Tumu’s class was given an assignment to feature a scientist that contributed to the development of the cell theory. The class decided to use images to feature the scientist of their choice.

Which image would Tumu most likely use in his assignment to feature Rudolf Virchow?

the magnified shapes of cells in a piece of cork
the different cells that make up a plant leaf
the types of cells at work in the human body
the way root cells reproduce to increase root length

Answer:

A

Explanation:

I took the test

Answer:

53.5%

Explanation:

Step 1: Given data

Step 2: Calculate the mass corresponding to 0.00875 moles of KClO₃

The molar mass of KClO₃ is 122.55 g/mol.

0.00875 mol × 122.55 g/mol. = 1.07 g

Step 3: Calculate the percent by mass of KClO₃ in the mixture

We will use the following expression.

%m/m = mass of KClO₃/mass of the sample × 100%

%m/m = 1.07 g/2.00 g × 100%

%m/m = 53.5%

The percent by mass of KClO3 in the original mixture is 53.5%.

Since

The mass of the sample should be 2.00 g

Moles of KClO₃: 0.00875 mol

The molar mass of KClO₃ is 122.55 g/mol.

Now the mass is

= 0.00875 mol × 122.55 g/mol.

= 1.07 g

Now the percentage should be

= mass of KClO₃/mass of the sample × 100%

= 1.07 g/2.00 g × 100%

= 53.5%

hence, The percent by mass of KClO3 in the original mixture is 53.5%.

Learn more about mass here: https://brainly.com/question/21988892

Answer:

Physical models can represent objects or systems that are too small, too big, or too far away to study. They are way easier, cheaper, and safer to work with or use when compared to the real objects that they represent.

Explanation:

Answer:

Transition Metals

Explanation:

Answer:

Group 8 & 11

Explanation:

Transition Metals

Answer:

In 1924, the French physicist, Louis de Broglie suggested that if light has electron, behaves both as a material particle and as a wave. According to this theory, small particles like electrons when in motion possess wave properties.

Explanation:

examples

This can be derived as follows according to Planck’s equation, E = hv = hc /λ ∴ v=c/λ(energy of the photon (on the basis of Einstein’s mass energy relationship) E = mc2    

( If Bohr’s theory is associated with de-Broglie’s equation then wave length of an electron can be determined in bohr’s orbit and relate it with circumference and multiply with a whole number 2πr = nλ or λ = (2πr/2π) From de-Broglie equation, λ = (h/mv).  

Answer:

A circle graph, or a pie chart, is used to visualize information and data. A circle graph is usually used to easily show the results of an investigation in a proportional manner. Bar graphs are used to compare things between different groups or to track changes over time. However, when trying to measure change over time, bar graphs are best when the changes are larger.

Explanation:

In short, bar graphs are better to keep track of data over long periods of time, and circle graphs are better when you are trying to visualize a specific set of data.

Circle graph can be also be called pie chart, which  is more widely used. It is usually made up of a circle, divided into parts or pies. In the divided parts, it is used to differentiate between different data.

Bar charts on the other hand are like graphs having both x and y axis. It is used to represent data with respect to the height of the graph. Each data is divided into different smaller parts on the graph.

Example of what they look like is attached below.

First one is bar chart while the second is a circle graph

for more on this, visit: https://brainly.com/question/3661259

Answer:

It is 161.97324 g/mol

1 molecule

Answer:

i think its B

Explanation:

Answer:

aaaaaaaaa

Explanation:

Answer:

protons and neutrons are located in the nucleus.

Answer:

mass in gram = 642.6 g

Explanation:

Given data:

Density of aluminum = 2.70 g/mL

Volume of aluminum = 238 mL

Mass in gram = ?

Solution:

Density:

Density is equal to the mass of substance divided by its volume.  The symbol used for density is called rho. It is represented by ρ. However letter D can also be used to represent the density.

SI unit of density is Kg/m3.

Other units are given below,

g/cm3, g/mL , kg/L

Formula:

d =m/v

d = density

m=mass

V=volume

Now we will put the values in formula.

2.70 g/mL = m/ 238 mL

m = 2.70 g/mL × 238 mL

m = 642.6 g

So when something is boiling it is moving faster meaning the molecules are more spread out and not condense like a solid

So the answer is the 2nd set

Answer:

I believe it would be ionic using the stock system.

Explanation:

The only difference is the size of cations, Cs+ being larger than Na+ and hence Na+ will have more polarising power than Cs+ and hence NaCl will be more covalent than CsCl or in other words CsCl will be more ionic than NaCl.

Answer:matter is anything has mass and take up space

Explanation:

Answer:

yes they are

Explanation:

Answer:

Carbon

Explanation:

Answer:

group 18

Explanation:

The noble gases (Group 18) are located in the far right of the periodic table and were previously referred to as the "inert gases" due to the fact that their filled valence shells (octets) make them extremely nonreactive

Answer:group 18

Explanation

Answer:

0.19 mol H₂O

General Formulas and Concepts:

Chem

Explanation:

Step 1: Define

Given: 3.5 g H₂O from RxN

Step 2: Define conversions

Molar Mass of H - 1.01 g/mol

Molar Mass of O - 16.00 g/mol

Molar Mass of H₂O - 2(1.01) + 16.00 = 18.02 g/mol

Step 3: Convert

[tex]3.5 \ g \ H_2O(\frac{1 \ mol \ H_2O}{18.02 \ g \ H_2O} )[/tex] = 0.194229 mol H₂O

Step 4: Check

We are given 2 sig figs. Follow sig fig rules.

0.194229 mol H₂O ≈ 0.19 mol H₂O

Option ( C ). Hydrolysis (/haɪˈdrɒlɪsɪs/; ancient Greek for "water" and "to dissolve") is a chemical reaction in which water molecules break one or more chemical bonds.)

What does the example of hydrolysis mean?

Hydrolysis is the process of breaking down compounds by adding water. Here is an example of hydrolysis:

Sodium acetate is a type of salt. When sodium acetate is mixed with water, the chemical bonds are broken and it breaks down into sodium ions and acetate ions.

What is function of hydrolysis?

Hydrolysis reactions break the bonds and release energy. Biopolymers are ingested and hydrolyzed in the gastrointestinal tract to form small molecules that can be absorbed by cells and further broken down to release energy.  

Where does the hydrolysis take place?

Hydrolysis is the process by which compounds are broken down into simpler compounds and involves the chemical uptake of water. Almost all tissues contain enzymes that catalyze hydrolysis, but the highest concentration is in the liver.

To know more about Hydrolysis visit here:

https://brainly.com/question/30457911

#SPJ1

Answer:

Kr

Explanation:

The noble gas that is isoelectronic with Br⁻ is krypton.

This is because krypton is the closest noble gas to Br on the periodic table.

Electronic configuration of Bromine is;

            2, 8, 18, 7

  Br⁻ becomes;  2, 8, 18, 8

  Krypton is;       2, 8, 18, 8

Answer:

The correct option is D

Explanation:

Firstly, let's define the periodicity of these terms and then draw  conclusion from there.

Ionization energy is the amount of energy required to remove an electron from a gaseous atom in it's ground state. This property increases across a group in the periodic table.

Electronegativity is the measure of the property/tendency of an atom to attract an electron. This property also increases across a period. Thus, elements that have high electronegativity also have a high ionization energy.

Atomic radius is however the distance between the central nucleus to the outermost electron. This property decreases across the period. Thus, as electronegativity and ionization energy increases, atomic radius decreases.

From the above, it can be deduced that the correct option is d

Answer:high,small

Explanation:

I have the same test and I got it right

In a closed system, the total energy before an energy transformation is greater than the total energy after it.

A closed system is a natural physical system that does not permit the movement of matter into or out of the system, while energy transfer is permitted in some situations, such as those found in physics, chemistry, or engineering.

A closed system is one that only allows the flow of energy; it forbids the exchange of matter. The heat can transfer when we boil water with a closed cover, but the matter cannot.

In a closed system, the overall energy is constant. The universe's overall energy is always changing. Mass may be used to store energy. In a closed system, energy may be transformed from one form to another.

Thus, option D is correct.

To learn more about closed system, follow the link;

https://brainly.com/question/14782983

#SPJ6

Answer:

red blood cell → heart tissue → circulatory system

Explanation:

The levels of organization from the simplest level of organization to the most complex is cell, tissue, organ, organ, organ system, and organism. Red blood cells are cells, heart tissue is tissue in the heart and the circulatory system is an organ system that ensures blood, oxygen, and nutrients are flowing through the body.

Red blood cell → heart tissue → circulatory system shows the  three human body parts in order from the simplest level of organization to the most complex.

Heart is a muscular organ which is present in most of the animals , it is responsible for pumping blood via the blood vessels to the entire body.The blood which is pumped carries oxygen and nutrients along with it.Along with it on it's way back to heart it carries carbon dioxide to the lungs.

Heart has an approximate size of a closed fist and is present between the lungs in the middle compartment of the chest. It is divided in to for chambers , the upper chambers called atria and lower ones called ventricles.

The wall of the heart is made up of three layers : epicardium,myocardium and endocardium. It pumps blood with a rhythm which is determined by a group of cells which are called the pacemaker cells present in the sinoatrial node.

Learn more about heart,here:

https://brainly.com/question/16566688

#SPJ6

Its called "Ammonium thiocyanate" Have a great day!! <3

Answer:

it is called Ammonium Thiocyanate or Thiourea

Explanation:

it is made made up of 2 nitrogen atoms, 4 hydrogen atoms, 1 sulfur atom and 1 carbon atom. stay safe and have a great day! TPWK

Answer:

Generally the ice should be more than 4 inches thick to skate on it safely. However, the ice thickness is not always even and there can be thin spots, especially near springs or near river inlets or outlets. Most lakes and ponds don't completely freeze because the ice (and eventually snow) on the surface acts to insulate the water below. Our winters aren't long or cold enough to completely freeze most local water bodies. This process of lakes turning over is critically important to the life in the lake.

Explanation:

Answer:

0.56 mL

Explanation:

Methane gas and chlorine gas react to form hydrogen chloride gas and carbon tetrachloride gas. What volume of carbon tetrachloride would be produced by this reaction if 1.1 mL of chlorine were consumed.

Step 1: Write the balanced equation

CH₄(g) + 2 Cl₂(g) → CCl₄(g) + 4 HCl (g)

Step 2: Calculate the moles corresponding to 1.1 mL of Cl₂

At standard temperature and pressure, 1 mole of a gas has a volume of 22.4 L.

1.1 × 10⁻³ L × 1 mol/22.4 L = 4.9 × 10⁻⁵ mol

Step 3: Calculate the moles of CCl₄ formed from 4.9 × 10⁻⁵ moles of Cl₂

The molar ratio of Cl₂ to CCl₄ is 2:1. The moles of CCl₄ are 1/2 × 4.9 × 10⁻⁵ mol = 2.5 × 10⁻⁵ mol.

Step 4: Calculate the volume corresponding to 2.5 × 10⁻⁵ moles of CCl₄

At standard temperature and pressure, 1 mole of a gas has a volume of 22.4 L.

2.5 × 10⁻⁵ mol × 22.4 L/mol = 5.6 × 10⁻⁴ L = 0.56 mL

Answer:

Explanation:

Ca₃( PO₄)₂ = 3 Ca⁺² + 2 PO₄⁻³

x                      3x            2 x

Let solubility be x mole per litre

solubility product = (3x )³ x ( 2x )²

= 108 x⁵ = 1.2 x 10⁻²⁹

x⁵ = .0111 x 10⁻²⁹ = .111 x 10⁻³⁰

x = .64 x 10⁻⁶ moles / litre