Answer:
4 amp
Explanation:
From ohm's law,
V=IR
so,
I=V/R
I=120/30
I=4amp ans..
A. Explain how the slow recovery of the bald eagle population likely affected the recovery
of the salmon population. (
Answer:
Increasing or recovering population number for eagle will reduce the number of salmons
Explanation:
Eagle feed upon the salmon or is a predator for salmon.
If the population of eagle is recovering then it is clear that they will feed upon large number of salmon thereby reducing their numbers.
Hence the increasing or recovering population number for eagle will reduce the number of salmons
The slow recovery of the bald eagle population likely affected the recovery of the salmon population by Increasing population number for eagle will reduce the number of salmons.
What is population?The large group of same or different kinds of species living in the same habitat are collectively called as population.
Eagle feed upon the salmon or said to be a predator for salmon.
If the population of eagle is increasing then it is clear that they will feed upon large number of salmon which will reduce their numbers.
Hence, the increasing population number for eagle will reduce the number of salmons denotes slow recovery.
Learn more about population.
https://brainly.com/question/27779235
#SPJ5
A diving company is looking for a shipwreck 35 m below the surface of the ocean. The command ship locates the wreck at 55 degrees South of West at an angle of depression of 18 degrees reference the surface. The command ship notifies the diver, who is located 27 degrees South of East at an angle of depression of 30 degrees. How far must the diver travel to arrive at the wreck?
Answer:
The distance between the diver and the shipwreck is approximately 130.76 m
Explanation:
The depth of the shipwreck below the surface of the water = 35 m
The location of the wreck = 55° South of West
The angle of depression of the wreck = 18°
The location of the diver = 27° South of East
The angle of depression of the diver = 30°
The distance of the wreck from the ship = 35 m/(sin(18°)) ≈ 113.26 m
The horizontal distance of the wreck from the ship = 35 m/(sin(18°)) × (cos(18°)) ≈ 107.72 m
The x-coordinate of the shipwreck, x₁ = 107.72 m × cos(55°) ≈ 61.79
The y-coordinate of the shipwreck, y₁ = 107.72 m × sin(55°) ≈ -88.24
The z-coordinate of the shipwreck, z₁ = -35
The distance of the diver from the ship = 35 m/(sin(30°)) = 70 m
The horizontal distance of the diver from the ship = 70 m × cos(30°) ≈ 60.62 n
The x-coordinate of the diver from the ship, x₂ = -60.62 m × cos(27°) ≈ -54.013
The y-coordinate of the diver from the ship, y₂ = 60.62 × sin(27°) ≈ -27.52
The z-coordinate of the diver from the ship, z₂ = -35
The distance between the diver and the shipwreck, 'd', is given by the distance between two points given the x, y, z coordinates as follows;
d = √((x₂ - x₁)² + (y₂ - y₁)² + (z₂ - z₁)²)
Therefore, we have;
d = √((61.79 - (-54.013))² + (-88.24 - (-27.52))² + (35 - 35)²) ≈ 130.76
The distance between the diver and the shipwreck, d ≈ 130.76 m.
[tex]what \: is \: matter \: \: \: {?} [/tex]
Answer:
matter is any substance that has mass and takes up space by having volume.
Explanation:
Matter is anything that has a mass and it takes up space or has a volume .
matters are made up many atoms or molecules .
hope it is helpful to you
stay safe, happy and healthy
An average 1.50 V Alkaline AA battery has 9,360 J of stored energy. If the battery is placed in a toy that requires 2.00 amperes of current to operate, how many minutes will the battery last before it runs out of energy?
Answer:
52 minutes
Explanation:
Given the following data;
Voltage = 1.5 V
Current = 2 Amperes
Energy = 9360 J
To find how many minutes will the battery last before it runs out of energy;
First of all, we would determine the power rating of the toy
Power = current * time
Power = 2 * 1.5
Power = 3 Watts
Next, we find the time;
Energy = power * time
9360 = 3 * time
Time = 9360/3
Time = 3120 seconds
To convert to minutes;
60 seconds = 1 minute
3120 seconds = 3120/60 = 52 minutes
the molar mass of a gas is (blank)
The molar mass of a gas is molecular
⇒The molecular weight molar mass of any gas is the mass of one particle of that gas multiplied by Avogadro's number (6.02 x 1023). Knowing the molar mass of an element or compound can help us stoichiometrically balance a reaction equation.
electromotive force in a circuit;
A) causes free electrons to flow
B) increases the circuit resistance
C) maintains circuit resistance
D) it needed to make the circuit complete
Answer:
A causes free electrons to flow
Explanation:
The amount of force that causes electrons to flow in a conductor is called electromotive force.
if a car is taken from the garage driven for 100km before returning to the garage after 2 hours what is it average speed?
Answer:
50km/h
Explanation:
Average Speed = Distance/Time
100km/2h = 50km/h
According to Archimedes' principle, when will an object float in water?
A. When its volume is less than the volume of water it displaces
B. When its weight is equal to the buoyant force exerted by the water
C. When its density is greater than the density of water
D. When its weight is greater than the weight of water it displaces
Answer:
Its B
Explanation:
a p e x
A 140 kg load is attached to a crane, which moves the load vertically. Calculate the tension in the cable for the following case:
How far will the load move if it starts from rest and accelerates for 20 seconds?
Answer:
The answer is below
Explanation:
A 140 kg load is attached to a crane, which moves the load vertically. Calculate the tension in the
cable for the following cases:
a. The load moves downward at a constant velocity
b. The load accelerates downward at a rate 0.4 m/s??
C. The load accelerates upward at a rate 0.4 m/s??
Solution:
Acceleration due to gravity (g) = 10 m/s²
a) Given that the mass of the crane (m) is 140 kg. If the load moves downward, the tension (T) is given by:
mg - T = ma
Since the load has a constant velocity, hence acceleration (a) = 0. Therefore:
mg - T = m(0)
mg - T = 0
T = mg
T = 140(10) = 1400 N
T = 1400 N
b) If the load moves downward, the tension (T) is given by:
mg - T = ma
T = mg - ma = m(g - a)
T = 140(10 - 0.4) = 140(9.96) = 134.4
T = 134.4 N
c) If the load moves upward, the tension (T) is given by:
T - mg = ma
T = ma + mg = m(a + g)
T = 140(0.4 + 10) = 140(10.4)
T = 145.6 N
2) To find the distance (s) if the load move from rest (u= 0) and accelerates for 20 seconds (t = 20). We use:
s = ut + (1/2)gt²
s = 0(20) + (1/2)(10)(20)²
s = 2000 m
how do i get a negative cube when i calculate density
Answer:
density should always be positive, you must have missed a sign somewhere
What is the sum of a systems potential and kinetic energy is equal to?
a. Total Energy
b. Mechanical Energy
c. Thermal Energy
d. Hyper Energy
Answer:
Explanation:
TE = KE + PE which is total energy available to a system is equal to its potential energy plus its kinetic energy, and that total energy will remain throughout the entire "trip", whatever it might be. So a is your answer.
A 0.2 kg block sliding on a horizontal table slows down from 25 m/s to 20 m/s. How much energy does the block lose due to friction?
Answer:
the kinetic energy lost due to friction is 22.5 J
Explanation:
Given;
mass of the block, m = 0.2 kg
initial velocity of the block, u = 25 m/s
final velocity of the block, v = 20 m/s
The kinetic energy lost due to friction is calculated as;
[tex]\Delta K.E= K.E_f - K.E_i\\\\\Delta K.E= \frac{1}{2}mv^2 - \frac{1}{2}mu^2\\\\\Delta K.E= \frac{1}{2}m(v^2 -u^2)\\\\\Delta K.E= \frac{1}{2} \times 0.2 (20^2 - 25^2)\\\\\Delta K.E= -22.5 \ J[/tex]
Therefore, the kinetic energy lost due to friction is 22.5 J
Answer:
22.5 J
Explanation:
It loses the difference in kinetic energy between the starting and ending speeds and that is (1/2)(M)(V1)^2 - (1/2)(M)(V2)^2 = (1/2)(M)((V1)^2 -(V2)^2) = (1/2)(0.2 kg)((25)^2 - (20)^2) = 22.5 Joules.
A man exerts more pressure while standing on one foot than by two foot
Answer:While walking, one foot is in contact with the ground at a time. The surface area of one foot is less than two feet. Therefore, the pressure is more than the pressure exerted while standing, as the surface area of both feet is more.
for an ideal monoatomic gas, the internal energy U os due to the kinetic energy and U=3/2RT per mole.show that cv=3/2R per mole and Cp=5/2RPer mole
Answer:
i. Cv =3R/2
ii. Cp = 5R/2
Explanation:
i. Cv = Molar heat capacity at constant volume
Since the internal energy of the ideal monoatomic gas is U = 3/2RT and Cv = dU/dT
Differentiating U with respect to T, we have
= d(3/2RT)/dT
= 3R/2
ii. Cp - Molar heat capacity at constant pressure
Cp = Cv + R
substituting Cv into the equation, we have
Cp = 3R/2 + R
taking L.C.M
Cp = (3R + 2R)/2
Cp = 5R/2
When using the max out method to determine muscular strength, you must first do a warm-up set and a complete set before attempting your one rep max.
