The products of the reaction of OCH2CH2OH with excess HBr under heat are: OCH2CH2Br (2-bromoethanol) and BrCH2CH2OH (1-bromo-1-propanol)
The mechanism for the reaction of OCH2CH2OH with excess HBr under heat is a multi-step process that involves the formation of a carbocation intermediate. Step 1: Protonation of the oxygen atom in OCH2CH2OH by HBr to form a good leaving group (OH) and a carbocation intermediate.
Step 2: Bromine atom from HBr attacks the positively charged carbon of the carbocation intermediate to form a covalent bond, resulting in the formation of intermediate compound.Step 3: Deprotonation of the intermediate compound by the remaining hydroxyl group to give OCH2CH2Br (2-bromoethanol) and HBr
Step 4: the HBr molecule from the step 3 could protonate another molecule of OCH2CH2OH and repeat the step 1 to 3 to form BrCH2CH2Br (1-bromo-1-propanol) as second product.
Overall, the reaction is an electrophilic substitution reaction, with HBr as the electrophile and the oxygen atom of the alcohol as the nucleophile.
Learn more about compound here:
https://brainly.com/question/3648919
#SPJ4
if the density of hydrogen is 0.090 g l and its rate of diffusion is 5.93 times that of chlorine, what is the density of chlorine
The density of chlorine will be 3.163 g/L.
The mass of a substance per unit of volume is its density. According to Graham's law, a gas's rate of effusion is inversely proportional to its square root density. When a material's particles are concentrated in a low area, they tend to travel to the place where the concentration is highest. When we use perfume or a scented spray in one area of the room and subsequently can smell it throughout the entire space, that is a simple illustration of this process.
rate1 = H2 = 5.93
rate2 = Cl2 = 1
The molecular weight of H2 = 2.016
The molecular weight of Cl2 = x.
By Graham's Law:
5.93 / 1 = x / 2.016
35.1649 = x / 2.016
x = 70.89 g/mol
Determine gas density by volume
70.89 g / 22.414 L = 3.163 g/L
Learn more about Density
brainly.com/question/28929608
#SPJ4
What other factors of weather and climate are affected by elevation?
Answer:
Wind, Rain and Snow
Consequently, winds are stronger at higher elevations. Colder temperatures at higher elevations also create precipitation, because cold air can't hold as much moisture as warm air. Moisture condenses out of the air as snow and ice, and it falls back to the ground.
The factors that affect the weather and climate are latitude, altitude, wind, and distance from the sea.
What is climate?Climate can be described as the long-term weather pattern in an area, averaged over 30 years. Climate is the mean as well as the variability of meteorological variables over months to millions of years.
Some of the meteorological variables that are used to measure are temperature, atmospheric pressure, humidity, wind, and precipitation. The climate can be defined as the state of the components of the climate system, including the atmosphere, cryosphere, lithosphere, and biosphere, and the interactions between them.
The climate is affected by its latitude, terrain, altitude, land use, and water bodies and their currents. Climates can be classified based on the average and typical variables, most temperature, and precipitation. It is used in studying of the biological diversity and how climate change affects it.
Learn more about climate, here:
https://brainly.com/question/10440860
#SPJ2
Does reactivity increase or decrease from left to right among elements in a period?
Period. As you move from either the left to the right, reactivity rises. Group reactivity diminishes from top to bottom.
As you move from left toward right across a period, responsiveness declines. Higher reactivity is caused by the ease with which electrons can be given or snatched away as you move further to the left as well as along the periodic chart.
This is because the size of both the atomic radius expands as the quantity of electronic energy does. reducing the attractiveness of other elements' valence electrons lowers reactivity.
It happens because there are more valence shells and less interaction among valence pairs of electrons. Consequently, the propensity to take electrons from some of the other atoms declines. Atoms get more electronegative as they move through a period.
To know more about reactivity
https://brainly.com/question/29819445
#SPJ4
Which one of the following combinations of names and formulas of ions is incorrect? a. CIO 3 chlorate b. HCO 3 hydrogen carbonate c. NO 2 nitrate
Nitrate NO 2 It is inappropriate to use one of the following ions' names and formulas.
Chlorate's purpose is unknown.Herbicides, explosives, defoliants, paper, leather, dyes, matches, and inks are all made from it. It's also used to make cosmetics and medications. An inorganic salt of sodium with the counter-ion chlorate is known as sodium chlorate. It serves as both a herbicide and an oxidizing agent for bleaching paper.
Where can you find chlorate?Chlorate, an anion, can enter drinking water through a number of different causes, such as the use of hypochlorite or chlorine dioxide as disinfectants, the oxidation of hypochlorite or chlorite by ozone, and pesticide runoff or paper mill discharges that contaminate the source water.
To know more about chlorate visit:
https://brainly.com/question/5923839
#SPJ4
Read the following chemical equation.
Cl2 (g) + K+ Br− → K+ Cl− + Br2 (g)
What most likely happens during this reaction? (5 points)
Potassium loses an electron.
Potassium gains an electron.
Bromine loses an electron.
Bromine gains an electron.
In the chemical equation,Cl₂ (g) + K+ Br− → K+ Cl− + Br₂ (g) bromine looses an electron in the reaction.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
what are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?
Dimensional evaluation makes use of conversion elements to use the unit in an quantity into an equal amount expressed with a exclusive unit.
For example, a conversion aspect might be used to transform meters to centimeters. Dimensional evaluation (additionally referred to as aspect label approach or unit evaluation) is used to transform from one set of gadgets to another. This approach is used for each simple (ft to inches) and complex (g/cm3 to kg/gallon) conversions and makes use of relationships or conversion elements among exclusive units of gadgets. A conversion ratio (or unit aspect) is a ratio same to one. This ratio includes the names of the gadgets for use withinside the conversion. It may be used for conversions in the English and Metric Systems, in addition to for conversions among the systems. The conversion unit is primarily based totally upon the idea of equal values.
To learn more about conversion unit check the link below:
https://brainly.com/question/28036423
#SPJ4
3. A student placed artificial cells, each containing a 25% sugar solution, into three different beakers containing sugar solution which varied in concentration from 0% to 25%. The setups are shown below. The student collected data on the mass of each artificial cell. The student predicted that the cell in the beaker with 25% sugar solution would have the greatest change in mass after 24 hours. Would his prediction be correct? Support your answer.
The student collected data on the mass of each artificial cell. The student predicted that the cell in the beaker with 25% sugar solution would have the greatest change in mass after 24 hours. The student's prediction would be correct.
Why would the prediction of the experiment be correct?The artificial cell placed in the beaker with 25% sugar solution would likely have the greatest change in mass after 24 hours because of osmosis.
Osmosis is the movement of water across a semi-permeable membrane from an area of high water concentration to an area of low water concentration. In this case, the artificial cell has a semi-permeable membrane that allows water to pass through, but not sugar.
The 25% sugar solution in the beaker is less concentrated than the sugar solution inside the artificial cell, so water will move from the beaker into the cell, causing the cell to swell and increase in mass.
On the other hand, the artificial cells in the beakers with 0% and 12.5% sugar solutions will have less of a change in mass as the solution outside of the cell is more concentrated than inside the cell.
Therefore, the correct answer is as given above
learn more about osmosis: https://brainly.com/question/2811191
#SPJ1
Why is it important to recycle electronic waste?
It saves energy, minimizes air and water pollution, cuts greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and otherwise decreased its trash by 62% and reduced landfill by 35%.
What is recycle?It saves energy, minimizes air and water pollution, cuts greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and otherwise decreased its trash by 62% and reduced landfill by 35%. The process of transforming waste resources into new materials and things is known as recycling. This notion frequently includes the recovery of energy from waste materials. The capacity of a material to regain the attributes it had in its original form determines its recyclability. Recycling is the collection and processing of items that would otherwise be discarded as waste in order to create new goods. Recycling may help your town, economy, and environment.
