}{6}[/tex]
[tex]\\ \sf\longmapsto Force=400N[/tex]
whats the formula for lithium nitride
Answer:
Lithium nitride. Trilithium nitride. 26134-62-3. Lithium nitride (Li3N) Li3N.
Please help? It’s for chem
Answer:
O-H
Explanation:
It is polar covalent bond, because the hydrogen atom has electronegativity about 2.6, and the oxygen atom, electronegativity about 3.6. When the difference in electronegativity of the atoms is between 0.4 and 1.7, the result is a polar covalent bond.
Explain how magnesium is produced at the negative electrode in experiment 1.
The liquified (/molten) MgCl₂ dissociates into Mg²⁺ and Cl⁻ ions;
The Cl⁻ ions are drawn to the positive electrode (which has a deficit of electrons) where they deposit electrons since they are negatively charged;
This yields Cl atoms (these will form Cl₂ gas by covalent bonding and bubbles will be seen as this gas rises out of the liquid and it will enter the air);
These electrons will flow from the positive electrode to the negative electrode;
The Mg²⁺ ions, conversely, will be drawn to the negative electrode or cathode (which has a surplus of electrons partly from those the Cl⁻ ions lose) where they pick up electrons since they have a positive charge;
This yields pure magnesium.
The magnesium has been produced with the application of electric current for the production of ions that accumulate at the electrodes.
The setup has been for the electrochemical process. The sample in the molten state has been applied with the electric current. The current results in the dissociation of the sample into ionic constituents.
The opposite charge attracts negative charge. Thus, the negative ion moves towards the positive electrode, and negative ion move towards the positive electrode. The accumulation of ions has been obtained from the electrodes.
The magnesium chloride under the influence of electric field has been converted into the positive Mg ions and negative Cl ions. The positive Mg ion will move towards the negative electrode, and thus Mg has been produced.
For more information about negative electrode, refer to the link:
https://brainly.com/question/14702745
Define ionic bond and explain the formation of nacl and mgo
a.
Ionic bond is a bond in which there is complete transfer of valence electrons between atoms.
The atom that loses the valence electron is called the electron donor while the atom that accepts the electron is called the electron acceptor.
Ionic bond usually occurs between metals and non metals.
Ionic bond is a bond in which there is complete transfer of valence electrons between atoms.
b.
The force of attraction between Na⁺ and Cl⁻ forms the ionic bond.
In the formation of NaCl, Na has one valence electron in its outermost shell and Cl needs one electron to complete the stable octet configuration. Na donates its valence electron to Cl to form the ionic bond. So, the Na atom becomes positively charged with a charge of +1 while the Cl atom becomes negatively charged with a charge of -1.Since the atoms are now charged, the force of attraction between them forms the ionic bond.
c.
The force of attraction between Mg²⁺ and O²⁻ forms the ionic bond.
In the formation of MgO, Mg has two valence electrons in its outermost shell and O needs two electrons to complete the stable octet configuration. Mg donates its two valence electron to O to form the ionic bond. So, the Mg atom becomes positively charged with a charge of +2 while the O atom becomes negatively charged with a charge of -2.Since the atoms are now charged, the force of attraction between them forms the ionic bond.
Learn more about ionic bond here:
https://brainly.com/question/13526463
An ionic or electrovalant bond is a type of chemical bond, which is formed from two ions (charged atoms by loosing or gaining electrons) having opposite charges.
Ionic bonds are formed from the transfer of electrons from one atom to another. As the electrons are transferred there occurs a positively charged ions (cations) and a negatively charged ions (anions). These ions are held together in a crystal lattice structure by the strong electrostatic attraction between the positively charged cations and negatively charged anions.
The electrons are transferred as the atoms have tendencies to achieve a stable electronic configuration. They do this to attain a stable atomic structure. By transferring the electrons they attain their octet or duplet.
Sodium chloride(NaCl) is formed when the atom of sodium combines chemically with chlorine atom to generate an ionic compound.
Since sodium has an atomic number of 11, its electronic configuration is 2, 8, 1. There is only one electron in the outermost shell of a sodium atom. Therefore, the sodium atom gives one electron to produce the sodium ion Na⁺.
Chlorine has an atomic number of 17. Hence, its electronic configuration is 2, 8, and 7. The chlorine atom contains seven electrons in its outermost shell and requires one more electron to create the inert gas’s stable, eight-electron configuration. Consequently, a chlorine atom accepts one electron and creates the negatively charged chloride ion (Cl⁻).
When sodium interacts with chlorine, it donates its outermost electron to the chlorine atom, forming a sodium ion (Na⁺) and a chloride ion (Cl⁻) by accepting an electron. The strong electrostatic force of attraction between the newly created ions, holds sodium and chloride ions together to create sodium chloride, Na⁺Cl⁻ or NaCl.
Similarly in the case of Magnesium Oxide (MgO) is formed from the chemical interactions of Magnesium and oxygen atoms, leading to the formation of an ionic compound.
