Answer:
Cr
Explanation:
Cr goes from +3 to +6 and when it increases it means is being oxidized.
The element being oxidized in the redox reaction is Cr. Oxidation state helps to determine the amount of oxidation which an atom undergoes. An increase in oxidation state or number signifies oxidation has taken place.
A decrease in oxidation state depicts reduction has taken place. In this
scenario, the element Cr has a change in oxidation state from +3 to +6 which
signifies oxidation took place in the atoms of the element. This is why Cr will
be the right option.
Read more on https://brainly.com/question/25653911
Which two substances are reactants in the chemical reactions of cellular respiration?
Answer:
The answer is A and C.
Explanation:
The reactants in the process of cellular respiration are oxygen and glucose, respectively. It is ATP that serves as the primary product of cellular respiration, with carbon dioxide and water serving as waste products.
Sugar is a glucose.
Oxygen and glucose are the two substances that are reactants in the chemical reactions of cellular respiration. Therefore, the correct options are options A, C.
What is cellular respiration?Through the process of cellular respiration, organisms mix oxygen with food molecules, directing the chemical energy contained in these substances towards life-sustaining processes while excreting carbon dioxide and water as waste. Foods are broken down by microorganisms that do not require oxygen in a process known as fermentation.
Adenosine triphosphate (ATP), an energy-rich compound that absorbs the chemical energy generated by the decomposition of food molecules then releases it to power other cellular functions, is one goal of the breakdown of foodstuffs. ATP is created when the energy found inside chemical bonds is converted from one form to another. Oxygen and glucose are the two substances that are reactants in the chemical reactions of cellular respiration.
Therefore, the correct options are options A, C.
To know more about cellular respiration, here:
https://brainly.com/question/29760658
#SPJ2
answer this please thank you
Answer:
Explanation:
D is the correct answer
Can anybody complete this for me?
Answer:
I wish i could
Explanation:
Given the ionic formula below, what is the charge on ion X? Be sure to
include the sign (+ or -). Li2 x
Answer:Charge on X = (+ 2)
Explanation:
Charge on one Cl = -1
So Charge on two Cl = -2
The molecule = Neutral = 0 charge
So, to make total charge = 0 , the X should have +2 charge
XCl2 = +2 -2 = 0
X = +2
Alkaline earth metals(Be , Mg , Ca , Sr) form such type of compounds
Explanation:
as the solar nebula cooled which compounds were the first to condense from a gas to a solid? Rock water ice or metal
As the solar nebula cooled METAL compounds are the first to condense from a gas to a solid. The solar nebula gave birth to the Solar system.
A solar nebula is a disc-shaped cloud of gases and grain dust, which gave birth to the Sun and planets of the Solar system, approximately 4.6 billion years ago.
The solar nebula is at the beginning a mixture of interstellar gases (hydrogen and helium) and dust grains.
As the solar nebula cools, heavy elements such as metals in the disk condensate into planetesimals.
Learn more in:
https://brainly.com/question/14151385
a 13.5 g sample of zinc(zn) heated from 24.2 degrees celsius to 83.6 degrees celsius that absorbs 312j of heat? use specific heat
Explanation:
83.6-24.2= 59.4 which is the change in heat
A hydrochloric acid solution is standardized by titrating 0.2329 g of primary standard sodium carbonate to a methyl red end point by boiling the carbonate solution near the end point to remove carbon dioxide. If 42.87 mL acid is required for the titration, what is its molarity
HELP
The molarity of the acid, HCl solution is 0.103 M
We'll begin by calculating the number of mole in 0.2329 g of Na₂CO₃
Mass of Na₂CO₃ = 0.2329 g
Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3) = 106 g/mol
Mole of Na₂CO₃ =?Mole = mass / molar mass
Mole of Na₂CO₃ = 0.2329 / 106
Mole of Na₂CO₃ = 0.0022 mole Next, we shall determine the number of mole of HCl needed to react with 0.0022 mole of Na₂CO₃Na₂CO₃ + 2HCl —> 2NaCl + H₂O + CO₂
From the balanced equation above,
1 mole of Na₂CO₃ reacted with 2 moles of HCl.
Therefore,
0.0022 mole of Na₂CO₃ will react with = 0.0022 × 2 = 0.0044 mole of HCl
Finally, we shall determine the molarity of the HCl.Mole of HCl = 0.0044 mole
Volume = 42.87 mL = 42.87 / 1000 = 0.04287 L
Molarity of HCl =?Molarity = mole / Volume
Molarity of HCl = 0.0044 / 0.04287
Molarity of HCl = 0.103 MThus, the molarity of the acid, HCl solution is 0.103 M
Learn more: https://brainly.com/question/14600914
Calculate the moles of HCl in 15 mL of a 0.50 M solution.
Explanation:
[tex]\tiny\implies Molarity = \dfrac{no. \: of \: moles \: of \: solute \times 1000}{volume \: of \: the \: solution \: (in \: ml)} [/tex]
[tex]\tiny\implies 0.50 = \dfrac{no. \: of \: moles \: of \: solute \times 1000}{15}[/tex]
[tex]\tiny\implies no. \: of \: moles \: of \: solute \times 1000 = 0.50 \times 15[/tex]
[tex]\tiny\implies no. \: of \: moles \: of \: solute \times 1000 = 7.5[/tex]
[tex]\tiny\implies no. \: of \: moles \: of \: solute = \dfrac{7.5}{1000} [/tex]
[tex]\tiny\implies \bf no. \: of \: moles \: of \: solute = 0.075 \: mol[/tex]
Which statement best describes a mechanical wave?
Answer:
A mechanical wave is a wave that is an oscillation of matter, and therefore transfers energy through a medium.
Explanation:
While waves can move over long distances, the movement of the medium of transmission—the material—is limited. Therefore, the oscillating material does not move far from its initial equilibrium position.
--------------
hope this helped!
✼-answers by brookeangelx
The wave transmits energy from one point to another in the form of signals. Some waves require a medium for propagation while some others does not require a medium for the propagation.
What is a mechanical wave?The mechanical wave is defined as the wave which involves the oscillation of matter and it is responsible for the transfer of energy through a medium. These types of waves does not need a medium for propagation.
The mechanical waves cannot travel through vacuum. Some of the examples of mechanical waves are sound waves, water waves, seismic waves, etc. These waves are not capable of transmitting its energy through a vacuum.
The sound wave is a mechanical wave and the medium which it propagates can be solid, liquid or gas. It can travel fastest in solids and slower in gases.
Thus mechanical wave is an oscillation of matter.
To know more about mechanical wave, visit;
https://brainly.com/question/26116832
#SPJ6
After being placed on the table where should the ocular lenses face?
Find five household items that contain ionic compounds. List the following information for each compound: a.name of the product
b. the chemical name of the ionic compound
d.the chemical formula of the ionic compound c. identify the ions present in each compound
Answer:
D . GOD BLESS .
Explanation:
What instruments are used to measure moleculars vibration , rotation and translation?
Answer:
you hear
Explanation:
beautiful hear can be wonderful day in your life so to be rotations is not a big deal
Consider the case where a closed vessel initially is filled with 1 mol of EE at 88 kPa. Then, pure EtOH is gradually added to the system at constant temperature and pressure until the system is comprised of 1 mol EE and 9 mol EtOH. Describe how the phase behavior and phase composition change throughout this process. Does the system phase separate at any point
Answer:
chu papi
Explanation:
What is the mass in grams of one mole of sulfur? (round to 3 sig figs)
Answer:
This tells you that one mole of sulfur atoms, S , has a mass of 32 g
Calculate how many moles are in 63.1 grams FeCl3.
Answer: 1 grams FeCl3 = 0.0061650760770388 mole using the molecular weight calculator and the molar mass of FeCl3.
Explanation:
A 14.0 L container at 323 K holds a mixture of two gases with a total pressure of 8.00 atm. If there are 1.50 mol of Gas A in the mixture, how many moles of Gas B are present
The number of moles of gas B present in the gas mixture is 2.72 moles.
The given parameters;
Volume of the gases, V = 14 LTemperature of the gases, T = 323 KTotal pressure of the gases, P = 8 atmNumber of moles of gas A = 1.5 molesThe total number of moles of the gases is calculated by applying ideal gas law;
PV = nRT
where;
R is ideal gas constant = 0.0821 L.atm./mol.K
n is the total mole of the gases
[tex]n =\frac{PV}{RT} \\\\n = \frac{8 \times 14}{0.0821 \times 323} \\\\n = 4.22 \ moles[/tex]
The number of moles of gas B is calculated as follows;
[tex]n_B = 4.22 - n_A\\\\n_B = 4.22 - 1.5\\\\n_B = 2.72 \ moles[/tex]
Learn more about ideal gas law here: https://brainly.com/question/21912477
which two types of food are homogeneous mixtures
A. mustard
B. mayonnaise
C. tossed salad
D. trail mix
Convert the heat of neutralization of acetic acid from -49,8 kj/mmol to calories per
millimole and ROUND TO ONE DECIMAL PLACE (1 cal = 4.184 J)
DO NOT INCLUDE UNITS
This question is providing the exothermic heat of neutralization of acetic acid in units of kilojoules per mollimole (-49,8 kj/mmol) and asks for the same value but in calories per millimole which results -11,902.5 cal/mmol.
In this case, according to the given problem, it turns out necessary to solve a two-factor conversion in order to convert the kilojoules to joules and finally to calories as shown below:
[tex]-49.8\frac{kJ}{mmol}*\frac{1000J}{1kJ}*\frac{1cal}{4.184J}[/tex]
Thus, we cancel out the kJ and J, to obtain the following result, rounded to one decimal place:
[tex]-11,902.5\frac{cal}{mmol}[/tex]
Learn more:
https://brainly.com/question/2731380https://brainly.com/question/2921187If such an ion is negatively charged and includes one or more oxygen atoms
Answer:
atom
Explanation:
The sodium atom has a single valence electron that it can easily lose. (If the sodium atom loses its valence electron, it achieves the stable electron configuration of neon.) The chlorine atom has seven valence electrons and can easily gain one electron.
To what volume would you have to change 6.5 Liters of a gas at 1.25 atm in order to
decrease its pressure to 1.0 atm?
Answer:
8.13 mLExplanation:
The required volume can be found by using the formula for Boyle's law
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
From the question we have
[tex]V_2 = \frac{6.5 \times 1.25}{1} = 6.5 \times 1.25 \\ = 8.125[/tex]
We have the final answer as
8.13 mLHope this helps you
explain in details what a matter is...!!!
Answer:
umm
Explanation:
matter makes up everything. everything is matter
the more matter an object has the more mass It has
Describe your observations when the paper clip was gently crushed with the pestle
Answer:
We can do an experiment with vinegar to see what happens to the calcium in an eggshell when it is exposed to an acid.
How is hydrogen isolated from water
To extract hydrogen from water, researchers insert two electrodes across the water and pass current, which can separate the hydrogen from water. The process called electrolysis of water. ... An electric field applied through the cobalt oxide to water molecules resulted in the electrolysis of water
Hydrogen gas is an environment-friendly fuel — it produces water on combustion in the presence of oxygen. ... To extract hydrogen from water, researchers insert two electrodes across the water and pass current, which can separate the hydrogen from water. The process called electrolysis of water.
từ một dung dịch có pH=7 muốn tạo thành dung dịch có pH nhỏ hơn 7 thì cho vào dung dịch
Answer:
you lift my feet off the ground spin me around you make me crazier crazier
1: Given that Ka for HCOOH is 1.8×10^-4 at 25°C what is the value of b for COOH− at 25 °C?
Kb=
2: Given that b for (CH3)2 NH is 5.4×10^-4 at 25°C, what is the value of Ka for (CH3)2NH+2 at 25 °C?
Ka=
Explanation:
At 25 °C Dissociation constant of water or Kw = 1× 10^-14 mol2dm-6
Ka × Kb = Kw for all diluted solutions
Ka×Kb = 1 × 10^-14 mol2dm-6
Therefore for question 1 -
COOH- is the conjugate base for HCOOH ( we find the conjugate base by removing an H atom and the Conjugate acid by adding an H atom)
COOH- (aq) + H2O ( l) <-----> HCOOH( aq) + OH-(aq)
So we can apply the above mentioned equation to find Kb value for COOH-
Kb = 5.56 × 10^-11 moldm-3
For question 2-
We can see that (CH3)2NH+2 is the conjugate acid of (CH3)2 NH. (A H atom has been removed so the one with a H atom less is the conjugate base.)
