**Check for proof photos at the bottom.**
_____________________________________Use the table to compare the solubilities of substances. Check all of the boxes that apply.
A. Aspirin is less soluble than table salt, but more soluble than carbon dioxide.
C. A saturated solution of table sugar is more concentrated than a saturated solution of table salt.
_____________________________________The solubility of glucose at 30°C is 125 g/100 g water. Classify a solution made by adding 550 g of glucose to 400 mL of water at 30°C. Explain your classification, and describe how you could increase the amount of glucose in the solution without adding more glucose.
Answer: The solution is saturated. At 30°C, 500 g of glucose will dissolve in 400 mL of solution. Of the 550 g glucose added, only 500 g will dissolve and 50 g will precipitate out. The amount of glucose in the solution can be increased by heating the solution because the solubility of solids tends to increase with temperature.
_____________________________________Use the graph to identify the number, letter, or word that completes each statement.
• The solubility of Solute D decreases as temperature increases.
• The solubility of Solute E increases the most as temperature increases.
• The solubility of Solutes C and D is the same at 20°C.
• As the temperature increases from 0 to 100, the solubility only changes by about 5 grams for Solute B.
_____________________________________Explanation:In the provided table shows the solubility of 4 different substances. The solubility number for Aspirin is smaller than the number for table salt, but larger than the number for carbon dioxide. Since the solubility if sugar is larger than table salt, its saturated concentration would be higher.
In the given chart, the line representing solubility of solute D decreases as temperature increases. The line for solute E increases the most. At 20°C, the lines of C and D are about the same height.
Here are photos of Edge just incase.
Answer:
A & C
Explanation:
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
289.15k is the answer buddy
CO(g) + 3 H2(g) → CH4(k) + H2O(g) + heat
The sign of AH is
The sign of AS is
The sign of AG is negative a low or high temperature?
Explanation:
AH is negative because the reaction gives out heat (exothermic).
AS is negative because the total entropy of the reactants is greater than that of the products (there are 4 moles of gas on reactant side compared to only 1 mole on the product side). Thus, the reactants are said to be "messier" than the products.
AG is negative at lower temperatures because at low temperatures, -TAS is more negative, resulting in the negative sign of AG.
Hope this helps.
Directions: Each set of lettered choices below refers to the numbered statements immediately following it. Select the one lettered choice that best fits each statement. A choice may be used once, more than once, or not at all in each set. The following questions refer to the below molecules: (A) CO2 (B) H2O (C) CH4 (D) C2H4 (E) PH3 The molecule that has trigonal pyramidal geometry
Answer:
The given molecules are:
(A) CO2 (B) H2O (C) CH4 (D) C2H4 (E) PH3
Which one has trigonal pyramidal geometry?
Explanation:
According to VSEPR (valence shell electron pair repulsion) theory, a molecule with a central atom having hybridization sp3 and with one lone pair of electrons has trigonal pyramidal geometry.
Among the given molecules,
CO2 has central atom carbon with sp hybridization without lone pairs.
So, it is a linear molecule.
H2O, the central atom is oxygen with sp3 hybridization and oxygen has two lone pairs. So, its geometry is V-shape or bent.
CH4 has central atom carbon with sp3 hybridization and no pairs.
So, its geometry is tetrahedral.
C2H4 ethene has carbon atoms as the central atoms with sp2 hybridization and carbon has no lone pairs.
So, its geometry is trigonal planar.
Answer:
PH3 has central atom P with sp3 hybridization.
P has one lone pair on it.
Hence, the geometry of PH3 is trigonal pyramidal.
How many Group 17 elements are in Period 3 of the Periodic Table? A) 1 B) 2 C) 3 D) 4
Enzymes are proteins that speed up chemical reactions in the body.
How do they work?
A) They provide a path with lower activation energy.
B) They increase the concentration of reactants.
C) They decrease the concentration of products.
D) They increase the surface area of reactants.
Answer:
D. They Increase the surface area of reactants.
Explanation:
And why I say the answer is D, Because Enzymes are soluble protein molecules that can speed up chemical reactions in cells
When Enzymes are proteins that speed up chemical reactions in the body so here it increase the surface area of reactants. hence, option d is correct.
What are enzymes?It is the substance that is treated as the catalyst in the living organism.
In this, the biological process arises within the living organism are considered to be the chemical reactions.
Also, enzymes should be soluble protein molecules that speed up the chemical reaction in cell.
hence, the option d is correct.
learn more about an enzyme here: https://brainly.com/question/19346597
Name any three organic fertilizer using by farmers ?
Answer:
Typical organic fertilizers include mineral sources, all animal waste including meat processing, manure, slurry, and guano, plant based fertilizers, such as compost, and biosolids.
What is the state of HNO3 in the reaction? HNO3 (g) --> NO2 (g) + 2 H2O (1) 1 point
+ O2 (g)
gas
liquid
aqueous
Answer:
gas
Explanation:
the answer is right in the question (g) stands for gas.
How would the balloons interaction with each other change if the balloons were moved further apart? Explain.
Explanation:
It is known that like charges repel each other and unlike charges attract each other.
As the balloons are facing each other with like charges so they will repel each other. Hence, they will move apart.
But when balloons were moved further apart then interaction between them will decrease and then there will be no force of repulsion or force of attraction.
If 0.654 g of oxygen dissolves in 1.5 L of water at 1.65 atm, at what pressure (in atm) would you be able to dissolve 1.35 g in the same amount of water?
Explanation:
dylalove464
06/11/2020
Hello,
In this case, we first compute the moles of oxygen in 0.654 g and 1.35 g by using its molar mass (32 g/mol):
Then, by using the ideal gas equation at the both states, given the same both temperature and volume:
We compute the volume at the second moles:
Best regards.
Answer:
3.41
Explanation:
:)
what form of energy does a glue gun produce when turned on?
Why does hydrogen naturally form diatomic molecules (H2), whereas helium exists as a single atom (He)?
Answer:
Hydrogen is a very reactive element. It doesn't exist as a single atom in nature. Neither do any of the other binary nonmetals -- nitrogen, oxygen, fluorine, chlorine, bromine, and iodine. They're too prone to react with something. They react with each other and form binary molecules because the binary molecules are more stable than single atoms (by a lot!). Compounds with other atoms are even more stable, so hydrogen reacts with oxygen to form water, and chlorine reacts with sodium to form table salt.
Explanation:
HURRRY PLS!!
Glycolysis is a ten-step process that breaks down glucose into
A)
NAD+.
B)
two molecules of pyruvate.
C)
ATP.
D)
FAD.
Answer:
B. Two molecules of pyruvate.
Explanation:
Trust me. I got it RIGHT!
Which of the following lists the relative strengths of the fundamental forces from strongest to weakest?
A. Strong nuclear force weak nuclear force, gravitational force, electrostatic force
B. Gravitational force, strong nuclear force electrostatic force, weak nuclear force
C. Electrostatic force, gravitational force, weak nuclear force, strong nuclear force
D. Strong nuclear force, electrostatic force, weak nuclear force, gravitational force
Answer:
D. Strong nuclear force, electrostatic force, weak nuclear force, gravitational force
There are four fundamental or universal forces in nature. Without these forces, all matter in the world will fall apart. The relative strength of fundamental forces is Strong nuclear force, electrostatic force, weak nuclear force, gravitational force. Thus the correct option is D.
What are fundamental forces?The fundamental forces are also called the fundamental interactions. All the known forces of the nature can be collectively called the fundamental forces. The four important fundamental forces are gravitational, electrostatic, strong and weak nuclear forces.
The gravitational force is the weakest fundamental force. It is an attractive force which arises from the gravitational interaction. The attractive as well as the repulsive force caused by the electrically charged particles is defined as the electrostatic force.
The nuclear force is the strongest attractive force. The strong nuclear forces hold the nuclei of atoms together. The weak nuclear forces are responsible for the radioactive decay.
Thus the correct option is D.
To know more about fundamental forces, visit;
https://brainly.com/question/28027715
#SPJ7
Where are both earthquakes and volcanoes common?
a) in the earth’s interior
b) at transform fault boundaries
c) at focal points
d) at subduction zones
Cuantos moles de CO2 se requieren para reaccionar con 2 moles de Ba (OH)2
Answer:
hola soy jess, tu respuesta esta aqui
¿cuantos moles de CO2 se requiere para reaccionar 2 moles de Ba(OH)2
2 mol Ba(OH)₂ × \frac{1molCO_{2} }{1molBa (OH)_{2}}
1molBa(OH)
2
1molCO
2
= 2 moles CO₂
Explanation:
espero que pueda ayudarte
hermana/hermano
lo que
hahahaha
An oil may be converted into a substance that is solid at room temperature by Group of answer choices adding hydrogens, decreasing the number of double bonds in the molecules. cooling it, so that double bonds form and the fats solidify. removing water, causing a dehydration synthesis reaction to occur. removing hydrogens, increasing the number of double bonds in the molecules.
