The level of significance (α) is 0.01.
The value of the chi-square statistic for the sample is 15.15.
Degrees of freedom (df) is 4.
(a) Level of significance: The level of significance for a hypothesis test is the probability level at which you reject the null hypothesis.
It is usually denoted by α and is set before conducting the experiment.
Given a 1% level of significance, the level of significance (α) is 0.01.
(b) Value of the chi-square statistic: We can calculate the chi-square statistic using the formula below:
[tex]\[X^2=\sum\limits_{i=1}^n\frac{(O_i-E_i)^2}{E_i}\][/tex]
where Oi is the observed frequency for the ith category and Ei is the expected frequency for the ith category.
We can use the observed data to find the expected frequency for each category using the formula below:
[tex]\[E_i = n \times P_i\][/tex]
where n is the total sample size, and Pi is the regional percent of stone tools for the ith category.
The expected frequencies are shown in the table below:
Raw material-Regional percent of stone tools-Observed number of tools as current excavation site
Expected frequency Basalt: 61.3%-905-911.88
Obsidian: 10.6%-150-157.16
Welded Tuff: 11.4%-162-165.99
Pedernal chart: 13.1%-207-193.68
Other: 3.6%-62-56.29
Total: 100%-1486-1485.00
We can now use the formula for the chi-square statistic to find the value of X2:
[tex]\[X^2=\frac{(905-911.88)^2}{911.88}+\frac{(150-157.16)^2}{157.16}+\frac{(162-165.99)^2}{165.99}+\frac{(207-193.68)^2}{193.68}+\frac{(62-56.29)^2}{56.29}\][/tex]
[tex]= 15.15[/tex]
Therefore, the value of the chi-square statistic for the sample is:
X2 = 15.15. (Rounded to two decimal places).
Degrees of freedom: Degrees of freedom (df) can be calculated using the formula below:
[tex]\[df = n - 1\][/tex]
where n is the number of categories. In this case, we have 5 categories, so,
df = 5 - 1
= 4
To know more about degrees of freedom, visit :
https://brainly.com/question/30403653
#SPJ11
Oliver just accepted a job at a new company where he will make an annual salary of
$54000. Oliver was told that for each year he stays with the company, he will be
given a salary raise of $3000. How much would Oliver make as a salary after 6 years
working for the company? What would be his salary after t years?
Answer:
After 6 Years: 54000*6 + 3000*5 = 339,000
After t years: 54000*t + 3000*(t-1) = 57000 t - 3000
==============
Please give brainliest, I really want to rank up, thank you!
Answer:
$358,000
Step-by-step explanation:
He makes $54k dollars "annual" = per year
Each year he stays he gets $3k worth of a raise
He stays 6 years so
3000 x 6 = 18k
54,000 x 6= 340,000
so then you just add
18,000 + 340,000=
358,000
I hope that helps :D
Let x = 9a - 7, where a is an integer. What is x mod 3?
For x = 9a - 7, where a is an integer, the value of x mod 3 is determined using the remainder when x is divided by 3, and it is equal to 2.
To find the value of x mod 3, we need to determine the remainder when x is divided by 3.
The expression x = 9a - 7, where a is an integer, allows us to calculate x mod 3.
To find x mod 3, we substitute the given expression x = 9a - 7 into the equation:
x mod 3 = (9a - 7) mod 3.
To simplify the expression, we can use the properties of modular arithmetic.
First, we can rewrite 9a as (3 × 3a) and distribute the modulus operator:
(9a - 7) mod 3 = ((3 × 3a) - 7) mod 3.
Next, we can separate the modulus operation:
((3 × 3a) - 7) mod 3 = ((3 × 3a) mod 3 - 7 mod 3) mod 3.
Since 3 is congruent to 0 mod 3, the first term becomes 0:
((3 × 3a) mod 3 - 7 mod 3) mod 3 = (0 - 7 mod 3) mod 3.
