What Group is this Element in?
O Group 3
O Group 4
O Group 7
Group 1

Answer:

anyone you just have to know how

Explanation:

Answer:

Yes

Explanation:

Electronegativity is the tendency for atoms to keep electrons closer to them. So, if the atoms are smaller there, there is a stronger pull on the electrons to keep them closer. So, the larger the atom get, due to electron shielding, it become less electro negative. I hope this help. You might get a better explanation from Khan Academy's video on Electronegativity

Answer:

A relationship is intuitively expected

Does electronegativity relate to atomic radius? A relationship is intuitively expected between electronegativity and radius: the size of an atom is determined by the distribution of electrons around its nucleus. The closer the electrons are to the nucleus, the more tightly they are bound, thus increasing the electronegativity of the atom.

Explanation:

Answer:

B: Microscopic organisms are not made of cells

Explanation:

Answer:

Molecularity is the number of ions or molecules that take part in the rate determining step

Order of reaction is the number of molecules of reactant whose concentration changes during the chemical change

Answer:

They will form a hydrogen bond with the oxygen atom and the polar hydrogen atom.

Between a water molecule and an ethanol molecule, a hydrogen bond can occur between a lone pair of electrons on the Oxygen and  a Hydrogen in water and the Polar hydrogen of an ethanol molecule.

Hydrogen bonding is an interaction involving a hydrogen atom located between a pair of other atoms having a high affinity for electrons.

It is a bond is weaker than an ionic bond or covalent bond but stronger than van der Waals forces.

In the given question, They will form a hydrogen bond with the oxygen atom and the polar hydrogen atom.

Learn more about hydrogen bond here ;

https://brainly.com/question/10904296

#SPJ5

Answer:

Decompositon

Explanation:

Sodium chlorate → Sodium Chloride + Oxygen

Sodium chlorate is reactant.

Sodium chloride + Oxygen is the product.

Definition : -

Decomposition reaction is a chemical reaction in which a single reactant breaks down to simpler products.

Answer:

Their speed = 69.9043 miles per hour

Their speed = 112.5 kilometers per hour

Explanation:

Answer:

Explanation:

Convergent boundaries: where two plates are colliding. Subduction zones occur when one or both of the tectonic plates are composed of oceanic crust. ...

Divergent boundaries – where two plates are moving apart. ...

Transform boundaries – where plates slide passed each other.

Answer:

this my answer

Explanation:

Answer:

insta

Explanation:

Zak_1231 follow me

Answer:

Explanation:

The volume of a balloon is 30 L at 313K and a pressure of 153KPA What is the volume at 273K and 101.3kPa?

from PV=nRT we can derive

PV/T =P'V'/T' so

153X30/313 = 101.3 X V'/273

OR 153 X 30 X273/(313 X 101.3) =V'

V' = 39.5 L

Answer:

Octane

Explanation:

What is CH3CH2CH2CH2CH2CH2CH2CH3?

Octane - CH3CH2CH2CH2CH2CH2CH2CH3.

Answer:the name is cc bc it 4920 and hehe i just want points thank you

Explanation: lol did wsiw skwks thanks for points

Explanation:

there are 8 atoms of hydrogen

To determine the most similar element identify the atomic number of the element and other properties such as state of the matter, color, conductivity, or boiling point.

In the period table, elements are arranged based on two main factors:

Now, if you know both the atomic number or the properties you can determine which element is the most similar to the element that you have.

Note: This question is incomplete because there is no information bout the element "oregano"; due to this, I answered it based on general knowledge.

Learn more in: https://brainly.com/question/7373020

Answer:

4) 2Na + Cl2 → 2NaCl

5) 2Mg + O2 → MgO

6) 2H2 + 2O2 → 2H2O

Explanation:

4) In order for it to be well balanced, yeah you've got to add 2 in front of Na before the reaction and after the reaction.

5) Add 2 in front of Mg bcuz of the same reason in number 4 but you don't have to add 2 in front of the others bcuz it's alrd well balanced.

6) Tbh for this one, it got me staring at my cat until he freaks out but like yeahh, I tried :')

Answer:

So one mole of Fe2O3 contains two moles of Fe3+ ions.

Explanation:

As there is an internal mole ratio of 2:3

It means that there are 2moles of iron within every mole of iron(III) oxide.

Iron III oxide is an ionic compound composed of Fe3+ ions and O2- ions. According to the formula, there are three O2- ions for every two Fe3+ ions.

Extra:

One 'unit' of Fe2O3 has two Fe3+ ions and three O2- ions, hence a dozen Fe2O3 contains two dozen Fe3+ ions and three dozen O2- ions, and a mole Fe2O3 contains two moles Fe3+ ions and three moles O2- ions.

Answer:

14

Explanation:

Answer:

11419 J/g/ 11.419 KJ/g

Explanation:

H=MCQ

H=225×2.03×(-15-10)

H=225×2.03(25) Note; negative sign is of no use

H=11419J/g

Answer:

The traditional electrolyte for aluminium electrolysis is based on molten cryolite (Na3AlF6), acting as solvent for the raw material, alumina (Al2O3).Metals are found in ores combined with other elements. Electrolysis can be used to extract a more reactive metal from the ore.

