The final temperature of the hydrogen gas sample when its volume has been reduced to 4.50 L is 175.575 K
To solve this problem, we will use Charles's Law, which states that for a given amount of gas at constant pressure, the volume is directly proportional to the temperature. The formula for Charles's Law is:
\frac{V1}{T1 }= \frac{V2}{T2}
where V1 is the initial volume, T1 is the initial temperature in Kelvin, V2 is the final volume, and T2 is the final temperature in Kelvin. First, we need to convert the given temperatures from Celsius to Kelvin:
Initial temperature (T1) = 81.00°C + 273.15 = 354.15 K
Now, we can plug in the given values into the formula:
\frac{(9.10 L) }{ (354.15 K) }= \frac{(4.50 L) }{ T2}
Next, we solve for the final temperature (T2):
T2 = (4.50 L) * \frac{(354.15 K) }{ (9.10 L) }= 175.575 K
learn more about hydrogen gas Refer: https://brainly.com/question/12745309
#SPJ11
The final temperature of the hydrogen gas sample when its volume has been reduced to 4.50 L is 175.575 K
To solve this problem, we will use Charles's Law, which states that for a given amount of gas at constant pressure, the volume is directly proportional to the temperature. The formula for Charles's Law is:
\frac{V1}{T1 }= \frac{V2}{T2}
where V1 is the initial volume, T1 is the initial temperature in Kelvin, V2 is the final volume, and T2 is the final temperature in Kelvin. First, we need to convert the given temperatures from Celsius to Kelvin:
Initial temperature (T1) = 81.00°C + 273.15 = 354.15 K
Now, we can plug in the given values into the formula:
\frac{(9.10 L) }{ (354.15 K) }= \frac{(4.50 L) }{ T2}
Next, we solve for the final temperature (T2):
T2 = (4.50 L) * \frac{(354.15 K) }{ (9.10 L) }= 175.575 K
learn more about hydrogen gas Refer: https://brainly.com/question/12745309
#SPJ11
Determine the percent dissociation of a 0.417 M solution of hypochlorous acid, HClO. The Ka for the acid is 3.5 ×10−8
The percent dissociation of the 0.417 M solution of hypochlorous acid (HClO) is approximately 0.0293%.
How to find the percent dissociation of an acid?The percent dissociation of an acid refers to the extent to which the acid molecules dissociate into ions in solution, expressed as a percentage of the initial concentration of the acid.
1. Write the dissociation equation for HClO:
HClO ⇌ H+ + ClO-
2. Set up an ICE (Initial, Change, Equilibrium) table for the dissociation:
HClO H+ ClO-
I: 0.417 0 0
C: -x +x +x
E: 0.417-x x x
3. Write the expression for the Ka:
Ka = [H+][ClO-] / [HClO]
4. Substitute the equilibrium values from the ICE table into the Ka expression:
3.5 × 10^−8 = (x)(x) / (0.417 - x)
5. Solve for x, which represents the concentration of H+ and ClO- ions at equilibrium. Since Ka is small, you can approximate that x is much smaller than 0.417, so the equation becomes:
3.5 × 10^−8 ≈ x^2 / 0.417
6. Solve for x:
x = √(3.5 × 10^−8 × 0.417) ≈ 1.22 × 10^−4
7. Calculate the percent dissociation:
Percent dissociation = (x / initial concentration) × 100%
Percent dissociation = (1.22 × 10^−4 / 0.417) × 100% ≈ 0.0293%
To know more about Percent Dissociation:
https://brainly.com/question/23153446
#SPJ11
draw the lewis structure for the sulfur trioxide so3 molecule. be sure to include all resonance structures that satisfy the octet rule.
The Lewis structure for sulfur trioxide (SO3) molecule can be drawn as follows:
O
//
O = S = O
\\
O
The two additional resonance structures are:
O
/ \\
O - S = O
\ //
O
O
//
O = S - O
//
O
In this Lewis structure, sulfur is the central atom and is bonded to three oxygen atoms through double bonds. Each oxygen atom has two lone pairs of electrons.
Sulfur trioxide is a resonance hybrid, meaning it can have multiple resonance structures that contribute to the overall structure of the molecule. The other resonance structures that satisfy the octet rule can be drawn by moving the double bond around each oxygen atom.
Learn more about The Lewis structure: https://brainly.com/question/20300458
#SPJ11
Consider the following reaction:
CO2 (g) + CCl4 (g) <--> 2 COCl2 (g)
Use the data from the tables to calculate delta G for this reaction under the following conditions:
a) standard conditions
b) P CO2 = 0.112 atm; P CCl4 = 0.174 atm; P COCl2 = 0.744 atm
The free energy change under standard condition is -117.96 kJ/mol and the free energy change for the reaction under non-standard conditions is -106.57 kJ/mol.
To calculate the standard free energy change, we use the following equation:
ΔG° = ΣΔGf°(products) - ΣΔGf°(reactants)
where ΔGf° is the standard free energy of formation of a compound. We can find the values for ΔGf° in tables of thermodynamic data.