Answer:
True
Explanation:
I took the quiz and got it right.
TRUST
The "max out" method, also known as the "1RM" (One Repetition Maximum) method, is commonly used in strength training to determine the maximum amount of weight an individual can lift for a particular exercise.
The purpose of this method is to assess muscular strength accurately. While it is essential to perform warm-up sets to prepare the body for intense lifting, the process of determining the 1RM involves a specific protocol:
Warm-up Sets: Before attempting the 1RM, it is crucial to warm up the muscles and joints properly. Warm-up sets are typically performed with lighter weights and higher repetitions to gradually prepare the body for the heavier load.
Complete Sets: After the warm-up sets, the individual performs one or more "complete sets" with progressively heavier weights, but not at maximal effort. These sets help acclimate the body to heavier loads and prepare the nervous system for the upcoming maximal lift.
1RM Attempt: Once adequately warmed up and prepared, the individual makes an attempt to lift the heaviest weight possible for one repetition. It is essential to have a spotter or a qualified trainer to ensure safety during this maximal effort lift.
Rest: After the 1RM attempt, it is essential to allow sufficient rest and recovery, as attempting maximal lifts can be physically and mentally demanding.
It's important to note that determining 1RM carries a higher risk of injury compared to typical strength training. It's best to perform 1RM assessments under the guidance of a qualified trainer or coach who can provide proper instruction and ensure safety throughout the process. Additionally, the 1RM should be assessed periodically, as it can change over time with training and adaptation.
To know more about "max out" method here
https://brainly.com/question/29795224
#SPJ2
A train increases speed from 10 m/s to 20 m/s. What is the average speed while increasing the speed? And how far dies it travel while increasing the speed?
Explanation:
average speed =(first velocity + second velocity)/2
=(10 +20)/2=15m/s
distance=average speed × time
= 15 × t ( but time not given)
I need help
please help me with this
Par is the expected number of strokes that it should take you to make it to the target in golf. O True O False
Mrs. Paul and Dr. Mykannen ride a tandem bike on the beach. They ride along the beach for about 455 meters. Their final velocity is 5.50 m/s. How long did they ride for?
Answer:
Time = 80.91 seconds
Explanation:
Given the following data;
Velocity = 5.50 m/s.
Distance = 445 meters
To find the time;
Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.
Mathematically, velocity is given by the equation;
[tex]Velocity = \frac{distance}{time}[/tex]
Substituting into the formula, we have;
5.5 = 445/time
Time = 445/5.5
Time = 80.91 seconds
What is intertia? Explain.
Answer:
property of matter by which it continues in its existing state of rest or uniform motion in a straight line, unless that state is changed by an external force.
Answer:
Law of inertia, also called Newton's first law, postulate in physics that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.
Hope this answer is right!
Một dây dẫn đặt trong không khí có dòng điện I = 12A chạy qua, được gấp thành hình vuông cạnh a = 10cm. Xác định vectơ cường độ từ trường tại tâm O của hình vuông.
Answer:
The net magnetic field ta the center of square is[tex]1.36\times10^{-4} T[/tex].
Explanation:
Current, I = 12 A , side ,a = 10 cm = 0.1 m
Let the magnetic field due to the one side is B.
The magnetic field is given by
[tex]B = \frac{\mu o}{4\pi}\times \frac{I}{r}\times \left (Sin A +Sin B \right )\\\\B = 10^{-7}\times \frac{12}{0.05}\times \left ( sin 45 + sin 45 \right )\\\\B = 3.4\times 10^{-5} T[/tex]
Net magnetic field at the center of the square is
B' = 4 B
[tex]B'= 4\times 3.4\times 10^{-5}\\\\B' = 1.36\times10^{-4} T[/tex]
Impulse is defined as a change in what?
a. Velocity
b. Direction
c. Inertia
d. Momentum
A 4.04 kg block slides down a smooth, frictionless plane having an inclination of 30◦. The acceleration of gravity is 9.8 m/s^2. The acceleration of the plane is 4.9
What is the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline?
Answer in units of N.