Here,
It saves energy, decreases air and water pollution, lowers greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and avoided landfill by 62% and 35%, respectively.
To know more about recycle,
https://brainly.com/question/26807121
#SPJ4
When you go to the doctor for an illness, the doctor asks you how you feel. You describe all your symptoms. Then, the doctor makes a hypothesis about which organ system is having problems. Read each set of symptoms below. Then, match each set of symptoms with the the appropriate organ system.
stomach ache, gassy, ___________________________
no appetite
sneezing all the time, runny nose, __________________________---
trouble breathing, coughing
having a very hard time remembering people's
names, feeling sad and anxious _______________________
seem to be catching every disease that comes around,
taking a long time to get better ________________________-
1. Respiratory System
2.Nervous System
3.Immune System
4.Digestive System
Stomach ache, gassy ,no appetite is related to problems with digestive tract while sneezing all the time, runny nose is related to respiratory system while having a very hard time remembering people's is related to nervous system while seeming to be catching every disease that comes around,taking a long time to get better is related to immune system.
What is digestive tract?
It consists of the gastrointestinal tract along with the accessory organs which are present in digestion process . It involves the breakdown of complex food into smaller components which can be easily assimilated and absorbed by the body.
The digestion process has 3 phases: cephalic phase , gastric phase and intestinal phase.Cephalic phase begins with secretion of gastric juices from gastric glands in response to sight and smell of food.It involves chewing and chemical breakdown of food by the action of digestive enzymes ,saliva in the mouth contain enzymes like lipase and amylase which are secreted by the salivary and serous glands present on the tongue.
Learn more about digestive tract,here:
https://brainly.com/question/28163067
#SPJ1
A team of scientists claim that they have discovered a new experimental
method for determining atomic mass. Which of the following is necessary for
the claim to be considered valid?
A. The atomic mass of an element according to the new method
must be greater than its previous measurement.
B. The method must work for all isotopes.
C. The atomic mass of an element according to the new method
must be less than its previous measurement.
OD. Another team of scientists must be able to replicate the results of
the experiment.
SUBMIT
For a team of scientists to claim that they have discovered a new experimental method for determining atomic mass, their claim is to be considered valid only if another team of scientists is able to replicate the results of the experiment.
In order for a scientific claim to be considered valid, it is important that the results of the experiment can be replicated by other researchers.
Replication means that other scientists should be able to obtain the same results using the same methods. This helps to ensure that the results are accurate and reliable, rather than being a fluke or an error.
Without the ability to replicate the results, it is difficult to have confidence in the validity of the claim, as it may be due to uncontrolled variables or other factors that cannot be reproduced. Ensuring that results are replicable is an important part of the scientific process and helps to build a strong foundation of knowledge.
Learn more about atomic mass:
https://brainly.com/question/17067547
If you need 18.9 grams of HCl for a reaction, and you have a 1.5 M solution of HCl, how many mL of this solution should you use
If we need 18.9 grams of HCl for a reaction, and we have a 1.5 M solution of HCl, the mL of this solution should we use is 345.3 mL.
Given that :
mass of the HCl = 18.9 grams.
molar mass of the HCl = 36.45 g/mol
moles of the HCl = mass / molar mass
= 18.9 / 36.45
= 0.518 mol
the molarity of the HCl = 1.5 M
The molarity is given as:
molarity = moles / volumes
volume in L = moles / molarity
= 0.518 / 1.5
= 0.3453 L
= 345.3 mL
Thus, the volume is 345.3 mL.
To learn more about molarity here
https://brainly.com/question/2817451
#SPJ4
0.25 moles of a gas at 760 mmHg and 298 K are contained in a 6.1 L bottle. What is the pressure of the system if the amount of gas in the bottle is reduced to 0.13 mole and the temperature is reduced to 100 K?
The pressure in the container can be calculated using Ideal gas law. The pressure of the gas at the reduced temperature will be 0.17 atm.
What is ideal gas law?Ideal gas law states the relation between volume, pressure, temperature and number of moles of a gas as written below:
PV = nRT.
Where R is the universal gas constant equal to 0.082 L atm/ K mol.
Given , T = 100 K
n = 0.13 moles
V = 6.1 L
Then, P = nRT/ V
The pressure of the gas at 100 K with 0.13 mole is calculated as follows:
P = (0.13 mole × 100 K × 0.082 L atm/ K mol) / 6.1 L = 0.17 atm.
Therefore, the pressure of the gas is 0.17 atm.
Find more on ideal gas law:
https://brainly.com/question/13821925
#SPJ1
Calculate the number of molecules in 9.03 liters of carbon dioxide gas at standard temperature and pressure.
9.03 liters of carbon dioxide gas would contain 0.40 moles of carbon dioxide molecules. Since 1 mole of any gas contains 6.02 x 10^23 molecules, the number of molecules of carbon dioxide gas in 9.03 liters of carbon dioxide gas at STP would be 2.41 x 10^23 molecules.
What is molecules?Molecules are the smallest units of matter that can exist by themselves. They are composed of two or more atoms that are held together by chemical bonds. Molecules can be found in the air we breathe, the water we drink, and the food we eat. They can also be found in living organisms, like plants and animals. Molecules can be made of a variety of different atoms, such as oxygen, carbon, nitrogen, and hydrogen.
To learn more about molecules
https://brainly.com/question/26044300
#SPJ1
Almost all of the oxygen (O2) one consumes in breathing is converted to:
a. acetyl-CoA.
b. carbon dioxide (CO2).
c. carbon monoxide and then to carbon dioxide.
d. none of the above.
e. water.
Almost all of the oxygen (O2) one consumes in breathing is converted to: b. carbon dioxide (CO2).
When we breathe in oxygen, it is used in cellular respiration, which is the process by which our body converts glucose and oxygen into energy in the form of ATP. In the process, the oxygen is combined with the hydrogen atoms from glucose to form water, and the carbon atoms from glucose are converted to carbon dioxide (CO2) as a waste product. Therefore, almost all of the oxygen that one consumes in breathing is converted to carbon dioxide (CO2).Breathing is the process by which an organism takes in oxygen and expels carbon dioxide. In humans and other mammals, this process is accomplished through the respiratory system, which includes the nose, trachea, bronchi, and lungs. When we inhale, air is drawn into the lungs through the nose or mouth, passing through the trachea and bronchi before reaching the alveoli, which are small air sacs in the lungs where gas exchange occurs.
To learn more about oxygen (O2) here:
https://brainly.com/question/9714175
#SPJ4
The temperature inside a pressure cooker is 117°C. Calculate the vapor pressure of water inside the pressure cooker. What would be the temperature inside the pressure cooker if the vapor pressure of water was 2.85 atm?
The vapor pressure of water at its boiling point 100°C is 1 atm. Then the pressure at 117°C is 1.17 atm and the temperature of water at a pressure of 2.85 atm is 285°C.
What is boiling point ?Boiling point of a substance is the temperature at which it converts from liquid state to vapor state. At this temperature the vapor pressure of water vapor is equal to the atmospheric pressure that is 1 atm .
The temperature-pressure relation is written as:
P1 /T1 = P2/ T2
Now, the pressure inside the cooker at a temperature of 117°C is calculated as:
(1 atm × 117 °C) / 100 °C = 1.17 atm.
Thus, pressure at 117 °C is 1.17 atm. Then, If the pressure is 2.85 atm, then the temperature of water inside the pressure cooker is calculated as:
(2.85 atm × 117 °C) / 1.17 = 285 °C
Therefore, the temperature at 2.85 atm is 285 °C.
Find more on boiling point:
https://brainly.com/question/2153588
#SPJ1
For the reaction H2(g) + Cl2(g) 2HCl(g), Kc = 1.22 1033 at a temperature of 301 K. What is Kp at this temperature? A) 1.22 1033 B) 3.01 1034 C) 4.93 1031 D) 7.43 1035 E) 2.00 1030
The reaction would have a Kp of 3.01 * 10^34. Option B
What is the Kp of the reaction?We know that the equilibrium constant of the reaction is the value that would be able to show us how much of the reactants that have been converted to products when the reaction has attained the point of equilibrium at a given temperature.
As such we would have that;
Kp= Kc (RT)^Δn
Kp = ?
Kc = 1.22 * 10^ 33
R = 0.082
T = 301 K
Then we have that;
Kp = 1.22 * 10^ 33(0.082 * 301)^ 1
Kp = 3.01 * 10^34
Learn more about Kp:https://brainly.com/question/22074421
#SPJ1
A sample of fluorine gas at STP contains 4.088x10^24 atoms. What is the volume in liters of the sample?
Record your answer to 1 decimal place. Do not put units on your answer.
According to the concept of Avogadro's number and STP conditions volume in liters of the sample is 15,388.7.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.
Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number
Number of moles is obtained as, number of atoms/Avogadro's number=4.088×10²⁴/6.023×10²³=6.78 moles on substitution in formula of PV=nRT=V=6.78×8.314×273/1=15,388.7 liters.
Thus, the volume is 15,388.7 liters of the sample.
Learn more about Avogadro's number,here:
https://brainly.com/question/11907018
#SPJ1
What is the group number of the element in the periodic table?
a
1
b
2
c
13
d
15
The group number of the element in the periodic table is equal to 15 as it has five valence electrons. Therefore, .option D is correct.
What is a valence electron?Valence electrons can be explained as the electrons occupying the outer shell of an atom while the electrons placed in the inner shell are known as core electrons. Lewis structures of the elements can be helpful to calculate valence electrons and know the types of bonds.
Valence electrons can be filled in different shells, causing interaction between atoms and leading to the formation of chemical bonds.
The five elements have five electrons in their valence shell therefore it belongs to nitrogen family. The group number can be calculated as 10 + 5 = 15
Learn more about valence electrons, here:
brainly.com/question/18612412
#SPJ1
A sample of gas has a pressure of 3.4 atm at 300 K in a container with a fixed volume. What will be the pressure (in atm) of this same sample of gas if the temperature is changed to 402 K
If the temperature is raised to 402 K, the pressure (in atm) of this given sample of gas will be 4.5.
Given,
Pressure P1 = 3.4 atm
Temperature T1 = 300 K
⇒ T2 = 402 K
⇒ P2 = ?
⇒ P1/T1 = P2/T2
⇒ 3.4/300 = P2/402
⇒ P2 = 4.5
⇒ Pressure = 4.5 atm
An atmosphere (atm) is a measuring unit that corresponds to the average air sea level pressure at 15 degrees Celsius (59 degrees Fahrenheit). One atmosphere consists of 1,013 millibars of pressure, or 760 millimetres (29.92 inches) of mercury.
Pressure is defined as the force exerted by one material on another per unit area. The force also that gas exerts on the container limits is defined as gas pressure. Gas molecules travel at random over the specified volume. They clash with the surface as well as each other during this movement.
To know more about the Pressure, here
https://brainly.com/question/2060803
#SPJ4
A gas at 110 °C exerts a pressure of 225 torr in a sealed container. The temperature drops to 65 °C. What is the pressure of the gas at the cooler temperature?
According to Gay-Lussac's law, the pressure of the gas at the cooler temperature is 132.95 torr.
What is Gay-Lussac's law?It is defined as a gas law which states that the pressure which is exerted by the gas directly varies with its temperature and at a constant volume.The law was proposed by Joseph Gay-Lussac in the year 1808.
The pressure of the gas at constant volume reduces constantly as it is cooled till it undergoes condensation .
It is given as, P₁/T₁=P₂/T₂ , therefore P₂=225×65/110=132.95 torr.
Therefore,the pressure of the gas at the cooler temperature is 132.95 torr.
