The scale on a map states that 1 centimeter corresponds to 20 kilometers. On the map, two cities are 0.3 cm apart. Find the actual distance.a.6 kmc.0.6 kmb.600 kmd.60 km

As according Scientific American, even one photon can result in a visible burst of light.

The human eye can see about 10 photons.To an eye accustomed to the dark, the weak light may appear to be flashing, yet each twinkling just represents a few photons.When shooting images of the cosmos from orbit with very sensitive equipment at very low temperatures, a photon stream would be sufficient.

The answer is yes because the receptors in the retina can respond to a single photon.However, brain filters only allow a signal to pass through and activate the brain when five to nine additional signals do the same in less than a hundred milliseconds.

To know more about magnitude visit:

https://brainly.com/question/14452091

#SPJ4

It's crucial to inspect the brake drums as part of your walk-around examination before setting off on a journey. If any brake drum has a crack that is more than half the breadth of the friction region.

Overheating and undercooling of the brake pedal during operation might result in cracked drums.

Drums with cracks need to be changed right away. Blue ground -High temperatures, braking imbalance, abrupt stops, dragging brakes, or glazed brake pads can all result in blue drums. If no cracks have appeared, blue drums can still be utilized.

To know more about brake drums visit:

brainly.com/question/20895055

#SPJ4

The torque of a lever is equal to the perpendicular force multiplied by the length of the lever arm, which is the distance from the fulcrum of the lever.

The formula for torque is rF=rFsin(r). Torque is, in other words, the cross product of the distance vector (the distance between the pivot point and the point at which force is applied) and the force vector, where the angle 'a' between r and F is.

The SI unit for torque is the Newton-metre, or kgm2sec-2. Taking into account the formula Torque = Force X Distance While distance and force are measured in meters and newtons, respectively, torque is measured in newton-meters.

To know more about torque visit:-

https://brainly.com/question/6855614

#SPJ4

With 20.23 ms⁻¹,  maximum speed can it go around a curve having a radius of 60.0 m

The highest rate of speed a person can reach is called maximum speed. When athletes alter the magnitude (how quickly they are moving) or direction (or both) of their motion, or both, their acceleration changes as well since acceleration is related to velocity, which has both a magnitude and a direction connected with it.

ac max = V² max / R   ....(1)

Inserting given values we get

ac, max  =  (34.5)² / 150 = 7.935 ms⁻²

For a changed radius of the curve of 60.0 m, the maximum safe speed from (1) becomes

Unew, max= √ac, max R new

Unew, max = √6.826 x 60

Unew, max 1 = 20.23 ms⁻¹, rounded to one decimal place.

To learn more about speed from given link

https://brainly.com/question/13262646

#SPJ4

Answer: 165 N.

Explanation: To find out how much force was applied by the friend, you need to use the following formula:

F = ma where F is force, m is mass, and a is acceleration. Now we can plug in the values given.

F = 55 x 3 = 165

F = 165

The amount of force the friend applied is 165 N.

Hope this helps! :)

The airplane that starts from rest and accelerates at 1 constant 3 m/s2 for 30 s before leaving the ground moved by the distance of 1350m.

Acceleration is given as 3.00 m/s2

Time is 30 sec.

The formula we can use in this case is:

s = ut + 0.5 at^2

v = at + u

where,

s is distance travelled

u is initial velocity = 0 since at rest

t is time travelled

a is acceleration

v is the final velocity when it took off

a. s = 0 + 0.5 * 3 * 30^2

s = 1350 m

The distance moved by the airplane is 1350 m.

To know more about acceleration:

brainly.com/question/28743430

#SPJ4

A simulation because it replicates a molecule's internal operation.

Heat is the primary source of particle motion on Earth. The temperature of any substance is correlated with the energy of the atoms and molecules that comprise it. Energy is conserved, thus if one particle loses energy, another one acquires it.

Translational motion is the term used to describe how an atom may travel from one place in space to another. Additionally, molecules composed of several atoms can vibrate because of chemical bonds, which cause the atoms to move about their equilibrium position like springs.

To know more about simulation visit:

brainly.com/question/25583986

#SPJ4

This is not a gamma radiation because there is a change in the atomic number of the daughter nucleus. It is rather a beta decay.

We have to note that when we talk about a decay we are talking about the manner that we can be able to break up the atom of a radioactive substance so that we can be able to produce a new substance.

We can see now that what we have here is the loss of a beta ray or an electron from the specie that is shown. This is evidenced by the change in the atomic number of the daughters nucleus.

Learn more about radioactive decay:https://brainly.com/question/1770619

#SPJ1

We will understand the given concept through an example

The rat serves as your point of reference if you mentioned that the rabbit was to the left of it. You are expressing its position when you specify the distance and direction. The present separation and direction of an object from a reference point is its position.

To know more about reference point here

https://brainly.com/question/17706833

#SPJ4

The radio wave's wavelength is 1.0 m. A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles.

The following formula was used to determine the frequency:

radio wave speed, c = radio wave frequency / radio wave length

c = f x λ

Because a radio wave is an electromagnetic wave and travels at the same speed as light, its speed, c = 3 x 108 m/s, is equal to the speed of light in this case.

When the formula

3 x 108= f x 1.0

f = 3 x 108/1

f = 3 x 108 Hz is used,

Radio waves therefore have a frequency of 3 x 108 Hz.

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ1

Speed is a scalar quantity that is independent of direction. It is equal to the total distance traveled divided by the total time spent. This means that a plane can normally travel 3952 kilometers in three hours.

Step 1: Make a note of each time the direction changes. Step 2: Determine the distance traveled between each change in direction. Step 3: The total distance traveled is the sum of all the distances from step 2.

As a result, its typical speed is Speed = total distance / total time Speed = 3952 / 3 Speed = 1317.33 km/h.

However, under cloudy conditions, it will travel 184 km less in the same amount of time.

Then, we want to determine the speed under cloudy conditions. Since speed is equal to the total distance divided by the total amount of time, we need to know the total distance under cloudy conditions.

Total distance is equal to the normal distance traveled minus the delay caused by cloudy conditions Total distance. = 3952 - 184 Total distance = 3768 km Total time = 3 hours Speed = 3768 / 3 Speed = 1256 km/hr The plane is traveling at a speed of 1256 km/hr in cloudy conditions. Because it covered less ground in the same amount of time, its speed decreases.

To learn more about total distance here:

https://brainly.com/question/6516113

#SPJ1

The length of the chord of the circle in cm will be equal to 7.07cm.

A chord can be defined as that line segment which joins any two points on the circumference of a circle. The chord of a particular circle is subtending a 90° angle at its center. The radius of the circle is OA = OB =5cm.  

To find the length of the chord AB, we use the Pythagorean Theorem

OA² + OB² = AB²

⇒ 5² + 5² = AB²

⇒ AB = √50 = 7.07 cm

The length of the chord AB is equal to 7.07cm.

To know more about Pythagorean Theorem here

https://brainly.in/question/13839878

#SPJ4

Placing the diagonal of the square along the line of the first distance mark on the beam, place one square load, one unit of length, along the beam from the pivot. One square load should be placed on the opposite side of the pivot to roughly balance this.

For calibrating masses between 10 mg and 1 kg, a beam balance is utilised. Depending on the calibre and sharpness of the knife edge used to make the pivot, a given measurement can be made with a given resolution and accuracy.

A physical balance is essentially just a tool for gauging weight. With the aid of another object whose weight is known, it is used to determine the weight of any unknown object.

To know more about beam visit:-

https://brainly.com/question/28288610

#SPJ4

Make sure that software and hardware developed by various manufacturers can cooperate.

A vendor is generally anybody who buys and sells goods or services. A vendor purchases products and services to resale them to different companies or individuals. Several different vendors provide the goods that big box stores like Target buy at deep discounts and then resale at higher retail rates.

The five major types of vendors are manufacturers, wholesalers, merchants, services and maintenance providers, independent vendors, and trade show representatives. Suppliers are sometimes referred to as the first link in a supply chain because they exclusively conduct business with other businesses. Contrarily, a vendor is a business or person that purchases things from a company and then sells them to another party.

To learn more about vendors refer to:

brainly.com/question/24852211

#SPJ4

The reason that  speed of a competitor changes during the race is that

The speed of a competitor during a race can change for a variety of reasons. Some of the most common include the following:

Physical condition: A competitor's physical condition can change during a race, leading to a change in their speed. For example, a runner may start off strong but tire as the race progresses, causing their speed to decrease.

Terrain: The terrain of the race can also have an impact on a competitor's speed. Running uphill, for example, typically requires more effort and can slow a competitor down, while running downhill can allow them to pick up speed.

Weather: Weather conditions can also affect a competitor's speed during a race. Running in hot, humid conditions, for example, can make it more difficult for a competitor to maintain a high level of performance.

Strategy: Competing athlete has a strategy to maintain a sustainable pace which he could not change that often, it could lead to either decrease or increase in speed.

Tactics: Athletes may also adjust their tactics during a race in response to the competition. For example, a runner may slow down to conserve energy in the early stages of a race in order to have a stronger finish.

Injury: Sometimes, an injury can happen during a race and it can force the athletes to adjust their speed to adapt.

In all, the speed of a competitor during a race can change for a variety of reasons related to their physical condition, the terrain, weather, strategy, tactics and injury.

Learn more about race from

https://brainly.com/question/3681644

#SPJ1

The static friction and the normal force are related to each other as ≤.

Static friction is a force that prevents an item from moving. The friction encountered when persons attempt to move a stationary object on a surface without actually causing any relative motion between the body and the surface on which it is located. Static friction occurs between two fixed things, whereas kinetic friction occurs when two items move. Static friction varies while kinetic friction remains constant.

The normal force is the force exerted by surfaces to prevent solid objects from passing through them. A contact force is normal force. According to Newton's third law, this force on the platform must be followed by an equal and opposite force delivered to the man by the platform. This force is identical to the normal force.

To learn more about static friction and normal force, here

https://brainly.com/question/28980615

#SPJ4

The required total momentum of the system at this instant is calculated to be 9.16 kg m/s.

Given that,

Mass of the first cart, m₁ = 2.5 kg

Mass of the second cart, m₂ = 1.3 kg

Velocity of the first cart before collision, u₁ = 4.6 m/s

Velocity of the second cart before collision, u₂ = -1.8 m/s

The total momentum of the system before collision is calculated as follows,

P t = P₁ + P₂

P t = m₁ u₁ + m₂ u₂ = 2.5 × 4.6 + (1.3 × -1.8) = 11.5 - 2.34 = 9.16 kg m/s

Thus, total momentum of the system of the two carts at this instant is 9.16 kg m/s.

To know more about momentum:

https://brainly.com/question/22715086

#SPJ4

The required longitude of the certain ship when the time of the day is 12 noon at the Prime Meridian is 5 p.m is 75° West.

The sun is highest in London, but will not pass the ship for another 5 hours.

Given that,

The time of day for a certain ship is 12 noon at the Prime Meridian is 5 p.m.

The ship must be five hours west of Greenwich since the sun goes from east to west.

Each hour of sun motion is 15° of longitude. The ship is located at (5 x 15°) = 75° West longitude.

Thus, the ship's longitude is 75° West.

To know more about longitude:

https://brainly.com/question/620005

#SPJ4

The electroscope must have received a total charge of 2.45 x q if the wires are each at a 26° angle with the vertical.

An electroscope is a scientific tool which is used to find the existence of an electric charge on a body. The first electroscope with a pivoting needle, known as a versorium, was created by British physician William Gilbert in the year 1600.

An electroscope is a piece of equipment used in science to determine whether and how much electric charge is present on a body. There are three traditional electroscope types: the needle electroscope, the gold-leaf electroscope, and the pith-ball electroscope (third). For each of them, we have simulators available.

Equilibrium condition = mgsin∅ = 2.45 x [tex]10^{-6}[/tex]

To learn more about electroscope visit:
brainly.com/question/29073064

#SPJ4

If the sailor’s eye level is 14 feet above the water, So the ship from the rocks is 41.62 feet far from the sailor.

The main concepts required to solve this problem are the trigonometric properties and the distance. Later, use the tangent function and substitute the values. Finally, rearrange the tangent equation to calculate the distance of the ship from the rocks.

tan30.0°=35ft./19ft.+x

1/√3=35ft./19ft.+x

x=(35ft.) ([Equation]3)-19ft.

=41.62ft.

A tangent equation is an equation that describes a line that touches a given curve at a single point. It is usually expressed in the form y=mx+b, where m is the slope of the line and b is the y-intercept. To find the equation of a tangent, one must calculate the slope of the line at the point of tangency. This can be done by taking the derivative of the equation of the curve at that point.

The derivative will be the slope of the tangent, so this can be substituted into the tangent equation. The y-intercept can be found by plugging the x-coordinate of the point of tangency into the equation of the curve and solving for y. This will give you the y-intercept of the tangent equation. Through this process, one can find the equation of a tangent to any given curve.

To learn more about Tangent equations visit here:

brainly.com/question/29180943

#SPJ4

The resistor that is equivalent to the resistance of the circuit is 1 2/7 Ohms

The equivalent resistance of a circuit is the (single) resistance that can replace the combination of resistances in the circuit such that the current flowing in the circuit remains the same.

Please find attached the drawing of the circuit, created with an online circuit building tool.

Whereby the capacitor also acts as a resistor of 6 Ohms, we get;

Resistors R₄, R₅, and R₆ are parallel

The resistor equivalent to the three resistors is found as follows;

Req₁ =  1/(1/R₄ + 1/R₅ + 1/R₆)

Therefore, Req₁ = (1/(1/2 + 1/1 + 1/6)) = 0.6

Req₁ is in series with R₁, therefore;

Req₂ = Req₁ + R₁ = 0.6 + 3 = 3.6

Req₂, (Req₁ + R₁  combined) is parallel to R₂ and R₃, therefore;

Req₃ = 1/(1/Req₂ + 1/R₂ + 1/R₃)

Req₃ = 1/(1/3.6 + 1/3 + 1/6) = 9/7 = 1 2/7

The equivalent resistor of the circuit is 1 2/7 ohms

Learn more on the equivalent resistance of a circuit here: https://brainly.com/question/1437443

#SPJ1

The time on the surface of an object would run most slowly on an object with the same mass as the Sun but twice as large in radius.

What is mass?

Mass is a measure of the amount of matter in an object and is typically expressed in kilograms (kg). It is an intrinsic property of matter and is different from weight, which is a measure of the force of gravity acting on an object. Mass is an important factor in determining the physical properties of an object, such as density, momentum, and inertia. Mass is also used to calculate the gravitational force between two objects, as well as the energy required to move it.

This is because the surface gravity of an object is inversely proportional to the square of its radius. Therefore, the object with the same mass as the Sun but twice as large in radius would have a much lower surface gravity, and time would run more slowly on its surface.

To learn more about mass

https://brainly.com/question/19385703

#SPJ4

Magnetic Resonance Imaging is a technique for producing precise pictures of the brain that uses radio waves and the magnetic fields of the body.

A magnetic field and radio waves produced by a computer are used in the medical imaging procedure known as magnetic resonance imaging (MRI), which produces precise pictures of your body's organs and tissues.

The noninvasive medical imaging procedure known as magnetic resonance imaging, or MRI, creates precise pictures of virtually every internal bodily structure, including the organs, bones, muscles, and blood arteries. A sizable magnet and radio waves are used in MRI scanners to produce pictures of the human body.

To know more about Magnetic Resonance visit :

brainly.com/question/20371187

#SPJ4