the ph of a 0.02 m solution of an unknown weak acid is 8.1. what is the pka of this acid

The composition of this copolymer at the end of the reaction would be F, -1 (almost pure monomer 2) (Option E).

Copolymers are formed from the combination of two or more monomers in varying proportions, and the composition of the copolymer depends on the ratio of the monomers in the feed. As the reaction proceeds, the concentration of each monomer in the feed changes, leading to a change in the composition of the copolymer. Therefore, it is difficult to predict the exact composition of the copolymer at the end of the reaction. However, if one of the monomers is present in a much higher concentration (i.e., close to pure) compared to the other, then the copolymer would be expected to have a composition close to that of the pure monomer. Hence, option (E) would be the most appropriate answer in this case.

Learn more about copolymer; https://brainly.com/question/15736390

#SPJ11

Matter exists in three different physical states, namely solid, liquid and gaseous states. The three states of matter mainly differ in the arrangement of particles and the force of attraction among the constituent particles.

It has been observed that the matter exists in nature in different forms. Some substances are rigid and have a fixed shape, some substances can flow and can take the shape of the container whereas some other forms do not have any shape or size.

Here A represents Liquid to solid change, B represents Gas to liquid change and C represents Solid to gas change.

To know more about states of matter, visit;

https://brainly.com/question/9402776

#SPJ1

Answer:

To calculate the volume of oxygen required to burn hydrogen, we need to use the balanced chemical equation for the combustion of hydrogen with oxygen which is

2H2(g) + O2(g) → 2H2O(g)

Two moles of hydrogen gas combine with one mole of oxygen gas to form two moles of water vapour, according to this equation. The coefficients in the equation provide information on the mole ratios of the reactants and products.

To determine the volume of oxygen necessary, we must first convert the problem's circumstances to standard temperature and pressure (STP), which are 0 degrees Celsius and 101.3 kPa. This conversion may be accomplished using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Next step is to convert the temperature of -50 degrees Celsius to Kelvin:

T = (−50 + 273.15) K = 223.15 K

Now we can use the ideal gas law to calculate the number of moles of hydrogen required for the reaction:

n(H2) = PV/RT = (50 kPa)(V)/(8.314 J/(mol·K))(223.15 K)

where we have used the units of the gas constant R in Joules per mole Kelvin (J/(mol·K)).

The stoichiometry of the balanced chemical equation may then be used to calculate the amount of moles of oxygen required for the reaction. Because the hydrogen-to-oxygen ratio is 2:1, we require half as many moles of oxygen as hydrogen:

n(O2) = n(H2)/2

Finally, we can use the ideal gas law again to calculate the volume of oxygen required at STP:

n(O2) = PV/RT = (101.3 kPa)(V)/(8.314 J/(mol·K))(273.15 K)

Now we can substitute the expression for n(O2) in terms of n(H2) into the equation for V(O2) and solve for V(O2):

V(O2) = n(O2)RT/P = [(50 kPa)(V)/(8.314 J/(mol·K))(223.15 K)](8.314 J/(mol·K))(273.15 K)/(101.3 kPa)

Simplifying this expression and solving for V(O2), we get:

V(O2) = (V/2) * (101.3/50) * (273.15/223.15) = 3.07 V

As a result, at -50 degrees Celsius and 50 kPa, the volume of oxygen required to burn a given volume of hydrogen in space is 3.07 times the volume of hydrogen. It should be noted that the volume units will be determined by the initial volume supplied for hydrogen in the problem.

(im so sorry if its wrong)

When a pure metal is mixed with another metal, the melting (freezing) temperature can change. This is because the mixture of the two metals creates an alloy, which can have different properties than the individual metals.

The region of the phase diagram that consists entirely of a single liquid phase is the liquid phase region. The region that consists of a single liquid phase and solid tin is the alpha phase region. The region that consists of a single liquid phase and solid bismuth is the beta phase region. The lowest melting temperature possible for any composition of bismuth and tin is the eutectic composition.

The best estimate for the composition that will give the lowest melting temperature is approximately 58% bismuth and 42% tin. When a eutectic composition is mixed with either one of the metal components, the melting (freezing) temperature remains the same. If a third metal were added to the composition, the melting (freezing) temperature could change depending on the properties of the third metal and its interaction with the other two metals in the alloy.

Overall, the melting (freezing) temperature of an alloy depends on the composition of the alloy and the properties of the individual metals that make it up.

For more about pure metal:

https://brainly.com/question/27736443

#SPJ11

The pH can be determined using the nitrous acid Ka expression before any NaOH is added: pH = pKa + log([HNO2]/[NO2-]). HNO2 is initially present at a concentration of 0.348 M without NaOH.

The moles of NaOH added after the addition of 18.0 mL of NaOH can be computed using the formula (0.348 M) x (0.018 L) = 0.00626 mol. The moles of HNO2 that have reacted are also 0.00626 mol since the reaction between HNO2 and NaOH is a 1:1 reaction. With respect to HNO2, the remaining moles are (0.348 mol) - (0.00626 mol) = 0.34174 mol. (74.5 mL + 18.0 mL) = 92.5 mL is the remaining capacity. pH is calculated using the Henderson-Hasselbalch equation, where [HNO2] is defined as 0.34174 mol/0.0925 L3.69 M and [NO2-] as 0.00626 mol/0.018 L0.348 M. So, pH is equal to 3.35 plus log(3.69/0.348) 3.98. Half of the original moles of HNO2 had interacted with NaOH at the point of half-equivalence. When the volume of additional NaOH supplied is equivalent to half the volume of the first solution of HNO2. HNO2 has a starting mole of (0.348 M) x (0.0745 L) = 0.02597 mol. This half has 0.012985 mol. 0.012985 mol of NaOH are also required to get to this point.

learn more about nitrous acid here:

https://brainly.com/question/17055219

#SPJ11

When sodium hydroxide, NaOH, is used to titrate a quantity of 0.4113 g of an unknown acid HA, the acid's molar mass is 138.7 g/mol if it reacts with 28.10 mL of 0.1055 M aqueous sodium hydroxide. That is option a.

To find the molar mass of the acid HA, we need to first calculate the number of moles of NaOH that reacted with the acid.

Number of moles of NaOH = concentration of NaOH x volume of NaOH used
                             = 0.1055 M x 0.02810 L
                             = 0.002967 mol

Since the acid and the base react in a 1:1 ratio, the number of moles of the acid HA is also 0.002967 mol.

Now we can use the mass and number of moles to calculate the molar mass of the acid.

The molar mass of HA = mass of HA/number of moles of HA
                         = 0.4113 g/0.002967 mol
                         = 138.7 g/mol

Therefore, the molar mass of the acid is 138.7 g/mol, which is option a.

Learn more about molar mass: https://brainly.com/question/837939

#SPJ11

The heat gained by copper when 51.8 g of copper is warmed from 15.5°C to 76.4°C is 1,090.97 J.

To calculate the heat gained, you can use the formula q = mcΔT, where q is the heat gained, m is the mass of copper, c is the specific heat of copper, and ΔT is the change in temperature.

1. Determine the mass (m): 51.8 g
2. Identify the specific heat (c): 0.385 J/(g·°C)
3. Calculate the change in temperature (ΔT): 76.4°C - 15.5°C = 60.9°C
4. Plug the values into the formula: q = (51.8 g) x (0.385 J/(g·°C)) x (60.9°C)
5. Calculate the heat gained (q): 1,090.97 J

To know more about specific heat click on below link:

https://brainly.com/question/11297584#

#SPJ11

The basic hydrolysis of a nitrile yields an amide and then a carboxylic acid salt plus ammonia or an amine.

The first product formed is an amide from the hydrolysis of nitrile. The amide is formed as an intermediate product, and it can be further hydrolyzed under basic conditions to form a carboxylic acid salt (or carboxylate) and either ammonia (NH₃) or an amine (R-NH₂). The final products of the reaction depend on the conditions used and the nature of the nitrile substrate.

The overall reaction can be represented as follows:

R-CN + 2H₂O + OH- → R-COONa + NH₃ (or R-NH₂)

where R is an organic group attached to the nitrile functional group (-CN).

Learn more about hydrolysis here:

https://brainly.com/question/24244589

#SPJ11

The hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we can use the fact that NaOH is a strong base and completely dissociates in water according to the following equation:
NaOH + H2O → Na+ + OH-
This means that for every mole of NaOH added to water, we get one mole of hydroxide ions. Therefore, the hydroxide ion concentration for a 0.0338 M NaOH solution would be:
[OH-] = 0.0338 M
Since water also dissociates to some extent, we can use the fact that Kw (the ion product constant for water) is equal to [H3O+][OH-] = 1.0 x 10^-14 at 25°C. This allows us to calculate the hydronium ion concentration as follows:
[H3O+] = Kw/[OH-] = (1.0 x 10^-14)/0.0338 M
[H3O+] = 2.96 x 10^-13 M
Therefore, the hydronium ion concentration for a 0.0338 M NaOH solution is 2.96 x 10^-13 M, and the hydroxide ion concentration is 0.0338 M.
To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we first need to recognize that NaOH is a strong base that dissociates completely in water. The dissociation equation for NaOH is:
NaOH → Na+ + OH-
Since the concentration of NaOH is 0.0338 M, the concentration of OH- will also be 0.0338 M, as they are produced in a 1:1 ratio. Now, to find the H3O+ concentration, we will use the ion product of water (Kw):
Kw = [H3O+] × [OH-] = 1.0 x 10^-14
We can rearrange the equation to solve for [H3O+]:
[H3O+] = Kw / [OH-]
Substitute the values:
[H3O+] = (1.0 x 10^-14) / 0.0338
[H3O+] ≈ 2.96 x 10^-13 M
So, the hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To learn more about concentration, click here:

brainly.com/question/10725862

#SPJ11

The hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we can use the fact that NaOH is a strong base and completely dissociates in water according to the following equation:
NaOH + H2O → Na+ + OH-
This means that for every mole of NaOH added to water, we get one mole of hydroxide ions. Therefore, the hydroxide ion concentration for a 0.0338 M NaOH solution would be:
[OH-] = 0.0338 M
Since water also dissociates to some extent, we can use the fact that Kw (the ion product constant for water) is equal to [H3O+][OH-] = 1.0 x 10^-14 at 25°C. This allows us to calculate the hydronium ion concentration as follows:
[H3O+] = Kw/[OH-] = (1.0 x 10^-14)/0.0338 M
[H3O+] = 2.96 x 10^-13 M
Therefore, the hydronium ion concentration for a 0.0338 M NaOH solution is 2.96 x 10^-13 M, and the hydroxide ion concentration is 0.0338 M.
To calculate the hydronium ion (H3O+) and hydroxide ion (OH-) concentrations for a 0.0338 M NaOH solution, we first need to recognize that NaOH is a strong base that dissociates completely in water. The dissociation equation for NaOH is:
NaOH → Na+ + OH-
Since the concentration of NaOH is 0.0338 M, the concentration of OH- will also be 0.0338 M, as they are produced in a 1:1 ratio. Now, to find the H3O+ concentration, we will use the ion product of water (Kw):
Kw = [H3O+] × [OH-] = 1.0 x 10^-14
We can rearrange the equation to solve for [H3O+]:
[H3O+] = Kw / [OH-]
Substitute the values:
[H3O+] = (1.0 x 10^-14) / 0.0338
[H3O+] ≈ 2.96 x 10^-13 M
So, the hydronium ion concentration (H3O+) is approximately 2.96 x 10^-13 M, and the hydroxide ion concentration (OH-) is 0.0338 M for the given NaOH solution.

To learn more about concentration, click here:

brainly.com/question/10725862

#SPJ11

When solid sodium nitrite is put into water, it dissolves and dissociates into its ions. The balanced chemical equation for the reaction is:
[tex]NaNO_{2}  (s) + H_{2} O (l) = Na+ (aq) + NO_{2}^{-}  (aq) +  H_{2} O (l)[/tex]

In this equation, [tex]  NaNO_{2}[/tex]    is the solid compound in its solid state, and [tex]  H_{2} O [/tex]   is the water in its liquid state. [tex]Na^{+}[/tex]  and [tex]  NO_{2}^{-}[/tex]     are the ions that are formed when sodium nitrite dissolves in water, and they are in the aqueous state as they are dissolved in water. Since sodium nitrite fully dissociates in water, it is considered a strong electrolyte.

To know more about an electrolyte:

https://brainly.com/question/29771118

#SPJ11

The mole fraction of N2 in the mixture is 0.982, and the mole fraction of Xe is 0.018.

To determine the mole fraction of each gas in the mixture of N2 and Xe, we need to use the ideal gas law equation: PV = nRT.

At STP, P = 1 atm and T = 273 K. The density of the mixture is 1.562 g/L, which can be converted to g/mL by dividing by 1000.

So, the density of the mixture is 0.001562 g/mL. We can use this value to calculate the molar concentration (M) of the mixture as follows:

M = density / molar mass

The molar mass of the mixture can be calculated as the weighted average of the molar masses of N2 and Xe, based on their mole fractions.

Let x be the mole fraction of N2 and (1-x) be the mole fraction of Xe. Then, the molar mass of the mixture is:

Mmixture = x*M(N2) + (1-x)*M(Xe)

where M(N2) = 28 g/mol and M(Xe) = 131.29 g/mol.

Substituting the values, we get:

0.001562 g/mL / Mmixture = x*28 g/mol + (1-x)*131.29 g/mol

Solving for x, we get:

x = 0.982

So, the mole fraction of N2 in the mixture is 0.982, and the mole fraction of Xe is 0.018.

