Thymine and adenine form a base pair in the DNA molecule. These two bases can form a connection between two strands of DNA via two hydrogen bonds. Which of the following diagrams shows the correct representation of the hydrogen bonding (denoted by dashed lines) between thymine and adenine base pairs? (In each diagram. thymine is shown at the left and adenine is shown at the right. The bases are attached to the backbone portion of the DNA strands.)

The structure of a molecule affects its physical properties because the arrangement of the atoms in the molecule determines the type of forces that interact between molecules.

And that forces affect how the molecules move and interact with each other. This, in turn, affects the physical properties of the molecule, such as its melting point, boiling point, polarity, and solubility.

For example, when a molecule has a higher number of non-polar bonds due to symmetrical structures, it will be less polar overall and have fewer attractive forces acting between molecules, resulting in a higher boiling point and lower solubility.

On the other hand, a molecule with a higher number of polar bonds due to asymmetrical structures will be more polar overall, leading to stronger attractive forces acting between molecules, resulting in a lower boiling point and higher solubility.

For more questions like Properties click the link below:

https://brainly.com/question/13562531

#SPJ4

Diatomic elements are elements that exist as pairs of atoms. Unlike other elemental substances, diatomic elements cannot exist as single atoms, but must exist as a pair of atoms bound together.

Elemental refers to an element or substance made up of one kind of atom, such as oxygen, carbon, or hydrogen. Elements are the basic building blocks of matter, and they are combined in different ways to form the molecules of different materials. Elemental substances are the most basic form of matter, and they are essential for life on Earth. There are currently 118 known elements, and they are found in nature and in many products. Each element has unique properties, and they can be used in different ways. For example, oxygen is essential for human respiration, while carbon is found in many materials, such as plastics and diamonds.

Examples of diatomic elements include nitrogen (N2), oxygen (O2), hydrogen (H2), chlorine (Cl2), fluorine (F2), and bromine (Br2).

To learn more about elemental
https://brainly.com/question/18096867
#SPJ4

As a result, option c is correct: H must be negative and S must be positive.

Energy is transmitted to or from the surroundings when a chemical reaction occurs. An exothermic reaction occurs when energy is transmitted to the surroundings, and the temperature of the surroundings rises. The term exothermic implies "heating up." As an exothermic process progresses, energy, frequently in the form of heat, is released. An exothermic reaction is one that is chemical in nature and is characterized by the release of energy in the form of heat or light. Matching a light with a matchstick is an example of this sort of reaction in which the release is both heat and light.

Here,

The spontaneity can be determined by the equation as:

ΔG=ΔH−TΔS

If the Gibbs free energy is negative, it gives a spontaneous reaction. Hence, the ΔH must be negative and ΔS must be positive.

If the Gibbs free energy is positive then it will be non-spontaneous. Hence, ΔS must be negative at very high temperature.

Therefore, option c is correct that is the ΔH must be negative and ΔS must be positive.

To know more about exothermic reaction,

https://brainly.com/question/10373907

#SPJ4

4-methyl-2-pentene s the expected major organic product from treatment of 4-methyl-2-pentyne with sodium metal in liquid ammonia.

The process includes hydrogenation of an alkyne to an alkene in liquid ammonia using sodium metal. This is a particular reaction that leads in the creation of trans alkene.  Alkynes are hydrocarbons with triple carbon-carbon bonds. For molecules with a single triple bond, their typical formula is CnH2n-2 (and no rings).

A number of the same reactions occur in alkynes as in alkenes, but they can react twice due to the existence of two p-bonds inside the triple bond. When sodium dissolves into liquid ammonia (boiling point -33 °C), it turns a vivid blue. When there are alkynes present, they have reduced to a trans (i.e. E) alkene.

To know more about the Ammonia, here

https://brainly.com/question/28393162

#SPJ4

When a 211-mL sample of a 0.285 M CaCl₂ solution is left on a hot plate overnight and the following morning, the solution is 1.25 M, the volume of water evaporated from the 0.285 M CaCl₂ solution is 48.108 ml.

