) Water flows through the system shown below. Estimate the volumetric flow rate if friction
losses are negligible.

Explanation:

this is the answer to the questions

σ = F/A = F/ (πD²/4) = 20000 / (π0.10²/4) = 2.55 MN/m²

Answer:

from someone watching the bulldozer from the cab of the truck or from elsewhere on the flatbed.

Explanation:

Hi there!

a.

We can use the initial conditions to solve for w₀.

It is given that:

[tex]\frac{d\theta}{dt} = w_0e^{-\sigma t}[/tex]

We are given that at t = 0, ω =  3.7 rad/sec. We can plug this into the equation:

[tex]\omega(0)= \omega_0e^{-\sigma (0)}\\\\3.7 = \omega_0 (1)\\\\\omega_0 = \boxed{3.7 rad/sec}[/tex]

Now, we can solve for sigma using the other given condition:

[tex]2 = 3.7e^{-\sigma (8.6)}\\\\.541 = e^{-\sigma (8.6)}\\\\ln(.541) = -\sigma (8.6)\\\\\sigma = \frac{ln(.541)}{-8.6} = \boxed{0.0714s^{-1}}[/tex]

b.

The angular acceleration is the DERIVATIVE of the angular velocity function, so:

[tex]\alpha(t) = \frac{d\omega}{dt} = -\sigma\omega_0e^{-\sigma t}\\\\\alpha(t) = -(0.0714)(3.7)e^{-(0.0714) (3)}\\\\\alpha(t) = \boxed{-0.213 rad\sec^2}[/tex]

c.

The angular displacement is the INTEGRAL of the angular velocity function.

[tex]\theta (t) = \int\limits^{t_2}_{t_1} {\omega(t)} \, dt\\\\\theta(t) = \int\limits^{2.5}_{0} {\omega_0e^{-\sigma t}dt\\\\[/tex]

[tex]\theta(t) = -\frac{\omega_0}{\sigma}e^{-\sigma t}\left \| {{t_2=2.5} \atop {t_1=0}} \right.[/tex]

[tex]\theta = -\frac{3.7}{0.0714}e^{-0.0714 t}\left \| {{t_2=2.5} \atop {t_1=0}} \right. \\\\\theta= -\frac{3.7}{0.0714}e^{-0.0714 (2.5)} + \frac{3.7}{0.0714}e^{-0.0714 (0)}[/tex]

[tex]\theta = 8.471 rad[/tex]

Convert this to rev:

[tex]8.471 rad * \frac{1 rev}{2\pi rad} = \boxed{1.348 rev}[/tex]

d.

We can begin by solving for the time necessary for the angular speed to reach 0 rad/sec.

[tex]0 = 3.7e^{-0.0714t}\\\\t = \infty[/tex]

Evaluate the improper integral:

[tex]\theta = \int\limits^{\infty}_{0} {\omega_0e^{-\sigma t}dt\\\\[/tex]

[tex]\lim_{a \to \infty} \theta = -\frac{\omega_0}{\sigma}e^{-\sigma t}\left \| {{t_2=a} \atop {t_1=0}} \right.[/tex]

[tex]\lim_{a \to \infty} \theta = -\frac{3.7}{0.0714}e^{-0.0714a} + \frac{3.7}{0.0714}e^{-0.0714(0)}\\\\ \lim_{a \to \infty} \theta = \frac{3.7}{0.0714}(1) = 51.82 rad[/tex]

Convert to rev:

[tex]51.82 rad * \frac{1rev}{2\pi rad} = \boxed{8.25 rev}[/tex]

Ice wedging, as described in the passage, is an example of mechanical

weathering.

Mechanical weathering is also known as physical weathering and it

involves the breaking of rock into smaller particles without causing changes

in the chemical properties.Mechanical weathering is usually carried through

physical processes such as freezing and thawing etc.

In this scenario, we were told that water freezes, expands and presses

against the walls of the crack thereby breaking into smaller parts which is a

physical process hence mechanical weathering being present.

Read more about Mechanical weathering on https://brainly.com/question/458304

All the three concurrent forces acting on a body will not produce equilibrium.

The given parameters:

1. 1 N, 3 N and 5 N

2. 2N, 2N and 2 N

3. 3N, 4N and 5 N

4. 4N, 4N and 5 N

Concurrent forces lie on the same plane and their line of action pass through a common point.

A body under concurrent forces is in equilibrium if the resultant of the forces on the body is zero.

