None of these spectra will produce significant X-ray light, as the temperatures are not high enough to emit light at such short wavelengths (0.001 microns).
The spectrum for T=5000 K produces more light in the blue part of the visible spectrum.
The spectrum for T=5000 K produces more light in the blue part of the visible spectrum.
Among the blackbody spectra shown in Question 5, the spectrum for T=3000 K produces more light in the infrared part of the spectrum.
None of these spectra will produce significant X-ray light, as the temperatures are not high enough to emit light at such short wavelengths (0.001 microns).
To know more about visible spectrum. click here:
brainly.com/question/18704022
#SPJ11
A bullet of mass 0.093 kg traveling horizontally at a speed of 200 m/s embeds itself in a block of mass 3 kg that is sitting at rest on a nearly frictionless surface.a) What is the speed of the block after the bullet embeds itself in the block?b) Calculate the kinetic energy of the bullet plus the block before the collision:c) Calculate the kinetic energy of the bullet plus the block after the collision:d) Calculate the rise in thermal energy of the bullet plus block as a result of the collision:
The speed of the block after the bullet embeds itself in the block is 6.01 m/s. The kinetic energy of the bullet plus the block before the collision is 1866 J. The kinetic energy of the bullet plus the block after the collision is 111.3 J. The rise in thermal energy of the bullet plus block as a result of the collision is 1755.7 J.
A). The final momentum of the system is:
[tex]p_f[/tex] = (m_bullet + m_block) * [tex]v_f[/tex]
[tex]p_f[/tex] = (0.093 kg + 3 kg) * [tex]v_f[/tex]
[tex]p_f[/tex] = 3.093 kg * [tex]v_f[/tex]
[tex]p_i = p_f[/tex]
18.6 kg*m/s = 3.093 kg * [tex]v_f[/tex]
[tex]v_f[/tex]= 6.01 m/s
B). The kinetic energy of the bullet plus the block before the collision is:
[tex]K_i[/tex] = (1/2) * [tex]m{_bullet}[/tex] * v_bullet² + (1/2) *[tex]m{_block}[/tex] * 0²
[tex]K_i[/tex] = (1/2) * 0.093 kg * (200 m/s)²
[tex]K_i[/tex] = 1866 J
c) The kinetic energy of the bullet plus the block after the collision is:
[tex]K_f[/tex] = (1/2) * ([tex]m{_bullet}[/tex] + [tex]m{_block}[/tex]) *[tex]v_f[/tex]²
[tex]K_f[/tex] = (1/2) * 3.093 kg * (6.01 m/s)²
[tex]K_f[/tex] = 111.3 J
D) [tex]Delta_E = K_i - K_f[/tex]
[tex]Delta_E = 1866 J - 111.3 J[/tex]
[tex]Delta_E = 1755.7 J[/tex]
Momentum refers to the physical property of an object in motion that depends on both its mass and velocity. It is defined as the product of an object's mass and velocity and is a vector quantity, meaning it has both magnitude and direction. In other words, momentum is the measure of how much force an object can apply when it collides with another object.
According to the law of conservation of momentum, the total momentum of a system remains constant unless acted upon by an external force. This means that if two objects collide, the total momentum of the system before the collision is equal to the total momentum after the collision, even if the objects' velocities and directions change.
To learn more about Momentum visit here:
brainly.com/question/30677308
#SPJ4
How long (in ns) does it take light to travel 0.800m in vaccum?
Express your answer in the appropriate units
It takes approximately 2.67 ns for light to travel 0.800 meters in a vacuum.
Hi! To determine how long it takes light to travel 0.800 meters in a vacuum, we'll use the formula:
time = distance / speed of light
The speed of light in a vacuum is approximately 299,792,458 meters per second (m/s). First, we'll convert the speed of light to meters per nanosecond (m/ns):
1 m/s = 1 × 10⁻⁹ m/ns
299,792,458 m/s × (1 × 10⁻⁹ m/ns) = 0.299792458 m/ns
Now, we can calculate the time it takes light to travel 0.800 meters in a vacuum:
time = 0.800 m / 0.299792458 m/ns = 2.6682107 ns
So, it takes approximately 2.67 ns for light to travel 0.800 meters in a vacuum.
To know more about light refer here:
https://brainly.com/question/15200315
#SPJ11
find the force law for a central-force field that allows a particle to move in a spiral orbit given by r⫽ ku2 , where k is a constant.
The force law for a central-force field will be F= -kr^2dO/dt
To find the force law for a central-force field that allows a particle to move in a spiral orbit given by r = ku^2, we need to first understand what a central force is. A central force is a force that acts on a particle in such a way that it always points towards a fixed point in space, called the center of force. In other words, the force is radial in nature and depends only on the distance between the particle and the center of force.