Molarity (M) is defined as the ratio of the number of moles of solute present in a solution to the volume of the solution in litres.

given here,

Molarity of the original solution(M₁) = 0.285M

Volume of the original solution(V₁) = 211 ml

Molarity of  the solution in the morning (M₂) = 1.25 M

Volume of the solution in the morning (V₂) = ?

We will calculate the volume of the solution in the morning by using the formula:

M₁ × V₁ = M₂ × V₂

⇒0.285 M× 211 ml = 1.25 M × V₂

⇒V₂ = 0.285 M× 211 ml / 1.25 M

⇒V₂= 48.108ml

The volume of water evaporated from the 0.285M CaCl₂ solution is 48.108 ml.

To know more about volume of water evaporated here

https://brainly.com/question/13220835

#SPJ4

The Ideal Gas Law states that the volume of a gas is proportional to its temperature at constant pressure.

Pressure is a force that is applied to an object over an area. It is measured in units of force per unit area, such as Pascals (Pa). Pressure can be applied in a number of ways, such as by squeezing, pushing, or compressing. It can also be caused by the weight of an object, or the force of gravity. Pressure can be used to do work, such as moving an object or creating heat.

This means that if we double the temperature, we will double the volume. Therefore, if the temperature of the gas sample is raised from 200 K to 600 K, the volume of the gas sample will increase from 6.00 L to 12.00 L.

To learn more about Pressure
https://brainly.com/question/25736513
#SPJ4

The main function of the meter rule is to measure the distance between the two points , it is use to measure the length.

The first unit of the length is the meter. the length is defined as the distance between the two points.  the meter is used to measure the length in the international system of the units. the instrument used to measure the meter is the meter rule or the meter stick. the mete rule is also called as the ruler. before the meter rule of discovery we use the primitive methods to measure the distance.

Thus, the function of the meter is the to measure the distance between the two points.

To learn more about meter here

https://brainly.com/question/17687457

#SPJ4

0.5 moles are present in 20 grams of calcium.

The mole, which is denoted by the symbol "mol," is the volume of a system that includes as many elementary particles as there are atoms in 0.012 kilograms of carbon 12.

The number of atoms, molecules, or ions that make up one mole of a substance is 6.022 × 10²³ . The term "Avogadro's number" or "Avogadro's constant" refers to the number 6.022 × 10²³

Atomic Mass of Calcium = 40u

(Atomic Mass is same as Molar Mass, so)

Molar Mass of Calcium = 40g

Formula to find number of moles

Number of Moles = given mass / molar mass

                                = 20 / 40   = 0.5 moles

Therefore, 0.5 moles are present in 20 grams of calcium.

To know more about mole click here

https://brainly.com/question/15356425

#SPJ4

The complete question is

How many moles are there in 20 g of calcium

The prefixes you provided do not correspond to any known chemical element or compound. The prefixes used in chemistry typically come from Greek or Latin and indicate the number of atoms present in a molecule of a certain element or compound.

For example, "mono-" indicates 1 atom, "di-" indicates 2 atoms, "tri-" indicates 3 atoms, "tetra-" indicates 4 atoms, and so on. prefixes let me know if you have any other question

Mono - 1 - montui, chloride

di - 2 atoms - donde

tri - 3 atoms - triponthou

tetra - 4 atoms - tetrisdide

utra - 5 atoms - utracondo are prefixes .

Learn more about prefixes here:

https://brainly.com/question/13679502

#SPJ4

Answer:Angelica currently works on energy efficiency programs for Nexant, Inc, an Arizona-based company focused on clean energy solutions.

Explanation:

The smallest measurement you can make on the meter stick using the metric scale is the millimeter.

The millimeter is the smallest measurement on the meter stick . The millimeter is the smallest reading in the meter stick. we use the meter stick to simply measure the length. The meter reading is calibrated in the centimeters in the meter scale. the least count in the meter scale is the millimeters. we can measure the things as the length of the table or the width.

Thus, the smallest measurement in the meter stick using the meter scale is the millimeters. the symbol of the millimeters is mm.

To learn more about meter stick here

https://brainly.com/question/17687457

#SPJ4

Igneous rock  commonly often contains gas bubbles and the mineral(s) hornblende, muscovite, olivine, lucite, and/or plagioclase.

What are igneous rocks?

