What is quantum, in your own words but be more detailed.

Answer:

Force = 11.33 Newton

Explanation:

Given the following data;

Impulse = 34 Ns

Time = 3 seconds

To find the force acting on the object;

Impulse = force * time

Substituting into the formula, we have;

34 = force * 3

Force = 34/3

Force = 11.33 Newton

Note: the impulse of an object is equal to the change in momentum experienced by the object.

Answer:

the answer is c

Explanation:

i did the test

Answer:

960W

Explanation:

v=R×I

v=60ohm.4A=240v

p=VI

p=240v.4A

p=960W

The power of a hair dryer with a current of 4 A and a resistance of 60 ohms is 960 W.

The amount of work completed in a given amount of time. Watt (W), which is derived from joules per second (J/s), is the SI unit of power. Horsepower (hp), which is roughly equivalent to 745.7 watts, is a unit of measurement sometimes used to describe the power of motor vehicles and other devices.

Given in the question a hair dryer with a current of 4 A and a resistance of 60 ohms power, p

Voltage, v=R×I

v=60 ohm.4 A=240 v

power, p=VI

p=240 v.4 A

p=960 W

The power of a hair dryer with a current of 4 A and a resistance of 60 ohms is 960 W.

To learn more about power refer to the link:

brainly.com/question/2289248

 #SPJ2

Answer:

3.0 A Is the correct option

Explanation:

I = V / R

I = 12/ 4

= 3

Answer:

proof in explanation

Explanation:

First, we will calculate the number of half-lives:

[tex]n = \frac{t}{t_{1/2}}[/tex]

where,

n = no. of half-lives = ?

t = total time passed = 2100 million years

[tex]t_{1/2}[/tex] = half-life = 700 million years

Therefore,

[tex]n = \frac{2100\ million\ years}{700\ million\ years}\\\\n = 3[/tex]

Now, we will calculate the number of uranium nuclei left ([tex]n_u[/tex]):

[tex]n_u = \frac{1}{2^{n} }(total\ nuclei)\\\\n_u = \frac{1}{2^{3} }(6400\ million)\\\\n_u = \frac{1}{8}(6400\ million)\\\\n_u = 800\ million[/tex]

and the rest of the uranium nuclei will become thorium nuclei ([tex]u_{th}[/tex])

[tex]n_{th} = total\ nuclei - n_u\\n_{th} = 6400\ million-800\ million\\n_{th} = 5600\ million[/tex]

dividing both:

[tex]\frac{n_{th}}{n_u}=\frac{5600\ million}{800\ million} \\\\n_{th} = 7n_u[/tex]

Hence, it is proven that after 2100 million years there are seven times more thorium nuclei than uranium nuclei in the rock.

Answer:

immma send you the link friend me on hereExplanation:

hope it is helpful to you

Answer:

Density = 0.243 g/cm³

Explanation:

Volume of cork = 23.5 cm³

Mass = 5.7 g

To find the density of the cork;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex]Density = \frac{mass}{volume}[/tex]

Substituting into the formula, we have;

Density = 5.7/23.5

Density = 0.243 g/cm³

Answer: 0.5A

Explanation:

According to Ohm's law, the Voltage(V) when a current flows through a resistor can be calculated by using the formula:

V = IR

where,

V = Voltage = 200V

I = current in amps (A)

R = resistance in ohms (Ω) = 400Ω

Current = Voltage / Resistance

I = V/R

I = 200/400

I = 0.5A

Therefore, the current is 0.5 Ampere

Answer:

Milk Lactometer

Milk Lactometer: A lactometer is an instrument that is used to check for the purity of milk by measuring its density.

lactometer is used to determine the purity of milk

hope it is helpful to you

Answer:

option one

Explanation:

equilibrium is used to describe the point in which something meets in this case the temperature of an object

Answer:

a) El piñón debe tener 20 dientes.

b) La bicicleta avanza aproximadamente 1,759 metros por cada pedaleada completa.

Explanation:

a) El plato es el engranaje más grande que forma parte del sistema de transmisión, acompañando a la cadena y el piñón integrado a la rueda trasera. Asumiendo que no existen pérdidas por fricción seca y que las condiciones de lubricación del sistema de transmisión son óptimas tal que las pérdidas de potencia son despreciables. Además, supongamos que la bicicleta viaja a velocidad constante, entonces tenemos la siguiente identidad mediante las definiciones de trabajo y potencia:

[tex]T_{P}\cdot \omega_{P} = T_{p}\cdot \omega_{p}[/tex] (1)

Donde:

[tex]T_{P}[/tex] - Torque del plato, en newton-metros.

[tex]T_{p}[/tex] - Torque del piñón, en newton-metros.

[tex]\omega_{p}[/tex] - Rapidez angular del piñón, en radianes por segundo.

[tex]\omega_{P}[/tex] - Rapidez angular del plato, en radianes por segundo.

Sabiendo el hecho que tanto el plato y el piñón experimenta la misma velocidad tangencial, podemos simplificar (1) como sigue:

[tex]\frac{T_{P}}{R_{P}} = \frac{T_{p}}{R_{p}}[/tex] (1b)

Puesto que el radio de cada elemento y el número de dientes son, por separado, directamente proporcionales al número de dientes, modificamos (1b) así y tenemos la siguiente identidad, la cual equivale a su vez a la razón de desarrollo:

[tex]\frac{T_{P}}{T_{p}} = \frac{N_{P}}{N_{p}} = \frac{R_{P}}{R_{p}} = \frac{\omega_{p}}{\omega_{P}}[/tex] (1c)

Donde:

[tex]N_{p}[/tex] - Número de dientes del piñón, sin unidad.

