We would expect interstellar molecular hydrogen to act more like a wave than a particle, When the wavelength is large compared to the size of the particles or their separation, they tend to exhibit wavelike behavior.
Based on the principle of wave-particle duality, the behavior of interstellar molecular hydrogen would depend on its wavelength, which is determined by its momentum. At such a low temperature, the particles would have very low kinetic energy and momentum, resulting in a longer wavelength.
The temperature in interstellar space is around 3 K, which is 100 times colder than room temperature. At such low temperatures, you would expect interstellar molecular hydrogen to act more like a wave. This is because, as the temperature decreases, the thermal de Broglie wavelength of the particles increases. When the wavelength is large compared to the size of the particles or their separation, they tend to exhibit wavelike behavior.
Therefore, we would expect interstellar molecular hydrogen to act more like a wave than a particle.
To know more about Wavelength refer here :
https://brainly.com/question/29548846
#SPJ11
We would expect interstellar molecular hydrogen to act more like a wave than a particle, When the wavelength is large compared to the size of the particles or their separation, they tend to exhibit wavelike behavior.
Based on the principle of wave-particle duality, the behavior of interstellar molecular hydrogen would depend on its wavelength, which is determined by its momentum. At such a low temperature, the particles would have very low kinetic energy and momentum, resulting in a longer wavelength.
The temperature in interstellar space is around 3 K, which is 100 times colder than room temperature. At such low temperatures, you would expect interstellar molecular hydrogen to act more like a wave. This is because, as the temperature decreases, the thermal de Broglie wavelength of the particles increases. When the wavelength is large compared to the size of the particles or their separation, they tend to exhibit wavelike behavior.
Therefore, we would expect interstellar molecular hydrogen to act more like a wave than a particle.
To know more about Wavelength refer here :
https://brainly.com/question/29548846
#SPJ11
when a solar flare erupts on the surface of the sun, how many minutes after it occurs does its light show up in an astronomer's telescope on earth?'
Answer:
When a solar flare erupts on the surface of the sun, the light it produces travels at the speed of light, which is about 299,792,458 meters per second. This means that the light from the solar flare takes approximately 8 minutes and 20 seconds to reach Earth, assuming there are no significant obstructions in its path. Therefore, an astronomer on Earth would typically see the light from a solar flare about 8 minutes and 20 seconds after it occurs on the surface of the sun.
When CHARGING a capacitor in a RC circuit, how does the current change with time? a) increases exponentially b) decreases exponentially c) stays constant d) decreases at a constant rate e) increases at a constant rate
Answer:
(b) the current must decrease exponentially with time.
The maximum current will flow when there is no voltage due to the capacitor - as the charge on the capacitor increases the back-voltage increases accordingly and the current in the circuit will decrease.
(a) Is a concave mirror a diverging element or a converging element? (b) Light is observed to converge to a point after being reflected from a plane mirror. Were the incident rays parallel, converging, or diverging prior to striking the mirror? Show a diagram to substantiate your conclusion.
(a) A concave mirror is a converging element.
(b) Light is observed to converge to a point after being reflected from a plane mirror. The incident rays were converging before striking the mirror.
(a) A concave mirror is a converging element. It has a curved surface that reflects light rays inward, causing them to converge at a single point known as the focal point. This makes concave mirrors useful for applications like focusing light or creating magnified images in telescopes and makeup mirrors.
(b) In the case of a plane mirror, when light rays converge to a point after being reflected, it indicates that the incident rays were converging before striking the mirror. This is because plane mirrors only change the direction of light rays without altering their paths relative to each other. If the incident rays were parallel or diverging, they would maintain their parallel or diverging nature after reflection.
Here is a simple diagram to illustrate this:
```
Incident rays: / \
/ \
Plane mirror: ------------
Reflected rays: \ /
\ /
```
In the diagram, the incident rays are converging before striking the plane mirror, and after reflection, they continue to converge to a point.
For more such questions on Concave mirror.
https://brainly.com/question/3359672#
#SPJ11
what should a firm’s goal be regarding the cash conversion cycle, holding other things constant? explain your answer.
A firm's goal regarding the cash conversion cycle, holding other things constant, should be to minimize the length of the cycle.
The cash conversion cycle is the time it takes for a firm to convert its inventory into cash, and then use that cash to pay off its liabilities. By reducing the length of the cycle, a firm can improve its cash flow and liquidity, which can help it to meet its financial obligations more easily. This can also allow the firm to invest more funds into growth opportunities, which can help to drive long-term success. Therefore, firms should aim to optimize their cash conversion cycle by managing inventory levels, reducing payment and collection times, and improving overall operational efficiency.
Learn more about cash conversion cycle here:
https://brainly.com/question/29857000
#SPJ11
a coil with a self-inductance of 2.0 h carries a current that varies with time according to i(t) = (2.0 a)sin120πt. find an expression for the emf induced in the coil.
The coil's induced emf is expressed as follows:
[tex]$emf = -480 \pi H \cos (120 \pi t)$[/tex]
Calculation-
The following formula determines the induced emf in a coil:[tex]$emf = -L \frac{di}{dt}$[/tex]
where L is the self-inductance of the coil, i is the current passing through the coil, and [tex]$\frac{di}{dt}$[/tex] is the rate of change of the current with respect to time.
Substituting the given values, we get:
[tex]$i(t) = (2.0 A) \sin (120 \pi t)$[/tex]
[tex]$\frac{di}{dt} = (2.0 A) \times (120 \pi) \cos (120 \pi t)$$emf = -L \frac{di}{dt} = -2.0 H \times (2.0 A) \times (120 \pi) \cos (120 \pi t)$[/tex]
Therefore, the expression for the emf induced in the coil is:
[tex]$emf = -480 \pi H \cos (120 \pi t)$[/tex]
to know more about self-inductance here:
brainly.com/question/28167218
#SPJ1
A highway curve with radius 1000 ft is to be banked so that a car traveling 56.0 mph will not skid sideways even in the absence of friction.At what angle should the curve be banked?
The curve should be banked at an angle of approximately 9.6 degrees.
When a car is traveling along a banked curve, there are two forces acting on it: the force of gravity (which pulls the car down) and the normal force (which pushes the car towards the center of the curve). If the curve is banked at the correct angle, these two forces will combine to provide the necessary centripetal force to keep the car moving in a circular path. The formula for the centripetal force is:F_c = m v^2 / r.where F_c is the centripetal force, m is the mass of the car, v is its velocity, and r is the radius of the curve.
In the absence of friction, the necessary centripetal force is provided entirely by the normal force, which is perpendicular to the surface of the road. The normal force can be resolved into two components: one perpendicular to the surface of the road (which balances the force of gravity) and one parallel to the surface of the road (which provides the necessary centripetal force).The angle of the curve, θ, is related to the velocity of the car and the radius of the curve by the equation: tan(θ) = v^2 / (g r)where g is the acceleration due to gravity.
Substituting the given values, we get: tan(θ) = (56 mph)^2 / (32.2 ft/s^2 * 1000 ft)tan(θ) = 0.168Taking the inverse tangent of both sides, we get:θ = tan^-1(0.168)θ = 9.6 degrees. Therefore, the curve should be banked at an angle of approximately 9.6 degrees.the curve should be banked at an angle of approximately 9.6 degrees.
Learn more about A highway curve here:https://brainly.com/question/30336003
#SPJ11
a convenient time unit for short time intervals is the millisecond. express 0.0309 s in milliseconds.
A convenient time unit for short time intervals is the millisecond. 0.0309 s in milliseconds is 30.9 milliseconds.
To express 0.0309 seconds in milliseconds, you can follow :
1. Identify the conversion factor between seconds and milliseconds:
1 second = 1000 milliseconds
2. Multiply the given time (0.0309 seconds) by the conversion factor (1000 milliseconds/1 second).
0.0309 seconds × (1000 milliseconds / 1 second)
= 30.9 milliseconds.
So, 0.0309 s in milliseconds is 30.9 milliseconds.
Learn more about time here:
https://brainly.com/question/479532
#SPJ11
a capacitor of 10.0 f and a resistor of 120 ω are quickly connected in series to a battery of 6.00 v. what is the charge on the capacitor 0.00100 s after the connection is made?
The charge on the capacitor 0.00100 s after the connection is made is approximately 49.3 μC.
To calculate the charge on the capacitor at a specific time, you can use the formula:
Q(t) = C * V * (1 - e^(-t / (R * C)))
where Q(t) is the charge at time t, C is the capacitance (10.0 F), V is the battery voltage (6.00 V), R is the resistance (120 Ω), and t is the time (0.00100 s).
1. Calculate the product of resistance and capacitance: RC = 120 Ω * 10.0 F = 1200 s.
2. Calculate the negative exponent term: -t / (RC) = -0.00100 s / 1200 s = -0.000000833.
3. Evaluate e^(-t / (RC)): e^(-0.000000833) ≈ 0.99917.
4. Subtract the result from step 3 from 1: 1 - 0.99917 ≈ 0.00083.
5. Multiply the result from step 4 by the product of capacitance and voltage: 0.00083 * (10.0 F * 6.00 V) ≈ 49.3 μC.
So, the charge on the capacitor 0.00100 s after the connection is made is approximately 49.3 μC.
To know more about capacitance click on below link:
https://brainly.com/question/28445252#
#SPJ11
when a charge is accelerated through a potential difference of 550v,it's kinetic energy increases from 2.0×10^-6 to 6.0×10^-5.what is the magnitude of the charge
The magnitude of the charge is approximately 1.05×10^-7 Coulombs.
How to solve for the magnitudeWe can use the conservation of energy principle to determine the magnitude of the charge. According to this principle, the increase in kinetic energy of the charge is equal to the work done on the charge by the electric field:
ΔK = qΔV
where ΔK is the change in kinetic energy of the charge, q is the magnitude of the charge, and ΔV is the potential difference across which the charge is accelerated.
In this case, we are given ΔV = 550 V, ΔK = 6.0×10^-5 J - 2.0×10^-6 J = 5.8×10^-5 J. Substituting these values into the equation above, we get:
5.8×10^-5 J = q(550 V)
Solving for q, we get:
q = 5.8×10^-5 J / (550 V)
≈ 1.05×10^-7 C
Therefore,We can use the conservation of energy principle to determine the magnitude of the charge. According to this principle, the increase in kinetic energy of the charge is equal to the work done on the charge by the electric field:
ΔK = qΔV
where ΔK is the change in kinetic energy of the charge, q is the magnitude of the charge, and ΔV is the potential difference across which the charge is accelerated.
In this case, we are given ΔV = 550 V, ΔK = 6.0×10^-5 J - 2.0×10^-6 J = 5.8×10^-5 J. Substituting these values into the equation above, we get:
5.8×10^-5 J = q(550 V)
Solving for q, we get:
q = 5.8×10^-5 J / (550 V)
≈ 1.05×10^-7 C
Therefore, the magnitude of the charge is approximately 1.05×10^-7 Coulombs.
Read more on magnitude here:https://brainly.com/question/30337362
#SPJ1
. a 20.0 khz, 16.0 v source connected to an inductor produces a 2.00 a current. what is the inductance?
The inductance of the inductor is 63.3 μH. To find the inductance of an inductor connected to a 20.0 kHz, 16.0 V source producing a 2.00 A current, we can use the formula V = L * (ΔI/Δt), where V is the voltage, L is the inductance, ΔI is the change in current, and Δt is the change in time.
First, we need to find the angular frequency (ω) using the formula ω = 2 * π * f, where f is the frequency. In this case, ω = 2 * π * 20,000 Hz = 125,664 rad/s.
Next, we can use Ohm's law for inductors, V = I * jωL, where j is the imaginary unit. We know V = 16.0 V, I = 2.00 A, and ω = 125,664 rad/s. Solving for L, we get L = V / (I * ω) = 16.0 V / (2.00 A * 125,664 rad/s) = 0.0000633 H or 63.3 μH.
To know more about inductance refer here:
https://brainly.com/question/30434803#
#SPJ11
Describe three more examples of energy transformations in sentences--what was
the starting energy, and what did it transform into
--what were the demos we did in class last week? (examples: buzzer,
glowstick, hand crank light, tv, computer, cell phone)
1.
2.
3.
Energy transformation is the process of changing one form of energy into another form. It involves the conversion of energy from one form to another, such as mechanical energy to electrical energy or chemical energy to thermal energy. This process is fundamental to the functioning of the universe, and it occurs in natural and man-made systems alike.
Learn about energy transformation here https://brainly.com/question/30938355
#SPJ1
consider a 150 turn square loop of wire 19.5 cm on a side that carries a 42 a current in a 1.65 t field
We can use the formula for the magnetic torque on a current loop to solve this problem. The magnetic torque on a current loop is given below. So the magnetic torque on the loop is 426.6 N-m.
Here τ = NIA × B
Here τ is the torque, N is the number of turns, I is the current, A is the area of the loop, B is the magnetic field, and × denotes the vector cross product.
In this case, we have N = 150 turns,
I = 42 A,
A = (19.5 cm)
= 0.038025 , and B = 1.65 T.
We can find the direction of the torque by using the right-hand rule: if we curl the fingers of our right hand in the direction of the current in the loop and then point our thumb in the direction of the magnetic field, our thumb will point in the direction of the torque. In this case, the torque will be perpendicular to both the current and the magnetic field, so it will be perpendicular to the plane of the loop.
Plugging in the numbers, we get:
τ = (150)(42 A)(0.038025 ) × (1.65 T) = 426.6 N-m
Learn more about current visit: brainly.com/question/1100341
#SPJ4
Correct Question:
Consider a 150 turn square loop of wire 19.5 cm on a side that carries a 42 a current in a 1.65 t field. What is the magnitude of the torque in N·m
Consider an electromagnetic wave having a peak magnetic field strength of 2.5 × 10 − 9 T. Find the average intensity of such a wave in W / m 2 .
The average intensity of such an electromagnetic wave is approximately 9.81 × 10^−12 W/m².
To find the average intensity of the electromagnetic wave, we can use the equation:
I = (1/2)εcE^2
where I is the intensity, ε is the permittivity of free space (8.85 × 10^-12 F/m), c is the speed of light (3 × 10^8 m/s), and
E is the peak electric field strength.
However, we are given the peak magnetic field strength, not the peak electric field strength.
So, we need to use the relationship between the magnetic field and electric field in an electromagnetic wave:
B = E/c
where B is the peak magnetic field strength.
Rearranging this equation, we can solve for E:
E = Bc
Substituting this into the equation for intensity, we get I = (1/2)εc(Bc)^2
Simplifying this expression, we get I = (1/2)εc^3B^2
Now we can plug in the given value for the peak magnetic field strength:
I = (1/2)(8.85 × 10^-12 F/m) (3 × 10^8 m/s)^3(2.5 × 10^-9 T)^2
Calculating this expression, we get:
I = 2.34 × 10^-15 W/m^2
Therefore, the average intensity of the electromagnetic wave is 2.34 × 10^-15 W/m^2.
To find the average intensity of the electromagnetic wave with a peak magnetic field strength of 2.5 × 10^−9 T, we can use the following formula:
Intensity (I) = (1/2) × μ₀ × c × B₀^2
where:
μ₀ = permeability of free space (4π × 10^−7 T·m/A)
c = speed of light in a vacuum (3 × 10^8 m/s)
B₀ = peak magnetic field strength (2.5 × 10^−9 T)
Substitute the given values into the formula:
I = (1/2) × (4π × 10^−7 T·m/A) × (3 × 10^8 m/s) × (2.5 × 10^−9 T)^2
I ≈ 9.81 × 10^−12 W/m²
The average intensity of such an electromagnetic wave is approximately 9.81 × 10^−12 W/m².
To learn more about electromagnetic:
brainly.com/question/23727978
brainly.com/question/31039466
#SPJ11
A guitar string is stretched between supports that are 60 cm apart. The string is observed to form a standing wave with three antinodes when driven at a frequency of 420 Hz. What is the frequency of the fifth harmonic of this string?
The frequency of the fifth harmonic of the guitar string is 700 Hz.
The frequency of the fifth harmonic of the guitar string can be calculated using the formula f_n = n(v/2L), where f_n is the frequency of the nth harmonic, v is the speed of sound in the string, L is the length of the string, and n is the harmonic number.
In this case, we know that the distance between the supports is 60 cm, which is half the length of the string (since the standing wave has three antinodes). Therefore, the length of the string is 2*60 cm = 120 cm = 1.2 m.
We also know that the frequency of the third harmonic is 420 Hz. Using the formula above, we can solve for the speed of sound in the string:
420 Hz = 3(v/2*1.2m)
v = (420 Hz * 2 * 1.2m)/3
v = 336 m/s
Now we can use the same formula to find the frequency of the fifth harmonic:
f_5 = 5(336 m/s/2*1.2m)
f_5 = 700 Hz
Therefore, the frequency of the fifth harmonic of the guitar string is 700 Hz.
Know more about Frequency here:
https://brainly.com/question/25867078
#SPJ11
on a hot day, the freezers in a particular ice cream shop maintain an average temperature of tc = -12° c while the temperature of the surroundings is th = 29° c.
calculate the maximum coefficient of performance COP for the freezer
As a result, the freezer's maximum coefficient of performance (COP) is around 7.37.
The ratio of heat extracted from the cooled chamber to the work performed by the compressor is known as the coefficient of performance (COP) of a refrigerator or freezer. The highest COP is determined by the Carnot efficiency for a refrigerator or freezer operating between two thermal reservoirs at temperatures Th and Tc (where Th > Tc):
In this instance, the outside temperature is Th = 29°C, or 302 K, while the freezer's internal temperature is Tc = -12°C, or 261 K. When we enter these values into the formula above, we obtain:
COP_max = Th / (Th - Tc)
COP_max = 302 K / (302 K - 261 K)
= 302 K / 41 K
≈ 7.37
Learn more about temperature visit: brainly.com/question/24746268
#SPJ4
As a result, the freezer's maximum coefficient of performance (COP) is around 7.37.
The ratio of heat extracted from the cooled chamber to the work performed by the compressor is known as the coefficient of performance (COP) of a refrigerator or freezer. The highest COP is determined by the Carnot efficiency for a refrigerator or freezer operating between two thermal reservoirs at temperatures Th and Tc (where Th > Tc):
In this instance, the outside temperature is Th = 29°C, or 302 K, while the freezer's internal temperature is Tc = -12°C, or 261 K. When we enter these values into the formula above, we obtain:
COP_max = Th / (Th - Tc)
COP_max = 302 K / (302 K - 261 K)
= 302 K / 41 K
≈ 7.37
Learn more about temperature visit: brainly.com/question/24746268
#SPJ4
Question 1 Two spheres are attached to a rod of negligible mass. The distance d = 0.8 m. The spheres each have mass 6 kg. A torque M = 7e0.57t Nm is applied. The system starts at rest. d d M What is the magnitude of the linear velocity of the spheres after 1.4 seconds?
The magnitude of the linear velocity of each sphere after 1.4 seconds is 0.472 m/s.
How to find the magnitude of the linear velocity of the spheres after 1.4 seconds?We can use the fact that the linear velocity of a point on the surface of a rotating sphere is given by v = ωr, where ω is the angular velocity and r is the radius of the sphere.
The moment of inertia I of the system is given by I = I1 + I2, where I1 and I2 are the moments of inertia of the two spheres about the axis of rotation.
For two identical spheres of mass m and radius r, the moment of inertia about an axis passing through the center of mass and perpendicular to the axis passing through the centers of the two spheres is given by I = (2/5)mr^2. Therefore, for our system, we have:
I = [tex](2/5)mr^2 + (2/5)mr^2 + md^2= (4/5)mr^2 + md^2[/tex]
Substituting the given values, we get:
I =[tex](4/5)(6 kg)(0.4 m)^2 + (6 kg)(0.8 m)^2= 3.84 kg m^2[/tex]
The torque M applied to the system is given by:
M = Iα
where α is the angular acceleration of the system. Since the system starts from rest, its initial angular velocity is zero, and we can use the equation:
ω = ω0 + αt
to find the angular velocity ω after a time t. Integrating both sides of the equation gives:
θ = (1/2)α[tex]t^2[/tex]
where θ is the angular displacement of the system. We can use this equation to find the angular displacement θ after a time t, and then use the equation:
ω² = ω[tex]0^2[/tex] + 2αθ
to find the final angular velocity ω.
Substituting the given values, we get:
7e0.57t = (3.84 kg m²)α
α = (7e0.57t) / (3.84 kg m²)
θ = (1/2)αt² = (1/2)(7e0.57t / 3.84)(1.4)² = 1.066 rad
ω² = 2αθ = 2(7e0.57t / 3.84)(1.066) = 1.391
ω = 1.18 rad/s
The linear velocity of a point on the surface of each sphere is given by:
v = ωr
where r is the radius of the sphere. Substituting the given values, we get:
v = (1.18 rad/s)(0.4 m) = 0.472 m/s
Therefore, the magnitude of the linear velocity of each sphere after 1.4 seconds is 0.472 m/s.
Learn more about linear velocity
brainly.com/question/13723307
#SPJ11
a 7.06-hp motor lifts a 243-kg beam directly upward at a constant velocity from the ground to a height of 37.1 m. how much time is required for the lift? (1 hp = 746 w conversion)
The power at velocity of the engine must first be converted from horsepower to watts: Therefore, 16.69 seconds are needed for the lift.
Next, we may calculate the beam's lifting velocity using the work-energy theorem: 7.06 hp x 746 W/hp = 5271.76 W
W = ΔE = mgh
Here W is the work done by the motor, ΔE is the change in potential energy of the beam, m is the mass of the beam, g is the acceleration due to gravity, and h is the height the beam is lifted.
The velocity of the beam:
ΔE = mgh
W = ΔE/t
t = ΔE/W
v = √(2gh)
given values:
ΔE = mgh = 243 kg x 9.81 [tex]m/s^2[/tex] x 37.1 m = 88051.47 J
W = 5271.76 W
t = ΔE/W = 88051.47 J / 5271.76 W = 16.69 s
v = √(2gh) = √(2 x 9.81 m/s^2 x 37.1 m) = 26.03 m/s
Learn more about velocity visit: brainly.com/question/24445340
#SPJ4
a spacecraft of the trade federation flies past the planet coruscant at a speed of 0.650 cc. a scientist on coruscant measures the length of the moving spacecraft to be 77.0 mm. and its height to be 48.0m. The spacecraft later lands on Coruscant and the same scientist measures the length of the now stationary spacecraft.
What value does she get?
Based on your question, the spacecraft is flying past the planet Coruscant at a speed of 0.650 times the speed of light (c). We can use the concept of length contraction from the theory of special relativity to find the length of the stationary spacecraft.
The formula for length contraction is:
L = L0 / sqrt(1 - v^2/c^2)
Where L is the contracted length (77.0 mm), L0 is the proper length (length when the spacecraft is stationary), v is the velocity (0.650c), and c is the speed of light.
Rearranging the formula to solve for L0, we get:
L0 = L * sqrt(1 - v^2/c^2)^(-1)
L0 = 77.0 mm * sqrt(1 - (0.650c)^2/c^2)^(-1)
L0 ≈ 99.6 mm
So, when the spacecraft is stationary on Coruscant, the scientist measures its length to be approximately 99.6 mm.
Learn more about spacecraft here:
https://brainly.com/question/13478702
#SPJ11
If a car has a mass of 1225 kg and a speed of 94.5 m/s, what is its momentum?
answer choices
o 35000 kg*m/s
o 29 kg*m/s
o 75000 kg*m/s
o 48 kg*m/s
The momentum of the car can be calculated using the formula:
p = m*v
where p is the momentum, m is the mass of the car, and v is the speed of the car.
Substituting the given values, we get:
p = 1225 kg * 94.5 m/s
p = 115762.5 kg*m/s
Therefore, the momentum of the car is 115762.5 kg*m/s.
Among the answer choices, the closest value to this is 75000 kg*m/s, but it is not the correct answer. So none of the answer choices provided is correct.
To know more about momentum visit here :
https://brainly.com/question/2856266
#SPJ11
an aluminum power transmission line has a resistance of 0.0360 ω/km. what is its mass per kilometer (in kg/km)? (assume the density of aluminum is 2.7 ✕ 103 kg/m3.)
The mass per kilometer of the aluminum wire such that the resistance of the wire is 0.0360 Ω/km is 21,15 kg/km.
To find the mass per kilometer of the aluminum power transmission line, we need to follow these steps:
1. Calculate the cross-sectional area (A) of the wire using the resistance formula:
R = ρL/A, where R is resistance, ρ is resistivity, L is length, and A is the cross-sectional area.
We need to find the resistivity of aluminum first, which is approximately 2.82 × 10^(-8) Ωm.
2. Rearrange the formula to solve for A: A = ρL/R.
3. Substitute the given values and solve for A:
A = (2.82 × 10⁻⁸ Ωm) × (1000 m) / (0.0360 Ω)
A = 7.83 × 10⁻⁴ m²
4. Calculate the volume per kilometer (V) by multiplying the cross-sectional area (A) by the length (L): V = A × L.
5. Substitute the values and solve for V:
V = (7.83 × 10⁻⁴ m²) × (1000 m)
V = 0.783 m³
6. Finally, calculate the mass per kilometer (M) by multiplying the volume (V) by the density (ρ) of aluminum: M = V × ρ.
7. Substitute the values and solve for M:
M = (0.783 m³) × (2.7 × 10³ kg/m³)
M = 21,15 kg/km
So, the mass per kilometer of the aluminum power transmission line is approximately 21,15 kg/km.
Learn more about resistivity:
https://brainly.com/question/13735984
#SPJ11
calculate the angular momentum (in kg·m2/s) of an ice skater spinning at 6.00 rev/s given his moment of inertia is 0.430 kg·m2.
The angular momentum (in kg·m2/s) of an ice skater spinning at 6.00 rev/s given his moment of inertia is 0.430 kg·m2, is approximately 16.20 kg·m²/s.
The angular momentum is given by :
Angular Momentum (L) = Moment of Inertia (I) × Angular Velocity (ω)
L= I * ω
We are given the moment of inertia (I) as 0.430 kg·m² and the spinning rate as 6.00 rev/s.
First, we need to convert the spinning rate from revolutions per second to radians per second, using the conversion factor 2π radians = 1 revolution:
Angular Velocity (ω) = 6.00 rev/s × (2π radians/1 rev) ≈ 37.68 rad/s
Now, we can calculate the angular momentum (L):
L = 0.430 kg·m² × 37.68 rad/s
≈ 16.20 kg·m²/s
So, the angular momentum of the ice skater spinning at 6.00 rev/s with a moment of inertia of 0.430 kg·m² is approximately 16.20 kg·m²/s.
Learn more about angular momentum here:
https://brainly.com/question/4126751
#SPJ11
-Elastic Strain, Deflection and Stability
A 1 X 2-in bar is 20 in long and made of aluminum haveing a Sy = 25 ksi .With a safety factor of 4, what axial compressive load can be applied if
(A) both ends are himged?
(B) One end is built in and the other is unsupported as in figure E below.
The axial compressive load that can be applied to the aluminum bar with both ends is 6,939 lbs. The axial compressive load that can be applied to the aluminum bar with one end built-in and the other unsupported is 14,714 lbs.
(A) For a pinned-pinned column, k = 1.0. Therefore, the critical load for buckling is:
[tex]P = (\pi^2 * E * I) / L^2P = (\pi^2 * 10 \times 10^6 psi * 2.67 in^4) / (20 in)^2[/tex]
P = 27,755 lbs
To account for a safety factor of 4, the allowable compressive load is:
Allowable load = P / 4 = 6,939 lbs
(B) For a fixed-free or built-in and unsupported column, k = 0.7. Therefore, the critical load for buckling is:
[tex]P = (\pi^2 * E * I) / (0.7 * L)^2P = (\pi^2 * 10 \times 10^6 psi * 2.67 in^4) / (0.7 * 20 in)^2[/tex]
P = 58,857 lbs
To account for a safety factor of 4, the allowable compressive load is:
Allowable load = P / 4 = 14,714 lbs
Deflection refers to the bending or deformation of a structural element under the action of an external load. It is a common phenomenon that occurs in various engineering applications, such as bridges, buildings, and machines. When a load is applied to a structural element, such as a beam or column, it experiences stress, which results in deformation or bending.
The amount of deflection that occurs in a structural element depends on various factors such as the magnitude and direction of the load, the material properties of the structural element, and the geometry of the element. Deflection is an important consideration in the design of any structural system because excessive deflection can result in failure or collapse of the structure.
To learn more about Deflection visit here:
brainly.com/question/14127309
#SPJ4
A 120 μF capacitor is connected to an ac generator with an rms voltage of 25.0 V and a frequency of 130.0 Hz .What is the rms current in this circuit? ....A
The RMS current in the circuit is 0.116 A. The magnitude of the impedance is used because the current is in phase with the voltage, so there is no phase shift. The unit of the current is amperes (A).
What is the RMS current in a circuit with a 120 μF capacitor?
The impedance of a capacitor in an AC circuit is given by:
Z = 1/(jωC)
where j is the imaginary unit, ω is the angular frequency in radians per second, and C is the capacitance in Farads.
In this problem, the capacitance is 120 μF, which is 0.00012 F, and the frequency is 130.0 Hz. So, the angular frequency is:
ω = 2πf = 2π × 130.0 = 816.8 rad/s
Plugging these values into the impedance formula, we get:
Z = 1/(j × 816.8 × 0.00012) = -214.9j Ω
Note that the impedance of a capacitor is purely imaginary and negative.
The RMS current in the circuit is given by Ohm's law:
I = V/RMSZ
where V/RMS is the RMS voltage of the generator.
In this problem, the RMS voltage is 25.0 V, so the RMS current is:
I = 25.0 / |-214.9j| = 25.0 / 214.9 = 0.116 A
The magnitude of the impedance is used because the current is in phase with the voltage, so there is no phase shift. The unit of the current is amperes (A).
To learn more about temperature, visit: https://brainly.com/question/30426519
#SPJ1
what is the escape speed from an asteroid of diameter 395 km with a density of 2360 kg/m3 ?
The escape speed is the minimum speed required to escape the gravitational pull of an object, such as a planet or an asteroid. It is given by the formula: v = √(2GM/R) , Escape speed in this case is more than 2.22 km/s.
The mass of the asteroid can be calculated from its volume and density, using the formula: [tex]M = (4/3)πR^3ρ[/tex] where ρ is the density of the asteroid, and R is its radius. The radius of the asteroid is given as 395 km, or 395,000 meters. Plugging in the values for the radius and density, we get: [tex]M = (4/3)π(395000)^3(2360) = 1.79 x 10^20 kg[/tex]
Now that we know the mass of the asteroid, we can calculate the escape speed using the formula above. Assuming that we are measuring the escape speed at the surface of the asteroid, the distance R is equal to the radius of the asteroid.
Plugging in the values for G, M, and R, we get:[tex]v = √(2(6.6743 x 10^-11 m^3/(kg s^2))(1.79 x 10^20 kg)/(395000 m)) = 2.22 km/s[/tex] Therefore, the escape speed from an asteroid of diameter 395 km with a density of [tex]2360 kg/m^3[/tex] is approximately 2.22 km/s.
This means that any object, such as a spacecraft or a meteoroid, that wants to escape the gravitational pull of the asteroid needs to have a speed greater than 2.22 km/s.
Know more about escape speed here:
https://brainly.com/question/28608063
#SPJ11
if three 2.2 kω resistors are connected in series across a 50 v source, pt equals ________.a. 104.2 mW b. 379 mW c. 52.08 mW d. 402 mW
If three 2.2 kω resistors are connected in series across a 50 v source, pt equals 379 mW. The answer is OPTION B
When the current runs sequentially through the resistors, they are said to be in series. Take a look at Figure 10.3. 2, which depicts three resistors connected in series with a voltage that is equal to Vab. The current through each resistor is the same since there is only one path for the charges to travel through.
Resistors are connected in series when they are connected one after the other. This is seen below. You add up the individual resistances to determine the total overall resistance of several resistors connected in this manner. The following equation is used to accomplish this: Rtotal = R1 + R2 + R3 and so forth. The answer is OPTION B
To learn more about resistors, click here.
https://brainly.com/question/17390255
#SPJ4
If three 2.2 kω resistors are connected in series across a 50 v source, pt equals 379 mW. The answer is OPTION B
When the current runs sequentially through the resistors, they are said to be in series. Take a look at Figure 10.3. 2, which depicts three resistors connected in series with a voltage that is equal to Vab. The current through each resistor is the same since there is only one path for the charges to travel through.
Resistors are connected in series when they are connected one after the other. This is seen below. You add up the individual resistances to determine the total overall resistance of several resistors connected in this manner. The following equation is used to accomplish this: Rtotal = R1 + R2 + R3 and so forth. The answer is OPTION B
To learn more about resistors, click here.
https://brainly.com/question/17390255
#SPJ4
suppose you have a strong peak at 2550 cm−1. what is the wavelength of the radiation that was absorbed? wavelength =
The wavelength of the radiation that was absorbed by the strong peak at 2550 cm⁻¹ is 392 nanometers.
To determine the wavelength of the radiation absorbed, we need to use the equation:
wavelength = speed of light / frequency
We can find the frequency by converting the wavenumber (cm⁻¹) to frequency (Hz) using the equation:
frequency = wavenumber x speed of light
The speed of light is a constant value of 2.998 x 10⁸ m/s.
Converting the wavenumber of 2550 cm⁻¹ to frequency:
frequency = 2550 cm⁻¹ x 2.998 x 10¹⁰ cm/s = 7.652 x 10¹³ Hz
Now we can use the frequency to calculate the wavelength:
wavelength = 2.998 x 10⁸ m/s / 7.652 x 10¹³ Hz = 3.92 x 10⁻⁶ meters or 392 nanometers
Therefore, the wavelength of the radiation absorbed is 392 nanometers.
Learn more about wavelength here: https://brainly.com/question/29213586
#SPJ11
The wavelength of the radiation that was absorbed by the strong peak at 2550 cm⁻¹ is 392 nanometers.
To determine the wavelength of the radiation absorbed, we need to use the equation:
wavelength = speed of light / frequency
We can find the frequency by converting the wavenumber (cm⁻¹) to frequency (Hz) using the equation:
frequency = wavenumber x speed of light
The speed of light is a constant value of 2.998 x 10⁸ m/s.
Converting the wavenumber of 2550 cm⁻¹ to frequency:
frequency = 2550 cm⁻¹ x 2.998 x 10¹⁰ cm/s = 7.652 x 10¹³ Hz
Now we can use the frequency to calculate the wavelength:
wavelength = 2.998 x 10⁸ m/s / 7.652 x 10¹³ Hz = 3.92 x 10⁻⁶ meters or 392 nanometers
Therefore, the wavelength of the radiation absorbed is 392 nanometers.
Learn more about wavelength here: https://brainly.com/question/29213586
#SPJ11
Use the following calorimetric values to answer the question:
The specific heat capacity of water is 4,186 J/kg°C.
The specific heat capacity for copper is 387 J/kg°C.
A 120-g copper ball at 75 °C was dropped into 75 g of water. The final temperature of the water and the ball was 42 °C. What was the initial temperature of the water?
25 °C
37 °C
46 °C
51 °C
Explanation:
Heat lost by copper ball = heat gained by water
(masses need to be in kg)
. 120 kg * 387 J /(kg C) * (75-42 C) = .075 kg * 4186 J/(kg C) * (42-x C)
.120 * 387 * 33 = .075* 4186* (42-x)
shows x = 37.1 C = initial water temp
TRUE OR FALSE
The direction that a front is moving is determined by the point of the triangles or half circles.
!!BRAINLIEST only if the answer is correct !!
True, Fronts are boundaries between different air masses, and their direction of movement is indicated by symbols such as triangles and half circles on weather maps.
What are fronts and how is their direction of movement depicted on weather maps?
In meteorology, a front is a boundary between two different air masses that have different temperature, humidity, or pressure characteristics. Fronts can be depicted on weather maps using symbols, such as triangles or half circles, to represent the direction of movement of the front.
The orientation of the symbols is determined by the direction of the movement of the front, with the point of the triangles or the curved side of the half circles facing in the direction that the front is moving. By looking at the symbols on a weather map, meteorologists can determine the location, speed, and direction of fronts, which are important factors in forecasting weather conditions.
To learn more about meteorologists, visit: https://brainly.com/question/26550989
#SPJ1
The force of Earth\'s gravity pulls down on a snowflake as it floats gently toward the ground. What is the \"equal and opposite force\" during this interaction according to Newton\'s Third Law?A. There is no equal and opposite force in this case.B. The force of the air pushing up on the snowflake.C. The force of the snowflake\'s gravity pulling up on the Earth.D. The force of the snowflake pushing down on the air.
if a light ray is incident from air (n = 1) at an interface with glass (n = 1.6) at an angle of 45° to the normal, then find the angle of refraction.
The angle of refraction when a light ray incident from the air at an interface with glass at an angle of 45° to the normal is approximately 30°.
To find the angle of refraction when a light ray incident from the air (n = 1) at an interface with glass (n = 1.6) at an angle of 45° to the normal, we can use Snell's Law. Snell's Law states:
n1 * sin(θ₁) = n2 * sin(θ₂)
Where n1 and n2 are the refractive indices of the two media, θ₁ is the angle of incidence, and θ₂ is the angle of refraction.
1: Plug in the known values:
1 * sin(45°) = 1.6 * sin(θ₂)
2: Solve for sin(θ₂):
sin(θ₂) = sin(45°) / 1.6
3: Calculate sin(45°) and divide by 1.6:
sin(θ₂) ≈ 0.5
4: Find the angle of refraction (θ₂) using the inverse sine function:
θ₂ = arcsin(0.5)
θ₂ ≈ 30°
Learn more about refraction: https://brainly.com/question/27932095
#SPJ11