Igneous rocks are rocks that form when molten rock cools and solidifies, either below the Earth's surface or on its surface. They are the oldest type of rocks on the planet and are composed primarily of crystals. Examples of igneous rocks include basalt, gabbro, granite, obsidian, pumice, and scoria.

Igneous rocks form from cooling and crystallizing molten rock, or magma. As the magma cools, minerals crystallize out of the molten material, forming the igneous rock. Hornblende, muscovite, olivine, lucite, and/or plagioclase are all common minerals that form as the magma cools, due to their high melting points. Gas bubbles may also form as the magma cools, creating a "vesicular" texture.

To know more about igneous rocks,

https://brainly.com/question/18467164

#SPJ4

The number of coffee cups that would be required to fill the enormous coffee cup would be 32 cups.

The world's largest cup of coffee can hold 2010 gallons of coffee as recorded in Las Vegas.

A normal coffee cup will only hold as much as 237 mL of coffee. Recall that:

If 1 gallon = 3.78541 L

  2010 gallons = 2010 x 3.78541

                         = 7608.6741 L

In other words, the coffee cup with the record size will hold a maximum of 7608.6741 L of coffee while a normal coffee cup will only hold 237 mL. The problem now is the number of number coffee cups that will fill the world's record largest coffee.

7608.6741/237 = 32.10

Therefore, the number of normal coffee cups that would be required to fill the enormous coffee cup would be approximately 32 cups.

More on dimensional analysis can be found here: https://brainly.com/question/13078117

#SPJ1

The number of moles of Ag that forms from 5.0 moles of Zn is 10 moles.

The number of moles of a substance can be calculated stoichiometrically as follows;

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, silver nitrate reacts with zinc to produce silver and zinc nitrate as follows:

2AgNO₃ + Zn → 2Ag + Zn(NO₃)₂

Based on the equation above, 1 mole of Zn produces 2 moles of silver.

Hence, 5 moles of Zn will produce 10 moles of Ag.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

The product could have been lost if this experiment was conducted in a physical laboratory: Human Error, Incomplete Reaction, Inadequate Stirring, Impurities and Loss of Product.

Product is a tangible or intangible good that is produced for sale on the market.

1. Human Error: Inaccurate measurements or miscalculations during the experiment may have caused the percent yield not to be 100%.
2. Incomplete Reaction: Depending on the reaction conditions, it is possible that the reaction did not go to completion, leading to a lower percent yield than expected.
3. Inadequate Stirring: If the reactants were not adequately mixed during the experiment, some reactants may not have been able to properly react, resulting in a lower percent yield.
4. Impurities: If the reactants used in the experiment were impure, it could lead to a lower percent yield due to the presence of undesirable substances that can interfere with the reaction or are not involved in the reaction.
5. Loss of Product: If the experiment was conducted in a physical laboratory, it is possible that some of the product was lost during the experiment due to improper handling or other factors.

To learn more about product
https://brainly.com/question/29171025
#SPJ4

The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, the concentration of sulfate ion is 1.15 M.

Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.

K₂SO₄[tex]\rightarrow[/tex]2K⁺ + SO₄²⁻

concentration of potassium sulfate=concentration of potassium ion=concentration of sulfate ion

1.15 M =concentration of potassium ion=concentration of sulfate ion

Therefore, the concentration of sulfate ion is 1.15 M.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ1

Benzene (C6H6) burns in air to produce carbon dioxide and liquid water.The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.

Heat is the result of the movement of kinetic energy within a material or an item, or from an energy source to a material or an object. Radiation, conduction, and convection are the three mechanisms through which such energy can be transferred.

The movement of minuscule atoms, molecules, or ions in solids, liquids, and gases produces heat energy. From one thing to another, heat energy can be exchanged. Heat is the flow or transfer that occurs as a result of the temperature differential between two objects.

Reaction as follows;

2C6H6 + 15O2 → 12CO2 + 6H2O

2x49.04   2x10       12x-393.5  6x-285.8

= [ 12(-393.5 )+6(-285.8) ] - [ 2(49.04)+(2x10) ]

= - 6936.8 - 98

= - 6534.8 KJ/mole

Per gram of benzene

= ( -6534.8 KJ / 2 mole of C6H6) (1 mole of C6H6 / 78.108g )

= -41.83 KJ / mole

Thus, The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.

To learn more about heat, follow the link;

https://brainly.com/question/1429452

#SPJ1

Electrons stay in between the nuclei of the two hydrogen atoms because they are attracted to the positive charge of the nuclei.

Electrons are negatively charged species, so they are attracted towards the positive charge of a nucleus.

In hydrogen atom, when both the two hydrogen atoms get close to each other then the electrons of each atom will get attracted to both the nuclei. And if both the hydrogen atoms come close to each other they will repel each other.

The energy of the two hydrogen atoms becomes less when  they are together than when they are far apart.

Thus, the electrons tend to stay in between the nuclei of the two hydrogen atoms.

To know more about nuclei of two hydrogen atoms here

https://brainly.com/question/13570570

#SPJ4

Addition of soda (Na₂CO₃) to the vitrifying mixture produces glasses with excellent optical properties.

Silica is the common name for the compound silicon dioxide, which consists of one silicon atom and two oxygen atoms. It is an important component of many rocks, sands, and clays, and is also found in many plants and animals. Silica is used in a wide variety of products, from beer and wine to pottery, glass, and paint. It is also used in building materials such as concrete and mortar, and as a food additive. Silica is also used to make silicon-based electronics such as computer chips.

Adding lime (CaCO₃) to the vitrifying mixture creates a jar that can be used to bake or store the liquid medicine.

Addition of alumina (Al₂O₃) to a mixture undergoing vitrification produces a glass that is insoluble in water.

Addition of borax (Na₂B₄O₇) to the mixture during vitrification allows glass to be produced at much lower temperatures.

To know more about silica click-

https://brainly.com/question/28814012

#SPJ4

The proper IUPAC name for the compound is (2R,3S)-2,3-difluorohexane.

It is determined by following the IUPAC nomenclature rules for organic compounds. The key points for this are:

Learn more about IUPAC nomenclature here:

https://brainly.com/question/28872356

#SPJ4

There would be 13.9 moles of the water.

We know that we could be able to use the Avogadro's number so as to determine the number of the molecules. this would stem from the postulation that one  mole of the substances would in it about 6.02 * 10^23 molecules of the water.

We would now be able to say based on the information that have been passed above in the question;

1 mole of water would contain 6.02 * 10^23 molecules of the water

x moles of water would contain 8.37 x 10^24 molecules

x = 8.37 x 10^24 molecules * 1/6.02 * 10^23

x = 13.9 moles

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

The concentration of the final solution is 1.41[tex]\frac{mol}{L}[/tex].

Now, first calculate the number of moles of first solution:

[tex]M_{1} =\frac{no. of moles of solution}{total volume of solution}[/tex]

no. of moles we have to find

total volume is 0.0352L and molarity of solution is 1.66M

The total number of moles of solute present in a given solution per litre is known as its molarity. In contrast to mass, which varies as the system's physical circumstances vary, the volume of a solution changes as a function of changes in the system's physical qualities, such as pressure and temperature. This has an impact on the molality of the solution. The symbol M, sometimes known as a molar, denotes molarity.

[tex]1.66=\frac{n}{0.0352}[/tex]

on solving we get,

n=0.0584 mol

Now, find the number of moles of second solution by the same formula used to find the moles of first solution,

molarity of second solution is 0.892M and total volume is 0.0167L

Now, put the values in the formula,

[tex]0.892=\frac{m}{0.0167}[/tex]

On solving we get,

m=0.0149 mol

and to find the concentration of new solution number of moles is equal to the sum of moles of first solution and second solution.

x=m+n

x=0.0584+0.0149

x=0.0733 mol

Now, molar concentration is,

[tex]M=\frac{x}{V}[/tex]

[tex]M=\frac{0.0733}{0.352+0.0167}[/tex]

On solving we get,

M=1.41[tex]\frac{mol}{L}[/tex]

Learn more about molarity

brainly.com/question/8732513

#SPJ4

The syringes' circle measures area 10.17 square inches.

The area of a circle is the area that a circle occupies on a two-dimensional plane. The region contained by the circle's radius or perimeter is another way to define the circle's area. The circle's radius, or r, is equal to its diameter in half.

We need to calculate the area of the circle

You may determine the circle's surface area via

Change the formula's value for r.

Area of circle =π[tex]r^{2}[/tex]

Area of circle =3.14[tex]\times[/tex]1.80[tex]\times[/tex]1.80

Area of circle =10.17 [tex]cm^{2}[/tex]

Hence the area of the Circle is 10.17[tex]cm^{2}[/tex]

Learn more about area.

brainly.com/question/27683633

#SPJ4

The relationship between properties and substances is an important one as the properties define or describe the type, kind or composition of a substance. There are two factors that affect the properties of a substance and these are kinetic energies and intermolecular forces.

In chemistry, substances are categorized on the basis of physical and chemical properties. All the substances are composed of tiny particles which are in constant motion due to kinetic energy and keep moving in all directions in a substance.

In addition to this, intermolecular forces are also present in a substance which keeps the particles together. In this way substances maintain their shape, arrangement and properties such as melting point, boiling point, hardness, composition and color due to their particular properties.

If you need to learn more about substance click here:

https://brainly.com/question/24647756

#SPJ4

The total reduction potential of a cell in which sodium (Na) is reduced and zinc (Zn) is oxidized -1.95 V.

The tendency of a chemical species is to be reduced, expressed in volts under normal conditions, is known as the standard reduction potential.

The standard reduction potential belongs to the group of potentials known as standard electrodes or standard cells. The difference in voltage between the cathode and anode is known as the standard cell potential. The standard sodium reduction potential is -2.71V. Zinc has an average reduction potential of -0.76 V. Therefore, the overall reduction potential is 1.95 V.

Learn more about Reduction Potential

brainly.com/question/1313684

#SPJ4

The molecular weight of the unknown compound is 80.864g.

Only the solute's concentration affects freezing point depression; the solute's mass or chemical composition have no bearing. When it's cold outside, salt is often used to prevent ice from forming on roads by lowering the freezing point of water.

Depression in freezing point is Kb x m

T(f) - T  = Kb x  m

48.1 - 35.8 =  9.8 x m

m = 1.255

m = moles of solute x 1000/mass of solvent

moles of solute x 1000 / 10.0090  = 1.255

moles of solute = 0.0125

moles = mass / molar mass

1.0108  / molar mass  = 0.0125

molar mass =  1.0108 / 0.0125

molar mass = 80.864

so the molecular weight is 80.864g.

To know more about freezing point visit:

https://brainly.com/question/1550397

#SPJ4

The relative acidity of orange juice compared to pure water is 1000times. The relationship between acid strength and pH is inverse.

A scale that historically denoted "potential of hydrogen" was used to describe how basic or acidic an aqueous solution was. The pH values of acidic solutions are typically lower than those of basic or alkaline solutions. The pH scale can be used to gauge how strong an acid is. Higher pH values result in weaker acids, while lower pH values result in stronger acids. Therefore, we may conclude that the relationship between acid strength and pH is inverse.

Given the pH of orange juice = 4

Then concentration of orange juice (M1) = 10^-4M

pH of pure water = 7

The concentration of [H+] in water (M2) = 10^-7M

The relative pH = 10^-4/10^-7 = 10^3

Hence  its relative acidity compared to pure water is 1000 times.

To learn more about pH click here       https://brainly.com/question/491373

#SPJ4

The ratio of the container with PHe: PAr will be given as= 12.2/1

To know more about pressure here

https://brainly.com/question/22264785

#SPJ4

The ratio of PHe: PAr will be given as= 12.2/1

All pressures present in a reference system are added together to get the total pressure, or ptot. Bernoulli (see Fluid mechanics) defined this pressure as the sum of the static pressure (p), geodetic component (g, z) and dynamic pressure (pdyn), that exist in a fluid along with a stream line in a frictionless flow. The pascal (Pa), often known as kilograms per square meter per second (kg/m1s2), is the SI unit of pressure. Before 1971, pressure in SI was expressed in terms of newtons per square meter. You have static pressure, while a fluid is stationary or when you are moving with it. You would feel an equal amount of air pressure from all the sides.

To know more about pressure here

https://brainly.com/question/12971272

#SPJ4