[tex]\Sigma F = 0\\\\F_1 + F_2 + F_3 = 0\\\\F_1 + F_ 2 = - F_3[/tex]

where;

[tex]F_3[/tex] is the equilibrant force

First set of concurrent forces;

[tex]1 \ N \ + \ 3\ N = 4 \ N\\\\F_ 3 = 5 \ N\\\\5 \ N > 4 \ N[/tex]

Second set of concurrent forces;

[tex]2 \ N \ + \ 2 \ N = 4 \ N\\\\F_ 3 = 2 \ N\\\\4 \ N > 2 \ N[/tex]

Third set of concurrent forces;

[tex]3 \ N \ + \ 4 \ N = 7 \ N\\\\F_ 3 = 5 \ N\\\\7 \ N > 5 \ N[/tex]

Fourth set of concurrent forces;

[tex]4 \ N \ + \ 4 \ N = 8 \ N\\\\F_ 3 = 5 \ N\\\\8 \ N > 5 \ N[/tex]

Thus, we can conclude that all the three concurrent forces acting on a body will not produce equilibrium.

Learn more about concurrent forces here: https://brainly.com/question/20165540

An LED is useful because when a current passes through it, it gives out light.

An LED is useful because when a current passes through it, it gives out Light.

LED, in full light-emitting diode, in electronics, a semiconductor device that emits infrared or visible light when charged with an electric current.

A light-emitting diode (LED) emits light by applying a forward current to the pn junction of a compound semiconductor.

When forward current is passed through the light-emitting diode, carriers (electrons and holes) move. The holes in the p-type region move to the n-type region and the electrons in the n-type region move to the p-type region. The injected carriers recombine, and the energy difference before and after recombination is released as light. The emitted light depends on the energy band gap (Eg) of the compound semiconductor.

Learn more about light-emitting diode

https://brainly.com/question/12286583?referrer=searchResults

#SPJ2

Answer:D

Explanation:

R =  

V

I

=  

120 volt

0.8 ampere

=  150 ohm (Ω)

P =  V × I

=  120 volt × 0.8 ampere

=  96 watt (W)

An electric light installation  can draw Power of 96 Watt  at 120 V if it creates a current of 0.8 amps

Electric power  is the rate of electric energy transfer by an electric circuit per unit time . It is denoted by P and measured using the SI unit of power that is Watt (W)

since, Electric Power   = voltage * current

Power    = 120 V * 0.8 A

Power    = 96 Watts

An electric light installation  can draw Power of 96 Watt  at 120 V if it creates a current of 0.8 amps

learn more about Electric power  

https://brainly.com/question/16925887?referrer=searchResults

#SPJ3

Answer:

Skeletal Muscle cells

Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.

Answer:

skeletal muscle cells can have multiple nuclei

Explanation:

This is because they are formed from the fusion of embryonic myoblasts.

Answer:

Explanation:

As no altitude or mass changed, the potential energy remained constant.

The potential energy will stay the same as long as the book stays on the

table.

Kinetic energy went from zero at rest to a positive value while moving, and then returned to zero when the book was at rest again.

The kinetic energy increases as the book is pushed across the table.

Answer:

There always is an acceleration in a curvilinear motion, as the velocity vector changes, so always.

The final position of the object after 2 s is 11 m.

Motion: This can be defined as the change in position of a body.

⇒ Formula:

⇒ Where:

From the question,

⇒ Given:

⇒ Substitute these values into equation 1

Hence, The final position of the object after 2 s is 11 m

Learn more about motion here: https://brainly.com/question/15531840

Answer:

bro what.

Explanation:

... is this an actual physics question?

Blood Type O AB

Probability 0.45 0.04

Answer:

Explanation:

The net work will change the kinetic energy

W = ½mv² = ½m(at)² = ½ma²t²

W = ½(7.7)2.6²(18.5²) = 8907.3985 = 89 kJ

Answer:

Explanation:

Q1) d) A is not correct; R is correct (sort of) but is not the reason for A.

A vector may be resolved into an infinite number of components.

Breaking a projectile motion into the vertical and horizontal components is the EASIEST way to solve it because acceleration can be assumed to be constant in both directions. Zero for horizontal and g(ravity) in the vertical. However it is not the ONLY way to do it. Other ways are much more complex.

Q2) a) Both A and R are correct; R is the correct explanation of A  (sort of)

A is correct. Speed is constant in uniform circular motion.

R is correct if you call CENTRIPETAL acceleration constant. It is only constant in magnitude. The direction is always changing as the vector always points toward the center of rotation.

Answer:

inertia   .

because yes

Answer:

Change in velocity is the integral of all the differential accelerations acting over the period of acceleration.

