Use this formula to find the curvature. y = 5x^4 kappa (x) = kappa (x) = |f"(x)|/[1 + (f'(x))^2]^3/2

Three colours out of six can be used to create any one of 20 different varieties of Rainbow Bomb Pop.

We must apply the combination formula in order to determine how many different varieties of Rainbow Bomb Pop can be created.

The formula is as follows since we need to select three colours from a possible palette of six:

nCr = n / (n-r) r!

where r is the number of items we want to choose, n is the total number of items, and! denotes the factorial function (5! = 5x4x3x2x1, for example).

With the formula, we obtain:

6C3 = 6! / 3!(6-3)!

= 6! / 3!3!

= (6x5x4)/(3x2x1)

= 20.

Factorial in mathematics is a straightforward concept.

Factorials are only goods.

The factorial is indicated by an exclamation point.

The natural numbers that are more than it are multiplied by all the natural numbers that are less than it to get the factor.

For similar question on factorial function.

https://brainly.com/question/11346590

#SPJ11

The probability of observing no births in a given hour at the hospital is approximately 0.165, or 16.5% when rounded to 3 decimal places.

To find the probability of observing no births in a given hour at the hospital, we'll use the Poisson distribution formula:

P(X = k) = (e^(-λ) * λ^k) / k!

Here, λ (lambda) is the average rate of births per hour (1.8), k is the number of births we want to find the probability for (0 in this case), and e is the base of the natural logarithm (approximately 2.71828).

Step 1: Plug in the values: P(X = 0) = (e^(-1.8) * 1.8^0) / 0!
Step 2: Calculate e^(-1.8) ≈ 0.1653
Step 3: Calculate 1.8^0 = 1
Step 4: Calculate 0! (0 factorial) = 1
Step 5: Substitute the calculated values back into the formula: P(X = 0) = (0.1653 * 1) / 1
Step 6: Simplify the equation: P(X = 0) = 0.1653

The probability of observing no births in a given hour at the hospital is approximately 0.165, or 16.5% when rounded to 3 decimal places.

Visit here to learn more about probability:

brainly.com/question/30034780

#SPJ11

The image is plotted and attached

The rectangle started with ABCD. Then following the reflection along line AC. point B and point D swapped so we have B' replacing D and D' replacing B.

180 degrees rotation through C, resulted to B'' D'' and A'. Point C maintains it's position since the rotation is about point C.

Enlargement by a factor of 2 results to C' B''' D''' A'' and this is the final image.

While the reflection and rotation preserves the geometry, the enlargement affects the geometry, producing a rectangle with a bigger size twice the initial size

Learn more about transformation at

https://brainly.com/question/4289712

#SPJ1

The probability that X+Y=1 is 0.5.

To find the probability that X+Y=1, given that X is a Bernoulli random variable with P(X=1)=0.8 and Y is a Bernoulli random variable with P(Y=1)=0.5, follow these steps:

1. First, find the probabilities for the complementary events, i.e., P(X=0) and P(Y=0).
  P(X=0) = 1 - P(X=1) = 1 - 0.8 = 0.2
  P(Y=0) = 1 - P(Y=1) = 1 - 0.5 = 0.5

2. Now, consider the two possible cases where X+Y=1:
  a) X=1 and Y=0: P(X=1) * P(Y=0) = 0.8 * 0.5 = 0.4
  b) X=0 and Y=1: P(X=0) * P(Y=1) = 0.2 * 0.5 = 0.1

3. Finally, sum the probabilities of the two cases:
  P(X+Y=1) = P(X=1, Y=0) + P(X=0, Y=1) = 0.4 + 0.1 = 0.5

Learn more about probability:

https://brainly.com/question/13604758

#SPJ11

The probability that X+Y=1 is 0.5.

To find the probability that X+Y=1, given that X is a Bernoulli random variable with P(X=1)=0.8 and Y is a Bernoulli random variable with P(Y=1)=0.5, follow these steps:

1. First, find the probabilities for the complementary events, i.e., P(X=0) and P(Y=0).
  P(X=0) = 1 - P(X=1) = 1 - 0.8 = 0.2
  P(Y=0) = 1 - P(Y=1) = 1 - 0.5 = 0.5

2. Now, consider the two possible cases where X+Y=1:
  a) X=1 and Y=0: P(X=1) * P(Y=0) = 0.8 * 0.5 = 0.4
  b) X=0 and Y=1: P(X=0) * P(Y=1) = 0.2 * 0.5 = 0.1

3. Finally, sum the probabilities of the two cases:
  P(X+Y=1) = P(X=1, Y=0) + P(X=0, Y=1) = 0.4 + 0.1 = 0.5

Learn more about probability:

https://brainly.com/question/13604758

#SPJ11

The probability of laboratory errors in a re-accreditation period follows a Poisson distribution, and we can use this information to answer various questions about the number of laboratories committing errors.

A. The probability that exactly 10 laboratories commit errors in a re-accreditation period, assuming errors follow a Poisson distribution with an average of 30 laboratories committing errors, is 0.00003 (or 3 x 10^-5).

B. To find the standard deviation, we use the formula: square root of the average number of errors (lambda), which is 30. Therefore, the standard deviation is approximately 5.5772.

C. To calculate the probability that more than 40 but less than or equal to 51 laboratories commit errors in a re-accreditation period, we need to use the Poisson distribution formula with lambda equal to 30 and subtract the probability that 40 or fewer laboratories commit errors from the probability that 51 or fewer laboratories commit errors. The result is approximately 0.0108.

D. If the probability of lab errors is 58%, we can use the Poisson distribution formula with lambda equal to the average number of errors, which is 30, to calculate the probability of up to how many laboratories committed errors. The answer is approximately 4 (or 5, if rounded up).

To learn more about Poisson distribution, visit:

https://brainly.com/question/10196617

#SPJ11

The required answer is a combination of weights that can result in a zero standard deviation.

The portfolio with a standard deviation of zero is comprised of Assets A and B. This is because when two assets are perfectly negatively correlated, their returns will cancel each other out, resulting in a portfolio with no risk. On the other hand, it is not possible to determine if the portfolio with a standard deviation of zero is comprised of Assets A and C. This is because the correlation between Assets A and C is unknown, and there may not be a combination of weights that can result in a zero standard deviation.

The standard deviation is a measure of the amount of variation or dispersion of a set of values. A low standard deviation indicates that the values tend to be close to the mean (also called the expected value) of the set, while a high standard deviation indicates that the values are spread out over a wider range.

The portfolio with a standard deviation of zero is comprised of assets A and B. This means that the combination of these two assets has a perfectly negative correlation, leading to the elimination of the overall risk in the portfolio.The standard deviation of a population or sample and the standard error of a statistic (e.g., of the sample mean) are quite different, but related. The sample mean's standard error is the standard deviation of the set of means that would be found by drawing an infinite number of repeated samples from the population and computing a mean for each sample. The mean's standard error turns out to equal the population standard deviation divided by the square root of the sample size, and is estimated by using the sample standard deviation divided by the square root of the sample size In contrast, a portfolio of assets A and C cannot be determined, as there isn't enough information provided to establish their correlation or the possibility of achieving a standard deviation of zero.

To know more about standard deviation. Click on the link.

https://brainly.com/question/2390708

#SPJ11

To begin with, let's first understand what a series is. In mathematics, a series is a sum of numbers that follow a certain pattern. In this case, we have been given a series that follows the pattern of 4(4k + 3), where k is the variable that takes on different values.

Now, to find the sum of the series when k = 1, we need to plug in this value of k into the expression 4(4k + 3) and evaluate the result. So, when k = 1, we have:

4(4(1) + 3) = 4(4 + 3) = 4(7) = 28

This gives us the result of the expression when k = 1, which is 28. Therefore, the sum of the series 4(4k + 3) when k = 1 is 28.