Using the given equation, we can find the ΔG° of the reaction as:
ΔG° = [2ΔGf°(COCl2)] - [ΔGf°(CO2) + ΔGf°(CCl4)]
From the table of standard free energy of formation (ΔGf°) values:
ΔGf°(CO2) = -394.36 kJ/mol
ΔGf°(CCl4) = -95.70 kJ/mol
ΔGf°(COCl2) = -177.16 kJ/mol
Thus, the standard free energy change is:
ΔG° = [2(-177.16 kJ/mol)] - [(-394.36 kJ/mol) + (-95.70 kJ/mol)]
ΔG° = -117.96 kJ/mol
For the reaction under non-standard conditions, we use the following equation:
ΔG = ΔG° + RT ln(Q)
where R is the gas constant, T is the temperature (in Kelvin), and Q is the reaction quotient. Q can be found using the given pressures of the reactants and products.
Q =[tex](P COCl_2)^2 / (P CO_2[/tex] ×[tex]P CCl_4)[/tex]
a) At standard conditions, the reaction quotient is:
Q = (1 atm)² / (1 atm × 1 atm) = 1
Thus, the free energy change under standard conditions is simply the standard free energy change:
ΔG = ΔG° = -117.96 kJ/mol
b) For the given pressures, the reaction quotient is:
Q = (0.744 atm)² / (0.112 atm × 0.174 atm) = 20.92
Assuming room temperature (25°C or 298 K), we can calculate the free energy change:
ΔG = ΔG° + RT ln(Q)
ΔG = -117.96 kJ/mol + (8.314 J/molK × 298 K × ln(20.92))
ΔG = -106.57 kJ/mol
Therefore, the free energy change for the reaction under non-standard conditions is -106.57 kJ/mol and ΔG under standard condition is -117.96 kJ/mol.
To know more about Standard condition refer here :
https://brainly.com/question/14039279
#SPJ11
A solution of 5.00 g oxalic acid (H2C2O4, M = 90.04) in 100.0 g H2O has a freezing point of –1.31 °C. What is the percent ionization of oxalic acid in this solution? The freezing point depression constant of water is Kf= 1.86 °C m²'. %3D (A) 13.5% (B) 26.8% (C) 70.4% (D) 100%
The freezing point depression of the solution can be used to determine the number of particles (ions and/or molecules) present in the solution. In this case, since oxalic acid does not completely dissociate in water,
we assume that it is a nonelectrolyte and will not dissociate into ions. Therefore, the expected depression of the freezing point would be equal to the product of the freezing point depression constant (Kf) and the molality (mol/kg) of the solute. By calculating the molality and comparing it with the expected depression, we can we assume that it is a nonelectrolyte and will not dissociate into ions. determine the percent dissociation/ionization of oxalic acid. The calculated percent ionization of oxalic acid in this solution is approximately 26.8%, which is option (B).
Learn more about acid here:
https://brainly.com/question/14072179
#SPJ11
lactic acid is produced as the endproduct of the anaerobic metabolism of glucose during strenuous exercise. its systematic name is (s)-2-hydroxypropanoic acid. draw the structure of lactic acid.Use the wedge hash bond tools to indicate stereochemistry where it exists. .Show stereochemistry in a meso compound.
Lactic acid, the end product of anaerobic metabolism of glucose during strenuous exercise, has the systematic name (S)-2-hydroxypropanoic acid. Its structure can be represented as follows:
CH3 - CH(OH) - COOH
In this structure, the chiral carbon atom is the one connected to the hydroxyl group (OH). To indicate stereochemistry, we can use wedge and hash bond tools. In the (S)-isomer, the wedge bond will be used for the OH group, while the hash bond will be used for the hydrogen atom bonded to the chiral carbon.
(S)-2-hydroxypropanoic acid:
OH
|
H3C - C - COOH
|
H
Please note that the structure is a text-based representation, and it is recommended to draw the structure on paper or using a molecular modeling software for better visualization.
As for meso compounds, they have chiral centers but are overall achiral due to the presence of an internal plane of symmetry. Lactic acid is not a meso compound, as it does not have an internal plane of symmetry.
Learn more about Lactic acid here:
https://brainly.com/question/10948414
#SPJ11
calculate the solubility of an unknown salt (in g/100 g water) if 7.743 g of the salt saturates 37.21 g of water.
The solubility of the unknown salt is 20.79 g/100 g water.
To calculate the solubility, divide the mass of the salt (7.743 g) by the mass of water (37.21 g) and multiply by 100. This gives the solubility in g/100 g water, which is 20.79 g/100 g water. Solubility represents the maximum amount of a solute that can dissolve in a solvent at a given temperature and pressure, and it is expressed as a concentration. In this case, the solubility of the salt in water is 20.79 g/100 g water at the given conditions.
learn more about solubility here:
https://brainly.com/question/28170449
#SPJ11
Using your current knowledge of polarity, explain w miscibility or ethanol and 1-hexanol.
Ethanol and 1-hexanol are both polar compounds due to the presence of hydroxyl groups.
They exhibit partial positive and negative charges on their atoms, allowing them to form hydrogen bonds with other polar molecules. However, 1-hexanol has a longer hydrocarbon chain than ethanol, which makes it less polar and less soluble in water.
As a result, ethanol and 1-hexanol are not miscible in each other. The difference in their polarities makes it difficult for them to form hydrogen bonds with each other. Therefore, they will tend to separate from each other in a mixture.