Aluminum can and is used as both anodes and cathodes in electrochemical cells, but there are some peculiarities to using it as an anode in aqueous solutions. As you note, aluminum forms a passivating oxide layer quite readily, even by exposure to atmosphere. In an aqueous solution, if the potential is high enough, OH− and O2− are generated at the anode, which can then react with the aluminum to produce aluminum oxide. Al^3+ can also be generated directly. The electric field will draw the anions through the growing aluminum oxide layer towards the aluminum surface and the Al^3+ towards the solution, making the oxide layer grow both away from the electrode surface and into the surface of the electrode. In this way, coatings thicker than the normal passivation in air can be produced. However, aluminum oxide is a good electrical insulator, thus if a dense non-porous layer is grown, it will become impossible to pass current through it and growth will stop, leaving a relatively thin oxide layer (this is how the dielectric layers in electrolytic capacitors are made). This is the normal behaviour in aqueous solutions at near-neutral pH (5–7).

However, if a thick aluminum oxide layer is desired (e.g. to produce coatings on aluminum parts for dying or durability), maintaining porosity is necessary to avoid completely blocking access to the surface. One technique that is commonly used is using a low pH solution, which tends to redissolve some of the oxide and neutralize some of the formed OH−, leaving pores in the oxide layer through which the ions can travel and continue to react. These pores also give a good structure to retain dyes or lubricants, but generally need to be sealed after to protect against corrosion.

Answer:

First one answer is physical and other remaning chemical

Answer:

Hydrogen is a colorless, tasteless, and odorless gas.  

physical

--------------------------------------------------------------------------------------------------------------

Hydrogen is very combustible in the presence of oxygen.  

chemical

--------------------------------------------------------------------------------------------------------------

Hydrogen is very reactive with most elements.  

chemical

--------------------------------------------------------------------------------------------------------------

Hydrogen is the least dense of all elements.  

physical

Answer:

due to the overlaying layers of strata (layers of earth) an high pressure is created at the core. due to this it behaves like an solid rether than being a liquid... the lower mantle is not solid because in this case the overlaying strata doesn't produce that much pressure on it..

Explanation:

brainliest plz

Answer:  

Find moles of Known Substance (NaCl)

Moles of NaCl = mass ÷ molar mass

                        =  114.25 g ÷ 58.44 g/mol

                        = 1.955 mol

Use Mole Ratio of Known to Unknown (NaCl : NaClO₃) to Determine Moles of Unknown

The mole ratio of NaCl to NaClO₃ is 2 to 2 or simply 1 to 1.

This means that for each mole of NaCl produced the same number of moles of NaClO₃ was decomposed.

∴ since moles of NaCl = 1.955 mol,

then moles of NaClO₃ = 1.955 mol

Find Mass of Unknown

Mass of NaClO₃ = moles × molar mass

                           = 1.955 mol × 106.44 g/mol

                           =  208.09 g

Determine the Moles of Known (O₂)

moles of O₂ = (volume × density) ÷ molar mass

                    = (68.30 L × 0.0828 g/L) ÷ 32 g/mol

                    = 0.177 mol

Use Mole Ratio of Known to Unknown (O₂ : NaClO₃) to Determine Moles of Unknown

Mole ratio of O₂ : NaClO₃ is 3 : 2. Therefore for each mole of oxygen produced, ²/₃ the moles of NaClO₃ is produced.

∴ if moles of O₂  =  0.177 mol

then moles of NaClO₃ =  0.177 mol × ²/₃

                                     = 0.118 mol

Find the Number of Particles of Unknown

Number of particles  = moles × Avogadro's Number

                                  = 0.118 mol × (6.022 × 10²³ particles/mol)

                                  =  7.11 × 10²² particles

to be honestl id ldm

One:

plants make their own food through a process known as photosynthesis

Two:

Photosynthesis is a process used by plants and other organisms to convert light energy into chemical energy and stored in the form of starch which can be used later

Three:

Photosynthesis converts carbon dioxide and water into oxygen and glucose. Glucose is used as food by the plant and oxygen is a by-product.

Answer:

1. b

2. a

3. b

Explanation:

Explanation:

desk I have a lot of work and I will send it in the one

Answer:Accuracy Thermometers used to measure the temperature of food need to be accurate to +/-2°F or +/-1°C. Thermometers used to measure air temperature in food storage equipment need to be accurate to +/-3°F or +/- 1.5°C. A hanging thermometer in a walk-in cooler is an example.

Explanation:

Answer:

Density is a measure of how heavy something is compared to its size.

If an object is more dense than water it will sink when placed in water, and if it is less dense than water it will float.

Density is a characteristic property of a substance and doesn’t depend on the amount of substance.

Explanation:

If you compared the weight of wood and an equal amount, or volume, of water the sample of wood would weigh less than the sample of water. This means that wood is less dense than water. Since wood is less dense than water, wood floats in water, no matter how big or small the piece of wood is.

A student might want to know why a boat made out of steel can float when steel is more dense than water. This is not an easy question and requires a different approach than what students have seen so far. We do not necessarily recommend the following explanation for 5th graders but here is the idea:

An object floats when it displaces a volume of water that has a mass equal to the mass of the object. So if a material like steel is shaped into a boat and made larger and larger, it will displace more and more water. When it is large enough to displace a volume of water that has a mass equal to the mass of the boat, the boat will float.

Answer:

1 is protons and neutrons

2 is electrons and protons

3 Is protons