Learn more about fraction here:

https://brainly.com/question/8482939

#SPJ11

The maximum resulting tenacity of a cotton fiber after wet conditioning can be calculated using the following formula:

Maximum resulting tenacity = Dry tenacity / (1 + moisture regain)

Moisture regain is the amount of moisture absorbed by the fiber when it is fully saturated. For cotton, the moisture regain is around 8.5%.

Therefore, using the given dry tenacity of 5 g/den and a moisture regain of 8.5%, we can calculate the maximum resulting tenacity as:

Maximum resulting tenacity = 5 / (1 + 0.085) = 4.58 g/den

Therefore, the closest option to this answer is (a) 3.55 g/den.
After wet conditioning, a cotton fiber's tenacity usually increases. Given that the dry tenacity is 5 g/den, the maximum resulting tenacity, in g/den, that this fiber would achieve is: c. 6.20 g/den.

Visit here to learn more about tenacity brainly.com/question/30672991

#SPJ11

The relationship between the chemical potentials (µ) of species A in the liquid phase and the gas phase, with species B as a non-volatile solute, when the liquid phase of A is in equilibrium with the gas phase of is c. µ(A gas) = µ(A liquid).

The chemical potential of a species in a mixture is defined as the rate of change of free energy of a thermodynamic system with respect to the change in the number of atoms or molecules of the species that are added to the system. When the system is at equilibrium, the chemical potentials of species A in the liquid and gas phases are equal. So the correct answer is:c. µ(A gas) = µ(A liquid).

Learn more about chemical potentials energy : https://brainly.com/question/19291483

#SPJ11

The balanced chemical equation for the reaction between iron (Fe) and nitrogen (N) to form iron nitride (Fe2N) is: 6 Fe + N2 → 2 Fe2N

This equation is balanced because there are equal numbers of atoms of each element on both sides of the arrow, and the ratio of the reactants and products is 6:1 for Fe and N2, and 2:1 for Fe2N.

To balance the equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation. Here's how we can do it:

On the LHS, we have 6 atoms of Fe and 2 atoms of N (since N2 consists of 2 nitrogen atoms bonded together).

On the RHS, we have 4 atoms of Fe (2 atoms in each Fe2N molecule) and 2 atoms of N (1 atom in each Fe2N molecule).

To balance the equation, we can multiply the reactants by 3 to get 6 Fe atoms and 6 N atoms:

6 Fe + 3 N2 → 2 Fe2N

Learn more about balanced reaction here: https://brainly.com/question/26694427

#SPJ1

The obtained negative δs° sign in question 3b is consistent with the expected behavior of salt dissolution in water, which is an exothermic process releasing energy due to the hydration of ions by water molecules.

Yes, the sign of δs° obtained in question 3b is consistent with the expectations of dissolving a salt in water. When a salt dissolves in water, the process is exothermic, meaning it releases heat into the surrounding environment. This is because the salt ions are surrounded by water molecules, which form hydration shells around the ions and release energy as they do so. This release of energy results in a negative value for δs°, which is exactly what was obtained in question 3b. Therefore, the sign of δs° is consistent with the expected behavior of salt dissolution in water.

learn more about exothermic process here:

https://brainly.com/question/29866491

#SPJ11

The angular speed of the stone is 3π rad/s (since 15 revolutions = 30π radians, and it takes 10 seconds to complete those revolutions). The linear speed of the stone is 90π/10 ft/s = 9π ft/s (since the distance traveled by the stone in 10 seconds is 90π feet).

In this problem, we are asked to find the angular and linear velocities of a stone that is being rotated in a sling. We are given that the sling is 3 feet long and that the stone completes 15 revolutions in 10 seconds. To find the angular velocity, we use the formula: angular speed = change in angle/time. Since the stone completes 15 revolutions, the change in angle is 152pi radians. Dividing by time, we get an angular speed of 3*pi radians per second.

To find the linear velocity, we need to find the distance traveled by the stone in 10 seconds. Since the sling is 3 feet long, the stone travels a distance of 2pi3 feet for every revolution. Multiplying by the number of revolutions in 10 seconds, we get a distance of 90 pi feet. Dividing by the time, we get a linear velocity of 9pi feet per second.

Therefore, the angular velocity of the stone is 3pi radians per second and the linear velocity is 9pi feet per second.

learn more about velocities here:

https://brainly.com/question/28710636

#SPJ11

The amount of carbon dioxide produced from the combustion of a candle formula depends on the specific formula and the mass of the candle. However, on average, the combustion of one gram of wax in a candle produces approximately 3 grams of carbon dioxide.

Most candles are made of paraffin wax, which is a hydrocarbon with the general formula CnH2n+2. Let's assume that we are dealing with a simple hydrocarbon, such as C25H52 (a common component of paraffin wax).

During combustion, the hydrocarbon reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). The balanced chemical equation for the combustion of C25H52 is:

C25H52 + 38O2 → 25CO2 + 26H2O

To find the grams of CO2 produced, we need to know the mass of C25H52 that is combusted. For example, let's say we have 1 mole of C25H52 (molecular weight = 25*12.01 + 52*1.01 = 352.76 g/mol).

From the balanced equation, 1 mole of C25H52 produces 25 moles of CO2. The molecular weight of CO2 is 12.01 (C) + 2*16.00 (O) = 44.01 g/mol. So, the mass of CO2 produced from 1 mole of C25H52 is:

25 moles CO2 * 44.01 g/mol = 1100.25 grams of CO2

So, in this example, the combustion of 1 mole (352.76 grams) of C25H52 from a candle produces 1100.25 grams of carbon dioxide.

Learn more about combustion at: brainly.com/question/15117038

#SPJ11

True. Tripolidine possesses two nitrogen atoms, but only one of them is available to function as a base. This is because the other nitrogen atom is involved in other chemical bonds, limiting its availability to act as a base.

Two nitrogen atoms are securely linked together to form the chemical molecule known as molecular nitrogen (N2). At normal temperatures generally pressures, molecular nitrogen is an odorless, colorless, tasteless, and inert gas. There are four ways that chemists may describe nitrogen compounds.An atom of nitrogen so shares three electrons alongside another atom of nitrogen. As a result, two nitrogen atoms create a triple bond.Nitrogen typically contains 3 bonds, but it may also have 4. If it does, it will be charged upwards. If the nitrogen molecule is negatively charged, nitrogen may potentially have two bonds.

learn more about nitrogen here

https://brainly.com/question/16711904

SPJ11

There are 1.987 x 10²² atoms are present in 6.27g of F₂

To determine the number of atoms  in 6.27 g of F₂, we'll use the following steps:

1. Convert grams of F₂ to moles using the molar mass of F₂.
2. Determine the number of F atoms in a mole of F₂.
3. Calculate the total number of F atoms using Avogadro's number.

Step 1: The molar mass of F2 is 2 × 19 g/mol (since there are two F atoms, and each F atom has a molar mass of 19 g/mol). So, 6.27 g of F₂ × (1 mol F2 / 38 g F₂) = 0.165 moles of F₂.

Step 2: In one mole of F₂, there are two moles of F atoms (since each F₂ molecule contains two F atoms).

Step 3: Calculate the total number of F atoms using Avogadro's number. 0.165 moles of F × 2 moles of F atoms/mol F₂× (6.02 × 10²³ atoms/mol) = 1.987 × 10²³F atoms.

Since you want the non-exponential part of the value, the answer is 1.987 x 10²² atoms in 6.27 g of F₂.

To learn more about avogadro's number https://brainly.com/question/859564

#SPJ11

A)If 0.863 mole of [tex]NH_3[/tex] are produced, 0.4315 moles of [tex]N_2[/tex] must have reacted and B) If 0.863 mol [tex]NH_3[/tex] are produced, 1.2945 mole of [tex]H_2[/tex] must have reacted.

A) To determine the moles of [tex]N_2[/tex] that reacted, we can use the stoichiometric coefficients from the balanced chemical equation: [tex]N_2 (g) + 3 H_2 (g) --> 2 NH_3 (g)[/tex]
According to the balanced equation, 1 mol of [tex]N_2[/tex] reacts to produce 2 mol of  [tex]NH_3[/tex]. To find the moles of [tex]N_2[/tex] that reacted to produce 0.863 mol [tex]NH_3[/tex], we can set up a proportion:
(1 mol [tex]N_2[/tex] / 2 mol  [tex]NH_3[/tex]) = (x mol [tex]N_2[/tex] / 0.863 mol [tex]NH_3[/tex])
Solving for x:
x mol [tex]N_2[/tex] = (1 mol [tex]N_2[/tex] / 2 mol  [tex]NH_3[/tex]) * 0.863 mol  [tex]NH_3[/tex]
x mol [tex]N_2[/tex] = 0.4315 mol [tex]N_2[/tex]
So, 0.4315 mol [tex]N_2[/tex] must have reacted.
B) Now, to determine the moles of [tex]H_2[/tex] that reacted, we can use the stoichiometric coefficients again:
According to the balanced equation, 3 mol of [tex]H_2[/tex] reacts to produce 2 mol of  [tex]NH_3[/tex]. To find the moles of [tex]H_2[/tex] that reacted to produce 0.863 mol  [tex]NH_3[/tex], we can set up another proportion:
(3 mol [tex]H_2[/tex] / 2 mol  [tex]NH_3[/tex]) = (y mol [tex]H_2[/tex] / 0.863 mol  [tex]NH_3[/tex])
Solving for y:
y mol [tex]H_2[/tex] = (3 mol [tex]H_2[/tex] / 2 mol  [tex]NH_3[/tex]) * 0.863 mol  [tex]NH_3[/tex]
y mol [tex]H_2[/tex] = 1.2945 mol [tex]H_2[/tex]
So, 1.2945 mol [tex]H_2[/tex] must have reacted.