[tex]N_{P}[/tex] - Número de dientes del plato, sin unidad.

Si tenemos que [tex]r = 1,4[/tex] y [tex]N_{P} = 28[/tex], entonces tenemos que el número de dientes del piñón es:

[tex]r = \frac{N_{P}}{N_{p}}[/tex]

[tex]N_{p} = \frac{N_{P}}{r}[/tex]

[tex]N_{p} = \frac{28}{1,4}[/tex]

[tex]N_{p} = 20[/tex]

El piñón debe tener 20 dientes.

b) De acuerdo con la relación de desarrollo, por cada revolución realizada por el plato, el piñón realiza 1,4 revoluciones. Entonces, el avance realizado por la rueda trasera ([tex]s[/tex]), en metros, es igual al productor de la relación de desarrollo y la circunferencia de la rueda, es decir:

[tex]s = r\cdot 2\pi\cdot R[/tex] (1)

Donde [tex]R[/tex] es el radio de la rueda trasera, en metros.

Si conocemos que [tex]r = 1,4[/tex] y [tex]R = 0,2\,m[/tex], entonces el avance realizado por la rueda trasera es:

[tex]s = r\cdot 2\pi\cdot R[/tex]

[tex]s = (1,4)\cdot (2\pi)\cdot (0,2\,m)[/tex]

[tex]s \approx 1,759 \,m[/tex]

La bicicleta avanza aproximadamente 1,759 metros por cada pedaleada completa.

Answer:

The acceleration of the nfl players is 4.167 m/s²

Explanation:

Given;

velocity of the  nfl players, v = 10 m/s

time of motion of the nfl players = 2.4 s

Acceleration is the change in velocity with time.

The acceleration of the nfl players is calculated as follows;

a = v/t

where;

a is the acceleration of the nfl players

a = 10 / 2.4

a = 4.167 m/s²

Therefore, the acceleration of the nfl players is 4.167 m/s²

Answer:

» Battery or cell

» Switch

» Connecting wires

» Resistor or appliance

Answer:

f = 14.28 m

Explanation:

Given that,

Object distance, u = -50 m

The image distance from the lens, v = +20 m

We need to find the focal length of the lens. Let the focal length is f. Using the lens formula,

[tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}[/tex]

Put all the values,

[tex]\dfrac{1}{20}-\dfrac{1}{(-50)}=\dfrac{1}{f}\\\\f=14.28\ m[/tex]

So, the focal length of the lens is equal to 14.28 m.

Answer:

The voltage across light bulb 1 and light bulb 2 is the the same i.e V

Explanation:

In a parallel circuit, the Voltage is same across all the components of the circuit and the current flowing through each component is added to get the total current across the circuit.

Let us say, the voltage across the circuit is V. The voltage across light bulb 1 and light bulb 2 is the the same i.e V

Answer: C is correct :)

Explanation:

What are the following statements?

Answer:

B

Explanation:

First narrow answers to CIRCULAR motion.

Only A and B have circular motion.

Second look at the keyword UNIFORM. A swing does not have uniform motion because it will accelerate due to gravity and have the most velocity at the bottom of the swing.

Therefore, it must be B.

Answer:

1500kg

Explanation:

Initial velocity(u)=0m/s

Final velocity(v)=20m/s

Time taken=5s

Acceleration=v-u/t

Acceleration=20-0/5=4m/s^2

Force=6000N

Mass=?

Mass=Force/acceleration

= 6000/4

=1500kg

Answer:

P=I²R

Explanation:

P=2*10^-3 square times 10

4 times ten raise to power minus 5

Answer:

a. t = 2 s

b. vf = 20 m/s

Explanation:

a.

We can the second equation of motion to find out the time to reach the ground:

[tex]h = v_it + \frac{1}{2}at^2[/tex]

where,

h = height = 20 m

vi = initial velocity = 0 m/s

t = time taken to reach the ground = ?

a = acceleration = 10 m/s²

Therefore,

[tex]20\ m = (0\ m/s)t+\frac{1}{2} (10\ m/s^2)t^2\\\\t^2 = \frac{20\ m}{5\ m/s^2}\\\\t = \sqrt{4\ s^2}[/tex]

t = 2 s

b.

Here, we will use the first equation of motion to find the final speed:

[tex]v_f = v_i + at\\v_f = 0\ m/s + (10\ m/s^2)(2\ s)[/tex]

vf = 20 m/s

Answer:177.87

Explanation:

Answer:

A light wave travels through the vacuum of space

Explanation:

A light wave cannot be a matter wave because a matter wave is made up of

atoms while light wave is a form of radiation (electromagnetic). A matter wave requires a medium to travel while a light wave do not require medium to travel. Since light wave is a form of radiation, light can travel in vacuum.

Hence, the correct answer is A light wave travels through the vacuum of space

Answer:

As global population a.) increases food production must a.) increase.

Example:

More people means more food must be produced.

Answer:

The slope of a velocity graph represents the acceleration of the object. So, the value of the slope at a particular time represents the acceleration of the object at that instant.

Answer:

The slope of a velocity graph represents the acceleration of the object.

Explanation:

So, the value of the slope at a particular time represents the acceleration of the object at that instant.