But how do we know that this is the correct answer? To verify this, we can calculate the sum of the series manually by adding up the terms of the series for different values of k.

The given series is 4(4k + 3), so the first few terms of the series for k = 1, 2, 3, and 4 are:

k = 1: 4(4(1) + 3) = 28

k = 2: 4(4(2) + 3) = 44

k = 3: 4(4(3) + 3) = 60

k = 4: 4(4(4) + 3) = 76

If we add up these terms, we get:

28 + 44 + 60 + 76 = 208

This gives us the sum of the series for the first four terms. However, we only need to find the sum of the series when k = 1, which we already calculated to be 28.

Therefore, we can conclude that the answer we found earlier, 28, is indeed the correct sum of the series 4(4k + 3) when k = 1.

Learn more about the sum of the series :

https://brainly.com/question/4617980

#SPJ11

To find the length of the curve, we need to use the formula:

length = ∫[a,b] √[dx/dt)^2 + (dy/dt)^2] dt

In this case, a=0, b=4, and:

dx/dt = 6t
dy/dt = 6t^2

So, we can plug these values into the formula and integrate:

length = ∫[0,4] √[(6t)^2 + (6t^2)^2] dt
length = ∫[0,4] √[36t^2 + 36t^4] dt
length = ∫[0,4] 6t√(1 + t^2) dt

This integral is not easy to solve analytically, so we'll use numerical methods to approximate the answer. Using a numerical integration method such as Simpson's Rule or the Trapezoidal Rule, we can get:

length ≈ 244.36

So the exact length of the curve x = 6 + 3t^2, y = 6 + 2t^3 for 0 ≤ t ≤ 4 is approximately 244.36 units.
To find the exact length of the curve x = 6 + 3t^2, y = 6 + 2t^3 for 0 ≤ t ≤ 4, you can use the arc length formula:

Length = ∫[√(dx/dt)^2 + (dy/dt)^2] dt from t=0 to t=4

First, find the derivatives dx/dt and dy/dt:
dx/dt = 6t
dy/dt = 6t^2

Now, square the derivatives and find their sum:
(6t)^2 + (6t^2)^2 = 36t^2 + 36t^4

Take the square root of the sum:
√(36t^2 + 36t^4)

Now, integrate the expression with respect to t from 0 to 4:
Length = ∫[√(36t^2 + 36t^4)] dt from t=0 to t=4

This integral is not easy to evaluate directly, and numerical methods are usually required. To obtain an approximate value, you can use an appropriate numerical integration technique, like Simpson's Rule or a computer algebra system.

Visit here to learn more about Simpson's Rule brainly.com/question/30459578

#SPJ11

Answer:

tan(A+B) = 84

Step-by-step explanation:

We can use the identity: tan(A+B) = (tanA + tanB) / (1 - tanA*tanB)

Given, tanA = 4/3

So, opposite side of angle A = 4, adjacent side of angle A = 3

Using the Pythagorean theorem, we get the hypotenuse of angle A = 5

Also, sin B = 8/17

So, opposite side of angle B = 8, hypotenuse of angle B = 17

Using the Pythagorean theorem, we get the adjacent side of angle B = 15

Now, we can find the value of tanB as opposite/adjacent = 8/15

Plugging in the values in the identity for tan(A+B), we get:

tan(A+B) = (4/3 + 8/15) / (1 - (4/3)*(8/15))

= (20/15 + 8/15) / (1 - 32/45)

= 28/15 / (13/45)

= (28/15) * (45/13)

= 84

Therefore, tan(A+B) = 84.

Hope this helps!

Mass of O₂ produced is: B. 144

Mass of H₂O produced is: C. 180 g

The balanced chemical equation is:

2 KClO3 → 2 KCl + 3 O₂

From the equation, we can see that 2 moles of KClO₃ produce 3 moles of O2. So, 1 mole of KClO₃ produces (3/2) moles of O₂.