[tex]20 = u + \int\limits^4_0 {2t} \, dt[/tex]

20 = u + t²[tex]\left \{ {{4} \atop {0}} \right.[/tex]

20 = u + 4² - 0²

20 = u + 16

u = 4 m/s

Four regions of the electromagnetic spectrum that astronomers use when observing objects in the space are the following enumerated answers.

1. First is Ultraviolet

2. Next is Infrared

3. Then the radio

4. Lastly the Visible lights.

These are the answers to the problem.

Answer:

Explanation:

Total energy is constant

E = mgh + ½mv² + Fd

At the top of the slide, all energy is potential

E = mgh + 0 + 0

At the bottom of the slide, all potential energy has converted to kinetic and work of friction.

mgh = ½mv² + W

W = mgh - ½mv²

W = 30.0[(9.81)(2.0) - ½6²]

W = 48.6 J

Answer:

17.5 N

Explanation:

→ F = (2.5 × 7.0) N

→ F = 25/10 × 7 N

→ F = 5/2 × 7 N

→ F = (5 × 7)/2 N

→ F = 35/2 N

→ F = 17.5 N towards left

Hence, 17.5 N of net force must act on the book to make it accelerate to the left.

Answer:

19.3m/s

Explanation:

Use third equation of motion

[tex]v^2-u^2=2gh[/tex]

where v is the velocity at halfway, u is the initial velocity, g is gravity (9.81m/s^2) and h is the height at which you'd want to find the velocity

insert values to get answer

[tex]v^2-0^2=2(9.81m/s^2)(38/2)\\v^2=9.81m/s^2 *38\\v^2=372.78\\v=\sqrt[]{372.78} \\v=19.3m/s[/tex]

Answer:

Explanation:

ignoring air resistance, the kinetic energy at water impact will equal the potential energy converted

½mv² = mgh

v = √(2gh)

v = √(2(9.81)2.1) = 6.4188... m/s

after impact, an impulse will result in a change of momentum.

There is a downward impulse due to gravity equal to the weight of the stone and an upward average force due to water resistance and buoyancy force.

FΔt = mΔv

(F - mg)Δt = m(vf - vi)

(F - mg) = m(vf - vi)/Δt

F = m(vf - vi)/Δt + mg

F = m((vf - vi)/Δt + g)

F = 1.05(((½(-6.4188) - -6.4188)/ 1.83) + 9.81)

F = 12.14198...

F = 12.1 N

The magnitude of the average force the stone experiences, will be 12.1 N.

Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.

The given data in the problem is;

m is the stone mass = 1.05 kg

The height is h, = 2.1 m i

The time is, t = 1.83 s

Velocity decreased by 50%.

From the law of conservation of energy the kinetic energy is equal to the potential energy;

[tex]\rm \frac{1}{2} mv^2 = mgh \\\\ v = \sqrt{2gh}\\\\ v = \sqrt{2 \times 9.81 \times 2.1 } \\\\ v= 64188 \ m/sec.[/tex]

From Newton's second law of motion, the impulsive force is equal to the change in momentum;

[tex]\rm F \triangle T = m \traingle v \\\\ (F - mg) = \frac{v_f-v_i}{\triangle t } \\\\ F = \frac{v_f-v_i}{\triangle t } + mg \\\\ F =m\frac{v_f-v_i}{\triangle t + g} \\\\ F= 12.14 98 \\\\ F=12.1 N[/tex]

Hence the magnitude of the average force the stone experiences, will be 12.1 N.

To learn more about the force refer to the link;

https://brainly.com/question/26115859

Answer:

Forces can be divided into primarily into two types of forces:

Explanation:

Answer:

A roller coasters accelerates from an initial velocity of of 6.0 m/s to a final velocity of 70 m/s over 4 seconds. What's the acceleration? Q. Acceleration only takes place when things speed up. Q. A drag racer accelerated from 0 m/s to 200 m/s in 5 s.

Explanation:

Answer:

Transverse waves oscillate perpendicular to the direction of the wave (e.g. any electromagnetic wave like radiowaves, x-rays...) whilst compressional waves oscillate in the same direction of the wave (e.g. sound waves)

Explanation:

Answer:

False, I am pretty sure.

Explanation:

Transverse waves are always characterized by particle motion being perpendicular to wave motion. ... As a sound wave moves from the lips of a speaker to the ear of a listener, particles of air vibrate back and forth in the same direction and the opposite direction of energy transport.

Answer:

Gravity can pull soil, mud, and rocks down cliffs and hillsides.

Explanation:

Gravity is responsible for erosion by flowing water and glaciers. But gravity also causes erosion directly. This type of erosion and deposition is called mass wasting.

Answer:

Explanation: