Using Assembly code
Write a program that read an input from the user. The input is terminated with a period. The project should scan the input and display the following information:

Number of letters

Number of digits (0 to 9)

Number of Special Symbols

Your output should print your name, then below it, your results

Sample Input---abCDE12345%%.

Output
name and last name
Upper letters: 5
Digits (0-9): 5
Special symbols: 2

The correct answer is C. It produces a more accurate copy of the sound wave.

When recording sound, the sample rate refers to the number of times per second that the audio signal is measured and converted into a digital value. A higher sample rate means that the audio signal is being measured and digitized more frequently, which produces a more accurate representation of the original sound wave.

Using a high sample rate is important because it allows for a more precise representation of the audio signal. If the sample rate is too low, some of the audio signal may be lost or distorted, which can result in poor sound quality or artifacts such as aliasing.

It is worth noting that a high sample rate also requires more storage space and processing power, so there is a tradeoff between the quality of the audio and the resources required to store and process it.

Answer: it produces a more accurate copy of the sound wave

Explanation: I took the test

Tthe area of the brake piston is given as  16.59 cm².

The formula is :

force applied to master cylinder / area of master cylinder = force exerted by brake piston / area of brake piston

Substituting the given values, we get:

128 N / 6.54 cm² = 325 N / area of brake piston

Solving for the area of brake piston, we get:

area of brake piston = (325 N x 6.54 cm²) / 128 N

area of brake piston = 16.59 cm² (rounded to two decimal places)

Therefore, the area of the brake piston is 16.59 cm².

Read more on break piston here:https://brainly.com/question/5438877

#SPJ1

Below is an example of a formula that you can use to calculate projected sales figures broken down by season, which can be copied down and across:

Assuming that the seasons are in cells B1:E1 (Summer, Fall, Winter, Spring) and the projected sales data is in cells A2:A6 (Sporting Goods, Electronics, Housewares, Toys, Clothing), you can use the following formula in cell B2:

swift

=A$2 * IF($B$1="Summer", 0.13, IF($B$1="Fall", 0.25, IF($B$1="Winter", 0.30, IF($B$1="Spring", 0.32, 0))))

This formula multiplies the projected sales amount (cell A2) by the corresponding percentage for each season (0.13 for Summer, 0.25 for Fall, 0.30 for Winter, and 0.32 for Spring), based on the value in cell B1. The dollar signs ($) are used to lock the references for cell A2 and the column B, so that the formula can be copied across and down to calculate projected sales for other seasons and product categories.

You can copy this formula down for the remaining product categories (cells B3:B6) and across for the remaining seasons (cells C2:E6) to calculate the projected sales figures broken down by season for all the product categories.

Read more about seasons  here:

https://brainly.com/question/15734021

#SPJ1



David's of Denison

Summer 13% Fall 25%   Winter 30% Spring 32%

Projected Sales

Sporting Goods       350,000

Electronics       310,500

Housewares    289,400

Toys             390,200

Clothing   400,575

A specific kind of cloud computing service known as infrastructure as a service (IaaS) provides basic computation, storage, and networking resources on demand and on a pay-as-you-go basis.

Thus, IaaS is one of the four categories of cloud services, along with serverless, platform as a service, and software as a service (SaaS).

You can reduce the maintenance of on-premises data centres, save money on hardware, and obtain real-time business insights by moving your organization's infrastructure to an IaaS provider.

IaaS solutions provide you the freedom to adjust the amount of IT resources you have according to demand. Additionally, they improve the dependability of your underlying infrastructure while assisting you in quickly provisioning new applications.

Thus, A specific kind of cloud computing service known as infrastructure as a service (IaaS) provides basic computation, storage, and networking resources on demand and on a pay-as-you-go basis.

Learn more about IaaS , refer to the link:

https://brainly.com/question/29457094

#SPJ1

1) We use chart for Visual representation, Data analysis, Effective communication and Decision-making.

2. It is important to select the correct data when creating a chart Accuracy, Credibility, Clarity and Relevance.

Accuracy: Selecting the right data ensures that the chart accurately represents the information you want to convey. Incorrect data can lead to misleading or incorrect conclusions.

Relevance: Choosing the appropriate data ensures that your chart focuses on the relevant variables and relationships, making it more useful for analysis and decision-making.

Clarity: Including unnecessary or irrelevant data can clutter the chart and make it difficult to interpret. Selecting the correct data helps to maintain clarity and simplicity in the chart's presentation.

Credibility: Using accurate and relevant data in your charts helps to establish credibility and trust with your audience, as it demonstrates a thorough understanding of the subject matter and attention to detail.

Find more exercises related to charts;

https://brainly.com/question/26501836

#SPJ1

The answer of the given question based on Instant messaging are given below ,

Instant messaging (IM) is a type of online communication that enables users to send and receive messages in real-time. It allows users to have text-based conversations with other users who are online at the same time, without the delay that email or other forms of communication may have.

Instant messaging can be a useful tool for teens to stay connected with friends and family, but it can also have some disadvantages. Here are the some ways to overcome these disadvantages:

To know more about Privacy visit:

https://brainly.com/question/30160990

#SPJ1

Answer: Authentication is the process of verifying the identity of a user or entity, while authorisation is the process of determining if a user or entity has permission to access a particular resource or perform a certain action.

Explanation:

Below is a Java program that calculates the minimum initial health Charlie needs to start with in order to beat the rank strongest player at each level, based on the given scenario:

java

public class Game {

   public static int calculateMinInitialHealth(int[] strengths) {

       int n = strengths.length;

       int[] dp = new int[n];

       dp[n-1] = Math.max(0, -strengths[n-1]);

       for (int i = n - 2; i >= 0; i--) {

           dp[i] = Math.max(dp[i + 1] - strengths[i], 0);

       }

       return dp[0] + 1;

   }

   public static void main(String[] args) {

       int[] strengths = {5, 8, 2, 6, 1, 7}; // Example strengths of players at each level

       int minInitialHealth = calculateMinInitialHealth(strengths);

       System.out.println("Minimum initial health for Charlie: " + minInitialHealth);

   }

}

The calculateMinInitialHealth method takes an array of strengths of players at each level as input.

Lastly, The result is returned as the minimum initial health Charlie needs to start with.

Read more about java program here:

https://brainly.com/question/25458754

#SPJ1

Stars:

push ebp ; save the base pointer

mov ebp, esp ; set the base pointer to the current stack pointer

mov eax, [ebp+8] ; load the parameter into eax

print_loop:

cmp eax, 0 ; compare the value of the parameter with zero

jle end_print_loop ; jump out of the loop if the value is less than or equal to zero

push eax ; save the value of eax on the stack

mov eax, '*' ; set eax to the character code for the asterisk

push eax ; save the value of eax on the stack

call putchar ; call the putchar function to print the asterisk

add esp, 8 ; clean up the stack by adding 8 bytes

sub eax, 1 ; decrement the value of eax

jmp print_loop ; jump back to the beginning of the loop

end_print_loop:

pop ebp ; restore the base pointer

ret ; return control to the caller

To call this function from the main program and print 12 asterisks, you can use the following code:

mov ecx, 12 ; load the parameter (12) into ecx

call Stars ; call the Stars function

This will print out 12 asterisks (************) to the console.

Answer: C iTs c EEEZZZZZ

Explanation:

big eggie farts

The program to Read string integer value pairs from input until "Done" is read. For each string read, if the following integer read is less than or equal to 45, output the string followed by ": reorder soon" is given below.

Here's a Python program solution to your problem for given input:

while True:

   # Read string integer pairs from input

   try:

       name = input()

       if name == "Done":

           break

       value = int(input())

   except ValueError:

       print("Invalid input format")

       continue

   # Check if the value is less than or equal to 45

   if value <= 45:

       print(name + ": reorder soon")

Thus, this program reads string integer pairs from input until "Done" is read. For each pair, it checks if the integer value is less than or equal to 45.

For more details regarding programming, visit:

https://brainly.com/question/11023419

#SPJ1

In program above, a loop asked users for purchase type (1, 2 or 3) and amount paid. The program outputs purchase type and amount paid after running the loop three times with predetermined data for each purchase.

The programmer converts problem solutions into computer instructions, runs and tests programs, and makes corrections. The programmer reports to aid in fulfilling user needs like paying employees, billing customers, or admitting students.

The function outputs information.  To specify the type of purchase, the user is required to input either 1, 2, or 3 and subsequently input the amount of purchase. Subsequently, the software will generate a display of the sort of transaction carried out and the sum of money that was expended.

Learn more about loop from

https://brainly.com/question/26568485

#SPJ1

Note that in Object Oriented Programming,  (OOP) an object denotes an instance of a class whose structure includes both fields held in memory (properties) plus built-in functionality for processing data stored within said properties.

This structural definition expresses ideas about everyday things in entire systems by outlining their traits (encapsulated properties).

Thi includes  how they behave(defined methods), which can interact flexibly with sibling \ offspring classes following the interactions laid out in principles like encapsulation polimorphism or inheritance supporting the long-term maintainability of software.

Learn more about object oriented programming:
https://brainly.com/question/11023419
#SPJ1

The response to the following prompts on programming in relation to array objects and codes are given below.

A)

Valid declarations that instantiate an array object are:

boolean completed[J] = {true, true, false, false};

This declaration creates a boolean array named "completed" of length 4 with initial values {true, true, false, false}.

int powersOfTwo[] = {1, 2, 4, 8, 16, 32, 64, 128};

This declaration creates an integer array named "powersOfTwo" of length 8 with initial values {1, 2, 4, 8, 16, 32, 64, 128}.

char[] vowels = new char[5];

This declaration creates a character array named "vowels" of length 5 with default initial values (null for char).

float[] tLength = new float[100];

This declaration creates a float array named "tLength" of length 100 with default initial values (0.0f for float).

String[] names = new String[]{"Sam", "Frodo", "Merry"};

This declaration creates a String array named "names" of length 3 with initial values {"Sam", "Frodo", "Merry"}.

char[] vowels = {'a', 'e', 'i', 'o', 'u'};

This declaration creates a character array named "vowels" of length 5 with initial values {'a', 'e', 'i', 'o', 'u'}.

double[] standardDeviation = new double[1];

This declaration creates a double array named "standardDeviation" of length 1 with default initial value (0.0 for double).

In summary, arrays are objects in Java that store a fixed-size sequential collection of elements of the same type. The syntax for creating an array includes the type of the elements, the name of the array, and the number of elements to be stored in the array. An array can be initialized using curly braces ({}) to specify the initial values of the elements.

B) The problem with the code is that the loop condition in the for loop is incorrect. The index should start from 0 instead of 1, and the loop should run until index < masses.length instead of masses.length + 1. Also, the totalMass should be incremented by masses[index], not assigned to it.

Corrected code:
double[] masses = {123.6, 34.2, 765.87, 987.43, 90, 321, 5};

double totalMass = 0;

for (int index = 0; index < masses.length; index++) {

   totalMass += masses[index];

}

The modifications made here are to correct the starting index of the loop, fix the loop condition, and increment the totalMass variable correctly.


C)

1)
Code to set each element of an array called nums to the value of the constant INITIAL:

const int INITIAL = 10; // or any other desired initial value

int nums[5]; // assuming nums is an array of size 5

for (int i = 0; i < 5; i++) {

   nums[i] = INITIAL;

}

2) Code to print the values stored in an array called names backwards:
string names[4] = {"John", "Jane", "Bob", "Alice"}; // assuming names is an array of size 4

for (int i = 3; i >= 0; i--) {

   cout << names[i] << " ".

}

3) Code to set each element of a boolean array called flags to alternating values (true at index 0, false at index 1, true at index 2, etc.):

bool flags[6]; // assuming flags is an array of size 6

for (int i = 0; i < 6; i++) {

   flags[i] = (i % 2 == 0);

}

Learn more about array objects at:

https://brainly.com/question/16968729

#SPJ1

Answer:

Encryption is the process of converting plaintext or readable data into an encoded or encrypted format, which can only be accessed by authorized parties who have the decryption key or password.

Explanation:

Encryption is often used to secure sensitive information, such as financial data, personal information, and confidential business data, from unauthorized access or interception by third parties. There are various encryption algorithms and methods, including symmetric encryption, asymmetric encryption, and hashing, which use mathematical formulas and cryptographic keys to convert plaintext into ciphertext. Encryption is widely used in various fields, including cybersecurity, e-commerce, data storage, and communication, to ensure data privacy and security.

Answer:

The data disaster recovery plan for our small copy shop involves identifying potential data loss scenarios such as hardware failures, natural disasters, and cyber attacks. We will regularly backup all data to an off-site location and test the restoration process. We will also implement data encryption and invest in security software to protect against cyber threats. Additionally, we will train our employees on how to identify and respond to potential data loss situations to minimize the impact on our business. By implementing these measures, we can ensure business continuity and protect our customer's sensitive information.

Answer: #include <iostream>

#include <string>

using namespace std;

int main() {

   string input;

   int value;

   while (true) {

       cin >> input;

       if (input == "Done") {

           break;

       }

       cin >> value;

       if (value <= 45) {

           cout << input << ": reorder soon" << endl;

       }

   }

   return 0;

}

Explanation: hope it helps :)

For later film composers, musical themes would often be placed in the soundtrack, where they would become essential parts of the memorable package that audiences would take home from the theater.

Film soundtracks play a crucial role in enhancing the overall movie experience by evoking emotions and creating memorable moments.

By associating specific themes with characters or situations, composers can reinforce the narrative and create an emotional connection with the audience.

These memorable themes often become synonymous with the film and are easily recalled, even long after leaving the theater.

Find more exercises related to Film soundtracks;

https://brainly.com/question/14824318

#SPJ1

For later film composers, musical themes would often be placed in the soundtrack, where they would become essential parts of the memorable package that audiences would take home from the theater.

Film soundtracks play a crucial role in enhancing the overall movie experience by evoking emotions and creating memorable moments.

By associating specific themes with characters or situations, composers can reinforce the narrative and create an emotional connection with the audience.

These memorable themes often become synonymous with the film and are easily recalled, even long after leaving the theater.

Find more exercises related to Film soundtracks;

https://brainly.com/question/14824318

#SPJ1

A basic hydraulic system with two unequal sized syringes can multiply force through the principle of Pascal's law, which states that pressure exerted on a fluid is transmitted equally in all directions. When force is applied to the smaller syringe, it creates pressure on the fluid which is then transmitted to the larger syringe, causing the larger piston to move with a greater force. This allows the user to multiply their force and apply greater pressure than they would be able to do without the hydraulic system. Essentially, the force is being transferred and amplified through the fluid.

Answer:

d) There is more green fruit than an apple.

Explanation:

The logic error in the following conditional statement is:

d) There is more green fruit than an apple.

The statement "If ColorFruit = Green, then print 'It is an apple!'" is incorrect because not all green fruits are apples. Therefore, the logic of the statement is incorrect. The statement assumes that if the fruit is green, it must be an apple, which is a false assumption.

At year ten data, the population of both light and dark colored moths will vary differently. The purple species will be significantly higher than the red species.

Based on the graph, is feasible that the populace of moths with dark coloration shall persistently grow, whilst the populace of those with light coloration will persistently drop.

It is true that the population of moths with darker month may persist in its rapid growth compared to those with lighter month . As a result, it could be anticipated that by year ten, there will be a greater number of moths with dark coloring in the population compared to those with light coloring.

Learn more about moths from

https://brainly.com/question/24203863

#SPJ1

Here are the answers to your questions:

Types of data based on C programming:

a) Integers: Integers are used to represent whole numbers without any fractional or decimal parts. In C programming, integer data types include int, short, long, and unsigned variants of these types. The size and range of integers depend on the specific type and the architecture of the system.

Others are:

b) Float: Float is used to represent numbers with fractional or decimal parts. In C programming, the float data type is used to store floating-point numbers with single precision. It typically occupies 4 bytes of memory and has a limited range of values and precision compared to double precision data types.

c) String: Strings are used to represent a sequence of characters. In C programming, strings are represented as an array of characters terminated by a null character (\0). String manipulation functions such as strcpy, strlen, etc., are available in C for working with strings.

d) Character: Characters are used to represent individual characters, such as letters, digits, or symbols. In C programming, the char data type is used to store a single character. It typically occupies 1 byte of memory and can represent a wide range of characters including ASCII and Unicode characters.

Algorithm to accept a number and display if it's positive or negative:

vbnet

Copy code

Step 1: Start

Step 2: Declare a variable num of integer type

Step 3: Read input for num

Step 4: If num is greater than 0, go to Step 5, else go to Step 6

Step 5: Display "Number is positive"

Step 6: Display "Number is negative"

Step 7: End

Algorithm and flowchart to accept the cost price and selling price of any item and print the profit or loss:

vbnet

Step 1: Start

Step 2: Declare variables cost_price and selling_price of float type

Step 3: Read input for cost_price and selling_price

Step 4: Calculate profit or loss as selling_price - cost_price

Step 5: If profit or loss is greater than 0, go to Step 6, else go to Step 7

Step 6: Display "Profit: " and the value of profit or loss

Step 7: Display "Loss: " and the absolute value of profit or loss

Step 8: End

Read more about algorithm  here:

https://brainly.com/question/24953880

#SPJ1

Answer: The primary difference between multicore and multiprocessor is that a multicore operates a single CPU, while a multiprocessor has multiple CPUs. In a simplified way, if you want a computer to run a single program faster, that is a job for a multicore processor.

Explanation:

Multiprocessing is a system that has two or more than one processors. In this, CPUs are added for increasing the computing speed of the system. Because of Multiprocessing, there are many processes that are executed simultaneously. Multiprocessing is further classified into two categories: Symmetric Multiprocessing, Asymmetric Multiprocessing.

Multi-programming is more than one process running at a time, it increases CPU utilization by organizing jobs (code and data) so that the CPU always has one to execute. The motive is to keep multiple jobs in the main memory. If one job gets occupied with Input/output, the CPU can be assigned to other jobs.

The example of code that have all the added feature of the print_menu() function and preliminary functions for each of the listed menu items is given in the image attached.

The menu offers file processing, unit selection, room filter editing, summary statistics display, temperature display by date and time, temperature histogram display, and program ending.

So one need to write a print_menu() function to display the menu options. Create stub functions for each menu option: new_file, choose_units, change_filter, print_summary_statistics, print_temp_by_day_time, print_histogram, and a graceful exit function. They should have a print statement instead of a pass statement for now. Stub functions have expected signatures but incomplete implementations, allowing testing before full implementation.

Learn more about program  from

https://brainly.com/question/26134656

#SPJ1



Building our menu

The next step in our project is to build a menu and the code to support it. The menu provides the interface that a user will use to interact with the program.

This assignment will give us practice using loops and conditionals.

We are building on the previous assignment. So start with Lab Assignment 2 and add your new code.

In this Lab Assignment you are going to:

• Create a new file named lab_assignment 3.py.

·

Copy your code from Lab Assignment 2 and paste it into you new file

• Add information to update the docstring to reflect Lab Assignment 3

• Add the new code you are writing to support the requirements for Lab Assignment 3

• Delete the main() the code used in lab_assignment 2 and write a new main() function to generate the required output (the Unit Test, for Lab Assignment 3



Write a function named print_menu()

print_menu() that takes no arguments and returns nothing. Its whole job is to print this menu:

Main Menu

1

2

Process a new data file

- Choose units

-

Edit room filter

4 - Show summary statistics

34567

5 - Show temperature by date and time

7

Show histogram of temperatures Quit

Incidentally, for the rest of the course, we will work on implementing all of the items referenced by the menu.

We are first going to write stub functions which will later be completed. A stub is a function that has the expected signature (i.e. name of the function and parameters), but an incomplete implementation. A stub function is used as a placeholder and so that the code that calls the function can be tested before the called function is fully written.



Next, we need stub functions for the following

Each line below gives you the function signature (name of the function and it's parameters) of each function that you will create in the assignment

1. new_file(dataset) will be called when the user chooses item one.

2. choose_units() will be called when the user chooses item two.

3. change_filter(sensor_list, active_sensors) will be called when the user chooses item three.

4. print_summary_statistics(dataset, active_sensors) will be called when the user chooses item four.

5. print_temp_by_day_time(dataset, active_sensors) will be called when the user chooses item five.

6. print_histogram(dataset, active_sensors) will be called when the user chooses item six. This is an optional no- credit project.

7. And what about item seven? The program should exit gracefully.

These functions do not have any functionality yet. They will initially be stub functions, later you will add the code required for the application. Instead of using the pass statement, though, we will use a print statement for each function so we know that it has been called. Our new_file() function, for example, will look like this:

def new_file(dataset):

"I II II

Open a new file

иии

print("New File Function Called")

Since you do not know the purpose of each of these functions yet, you can just a generic docstring for now.

Answer:

;nasm 2.13.02

section .data

section .bss

number: resb 1;

section .text

global _start

_start:

;;; main

mov al,5;

mov [number],al

; encode number

mov ecx,number

call Encode

; print number

mov ecx,number

call Print

; decode number

mov ecx,number

call Decode

; add 1 to number

inc byte [number]

; encode number

mov ecx,number

call Encode

; print number

mov ecx,number

call Print

jmp end

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; encode adds '0' to the variable in ECX

Encode:

ADD BYTE [ECX],'0'

ret

Decode:

SUB BYTE [ECX],'0'

ret

Read:

mov eax,3

mov ebx,0

int 80h

ret

Print:

mov eax,4

mov ebx,1

mov ecx,number

mov edx,1

int 80h

ret

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

end:

mov eax,1

mov ebx,0

int 80h;

Explanation:

In the main program, we first set the value of number to 5 using mov al,5 and mov [number],al. Then, we call the Encode function to add the character '0' to number. Next, we call the Print function to print the value of number on the console. After that, we call the Decode function to remove the character '0' from number. Then, we increment the value of number by 1 using inc byte [number]. Finally, we call the Encode function again to add the character '0' to number, and then call the Print function to print the updated value of number on the console.

The Encode function takes the variable address as an argument in ECX, and adds the character '0' to the variable using ADD BYTE [ECX],'0'.

The Decode function also takes the variable address as an argument in ECX, and subtracts the character '0' from the variable using SUB BYTE [ECX],'0'.

The Print function uses the mov ecx,number instruction to load the address of number into ECX, and then prints the byte value at that address using the int 80h instruction.

Pseudocode in computer science describes algorithm steps in plain language using structural conventions of a programming language for human reading.

The Pseudocode had 4 bugs: collectedArray not initialized with zeros. Adding value to uninitialized element could cause issues. Fix: Initiate array with zeros using curly brackets: num collectedArray[SIZE] = {0}. Comparison operators in while loops written as < and >.

Hence Pseudocode syntax replaced with correct symbols. Report looped from year 1 to 3 due to wrong operator. Condition changed to year <= SIZE. Stop command removed in pseudocode. After bug fixes, the pseudocode works and produces the desired output.

Learn more about Pseudocode   from

https://brainly.com/question/24953880

#SPJ1

The product that has an open-source license in addition to having a non-relational system is MongoDB

MongoDB is a product with an open-source license and a non-relational system. This NoSQL database operates through a document-oriented data model, as opposed to the traditional table-based relational one.

It carries the GNU Affero General Public License (AGPL) underneath, bringing along a complimentary community edition in addition to its pricier enterprise version that contains extra features and service assurance.

In contrast, databases such as Oracle Database, SQL Server, and MySQL are all of relational nature, wherein only the latter proposes a trial community angle under the GPL license.

Read ,more about database here:

https://brainly.com/question/518894

#SPJ1

The output file will be program will be FindPatientRecords:

using System;

using System.Collections.Generic;

using System.Linq;

using System.Text;

using System.Threading.Tasks;

using System.IO;

namespace Patients

{

 class Red

 {

   static void Main (string[]args)

   {

     int aacounter = 0;

     string aaline, aapatient_id;

     int aaflag = 0;

       Console.WriteLine ("Enter Patient ID"); //

       aapatient_id = Console.ReadLine (); //

Adding the file name ion the program:

     StreamReader aafile = new StreamReader ("Patients.txt,"); /

Adding the loop:

     while ((aaline = aafile.ReadLine ()) != null) //

{

  string[]aast = aaline.Split (','); //

Adding the patient id;

  if (aast[0].Equals (aapatient_id) == true) //Here this can be defined as if it is found

    {

      Console.WriteLine ("Patient ID :{0}\nPatient Name :{1}\nBalance:{2}",

     aapatient_id, aast[1], aast[2]);

      aaflag = 1;

      break;

    }

  aacounter++;

}

     if (aaflag == 0)

{

  Console.WriteLine ("Record not Found");

}

     aafile.Close ();

     System.Console.ReadLine ();

   }

 }

}

Learn more about program, here:

https://brainly.com/question/11023419

#SPJ1

Here's the C++ code for the program to convert an 8-bit binary number to its decimal equivalent:

#include <iostream>

#include <vector>

using namespace std;

int main() {

   vector<int> bits(8);

   // Read in the binary number

   for (int i = 7; i >= 0; i--) {

       cin >> bits[i];

   }

  // Compute the decimal equivalent

   int decimal = 0;

   int weight = 1;

   for (int i = 0; i < 8; i++) {

       decimal += bits[i] * weight;

       weight *= 2;

   }

   cout << decimal << endl;

   return 0;

}

The program first creates a vector to hold the 8 bits of the binary number. It then reads in the bits from the user in reverse order, so that the rightmost bit is stored in element 0 of the vector.

Next, the program computes the decimal equivalent of the binary number by looping through the vector and multiplying each bit by a weight. The weight starts at 1 and is multiplied by 2 at the end of each iteration. The decimal equivalent is updated by adding each product to a running sum.

Finally, the program outputs the decimal equivalent.

Note: This program assumes that the user enters exactly 8 bits of binary input. If you want to make the program more robust, you could add input validation to ensure that the user enters exactly 8 bits.

Read more about programs here:

https://brainly.com/question/28959658

#SPJ1