The molecules you use in a chemical reaction are called the:

Answer: C

Explanation:

Answer:

C.

Explanation:

:)

Answer:

A) [H3PO4] will increase, [KH2PO4] will decrease, and pH will slightly decrease.

Explanation:

A buffer is a solution which resists changes to its pH when a small amount of acid or base is added to it.

Buffers consist of a weak acid (HA) and its conjugate base (A–) or a weak base and its conjugate acid. Weak acids and bases do not completely dissociate in water, and instead exist in solution as an equilibrium of dissociated and undissociated species. When a small quantity of a strong acid is added to a buffer solution, the conjugate base, A-, reacts with the hydrogen ions from the added acid to form the weak acid and a salt thereby removing the extra hydrogen ions from the solution and keeping the pH of the solution fairly constant. On the other hand, if a small quantity of a strong base is added to the buffer solution, the weak acid dissociates further to release hydrogen ions which then react with the hydroxide ions of the added base to form water and the conjugate base.

For example, if a small amount of strong acid is added to a buffer solution that is 0.700 M H3PO4 and 0.700 M KH2PO4, the following reaction is obtained:

KH₂PO₄ + H+ ----> K+ + H₃PO₄

Therefore, [H₃PO₄] will increase, [KH₂PO₄] will decrease, and pH will slightly decrease.:

Answer:

It determines how difficult it is to start the reaction.

Explanation:

Answer:

Y = 92.5 %

Explanation:

Hello there!

In this case, since the reaction between lead (II) nitrate and potassium bromide is:

[tex]Pb(NO_3)_2+2KBr\rightarrow PbBr_2+2KNO_3[/tex]

Exhibits a 1:2 mole ratio of the former to the later, we can calculate the moles of lead (II) bromide product to figure out the limiting reactant:

[tex]0.125L*0.150\frac{molPb(NO_3)_2}{L} *\frac{1molPbBr_2}{1molPb(NO_3)_2} =0.01875molPbBr_2\\\\0.145L*0.200\frac{molKBr}{L} *\frac{1molPbBr_2}{2molKBr} =0.0145molPbBr_2[/tex]

Thus, the limiting reactant is the KBr as it yields the fewest moles of PbBr2 product. Afterwards, we calculate the mass of product by using its molar mass:

[tex]0.0145molPbBr_2*\frac{367.01gPbBr_2}{1molPbBr_2} =5.32gPbBr_2[/tex]

And the resulting percent yield:

[tex]Y=\frac{4.92g}{5.32g} *100\%\\\\Y=92.5\%[/tex]

Regards!

Answer:

I think A should be the answer because oxygen is the chemical change of carbon.

Answer:

There isn't enough information to answer you're question.

Explanation:

Have a great day!!!

Answer:

D) doubles the rate

Explanation:

The given reaction is :

[tex]$CH_3Br + OH^- \rightarrow CH_3OH+Br^-$[/tex]

For the [tex]SN^2[/tex] reaction, the rate of reaction depends upon the concentration of both the [tex]$\text{alkyl halide}$[/tex] as well as the [tex]\text{nucleophile.}[/tex]

That is the rate = [tex]$k[CH_3Br][OH^-]$[/tex]

Now if the [tex]$[CH_3Br]$[/tex] becomes [tex]$2[CH_3Br]$[/tex], then the rate becomes double.

So the rate' is :

= [tex]$2k[CH_3Br][OH^-]$[/tex]

= 2 x rate

Therefore, the answer is (D) doubles the rate.

Answer:

Copper monobromide.

Explanation:

To name the compound, we shall determine the oxidation number of copper in CuBr. This can be obtained as follow:

Br = –1

Cu =?

CuBr = 0

Cu + (–1) = 0

Cu – 1 = 0

Collect like terms

Cu = 0 + 1

Cu = +1

Thus, oxidation number of copper in CuBr is +1.

Therefore, the name of the compound is copper (I) bromide or copper monobromide

Answer:

NH3 is the base and NH4Cl is the salt.

Explanation:

Hello there!

In this case, according to the given information, it is possible for us to rewrite the chemical equation and thus obtain:

[tex]NH_3+HCl\rightarrow NH_4Cl[/tex]

Whereas it is possible to notice that ammonia, NH3, received the hydrogen ions from HCl to form NH4 ions and Cl ions; in such a way, we infer that NH3 is the base and NH4Cl is the salt.

Regards!

Answer:

NH3 is the base and NH4Cl is the salt

Explanation:

The more finely divided the solid is, the faster the reaction happens. A powdered solid will normally produce faster reaction than if the same mass is present as a single lump. The powdered solid has a greater surface than the single lump

Explanation:

Mark as brainlist

Answer:

B porque si :) y eso Jsksjs

Answer:A

Because it's an amino acid and all amino acids are key to any part of your body.

Answer:

% yield =  82.5%

Explanation:

HgO + 2Cl₂ →  HgCl₂ +  Cl₂O

Our reactants are:

Our products are:

We do not have information about moles of reactants, but we do know the theoretical yield and the grams of product, in this case Cl₂O, we have produced.

Percent yield = (Yield produced / Theoretical yield) . 100

Theoretical yield is the mass of product which is produced by sufficent reactant. We replace data:

% yield = (0.71 g/0.86g) . 100 = 82.5%

The percent % yield =  82.5%

The balanced chemical equation will be:

HgO + 2Cl₂ →  HgCl₂ +  Cl₂O

The reactants participating in this reaction are: HgO and Cl₂

The products so formed are: HgCl₂ +  Cl₂O

[tex]\text{ Percent yield} = \frac{\text{Yield produced}}{\text{Theoretical yield}} *100[/tex]

The theoretical yield is the maximum possible mass of a product that can be made in a chemical reaction.

[tex]\text{Percent yield}= \frac{0.71 g}{0.86g} * 100 \\\\\text{Percent yield}= 82.5\%[/tex]

Thus, the percent yield is 82.5%.

Learn more:

brainly.com/question/25996347

Answer:

36g

Explanation:

you need to know the equation mass=moles*mr (in this case mr of carbon which is 12)

so 3*12=36g

hope this helps :)

Answer:

17.48

Explanation:

mass=density×volume

= 0.713g/ml × 24.5 ml

= 17.4685

≈ 17.47

Answer:

Diasteriomers

Stereoisomers

Stereoisomers

Meso compounds

Constitutional isomers

Enantiomers

Enantiomers

Explanation:

Isomers are compounds that posses the same molecular formula but different structural formulas.

Constitutional isomers differ only in atom to atom connectivity while stereoisomers differ in arrangement of atoms in space. Stereo isomers differ in physical and chemical properties of the compounds.

When stereo isomers are non-superimpossible mirror images of each other, they are called enantiomers. Enantiomers have the same chemical and physical properties and differ only in their reaction with chiral substances.

Achiral compounds are compounds that do not exhibit chirality. Some achiral compounds contain stereogenic centers and are called meso compounds.

From the question given above, the following data were obtained:

Oxygen = 45.2 Kg

Carbon = 12.6 Kg

Hydrogen = 7 Kg

Nitrogen = 2 Kg

Calcium = 1.3 Kg

Phosphorus = 0.78 Kg

Potassium = 0.25 Kg

Sulphur = 0.18 Kg

Others = 0.60 Kg

Total = 70 Kg

We can obtain the fraction of potassium of the mass of the body as follow:

Potassium = 0.25 Kg

Total = 70 Kg

Fraction of potassium = mass of potassium / Total

Fraction of potassium = 0.25 / 70

Therefore, the fraction of potassium in the body is 1/280

Learn more: https://brainly.com/question/14760859

Answer:

be is the answer to your question

It was formed 15,000 to 20,000 years ago from andesite flows and was later intruded by a hornblende dacite dome. Since the end of the last ice age, Shastina cone was built by mostly pyroxene andesite lava flows.

Explanation:

Answer:

18%.0

Explanation:

hipe it helps

pa brainlist

Answer:

1. alpha -  decreased mass by 4  - decrease atomic number by 2

2. beta electron - no change - increase by 1

3 - beta positron - no change - decrease by 1

4. gamma - no change - no change

5. electron capture - no change - decrease by 1

Explanation:

There are five main types of radioactive decay, a process where the nucleus loses energy by emitting radiation, these radiation or type of radioactive decay are alpha particles, beta particles, positron or beta positron, gamma particles and electron capture.

The effect of these particles causes a change in the number of subatomic which leads to different atomic mass and atomic numbers after the decay -

1. alpha -  decreased mass by 4  - decrease the atomic number by 2

2. beta electron - no change - increase by 1

3 - beta positron - no change - decrease by 1

4. gamma - no change - no change

5. electron capture - no change - decrease by 1

Answer:

A functional group in organic chemistry is an atom or group of atoms that is responsible for the specific properties of an organic compound. Some examples of functional groups include alcohols, alkyl halides, ethers, aldehydes, ketones, amines, carboxylic acids, and esters.

Functional groups also play an important part in organic compound nomenclature; combining the names of the functional groups with the names of the parent organic compounds provides a way to distinguish compounds.

The atoms of a functional group are linked together and to the rest of the compound by covalent bonds. The first carbon atom that attaches to the functional group is referred to as the alpha carbon; the second, the beta carbon; the third, the gamma carbon, etc. Similarly, a functional group can be referred to as primary, secondary, or tertiary, depending on if it is attached to one, two, or three carbon atoms.  

Answer:

Mass of mercury produced = 2.00 g

Explanation:

At room temperature and pressure, the temperature T = 25° C or 298.15 K while the pressure = 1 atmosphere or 760 mmHg.

Mass of oxide of mercury decomposed at room temperature and pressure = 2.16 g

Volume of oxygen produced = 120 cm³ or 0.12 dm³

One mole of any gas has a volume of 24 dm³ at room temperature and pressure.

Therefore, number of moles of oxygen produced = 0.12 dm³ / 24 dm³/mol = 0.005 moles

Mass of oxygen produced = number of moles × molar mass

Molar mass of oxygen = 32 g/mol

Mass of oxygen produced = 0.005 moles × 32 g/mol = 0.16 g

Thus, mass of mercury produced = mass of mercury oxide decomposed - mass of oxygen produced

Mass of mercury produced = 2.16 g - 0.16 g

Mass of mercury produced = 2.00 g

Answer:

The correct answer is - hard water reacts to form the calcium or magnesium salt of the organic acid of the soap.

Explanation:

Soaps are made up of fatty acids or oils by treating with strong alkali and are salts of sodium and potassium. Hard water, on the other hand, has a high concentration of minerals in comparison to soft water. When hard water and soap are mixed together the salts of the minerals like Ca2+ and Mg2+ ions present in hard water react with fatty acids of the soap.

The sodium salts are changed to the salts of calcium and magnesium which are precipitated to an insoluble substance. The insoluble salts of the calcium or magnesium dirt stick on the clothes thus cleaning ability of soap is reduced.

3

And then for Fe it should be 4 and for the products it should be 2!!

Answer:

See explanation

Explanation:

Number of moles of Copper sulphate = 0.18 M × 6.5/1000= 1.17 × 10^-3 moles of CuSO4

From;

number of moles = mass/molar mass

Molar mass of copper II sulphate = 160g/mol

1.17 × 10^-3 moles = mass/160g/mol

Mass = 1.17 × 10^-3 moles ×160

Mass = 0.187 g

If 1 mole contains 6.02 × 10^23 molecules

1.17 × 10^-3 moles contains 1.17 × 10^-3 moles × 6.02 × 10^23/1 = 7 × 10^20 molecules

From;

C1 V1=C2 V2

0.18 × 6.5 =C2 × 10.5

C2 = 0.18 × 6.5/10.5

C2=0.11 M

CuSO4(aq) + 2NaOH(aq) ----> Cu(OH)2(s) + Na2SO4(aq)

1 mole of CuSO4 yields 1 mole of Cu(OH)2

1.17 × 10^-3 moles of CuSO4 yields 1.17 × 10^-3 moles of Cu(OH)2

Mass of Cu(OH)2 = 1.17 × 10^-3 moles × 98g/mol= 0.11g of Cu(OH)2

Answer:

CuCl2 (aq) + 2 KOH (aq) → Cu(OH)2 (s) + 2 KCl (aq)

Explanation:

I did it.

Answer:

CuCl2 + 2KOH------------------>Cu(OH)2 + 2KCl

Explanation:

this is the right solution of equation

Answer:

-1.6 × 10⁻⁹ z

Explanation:

To attempt this type of question, we need to first divide each charge present in the question with the smallest one.

i.e.

[tex]A = \dfrac{-4.8 \times 10^{-9}}{-4.8 \times 10^{-9}}= 1[/tex]

[tex]B = \dfrac{-9.6 \times 10^{-9}}{-4.8 \times 10^{-9}}= 2[/tex]

[tex]C= \dfrac{-6.4 \times 10^{-9}}{-4.8 \times 10^{-9}}= 1.33[/tex]

[tex]D= \dfrac{-12.8 \times 10^{-9}}{-4.8 \times 10^{-9}}= 2.67 \simeq 3[/tex]

The next thing to do is to multiply each obtained value with the highest integer

A = 1 × 3 = 3

B = 2 × 3 = 6

C = 1.33 × 3 = 3.99

D = 3 × 3 = 9

Finally, we divide each charge by the result from above.

[tex]A = \dfrac{-4.8 \times 10^{-9}}{3}= -1.6 \times 10^{-9}[/tex]

[tex]B = \dfrac{-9.6 \times 10^{-9}}{6}= -1.6\times 10^{-9}[/tex]

[tex]C= \dfrac{-6.4 \times 10^{-9}}{3.99}= -1.6\times 10^{-9}[/tex]

Thus, we can therefore easily conclude that the charge in zorgs (z) is:

-1.6 × 10⁻⁹ z