Learn more about Gay-Lussac's law,here:
https://brainly.com/question/2683502
#SPJ1
Show all the work and don't forget to show scientific notation!
In scientific notation, the result of multiplying an integer between 1 and 10 by a power of 10 is written.For instance, 650,000,000 can be represented as 6.5 108 in scientific notation.
Which four guidelines govern scientific notation?Always set the base to 10. The exponent must be an integer that is non-zero, therefore it can either be positive or negative. The absolute value of the coefficient must be less than ten and more than one.
What sort of notation would that be?a system of symbols for designating unique items. Example: In mathematics, the symbol "" stands for "infinity." There are many notations in mathematics.
To know more about scientific notation visit:-
https://brainly.com/question/18073768
#SPJ1
1. What is 16.2 kPa in atmospheres?
According to the question,16.2 kPa is equal to 0.16 atmospheres.
What is the atmospheres?
The atmosphere is the thin layer of gases and particles that surrounds Earth, protecting us from the sun’s harmful radiation and maintaining the planet’s temperature. It is composed of 78% nitrogen, 21% oxygen, 0.9% argon, 0.03% carbon dioxide, and trace amounts of other gases, as well as water vapour, dust, and other particles. The atmosphere works by trapping heat from the sun, allowing temperatures to remain relatively stable throughout the world. It also helps regulate the water cycle, ensuring that water remains available for life on Earth. The atmosphere also helps protect us from environmental hazards like ozone depletion and acid rain. In addition, it is home to many species of birds, insects, and other animals. Without the atmosphere, Earth would be a barren, lifeless planet.
To learn more about atmospheres visit:
https://brainly.com/question/28310375
#SPJ1
what chemical is 60% of your food made up of? what 3 elements make up this chemical?
Carbohydrates, is 60% of what your food made up of and it is composed of carbon, hydrogen and oxygen.
What are carbohydrates?Carbohydrates are known to be the group of organic compounds that are an important source of energy for the body. They are composed of carbon, hydrogen and oxygen and are classified as simple or complex depending on their chemical structure. Monosaccharides, also called monosaccharides, include glucose, fructose, and galactose, and are found in foods such as fruit, table sugar, and honey. Complex carbohydrates, also called polysaccharides, contain starches and fibers and are found in foods such as grains, legumes, and vegetables. Carbohydrates play an important role in providing energy for the body, maintaining proper brain and nervous system function, and supporting tissue growth and repair.
To know more about Carbohydrates, visit:
https://brainly.com/question/29775112
#SPJ4
PLS HELP ME WITH QUESTION 5 I NEED HELP ASAP
Answer:
30.5%
Explanation:
How does the volume change if 50mL of a gas material is cooled from 30\deg C to 5\deg C ?
50mL
46mL
100mL
56mL
The final volume can be determined using Charles's law. The volume of gas at 5 degree Celsius will be 8.3 ml.
What is Charles's law of gases ?According to Charles's law, at constant pressure, the volume of a gas is directly proportional to the temperature.
Hence, V/T = constant.
Let, V1 and T1 be the initial volume and temperature and V2, T2 be the final quantities.
then, V1/T1 = V2/T2.
V2 = V1 T2/ T1
Given, V1 = 50 ml
T1 = 30 °C
T2 = 5 °C
Then, V2 = 50 ml × 5 °C /30 °C = 8.3 ml
Therefore, the volume of the gas reduces to 8.3 ml.
Find more on Charles's law:
https://brainly.com/question/16927784
#SPJ1
How i an electron orbital different from an orbit what do the hape of the orbital hown in Figure 14
An orbit is a set route along which electrons spin around the nucleus of an atom, whereas an orbital is a region where the chance of finding any electron is calculated.
What is electron?The electron is a subatomic particle with an initial electric charge of -1. Electrons are the first generation of the lepton particle family and are often regarded as elementary particles due to the lack of known components or substructure. An electron is a negatively charged subatomic particle that can be attached to or released from an atom (not bound). A bound electron is one of the three major kinds of particles within an atom, the other two being protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons.