(CH3)2NH+2 (aq) + H2O (l) <-----> (CH3)2 NH (aq) + H3O+ (aq)
So applying the previously mentioned equation we get Ka = 1.85 × 10^-11 moldm-3
Bethany observes a white crystal that is cube shaped under a microscope.
Based on this observation, Bethany thinks the crystal could be sodium chloride, or table
salt. Because the crystal has an extended structure, she knows that sodium chloride is
not a molecule. Bethany uses gray and white spheres, representing the atoms in
sodium chloride, to make a model of the crystal’s most likely structure, as shown.
a. Provide two reasons why the model accurately represents sodium chloride. Support
your reasons with evidence from the model.
b. Predict whether the melting point should be high or low based on the model.
Answer:
In nature there are many different minerals we call "Salts". If you look very closely at the particles of table salt, you will find little cubic crystals. These salt crystals are made of sodium chloride (NaCl), and their cubic shape is due to a very specific arrangement of the atoms. As discussed earlier, all of the minerals classified as salts are held together through ionic bonds. The arrangement of atoms, the shapes of the crystals they form, and their mechanical, thermal, and electrical properties are all due to this special type of bonding
The two reasons why the model shows sodium chloride is that:
Sodium chloride crystals are cubic in their form as they have crystalline structure.Why sodium chloride does not exist as molecule?The other is that:
Sodium chloride does exist as an aggregates of a bigger number of ions that are oppositely charged as shown using gray and white spheres.The melting point will be high based on the model as because Sodium chloride is known to have high melting and boiling point.Note that a lot of Formula unit cannot exist as a single entity. Because of this, compound such as NaCl exist only as an aggregates of a more bigger number of ions that are oppositely charged .
Learn more about Sodium chloride from
https://brainly.com/question/24490939
#SPJ2
In this photograph, a soccer player is about to kick the ball. Use the situation to explain that when two objects interact, the force between them can cause energy to be transferred. In your response, identify the type of energy that each object has before they interact, the forces exerted when the objects interact, and the type of energy that each object has after they interact.
The explanation to the question is stated as follows:
Newton's first law of motion states that: a body will continue in its state of rest or uniform motion unless an external force acts on it. So then, the ball initially possesses potential energy because it was at rest. While the leg of the soccer player possesses kinetic energy because its in motion.
Thus, when the player hits the ball, a force known as push has been applied. This would ensure that the ball compels and moves in the direction of the applied force. Therefore after the interaction, the leg of the player now possesses potential energy, since it would come to rest after hitting the ball. While the ball would start moving, now possessing kinetic energy.
Visit: https://brainly.com/question/12099288
How many grams are in 0.787 moles of kcn
Answer:
=> moles = Given mass/molar mass
=> 0.787 = Given mass/(39 + 12 + 14)
=> 0.787 = Given mass/65
=> mass = 0.787 × 65
=> mass = 51.155 g
A 15.0-L vessel contains 0.50 mol CH4 with a pressure of 1.0 atm. After 0.50 mol C2H6 is added to the vessel, what is the partial pressure of CH4? The temperature remains unchanged throughout the process.
Answer: Hi! The partial pressure of CH4 is
=1 atm
Explanation:
The partial pressure of methane in the mixture of methane and ethane has been 1 atm.
Partial pressure has been the pressure exerted by a gas in the solution or mixture. The partial pressure of each gas has been the total pressure of the gaseous mixture.
The partial pressure of the gas has been dependent on the volume, temperature, and concentration of the gas.
The given methane has a partial pressure of 1 atm in the 15 L vessel. The addition of ethane results in the change in the total pressure of the mixture, as there have been additional moles of solute that contributes to the solution pressure.
However, since there has been no change in the concentration and volume of methane, the pressure exerted by methane has been the same. Thus, the partial pressure of methane has been 1 atm.
For more information about the partial pressure, refer to the link:
https://brainly.com/question/14623719
When the pressure of a gas decreases, which quantity will increase, assuming all other variables are held constant?
OR
ОТ
On
OV
I don't think the answer is in one of the options- unless I am reading it wrong and there is a 'V' option.
The volume (V) of gas increases when the pressure of the gas decreases assuming all the other variables are held constant.
I hope this helps!