Since magnesium has an atomic number of 12, its electrical configuration is 2, 8 and 2, there is just 2 electrons in the outermost shell of a Magnesium atom. Therefore, the magnesium atom gives two electron to produce the Magnesium ion Mg²+ .
Oxygen has an atomic number of 8. Hence, its electronic configuration is 2 and 6, the oxygen atom contains 6 electrons in its outermost shell and requires 2 more electron to create the inert gas’s stable, eight-electron configuration. Consequently, a oxygen atom accepts 2 electronelectrons and creates the negatively charged oxide ion (O²-).
When magnesium interacts with oxygen, it donates its outermost electrons to the oxygen atom, generating a Magnesium ion Mg²+ . And an oxygen ion (O²⁻) by acquiring 2 electrons. The attractive electrical force holds magnesium and oxygen ions together to create sodium chloride, Mg²⁺ O²⁻ or MgO.
Learn more about ionic bond :
https://brainly.com/question/11527546
A solution containing cacl2 is mixed with a solution of li2c2o4 to form a solution that is 2. 1*10^-5m in calcium ion and 4. 75*10-5 m in oxalate ion. What will happen once these solutions are mixed?\.
Answer:
the answer is d
Explanation:
i know
0.0200 moles of a compound is found to have a mass of 1.64 g. Find the formula mass of the compound
Give your answers to 3 significant figures
Answer: 82.0 g/mole
Explanation:
Use the units to see that if we divide 1.64 grams by 0.0200 moles, we'll get a number that is grams/mole, the definition of formula mass.
1.64/0.0200 = 82.0 g/mole (3 sig figs)
We can't tell from this alone what the molecular formula might be, but C6H10 (cyclohexene) comes close (82.1 grams/mole).
The formula mass of the compound will be approximately 82.0 g/mol
The formula mass of the compound is the sum of atomic masses of all the atoms in its chemical formula. It is calculated by adding up the atomic masses of the individual elements in the compound, each multiplied by the subscript indicating the number of atoms of that element in the formula.
To find the formula mass of the compound, we'll use the relationship between moles, mass, and molar mass.
Molar mass (in g/mol) = Mass (in g)/Moles
Given:
Mass = 1.64 g
Moles = 0.0200 moles
Let's plug the values and calculate molar mass:
Molar mass = 1.64 g / 0.0200 moles
Molar mass ≈ 82.0 g/mol
The formula mass of the compound is approximately 82.0 g/mol, rounded to three significant figures.
To know more about formula mass here
https://brainly.com/question/28647347
#SPJ3
A yellow solid, W is soluble in water. Which method of separation can be used to obtain the solid W from an aqueous solution?
A Neutralisation
B Chromatography
С Distillation
D Crystallisation
If a particular utility burned 6.17 million tons of coal that was 2.00% sulfur by weight, how many tons of sulfur dioxide was emitted?
246800 tons of sulfur dioxide was emitted by the utility company who burned 6.17 million tons of coal.
6.17 million tons of coal contain 2.00% sulfur, hence the weight of sulfur is:
Weight of sulfur = 2% of 6.17 million tons = 0.02 * 6170000 = 123400 tons
123400 tons of sulfur is found in 6.17 million tons of coal
The weight of sulfur dioxide is twice that of sulfur, hence:
Amount of sulfur dioxide emitted = 2 * 123400 tons = 246800 tons
246800 tons of sulfur dioxide was emitted.
Find out more at: https://brainly.com/question/22255610
Which of the following correctly lists the particles in order from least massive to most massive.
A. electron, proton, hydrogen atom, helium atom
B. proton, electron, hydrogen atom, helium atom
C. proton, helium atom, hydrogen atom, electron
D. hydrogen atom, electron, helium atom electron
Answer:
The ans is : A. Electron, proton, hydrogen atom, helium atom.
An atom consist of sub atomic particles. The order of particles from least massive to most massive is electron, proton, hydrogen atom, helium atom. The correct option is A.
What are subatomic particles?The particles which are smaller in size than the atom are known as the sub atomic particles. An atom generally contains three sub atomic particles, they are protons, electrons and neutrons. The electrons revolve around the nucleus whereas the protons and neutrons are present at the center of the nucleus.
The protons are positively charged particles whereas the electrons are negatively charged. The neutrons are chargeless. The atomic number of 'H' atom is 1 and that of 'He' atom is 2.
The mass of e⁻ is 9.1 × 10⁻³¹ kg, proton is 1.67 × 10⁻²⁷ kg, 'H' atom is 1.66 × 10⁻²⁴ g, 'He' is 4 g. Thus the order is:
electron, proton, hydrogen atom, helium atom
Thus the correct option is A.
To know more about atom, visit;
https://brainly.com/question/14214017
#SPJ6
que es y que define a los elementos quimicos
Un elemento químico, o un elemento, se define como un material que no puede descomponerse ni transformarse en otra sustancia por medios químicos. Cada elemento se identifica según la cantidad de protones que tiene en su núcleo atómico. Se puede crear un nuevo elemento agregando más protones a un átomo.
_________
Espero eso ayude ⚜
ITZY :)