To learn more about moles click here https://brainly.com/question/26416088

#SPJ11

The volume in milliliters of 0.7513 M NaOH standard solution needed to neutralize 50.00 ml of 0.3442 M tartaric acid is 45.8 mL.

To solve this problem, we need to use the equation for molarity:

Molarity (M) = moles (mol) / volume (L)

First, let's calculate the moles of tartaric acid in 50.00 ml of 0.3442 M solution:

mol tartaric acid = Molarity x Volume = 0.3442 mol/L x 0.05000 L = 0.01721 mol

Since the mole ratio from the balanced chemical equation for the reaction between tartaric acid and NaOH is 1:2, we know that we will need twice as many moles of NaOH to neutralize the tartaric acid. Therefore, we need:

mol NaOH = 2 x mol tartaric acid = 2 x 0.01721 mol = 0.03442 mol

Now we can use the molarity of the NaOH solution to calculate the volume of solution we need:

Molarity (NaOH) = moles (NaOH) / volume (NaOH)

0.7513 mol/L = 0.03442 mol / volume (NaOH)

volume (NaOH) = 0.03442 mol / 0.7513 mol/L = 0.0458 L

Finally, we need to convert liters to milliliters:

volume (NaOH) = 0.0458 L x 1000 mL/L = 45.8 mL

Therefore, we need 45.8 mL of 0.7513 M NaOH solution to neutralize 50.00 mL of 0.3442 M tartaric acid.

Learn more about molarity here: https://brainly.com/question/30404105

#SPJ11

The volume in milliliters of 0.7513 M NaOH standard solution needed to neutralize 50.00 ml of 0.3442 M tartaric acid is 45.8 mL.

To solve this problem, we need to use the equation for molarity:

Molarity (M) = moles (mol) / volume (L)

First, let's calculate the moles of tartaric acid in 50.00 ml of 0.3442 M solution:

mol tartaric acid = Molarity x Volume = 0.3442 mol/L x 0.05000 L = 0.01721 mol

Since the mole ratio from the balanced chemical equation for the reaction between tartaric acid and NaOH is 1:2, we know that we will need twice as many moles of NaOH to neutralize the tartaric acid. Therefore, we need:

mol NaOH = 2 x mol tartaric acid = 2 x 0.01721 mol = 0.03442 mol

Now we can use the molarity of the NaOH solution to calculate the volume of solution we need:

Molarity (NaOH) = moles (NaOH) / volume (NaOH)

0.7513 mol/L = 0.03442 mol / volume (NaOH)

volume (NaOH) = 0.03442 mol / 0.7513 mol/L = 0.0458 L

Finally, we need to convert liters to milliliters:

volume (NaOH) = 0.0458 L x 1000 mL/L = 45.8 mL

Therefore, we need 45.8 mL of 0.7513 M NaOH solution to neutralize 50.00 mL of 0.3442 M tartaric acid.

Learn more about molarity here: https://brainly.com/question/30404105

#SPJ11

The balanced chemical equation for the reaction between phosphoric acid (H3PO4) and strontium hydroxide (Sr(OH)2) is:

2 H3PO4 + 3 Sr(OH)2 → Sr3(PO4)2 + 6 H2O

To determine the mass of precipitate produced when 25.0 mL of 0.750 M strontium hydroxide reacts with 45.0 mL of 0.500 M phosphoric acid, we need to determine which reactant is limiting and use stoichiometry to find the amount of product produced.

First, we can calculate the moles of each reactant:

moles of Sr(OH)2 = (0.750 mol/L) x (0.0250 L) = 0.0188 mol

moles of H3PO4 = (0.500 mol/L) x (0.0450 L) = 0.0225 mol

Since there are more moles of H3PO4 than Sr(OH)2, Sr(OH)2 is the limiting reactant. Using the balanced chemical equation, we can calculate the moles of Sr3(PO4)2 produced:

moles of Sr3(PO4)2 = (0.0188 mol Sr(OH)2) x (1 mol Sr3(PO4)2 / 3 mol Sr(OH)2) = 0.00627 mol

Finally, we can use the molar mass of Sr3(PO4)2 to calculate the mass of precipitate produced:

mass of Sr3(PO4)2 = (0.00627 mol) x (452.12 g/mol) = 2.84 g

Therefore, the mass of precipitate produced is 2.84 g.

To determine the volume of a 1.50 M strontium hydroxide solution required to completely neutralize 50.0 mL of a 0.675 M phosphoric acid solution, we can use stoichiometry and the balanced chemical equation:

2 H3PO4 + 3 Sr(OH)2 → Sr3(PO4)2 + 6 H2O

From the equation, we can see that 2 moles of H3PO4 react with 3 moles of Sr(OH)2, so the mole ratio of H3PO4 to Sr(OH)2 is 2:3.

First, we can calculate the moles of H3PO4 in 50.0 mL of 0.675 M solution:

moles of H3PO4 = (0.675 mol/L) x (0.0500 L) = 0.0338 mol

Using the mole ratio, we can calculate the moles of Sr(OH)2 required to react with all of the H3PO4:

moles of Sr(OH)2 = (0.0338 mol H3PO4) x (3 mol Sr(OH)2 / 2 mol H3PO4) = 0.0507 mol

Finally, we can calculate the volume of 1.50 M Sr(OH)2 required to provide this many moles:

volume of Sr(OH)2 = (0.0507 mol) / (1.50 mol/L) = 0.0338 L or 33.8 mL

Therefore, 33.8 mL of 1.50 M Sr(OH)2 solution is required to completely neutralize 50.0 mL of 0.675 M phosphoric acid solution.

learn more abouT Phosphoric acid  here:

https://brainly.com/question/30459610

#SPJ4

The iron rod absorbs 645.75 Joules of heat as it warms from -4°C to 37°C.

To calculate the amount of heat absorbed by the iron rod, we need to use the specific heat capacity of iron, which is 0.45 J/g°C.

First, we need to calculate the change in temperature:

ΔT = 37°C - (-4°C) = 41°C

Next, we can use the formula:

Q = m x c x ΔT

Where:
Q = heat absorbed (in Joules)
m = mass of the iron rod (in grams)
c = specific heat capacity of iron (in J/g°C)
ΔT = change in temperature (in °C)

Plugging in the values, we get:

Q = 35 g x 0.45 J/g°C x 41°C
Q = 645.75 J

Therefore, the iron rod absorbs 645.75 Joules of heat as it warms from -4°C to 37°C.

Learn more about heat capacity : brainly.com/question/28302909

#SPJ11

The concentration of OH⁻(aq) in a saturated solution of Ca(OH)₂(aq) is approximately 2.78 × 10⁻² M.

To find the concentration of OH⁻(aq) in a saturated solution of Ca(OH)₂(aq), we can set up an equation using the solubility product constant (Ksp) expression.

Ksp = [Ca²⁺][OH⁻]²

Since Ca(OH)2 dissociates into 1 Ca²⁺ and 2 OH⁻ ions, let the concentration of Ca²⁺ be x and the concentration of OH⁻ be 2x. Now we can substitute these values into the Ksp expression:

5.741 × 10⁻⁵ = [x][(2x)²]

Solve for x (which represents [Ca²⁺]):

x ≈ 1.39 × 10⁻² M

Now, find the concentration of OH⁻:

[OH⁻] = 2x ≈ 2(1.39 × 10⁻) = 2.78 × 10⁻² M

Therefore, in a saturated solution of Ca(OH)₂(aq), the concentration of OH⁻(aq) at 25°C is approximately 2.78 × 10⁻² M.

Learn more about solubility product constant (Ksp) here: https://brainly.com/question/29350479

#SPJ11

The functional group missing is alcohol. So, the answer is C.

When discussing molecules, it is important to consider their functional groups, which determine their properties and behaviors.

The four molecule groups that were mentioned in the question refer to carbons and hydrogens, which are known as alkanes, alkenes, alkynes, and cycloalkanes. However, there is a key functional group missing from this list.

The answer is (c) alcohol, which consists of an -OH group bonded to a carbon atom. Alcohols are important in many biological and industrial processes, and they can have varying degrees of solubility and reactivity depending on their structure.

Understanding the functional groups present in a molecule is crucial for predicting its behavior and interactions with other compounds, making it an essential concept in chemistry.

Learn more about molecule group at

https://brainly.com/question/18915679

#SPJ11

ΔHrm for the given reaction can be calculated as follows: [tex]ΔHrm = ΣnΔHf(products) - ΣnΔHf(reactants)[/tex] , [tex]ΔHrm = [2(-393.5) + 2(-241.8)] - [-1411 + (-285.8)][/tex],

[tex]ΔHrm = -136.4 kJ/mole[/tex]

The negative value of ΔHrm indicates that the reaction is exothermic, which means that energy is released by the system during the reaction.

The amount of heat transferred between the system and surroundings can be calculated using the equation:

[tex]q = ΔHrxn × n[/tex]

[tex]q = (-136.4 kJ/mole) × (3.5 moles)[/tex]

[tex]q = -477.4 kJ[/tex]

Therefore, the system releases 477.4 kJ of heat to the surroundings during the reaction.

learn more about reaction here:

https://brainly.com/question/28984750

#SPJ11

The density of O₂ gas under these conditions is 1.16 g/L.

To calculate the density of O₂ gas, we'll use the formula:

density = (mass of O₂) / volume

1. First, find the mass of O₂ by multiplying the moles (0.278 mol) by its molar mass (32 g/mol):
mass = 0.278 mol * 32 g/mol = 8.896 g

2. Next, divide the mass of O₂ (8.896 g) by the volume of the flask (8.00 L):
density = 8.896 g / 8.00 L = 1.112 g/L

However, since the gas is at room temperature and pressure, we need to account for the ideal gas law (PV=nRT) to adjust the density for these conditions. Assuming the room temperature is 298 K and the pressure is 1 atm, we can calculate the adjusted density:

3. Use the ideal gas law to find the volume of O₂ at room temperature and pressure:
PV = nRT
(1 atm) * V = (0.278 mol) * (0.0821 L atm/mol K) * (298 K)
V = 6.796 L

4. Divide the mass of O₂ (8.896 g) by the adjusted volume (6.796 L) to find the density:
density = 8.896 g / 6.796 L = 1.16 g/L

To know more about ideal gas law click on below link:

https://brainly.com/question/28257995#

#SPJ11

The first step is to determine the number of moles of aluminum present in the sample:

moles of Al = mass of Al / molar mass of Al

moles of Al = 1000 g / 26.98 g/mol

moles of Al = 37.05 mol

Next, we can calculate the energy that must be removed as heat:

ΔH = nCΔT

ΔH = (37.05 mol) x (24.35 J/K mol) x (300 K - 250 K)

ΔH = -44,022.75 J

So the energy that must be removed as heat is -44,022.75 J.

Finally, we can calculate the change in entropy of the sample using the formula:

ΔS = nCln(T2/T1)

ΔS = (37.05 mol) x (24.35 J/K mol) ln(250 K/300 K)

ΔS = -37.39 J/K

So the change in entropy of the sample is -37.39 J/K.

Visit here to learn more about molar mass brainly.com/question/22997914

#SPJ11

When 0.950 g of KHT is dissolved in 25.00 ml of water, its molar solubility (measured in mol/l) is 0.202 mol/L.

Molar solubility is the number of moles of a solute that can dissolve in a solvent before the solvent reaches saturation.

To calculate the molar solubility of KHT (potassium hydrogen tartrate), we need to first find the number of moles of KHT present in 0.950 g.

The molar mass of KHT is 188.18 g/mol (39.10 g/mol for potassium + 133.08 g/mol for hydrogen tartrate).

Using the formula:

moles = mass/molar mass

We can calculate the moles of KHT as:

moles = 0.950 g / 188.18 g/mol = 0.00505 moles

Now, we need to find the volume of the solution in liters.

25.00 ml is equal to 0.025 L.

Finally, we can use the formula for molar solubility:

molar solubility = moles of solute/volume of solution in liters

molar solubility = 0.00505 moles / 0.025 L = 0.202 M

Therefore, the molar solubility of KHT in this solution is 0.202 mol/L.

Learn more about molar solubility: https://brainly.com/question/28566275

#SPJ11

There are multiple proteins that could be referred to as "XL αs," and the amino acid sequence would depend on the specific protein in question.

What is Amino Acid?

Amino acids are organic compounds that serve as the building blocks of proteins. They contain both amino (-NH2) and carboxyl (-COOH) functional groups, as well as a unique side chain group that determines the chemical and physical properties of each amino acid. There are 20 different types of amino acids commonly found in proteins, each with a different side chain.

Proteins are composed of amino acids that are linked together through peptide bonds to form a polypeptide chain. The sequence of amino acids in a protein determines its overall structure and function.

Learn more about Amino Acid from the given link

https://brainly.com/question/14351754

#SPJ1