there do u know it.............

Answer:

c

Explanation:

it has its own mechanical filter making the air clean

Answer:

There are 5 pieces to each fillet weld known as the root, toe, face, leg and throat. The root of the weld is the part of deepest penetration which is the opposite angle of the hypotenuse.

Answer:

a. The thermal efficiency of the actual cycle is 45%

ii) The rate at which energy is rejected by heat transfer to the cold reservoir  is 0.55 MW

b. The (maximum) cycle efficiency, is 50%

The rate of energy rejection to the cold reservoir by heat transfer is 0.55 MW

Therefore, there is an increased efficiency and reduced heat rejection in the reversible power cycle working between the given two reservoirs

Explanation:

The given parameters are;

The temperature of the hot reservoir, [tex]T_H[/tex] = 600 K

The temperature of the hot reservoir, [tex]T_C[/tex] = 300 K

The power output, [tex]\dot W[/tex] = 0.45 MW = The cycle work per second

The heat input from the hot reservoir, [tex]\dot Q_{in}[/tex] = 1 MW

a. The thermal efficiency of the actual cycle is given by the work done divided by the heat supplied as follows;

[tex]\eta_{actual} = \dfrac{\dot W}{\dot Q_{in}}[/tex]

Therefore, we have;

[tex]\eta_{actual} = \dfrac{0.45 \ MW}{1 \ MW} = 0.45 = 45 \%[/tex]

The thermal efficiency of the actual cycle, [tex]\eta_{actual}[/tex] = 45%

ii) The rate at which energy is rejected by heat transfer to the cold reservoir,  [tex]\dot Q_{c}[/tex], is given as follows;

[tex]\dot Q_{in}[/tex] = [tex]\dot Q_{c}[/tex] + [tex]\dot W[/tex]

∴ [tex]\dot Q_{c}[/tex]  = [tex]\dot Q_{in}[/tex] - [tex]\dot W[/tex]

Therefore, we have;

[tex]\dot Q_{c}[/tex]  = 1 MW - 0.45 MW = 0.55 MW

The rate at which energy is rejected by heat transfer to the cold reservoir,  [tex]\dot Q_{c}[/tex] = 0.55 MW

b. For a reversible power cycle, we have the maximum cycle efficiency, [tex]\eta_{maximum}[/tex], given as follows;

[tex]\eta_{maximum} = \dfrac{T_H - T_C}{T_H}[/tex]

[tex]\therefore \eta_{maximum} = \dfrac{600 \, K - 300 \, K}{600 \, K} = 0.5 = 50\%[/tex]

The maximum cycle efficiency, [tex]\eta_{maximum}[/tex] = 50%

The rate of work done by the cycle, [tex]\dot W[/tex], is therefore give as follows;

[tex]\eta_{maximum} = \dfrac{\dot W}{\dot Q_{in}}[/tex]

Therefore;

[tex]\dot Q_{in}[/tex] × [tex]\eta_{maximum}[/tex] = [tex]\dot W[/tex]

1 MW × 50% = 0.5 MW = [tex]\dot W[/tex]

[tex]\dot W[/tex] = 0.5 MW

[tex]\dot Q_{c}[/tex]  = [tex]\dot Q_{in}[/tex] - [tex]\dot W[/tex]

∴  [tex]\dot Q_{c}[/tex] = 1 MW - 0.5MW = 0.5MW

[tex]\dot Q_{c}[/tex] = 0.5MW

The rate of energy rejection to the cold reservoir by heat transfer, [tex]\dot Q_{c}[/tex] = 0.55 MW

Therefore the frequency and the rate at which energy is rejected by heat transfer to the cold reservoir are both higher for the reversible power cycle

Answer:

Step 1 - Take Down the Rope Lights. You will first have to remove the rope lights from their position.

Step 2 - Assess the Damage. Remove the insulating material from around the edge of the broken part of the rope.

Step 3 - Solder the Wire.

Step 4 - Add Insulation.

Step 5 - Test Your Repair.

Explanation:

Answer:

C.)Charles is an Industrial Production Manager, Clarissa is a Medical Equipment repairer, and Francine is a Quality Control Analyst.

Explanation: