any atom is most stable when it’s outermost energy level contains
Explanation:
Atoms are at their most stable when their outermost energy level is either empty of electrons or filled with electrons. Sodium atoms have 11 electrons. Two of these are in the lowest energy level, eight are in the second energy level and then one electron is in the third energy level.
Any atom is most stable when it’s outermost energy level contains eight electrons.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13981855
#SPJ6
NO LINKS PLS!!!
AND I WILL MARK THE BRAINEST ANSWER
Answer:
(H2O)n
raduim hydroxide
hBr
carbonic acid
Explanation:
how much does it cost to fill a 100lb propane tank
Answer:
$500
Explanation:
G00gle.
Why does hydrogen contain more energy than gasoline?
Answer:
In fact, a fuel cell coupled with an electric motor is two to three is more efficient than an internal combustion engine running on gasoline.
Explanation:
Because hydrogen has a low volumetric energy density, it is stored onbaord a vehicle as a compressed gas to achieve the driving range of conventional vehicles.
Convert 0.04 HL to L.
Answer:
4 liters brainliest Idc rn
Explanation:
jk but enjoy kiddos :(
Answer:
4 liters
Explanation:
In order to get the answer you just need to multiply the volume amount by 100.
[tex]0.01 \times 100 = 1[/tex]
0.01HL = 1 L
0.01 4HL = 4L
= 4 liters
Hope this helps.
Describe how glacier mice are complete ecosystems, even though they are tiny.
GIVING BRAINIEST
Answer: The clumps, known as glacier mice, have been found to contain miniature ecosystems
Explanation: Because glaciers are in constant, if slow, motion and are frequently blasted by strong winds.
The clumps, known as glacier mice, have been found to contain miniature ecosystems. And even in freezing temperatures, scientists found, the inhabitants manage to thrive. In high winds glacier mice, which form when clumps of dust and organic debris develop a layer of moss over time, hop across vast sheets of ice.
What organisms live in glacier mice?These included springtails (small insect-like animals), water bears (also known as tardigrades, the only animals known to have survived in space), and roundworms. Globally, glacier mice are rare.
Learn more about glacier mice here: brainly.com/question/22404059
#SPJ2
NO LINKSSS PLEASE!!!
When a 1.0 gram of a salt is added to a beaker containing a solution of the salt, the salt crystals dissolve. It can be concluded that the original solution was...
Select one:
a. concentrated.
b. saturated.
c. supersaturated.
d. unsaturated.
b) unsaturated
Hope this helped you- have a good day bro cya)
how to calculate atomic mass of sodium ?(in process)
Answer:
Atomic mass of Sodium is 22.9897 u. Note that, each element may contain more isotopes, therefore this resulting atomic mass is calculated from naturally-occuring isotopes and their abundance. The unit of measure for mass is the atomic mass unit (amu). One atomic mass unit is equal to 1.66 x 10 -24 grams.
Explanation:
Someone help me with this I will make you brain
Answer:
D, took the test
Explanation:
Answer:
D: To show how using a list of examples can strengthen a claim
Hope this helps! <3
which will have a greater volume: 10 grams of liquid water or 10 grams of solid water?
A(n) ___ is a compound that dissolves in water to produce hydrogen ions in solution. A(n) ___ produces hydroxide ions. Acids have a ___ taste and bases have a ____ taste. Both acids and bases conduct ____ and are ____. A pH of ____ is neutral. A pH of 6 is ___ and a pH of 14 is a __
Answer:
see explanation
Explanation:
Question
A(n) ACID is a compound that dissolves in water to produce hydrogen ions in solution. A(n) _BASE__ URhydroxide ions. Acids have a SOUR___ taste and bases have a BITTER____ taste. Both acids and bases conduct _ELECTRICITY___ and are _REACTIVE___. A pH of7 ____ is neutral. A pH of 6 is _ACIDIC__ and a pH of 14 is a BASIC__
PLEASE HELP ASAP 100 POINTS!!!!!
Answer:
Melting
Explanation:
• A chemical change is a change that can be reversed.
Other chemical changes include;
Melting (solid to liquid)Evaporation (liquid to gas)Condensation(gas to liquid)Sublimation (solid to gas and gas to solid)[tex].[/tex]what is the chemical formula for the most common fragment of acetic acid?
Answer:
the scientific formula is C2H4O2
Explanation:
The cleavage of the compounds resulted in the fragments with varying stability. The most common fragment of acetic acid is [tex]\rm C_2H_4O_2^+[/tex].
What are the most common fragments?The common fragments in the molecular compound are the species that result in the neutral ions adn electrons with the cleavage of the bonds.
Acetic acid is a weak acid in nature, and is composed of the carbon, hydrogen and oxygen elements.
The cleavage of the species in the acetic acid spectrum resulted are, [tex]\rm [COOH^+],\;[CH_3CO^+],\;[CH_2CO^+],\;[HCO^+],\;[CO^+],\;[CH^3^+][/tex].
The species, with the highest m/z ration, has been the most common fragment of the acetic acid. The m/z ratio of the following species is given in the table attached.
From the table, the highest ratio for the stability has been found with [tex]\rm C_2H_4O_2^+[/tex]. Thus, the most common fragment of acetic acid is [tex]\rm C_2H_4O_2^+[/tex].
Learn more about the most common fragment, here:
https://brainly.com/question/2863516
roq-sbam-yiq come guys fast only g
Answer:
what is this?
Explanation:
write your question
If 83.6 grams of H2 and 257 grams of N2 react, how many grams of ammonia will be produced?
The mass of ammonia that would be produced is 312.5 g
First, we will write a balanced chemical equation for the reaction
The balanced chemical equation for the reaction is
3H₂(g) + N₂(g) → 2NH₃(g)
This means
3 moles of hydrogen gas reacts with 1 mole of nitrogen gas to produce 2 moles of ammonia.
First, we will determine the number of moles of each reactant present
For Hydrogen (H₂)
Mass = 83.6 g
Molar mass = 2.016 g/mol
Using the formula
[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass}[/tex]
Number of moles of H₂ present = [tex]\frac{83.6}{2.016}[/tex]
∴ Number of moles of H₂ present = 41.468254 moles
For Nitrogen (N₂)
Mass = 257 grams
Molar mass = 28.0134 g/mol
∴ Number of moles of N₂ present = [tex]\frac{257}{28.0134}[/tex]
Number of moles of N₂ present = 9.174181 moles
Since,
3 moles of hydrogen gas reacts with 1 mole of nitrogen gas to produce 2 moles of ammonia
Then,
27.522543 moles of hydrogen gas will react with the 9.174181 moles of nitrogen gas to produce 18.348362 moles of ammonia
∴ 18.348362 moles of ammonia will be produced during the reaction
Now, for the mass of ammonia that would be produced
From the formula
Mass = Number of moles × Molar mass
Molar mass of ammonia = 17.031 g/mol
Mass of ammonia that would be produced = 18.348362 × 17.031
Mass of ammonia that would be produced = 312.49095 g
Mass of ammonia that would be produced ≅ 312.5 g
Hence, the mass of ammonia that would be produced is 312.5 g
Learn more here: https://brainly.com/question/13902065
All live things (plants included) must turn food into _________ that can be used (___________), and then release waste products.
Earth science!
Answer:
I think it is
1. energy
2. respiration
HELPPPPP ASAPPP PLZZZZ
Answer:
9
Explanation:
i think i dont know
maybe someone tell me if I'm wrong
What was the ratio in the formula for Iron (II)
oxide?
lete
What was the ratio in the formula for Iron (III)
oxide?
DONE
Answer:
In Iron (II) oxide, ratio is 1:1
In iron (III) oxide, ratio is 4:2
[tex].[/tex]
In Iron (II) oxide, ratio is 1:1
What is the importance of iron oxide?Iron oxides are very important components in most soils as they have major influence on chemical, physical, and microbial properties of soils. Because of their nanoparticulate size (usually 5-200 nm), iron oxides possess large specific surface area.
Generally, iron oxides are prevalent, widely used as they are inexpensive, and play an imperative role in many biological and geological processes. They are also extensively used by humans, eg, as iron ores in thermite, catalysts, durable pigments.
When iron is exposed to moisture or oxygen, oxidation occurs. During this chemical reaction, iron is converted into iron oxide. The iron oxide typically has a reddish, flaky appearance that becomes progressively worse over time.
Learn more about iron oxide:
https://brainly.com/question/18500540
#SPJ2
PLEASE HELP 35 POINTSSS
Answer:
I think it's B or A. Though I believe it is more so B. I think I'm right though.
Explanation:
Write the chemical formula for disilicon hexabromide.
Answer:
Br6Si2
Explanation:
The chemical formula for disilicon hexabromide is Si₂Br₆.
The chemical formula of a compound is a symbolic representation of its chemical composition.
Chemical formulae gives information about the elements that constitute the molecules of a compound and also about the ratio in which the atoms of these elements combine to form such molecules.
Every constituent component in a chemical formula is identified with its chemical symbol, along with the relative number of atoms that make up each element.
Learn more about Chemical formula, here:
https://brainly.com/question/32228478
#SPJ6
Which of the following describes a chemical property of oxygen?
Oxygen is a gas at room temperature.
An oxygen molecule has an atomic mass of 32 a m u.
The density of oxygen is 0.00133 grams per centimeter cubed .
Oxygen reacts with iron to form rust.
Answer:
Oxygen Reacts with Iron to Form Rust is the Correct Answer
is preferable a high percent error or a low percent
error?
Explanation:
Percent errors tells you how big your errors are when you measure something in an experiment. Smaller percent errors mean that you are close to the accepted or real value. For example, a 1% error means that you got very close to the accepted value, while 45% means that you were quite a long way off from the true value.
1
2. How does a detergent remove a stain?
?
Answer:
By using various chemical compounds to lift the stain while being gentle enough to keep fabric intact.
The electronic configuration of an element is given below.
Element 1: 1s22s22p4
Which statement about the reactivity of the element is true?
It is reactive because it has to gain an electron to have a full outermost energy level.
It is unreactive because it has to lose an electron to have a full outermost energy level.
It is reactive because it has to gain two electrons to have a full outermost energy level.
It is unreactive because it has to gain two electrons to have a full outermost energy level.
Answer:
It is reactive because it has to gain an electron to have a full outermost energy level.
Explanation:
Answer:
A
Explanation:
What determines the energies of light that an element can absorb?
Answer:
Atom
Explanation:
An atom can absorb or emit one photon when an electron makes a transition from one stationary state, or energy level, to another. Conservation of energy determines the energy of the photon and thus the frequency of the emitted or absorbed light.
Your future is affected by your choices today? I agree or disagree
Answer:
The choice that we had decided on doing today factors our future because whatever choice we decide on doing in the present day can impact how our life will play out in the future. ... After all, it is your life, so whatever you chose to do, you have the power to decide and create what you think would be best for you
Explanation:
does the number of electrons reaching the detector increase or decrease as you change the frequency?
which of the following controls all the activities which go on in the cell
Answer:
That would be the necleus! I hope this helps you! :)
Which is the Lewis structure for H3PO4?
::
i
H-Ö
0-H
ö
öz-ö-1
H
I
H
H-0–H
ô–P 6
Answer:
C. H:C:H:H
Explanation:
Follow these simple steps to correctly draw a Lewis dot structure: Add up the total number of valence electrons found in the entire compound. Draw the simple structure (skeleton structure) of the compound by connecting everything with single bonds only. Add electrons to all the noncentral atoms. Put any unused electrons on the central atom.
write short notes on the following:1. Analytical chemist 2. Chemical engineer 3. Healthcare scientists 4. Forensic scientist 5. Research scientist 6. Toxicologists 7. Pharmaceutical chemist 8. Nuclear chemist 9. Industrial chemist.