Here,
An orbit is a fixed path along which electrons spin around an atom's nucleus, whereas an orbital is an area where the probability of finding any electron is determined.
To know about electron,
https://brainly.com/question/12001116
#SPJ4
A 0.95 M solution of 10.0 mL Al(OH)3 is neutralized using a 2 M solution of H2SO4. How much H2SO4 was needed
H2SO4 has a molecular weight of 98 g/mole. 98% concentrated sulfuric with a density of 1.84 g/mL is the usual source.
We would need 98 g for a 1 M solution in 1 L, but because this is for 500 mL, just 49 g of H2SO4 will be needed. Common concentrations of sulfuric acid are 78, 93, or 98 percent. Pure anhydrous sulfuric acid does not exist in nature due to its affinity for water. 35% sulfuric acid Fertilizers like ammonium sulfate and super-phosphate of lime are produced using solution. In the production of hydrochloric acid, sulfate salts, synthetic detergents, dyes & pigments, and medications, it is frequently employed.
Learn more about molecular here-
https://brainly.com/question/14614762
#SPJ4
What is the mass in grams of 6.02 x10 23 N 2 molecules?
The mass in grams of 6.02×[tex]10^{23}[/tex] N2 molecules is 9.24×[tex]10^{23}[/tex] gram.
This is because each molecule of N2 is composed of two atoms of nitrogen, which each have a mass of 14.0067 grams.
Thus, the total mass of 6.022×[tex]10^{23}[/tex] N2 molecules is calculated by multiplying the number of molecules by the mass of each molecule, which is 28.0134 grams.
14.0067×2=28.013grams
This gives us a total mass of
6.02×1023×28.0134=9.24×[tex]10^{23}[/tex] grams
Molar mass:
Molar mass is the mass of one mole of a substance. It is expressed in grams per mole (g/mol). It is calculated by adding up the atomic weights of all the atoms in a molecule or formula unit of a compound. It is a useful measure when calculating the mass of a substance, or when calculating stoichiometric ratios in a chemical reaction.
Therefore the mass of 6.022×[tex]10^{23}[/tex] N2 molecule is 9.24×[tex]10^{23}[/tex]grams.
Learn more about molar mass:
https://brainly.com/question/25274322
#SPJ4
The solid xy decomposes into gaseous x and y: xy(s) m x(g) + y(g) kp = 4. 1 (at 0 °c) if the reaction is carried out in a 22. 4 l container, which initial amounts of x and y will result in the formation of solid xy?
The initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.
What is initial amount?The initial amount is the starting point for any financial transaction.
In order to calculate the initial amounts of x and y that will result in the formation of solid xy, the following equation must be used:
nx = ny * (4.1/kp)
where nx and ny are the moles of x and y, respectively, and kp is the equilibrium constant of the reaction.
Given the information provided, we can calculate the moles of x and y:
nx = ny * (4.1/4.1) = ny
ny = (22.4 L * 1 mol/22.4 L) = 1 mol
Therefore, nx = 1 mol and ny = 1 mol.
This means that if the reaction is carried out in a 22.4 L container, the initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.
To learn more about initial amount
https://brainly.com/question/26988374
#SPJ4
A binary covalent bond exists between
A. Any element
B. 2 nonmetals
C. 1met and 1 nonmetal
D. 2 metals
A binary covalent bond exists between 2 nonmetals.
These compounds are termed similarly to binary ionic compounds even though they don't contain ions.
These guidelines apply to the nomenclature of binary covalent compounds:
The complete name of the first element in the formula is given first.
The name of the second element refers to it as an anion.
Prefixes are employed to indicate the number of atoms in a compound. The prefix mono- is dropped if the first element only has one atom.
For instance, carbon monoxide is the name given to CO rather than monocarbon monoxide.
To look more about covalent bond click here
brainly.com/question/10777799
#SPJ4