Therefore, 3.0 mol of KClO₃ will produce (3/2) × 3.0 = 4.5 moles of O₂.

To convert moles of O₂ to grams of O₂, we need to use the molar mass of O2, which is 32 g/mol.

So, the mass of O₂ produced is:

4.5 mol × 32 g/mol = 144 g

Answer: B. 144

The balanced chemical equation is:

2 H₂ + O₂ → 2 H₂O

We can see that 1 mole of O₂ reacts with 2 moles of H2 and produces 2 moles of H₂O.

So, 5.0 moles of O₂ will react with (2/1) × 5.0 = 10.0 moles of H₂ to produce (2/1) × 5.0 = 10.0 moles of H₂O.

To convert moles of H₂O to grams of H₂O, we need to use the molar mass of H₂O, which is 18 g/mol.

So, the mass of H₂O produced is:

10.0 mol × 18 g/mol = 180 g

Answer: C. 180

Learn more about mass of O₂.

brainly.com/question/12127540

#SPJ11

The features of the quadratic function are given as follows:

The function is decreasing on the following interval:

(1.5, ∞).

First we look at the vertex of the quadratic function, which is the turning point, with coordinates x = 1.5 and y = 6, hence it is given as follows:

(1.5, 6).

Hence the axis of symmetry is of x = 1.5, which is the x-coordinate of the vertex.

The function is concave down, hence the increasing and decreasing intervals are given as follows:

The x-intercepts are the values of x for which the graph crosses the x-axis, when the y-coordinate is of 0, hence they are given as follows:

(-1, 0) and (4,0).

The y-intercept is the value of y when the graph crosses the y-axis, when the x-coordinate is of zero, hence it is given as follows:

(0,4).

More can be learned about quadratic functions at https://brainly.com/question/31728282

#SPJ1

Yhey have infinitely many solutions, since any point on the line satisfies both equations.

Given the system of equation in the question;

y = -2x + 2

2y + 4x = 4

To find the number of solutions, we can solve for y in the first equation and substitute it into the second equation:

y = -2x + 2

Plug y = -2x + 2 into the second equation.

2( -2x + 2 ) + 4x = 4

Simplify and solve for x.

-4x + 4 + 4x = 4

4 = 4

Since this equation is always true.

Option C) infinitely many solutions is the correct answer.

Learn more about simultaneous equation here: brainly.com/question/30319215

#SPJ1

Answer:

5.0 inches

Step-by-step explanation:

The formula for the volume of a sphere is:

[tex]\boxed{V=\dfrac{4}{3}\pi r^3}[/tex]

where r is the radius of the sphere.

Given a sphere has a volume of 65.5 cubic inches, substitute V = 65.5 into the formula and solve for the radius, r:

[tex]\begin{aligned}\implies \dfrac{4}{3}\pi r^3&=65.5\\\\3 \cdot \dfrac{4}{3}\pi r^3&=3 \cdot 65.5\\\\4\pi r^3&=196.5\\\\\dfrac{4\pi r^3}{4 \pi}&=\dfrac{196.5}{4 \pi}\\\\r^3&=15.636973...\\\\\sqrt[3]{r^3}&=\sqrt[3]{15.636973...}\\\\r&=2.50063840...\; \sf in\end{aligned}[/tex]

The diameter of a sphere is twice its radius.

Therefore, if the radius is 2.50063840... inches, then the diameter is:

[tex]\begin{aligned}\implies d&=2r\\&=2 \cdot 2.50063840...\\&=5.00127681...\\&=5.0\; \sf in\;(nearest\;tenth)\end{aligned}[/tex]

Therefore, the diameter of a sphere with a volume of 65.5 cubic inches is 5.0 inches, to the nearest tenth of an inch.

Answer:

5 cm

Step-by-step explanation:

The formula to find the volume of a sphere is:

[tex]\sf V =\frac{4}{3} \pi r^3[/tex]

Here,

V ⇒ volume ⇒ 65.5 cm³

r ⇒ radius

Let us find the value of r.

[tex]\sf V =\frac{4}{3} \pi r^3\\\\65.5=\frac{4}{3} \pi r^3\\\\65.5*3=4 \pi r^3\\\\196.5=4 \pi r^3\\\\\frac{196.5}{4} =\pi r ^3\\\\49.125=\pi r^3\\\\\frac{49.125}{\pi} = r^3\\\\15.63=r^3\\\\\sqrt[3]{15.63} =r\\\\2.5=r[/tex]

Let us find the diameter now.

d = 2r

d = 2 × 2.5

d = 5 cm

As the sequence {an} is a sequence of constant random variables, it means that each term in the sequence has the same value with probability 1.

If an → a, then for any ε > 0, there exists an integer N such that for all n ≥ N, |an - a| < ε. This means that the probability of an being within ε of a is 1, which can be written as: lim P(|an - a| < ε) = 1

n→∞

Since this is true for any ε > 0, we can rewrite the above as: lim P(|an - a| < δ) = 1

n→∞ where δ is any positive number.

Now, if an → Pa, then for any ε > 0, there exists an integer N such that for all n ≥ N, P(|an - a| < ε) > 1 - δ. This means that the probability of an being within ε of a is greater than 1 - δ, which can be written as: lim P(|an - a| < ε) ≥ 1 - δ

n→∞

Again, since this is true for any ε > 0, we can rewrite the above as:

lim P(|an - a| < δ) ≥ 1 - δ

n→∞

Comparing the two limits, we see that they are equivalent. Therefore, an → a is equivalent to an → Pa.

To learn more about probability, visit here

https://brainly.com/question/30034780

#SPJ4

The maximum profit per day is $600, and the soft-drink vendor must sell 1,500 cans to achieve this maximum profit.

The profit function for the soft-drink vendor is given by P(x) = -0.001x^2 + 3x - 1800. To find the maximum profit per day and the number of cans to sell for maximum profit, follow these steps:

1. Identify the quadratic function: In this case, it's P(x) = -0.001x^2 + 3x - 1800.

2. Find the vertex of the parabola, which represents the maximum profit point. The x-coordinate of the vertex can be found using the formula x = -b / 2a, where a and b are the coefficients of the quadratic function (a = -0.001, b = 3).

3. Calculate the x-coordinate of the vertex: x = -3 / (2 * -0.001) = -3 / -0.002 = 1500.

4. Substitute the x-coordinate back into the profit function to find the maximum profit: P(1500) = -0.001(1500)^2 + 3(1500) - 1800 = $600.

Learn more about maximum profit: https://brainly.com/question/29257255

#SPJ11

Answer:2.82

Step-by-step explanation:

Using the formula

A=πr2

Solving forr

r=A

π=25

π≈2.82095

r≈2.82

The radius of the circle is approximately 2.82 meters.

To find the radius of a circle with a given area, you can use the formula for the area of a circle:

Area = π * r^2

In this case, the area is 25 square meters:

25 = π * r^2

To solve for the radius (r), first divide both sides of the equation by π:

25/π = r^2

Now, take the square root of both sides to find the value of r:

r = √(25/π)

r ≈ √(25/3.1416)

r ≈ √(7.9577)

r ≈ 2.82

The evaluated value of the given trigonometric expression cos 76° – sin 14° is 0. The correct answer is option B.

The trigonometric expression is given as follows:

cos 76° – sin 14°

It is required to find the evaluated value of the given trigonometric expression.

As per the angle of cosine and sine relation: cos (90 – θ) = sin θ.

It can be rewritten as follows:

Here, cos 76 as cos (90 – 14)

And, cos 76 = cos (90 – 14) = sin 14  

cos 76° – sin 14°  = sin 14° – sin 14°

cos 76° – sin 14°  =  0

Therefore, the evaluated value of the given trigonometric expression is 0.

Learn more about the trigonometric expression here:

https://brainly.com/question/11659262

#SPJ1

The complete question is as follows:

Evaluate cos 76° – sin 14°.

A. 1

B. 0

C. -1

D. 2

The population of locusts gains 3/4 of it's size every 0.5 weeks.

An exponential function has the definition presented as follows:

y = ab^x.

In which the parameters are given as follows:

The growth rate after t weeks is given as follows:

(49/16)

When the population gains 3/4 of it's size, the fraction change is given as follows:

1 + 3/4 = 4/4 + 3/4 = 7/4.

Thus the number of weeks needed for the function to gain 3/4 of it's size is obtained as follows:

(49/16)^t = 7/4

(7/4)^(2t) = 7/4

2t = 1

t = 0.5.

More can be learned about exponential functions at brainly.com/question/2456547

#SPJ1

The possible value of QRP is 24^o.

A sine rule is a trigonometric rule which can be used to determine either the angle or length of side of a given triangle that is not a right angle.

sine rule states that;

a/Sin A = b/Sin B = c/Sin C

From the given question, let the measure of angle QRP be represented by R. So that;

9/ Sin 37 = 6/ Sin R

9 Sin R = 6 Sin 37

Sin R = 6 Sin 37/ 9

  = 3.611/ 9

  = 0.4012

R = Sin^-1 (0.4012)

  = 23.65

Thus, QRP is 24^o.

Learn more about sine rule at https://brainly.com/question/20839703

#SPJ1

The required answer is the series is divergent  we cannot find its sum.

The given series is an alternating series with decreasing absolute values of its terms. Thus, we can use the Alternating Series Test to determine its convergence. According to this test, if the absolute values of the terms in an alternating series are decreasing and approach zero, then the series is convergent.

In this case, the absolute values of the terms are:

|4|, |-16/3|, |64/9|, |-256/27|, ...

which are decreasing and approach zero. Therefore, we can conclude that the series is convergent.
the property that different transformations of the same state have a transformation to the same end state. Convergent series, the process of some functions and sequences approaching a limit under certain conditions.
To find its sum, we can use the formula for the sum of an alternating series:

sum = a - a/2 + a/3 - a/4 + a/5 - ...

where a is the first term in the series. In this case, a = 4. Therefore, we have:

sum = 4 - 4/2 + 4/3 - 4/4 + 4/5 - ...

Simplifying this expression, we get:

sum = 4(1 - 1/2 + 1/3 - 1/4 + 1/5 - ...)
This is an alternating series, and to test its convergence, we can apply the Alternating Series Test.
which is a well-known series called the harmonic series. It is known to be divergent, which means that the sum of our alternating series is also divergent. Therefore, we cannot find its sum.

To determine whether the series 4 - (16/3) + (64/9) - (256/27) + ... is convergent or divergent, and if convergent, find its sum, we'll first identify the pattern and express it as a general series formula.
the property that different transformations of the same state have a transformation to the same end state. Convergent series, the process of some functions and sequences approaching a limit under certain conditions.

Notice that the terms are alternating in sign and the numerators are powers of 4, while the denominators are powers of 3. We can express the series as:

∑((-1)^(n+1) * (4^n) / (3^n)) for n = 1 to infinity.

This is an alternating series, and to test its convergence, we can apply the Alternating Series Test. The test has two conditions:

1. The absolute value of the terms must be decreasing: |a_(n+1)| <= |a_n|.
2. The limit of the absolute value of the terms must be 0: lim(n->infinity) |a_n| = 0.

For condition 1:
|a_(n+1)| = |(4^(n+1))/(3^(n+1))|
|a_n| = |(4^n)/(3^n)|

Since 4/3 > 1, the terms in absolute value will be decreasing.

For condition 2:
lim(n->infinity) |(4^n)/(3^n)| = lim(n->infinity) |(4/3)^n|

As n approaches infinity, (4/3)^n also approaches infinity, so the limit is not 0.

Since the second condition is not met, the Alternating Series Test fails, and the series is divergent. Therefore, we cannot find its sum.

To know more about convergent or divergent. Click on the link.

https://brainly.com/question/15415793

#SPJ11

The statement you provided uses the Subtraction Property of Equality. This axiom states that if x = AB + CD + EF + GH, then x - y = AB + CD + EF + GH - y.

The Subtraction Property of Equality is an important axiom in mathematics that allows you to maintain an equation's balance when subtracting the same value from both sides. In your statement, the value 'y' is subtracted from both sides of the equation, maintaining the equal relationship between the expressions.

This property is fundamental in solving algebraic equations, as it helps to isolate variables and determine their values. In this specific case, the subtraction of 'y' from both sides enables you to manipulate the expression and possibly solve for 'x' or 'y' based on the given information.

To know more about algebraic equations click on below link:

https://brainly.com/question/953809#

#SPJ11

The P-value is approximately 0.003. The 95% upper confidence interval on the true process fraction nonconforming is (0.116, 1).

CI are typically estimated at a confidence level of 95% in accordance with the conventional acceptance of statistical significance at a P-value of 0.05 or 5%. In general, the null hypothesis shouldn't fall inside the 95% CI if an observed result is statistically significant at a P-value of 0.05.

We can use the following calculation to create a 95% upper confidence interval on the actual process percent nonconforming:

p+ z√(p(1-p)/n) ≤ p ≤ 1

Plugging in the values, we get:

0.13 + 1.96*√(0.13(1-0.13)/500) ≤ p ≤ 1

Simplifying, we get:

0.116 ≤ p ≤ 1

Therefore, the 95% upper confidence interval on the true process fraction nonconforming is (0.116, 1).

To know more about confidence interval visit:-

https://brainly.com/question/24131141

#SPJ1

The equivalent expression is 0.75n - 7

An equivalent expression is defined as an algebraic expression that have the same solution but differ in their arrangement.

Also, algebraic expressions are described as expression that consists of variables, constants, terms, coefficients and factors.

These expressions are also made up of arithmetic operations such as addition, subtraction, division, multiplication, bracket and parentheses.

From the information given as;

-3.5 (2- 1.5n) - 4.5n

expand the bracket

-7 + 5.25n - 4.5n

collect the like terms

0.75n - 7

Learn more about equivalent expressions at: https://brainly.com/question/4344214

#SPJ1

Since the limit of F(x) is infinity, we can conclude that F(x) = logx xlogx 5 grows at the same rate as logx as x approaches infinity. Therefore, F(x) = logx xlogx 5 is not ω(logx).

A function is a relation between sets that assigns to each element of a first set, exactly one element of the second set. Functions are typically written as an equation, with the first set (the domain) on the left side and the second set (the range) on the right side. The most common type of function is a function from real numbers to real numbers, which is often referred to as a real-valued function. Examples of real-valued functions include linear, polynomial, exponential, and trigonometric functions.


False. F(x) = logx xlogx 5 is not ω(logx). ω(logx) is a notation used to denote a function that grows faster than logx as x approaches infinity. However, F(x) = logx xlogx 5 grows at the same rate as logx as x approaches infinity. To prove this, we can calculate the limit of F(x) as x approaches infinity:

lim F(x) = lim (logx xlogx 5)

= lim (logx xlogx) lim 5

= ∞∞ 5

= ∞

Since the limit of F(x) is infinity, we can conclude that F(x) = logx xlogx 5 grows at the same rate as logx as x approaches infinity. Therefore, F(x) = logx xlogx 5 is not ω(logx).

To know more about function click-
http://brainly.com/question/25841119
#SPJ1

The  f(x) = -3x + 4. 1 is a bijection as it is both one to one and onto.

We need to carry out two steps to check for the bijection-
1) To determine if f is one-to-one, we need to check if different inputs yield different outputs.

So, let's suppose f(a) = f(b) for some real numbers a and b.

Then, -3a + 4 = -3b + 4, which simplifies to -3a = -3b.

Dividing by -3 (which is allowed since -3 is not zero), we get a = b.

Therefore, f is one-to-one.

2) To determine if f is onto (also known as surjective), we need to check if every output has at least one corresponding input.

Let's suppose y is a real number.

Then, we need to solve the equation f(x) = y for x.

That is, -3x + 4 = y,  which gives us x = (4 - y)/3.

Therefore, every real number y has a preimage under f, and f is onto (surjective).

3) Since f is both one-to-one and onto, it is a bijection.
Learn more about injective, surjective, or bijective : https://brainly.com/question/22472765

#SPJ11

The  f(x) = -3x + 4. 1 is a bijection as it is both one to one and onto.

We need to carry out two steps to check for the bijection-
1) To determine if f is one-to-one, we need to check if different inputs yield different outputs.

So, let's suppose f(a) = f(b) for some real numbers a and b.

Then, -3a + 4 = -3b + 4, which simplifies to -3a = -3b.

Dividing by -3 (which is allowed since -3 is not zero), we get a = b.

Therefore, f is one-to-one.

2) To determine if f is onto (also known as surjective), we need to check if every output has at least one corresponding input.

Let's suppose y is a real number.

Then, we need to solve the equation f(x) = y for x.

That is, -3x + 4 = y,  which gives us x = (4 - y)/3.

Therefore, every real number y has a preimage under f, and f is onto (surjective).

3) Since f is both one-to-one and onto, it is a bijection.
Learn more about injective, surjective, or bijective : https://brainly.com/question/22472765

#SPJ11

The value of x is given as 2.045<133.158 deg

A complex number is a representation capable of being written as the combination of a and bi, where a and b exhibit themselves to be authentic numbers, while i stands as an imaginary unit that has been mathematically determined to calculate the result of -1 when squared.

The real part (a) of a complex number can be identified and contrasted against its imaginary contribution made by bi. By following certain regulations, these types of numbers are able to be increased, lessened, multiplied, and divided; providing a widely employed range of accurate calculations in mathematics, physics, engineering, and several other related fields.

Additionally, the complex plane offers a graphical means for displaying these numbers; wherein the real axis relates to the numerical form's real portion and the imaginary axis reflects the data's unreal part.

Read more about complex numbers here:

https://brainly.com/question/10662770

#SPJ1

This is the desired expression for the total solution.

To solve the differential equation, we assume that the solution is of the form y(t) = c(t)eat. Then, we have:

y'(t) = c'(t)eat + aceat

y(0) = c(0)e0a = y

Substituting these into the differential equation, we get:

c'(t)eat + aceat = a(c(t)eat) + bu(t)

Simplifying this equation, we get:

c'(t) = bu(t)e-at

Integrating both sides from 0 to t, we get:

c(t) - c(0) = ∫0t bu(r)e-ar dr

Multiplying both sides by eat, we get:

y(t) - y = e-at(c(0) + ∫0t bu(r)e-ar dr)

Rewriting the right-hand side in terms of a constant c and a function h(t), we get:

y(t) = e-at y + c ∫0t bu(r)e-ar dr

where c = eay and h(t) = bu(t)e-at. This is the desired expression for the total solution.

To learn more about expression visit:

https://brainly.com/question/14083225

#SPJ11

Answer:

Step-by-step explanation:

The solution to the trigonometric expression is:

sin ( cos^-1 (1/2) + tan^-1 (1) )

= sin (60° + 45°)  (since cos^-1 (1/2) = 60° and tan^-1 (1) = 45°)

= sin 105°

= 0.966