Answer:
Adding hydrogens, decreasing the number of double bonds in the molecules.
Explanation:
Hydrogen is a catalyst, which means that it accelerates or speeds up the velocity of a chemical reaction, by adding hydrogens to oil it will decrease the number of double bonds in the molecules which will make it solidify over time.
Oil + hydrogen creates substances that are solid at room temperature.
How many grams of NaOH are needed to make 250mL of a 0.1M NaOH solution?
Answer:
To make 250 ml of 0.1 M NaOH, you dissolve 1 gram NaOH in enough water to make a final volume of 250 mls.
Explanation:
Your welcome! :)
How does anatomy provide evidence for evolution?
I'll give brainlist!! Simple answer please.
Which method involves separating a solution by liquids moving across a selectively permeable membrane?
Distillation
Chromatography
Fractionation
Osmosis
Answer:
OSMOSIS
Explanation:
Osmosis (/ɒzˈmoʊ.sɪs/) is the spontaneous net movement or diffusion of solvent molecules through a selectively permeable membrane from a region of high water potential (region of lower solute concentration) to a region of low water potential (region of higher solute concentration),
This woman comes to the clinic with high blood pressure,
hyperglycemia(high blood sugar), weakening of the bones and severe
depression of the immune system. Can you diagnose her condition?
Which of the following is the best definition of nuclear fission?
O A. Nuclear fission is the joining of two or more nuclei into one
nucleus.
B. Nuclear fission is the formation of new isotopes through a gain of
electrons.
C. Nuclear fission is the splitting of a nucleus into two or more
nuclei.
O D. Nuclear fission is an exothermic reaction between two stable
nuclei.
Answer:
C
Explanation:
Nuclear fission is a process where the nucleus of an atom is split into two or more smaller nuclei, known as fission products.
Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , therefore option (c) is correct.
What do you mean by the nuclear fission ?Nuclear fission is a process in which an unstable nucleus splits into two nuclides and emits neutrons.
The fission process often produces free neutrons and photons and releases a large amount of energy. Therefore , nuclear fission is either a nuclear reaction or a radioactive decay process.
The fission process often produces gamma radiations , and releases a very large amount of energy .
Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , hence option (c) is correct.
Learn more about nuclear fission , here:
https://brainly.com/question/14899304
#SPJ2
Select the correct answer from each drop-down menu.
A balloon holds a certain volume of air. In what three ways can the volume of the balloon be increased?
- the number of air molecules in the balloon(increase or decrease)
- the temperature of the balloon(increase or decrease)
- the pressure on the balloon(increase or decrease)
Answer:
increase,increase,decrease
Explanation:
What do you notice about the distance between the terrestrial planets compared with the spacing between the gas giants
Answer:
The spacing between the terrestrial planets is less than that between the gas planets.
Explanation:
Since the terrestrial planets which are Mercury, Venus, Earth and Mars have a distance of 0.4 AU, 0.7 A.U, 1.0 AU and 1.5 A.U respectively from while the gas planets which are Jupiter, Saturn, Uranus and Neptune have a distance of 5.2 AU, 9.6 AU, 19.6 AU and 30 AU respectively from the sun, we can see that the spacing between the terrestrial planets is much smaller than the spacing between the gas planets.
For example, the spacing between Mercury and Venus is 0.7 AU - 0.4 AU = 0.3 AU while that between Earth and Venus is 1.0 AU - 0.7 AU = 0.3 AU.
Also, the spacing between Earth and Mars is 1.5 AU - 1.0 AU = 0.5 AU.
Also too, the spacing between the gas planets is shown below the spacing between Jupiter and Saturn is 9.6 AU - 5.2 AU = 4.4 AU while that between Uranus and Saturn is 19.6 AU - 9.6 AU = 10.0 AU.
Also, the spacing between Neptune and Uranus is 30 AU - 19.6 AU = 10.4 AU.
Thus, we can see that the spacing between the terrestrial planets is less than that between the gas planets.
Note that AU means astronomical unit and 1 AU is the distance between the Earth and the Sun. 1 AU = 1.50 × 10⁸ km
Which of the following most likely happens when the number of particles of a gas decreases?
The pressure of the gas increases.
