The triangle below is equilateral. Find the length of side x to the nearest tenth.

It would take Deshaun 5 hours to drive 335 miles at the same rate.

The SI unit of speed is m/s, and speed is defined as the ratio of distance to time. It is the shift in an object's location with regard to time.

We can use the formula:

rate = distance / time

to solve the problem. The rate is constant, so we can use it to find the time for a different distance.

First, we find Deshaun's rate:

rate = distance / time = 469 miles / 7 hours = 67 miles per hour

Now we can use this rate to find the time it would take to drive 335 miles:

time = distance / rate = 335 miles / 67 miles per hour

time = 5 hours

Therefore, it would take Deshaun 5 hours to drive 335 miles at the same rate.

Learn more about speed on:

https://brainly.com/question/13262646

#SPJ9

The complete question is:

Deshaun drove 469 miles in 7 hours. At the same rate, how long would it take him to drive 335 miles?

First, let's recall that two matrices A and B are considered similar if there exists an invertible matrix P such that A = PBP⁻¹.

Now, let's use this definition to prove both parts of the question:
(a) We want to show that A − λI and B − λI are similar. To do this, we need to find an invertible matrix P such that (A − λI) = P(B − λI)P⁻¹.

Let's start by manipulating the equation A = PBP⁻¹ to get A − λI = P(B − λI)P⁻¹.
Now, let's substitute this into the equation we want to prove:
A − λI = P(B − λI)P⁻¹

We want to show that this is equivalent to:
A − λI = Q(B − λI)Q⁻¹
for some invertible matrix Q.

To do this, let's try to manipulate the equation we have into the form we want:

A − λI = P(B − λI)P⁻¹
A − λI = PBP⁻¹ − λP(P⁻¹)
A − λI = PBP⁻¹ − λI
A = PB(P⁻¹) + λI

Now, let's try to get this into the form we want:

A = Q(B − λI)Q⁻¹
A = QBQ⁻¹ − λQ(Q⁻¹)
A = QBQ⁻¹ − λI
A = QB(Q⁻¹) + λI

Comparing the two equations, we see that if we let Q = P, we get the equation we want:

A − λI = PBP⁻¹ − λI
A − λI = QBQ⁻¹ − λI
Thus, A − λI and B − λI are similar.

(b) We want to show that det(A − λI) = det(B − λI).
From part (a), we know that A − λI and B − λI are similar, so there exists an invertible matrix P such that A − λI = P(B − λI)P⁻¹.
Now, let's take the determinant of both sides:
det(A − λI) = det(P(B − λI)P⁻¹)
det(A − λI) = det(P)det(B − λI)det(P⁻¹)
det(A − λI) = det(B − λI)
since det(P) and det(P⁻¹) cancel out.

Therefore, det(A − λI) = det(B − λI).

To learn more about “matrices” refer to the https://brainly.com/question/11989522

#SPJ11

a. The probability of P(Z > 1.02) = 0.1539
b. P(Z ≤ -2.36) = 0.0091
c. P(0 ≤ Z ≤ 1.07) = 0.3577


1. To find the probabilities, you need to reference a standard normal (z) table.

2. For a. P(Z > 1.02), look up 1.02 on the z table. The corresponding value is 0.8461. Since the question asks for P(Z > 1.02), subtract the value from 1: 1 - 0.8461 = 0.1539.

3. For b. P(Z ≤ -2.36), look up -2.36 on the z table. The corresponding value is 0.0091. Since the question asks for P(Z ≤ -2.36), the value is already correct: 0.0091.

4. For c. P(0 ≤ Z ≤ 1.07), look up 1.07 on the z table. The corresponding value is 0.8577. Since the question asks for P(0 ≤ Z ≤ 1.07), subtract 0.5 (value for Z = 0): 0.8577 - 0.5 = 0.3577.

To know more about z table click on below link:

https://brainly.com/question/30765367#

#SPJ11

b. True

In an independent-measures t-test, if the sample variances are very large, it is possible to obtain a significant difference between treatments even if the actual mean difference is very small. This is because a larger variance can lead to a larger t-value, which can be considered statistically significant.

FOR MORE INFORMATION ON variances SEE:

https://brainly.com/question/14116780

#SPJ11

answer: $650

To find how much Kendra paid per foot, we can divide the total cost of the fencing by the length of the fencing.

The length of the fencing is given as 50 feet.

The total cost of the fencing can be found by multiplying the cost per foot by the length of the fencing:

Total cost = Cost per foot x Length of fencing Total cost = $13/ft x 50 ft Total cost = $650

Therefore, Kendra paid a total of $650 for 50 feet of fencing. To find how much she paid per foot, we can divide the total cost by the length of the fencing:

Cost per foot = Total cost / Length of fencing Cost per foot = $650 / 50 ft Cost per foot = $13/ft

So Kendra paid $13 per foot of fencing.

The probability of at least one cloudy day in a five-day span is 0.7627 or approximately 0.76.

The probability of a sunny day in Virginia in July is 0.75, which means the probability of a cloudy day is 1 - 0.75 = 0.25.

Assuming the days are independent, the probability of at least one cloudy day in a five-day span can be calculated using the complement rule:

P(at least one cloudy day) = 1 - P(no cloudy days)

The probability of no cloudy days in a five-day span is the probability that all five days are sunny, which is [tex](0.75)^5[/tex] = 0.2373.

Therefore, the probability of at least one cloudy day in a five-day span is:

P(at least one cloudy day) = 1 - P(no cloudy days) = 1 - 0.2373 = 0.7627

So the probability of at least one cloudy day in a five-day span is 0.7627 or approximately 0.76.

Learn more about probability

brainly.com/question/29381779

#SPJ11

The probability of getting a result as extreme or more extreme than 8 heads is 0.0547, which corresponds to answer choice (a).

The probability of getting a result as extreme or more extreme than 8 heads in one flip of 10 unbiased coins can be found using the binomial probability formula. We need to calculate the probability of getting exactly 8 heads, 9 heads, and 10 heads, then sum them up.

The binomial probability formula is: P(X=k) = C(n, k) × p^k × (1-p)^(n-k), where C(n, k) represents the number of combinations, n is the number of trials (in this case, 10 coin flips), k is the number of successful outcomes (heads), and p is the probability of success (0.5 for unbiased coins).

P(8 heads) = C(10, 8) × 0.5⁸ × 0.5² = 45 × 0.0039 × 0.25 = 0.0439
P(9 heads) = C(10, 9) × 0.5⁹ × 0.5¹ = 10 × 0.00195 × 0.5 = 0.0098
P(10 heads) = C(10, 10) × 0.5¹⁰ × 0.5⁰ = 1 × 0.00098 × 1 = 0.00098

Now, add these probabilities together: 0.0439 + 0.0098 + 0.00098 = 0.0547.

Therefore, the probability of getting a result as extreme or more extreme than 8 heads is 0.0547, which corresponds to answer choice (a).

To learn more about probability here:

brainly.com/question/30034780#

#SPJ11

The area of the first quadrant bounded by the curve and both coordinate axes is 2/3 ([tex]5^{(3/2)}[/tex] - 5).

The given curve is y² = 5 - x, which is a parabola opening towards the left with a vertex at (5,0).

To find the area of the first quadrant bounded by the curve and both coordinate axes, we need to integrate the curve with respect to x over the range [0,5].

Since the curve is given in terms of y², we can rewrite it as y = ±√(5-x). However, we only need the positive root for the first quadrant, so we have y = √(5-x).

Thus, the area can be calculated as:

A = ∫[0,5] y dx

= ∫[0,5] √(5-x) dx

= 2/3 ([tex]5^{(3/2)}[/tex] - 5)

Learn more about the bounded area at

https://brainly.com/question/26315835

#SPJ4

The surface area of the composite figure is 1,665.04 in².

The volume of composite figure is 1,079.66 in³.

The volume  and surface area of the composite figure is calculated by applying the following formula as shown below;

The surface area = area of cone + area of hemisphere

S.A = πr(r + l) + 3πr²

S.A = π x 10 (10 + 13)  +  3π(10²)

S.A = 1,665.04 in²

The volume of composite figure is calculated as follows;

V = ¹/₃πr²h  +  ²/₃πr²

The height of the cone is calculated;

h = √(13² - 10²)

h = 8.31 in

V = ¹/₃π(10)²(8.31)  +  ²/₃π(10)²

V = 870.22 + 209.44

V = 1,079.66 in³

Learn more about volume of cone here: https://brainly.com/question/13677400

#SPJ1

The statement "The area below the price and above the supply curve measures the producer surplus in a market" is a. TRUE.

Producer surplus is represented by this area, as it shows the difference between the market price and the minimum price a producer is willing to accept for a good or service.

The area below the price and above the supply curve represents the amount that producers are willing to sell their goods for (supply curve) and the price that they actually receive (market price).

The difference between these two amounts is the producer surplus, which is the measure of the benefit that producers receive from participating in a market.

Visit here to learn more about Supply Curve:

brainly.com/question/11717727

#SPJ11

Answer:

To find the dependent value for the graph y = 20 - 2x when the independent value is 5, we substitute x = 5 into the equation and solve for y.

y = 20 - 2x

y = 20 - 2(5)

y = 20 - 10

y = 10

Therefore, when x = 5, the dependent value y is 10.

Answer:

To find the dependent value (y) for the given graph y = 20 - 2x when the independent value (x) is 5, we substitute x = 5 into the equation and solve for y.

y = 20 - 2x

Substituting x = 5:

y = 20 - 2(5)

y = 20 - 10

y = 10

So, when x = 5, the dependent value (y) is 10.

Answer:

Step-by-step explanation:

use Pythagorean triangle:

a^{2} + b^{2} = c^{2}

a= 12

b= 16

c = ?

12^{2} + 16^{2} = c^{2}

144 + 256 = c^{2}

400 = c^{2}

\sqrt{400} = c

20 = c

c = 20 ft

On quantities:

3 boxes.

10 devices.

28 phalange bones.

15 grams of fat.

2 smoothies left.

1256 oz of water.

2.5 miles.

7. The physician assistant sees an average of 37 x 3 = 111 patients over 3 days.

Since each patient requires 2 gloves, the total number of gloves needed is 111 x 2 = 222 gloves.

Since there are 100 gloves in each box, the number of boxes needed is 222/100 = 2.22, which rounds up to 3 boxes.

8. The medical sales rep sells 17 devices per day on average. To sell 500 devices in November, the sales rep needs to sell 500/30 = 16.67 devices per day on average.

The sales rep exceeds the goal by 17 - 16.67 = 0.33 devices per day on average.

Therefore, the sales rep exceeds the goal by 0.33 x 30 = 10 devices.

9. There are 56 - (14 x 2) = 28 phalange bones in each foot.

10. Frank consumed 41 grams of fat for lunch, so he has 56 - 41 = 15 grams of fat left to consume.

11. The rec center sells an average of 12 smoothies per day, so in 4 days, it will sell 12 x 4 = 48 smoothies.

Since there are 50 smoothies in each case, there will be 50 - 48 = 2 smoothies left in stock after 4 days.

12. Ashton drank 24 oz of water, so he needs to drink an additional 64 - 24 = 40 oz of water.

Since 1 oz = 0.03125 cups, Ashton needs to drink 40/0.03125 = 1280 cups of water.

Therefore, Ashton needs to drink 1280 - 24 = 1256 oz of water for the rest of the day.

13. Kathy walks 3 times a week for a total of 3 x 2.5 = 7.5 miles.

To meet her goal of 10 miles per week, Kathy needs to walk an additional 10 - 7.5 = 2.5 miles.

Find out more on quantity here: https://brainly.com/question/1692392

#SPJ1

The alpha level for a hypothesis test is a value that defines the concept of "significance level" or "level of significance".

The significance level, denoted as α, represents the threshold at which the null hypothesis is rejected in favor of the alternative hypothesis. It is a predetermined value chosen by the researcher to determine the level of confidence required to reject the null hypothesis.

The critical region, also known as the rejection region, consists of the extreme or unlikely values of the test statistic that would lead to the rejection of the null hypothesis.

These values are determined based on the chosen alpha level. If the calculated test statistic falls within the critical region, the null hypothesis is rejected in favor of the alternative hypothesis.

The critical region is defined by the alpha level, and it represents the probability of observing extreme test statistics under the assumption that the null hypothesis is true.

In other words, it defines the values of the test statistic that would be considered statistically significant, and that would lead to the rejection of the null hypothesis if observed.

The specific values that define the critical region are determined by the nature of the hypothesis test and the type of test being conducted, such as one-tailed or two-tailed test.

Learn more about Statistics

brainly.com/question/29093686

#SPJ11

a)  If the first person chosen is a boy, what is the probability that

the second person chosen is also a boy is: 12/27

b) The probability that both students chosen are girls is: 5/18

The parameters given are:

There are 28 students in a class

13 of the students are boys

According to the question we have

When first chosen a boy , then the rest is

28 - 1 = 27

Then the rest boys are 12

From 27, has 12 boys

The probability that the second person also is a boy = 12/27

b) There are:

28 - 13 = 15 girls

Probability that first is a girl = 15/28

Probability that second is a girl = 14/27

Thus:

P(both are girls) = (15/28) * (14/27) = 5/18

Read more about Probability of selection at: https://brainly.com/question/251701

#SPJ1

The equation to compute the area A of the circle is: [tex]A = π(r^2 - r0^2) + A0[/tex] where r0 is the initial radius and A0 is the initial area.

The equation to compute the area A of a circle with radius r is [tex]A = πr^2[/tex].

Using this equation and the given information that the radius is increasing at a rate of centimeters per second, we can write:

[tex]\frac{dA}dt} = 2rπ \frac{dr}{dt}[/tex]

where dA/dt represents the rate of change of area with respect to time, and [tex]\frac{dr}{dt}[/tex] represents the rate of change of radius with respect to time.

Part 1:

If we want to find the area of the circle at a specific time t, we can integrate both sides of the equation with respect to time:

[tex]\int\limits dA= \int\limits 2πr \frac{dr}{dt}  \, dt[/tex]

Integrating both sides gives:

[tex]A = πr^2 + C[/tex]

where C is the constant of integration. Since we are given the initial radius, we can use it to find the value of C:

When t = 0, r = r0

[tex]A = πr0^2 + C[/tex]

Therefore, [tex]C = A - πr0^2[/tex]

Substituting this value of C back into the equation gives:

[tex]A = πr^2 + A - πr0^2[/tex]

Simplifying gives:

[tex]A =π(r^2 - r0^2) + A0[/tex]

where A0 is the initial area of the circle.

Therefore, the equation to compute the area A of the circle is:

[tex]A = π(r^2 - r0^2) + A0[/tex]

where r0 is the initial radius and A0 is the initial area.

To know more about "Area of cirlce" refer here:

https://brainly.com/question/6042268#

#SPJ11

The general solution of differential equation is, y = k * (x²-9).

We can begin by separating the variables of the differential equation:

y′ = (2y) / (x²-9)

y′ / y = 2 / (x²-9)

Now we can integrate both sides with respect to their respective variables:

[tex]\int \dfrac{y'}{y} dy = \int \dfrac{2}{x^2-9} dx[/tex]

ln|y| = ln|x²-9| + C

where C is the constant of integration.

Simplifying:

|y| = e^(ln|x²-9|+C) = e^C * |x²-9|

Since e^C is a positive constant, we can write:

y = k * (x²-9)

where k is a non-zero constant. Therefore, the general solution of the given differential equation is y = k(x²-9), where k is any non-zero constant.

To know more about differential equation, here

brainly.com/question/14620493

#SPJ4

--The complete question is, Find the general solution of the given differential equation. y′ = (2y) / (x²-9).--

If the inputs of a J-K flip-flop are J= 1 and K = 1 while the outputs are Q = 0 and Q= 1, the outputs after the next clock pulse occurs are C) Q=1, Q=0. An eight-line multiplexer must have D) eight data inputs and three select inputs.

For the first question, with the J-K flip-flop:
Given inputs J = 1 and K = 1, and outputs Q = 0 and Q' = 1. After the next clock pulse occurs, the outputs will be:
A) Q = 0, Q' = 0
B) Q = 1, Q' = 1
C) Q = 1, Q' = 0
D) Q = 0, Q' = 1
Answer: Since the J-K flip-flop is in toggle mode when J = 1 and K = 1, the outputs will toggle. Therefore, the correct answer is C) Q = 1, Q' = 0.
For the second question, regarding an eight-line multiplexer:
A) four data inputs and three select inputs.
B) eight data inputs and two select inputs.
C) eight data inputs and four select inputs.
D) eight data inputs and three select inputs.
Answer: An eight-line multiplexer requires three select inputs to choose from eight data inputs ([tex]2^3[/tex] = 8). Therefore, the correct answer is D) eight data inputs and three select inputs.

To learn more about multiplexer, refer:-

https://brainly.com/question/29609961

#SPJ11

The global maximum value of f(x, y) on the closed triangular region occurs at either (4, 0) or (0, 4), both of which have a value of 16.

The global minimum value of f(x, y) occurs at the critical point (0, 0), with a value of 0

To find the Optimization of multivariable functions i.e, global extreme values of [tex]f(x, y) = x^2 - xy + y^2[/tex] on the closed triangular region in the first quadrant bounded by the lines x = 4, y = 0, and y = x,

We need to first find the critical points of the function in the interior of the region and evaluate the function at these points, and then evaluate the function at the boundary points of the region.

To find the critical points of the function in the interior of the region, we need to solve the system of partial derivatives:

[tex]df/dx = 2x - y = 0\\f/dy = -x + 2y = 0[/tex]

Solving this system of equations, we get the critical point (x, y) = (0, 0).

To check whether this point is a maximum or a minimum, we need to evaluate the second partial derivatives of f:

[tex]d^2f/dx^2 = 2\\d^2f/dy^2 = 2\\d^2f/dxdy = -1[/tex]

The determinant of the Hessian matrix is:

[tex]d^2f/dx^2 \times d^2f/dy^2 - (d^2f/dxdy)^2 = 4 - 1 = 3[/tex]

Since this determinant is positive and [tex]d^2f/dx^2 = d^2f/dy^2 = 2[/tex] are both positive, the critical point (0, 0) is a local minimum.

Next, we need to evaluate the function at the boundary points of the region. These are:

(4, 0): f(4, 0) = 16

(0, 0): f(0, 0) = 0

(0, 4): f(0, 4) = 16

(y, y) for 0 ≤ y ≤ 4: [tex]f(y, y) = 2y^2 - y^2 = y^2[/tex]

Therefore, the global maximum value of f(x, y) on the closed triangular region occurs at either (4, 0) or (0, 4), both of which have a value of 16.

The global minimum value of f(x, y) occurs at the critical point (0, 0), with a value of 0.

Learn more about Optimization of multivariable functions

brainly.com/question/30216710

#SPJ11

Answer:

There are 16 girls.

Step-by-step explanation:

3 : 4

12 : x

Now if we cross multiply:

3(x) = 12(4)

3x = 48

x = 16

Boundary value analysis is a testing technique used to identify defects or issues at the boundaries or limits of input values. True, in boundary value analysis both valid and invalid inputs are tested to verify potential issues.

Boundary value analysis is a testing technique used to identify defects or issues at the boundaries or limits of input values. The main idea is to test inputs that are just above, just below, and exactly at the specified boundaries or limits. This helps in uncovering potential issues that may arise due to boundary conditions.

Valid inputs are those that fall within the acceptable range of values, while invalid inputs are those that fall outside the acceptable range of values. Both valid and invalid inputs are tested during boundary value analysis to ensure thorough testing of the system under test. By testing valid inputs, we can verify if the system handles inputs within the acceptable range correctly. By testing invalid inputs, we can identify any issues or defects that may arise when inputs fall outside the acceptable range.

Therefore, in boundary value analysis, both valid and invalid inputs are tested to verify potential issues or defects in the system

To learn more about Boundary value here:

brainly.com/question/30267084#

#SPJ11

The volume of the region that bounds e is 15/2.

To visualize the region bounded by the parabolic cylinder, planes, and the plane z = 4, we can plot the surfaces using a 3D graphing software or by hand.

The parabolic cylinder z - 1/2 y^2 is a cylinder that opens upwards along the z-axis and its cross-sections perpendicular to the z-axis are parabolas. The planes x = 0 and z = 0 bound the cylinder on the left and at the bottom, respectively. The plane x = 1 bounds the cylinder on the right, and the plane z = 4 bounds it from above.

The intersection of the parabolic cylinder and the plane z = 4 is a parabolic curve in the plane z = 4. The intersection of the parabolic cylinder and the plane x = 1 is a straight line segment that runs along the y-axis from y = -2 to y = 2. The intersection of the parabolic cylinder and the plane z = 0 is the x-y plane, which contains the bottom of the cylinder.

To find the region that bounds e, we need to find the points where the parabolic cylinder intersects the planes x = 0, x = 1, and z = 1, and then determine the region that lies between these curves.

The intersection of the parabolic cylinder and the plane x = 0 is the y-axis. Therefore, the left boundary of the region is y = -2 and the right boundary is y = 2.

The intersection of the parabolic cylinder and the plane x = 1 is a line segment along the y-axis from y = -2 to y = 2. Therefore, the region is bounded on the left by the y-axis and on the right by the line segment x = 1, y = z^2/2 + 1/2.

The intersection of the parabolic cylinder and the plane z = 1 is a parabolic curve in the plane z = 1. To find the equation of this curve, we substitute z = 1 into the equation of the parabolic cylinder:

1 - 1/2 y^2 = x

Solving for y^2, we get:

y^2 = 2 - 2x

Therefore, the equation of the parabolic curve in the plane z = 1 is:

y = ±sqrt(2 - 2x)

The region bounded by the parabolic cylinder, planes, and the plane z = 4 is

therefore the region is given by:

0 ≤ x ≤ 1
-y/2 + 1/2 ≤ z ≤ 4
-y ≤ x^2/2 - 1/2

To visualize this region in 3D, we can plot the parabolic cylinder and the planes x = 0, x = 1, and z = 1 and shade the region between them. Then, we can extend this region upwards to the plane z = 4 to obtain the full region that bounds e.

To find the volume of this region, we can integrate the function 1 over this region with respect to x, y, and z:

∫∫∫_R 1 dV

where R is the region defined by the inequalities above. However, this triple integral is difficult to evaluate directly, so we can use the fact that the region is symmetric about the y-axis to simplify the integral by integrating first with respect to y and then with respect to x and z:

V = 2∫∫∫_R 1 dV

where the factor of 2 accounts for the symmetry of the region. Integrating with respect to y first, we get:

V = 2∫_{-2}^{2} ∫_{y^2/2 - 1/2}^{1/2} ∫_{-y/2 + 1/2}^{4} 1 dz dx dy

Evaluating this integral, we get:

V = 15/2

Therefore, the volume of the region that bounds e is 15/2.

Visit to know more about Volume:-

brainly.com/question/463363

#SPJ11

a) The general solution is y(x) = y_c(x) + y_p(x) = c1e^x + c2e^(4x) + 8ex.

b) The general solution is y(x) = y_c(x) + y_p(x) = c1e^(x/2)cos((√3/2)x) + c2e^(x/2)sin((√3/2)x) - (1/4)sin(3x).

For the differential equation y'' - 5y' + 4y = 8ex, the characteristic equation is r^2 - 5r + 4 = 0, which has roots r1 = 1 and r2 = 4. Thus, the complementary function is y_c(x) = c1e^x + c2e^(4x).

To find the particular solution, we guess a solution of the form y_p(x) = Ae^x. Then, y_p''(x) - 5y_p'(x) + 4y_p(x) = Ae^x - 5Ae^x + 4Ae^x = Ae^x. We need this to equal 8ex, so we set A = 8, and the particular solution is y_p(x) = 8ex.

Thus, the general solution is y(x) = y_c(x) + y_p(x) = c1e^x + c2e^(4x) + 8ex.

b) For the differential equation y'' - y' + y = 2sin(3x), the characteristic equation is r^2 - r + 1 = 0, which has roots r1,2 = (1 ± i√3)/2. Thus, the complementary function is y_c(x) = c1e^(x/2)cos((√3/2)x) + c2e^(x/2)sin((√3/2)x).

To find the particular solution, we guess a solution of the form y_p(x) = A sin(3x) + B cos(3x). Then, y_p''(x) - y_p'(x) + y_p(x) = -9A sin(3x) - 9B cos(3x) - 3A cos(3x) + 3B sin(3x) + A sin(3x) + B cos(3x) = -8A sin(3x) - 6B cos(3x). We need this to equal 2sin(3x), so we set A = -1/4 and B = 0, and the particular solution is y_p(x) = (-1/4)sin(3x).

Thus, the general solution is y(x) = y_c(x) + y_p(x) = c1e^(x/2)cos((√3/2)x) + c2e^(x/2)sin((√3/2)x) - (1/4)sin(3x).

To know more about general solution refer here:

https://brainly.com/question/13594562

#SPJ11

cos(sin⁻¹ˣ-tan^-1y) can be written as: x/√(1+y²) + √(1-x²)/√(1+y²). This can be answered by the concept of Trigonometry.

We can use the trigonometric identity cos(a-b) = cos(a)cos(b) + sin(a)sin(b) to write cos(sin⁻¹ˣ-tan^-1y) in terms of x and y.

Let a = sin⁻¹ˣ and b = tan^-1y, then we have:

cos(sin⁻¹ˣ-tan^-1y) = cos(a-b)

= cos(a)cos(b) + sin(a)sin(b)

= (√(1-x²))(1/√(1+y²)) + x/√(1+y²)

= x/√(1+y²) + √(1-x²)/√(1+y²)

Therefore, cos(sin⁻¹ˣ-tan^-1y) can be written as:

x/√(1+y²) + √(1-x²)/√(1+y²)

To learn more about Trigonometry here:

brainly.com/question/29002217#

#SPJ11

Answer:

Using a scale factor of -1/2, you can enlarge the center with the axis points, (-1,-1).

Step-by-step explanation:

In order to enlarge the triangle M, you would need to use the scale factor of -1/2.

With the center of enlargement then found on plotted axis (-1, -1), one would find a new triangle labeled N.

Yes, {A0, A1, A2, A3} it is a partition of the set Z.

Yes, {A0, A1, A2, A3} is a partition of the set Z, which consists of all integers. To explain why this is a partition, let's consider the definition of a partition and examine each subset:

A partition of a set is a collection of non-empty, disjoint subsets that together contain all the elements of the original set. In this case, we need to show that A0, A1, A2, and A3 are non-empty, disjoint, and together contain all integers.

1. Non-empty: Each subset Ai (i=0,1,2,3) contains integers based on the value of k. For example, A0 contains all multiples of 4, A1 contains all numbers 1 more than a multiple of 4, and so on. Since there are integers that fit these criteria, each subset is non-empty.

2. Disjoint: The subsets are disjoint because each integer n can only belong to one subset. If n = 4k, it cannot also be 4k + 1, 4k + 2, or 4k + 3 for the same integer k. Similarly, if n = 4k + 1, it cannot also be 4k, 4k + 2, or 4k + 3, and so on for A2 and A3.

3. Contains all integers: Any integer n can be expressed as 4k, 4k + 1, 4k + 2, or 4k + 3 for some integer k. This covers all possible integers in Z. For example, if n is divisible by 4, it belongs to A0; if it has a remainder of 1 when divided by 4, it belongs to A1; and so on.

Therefore, since {A0, A1, A2, A3} satisfies all the conditions for a partition, it is a partition of the set Z.

Learn more about partition of a set

brainly.com/question/30249529

#SPJ11

96

Explanation:

Write the prime factorization of both the numbers.

24=2×2×2×3

32=2×2×2×2×2

Answer: the quotient is 2x - 1 and the remainder is 0. So we can write:

(56x^2-60x+16) ÷ (28x-16) = 2x - 1.

Step-by-step explanation:

2x - 1

-------------

28x - 16 | 56x^2 - 60x + 16

56x^2 - 32x

--------------

-28x + 16

-28x + 16

----------

0

The area of the region bounded by the curve r = 2sin(θ) in the sector 0≤θ≤π is π/2 square units.

The curve given by the polar equation r = 2sin(θ) is a sinusoidal spiral that starts at the origin, goes out to a maximum distance of 2 units, and then spirals back into the origin as θ increases from 0 to 2π. The sector 0≤θ≤π is half of this spiral, so we can find its area by integrating the area element dA = 1/2 r^2 dθ over this sector

A = ∫[0,π] 1/2 (2sin(θ))^2 dθ

Simplifying the integrand and applying the half-angle identity for sin^2(θ), we get

A = ∫[0,π] sin^2(θ) dθ

= ∫[0,π] (1 - cos^2(θ)) dθ

Integrating term by term, we get

A = [θ - 1/2 sin(2θ)]|[0,π]

= π/2 square units.

Learn more about area here

brainly.com/question/31402986

#SPJ4