Answer:
Explanation:
What a lot of words to solve such a simple problem! The perpendicular force is the one that is pushing straight down on the plane. There is no side to side movement here or friction acting on this dimension at all. Perpendicular force is the same as the weight of the block. That's it! Perpendicular force is also normal force which is the same thing as weight:
w = mg so
w = (4.04)(9.8) and
w = 4.0 × 10¹ N
The magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N
The given parameter are:
mass M = 4.04 kg
Angle of inclination = 30 degree
Acceleration due to gravity = 9.8 m/s^s
To calculate the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the plane, The force will be the weight of the block which is equal to the normal reaction.
Normal N = mgcosФ
N = 4.04 x 9.8 x cos30
N = 34.28 Newtons
At all point in the plane, the magnitude of the perpendicular force that the block exerts on the surface of the plane will be the same.
Therefore, the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N
Learn more here : https://brainly.com/question/23944424
While driving in your car you notice that your car's speedometer is not working, thus being a clever physics student you deduce the speed of the car from its rev meter. If the radius of the car is 35 cm and the rev meter reading is 800 rpm. What is the linear velocity of the car?
Answer:
105571.2 m/s
Explanation:
Using the formula connecting linear and angular velocity;
V = rω
r = radius of the circular path
ω = angular velocity
Since
1 rpm = 2π60 rad/s
800 rpm = 800 * 2π60 rad/s = 301632 rad/s
Substituting values;
V = 35/100 * 301632 rad/s
V= 105571.2 m/s
Escriba la cantidad que representan los siguientes expresiones, dada en
notación cientifica.
a) 7.1 x 10
6) 2.3 x 103
C) 1.56 10
d) 4. 19. 4. 104
Answer:
Comencemos con la primera:
si tenemos algo como:
7.1*10^n
Simplemente lo que tenemos que hacer es:
si n es positivo, movemos n veces el punto para la derecha, si no tenemos dígitos, completamos con ceros.
si n es negativo, movemos n veces el punto a la izquierda.
a) 7.1*10
aca tenemos n = 1
entonces movemos una vez el punto a la derecha:
7.1*10 = 71. = 71
b) 2.3*10^3
aca n = 3, entonces movemos el punto 3 veces a la derecha:
2.3*10^3 = 23__.
Tenemos dos huecos ahí, los cuales serán completados con ceros, entonces:
2.3*10^3 = 2,300. = 2,300
c) 1.56*10
n = 1, entonces movemos el punto una vez a la derecha:
1.56*10 = 15.6
d) 4.10^4
acá tenemos n = 4
entonces movemos el punto 4 veces a la derecha, recordar que debemos completar con ceros:
4.10^4 = 40,000. = 40,000
What is the slope of the line plotted below?
Answer:
To find the slope, we need to have co-ordinates of atleast 2 points lying on the line.
In this case, the 2 points are
(-3,1) and (2,-2)
To find the gradient we put in the following rule :
Rise / Run = (y2 - y1) / (x2-x1) = (-2-1) / (2+3) = -3 /5
Explanation:
A student fully stretches a spring. Which of these energy pie charts represents the energy in the spring?
Answer:
[tex]U_x = \frac{1}{2} kx^2[/tex]
Explanation:
Find the image uploaded for the chart.
The energy stored in a stretched elastic material is known as elastic potential energy. Mathematically this energy is expressed as follows;
[tex]U_x = \frac{1}{2} fx\\\\where ;\\\\f = kx\\\\U_x = \frac{1}{2}kx^2[/tex]
The terms are defined as follows;
f is the load applied to the elastic material (N)
k is the spring constant (N/m)
x is the extension of the material (m)
Ux is the elastic potential energy (J)
measure the diameter of a thin wire using only a ruler and a test tube
Answer:
The screw gauge is an instrument used for measuring accurately the diameter of a thin wire or the thickness of a sheet of metal. It consists of a U-shaped frame fitted with a screwed spindle which is attached to a thimble.
Explanation:
Measure the length of the coil with the help of a meter scale. The thickness of the wire can be found by dividing the length of the coil by the number of turns. Measure the diameter with callipers. Place an electrical wire between the jaws of a set of Vernier callipers. Slide the movable jaw around the cable without compressing the insulation and read the measurement where the line from the moving indicator meets the stationary scale for a diameter.
help please!!
From the following images shown, classify the interactions that occur and say between which bodies, according to the following criteria:
a) Contact forces
b) Non-contact forces
Answer:
B= 4 A=5
Explanation:
When you heat water on a stove, how does its energy change?
Answer:
tthe body of what it is supplied in its temperature rises