Now, since the particle is moving in a spiral orbit, we can assume that there is a component of the force that is perpendicular to the radial direction. This component of the force is responsible for causing the particle to move in a spiral path rather than a circular one.
We can express the force law for this central-force field in terms of the distance r between the particle and the center of force, and the angle θ between the particle's position vector and a fixed reference direction. The force law can be written as:
F = -kr^2 dθ/dt
where k is a constant that depends on the strength of the force, and dθ/dt is the angular velocity of the particle.
This force law ensures that the force acting on the particle is always directed towards the center of force, and that the particle moves in a spiral orbit given by r = ku^2.
Visit https://brainly.com/question/13191643 To learn more about FoRce
#SPJ11
Roofs of houses are sometimes "blown off" during a tornado or hurricane. Explain using Bernoulli's principle.
The phenomenon of roofs of houses being blown off during a tornado or hurricane can be explained using Bernoulli's principle.
When wind flows over a roof, it creates an area of low pressure above the roof. According to Bernoulli's principle, where the speed of a fluid increases, the pressure within the fluid decreases.Therefore, as the wind speed over the roof increases, the air pressure above the roof decreases.
This creates a pressure difference between the top and bottom of the roof. The higher pressure below the roof pushes up on it, while the lower pressure above the roof pulls it upward.During a tornado or hurricane, the wind speed can increase rapidly, creating a large pressure difference between the top and bottom of the roof.
To know more about hurricane, click here.
https://brainly.com/question/18950883
#SPJ4
A rod suspended at its end acts as a physical pendulum and swings with a period of 1. 4 s. What is the length of this physical pendulum? Assume that g=9.8 m/s2
The length of this physical pendulum is [tex]1.207\ meters.[/tex] A rod suspended at its end acts as a physical pendulum and swings with a period of [tex]1. 4 s[/tex]
The formula for the period of a physical pendulum is:
[tex]T = 2\pi * \sqrt{L / g}[/tex]
The time period of a pendulum is the time it takes for one complete oscillation or swing. It is the time taken for the pendulum to return to its original starting position after being displaced and released.
where:
T = period of the pendulum,
L = length of the pendulum,
g = acceleration due to gravity,
Now, rearranging the formula to solve for L:
[tex]L = (g / (4\pi^2)) * T^2\\L = (9.8 / (4 * 3.14²)) * (1.4 )^2\\L = (9.8 / 39.478) * 1.96\\L = 1.207\ meters[/tex]
So, the length of this physical pendulum is [tex]1.207\ meters.[/tex]
To know more about the time period:
https://brainly.com/question/31824035
#SPJ12
1. for the rheostat, compute the values of resistance rh and voltage drop vh across the rheostat if, vt = 5.0v, the ammeter reads i = 0.056a, and the voltmeter reads vs = 1.69 v.
To compute the values of resistance rh and voltage drop vh across the rheostat, we can use the formula V = IR. Here, V is the voltage drop across the rheostat, I is the current flowing through the rheostat (which is the same as the ammeter reading of 0.056A), and R is the resistance of the rheostat (which we want to find).
So, we have V = IR, or Vh = I * rh. Substituting the given values, we get Vh = 0.056 * rh.
We also know that the total voltage across the circuit is 5.0V (given by vt), and the voltmeter reads a voltage drop of 1.69V across the rest of the circuit (i.e., not across the rheostat). So, the voltage drop across the rheostat is vt - vs = 5.0 - 1.69 = 3.31V.
Now we can use Ohm's law (V = IR) again to find the resistance of the rheostat: rh = Vh / I = 3.31 / 0.056 = 59.11 ohms.
Therefore, the value of resistance rh across the rheostat is 59.11 ohms, and the voltage drop vh across the rheostat is 0.056 * 59.11 = 3.31V.
To know more about rheostat refer here:
https://brainly.com/question/30649442#
#SPJ11
On a sunny day with no wind, you fill a balloon with helium and let it float away into the sky. Eventually, the balloon pops. This is because at high elevation:
At high elevation, the atmospheric pressure decreases as the air becomes less dense.
As the balloon rises higher, the pressure of the helium gas inside the balloon remains constant, while the pressure of the surrounding air decreases.
At some point, the pressure differential becomes too great for the balloon to withstand, and it will burst or pop.
This is because the balloon's material is only able to hold a certain amount of pressure before it becomes too much to handle and ruptures.
Additionally, the decrease in atmospheric pressure can cause the helium gas to expand, further increasing the pressure inside the balloon and potentially causing it to burst.
To know more about atmospheric pressure visit link :
https://brainly.com/question/28310375
#SPJ11
based on your results from the marble experiment, please answer the following questions: 1. what kind of collision is exhibited by the marbles in this experiment, and why?
The two sorts of collisions that marbles can experience are elastic collisions and inelastic collisions. Both the kinetic energy and the momentum of the objects colliding are conserved in an elastic collision.
What transpires when marbles collide in an elastic collision?The two marbles collided in an elastic manner in the preceding illustration. The second marble received all of the kinetic energy from the first marble.
What happens when a marble is thrown at a pile of marbles?Momentum is preserved in a collision, as stated by Newton's third law of motion. That implies that what is put in must come out. For this reason, only one marble exits the stack when you hit one into the stack. The pace remains unchanged.
To know more about collision visit:-
https://brainly.com/question/25945297
#SPJ1
how far does a rocket travel if it goes 100 m/s for 50 seconds?
a. 5000 meters
b. 500 meters
c. 2 meters
d. 0.5 meters
Answer: A
Explanation:
introduction and conclusion on determining the geometric method of adding vectors using parallelogram method
Introduction:
In physics and mathematics, vectors are quantities that have both magnitude and direction. Adding vectors is an essential operation in vector algebra, and there are different methods to achieve it. One of the most popular ways of adding vectors is the parallelogram method, which involves constructing a parallelogram using the vectors as adjacent sides and then finding the diagonal of the parallelogram.
Body:
The parallelogram method is a geometric method of adding vectors. It works on the principle that if two vectors are represented by adjacent sides of a parallelogram, then their sum is represented by the diagonal of the parallelogram. To use this method, draw two vectors as adjacent sides of a parallelogram, and then draw the diagonal from the initial point of the two vectors to the opposite corner of the parallelogram. The length and direction of the diagonal represent the magnitude and direction of the sum of the two vectors, respectively.
Conclusion:
The parallelogram method is an intuitive and straightforward way of adding vectors. It is particularly useful when dealing with two-dimensional vectors as it requires only basic geometric knowledge. However, it is not the most efficient method, especially when dealing with many vectors in three dimensions. Other methods, such as the component method, may be more appropriate in such cases. Nonetheless, the parallelogram method remains an essential tool in the study of vectors and provides a useful visualization of vector addition.
What are vectors?In mathematics and physics, a vector is a mathematical object that has both magnitude and direction. Geometrically, a vector can be represented as an arrow with a specified length and direction. Vectors are used to represent quantities that have both size and direction, such as velocity, force, and displacement.
They can be added, subtracted, and multiplied by scalar quantities (e.g., numbers) to produce new vectors that represent the resulting magnitude and direction. Vectors play a fundamental role in many areas of mathematics and physics, including calculus, linear algebra, mechanics, and electromagnetism, among others.
Learn about unit vectors here https://brainly.com/question/28028700
#SPJ1
1. Write down the definition of momentum. What is your Prediction 1-27 Does one car exert a larger force on the other or are both forces the same size? 2. 3. In Activity 1-1, why is the sign of force probe A reversed? 4. What is your Prediction 1-7 when the truck is accelerating? Does either the car or the truck exert a larger force on the other or are the forces the same size? 5. What makes the collision in Activity 2-1 "inelastic"?
Momentum is the product of an object's mass and velocity.
Both cars will exert the same force on each other during a collision, assuming they have equal mass and velocity.
The sign of force probe A is reversed in Activity 1-1 because it is measuring the force exerted by the car on the probe, rather than the force exerted by the probe on the car. By convention, forces exerted by an object are considered positive and forces exerted on an object are considered negative. When the truck is accelerating is that the truck will exert a larger force on the car, since it is the larger and more massive object. The car will still exert a force on the truck, but it will be smaller in comparison. The collision in Activity 2-1 is considered "inelastic" because some of the kinetic energy of the objects is lost during the collision, usually in the form of heat or deformation. This means that the objects may stick together or bounce off each other with less velocity than they had before the collision. In contrast, an "elastic" collision would result in the objects bouncing off each other with the same velocity and kinetic energy as before the collision.
Learn more about Momentum here: https://brainly.com/question/27988315
#SPJ11
A 26.5 kΩ resistor connected to an AC voltage source dissipates an average power of 0.800 W. HINT (a) Calculate the rms current in the resistor (in A). (b) Calculate the rms voltage of AC source (in V).
(a) The rms current in the resistor is 6.11 mA.
(b) The rms voltage of the AC source is 161.8 V.
To find the rms current (I) in the resistor, we use the formula P = I²R, where P is the average power (0.800 W) and R is the resistance (26.5 kΩ).
Step 1: Rearrange the formula to solve for I: I = √(P/R)
Step 2: Convert the resistance to ohms: 26.5 kΩ = 26500 Ω
Step 3: Plug the values into the formula: I = √(0.800 W / 26500 Ω) = 6.11 x 10⁻³ A, or 6.11 mA.
To find the rms voltage (V) of the AC source, we use the formula V = IR.
Step 4: Plug the values into the formula: V = (6.11 x 10⁻³ A) x (26500 Ω) = 161.8 V.
To know more about average power click on below link:
https://brainly.com/question/30888338#
#SPJ11
using the relationship obtained in part f, evaluate the acceleration of the model rocket at times t0=0.0s , t1=1.0s , and t2=2.0s .
The rocket acceleration at time t2 = 2.0 s equals -12.5 m/s2. Noting the negative sign, it should be noted that the rocket is currently decelerating (slowing down).
evaluate the model rocket's acceleration sometimes.We can use the following equation to get the acceleration at each time because we know the rocket's velocity at times t0, t1, and t2 from section (e):
a = (v2 - v1) / (t2 - t1)
where the speeds at intervals t1 and t2, respectively, are denoted by v1 and v2.
The rocket's velocity is v0 = 0.0 m/s at time t0 = 0.0 s, hence the aforementioned equation cannot be used to get the acceleration. However, we can get the acceleration at those points by using the beginning velocity and ultimate velocity at t1 = 1.0 s and t2 = 2.0 s, respectively.
At t1 = 1.0 s:
v1 = 10.0 m/s
v2 = 25.0 m/s
The formula for an is: a = (v2 - v1) / (t2 - t1) = (25.0 m/s - 10.0 m/s) / (2.0 s - 1.0 s) = 15.0 m/s2.
Consequently, the rocket accelerates at a rate of 15.0 m/s2 at time t1 = 1.0 s.
At t2 = 2.0 s:
v1 = 25.0 m/s
v2 = 0.0 m/s
t1 = 2.0 s t2 = 4.0 s
a = (v2 - v1)/(t2 - t1) = (0.0 - 25.0 m/s)/(4.0 - 2.0 s) = -12.5 m/s2
To know more about velocity-time relationship visit:
https://brainly.com/question/30479674
#SPJ1
A woman weighing 60 kg drinks the equivalent of 60 g of ethanol. Her peak plasma concentration was found to be 1.91 g / L. Assuming that 55% of the woman's weight is water, what is the volume of water per kilogram?
A). 0.55 L / kg
B) 0.52 L / kg
C) 55.0 L / kg
D) none of these
Volume of water per kilogram is 0.55 L
To find the volume of water per kilogram, we first need to find the total volume of water in the woman's body. We know that 55% of her weight is water, so:
Total water volume = 0.55 x 60 kg = 33 L
Next, we need to subtract the volume of ethanol from the total water volume to find the volume of water per kilogram:
Ethanol volume = 60 g ÷ 0.789 g/mL = 75.96 mL = 0.07596 L
Total water volume - ethanol volume = 33 L - 0.07596 L = 32.924 L
Now we can divide the total water volume by the woman's weight to find the volume of water per kilogram:
Volume of water per kilogram = 32.924 L ÷ 60 kg = 0.548 L/kg
So the answer is A) 0.55 L/kg, rounded to the nearest hundredth.
To learn more about weight https://brainly.com/question/86444
#SPJ11
A
b A wind blows steadily at 90° to a yacht sail of area 3.8 m². The velocity of the
wind is 20 ms-1.
i Show that the mass of air hitting the sail each second is approximately
90 kg. Density of air is 1.2 kg m-³.
Answer: 90Kg
Explanation:
The mass of air hitting the sail each second can be calculated as:
mass of air = density of air * volume of air
The volume of air hitting the sail can be calculated as:
volume of air = area of sail * velocity of wind * time
Here, the area of sail is given as 3.8 m², the velocity of wind is 20 ms^-1, and the time is 1 second (since we want to calculate the mass of air hitting the sail each second).
Therefore,
volume of air = 3.8 m² * 20 ms^-1 * 1 s = 76 m³
Using the given density of air of 1.2 kg m^-3, we can calculate the mass of air hitting the sail each second as:
mass of air = 1.2 kg m^-3 * 76 m³ = 91.2 kg
Therefore, the mass of air hitting the sail each second is approximately 90 kg.
n moles of an ideal diatomic gas with internal energy E = =nRT are taken through the cyclic process shown on the P-V diagram where P1=2P3 and V2=2V3. V2 a) What are the values of work W, change in internal energy AEint, and heat transfer Q in process 1-2? Express your answers in terms of P3 and V3. b) What are the values of work W, change in internal energy AEint, and heat transfer Q in process 2-3? Express your answers in terms of P3 and V3. c) What are the values of work W, change in internal energy AEint, and heat transfer Q in process 3-1? Express your answers in terms of P3 and V3. d) Calculate the efficiency of the cycle.
a. Therefore, we have: ΔEint = 2P3(V1 - 2V3).
b. Q = ΔEint = (4/5)nCv(T2 - T3) = (4/5)nR(T2 - T3).
c. Therefore, we have: ΔT = T1 - T3 = (P1V1 - P3V3)/nR = (2P3V1 - P3V3)/nR = P3(V1 - V3)/nR and Q = ΔEint + W = nCv(T1 - T3) + 2P3(V1 - V3)
d. In step two of the process, the diatomic gas expands isobarically from volume V1 to volume V2, then cools isochronally from V2 to V3.
a. The work done in process 1-2 is given by:
W = P1(V2 - V1)
Since P1 = 2P3 and V2 = 2V3, we have:
W = 2P3(2V3 - V1)
The change in internal energy in process 1-2 is given by:
ΔEint = Q - W
Q = P1(V2 - V1) = 2P3(2V3 - V1)
b) In process 2-3, the gas is undergoing an isochoric heating from volume V3 to volume V2, followed by an isobaric compression from volume V2 to volume V1.
The work done in process 2-3 is zero since the volume is constant.
The change in internal energy in process 2-3 is given by:
ΔEint = Q - W
Since the process is isochoric, the heat transfer Q is given by:
Q = ΔEint = nCvΔT = nCv(T2 - T3)
PV = nRT
For a diatomic gas, we have:
Cv = (5/2)R/2 = (5/4)R
Substituting for P and V, we have:
Cv(T2 - T3) = (5/4)nR(T2 - T3) = (5/4)ΔEint
Therefore, we have:
Q = ΔEint = (4/5)nCv(T2 - T3) = (4/5)nR(T2 - T3)
c) In process 3-1, the gas is undergoing an isobaric compression from volume V3 to volume V1, followed by an isochoric heating from volume V1 to volume V2.
The work done in process 3-1 is given by:
W = P1(V1 - V3) = 2P3(V1 - V3)
The change in internal energy in process 3-1 is given by:
ΔEint = Q - W
Process is isochoric, the heat transfer Q is given by:
Q = ΔEint = nCvΔT = nCv(T1 - T3)
ΔT = T1 - T3
From the ideal gas law, we have:
PV = nRT
Substituting for P and V, we have:
T = PV/nR
Therefore, we have:
ΔT = T1 - T3 = (P1V1 - P3V3)/nR = (2P3V1 - P3V3)/nR = P3(V1 - V3)/nR
Q = ΔEint + W = nCv(T1 - T3) + 2P3(V1 - V3)
d) The efficiency of the cycle is given by:
η = (Wnet / QH) x 100%
Learn more about diatomic gas visit: brainly.com/question/31631121
#SPJ4
find the index of refraction in a medium in which the speed of light is 2.00 108 m/s.
The index of refraction in a medium is 1.50 in which the speed of light is 2.00 [tex]10^8[/tex] m/s.
The index of refraction of a medium is defined as the ratio of the speed of light in a vacuum to the speed of light in that medium. Therefore, if the speed of light in a medium is 2.00 × [tex]10^8[/tex] m/s, we can find the index of refraction by dividing the speed of light in a vacuum (which is approximately 3.00 × [tex]10^8[/tex]m/s) by the speed of light in the medium:
Index of refraction = speed of light in vacuum / speed of light in medium
Index of refraction = 3.00 × [tex]10^8[/tex]m/s / 2.00 × [tex]10^8[/tex]m/s
Index of refraction = 1.50
Therefore, The index of refraction in a medium is 1.50.
To know more about index of refraction refer here :
https://brainly.com/question/12469161
#SPJ11
The index of refraction in a medium is 1.50 in which the speed of light is 2.00 [tex]10^8[/tex] m/s.
The index of refraction of a medium is defined as the ratio of the speed of light in a vacuum to the speed of light in that medium. Therefore, if the speed of light in a medium is 2.00 × [tex]10^8[/tex] m/s, we can find the index of refraction by dividing the speed of light in a vacuum (which is approximately 3.00 × [tex]10^8[/tex]m/s) by the speed of light in the medium:
Index of refraction = speed of light in vacuum / speed of light in medium
Index of refraction = 3.00 × [tex]10^8[/tex]m/s / 2.00 × [tex]10^8[/tex]m/s
Index of refraction = 1.50
Therefore, The index of refraction in a medium is 1.50.
To know more about index of refraction refer here :
https://brainly.com/question/12469161
#SPJ11
For high-pass shelving filters: if you run the frequency response high enough, it eventually rolls off. Give two possible sources of a low-pass pole.
For high-pass shelving filter, if you run the frequency response high enough, it eventually rolls off due to the nature of the filter's design. This means that at very high frequencies, the filter will start to attenuate the signal, effectively acting as a low-pass filter.
Two possible sources of a low-pass pole in a high-pass shelving filter include the capacitor and the op-amp. Capacitors have a tendency to act as low-pass filters due to their inherent frequency-dependent impedance. Additionally, op-amps can introduce a low-pass pole into the circuit due to their finite gain bandwidth product and the effect of the feedback network on the circuit's frequency response.
Two possible sources of a low-pass pole are:
1. Parasitic capacitance: Unintended capacitance that forms between components or traces on a circuit board can create a low-pass pole, as it causes the high-frequency signal to be attenuated.
2. Component limitations: The frequency response of active components like op-amps or transistors can limit the bandwidth of a filter. As the frequency increases, these components may not respond quickly enough, resulting in a low-pass pole.
These factors can cause the high-frequency response of a high-pass shelving filter to roll off.
Learn more about filter here:
https://brainly.com/question/30666614
#SPJ11
integrate both sides of the equation dq(t)q(t)−ce=−dtrc to obtain an expression for q(t) . express your answer in terms of any or all of e , r , t , and c . enter exp(x) for ex .
The expression for q(t) is q(t) = exp(cet - dtrct + C₁), in terms of e, r, t, and c.
To integrate both sides of the equation dq(t)q(t) - ce = -dtrc and obtain an expression for q(t) in terms of e, r, t, and c, follow these steps,
1. Rewrite the equation as: (dq(t)/q(t)) - (ce) = -dtrc
2. Integrate both sides with respect to t:
∫[(1/q(t))dq(t) - ce dt] = ∫[-dtrc dt]
3. Perform the integration:
ln|q(t)| - cet = -dtrct + C₁ (where C₁ is the constant of integration)
4. Isolate ln|q(t)|:
ln|q(t)| = cet - dtrct + C₁
5. Take the exponential of both sides to solve for q(t):
q(t) = exp(cet - dtrct + C₁)
In terms of e, r, t, and c, the expression for q(t) is therefore q(t) = exp(cet - dtrct + C1).
Learn more about "integration": https://brainly.com/question/22008756
#SPJ11
toge
e
6. Refer to the illustration below.
90
www
R₂ 1513
www
R₂ 1013
a. what is the total power in the circuit?
b. What is the total resistance of this
circuit?
The total resistance of this circuit is 15Ω and the total power of the circuit is 60W.
The power is the ratio of the square of voltage and resistance. The total resistance is obtained from the addition of series and parallel resistance.
From the given,
Total resistance (Requ) = R₁ + R₂
R₁ is a series resistance
R₂ is the parallel resistance
R₂ = 1/15 Ω + 1/10 Ω
= 10×15 / (15+10)
= 150 / 25
= 6Ω
Parallel resistance R₂ = 6Ω
R(equivalent) = R₁ + R₂
= 9 + 6
= 15Ω
Thus, the total resistance is 15 Ω.
The total power, P = E² / R(equivalent)
E represents the voltage
R(equivalent) is the equivalent resistance
P = 30×30 / 15
= 60 watts.
Thus, the total power in the circuit is 60 watts.
To learn more about resistance and power:
https://brainly.com/question/15097628
#SPJ1
A rectangular block is at rest on a rough horizontal surface. A string is attached to one end of the block. You pull on the string (parallel to the surface) and the block does not move. Draw a free body-diagram to show all the forces acting on the block and use the relative size of your arrow vectors to represent the magnitude. Label all forces. How do the magnitudes of the forces compare to each other?
The free body-diagram for the block would show the force of gravity acting downwards on the block surface, which would be represented by an arrow pointing downwards with a size relative to the magnitude of the force.
There would also be a normal force acting upwards on the block, which would be represented by an arrow pointing upwards with a size relative to the magnitude of the force. Additionally, there would be a force of friction acting in the opposite direction of the applied force, which would be represented by an arrow pointing to the left with a size relative to the magnitude of the force. The force of the string pulling on the block would also be represented by an arrow pointing to the right with a size relative to the magnitude of the force.
The magnitudes of the forces would be balanced since the block is at rest and not moving. Therefore, the force of the string pulling on the block would be equal in magnitude and opposite in direction to the force of friction acting on the block. Similarly, the force of gravity acting downwards on the block would be equal in magnitude and opposite in direction to the normal force acting upwards on the block surface.
Learn more about surface here
https://brainly.com/question/30113326
#SPJ11
A circular loop rotates at a constant speed about an axle through the center of the loop. The figure below shows an edge view and defines the angle o, which increases from 0° to 360° as the loop rotates. There is a uniform, background magnetic field. For what range of angles of o is the induced current in the loop clockwise when viewed from below? For what range of angles of o is the induced current in the loop counterclockwise when viewed from below?
As a result, when viewed from below, the induced current in the loop is clockwise for angles between 0° and 180° and counterclockwise for angles between 180° and 360°.
The magnetic flux through the loop shifts in the direction indicated by the arrow as the loop revolves counterclockwise. Lenz's law states that the magnetic field created by the loop's generated current will resist this change in flux.
When seen from below, the induced current will flow counterclockwise over the range of angles from 0° to 180°. When viewed from below, the induced current will be counterclockwise over the 180° to 360° range of angles. This is owing to the fact that the magnetic flux has changed due to rotation and is now rotating clockwise.
Learn more about induced current visit: brainly.com/question/15449537
#SPJ4
Correct Question:
A circular loop rotates at a constant speed about an axle through the center of the loop. The figure below shows an edge view and defines the angle o, which increases from 0° to 360° as the loop rotates. There is a uniform, background magnetic field. For what range of angles of o is the induced current in the loop clockwise when viewed from below? For what range of angles of o is the induced current in the loop counterclockwise when viewed from below?
What is the torque by the fire extinguisher about the center of the seesaw, in N-m? Use g = 10 m/s^2.
The torque by the fire extinguisher about the center of the seesaw is 150 N-m. This torque causes a counterclockwise rotation of the seesaw.
To find the torque by the fire extinguisher about the center of the seesaw, we need to use the formula for torque, which is given by torque = force x lever arm.
Here, the force acting on the seesaw is the weight of the fire extinguisher, which is given by 10 kg x 10 m/s² = 100 N. The lever arm is the distance from the center of the seesaw to where the force is applied.
Since the fire extinguisher is at the end of one side of the seesaw, the lever arm is half the length of the seesaw, or 1.5 meters. Thus, the torque is given by torque = 100 N x 1.5 m = 150 N-m.
Therefore, the torque by the fire extinguisher about the center of the seesaw is 150 N-m.
To know more about the torque refer here :
https://brainly.com/question/25708791#
#SPJ11
A person standing barefoot on the ground 20 m from the point of a lightning strike experiences an instantaneous potential difference of 300 V between his feet.
if we assume the sum of the skin resistance on both legs is 1.0 kω , how much current goes up one leg and back down the other?
Current goes up one leg and back down the other leg experiences is 0.15 A
Given the potential difference (V) between the person's feet is 300 V and the sum of the skin resistance on both legs (R) is 1.0 kΩ, we can calculate the current (I) using Ohm's Law: V = IR.
I (the amount of current flowing through a conductor) = V (the potential difference applied to the ends) divided by R (resistance) is the formula for Ohm's law.
Rearrange the formula to solve for I: I = V/R.
Plug in the given values: I = 300 V / 1,000 Ω.
The current flowing through the person's legs is 0.3 A (amperes). Since the current goes up one leg and back down the other, each leg experiences half of the total current. Therefore, each leg experiences 0.15 A.
Learn more about Ohm's Law here
https://brainly.com/question/1247379
#SPJ11
The batteries of a submerged non-nuclear submarine supply 1000 A at full speed ahead. How long does it take to move Avogadro's number (6.02×1023) of electrons at this rate?
It would take 96.32 seconds (or just over 1.5 minutes) to move Avogadro's number of electrons at a current of 1000 A.
To calculate the time it takes to move Avogadro's number of electrons at a current of 1000 A, we first need to determine the charge of a single electron. The charge of an electron is approximately 1.6 × 10^-19 coulombs.
Avogadro's number of electrons is 6.02 × 10^23. Therefore, the total charge of Avogadro's number of electrons is:
6.02 × 10^23 electrons x 1.6 × 10^-19 coulombs/electron = 9.632 × 10^4 coulombs
We know that the batteries of the submarine supply a current of 1000 A, which means they provide a charge of 1000 coulombs per second. Therefore, the time it takes to move the charge of Avogadro's number of electrons at this current is:
Time = Total Charge / Current
Time = 9.632 × 10^4 coulombs / 1000 A
Time = 96.32 seconds
So it would take 96.32 seconds (or just over 1.5 minutes) to move Avogadro's number of electrons at a current of 1000 A.
To know more about electrons refer here:
https://brainly.com/question/1255220
#SPJ11
In an integrated circuit, the current density in a2.2-μm-thick × 80-μm-wide gold film is 7.9×105 A/m2 .How much charge flows through the film in 15 min?
The 125.1 coulombs of charge flow through the gold film in 15 minutes.
We can use the equation for current density (J) to find the current (I) flowing through the gold film:
J = I/A
where A is the cross-sectional area of the gold film, given by:
A = t x w
Substituting the given values, we get:
[tex]A = (2.2 \times 10^{-6} m) \times (80 \times 10^{-6} m) = 1.76 \times 10^{-7} m^2I = J \times A = (7.9 \times 10^5 A/m^2) \times (1.76 \times 10^{-7} m^2) = 0.139 AQ = I \times t[/tex]
Substituting the given values, we get:
Q = (0.139 A) x (15 x 60 s) = 125.1 C
Coulombs is named after the French physicist Charles-Augustin de Coulomb who discovered Coulomb's law, which describes the electrostatic interaction between electrically charged particles. Coulombs are used to measure the amount of electric charge in a system, such as in a capacitor or in an electric current.
The Coulomb is an essential unit of measurement in fields such as electrical engineering, physics, and electronics. It is used to quantify the amount of charge that is involved in a wide range of electrical phenomena, including the attraction or repulsion of charged particles, the flow of electricity through a conductor, and the charging of a battery or capacitor.
To learn more about Coulombs visit here:
brainly.com/question/15167088
#SPJ4
a wire 2.22 m long carries a current of 10.7 a and makes an angle of 40.4° with a uniform magnetic field of magnitude b = 1.99 t. calculate the magnetic force on the wire.
Answer:
47.86 N
Explanation:
The magnetic force on a current-carrying wire in a magnetic field is given by the formula:
F = BIL sinθ
where F is the magnetic force, B is the magnetic field, I is the current, L is the length of the wire, and θ is the angle between the wire and the magnetic field.
Substituting the given values, we get:
F = (1.99 T) x (10.7 A) x (2.22 m) x sin(40.4°)
F = 47.86 N
Therefore, the magnetic force on the wire is 47.86 N, in the direction perpendicular to both the magnetic field and the wire.
*IG:whis.sama_ent
Question 3 of 15
circular motion occurs when an object is traveling with
constant speed in a circle.
The concept of "centripetal motion" does not exist. The word "centripetal," which exclusively refers to forces or accelerations that are directed toward a center, literally means "seeking the center."
Circular motionAn object moving in a circle must inevitably accelerate toward the center of the circle; by "accelerate," we merely mean that the item's velocity is changing, which it must do in order to prevent the object from flying off in an unintended direction.Simple geometry can be used to demonstrate that, in the exceptional situation of an item moving in a circle at a constant speed, the acceleration must necessarily point in the direction of the center and be equal in magnitude to the square of the speed divided by the radius of the circle. In the more general scenario of an object travellingFor more information on circular motion kindly visit to
https://brainly.com/question/2285236
#SPJ1
A current-carrying rectangular coil of wire is placed in a magnetic field. The magnitude of the torque on the coil is NOT dependent upon which one of the following quantities?
(a) the direction of the current in the loop
(b) the magnitude of the current in the loop
(c) the area of the loop
(d) the orientation of the loop
(e) the magnitude of the magnetic field
The magnitude of the torque on the coil is NOT dependent upon (b) the magnitude of the current in the loop.
Understanding the torque on the coilThe torque on the coil is directly proportional to the product of the magnetic field strength and the area of the loop, as well as the sine of the angle between the magnetic field and the normal to the loop.
The direction of the current in the loop, the area of the loop, the orientation of the loop, and the magnitude of the magnetic field all affect the angle between the magnetic field and the normal to the loop, but not the magnitude of the torque.
Learn more about magnetic field at
https://brainly.com/question/12969925
#SPJ11
In Many European Homes The Rms Voltage Available From A Wall Socketis 240 V. What Is The Maximum Voltage In This Case?
European Homes Rms Voltage Available From A Wall Socketis 240 V. The Maximum Voltage is 339.4V.
In many European homes, the RMS voltage available from a wall socket is 240V.The maximum voltage, or peak voltage, can be calculated using the formula V_peak = V_RMS ×√2.
=240×√2
=339.4V
The breakdown voltage of the junction, or the voltage at which the junction operates, determines the maximum collector voltage required to maintain the collector-base junction's reverse bias.
In a bipolar junction transistor (BJT), the collector-base junction functions as a switch to permit or disallow current flow between the collector and base terminals. The voltage across the collector-base junction must stay below the junction's breakdown voltage in order to retain the reverse bias arrangement. The greatest voltage that the junction can withstand under reverse bias before switching to forward bias and allowing current to flow is known as the breakdown voltage, sometimes known as the peak inverse voltage (PIV).
Learn more about voltage here
https://brainly.com/question/30506645
#SPJ11