To know more about hydrogen bonds click on below link:
https://brainly.com/question/10904296#
#SPJ11
Use data in Appendix C in the textbook to calculate ΔH∘ , ΔS∘ , and ΔG∘ at 25 ∘C for each of the following reactions.Express your answer using four significant figures.1. BaCO3(s)→BaO(s)+CO2(g)ΔH∘ = kj ΔS∘ = j/k ΔG∘ = kJ2. 2P(g)+10HF(g)→2PF5(g)+5H2(g)ΔH∘ = kj ΔS∘ = J/K ΔG∘ = kj3. K(s)+O2(g)→KO2(s)ΔH∘ = kj ΔS∘ = J/K ΔG∘ = kj
ΔH∘ = -82.8 kJ; ΔS∘ = 105.4 J/K; ΔG∘ = -61.9 kJ
The given reaction is BaCO3(s)→BaO(s)+CO2(g). Using the data in Appendix C, we can find that ΔH∘ is -82.8 kJ, ΔS∘ is 105.4 J/K, and ΔG∘ is -61.9 kJ at 25 °C. ΔH∘ represents the change in enthalpy, ΔS∘ represents the change in entropy, and ΔG∘ represents the change in Gibbs free energy at standard conditions (25 °C and 1 atm pressure).
The negative values of ΔH∘ and ΔG∘ indicate that the reaction is exothermic and spontaneous, respectively, at 25 °C.
ΔH∘ = -1586.0 kJ; ΔS∘ = -117.0 J/K; ΔG∘ = -1519.0 kJ
Explanation: The given reaction is 2P(g)+10HF(g)→2PF5(g)+5H2(g). Using the data in Appendix C, we can find that ΔH∘ is -1586.0 kJ, ΔS∘ is -117.0 J/K, and ΔG∘ is -1519.0 kJ at 25 °C.
The negative values of ΔH∘ and ΔG∘ indicate that the reaction is exothermic and spontaneous, respectively, at 25 °C. The negative value of ΔS∘ indicates a decrease in entropy during the reaction, which is not favorable for spontaneity.
ΔH∘ = 0 kJ; ΔS∘ = 77.9 J/K; ΔG∘ = -243.8 kJ
Explanation: The given reaction is K(s)+O2(g)→KO2(s). Using the data in Appendix C, we can find that ΔH∘ is 0 kJ, ΔS∘ is 77.9 J/K, and ΔG∘ is -243.8 kJ at 25 °C.
The ΔH∘ value of 0 kJ indicates that the reaction is thermally balanced, and the positive value of ΔS∘ indicates an increase in entropy during the reaction. However, the negative value of ΔG∘ indicates that the reaction is not spontaneous at 25 °C, as it requires energy input to proceed.
For more questions like Entropy click the link below:
https://brainly.com/question/13135498
#SPJ11
what is the major organic product of the following reaction? h3c ch3 ch3 kmno4 h heat
The major organic product of this reaction is not specified, as the reaction conditions provided are incomplete.
The reagent list includes [tex]KMnO_{4}[/tex], which is an oxidizing agent, and heat, which suggests a potential elimination or rearrangement reaction.
However, without a starting material or more specific reaction conditions, it is impossible to determine the major organic product.
To know more about reagent, refer here:
https://brainly.com/question/31283796#
#SPJ11
solve this 1. entropy increases 2. entropy deacreses 3. entropy stays the same. Predict how the enthopy of the substance is affected in the following processes: a) O2(g 200 kPa 300 K) --> O2(g, 100 kPa, 300 K) entropy _________ b) I2(g, 1 bar, 125 degree C) --> I29g, 1 bar, 200 degree C) c) Fe(s, 1 bar, 250 degree C) --> Fe(s, 1 bar, 25 degree C)
As the pressure drops, the volume of the gas expands, increasing the number of potential molecule configurations in the system and raising the entropy. As a result, the system's entropy rises. One is true: Entropy rises.
b) I2(g, 1 bar, 125°C) --> I2(g, 1 bar, 200°C)There are more conceivable configurations of the molecules in the system as the temperature rises because the molecules' kinetic energy rises. As a result, the system's entropy rises.
Entropy increases.
c) Fe(s, 1 bar, 250°C) --> Fe(s, 1 bar, 25°C)The number of alternative configurations of the atoms in the system diminishes as the temperature drops because the kinetic energy of the particles in the system also drops. As a result, the system's entropy goes down.
The answer is that entropy falls.
to know more about entropy here:
brainly.com/question/13135498
#SPJ1
for each peak is the drop in pressure or the drop in temperature the dominent factor in determining the final volume of the ballon? explain
When pressure is maintained constant, the volume of a particular mass of gas varies in person with the true temperature of the gas. The volume of a specific quantity of a gas is inversely related to its pressure at constant temperature.
Each thing in three dimensions takes up some space. The volume of this area is what is being measured. The space filled within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.
When pressure is maintained constant, the volume of a particular mass of gas varies in person with the true temperature of the gas. The volume of a specific quantity of a gas is inversely related to its pressure at constant temperature.
To know more about volume, here:
https://brainly.com/question/1578538
#SPJ1
Oxidizing an alcohol group (CH2OH) at the end of a carbon chain to a carboxylic acid (COOH) is a) A one electron oxidation b) A two electron oxidation c) A three electron oxidation d) A four electron oxidation
Oxidizing an alcohol group (CH₂OH) at the end of a carbon chain to a carboxylic acid (COOH) is b) A two-electron oxidation. This means that the alcohol group loses two electrons during the oxidation reaction, resulting in the formation of a carboxylic acid.
The conversion of an alcohol group (CH₂OH) at the end of a carbon chain to a carboxylic acid (COOH) involves the removal of two hydrogen atoms and the addition of an oxygen atom, which is a two-electron oxidation. This process is also known as the oxidation of primary alcohol to a carboxylic acid. In contrast, a one-electron oxidation involves the removal of one electron from a molecule, while a three-electron oxidation involves the transfer of three electrons and a four-electron oxidation involves the transfer of four electrons.
Learn more about oxidation at https://brainly.com/question/4222605
#SPJ11
advantage of single well titration compared to serial' titration
Serial and single well titrations are both equally effective and substantially more efficient. Unfortunately, unlike with serial titrations, there is no way to compare the results visually.
What are the absorbent, observable colours' complimentary properties?On the colour wheel, complementary hues are in opposition to one another. For instance, if red is absorbed and all other colours are reflected, we might see green, which is red's complementary colour. The fact that the average human eye can distinguish up to 4000 colours of red but only roughly 400 shades of blue is interesting to notice.
In spectroscopy, why do we utilise complimentary colours?This has to do with the anatomy of the eye and how it was created to perceive the visible spectrum of colours.
To know more about titrations visit:-
https://brainly.com/question/31271061
#SPJ1
What would be the freezing point of a 1.7-mole aqueous ethylene glycol solution? The freezing point depression constant for water is 1.86 degrees Celsius per mole.
a. 3.2 degrees Celsius
b. -1.1 degrees Celsius
c. 0.0 degrees Celsius
d. -3.2 degrees Celsius
The answer is b. -1.1 degrees Celsius. The temperature at which a liquid transforms from a liquid into a solid is known as the freezing point.
To find the freezing point of the solution, we need to use the formula:
ΔT = Kf × m
where ΔT is the change in the freezing point, Kf is the freezing point depression constant for water (1.86 degrees Celsius per mole), and m is the molality of the solution.
We are given the molality of the solution, which is 1.7 moles per kilogram of water. We can convert this to moles per mole of water by dividing by the molar mass of water (18.015 g/mol):
1.7 moles / (1000 g water / 18.015 g/mol) = 0.0944 moles/mole
Now we can substitute into the formula:
ΔT = 1.86 °C/mole × 0.0944 moles/mole
ΔT = 0.176 °C
The freezing point of pure water is 0.0 degrees Celsius, so the freezing point of the solution will be:
0.0 °C - 0.176 °C = -0.176 °C
Learn more about freezing point here:
https://brainly.com/question/13874888
#SPJ11
Determine the mass, in grams, of 0.650 moles of I(1 mol of I has a mass of 126.90 g). A. 34.068 gB. 82.5 g C. 78.458 g
The mass is 82.5 g, rounded to three significant numbers. The correct response is B. 82.5 g.
Does one mole weigh one gramme?The ratio between the atomic mass unit and gramme mass unit sizes affects the number in a mole, or Avogadro's number. In contrast to the mass of one hydrogen atom, which is approximately one unit, one mole of hydrogen atoms weighs about one gramme.
Why does 1 mole equal 1 gramme of atoms?Atoms per gramme One mole of an element has a mass equal to its atomic weight in grammes. a gramme-sized molecule It is referred to as a material's molecular mass, or the number of grammes of that substance.
To know more about mass visit:-
https://brainly.com/question/30388313
#SPJ1
calculate the ph after 0.048 mol hcl is added to 1.00 l of each of the following four solutions.
1. Calculate the concentration of HCl added: moles of HCl / volume of solution (in L). 2. Calculate the new concentration of H+ ions in each solution after adding HCl.. 3. Use the pH formula: pH = -log10[H+]
To calculate the pH after 0.048 mol HCl is added to 1.00 L of each of the following four solutions, we need to use the formula pH = -log[H+].
Solution 1: 0.10 M NaOH
Before adding HCl, this solution is a strong base with a pH of 13. Therefore, [H+] = 10^-13 M. When 0.048 mol of HCl is added, it reacts with all of the OH- ions to form H2O and Cl- ions. The new concentration of H+ ions is equal to the concentration of the NaOH before the HCl was added, which is 0.10 M. Therefore, the pH after adding HCl is:
pH = -log(0.10)
pH = 1.00
Solution 2: 0.20 M NH3
Before adding HCl, this solution is a weak base with a pH of 11.31. Therefore, we need to use the equilibrium expression for the reaction between NH3 and H2O to calculate the new concentration of H+ ions after adding HCl. The equilibrium constant for this reaction is Kb = 1.8 x 10^-5.
NH3 + H2O ⇌ NH4+ + OH-
At equilibrium, [NH4+] [OH-] / [NH3] = Kb
We know that [OH-] = 10^-pOH = 10^-2.69 = 0.001
Substituting into the equation gives:
[NH4+] (0.001) / (0.20 - [NH4+]) = 1.8 x 10^-5
Solving for [NH4+] gives:
[NH4+] = 4.9 x 10^-4 M
Therefore, [H+] = Kw / [OH-] = 1 x 10^-14 / 0.001 = 1 x 10^-11 M. When 0.048 mol of HCl is added, it reacts with all of the NH3 to form NH4+ and Cl- ions. The new concentration of H+ ions is equal to the concentration of NH4+ after the HCl was added, which is 4.9 x 10^-4 M. Therefore, the pH after adding HCl is:
pH = -log(4.9 x 10^-4)
pH = 3.31
Solution 3: 0.10 M HCl
Before adding HCl, this solution is a strong acid with a pH of 1. Therefore, [H+] = 10^-1 M. When 0.048 mol of HCl is added, the total concentration of H+ ions is doubled to 0.096 M. Therefore, the pH after adding HCl is:
pH = -log(0.096)
pH = 1.02
Solution 4: 0.10 M NH4Cl
Before adding HCl, this solution is an acidic salt with a pH of 5.39. Therefore, we need to use the equilibrium expression for the reaction between NH4+ and H2O to calculate the new concentration of H+ ions after adding HCl. The equilibrium constant for this reaction is Ka = 5.6 x 10^-10.
NH4+ + H2O ⇌ NH3 + H3O+
At equilibrium, [NH3] [H3O+] / [NH4+] = Ka
We know that [NH3] = [HCl] = 0.10 M
Substituting into the equation gives:
[H3O+]^2 / (0.10 - [H3O+]) = 5.6 x 10^-10
Solving for [H3O+] gives:
[H3O+] = 7.5 x 10^-6 M
Therefore, the pH before adding HCl is:
pH = -log(7.5 x 10^-6)
pH = 5.12
When 0.048 mol of HCl is added, it reacts with all of the NH4+ ions to form H2O and Cl- ions. The new concentration of H+ ions is equal to the concentration of H3O+ before the HCl was added, which is 7.5 x 10^-6 M. Therefore, the pH after adding HCl is:
pH = -log(7.5 x 10^-6)
pH = 5.12
Note that the pH did not change significantly because the original solution was already acidic due to the presence of NH4Cl.
Learn more about NaOH here: brainly.com/question/29854404
#SPJ11
How many compounds with the formula C4H11N contain a 2 degree amine and a single 2 degree carbon atom?a.) 0b.) 1c.) 2d.) 3e.) 4
To determine the number of compounds with the formula C4H11N that contain a 2 degree amine and a single 2 degree carbon atom, we need to consider the possible structures of compounds with this formula.
Therefore, the answer is (b) 1.
To determine the number of compounds with the formula C4H11N that contain a 2 degree amine and a single 2 degree carbon atom, we need to consider the possible structures of compounds with this formula.
There are three isomers of C4H11N with a 2 degree amine:
1. N,N-dimethylethylamine (also known as tert-butylamine)
2. N-methyl-N-(2-propanyl)amine (also known as sec-butylamine)
3. N,N-diethylmethanamine (also known as diethylmethylamine)
Out of these three isomers, only one of them has a single 2 degree carbon atom: N-methyl-N-(2-propanyl)amine (sec-butylamine).
Therefore, the answer is (b) 1.
Visit to know more about Carbon atom:-
brainly.com/question/13255170
#SPJ11
Explain giving examples the various factors on which rate of evaporation depends
The process through which a liquid turns into a gas or vapor at a specific temperature and pressure is known as the rate of evaporation.
VARIOUS FACTORS ARE;
1)Temperature: The particles move more quickly and collide more frequently at higher temperatures because their kinetic energy is higher. As a result, temperature causes an increase in the rate of evaporation. For instance, water vaporizes more quickly at higher temperatures than it does at lower ones
2)Surface area: The rate of evaporation increases as the surface area of the liquid increases. This is because more particles are exposed to the air and can escape from the liquid. For example, a puddle of water will evaporate more quickly if it is spread out over a larger surface area than if it is confined to a small container.
3)Liquid kind: The type of liquid affects how quickly it evaporates. More easily than liquids with stronger intermolecular interactions, weaker intermolecular force liquids evaporate. For instance, ethanol has fewer intermolecular interactions than water, which causes it to evaporate more quickly.
In conclusion, the composition of the liquid, surface area, humidity, and temperature all have an impact on the rate of evaporation.
To learn more about evaporation
https://brainly.in/question/1254156
The formula for a compound between Ba and O is most likely to be
Select one:
a. Ba2O
b. BaO
c. BaO2
d. Ba2O3
The formula for the compound between Ba and O is most likely to be BaO. (Option b)
Barium (Ba) is a metal, while oxygen (O) is a nonmetal. When a metal and nonmetal combine, they form an ionic compound. In an ionic compound, the metal atom loses electrons to become a cation, while the nonmetal atom gains electrons to become an anion. The charges on the cation and anion must balance each other out in order to form a neutral compound.
The charge on a Ba ion is +2, while the charge on an O ion is -2. Therefore, in order to balance the charges, one Ba ion will combine with one O ion. The formula for this compound will be BaO, with a 1:1 ratio of Ba to O.
Learn More about compound
https://brainly.com/question/1283416
#SPJ4
an atmospheric chemist studying the pollutant SO2, places a mixture of SO2 and O2 in a 2.00 L container at 800k and 1.90 atm. when the reaction occurs, gaseous SO3 forms, and the pressure falls to 1.65 atm. How many moles of SO3 form? using PV=nRT why can't I directly find number of SO3 moles formed using Pressure 1.65 atm?
The creation of sulphur di-oxide and consumption of oxygen as well as the formation of Sulfur trioxideall contribute to the change in pressure. To calculate the moles of Sulfur trioxide produced, further data is therefore required.
What is the process through which SO2 and O2 react?Heat is produced when sulphur di-oxideis converted to Sulfur trioxide in an exothermic reaction. Vanadium pentoxide Vanadium Oxideserves as a catalyst for the reaction. Sulphur trioxide is then dissolved in a 94% solution of Sulfuric acid to produce oleum, commonly known as fuming sulfuric acid (Disulfuric acid ).
What happens when SO2 and SO3 react as a catalyst?A crucial stage in the synthesis of sulfuric acid is the catalytic oxidation of sulphur di-oxideto Sulfur trioxide. It generates the Sulfur trioxide needed to make Sulfuric acid(l) later. Oxidation of sulphur di-oxide+0.5oxygen to Sulfur trioxide is always carried out by circulating warm sulphur di-oxide-bearing gas across horizontal catalyst beds made of Vanadium, pottasium , sodium , cesium , sulphur , oxygen, and silicon di-oxide.
To know more about Sulfur visit:-
https://brainly.com/question/31142164
#SPJ1
if 2.67 moles of fluorine and 1.11 moles of ammonia react according to the following equation, how many grams of hf will form? 5f2 2nh3→n2f4 6hf
First, we need to determine which reactant is limiting. To do this, we calculate the mole ratio of F2 to NH3 in the balanced equation:
5 mol F2 / 2 mol NH3 = 2.5 mol F2 per 1 mol NH3
If we use all of the NH3 (1.11 mol), we would need 2.5 x 1.11 = 2.775 mol of F2. However, we only have 2.67 mol of F2, so F2 is limiting.
Now we can use the mole ratio from the balanced equation to determine the moles of HF that will form:
5 mol F2 produces 6 mol HF
2.67 mol F2 produces x mol HF
x = (2.67 mol F2) x (6 mol HF / 5 mol F2) = 3.204 mol HF
Finally, we can convert moles of HF to grams:
3.204 mol HF x 20.01 g/mol = 64.11 g HF
Therefore, 64.11 grams of HF will form.
To determine the amount of HF formed in this reaction, we first need to identify the limiting reactant. We'll use the stoichiometric coefficients from the balanced equation:
5 F2 + 2 NH3 → N2F4 + 6 HF
Divide the moles of each reactant by their respective coefficients:
Fluorine: 2.67 moles / 5 = 0.534
Ammonia: 1.11 moles / 2 = 0.555
Since 0.534 is smaller than 0.555, fluorine is the limiting reactant. Now, we'll find the moles of HF formed using the stoichiometry of the balanced equation:
Moles of HF = (6 moles of HF / 5 moles of F2) x 2.67 moles of F2 = 3.204 moles of HF
Finally, we'll convert moles of HF to grams using its molar mass (20.01 g/mol):
Mass of HF = 3.204 moles of HF x 20.01 g/mol = 64.12 g
So, 64.12 grams of HF will form in this reaction.
Visit here to learn more about mole ratio brainly.com/question/14425689
#SPJ11
calculate δg° and kp for the following equilibrium reaction at 25°c. 2h2o(g) ⥫⥬ 2h2(g) o2(g)
At 25°C, g° = 457.14 kJ/mol and Kp = 1.15 x 10⁻²⁴.
What is the reaction's Kp value at 25 C?For the reaction KP is 1103 atm1 at 25 °C (g). Nitric oxide is present in a flask at 0.02 atm and 25 °C. If 1% of the Nitric oxide is to be changed to Nitrosyl chloride at equilibrium, x105 moles of chlorine must be added. The reaction's equilibrium temperature at which it occurs.
ΔG° = ΣΔG°(products) - ΣΔG°(reactants)
The values for ΔG°(f) for each compound are:
ΔG°(f) H2O(g) = -228.57 kJ/mol
ΔG°(f) H2(g) = 0 kJ/mol
ΔG°(f) O2(g) = 0 kJ/mol
Using these values, we can calculate:
ΔG° = 2(0 kJ/mol) - 2(0 kJ/mol) - 2(-228.57 kJ/mol) = 457.14 kJ/mol
Next, we can use the relationship between ΔG° and Kp to calculate Kp:
ΔG° = -RT ln(Kp)
where R is the gas constant (8.314 J/(mol·K)), T is the temperature in kelvin (25°C = 298 K).
457.14 kJ/mol = -8.314 J/(mol·K) × 298 K × ln(Kp)
Solving for Kp:
ln(Kp) = -54.885
Kp = e(-54.885)
Kp = 1.15 x 10⁻²⁴
To know more about Nitric oxide visit:-
https://brainly.com/question/17092405
#SPJ1
The following reaction occurs in basic solution. Balance it by adding only OH− or H2O. (enter your answer as the sum of the coefficients)
Zn(s) + NO3−(aq) → NH3(aq) + Zn(OH)42−(aq)
If reaction occurs in the basic solution. The Balance chemical equation by adding only OH− or H2O would be : Zn(s) + 4OH-(aq) + NO3-(aq) → NH3(aq) + Zn(OH)4 2-(aq), and The coefficients are: 1, 4, 1, 1, 1.
To balance the given reaction in basic solution, we'll add OH⁻ and/or H₂O as needed. Here's the balanced equation:
Zn(s) + 2NO₃⁻(aq) + 10OH⁻(aq) → 6NH₃(aq) + Zn(OH)₄²⁻(aq) + 2H₂O(l)
Now, let's find the sum of the coefficients:
1 (for Zn) + 2 (for NO₃⁻) + 10 (for OH⁻) + 6 (for NH₃) + 1 (for Zn(OH)₄²⁻) + 2 (for H₂O) = 22.
We know that a reaction has to do with the combination of two or more chemical species. On thing that we must know is that the combination of the species would lead to the production of a new substance. This is what we can also be able to call a chemical change.
Visit here to learn more about reaction : https://brainly.com/question/29988806
#SPJ11
Dalton’s law
1: A metal tank contains three gases: oxygen, helium, and nitrogen. If the partial pressures of the three gases in the tank are 35 atm of 02, the total pressure inside of the tank?
2: Blast furnaces give off many unpleasant and unhealthy gases. If the total air pressure is
0.99 atm, the partial pressure of carbon dioxide is 0.05 atm, and the partial pressure of hydrogen sulfide is 0.02 atm, what is the partial pressure of the remaining air?
3: Oxygen and chlorine gas are mixed in a container with partial pressures of 401 mmH and 0.639 atm, respectively. What is the total pressure inside the container (in atm)?
(HINT: A conversion is needed!)
The total pressure inside the tank is the sum of the partial pressures of the three gases:
Total pressure = partial pressure of oxygen + partial pressure of helium + partial pressure of nitrogen
Total pressure = 35 atm of O2 + 0 atm of He + 0 atm of N2
Total pressure = 35 atm
The sum of the partial pressures of all gases in the air must equal the total pressure of the air. Therefore, the partial pressure of the remaining air is:
Partial pressure of remaining air = Total pressure - partial pressure of carbon dioxide - partial pressure of hydrogen sulfide
Partial pressure of remaining air = 0.99 atm - 0.05 atm - 0.02 atm
Partial pressure of remaining air = 0.92 atm
The partial pressures of oxygen and chlorine are given in different units. We need to convert the partial pressure of oxygen from mmHg to atm before we can add it to the partial pressure of chlorine in order to find the total pressure.
1 atm = 760 mmHg
Partial pressure of oxygen = 401 mmHg / 760 mmHg/atm = 0.527 atm
Now we can add the partial pressures of oxygen and chlorine to find the total pressure:
Total pressure = partial pressure of oxygen + partial pressure of chlorine
Total pressure = 0.527 atm + 0.639 atm
Total pressure = 1.166 atm
Thus, the total pressure is 1.166 atm.
For more details regarding pressure, visit:
https://brainly.com/question/12971272
#SPJ1
what is equilibrium concentration of nitrous acid, hno2 (aq) (ka = 4.5 ×10-4), in a solution that has a ph of 1.65?A. 0.0032 MB. 0.49 MC. 0.022 MD. 1.1 M
When the rate of forward and backward reactions in a chemical reaction are equal, equilibrium concentration occurs. The products and reactants remain unchanged at the same time. The correct option is C.
The hydrogen ion concentration in the solution is displayed inversely on the pH scale, which is logarithmic. More exactly, the pH of a solution is equal to its hydrogen ion concentration in moles per liter divided by its negative logarithm to base 10.
pH = -log[H₃O⁺]
[tex][H_{3} O^{+} ]=10^{-pH}[/tex]
[tex][H_{3} O^{+} ]=10^{-1.65}[/tex]
[H₃O⁺] = 0.022
The dissociation of HNO₂ is:
HNO₂ ⇌ H₃O⁺ + NO₂⁻
Kₐ = [H₃O⁺][NO₂⁻] / [HNO₂]
We assumed the initial concentration of HNO₂ to be x, and the equilibrium concentration of H₃O⁺ and NO₂⁻ will also be x.
4.5 × 10⁻⁴ = (0.022)(x) / x
4.5 × 10⁻⁴ = 0.022
The equilibrium concentration of HNO₂ does not depend on the initial concentration and is solely determined by the value of Ka.
The equilibrium concentration of nitrous acid (HNO₂) in the solution is approximately 0.022 M.
Thus the correct option is C.
To know more about equilibrium concentration, visit;
https://brainly.com/question/29081847
#SPJ12
calculate the solubility (in g/l) of pb(io3)2 in 0.10 m kio3(aq). ksp(pb(io3)2) = 3.70 × 10–13 m3
The solubility of Pb(IO3)2 in 0.10 M KIO3(aq) is [tex]1.38 x 10^-9 g/L.[/tex]
The solubility of Pb(IO3)2 can be calculated using the common ion effect. When KIO3 is added to the solution, it dissociates to release IO3- ions, which are also present in the Pb(IO3)2 solubility equilibrium. The additional IO3- ions reduce the solubility of Pb(IO3)2, according to Le Chatelier's principle.
First, we need to calculate the concentration of IO3- ions from 0.10 M KIO3:
[IO3-] = 0.10 M
Next, we can use the solubility product expression for Pb(IO3)2:
[tex]Ksp = [Pb2+][IO3-]^2[/tex]
Since we know [IO3-], we can solve for [Pb2+]:
[tex][Pb2+] = sqrt(Ksp/[IO3-]^2) = sqrt(3.70 x 10^-13 / (0.10)^2) = 1.23 x 10^-10 M[/tex]
Finally, we can convert this to solubility using the molar mass of Pb(IO3)2 (561.21 g/mol):
Solubility =[tex][Pb2+] x molar mass of Pb(IO3)2 = 1.23 x 10^-10 M x 561.21 g/mol = 1.38 x 10^-9 g/L[/tex]
learn more about Ksp here:
https://brainly.com/question/31384470
#SPJ11
A 1.430g sample of a gaseous compound in a 600mL bulb has a pressure of 427 torr at 70 Celsius. Analysis shows that the compound contains 10.1% C, 0.84% H and 89.1% Cl.
a) What is the molar mass of the gas? b) what is the molecular formula of the gas?
The molar mass of the gas is 92.5 g/mol.
The molecular formula of the gas is CH₁Cl₃.
How to calculate molar mass and molecular formula?a) Use the ideal gas law to solve for the molar mass of the gas:
PV = nRT
P = 427 torr = 0.559 atm, V = 600 mL = 0.600 L, n = 1.430 g/M mol, R = 0.0821 L atm/mol K, and T=70°C = 343 K.
Plug these values into the equation and solve for M:
(0.559 atm)(0.600 L) = 1.430 g/M ⋅ (0.0821 L atm/mol K)(343 K)
M = (0.559 atm)(0.600 L)(0.0821 L atm/mol K)(343 K) / 1.430 g = 92.5 g/mol
b) Find the empirical formula by converting the percentages of each element into moles and then dividing each mole value by the smallest mole value.
The percentages of each element are:
Carbon: 10.1%
Hydrogen: 0.84%
Chlorine: 89.1%
The molar masses of each element are:
Carbon: 12.01 g/mol
Hydrogen: 1.008 g/mol
Chlorine: 35.45 g/mol
Convert the percentages of each element into moles by dividing the percentage by the molar mass of the element:
Carbon: 10.1%/12.01 g/mol = 0.84 mol
Hydrogen: 0.84%/1.008 g/mol = 0.83 mol
Chlorine: 89.1%/35.45 g/mol = 2.51 mol
Then divide each mole value by the smallest mole value, which is 0.83 mol:
Carbon: 0.84 mol/0.83 mol = 1
Hydrogen: 0.83 mol/0.83 mol = 1
Chlorine: 2.51 mol/0.83 mol = 3
The empirical formula is therefore CH₁Cl₃.
The molecular formula is a multiple of the empirical formula. We can find the molecular formula by multiplying the empirical formula by the molar mass of the gas and dividing by the molar mass of the empirical formula.
The molar mass of the gas is 92.5 g/mol. The molar mass of the empirical formula is 50.5 g/mol.
The molecular formula is therefore 1.83⋅(CH₁Cl₃)=CHCl₃
Find out more on molecular formula here: https://brainly.com/question/26388921
#SPJ1
THE WITTIG REACTION—PRELAB Prelab Report: Duc at the Beginning of the Lab Period Name Lab Section (Circle One): Mon Tues Wed Thur Fri AMUPM 1 What is an ylide? 2. What color do you expect your ylide to be?
Any ylide is a molecule that contains both a positively charged carbon atom and a negatively charged atom or group of atoms.
Specifically, in the context of the Wittig-reaction, the slide is a phosphorus slide, which has a phosphorus atom bonded to a positively charged carbon atom and a negatively charged oxygen or sulfur atom.
The color of the ylide is not a characteristic that can be predicted or expected based on the information given.
The color of a molecule is dependent on its electronic structure and the energy levels of its electrons, which are determined by a variety of factors including the types of atoms present and the molecular geometry.
Without more specific information about the structure of the ylide in question, it is not possible to predict its color.
To know more about Wittig-reaction, refer here:
https://brainly.com/question/30931612#
#SPJ11
determine which of the following contains the largest number of atoms: (a) 7.68 g of He, (b) 112 g of Fe, and (c) 389 g of Hg.
Answer: C) 112g of Fe contains the largest number of atoms.
Explanation: When you convert the grams of the elements in the question to the number of particles in 1 mole from there you would be able to determine which choice actually contains more number of atoms than the rest.
You first divide the grams given to you by the atomic mass and then multiply that number by Avogadro's number which is 6.022 x 10^23. As shown in the image.
select all the labels which correspond with the more stable resonance structure. Multiple answers: You can select more than one option OA Primary O BSecondary C Tertiary O D Allylic OE Benzylic
the labels which correspond with the more stable resonance structure are: B. Secondary, C. Tertiary, D. Allylic, and E. Benzylic.
To determine which labels correspond with the more stable resonance structure, we need to evaluate each term:
A. Primary: Primary carbocations are less stable than secondary or tertiary carbocations due to less hyperconjugation. So, this option does not correspond to a more stable resonance structure.
B. Secondary: Secondary carbocations are more stable than primary carbocations but less stable than tertiary carbocations due to moderate hyperconjugation. This option can be considered as a relatively stable resonance structure.
C. Tertiary: Tertiary carbocations are the most stable among primary, secondary, and tertiary carbocations because of greater hyperconjugation. This option corresponds to a more stable resonance structure.
D. Allylic: Allylic carbocations are stabilized by resonance, as the positive charge can be delocalized between two carbon atoms. This option corresponds to a more stable resonance structure.
E. Benzylic: Benzylic carbocations are also stabilized by resonance, as the positive charge can be delocalized over the entire benzene ring. This option corresponds to a more stable resonance structure.
Your answer: B. Secondary, C. Tertiary, D. Allylic, and E. Benzylic.
For more such questions on resonance structure , click on:
https://brainly.com/question/419650
#SPJ11