The second term, 7 mod 3, can be simplified as the remainder when 7 is divided by 3, which is 1:
(0 - 7 mod 3) mod 3 = (0 - 1) mod 3 = -1 mod 3.
Finally, we can find the remainder when -1 is divided by 3, which is 2:
-1 mod 3 = 2.
Therefore, x mod 3 is equal to 2.
Learn more about modular arithmetic here:
https://brainly.com/question/30967977
#SPJ11
What is the area of this quadrilateral?
4 ft
3 ft
10 ft
10 ft
31
4 ft
Answer:
42
Step-by-step explanation:
Answer:
42 square feet
Step-by-step explanation:
add all of the square feet together, including the sides parallel that don't tell you how many inches. What I mean by parallel is the sides across from it.
Can you help me in this please No links or spams or bots or report
Answer:
Monday - 7 hr 30 mins
Wednesday - 9 hr 30 mins
Friday - 7 hr
Saturay - 5 hr 30 mins
---------------------------------------------------------------
If you earn $12.40 per hour, first you must find how many hours you worked total - in this case, 29 hr and 30 mins.
So you would be making $359.60 per week.
In 2015, Mrs. Jonos paid $630 in Medicare
taxes. This represents 1% of her salary. What
was Mrs. Jones's gross income in 2015?
1. What does PEMDAS stand for?
P:
E:
M:
D:
A:
S:
Answer:
P- arenthesis
E- xpontent
M- ultiplication
D- ivision
A- ddition
S- ubtraction
Answer:
Step-by-step explanation:
p=parentheses
e=exponents
m=multiplication
d=division
a=addition
s=subtraction
Ahh i hate math fr someone help
how do you solve this ?
Answer:
x = 37 mm
Step-by-step explanation:
using the Pythagorean theorem:
m² = 13² - 5² = 169 - 25 = 144
m = √144 = 12 mm
x² = 12² + 35² = 144 + 1225 = 1369
x = √1369 = 37 mm
Answer:
x=37.3
Step-by-step explanation:
Since we're looking for "x" we need to use "the Pythagorean theorem".
13mm will be our "A" and 35mm will be our "B" will "x" being the hypotenuse.
Since x is the hypotenuse, it needs to be a number greater than 13 and 35.
c=√(a² + b²)
Making it c=√(13² + 35²)
Making C=37.336 or 37.3
Therefore making, x=37.3
Problem 3. Reformulate the following LP by the big-M method (only the reformulation is required, no need to solve the LP).
max 2x1 + x2 + X3 x
s.t.
X2+x3≥5
X1 X2 ≥1
x1 + x2+3x3 ≤ 25
X1, X2, X3 0
The reformulated problem includes the original variables x₁, x₂, x₃, and the additional slack variables s₁, s₂, and s₃. The objective function and constraints remain the same, but the problem has been transformed into an equality form suitable for applying the big-M method or other linear programming techniques.
To reformulate the given linear programming problem using the big-M method, we introduce additional binary variables and big-M constants. The reformulated problem is as follows:
maximize 2x₁ + x₂ + x₃
subject to:
x₂ + x₃ + s₁ = 5
x₁ - x₂ + s₂ = 1
x₁ + x₂ + 3x₃ + s₃ = 25
x₁, x₂, x₃, s₁, s₂, s₃ ≥ 0
where s₁, s₂, and s₃ are slack variables, and we choose a large positive constant M to represent infinity.
Introducing slack variable s₁ for the inequality constraint x₂ + x₃ ≥ 5:
We add s₁ to the left-hand side of the inequality to transform it into an equation: x₂ + x₃ + s₁ = 5.
Introducing slack variable s₂ for the inequality constraint x₁ - x₂ ≥ 1:
We subtract s₂ from both sides of the inequality to transform it into an equation: x₁ - x₂ + s₂ = 1.
Introducing slack variable s₃ for the inequality constraint x₁ + x₂ + 3x₃ ≤ 25: We subtract s₃ from the left-hand side of the inequality to transform it into an equation: x₁ + x₂ + 3x₃ + s₃ = 25.
Since all variables in the original problem are non-negative (x₁, x₂, x₃ ≥ 0), we explicitly state this in the reformulation.
Therefore, the reformulated problem includes the original variables x₁, x₂, x₃, and the additional slack variables s₁, s₂, and s₃. The objective function and constraints remain the same, but the problem has been transformed into an equality form suitable for applying the big-M method or other linear programming techniques.
To know more about inequality check the below link:
https://brainly.com/question/25275758
#SPJ4
Incomplete question:
Reformulate the following LP by the big-M method (only the reformulation is required, no need to solve the LP).
maxₓ 2x₁ + x₂ + x₃
s.t.
x₂+x₃ ≥ 5
x₁ - x₂ ≥ 1
x₁ + x₂+ 3x₃ ≤ 25
x₁, x₂, x₃ ≥0
Find (f+g)(x).
f(x) = 1
-
x
g(x) = x^2 + 2x-5
Answer:
(f + g)(x) = x² + x - 4
General Formulas and Concepts:
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightAlgebra I
Terms/CoefficientsFunctionsFunction NotationStep-by-step explanation:
Step 1: Define
f(x) = 1 - x
g(x) = x² + 2x - 5
(f + g)(x) is f(x) + g(x)
Step 2: Solve
Substitute in functions: (f + g)(x) = (1 - x) + (x² + 2x - 5)Combine like terms (x): (f + g)(x) = x² + x - 5 + 1Combine like terms: (f + g)(x) = x² + x - 4which dashed line is an asymptote for the graph?
Answer:
the graph has two vertical asymptotes, line q intersects the line at -8 and is the more important one.
Step-by-step explanation:
This is visible based off of the picture.
Consider a branching process whose offspring generating function is o(s) = (1/6) + (5/6)s2. Obtain the probability of ultimate extinction. Enter your answer as an integer of the form m or a fraction of the form m/n. Do not include spaces. Consider a branching process whose offspring generating function is o(s) = (5/6) + (1/6)s?. Obtain the mean time to extinction. Write your answer to two decimal places. Do not include spaces. Use the Excel spreadsheet "Mean Time to Extinction" in the Resources section of the unit Moodle page to help you with the calculation.
Probability of ultimate extinction: To get the probability of ultimate extinction in a branching process, we need to calculate the value of o(q) = q where q is the probability of ultimate extinction.
Now, o(s) = (1/6) + (5/6)s²
Therefore, for the probability of ultimate extinction,
o(q) = q = (1/6) + (5/6)q²=> 6q² - 5q + 1 = 0
On solving the quadratic equation,
we get q = 1 or q = 1/6.
Thus, the probability of ultimate extinction is 1/6. Mean time to extinction:
To calculate the mean time to extinction, we can use the formula, E(T) = (1/o'(1))
where o'(1) is the first derivative of the generating function o(s) evaluated at s = 1.
Now, o(s) = (5/6) + (1/6)s=> o'(s) = (1/6)
On substituting s = 1, o'(1) = (1/6).
Thus, E(T) = (1/o'(1))= (1/ (1/6))= 6
The mean time to extinction is 6.
To know more about Probability refer to:
https://brainly.com/question/25839839
#SPJ11
Suppose that the NY state total population remains relatively fixed 20Mil, with 8.4Mil of the people living in the city and remaining are in the suburbs. Each year 3.5% of the people living in the city move to the suburbs, and 1.7% of the suburban population moves to the city. What is the long-term distribution of population, after 100 years (what is the population in the city and in the suburbs)? Plot population of city and suburbs over period of 100 years. Submit, 1) answer(s), 2) Matlab code, 3) graph(s)
After 100 years, the long-term distribution of population in the city and suburbs of New York state can be calculated based on the given migration rates. The population in the city and suburbs will stabilize at approximately 3.96 million and 16.04 million, respectively. The population distribution can be visualized using a graph that shows the population of the city and suburbs over the 100-year period.
To calculate the long-term population distribution, we can use the concept of equilibrium. Let C represent the population in the city and S represent the population in the suburbs. The equilibrium equations can be written as follows:
C = C - 0.035C + 0.017S
S = S + 0.035C - 0.017S
Simplifying these equations, we have:
C = 0.965C + 0.017S
S = 0.035C + 0.983S
Solving these equations simultaneously, we find that C stabilizes at approximately 3.96 million and S stabilizes at approximately 16.04 million.
To plot the population of the city and suburbs over the 100-year period, you can use the following MATLAB code:
Copy code
years = 0:100;
C = zeros(1, 101);
S = zeros(1, 101);
C(1) = 8.4;
S(1) = 20 - C(1);
for i = 2:101
C(i) = 0.965*C(i-1) + 0.017*S(i-1);
S(i) = 0.035*C(i-1) + 0.983*S(i-1);
end
plot(years, C, 'b', 'LineWidth', 2);
hold on;
plot(years, S, 'r', 'LineWidth', 2);
xlabel('Years');
ylabel('Population');
legend('City', 'Suburbs');
title('Population of City and Suburbs Over 100 Years');
This MATLAB code calculates and plots the population of the city (in blue) and suburbs (in red) over the 100-year period.
Learn more about population distribution here:
https://brainly.com/question/31646256
#SPJ11
Question 3
1 pts
meters, will the period of a pendulum be 3 seconds? Use the formulas T = a[.where the proportionality constant,
The acceleration of gravity on Mars is 3.69 For what length
2 TT
a. depends on the acceleration of gravity: a =
vg
0.92 meters
0.84 meters
0.66 meters
On January 1, 2020, SugarBear Company acquired equipment costing $150,000, which will be depreciated on the assumption that the equipment will be useful for five years and have a residual value of $12,000. The estimated output from this equipment is as follows: 2020-15.000 unit; 2021-24,000 units; 2022-30,000 units: 2023-28,000 units: 2024-18,000 units. The company is now considering possible methods of depreciation for this asset.
Required
Calculate what the depreciation expense would be for each year of the asser's life, if the company chooser
The straight-line method 1. The units-of-production method
li. The double-diminishing-balance atlad
D. Bnefly discuss the criteria that a company sad ce seer when selecting a depreciation method.
When the total number of units produced over the five-year period is 125,000 units, the depreciation will be $1.20 pee unit.
How to calculate the valueThe total number of units produced over the five-year period is 125,000 units. Therefore, the depreciation expense for each year would be calculated as follows:
Depreciation expense = (Cost of asset - Residual value) / Total number of units produced
Depreciation expense = ($150,000 - $12,000) / 125,000 units
Depreciation expense = $1.20 per unit
There are several factors that a company should consider when selecting a depreciation method. These factors include:
The type of asset being depreciated.The useful life of the asset.The expected pattern of depreciation.The tax implications of the different methods.The type of asset being depreciated is an important factor to consider because different assets have different useful lives and expected patterns of depreciation. For example, a machine that is expected to be used for five years would be depreciated using a different method than a building that is expected to be used for 30 years.
Learn more about depreciation on
https://brainly.com/question/1203926
#SPJ4
PLEASE HELPP!!!!
The wingspan of a hawk is the distance from the end of one spread-out wing to the end of the other spread-out wing. A scientist measured the wingspans of a random sample of hawks at a national park. Based on the median wingspan of the sample, the scientist estimates that the median wingspan of all hawks in the national park is 40 inches. Which graph most likely represents the data from the scientist's sample?
Answer:
D)
Step-by-step explanation:
It looks like the most sense
A submarine was situated 475 feet below sea level. if it ascends 150 feet, what is its new position relative to the sea level?
Answer:
325 feet below sea level i believe
Step-by-step explanation:
Nahla Burtoni is buying her first home for $125,000. She has been granted
a mortgage loan at an annual interest rate of 8.5% for 20 years with a
$25,000 down payment. Closing costs are 2% of the amount of the
mortgage loan and will be financed as part of the mortgage. What is the
actual amount financed with the mortgage?
O $100,000
O $102,000
O $120,000
O $125,000
Answer: the answer is B!!!!!!!!!!!!!!
Step-by-step explanation:
Good art is art that allows you to enter it from a variety of angles and to
emerge with a variety of views."" what is you insights about this quotes?
Answer:
Step-by-step explanation:
My insight on this quote is that a good piece of art can tell various stories. Maybe there are various characters in the art and each on shows different actions and emotions. Or maybe the art is abstract and the emotions that it triggers in a person can tell a story all on its own. In a way these various angles are the different ways that the art makes us feels that allows us to view it in such a way. Yet these views can change if we look at the art in a different perspective.
What is the diameter of a satellite dish with a circumference of 957.7?
Answer:
The diameter would be 305 m
Step-by-step explanation:
Answer:
305 assuming your using 3.14 for pi
Step-by-step explanation:
PLEASE HELP FAST NEED IT FAST =)
Which pair of triangles demonstrates congruence with the AAS Postulate?
Answer:
B
Step-by-step explanation:
Answer:
A
Step-by-step explanation:
brainliest?
Tell whether the angles are complementary or supplementary. Then find the value of x.
Answer: Complementary x=15
Step-by-step explanation:
Complementary angles add up to 90°, supplementary angles add up to 180°.
We know they add up to 90 so...
3x+45=90
3x=45
x=15
Let Y_1.... Y_n be a random sample from a distribution with the density function
f_θ(y) = 3θ^3/y^4 y≥θ≥0
Is there a UMP test at level a for testing H_o: θ ≤ θ_o vs. H_1 : θ> θ_o? If so, what is the test?
Yes, there is a uniformly most powerful (UMP) test at level a for testing for the given density function.
The test is based on the likelihood ratio, where the critical region is (θ_o, ∞) and the test statistic is (nθ_o^3)/Y(n), where Y(n) is the largest observation in the sample.
To obtain the UMP test at level a for testing H_0: θ ≤ θ_o vs. H_1: θ > θ_o, we need to find the likelihood ratio test with the largest power for all possible alternatives. The likelihood ratio test is constructed as the ratio of the likelihood function under H_0 to the likelihood function under H_1. By algebraic manipulation, we obtain the likelihood ratio test statistic as (nθ_o^3)/Y(n), where Y(n) is the largest observation in the sample.
Under H_0, this test statistic has a chi-squared distribution with one degree of freedom. Therefore, the critical region for rejecting H_0 at level a is the right tail of the chi-squared distribution with one degree of freedom, which is (θ_o, ∞).
This test is UMP because it has the highest power for all possible alternatives. This is because the distribution of Y(n) is stochastically increasing in θ, which means that for a given sample size n, the probability of obtaining an observation larger than a threshold value increases as θ increases.
Therefore, the likelihood ratio test statistic decreases as θ increases, which means that the rejection region (θ_o, ∞) has the highest power for all possible alternatives. Hence, the test based on the likelihood ratio is the UMP test at level a for testing H_0: θ ≤ θ_o vs. H_1: θ > θ_o for the given density function
To learn more about random sample click brainly.com/question/30759604
#SPJ11
A student in your class mentally calculates 8+9 by noting that 8 is "1 less than 9", and, since 2 x 9 = 18, then 8 + 9 must be "1 less than 18," or 17. The equations representing this method are as follows: 1.8+9 (9-1) +9 ii. (9-1)+9=9+(9-1) iii. 9+ (9-1) (9+9)-1 iv. (9+9)-1-18-1 V. 18-1 17 Which properties of addition is the student implicitly using?
The student is implicitly using the commutative property and the associative property of addition.
i. (9-1) + 9: The student uses the commutative property, which states that the order of adding numbers does not affect the sum. They rearrange the terms to (9-1) + 9, recognizing that adding 9 after subtracting 1 is the same as adding 9 before subtracting 1.
ii. (9-1) + 9 = 9 + (9-1): Here, the student demonstrates the associative property. The associative property states that the grouping of numbers being added does not affect the sum. They regroup the terms to show that adding (9-1) first and then adding 9 is equivalent to adding 9 first and then subtracting 1.
iii. 9 + (9-1): The student does not explicitly demonstrate a property here. They simply perform the calculation of adding 9 and (9-1), recognizing that 9 minus 1 is 8.
iv. (9+9)-1-18-1: In this step, the student performs the subtraction calculations but does not demonstrate any particular property.
v. 18-1: Finally, the student calculates the subtraction and arrives at the answer 17.
So, the student implicitly uses the commutative property and the associative property of addition in their mental calculation.
Each sample of water has a 10% chance of containing a particular organic pollutant. Assume that the samples are independent with regard to the presence of the pollutant. Find the probability that in the next 18 samples, exactly 2 contains the pollutant.
(a) P(x≥≥4)
(b) P(x≤≤4).
(c) P(3≤≤x≤≤7)
The probability that in the next 18 samples, exactly 2 contain the pollutant is
P(x = 2) =[tex]C(18, 2) (0.1)^2 (0.9)^16[/tex]
= 0.252.
The given is Each sample of water has a 10% chance of containing a particular organic pollutant.
Assume that the samples are independent with regard to the presence of the pollutant.
We need to find the probability that in the next 18 samples, exactly 2 contain the pollutant.
We can use the Binomial distribution formula to solve this problem.
The binomial distribution formula is given by:
P(x) = [tex]C(n, x) px qn-x[/tex]
Where n is the number of trials, x is the number of successes, p is the probability of success, and q is the probability of failure.
Since there is a 10% chance of containing a particular organic pollutant, the probability of success is:
p = 0.1
The probability of failure is:
q = 1 - p
= 1 - 0.1
= 0.9
Number of trials (samples) is n = 18
(a) To find P(x≥≥4)
We need to find the probability that 2 or more samples contain the pollutant.
We can do this by subtracting the probability that less than 2 samples contain the pollutant from 1.
P(x ≥ 2) = 1 - P(x < 2)P(x < 2)
= P(x = 0) + P(x = 1)P(x = 0)
= C(18, 0) (0.1)0 (0.9)18
= [tex]0.9^18[/tex]
P(x = 1) = [tex]C(18, 1) (0.1)^1 (0.9)^17[/tex]
= 0.33
P(x < 2) = [tex]0.9^18[/tex]+ 0.33
= 0.335
P(x ≥ 2) = 1 - 0.335
= 0.665
(b) To find P(x≤≤4)
We need to find the probability that 4 or less samples contain the pollutant.
P(x ≤ 4) = P(x = 0) + P(x = 1) + P(x = 2) + P(x = 3) + P(x = 4)P(x = 0)
= C(18, 0) (0.1)0 (0.9)18
= [tex]0.9^18[/tex]
P(x = 1) = [tex]C(18, 1) (0.1)^1 (0.9)^17[/tex]
= 0.33
P(x = 2) = [tex]C(18, 2) (0.1)^2 (0.9)^16[/tex]
= 0.053
P(x = 3) = [tex]C(18, 3) (0.1)^3 (0.9)^15[/tex]
= 0.0047
P(x = 4) =[tex]C(18, 4) (0.1)^4 (0.9)^14[/tex]
= 0.0003
P(x ≤ 4) = 0.9^18 + 0.33 + 0.053 + 0.0047 + 0.0003
= 0.288
(d) To find P(3≤≤x≤≤7)
We need to find the probability that between 3 and 7 (inclusive) samples contain the pollutant.
P(3 ≤ x ≤ 7) = P(x = 3) + P(x = 4) + P(x = 5) + P(x = 6) + P(x = 7)P(x = 3)
= [tex]C(18, 3) (0.1)^3 (0.9)^15[/tex]
= 0.0047
P(x = 4) = C(18, 4) (0.1)^4 (0.9)^14
= 0.0003
P(x = 5) = [tex]C(18, 5) (0.1)^5 (0.9)^13[/tex]
= 0.00001
P(x = 6) = [tex]C(18, 6) (0.1)^6 (0.9)^12[/tex]
= 2.15e-07
P(x = 7) = [tex]C(18, 7) (0.1)^7 (0.9)^11[/tex]
= 4.7e-10
P(3 ≤ x ≤ 7) = 0.0047 + 0.0003 + 0.00001 + 2.15e-07 + 4.7e-10
= 0.00471
To know more about probability visit:
https://brainly.com/question/13604758
#SPJ11
Can someone help me with this. Thank you.
Answer:
All are true
Step-by-step explanation:
2) True
3) True
4) True
What number is equal to (1/6)^4?
Answer:
1/5
Step-by-step explanation:
i searched it up yikessssssss
The value of the given term is 1296.
What is a fraction?A fraction consisting of a quotient and remainder is a mixed fraction. we can convert the mixed fraction to improper fraction by first dividing the numerator by denominator and then taking the quotient as whole number and remainder as the numerator of proper fraction keeping the denominator same.
We are given the number as [tex]\dfrac{1}{6} ^{-4}[/tex]
Here we can see that the power is negative so we can just reciprocal the term.
Then we get;
6^4
this means 6 x6x6x6 = 1296
The correct value is 1296.
Learn more about fraction;
https://brainly.com/question/729654
#SPJ2
CAN SOMEONE IN THIS APP HELP PLEASE
Answer:
15 feet
Step-by-step explanation:
The distance from the foot of the ladder to the person is 6 feet. The person is also 6 feet. Therefore that mini triangle's length and width are both 6 feet.
The distance from the foot of the ladder to the wall is 15 feet. This is now a simple ratio. The length of the mini triangle is 6 to length of the larger triangle, 15. The height ratio is the mini triangle is 6 to the bigger triangle, x.
The height of the bigger triangle is the height of the wall. (Since the two are similar, then we can automatically deduce the height is 15.) But if you wanted to work out the ratio above ^^ you would multiply the 6 diagnol to the 15 and then divide by the last 6 to get 15.
6,6 and 7 units down and 5 units left where is t'
Answer:
it's 1,-1
Step-by-step explanation:
hoped I helped. I'm good at these.
Find the smallest sample size needed to estimate the percentage of Americans who prefer to watch the news rather than read or listen to it. Use a 0.03 margin of error and a confidence level of 99%. From a previous poll, it was found that 47% of the American respondents prefer to watch the news rather than read or listen to it.
To estimate the percentage of Americans who prefer to watch the news rather than read or listen to it with a 0.03 margin of error and 99% confidence level, the smallest sample size needed is 1,060.
To calculate the sample size, we can use the formula:
n = (Z² * p * (1 - p)) / E²
where:
n = sample size
Z = Z-score corresponding to the desired confidence level (in this case, for a 99% confidence level, Z ≈ 2.576)
p = estimated proportion of the population with the characteristic of interest (based on the previous poll, p = 0.47)
E = margin of error (E = 0.03)
Substituting the values into the formula, we have:
n = (2.576² * 0.47 * (1 - 0.47)) / 0.03²
n ≈ 1060
Therefore, the smallest sample size needed to estimate the percentage of Americans who prefer to watch the news rather than read or listen to it, with a 0.03 margin of error and 99% confidence level, is approximately 1,060. This means that a sample of at least 1,060 individuals should be surveyed to obtain reliable estimates with the desired level of confidence.
Learn more about sample here:
brainly.com/question/30100088
#SPJ11