Answer:
Creo que es D pero no tan segura
Explanation:
Which types of electron orbitals will have a higher energy than a 4 d orbital?
Answer:
shell
Explanation:
it is because the shell contains many electrons
How are a desert and a tundra similar?
They both have high levels of precipitation.
They have many trees and a lot of vegetation.
They have high average temperatures.
They have low humidity and low levels of precipitation.
Answer:
They have low humidity and low levels of precipitation.
Explanation:
Both the desert and the tundra are two extreames, one is really hot while the other is really cold. Deserts only receive less than 300 mm of rain each year. While the tundra receives 150 to 250 mm of precipitation each year, including melted snow. Which is less than the majority of the world's deserts.
Answer: They have low humidity and low levels of precipitation.
Explanation:
Differences: Tundra's are extremely cold, and doesn't get much rain.
Differences: The Dessert is Extremely hot and doesn't get rain.
Explanation: There is already our answer here, If we compare there differences the we will find our answer. This is what I found as the same "doesn't get rain." And we know that precipitation is rain so your answer would be precipitation. Your answer: They have low humidity and low levels of precipitation.
The Ksp of silver bromide at 25°C (298 K) is 5.0 x 10-13. Write the solubility expression hydrogen oxygen for this compound and show the dissociation equation for AgBr.
Which is a LIMIT that authors telling stories using aural media, such as radio plays, must deal with?
A. listeners can hear how each actor says lines of dialogue
B. sound effects can enhance the story's action
C. music can reinforce the story's emotional moments
D. characters thoughts and feelings must be spoken aloud
earth has a low air pressure zone at the equator because what
HOW MANY MOLES OF CS2 FORMS WHEN 2.7 MOLE C REACTS
PLS HELPP!!!!! A type of waves that carries energy from one place to another, even through empty space is:
A. Amplitude
B. Wave
C. Light
D. Energy
Answer: The answer is C light pretty obvious.
Explanation:
A type of waves that carries energy from one place to another, even through empty space is Light. therefore, option C is correct.
Which kind of waves carry energy from one place to another?Waves can move energy between locations, they do not always move mass. Common examples of waves are light, sound, and ocean waves. Since sound and water waves are mechanical waves, they must move via a medium.
Waves that can pass across the vacuum of space are electromagnetic waves. Unlike electromagnetic waves, mechanical waves must travel through a material medium in order to transfer energy from one place to another.
Electromagnetic waves that are light waves, can move energy both through matter and through space.
Thus, A type of waves that carries energy from one place to another, even through empty space is Light, option C is correct.
To learn more about the wave, follow the link;
https://brainly.com/question/25954805
#SPJ2
how many atoms are in 14 moles of cadium
Answer:
14x6.02x10^23=8.428x10^23 atoms
Answer:
atoms are in 14 moles of cadmium. Cadmium is present in some foods and is emitted when fossil fuels like as coal and oil is used, smoking cigarettes. It is used in craft glazes, metal batteries, and coatings. We know that 1 mole of Cadmium (Cd contains) 6.023*1023 atoms, which is Avogadro's number
Explanation:
Help me out with those two letters pls
Answer:
F. 1, 1
G. 1
Explanation:
When you work out how many there are of each thing, the numbers that were already in there equal each other, do you just need to add ones in the other blanks.
Given that the nucleophilic substitution reaction used 5.0 mL of t-pentyl alcohol and 12.0 mL of conc. hydrochloric acid to produce t-pentyl chloride, what is the theoretical yield of t-pentyl chloride, in grams
Answer:
4.90 g
Explanation:
Given that:
volume of t-pentyl alcohol = 5 mL
the standard density of t-pentyl alcohol = 0.805 g/mL
Recall that:
density = mass(in wt) /volume
mass = density × volume
mass = 0.805 g/mL × 5 mL
mass = 4.03 g
Volume of HCl used = 12 mL
The reaction for this equation is shown in the image attached below.
From the reaction,
88.15 g of t-pentyl alcohol reacts with concentrated HCl to yield 106.59 g pf t-pentyl chloride.
4.03 g of t-pentyl alcohol forms,
[tex]= \dfrac{106.59 \ g \times 4.03 \ g}{88.15 \ g}[/tex] of t-pentyl chloride.
Therefore,
Theoretical yield of t-pentyl chloride = 4.90 g
Fish breathe the dissolved air in water through their gills. Assuming the partial pressures of oxygen and nitrogen in air to be 0.20 atm and 0.80 atm, respectively, calculate the mole fractions of oxygen and nitrogen in water at 298 K. Comment on your results
Answer:
X(O₂) = 0.323
X(N₂) = 0.677
Explanation:
We have the partial pressures of oxygen (O₂) and nitrogen (N₂):
P(O₂) = 0.20 atm
P(N₂) = 0.80 atm
In order to solve the problem, you need the solubilities of each gas in water at 298 K. We can consider 1.3 x 10⁻³ mol/(L atm) for oxygen (O₂) and 6.8 x 10⁻⁴mol/(L atm) for nitrogen (N₂) from the bibliography.
s(O₂) = 1.3 x 10⁻³ mol/(L atm)
s(N₂) = 6.8 x 10⁻⁴mol/(L atm)
So, we calculate the concentration (C) of each gas as the product of its partial pressure (P) and the solubility (s):
C(O₂) = P(O₂) x s(O₂) = 0.20 atm x 1.3 x 10⁻³ mol/(L atm) = 2.6 x 10⁻⁴mol/L
C(N₂) = P(N₂) x s(N₂) = 0.80 atm x 6.8 x 10⁻⁴mol/(L atm) = 5.44 x 10⁻⁴ mol/L
In 1 liter of water, we have the following number of moles (n):
n(O₂) = 2.6 x 10⁻⁴ mol
n(N₂) = 5.44 x 10⁻⁴ mol
Thus, the total number of moles (nt) is calculated as the sum of the number of moles of the gases in the mixture:
nt = n(O₂) + n(N₂) = 2.6 x 10⁻⁴ mol + 5.44 x 10⁻⁴ mol = 8.04 x 10⁻⁴ mol
Finally, the mole fraction of each gas is calculated as the ratio between the number of moles of each gas and the total number of moles:
X(O₂) = n(O₂)/nt = 2.6 x 10⁻⁴ mol/(8.04 x 10⁻⁴ mol) = 0.323
X(N₂) = n(N₂)/nt = 5.44 x 10⁻⁴ mol/(8.04 x 10⁻⁴ mol) = 0.677
WHAT IS A ROCK?
Please put the answer below
DO ITTT NOWWWWWWWWWWWWWW
|
\/
How can a cation be formed?
Add 1 clectron
Take away 1 clectron
Add 1 proton
Take away 1 prekon
how is substitution reaction in alkanes different from dehydrogenation reaction since both involve removing a hydrogen atom from the molecule?
Answer:
See Explanation
Explanation:
A substitution reaction means the replacement of one or more hydrogen atoms in an alkane by another atom or group. It does not introduce a double bond into the product. The product retains single bonds between the species present.
For instance;
CH4 + Cl2 -------> CH3Cl +HCl
is a substitution reaction
Dehydrogenation is the process of removing two hydrogen atoms from a saturated compound compound thereby yielding an unsaturated product.
E.g
C2H6 --------->C2H4 + H2
The key difference is that substitution reaction yields a saturated product while dehydrogenation yields an unsaturated product.
10. An aqueous solution is made from 0.315 mol of Na,Cr2O7. If the volume of the
solution is .025 L, what is the molarity of the solution? (Answer with significant
digits. Example: 00.0)
Answer:
Its 12.6M
Explanation:
It came to the conclusion and got these answers
2.22
20.5
10
12.6
12.6 is the correct answer
(b) How many moles of hydrogen are needed to make 30 moles of Fe?
PLEASE HELP ASAP
Answer:
1 mole of Fe is 55.85 g per mole
Explanation:
hope it helps
The moles of hydrogen that are needed to make 30 moles of Fe is 45 moles.
What are moles?Moles is a measurement unit. It is the quantity amount of substance.
The balanced equation is
Fe2O3 + 3H2 ---> 2Fe + 3H2O
Given the moles of iron is 30
To find the moles of hydrogen is?
According to the given balanced equation, the ratio of moles of hydrogen and iron is 3 : 2
To produce 30 moles of Fe
30 x 3 / 2 = 45 moles.
Thus, the number of moles of hydrogen is 45 moles.
To learn more about moles, refer to the link:
https://brainly.com/question/20486415
#SPJ5
Your question is incomplete. Your most probably complete question is given below:
One way to change iron are, Fe2O3, into metallic iron is to heat it together with hydrogen:
Fe2O3 + 3H2 ---> 2Fe + 3H2O
Explain three factors that can affect the size of a line in a spectrum.
Answer:For atoms and molecules, the width of spectral lines is governed mainly by the broadening of the energy levels of the atoms or molecules during interactions with surrounding particles and by the broadening of the spectral lines as a result of the Doppler effect.
Explanation:
In the formula H2SO4, what is the 4 called?
Answer:
Well 4 in H2SO4 would be called Sulfuric Acid
Explanation:
The Reason why its called by its name because the form lua is called this its because its a colorless Acid that burns it also has dissolving metals and other stuff inside of it. it has another name called oil of vitriol. hopefully this helps ^^!
The frequency of a wave does not change as it passes from one medium to another.
What will most likely happen if a light wave moves from the air into a solid?
The wavelength of the light wave will increase.
The speed of the light wave will decrease.
The wavelength of the light wave will remain the same.
The speed of the light wave will remain the same.
(in subject a put chemistry cause there was no science, the subject is science)
Answer:
it will decrease
Explanation:
on test. have a nice day
Answer:
I think it is c
Explanation:
How do I turn on a Girl???
Answer:
7 Ways to turn a woman on. ...
Ask her what she likes, and do your homework. ...
Know the three parts of foreplay. ...
Be creative: Not all women are the same. ...
Know her body. ...
Help her feel comfortable receiving oral sex. ...
Play with lube or toys. ...
Remember that great sex won't happen overnight.
Explanation:
Answer: Ask her what she likes, and do your homework. ...
Know the three parts of foreplay. ...
Be creative: Not all women are the same.
Hope this helps
how do you identify whether a solution is a buffer solution or not
Answer:
You check whether the PH level changes when you add little amounts of strong acid or base. If you see that there is little to no change in the PH, then it is a buffer solution.
Hope that answers your question
Explanation:
Bats and marine mammals are able to locate prey and to communicate by sending and receiving sound waves that echo off surface. Echos demonstrates the wave property of A: absorption, B: diffusion, C: transmission, or D: reflection
What are all of the mole ratios of MgCl2 -> Mg+ Cl2
Answer:
2 moles
In words, 1 mole of Mg reacts with 2 moles of HCl to form 1 mole of MgCl₂ and 1 mole of H₂. The molar ratio of HCl to MgCl₂ is 2:1.
what's the relation between Kp and Kc
Answer:
the relation between Kp and Kc is
[tex] \colorbox{red}Kp=Kc{[RT]}^{∆n}[/tex]
where
∆n=no.of moles of gaseous product - no.of moles of gaseous reactant in the balanced chemical equation.
R=universal gas constant
T=temperature.
The volume of a gas is 5.0 L, when the temperature is 5.0 degrees Celsius. If the temperature is increased to 10.0 degrees Celsius with no change in pressure, what is the new volume?
Answer:5.1L
Explanation:
250 mL of a solution of calcium oxalate is the evaporated until only a residue of solid calcium
oxalate is left. The mass of the residue recovered from the container was 154 mg. What is the
solubility product of calcium oxalate?
Answer:
2.3 * 10^-5
Explanation:
Recall that the solubility of a solute is the amount of solute that dissolves in 1 dm^3 or 1000cm^3 of solution.
Hence;
Amount of calcium oxalate = 154 * 10^-3/128.097 g/mol = 1.2 * 10^-3 mols
From the question;
1.2 * 10^-3 mols dissolves in 250 mL
x moles dissolves in 1000mL
x = 1.2 * 10^-3 mols * 1000/250
x= 4.8 * 10^-3 moldm^-3
CaC2O4(s) ------->Ca^2+(aq) + C2O4^2-(aq)
Hence Ksp = [Ca^2+] [C2O4^2-]
Where;
[Ca^2+] = [C2O4^2-] = 4.8 * 10^-3 moldm^-3
Ksp = (4.8 * 10^-3)^2
Ksp = 2.3 * 10^-5
How many grams of potassium carbonate are needed to make 300ml of a 4.5M solution?
Answer:
186.3g
Explanation:
4.5moles of K₂CO₃ is in 1000ml
? moles of K₂CO₃ is in 300 ml
(4.5 × 300)/ 1000 = 1.35 moles of K₂CO₃
1 mole of K₂CO₃ = (39 × 2) + 12 + (16 × 3) = 78 + 12 + 48 = 138g
1.35 moles of K₂CO₃ = ?
= (1.35 × 138)/1 = 186.3g
how many moles of lithium are in 18.2 grams of lithium
Answer:
I think 2.6 sorry if its wrong
The number of moles of 18.3 grams of lithium is equal to 2.62 mol.
What is a mole?A mole can be defined as a metric unit that is used to evaluate a count of particles in the sample of a given substance. The particles counted are generally identical chemical entities, but they are individually distinct.
A mole is used for a large number of quantities of molecules, atoms, ions, or other specific particles. The number of chemical compounds or elements can be measured in the terms of moles.
The number of units of the chemical which are present in 1 mole is equal to 6.023 × 10 ²³ refers to Avogadro’s constant.
Given, the mass of lithium in the sample = 18.2 g
The mass of one mole of lithium = 6.94 g
6.94 grams of lithium has moles = 1 mol
18.2 g of lithium has moles of Li = 18.2/6.94 = 2.62 mol
Therefore, the moles in 18.2 g of Lithium is 2.62 mol.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
A sample of polonium-210 has an initial mass of 390 milligrams (mg). If the half-life of polonium-210 is 36 days, how many mg of the sample remains after 72 days?
A.
392 mg
B.
195 mg
C.
97.5 mg
D.
48.75 mg
Answer:
C
Explanation:
I got this question right on my test.
 How many moles of ammonium hydroxide are present in 140.0 g of the substance?
I believe the answer is 18.