The pressure of the gas remains same.
The number of collisions of gas particles decreases.
The number of collisions of gas particles remains same.
Answer: C. The number of collisions of gas particles decreases
Explanation: As temperature decreases so does everything else same with increase.
When the number of particles of a gas decreases the pressure of the gas increases.
Factors affecting has pressureIn a container containing has molecules, they move about freely in the container but the pressure it exerts on its container depends increase of decrease of the has molecules by volume.
If the volume of a container is decreased, the gas molecules have less space in which to move around. As a result, they will strike the walls of the container more often and the pressure increases.
Therefore, when the number of particles of a gas decreases the pressure of the gas increases.
Learn more about gases here:
https://brainly.com/question/25736513
True or False? Once a sugar molecule is dissolved, it remains as long as the conditions (temperature,
amount of water, stirring, etc.) remain constant.
Answer:
The above statement is False
The following statements characterize a chemical reaction, EXCEPT a.The atoms of the substance rearrange, but the total number of atoms remain the same after the reaction. b.a change in odor c.a change in the total mass of the product d.Energy is involved in the reaction that is either absorbed or released.
Answer:
C. a change in the total mass of the product
Explanation:
A chemical reaction is a reaction that alters the chemical composition of the substances involved. Based on the options in this question, a chemical reaction possess the following features:
- The atoms of the substance called reactants are rearranged into products but the total number of atoms remain the same after the reaction.
- A change in odor occurs as one of the indicators that a chemical reaction has taken place.
- Energy is either absorbed (endothermic) or released (exothermic) in the chemical reaction.
However, one untrue option is that "there is a change in the total mass of the product". The total mass of a chemical reaction does not change i.e. remains the same, before or after the reaction in accordance to the law of conservation of mass.
A magnesium ion, Mg2+, is formed from a magnesium atom, Mg.
Which row about the numbers of protons and neutrons in the magnesium ion and in the magnesium atom is correct?
Why the answer for this question is B.
Pls help to explain it. Thank you.
Answer:
The correct row is B.
Explanation:
The formation of the magnesium ion, Mg²⁺, comes from the removal of 2 electrons from the valence shell of the magnesium atom. Since the remotion is of electrons, the nucleus of the atom remains the same, so the number of protons and the number of neutrons does not change.
If the number of proton change, then the atom also change, since the identity of an atom is related to the atomic number which is the same to the proton number.
Now, if the number of neutrons changes, then we would be in the presence of an isotope of the magnesium atom.
Therefore, the correct row is B.
I hope it helps you!
1. Tyrone is riding his newly bought motorcycle at 30 m/s when he sees a cat on the road ahead. He applied immediately the brakes and comes to a stop in 3.0 s. What was the acceleration of his motorcycle?
Given:
Asked:
Solution:
Final Answer:
2. A jeepney speeds up from 50 km/h to 60 km/h to overtake a truck. If this requieres 20 s, what is the (a) acceleration and (b) distance traveled by the car?
Given:
Asked:
Solution:
Final Answer:
Pls help
Answer:
1. a = -10 m/s²
2. a = 1.8 × 10³ km/h²; s = 0.31 km
Explanation:
1.
Given:
Initial speed (u): 30 m/s
Final speed (v): 0 m/s (rest)
Time elapsed (t): 3.0 s
Asked:
Acceleration (a)
Solution:
We will use the following expression.
a = (v-u)/t = (0 m/s - 30 m/s)/3.0 s = -10 m/s²
Final Answer:
a = -10 m/s²
2.
Given:
Initial speed (u): 50 km/h
Final speed (v): 60 km/h
Time elapsed (t): 20 s
Asked:
(a) Acceleration (a)
(b) Distance traveled (s)
Solution:
(a) First, we will convert the time to hours.
20 s × 1 h/3600 s = 0.0056 h
Then, we will use the following expression.
a = (v-u)/t = (60 km/h - 50 km/h)/0.0056 h = 1.8 × 10³ km/h²
(b) We will use the following expression.
s = u × t + 1/2 × a × t²
s = 50 km/h × 0.0056 h + 1/2 × 1.8 × 10³ km/h² × (0.0056 h)² = 0.31 km
Final Answer:
a = 1.8 × 10³ km/h²
s = 0.31 km
what is quantum physics
Given the translation (0,5), translate ordered pairs (9, 0) and (2,-4).
Answer:
(9,5) and (2,1)
Explanation: